Quick Installation Guide WM294V2-E01 WLAN USB interface Module 802.11b/g/n (1T1R) Version 13.5 November 20, 2017 WM294V2-E01 Quick Installation Guide
Product Model Power Supply Rating Modulation Type Modulation Technology Transfer Rate Operating Frequency Number of Channel Antenna Type Operating Temperature Type 1 Product Specification WLAN USB interface Module (802.11b/g/n) WM294V2-E01 5 Vdc / 500 mA BPSK, QPSK, 16QAM, 64QAM IEEE 802.11b: DSSS IEEE 802.11g/n: OFDM 1, 2, 5.5, 6, 11, 12, 18, 22, 24, 30, 36, 48, 54, 60, 90, 120 and up to 150 Mbps 2412 MHz 2462 MHz 802.11b, 802.11g, 802.11n (HT20): 11 802.11n (HT40): 7 Multilayer Chip Antenna Peak Gain: 0.5 dBi typ. Average Gain: -0.5 dBi typ. 0C 50C ambient temperature Interface Type 2 Type 3 Page 2 WM294V2-E01 Quick Installation Guide
Installing the WLAN module driver NOTE The illustrations may look different on your operating system. To install the WLAN module driver, follow the steps below:
Step 1:
Close all other applications before continuing. Step 2:
1. Insert the WLAN module into the USB port of your computer. 2. When the REALTEK USB Wireless LAN Driver and Utility window appears, click Next. Step 3:
Follow the on-screen instructions to install the REALTEK USB Wireless LAN driver. Step 4:
When the installation is completed, select Yes, I want to restart my computer now., and then click Finish. Page 3 WM294V2-E01 Quick Installation Guide
Setting up the WLAN module driver Step 1:
On your desktop, click the REALTEK USB Wireless LA.. icon. Step 2:
In the Available Network tab, select the network you want to connect to. Step 3:
When the Wireless Network Properties window appears, click OK. Page 4 WM294V2-E01 Quick Installation Guide
Step 4:
Check the network connection status in the General tab. Page 5 WM294V2-E01 Quick Installation Guide
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
/Canada market, only channel 1~11 can be operated. Selection of other channels is IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. A minimum distance of 20 cm must be maintained between the user and the antenna of the integrated module. Under such configuration, the FCC radiation exposure limits set forth for a population/uncontrolled environment can be satisfied. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20 cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. Page 6 WM294V2-E01 Quick Installation Guide
If the size of the end product is smaller than 8 cm x 10 cm, then additional FCC part 15.19 statement is required to be available in the users manual:
This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX FCC ID:
BKMFBWM294V2-E01 ". If the size of the end product is larger than 8 cm x 10 cm, then the following FCC part 15.19 statement has to also be available on the label:
This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Industry Canada statement ThisdevicecomplieswithISEDslicenceexemptRSSs.Operationissubjecttothefollowingtwoconditions:(1) Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived, includinginterferencethatmaycauseundesiredoperation. LeprsentappareilestconformeauxCNRdISEDapplicablesauxappareilsradioexemptsdelicence. Lexploitationestautoriseauxdeuxconditionssuivantes:(1)ledispositifnedoitpasproduiredebrouillage prjudiciable,et(2)cedispositifdoitacceptertoutbrouillagereu,ycomprisunbrouillagesusceptiblede provoquerunfonctionnementindsirable. Radiation Exposure Statement:
ThisequipmentcomplieswithISEDradiationexposurelimitssetforthforanuncontrolledenvironment.This equipmentshouldbeinstalledandoperatedwithminimumdistance20cmbetweentheradiator&yourbody. Dclaration d'exposition aux radiations:
Cetquipementestconformeauxlimitesd'expositionauxrayonnementsISEDtabliespourun environnementnoncontrl.Cetquipementdoittreinstalletutilisavecunminimumde20cmde distanceentrelasourcederayonnementetvotrecorps. ThisdeviceisintendedonlyforOEMintegratorsunderthefollowingconditions:(Formoduledeviceuse) 1)Theantennamustbeinstalledsuchthat20cmismaintainedbetweentheantennaandusers,and 2)Thetransmittermodulemaynotbecolocatedwithanyothertransmitterorantenna. Aslongas2 conditionsabovearemet,furthertransmittertestwillnotberequired.However,theOEM integratorisstillresponsiblefortestingtheirendproductforanyadditionalcompliancerequirements requiredwiththismoduleinstalled. CetappareilestconuuniquementpourlesintgrateursOEMdanslesconditionssuivantes:(Pourutilisation Page 7 WM294V2-E01 Quick Installation Guide
dedispositifmodule) 1)L'antennedoittreinstalledetellesortequ'unedistancede20cmestrespecteentrel'antenneetles utilisateurs,et 2)Lemodulemetteurpeutnepastrecomplantavecunautremetteurouantenne. Tantqueles2 conditionscidessussontremplies,desessaissupplmentairessurl'metteurneserontpas ncessaires.Toutefois,l'intgrateurOEMesttoujoursresponsabledesessaissursonproduitfinalpour toutesexigencesdeconformitsupplmentairesrequispourcemoduleinstall. IMPORTANT NOTE:
Intheeventthattheseconditionscannotbemet(forexamplecertainlaptopconfigurationsorcolocation withanothertransmitter),thentheCanadaauthorizationisnolongerconsideredvalidandtheICIDcannot beusedonthefinalproduct.Inthesecircumstances,theOEMintegratorwillberesponsibleforreevaluating theendproduct(includingthetransmitter)andobtainingaseparateCanadaauthorization. NOTE IMPORTANTE:
Danslecasocesconditionsnepeuventtresatisfaites(parexemplepourcertainesconfigurations d'ordinateurportableoudecertainescolocalisationavecunautremetteur),l'autorisationduCanadan'est plusconsidrcommevalideetl'IDICnepeutpastreutilissurleproduitfinal.Danscescirconstances, l'intgrateurOEMserachargdervaluerleproduitfinal(ycomprisl'metteur)etl'obtentiond'une autorisationdistincteauCanada. End Product Labeling Thistransmittermoduleisauthorizedonlyforuseindevicewheretheantennamaybeinstalledsuchthat20 cmmaybemaintainedbetweentheantennaandusers.Thefinalendproductmustbelabeledinavisible areawiththefollowing:ContainsIC:1052CWM294V2E01. Plaque signaltique du produit final Cemodulemetteurestautorisuniquementpouruneutilisationdansundispositifol'antennepeuttre installedetellesortequ'unedistancede20cmpeuttremaintenueentrel'antenneetlesutilisateurs.Le produitfinaldoittretiquetdansunendroitvisibleavecl'inscriptionsuivante:
"ContientdesIC:1052C-WM294V2E01". Manual Information To the End User TheOEMintegratorhastobeawarenottoprovideinformationtotheenduserregardinghowtoinstallor removethisRFmoduleintheusersmanualoftheendproductwhichintegratesthismodule.Theenduser manualshallincludeallrequiredregulatoryinformation/warningasshowinthismanual. Manuel d'information l'utilisateur final L'intgrateurOEMdoittreconscientdenepasfournirdesinformationsl'utilisateurfinalquantlafaon d'installeroudesupprimercemoduleRFdanslemanueldel'utilisateurduproduitfinalquiintgrece module.Lemanueldel'utilisateurfinaldoitincluretouteslesinformationsrglementairesrequiseset avertissementscommeindiqu danscemanuel. The telecommunications functionality of this product may be used in the following EU and European Union regulatory notice Page 8 WM294V2-E01 Quick Installation Guide
EFTA countries:
Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Notice for use in Russia For 2.4 GHz Wireless LAN operations (802.11 b/g) of this product certain restrictions apply:
This equipment may be used indoor for the entire 2400 MHz - 2483.5 MHz frequency band channels (1-13). For indoor use the maximum effective incident radiated power (EIRP) is 100 mW. BrazilANATELstatement Page 9