FCC ID: X5Y774-0788NB PUMA T3 Plus/806-870

P/N MAN-0696/01.01 P/N MAN-0696/01.01 P/N MAN-0696/01.01 P/N MAN-0696/01.01 Safety recommendations Hold the radio in a vertical position in front of face with the microphone (and the other parts of the radio, including the antenna) at least one inch (2.5 cm) away from the nose. Keeping the radio at the proper distance is important because RF exposures decrease with distance from the antenna. Antenna should be kept away from eyes. When worn on the body, always place the radio in a SELEX Elsag approved clip, holder, holster, case, or body harness for this product. Using approved body-worn accessories is important because the use of Selex Elsag or other manufacturer's non-approved accessories may result in exposure levels, which exceed the FCC's occupational/

controlled environment RF exposure limits. If you are not using a body-worn accessory and are not using the radio in the intended use position in front of the face, then ensure the antenna and the radio are kept at least 2.5 cm (one inch) from the body when transmitting. Keeping the radio at the proper distance is important because RF exposures decrease with increasing distance from the antenna. Use only SELEX Elsag approved supplied or replacement antennas, batteries, and accessories. Use of non-manufacturer-

name approved antennas, batteries, and accessories may exceed the FCC RF exposure guidelines. For a list of SELEX Elsag approved accessories (see the user manual), or (visit the following website which lists approved accessories: http://intranet.selexelsag.com, or (contact the radio manufacturer at customer.care@selexelsag.com) Contact Information For additional information on exposure requirements or other information, contact customer.care@selexelsag.com This equipment is marked According to the requirements specified in the R&TTE directive 1999/5/EC and the Commission Decision 6th April 2000, the EC marking is accompanied by the Class II equipment class identifier. The equipment (in the 380430 MHz and 410470 MHz versions) is intended for sell and use in AT, BE, CY, CZ, DK, EE, FI, FR, DE, GR, HU, IE, IT, LV, LT, LU, MT, NL, PL, PT, SK, SI, ES, SE, GB. This equipment requires authorization or license for use. This equipment operates on frequency bands non-harmonised in the EU. This equipment can also be used worldwide where the equipment is approved for use. FCC APPROVAL For US owners only FCC approval PUMA T3 Plus/806-870 Hand Held equipment complies with Part 15 of the FCC/Federal Communication Commission regulations. Operation is governed by the following:

FCC ID:

FCC ID:

These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions:

- these devices may not cause harmful interference, and

- these devices must accept any interference received, including interference that may cause undesired operation. X5Y774-0788 X5Y774-0788NB Any unauthorized modifications or changes to these devices could void the user's authority to operate these devices. Note:

FCC ID X5Y774-0788 and FCC ID X5Y774-0788NB apply to PUMA T3 Plus/806-870 versions only. Carefully read all of the cautions and warnings before using the radio:

Do not use the radio equipment for uses different than those indicated in the present guide. For a correct use of the radio read what is listed in this guide. Protect the radio from sprinklings of water and/or other liquids and from dust. Do not bring the radio close to heat sources. Do not place the hand-held radio above the airbags or in their area of action. If the airbag is activated, it may not swell correctly and/or hurl the portable unit, with great force, inside the passenger compartment where are located the vehicle occupants. The external antenna connector, not used during normal operations, must be protected by proper cover. First and second maintenance level interventions on the equipment are to be carried out by authorized technicians only. Third maintenance level interventions are to be carried out by SELEX technicians only. The maintenance levels are defined in the technical manual. Use only original accessories and spare parts, approved by the manufacturer, suitable for the PUMA T3 PLUS. The use of different accessories and/or spare parts (earphone, antenna, etc.) makes the safety and electromagnetic compatibility certifications to be valid no more and it could lower the user safety level and/or generate electromagnetic fields that exceed the accepted limits. Follow the battery charger instructions in order to use it correctly. During voice calls, the PUMA T3 PLUS use with its proper leather bag is recommended in environments whith temperature greater than 45 C. The emergency call is a priority type call. The hand-

held radio, like all mobile telephony equipment, operates with radio frequency signals, therefore, the forwarding of the call depends on the network coverage at the moment of the call. If you need send an emergency call, keep pressed the emergency button for at least 2 seconds, when the radio is switched on. In fact, a switched off radio can be turned on by keeping pressed the emergency key, but for an outgoing emergency call a new pressure of the related button must be done. Relating to the radio setting (from PRP), two cases may occur if the transmission is inhibit:

a) the emergency call is not sent; it is necessary to disable the Tx Inhibit function from radio menu to forward a call (even if the call is an emergency call). WARNING b) the emergency call is sent and automatically the Tx Inhibit function is disabled; from radio menu it is possible to recover the Tx Inhibit function again. P/N MAN-0696/01.01 P/N MAN-0696/01.01 P/N MAN-0696/01.01 P/N MAN-0696/01.01 The radio complies with all product specifications and great care is taken by the manufacturer so that user safety, as far as the effects of electromagnetic waves on health are concerned, is guaranteed within the limits established by the international specifications.In order to further increase the level of user safety, we invite you to take into consideration the following additional precautions:

The radio is equipped with an automatic system to control the power transmitted so that the radio transmits at the maximum power only in cases of radio coverage limit or emergency call. Avoid touching the antenna when the radio is on and especially during transmission because the ability of transmitting power gets worse. When the antenna is touched, the radio automatically transmits at a greater power level than that required, nevertheless the communication may be broken down or get qualitatively worse. Avoid touching the equipment during data transmission. During voice communications in earphone mode hold the hand-held radio with the antenna straight and above your shoulder and speak directly into the microphone. Hold the hand-held radio in the vertical position and always at least 3 cm away from your head during voice communications in loudspeaker mode. Earphone kit (and/or tube audio kit) is recommended when using the equipment in full-duplex mode for a long time. When using the earphone do not allow the cable to twist up around the radio forming spirals. PRECAUTION Carry out the maintenance interventions on the hand held radio following the instructions given in the technical manual. Follow all accident prevention standards when carrying out maintenance interventions on the hand held radio equipment and use the proper tools (spanners, screwdrivers,..). Do not use the radio if the antenna is damaged. Turn off the radio or inhibit transmission, if the equipment allows it, in electromagnetically sensitive environments

(ex. hospitals, airports, etc.). The electronic devices are sensitive to electromagnetic interference (EMI) if not adequately shielded, designed or configured differently for electromagnetic fields immunity. If electromedical equipment (ex. pace-makers, acoustical equipment, etc.) is used together with the hand held radio, make sure that it is adequately shielded from external electromagnetic fields. Use only battery chargers recommended by manufacturer and follow the instructions reported in the manual to recharge the battery. Replace the batteries with equivalent batteries approved by the manufacturer. Replace the batteries following the instructions given in the technical manual. Make sure that batteries are not damaged. Do not use the radio if the battery is damaged. Position the battery charger far from heat sources and in such a way as to guarantee its correct aeration as well as safe accessibility to the network power supply outlet. Do not use the battery charger outside of the environments for which it was specified (ex. use in indoor environments only). Do not use the battery charger if the power supply cable and/or the plug are damaged. Do not cause short circuits between the battery terminals, even if the terminals are provided of protection against accidental short circuits. Do not take the radio into environments that have a potentially explosive atmosphere (ex. fuel storage sites, filling stations, etc.). Even when it is off, the radio, being equipped with battery, might casually trigger fires and/or explosions. Do not use the battery charger in environments that have a potentially explosive atmosphere (ex. fuel storage sites, filling stations, etc.). The use of battery charger might trigger fires and/or explosions. The danger of explosion exist if the battery is incorrectly replaced. Even if the battery is discharge, the danger of explosion exist if the battery is disposed on fire. It is advisable the use of the connector covers, when the connectors are not used during normal operations. WARNING WARNING WARNING PRECAUTION RF energy exposure RF ENERGY EXPOSURE AWARENESS AND CONTROL INFORMATION, AND OPERATIONAL INSTRUCTIONS FOR FCC OCCUPATIONAL USE REQUIREMENTS BEFORE USING YOUR PORTABLE 2-WAY RADIO, READ THIS IMPORTANT RF ENERGY AWARENESS AND CONTROL INFORMATION AND OPERATIONAL INSTRUCTIONS TO ENSURE COMPLIANCE WITH THE FCC'S RF EXPOSURE GUIDELINES. NOTICE: This radio is intended for use in occupational/controlled conditions, where users have full knowledge of their exposure and can exercise control over their exposure to meet FCC limits. This radio device is NOT authorized for general population, consumer, or any other use. This 2-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or more users over a distance. It uses radio frequency (RF) energy or radio waves to send and receive calls. RF energy is one form of electromagnetic energy. Other forms include, but are not limited to, electric power, sunlight and x-rays. RF energy, however, should not be confused with these other forms of electromagnetic energy, which when used improperly can cause biological damage. Very high levels of x-rays, for example, can damage tissues and genetic material. Experts in science, engineering, medicine, health and industry work with organizations to develop standards for exposure to RF energy. These standards provide recommended levels of RF exposure for both workers and the general public. These recommended RF exposure levels include substantial margins of protection. All 2-way radios marketed in North America are designed, manufactured and tested to ensure they meet government established RF exposure levels. In addition, manufacturers also recommend specific operating instructions to users of 2-way radios. These instructions are important because they inform users about RF energy exposure and provide simple procedures on how to control it. Please refer to the following websites for more information on what RF energy exposure is and how to control your exposure to assure compliance with established RF exposure limits. http://www.fcc.gov/oet/rfsafety/rf-faqs.html http://www.osha.gov/SLTC/radiofrequencyradiation/index.html Federal Communications Commission Regulations The FCC rules require manufacturers to comply with the FCC RF energy exposure limits for portable 2-way radios before they can be marketed in the U.S. When 2-way radios are used as a consequence of employment, the FCC requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your SELEX Elsag 2-way radio has a RF exposure product label. Also, your SELEX Elsag user manual, or product manual, or separate safety booklet includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements. Compliance with RF Exposure Standards Your SELEX Elsag 2-way radio is designed and tested to comply with a number of national and international standards and guidelines (listed below) for human exposure to radio frequency electromagnetic energy. This radio complies with the IEEE and ICNIRP exposure limits for occupational/controlled RF exposure environment at operating duty factors of up to 25% transmitting and is authorized by the FCC for occupational use only. In terms of measuring RF energy for compliance with the FCC exposure guidelines, your radio radiates measurable RF energy only while it is transmitting (during talking), not when it is receiving (listening) or in standby mode. Note: The approved batteries supplied with this radio are rated for a 5-5-90 duty factor (5% talk-5% listen - 90% standby), even though this radio complies with the FCC occupational RF exposure limits and may operate at duty factors of up to 25% talk. Your SELEX Elsag 2-way radio complies with the following RF energy exposure standards and guidelines:

United States Federal Communications Commission, Code of Federal Regulations; 47 CFR 1.1307, 1.1310, 2.1091 and 2.1093 American National Standards Institute (ANSI)/Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992 Institute of Electrical and Electronic Engineers (IEEE) C95.1-

1999 Edition RF Exposure Compliance and Control Guidelines and Operating Instructions To control your exposure and ensure compliance with the occupational/controlled environment exposure limits always adhere to the following procedures. Guidelines:

Do not remove the RF Exposure Label from the device. User awareness instructions should accompany device when Do not use this device if the operational requirements described transferred to other users. herein are not met. Operating Instructions:

Transmit no more than the rated duty factor of 100% of the time. To transmit (talk), push the Push-To-Talk (PTT) button. To receive calls, release the PTT button. Transmitting 100% of the time, or less, is important because this radio generates measurable RF energy exposure only when transmitting (in terms of measuring for standards compliance).

P/N MAN-0696/01.01 Menu structure E2EE Status

(enable/disable E2EE) Menu Messages Change Mode

(TMO/DMO/FM) Encryption

(only TETRA) Phone Lists Settings Monitor only FM)

(to check radio coverage, Information GPS Help Group Mng (only TETRA)

(group management) Calls (only TETRA) Delivery Options (only TETRA)

(to select the kind of mes-

sages delivery report) Tx Inhibit (only TETRA)

(to disable/enable the transmission) Group (only FM)

(to select the active group/

channel) Dead Man

(to enable/disable the relative functionality) Preferences Bluetooth Accessories Activation/Deactivation Devices Active Connection Offered Services Find New Devices List Key Access

(direct access keys are shown) Dialling (only TETRA)

(dialling digits are shown) Supplementary String (only TETRA)

(supplementary strings are shown) Symbols

(symbols meaning is shown) Late Entry

(to enable/disable the function) Communication

(with/without ACK, DMO only) Send TPNI

(enable/disable, DMO only) Group Call

(to select the type of group call, TMO only) Dial Mode

(to select the dialling modality) Call Identification

(to choose if send or hide its own radio identifier, TMO only) Gateway

(to select the default gateway from the gateway list, TMO only) In Box Out Box Text Message Send Status Char Size Phone Book (only TETRA)

(user defined) Home TETRA (only TETRA)

(pre-configured phone book) Non TETRA (only TETRA)

(pre-configured phone book, TMO only) Group Scanning

(to enable/disable it) WPS Selection WPS Update WPS Reconfigure Active WPS

(to change the configura-

tion of the active WPS) Extra WPS

(to move the groups assigned by DGNA in the current WPS) WPS Data

(to modify the current WPS parameters) Group Data

(to modify the groups parameters) PIN

(to change/enable/disable it) Talk (only TETRA)

(to select the default conversa-

tion mode loudspeaker/ear-

phone for direct incoming calls) Language Sounds

(to disable and to control the sounds volume) Display Backlight

(to change the display backlight modality) LCD Contrast

(to change the display contrast) Wallpaper

(to change the display background image) Colour

(to change by means of various sub-menus the colour of the background and of the text of various display contexts) Black & White

(to set the display in black and white mode) Zoom

(to zoom in/zoom out the display) Screensaver

(to change the display screensaver) Logo

(to change the welcome display image)

NOTE:

Some menus can be or not available according to the configuration Choosing some options of WPS menus can cause the ending of of the radio terminal. active group calls. P/N MAN-0696/01.01 P/N MAN-0696/01.01 P/N MAN-0696/01.01 Displayed symbols Signal level (TMO channel) Network (search if flashing) Direct Mode Direct Mode with DM-GATEWAY equipment presence detected Direct Mode with DM-REP equipment presence detected E2E Crypto enabled Presence of not read messages in the In-Box. If the symbol is blinking the queue is full, and there is at least one message not read Full Queue, each message is read Active Data Call Fallback mode Earphone speech Call Speech connection active, loudspeaker mode Keypad Volume OFF Keypad locked Group Scanning enabled Group Attach Failure Group selector enabled, displayed alternatively to Battery level indication Packet Data Context Packet Data Channel Headset detected Bluetooth activated (*) Handset detected GPS External Device detected Car kit detected UHF Simplex channel UHF Network channel Custom E2EE enabled Custom E2EE error VOX enabled Transmission active D P F G P S U H F V O X Main controls and indicators Group -

channel Selector /

Volume Controller During normal operation the knob has the volume control function, turn it clockwise to turn up the volume of the audio output of the loudspeaker/earphone. Turn the knob counterclockwise to decrease the volume. If the knob is kept pressed until the alternate symbols and appear on the display it goes to group-channel selection function. Once in this modality turn the knob to choose among the available groups and select the group-channel by pressing the knob. Once pressed the knob you go back to volume control function. If, in group-channel selection modality, no operation on the knob is performed for a pre-defined time interval, the knob automatically changeovers to volume control function. Emergency key Keep pressed the emergency key for at least 2 seconds to send an emergency alarm, when the radio is on. When the radio is off pressing the emergency key will turn on the radio. Right navigation key: it's usually related to the BACK/CLEAR option. When the radio is in idle status it allows the access to send status menu; during calls using this key it is possible to send DTMF tones (only TETRA). Up/down navigation key. In idle status allows to access the phone lists menu. It changes conversation mode (from loudspeaker to earphone and vice versa) during calls. Left navigation key, for menu options selection. In idle status and during calls it allows the access to the main menu. Keep pressed for a few seconds to switch on/off the radio. If pressed during communication it interrrupts the connection. Loudspeaker Speaker used for Loudspeaker conversation mode. PTT PTT(1) Off hook key, to accept/make (after having typed in the address) an individual full duplex call; if pressed in idle status it allows to access the list of the last calls (made/received). Push-To-Talk button, press it to talk during half-duplex conversation. If pressed (in idle status when a group is selected, or after having typed in a group address) it sends a call to the selected group/channel. If the network allows this function, pressing PTT(1) in idle status when a group is selected the first available dispatcher of the selected group is called (not the group). Otherwise, after having typed in the address, press PTT(1) to make the half duplex individual call. Red Led It is lit while the radio is transmitting; blinking in Tx Inhibit mode (only TETRA). Green Led It is lit while the radio is receiving. Small speaker used for earphone conversation mode. Earphone

NOTE:

For what concerns technical characteristics, reference standard, maintenance and troubleshooting, refer to the relevant technical handbook. SELEX Communications S.p.A. A Finmeccanica Company Via Pieragostini, 80, 16151 - Genova, Italy

& FM PUMA T3 PLUS PUMA T3 PLUS Handportable radio Quick reference guide Before using the equipment, read all the instructions contained in the present guide and, with special care, those relative to safety. WARNING See the Safety Recommendations guide for FCC Approval 2010 SELEX Communications S.p.A. - All rights reserved. SELEX Communications S.p.A. reserves the right to change specifications, performance or features relevant to the product described without notice. This is an unpublished work the copyright in which vests in SELEX Communications S.p.A. The information contained herein is confidential and the property of SELEX Communications S.p.A. and is supplied without liability for errors or omissions. No part may be reproduced, disclosed or used except as authorised by contract or other written permission. P/N MAN-0696/01.01 P/N MAN-0696/01.01 P/N MAN-0696/01.01 P/N MAN-0696/01.01 How to... O M T O M D M F Switch on/

switch off the handportable for a few seconds. Keep pressed the key The radio can also be turned on by keeping pressed the emergency key for a few sec-

onds.

Manage the PIN

(Personal Identification Number)

PIN insertion at power on, can be:

Enable/disabled from menu Always enabled Always disabled If PIN insertion is enabled, at power on the user must insert the current PIN. In case of insertion of 3 consecutive wrong pin, the current PUK must be inserted to un-

lock the radio. In case of 3 consecutive wrong PUK insertion the radio must be reprogrammed to be un-

locked. Hold your Puma T3 PLUS When you are speaking in Earphone mode, hold your radio like a normal telephone.

In Loudspeaker mode (or in FM mode without the use of earphone accesso-

ries) hold Puma T3 PLUS in vertical position with its microphone, which is located towards the bottom of the ra-

dio, in front of your mouth. During conversation, press the key Otherwise select Settings Preferences Talk from main menu.

To adjust the speech volume, use the volume knob; turn it clockwise to increase the volume and counterclockwise to decrease it. To ad-

just the volume of the various sounds access from main menu to Settings Preferences Sounds.

Change con-

versation mode Ear-

phone/Loud-

speaker Adjust the Volume Lock/unlock keypad to lock the Press the keys keypad; to unlock it press any key and follow the instructions shown on the display. and then

Change modality TMO/DMO/

FM (*) Change Working Profile Sub-

set (WPS) for a few seconds. Oth-

Keep pressed key 0 erwise select Change mode from main menu and select the modality.

Each WPS is composed of a set of different groups related to the group selector knob po-

sitions. Changing WPS you change the groups that can be selected by means of the knob. To change WPS, keep pressed key 2 ABC for a few seconds. Otherwise select Settings Group MNG WPS Select.

Call a group Select the group by means of the relevant knob, then press PTT to talk; otherwise type in the group address and press PTT.

How to... Call the dis-

patcher of the selected group (if the network allows this function) Call the OPEN GROUP Make an individual full duplex speech call Make an individual half duplex speech call Make a call in FM mode

(*) Send an emergency alarm Send a status message Send a text message Send DTMF tones O M T O M D M F Select the group by means of the relevant knob and press PTT(1) to call the first avail-

able dispatcher of the selected group (not the group). Keep pressed key 9 WX then press PTT to talk. YZ for a few seconds, Type in the address or select a subscriber selecting Phone Lists Phone Book then press key

Type in the address or select a subscriber selecting Phone Lists Phone Book then press PTT(1).

To make a call in FM mode (whether to a user or to a group) dial the user or the group ad-

dress to be called, or select the address from the Phone Lists and press the key

. Press PTT to talk. Keep pressed the emergency key at least for 2 seconds. In TETRA mode the radio can be programmed to:

Send a call request Sen an SDS Send a call request and an SDS at the emergency key pressing. In FM mode, if the channel selected is UHF

(simplex or network) the radio sends an alarm until another radio gives the received alarm signal through the key

. Access the send status menu, pressing the key or selecting from main menu:

Messages Send Status. Select the status to be sent, then select an and send it by means user or selecting the Send option. of the key or a group or a group Access the text messages selecting from main menu Messages Text Messages; other-

wise keep pressed key 4 GHI for a few seconds. Create a new message or select a predefined message then select Option Send. Select and send the an user or selecting message by means of key the option Send. During the editing of a mes-

sage it is possible to change from Uppercase to Lowercase pressing the key During a half duplex call, access the DTMF from the main menu by pressing the key screen keep pressing the PTT and send DTMF tones by means of the relative keys (each alphanumeric key is a different tone).

How to... Read a received message

(Inbox) Access last calls list Go back in a group call Enable/

disable encryption Activate Bluetooth

(*) Connect and use Bluetooth accessories

(*) O M T O M D M F

Access the received messages list from main menu selecting Messages Inbox. Use the key to scroll the list of messages. The re-

ceived messages can be status messages. Select the message to be read and then Option to choose among Delete-

Replay-Replay+History. or text From idle status press key to display the list of the last 20 calls. Scroll them by means of key

. In TETRA mode it is possible to recall the subscriber by means of PTT (1) (Half-

(Full-Duplex, TMO only). In Duplex) or key FM mode it is possible to recall the subscriber or the group, by means of the key

. It is possible to go back in a group call which is still active and from which you have discon-

nected: in TMO by pressing the PTT and in DMO by keeping pressed the key T UV . To enable/disable encryption End To End encryption select Encryption E2EE sta-

tus. Once encryption is enabled the symbol appears on the radio display and it is pos-

sible to choose the key used for the encryption selecting the item E2EE key. Activate Bluetooth functionality selecting Set-

tings Bluetooth Activation. Once appears on Bluetooth is active the symbol the radio display. Note: If the radio is turned off with the Bluetooth active, at the succes-

sive switch on the Bluetooth is deactivated. With Bluetooth functionality active select the menu item Find New from Settings Bluetooth Devices (Bluetooth device must be in inquiring status). Once the device has been found check if it is "Trusted" or

"Untrusted" through the menu item Devices List from menu Settings Bluetooth De-

vices, showing the device information. If the device is "Untrusted" select Option from the display showing the device information, and then select Services Search. Once the device is "Trusted" select Option from the display showing the device informa-

tion, and then select Services List. Choose the service scrolling the list through

, select Option and then Open, to the key open the service. If the accessory connected is a Bluetooth headset, once the service has will be shown on been opened the symbol the radio display. To pass the audio signal to the headset press the button located on the headset itself. Pressing the headset button again the audio signal returns to the radio. How to... Remove Bluetooth accessories

(*) O M T O M D M F

To remove a Bluetooth accessory it is first necessary to disconnect it closing and remov-

ing the relative service:

select Settings Bluetooth Devices Devices List;

scroll the device list till the device to be re-

moved and select Option;

select the item Services List and scroll the Service List till the service to be close;

select Option and then Close. Then, from the same menu select Remove to remove the service. Now it is possible to remove the accessory:

select Settings Bluetooth Devices Devices List;

scroll the device list till the device to be re-

moved and select Option;

select the item Remove Device;

press the key associated with "YES" to confirm the operation. Deactivate Bluetooth (*) Visualize GPS data Check the radio coverage of other users

To deactivate Bluetooth it is first necessary to remove all the Bluetooth accessories, then select Settings Bluetooth Deactiva-

tion. Select GPS item from main menu to visualize:

date, time, latitude, longitude, satellite number. Access the monitor menu keeping pressed for a few seconds from idle sta-

the key tus, otherwise select Monitor item from main menu. Selecting Option it is possible to choose among:

Add (to add an user to be monitored) Delete (to remove an user to be monitored) View (to visualize the details of the last three radio coverage checks of the specific user). The first time that you access this menu it is required to enter the first address to be moni-

tored.

NOTE:

From the idle status keep the key pressed for about two seconds to quickly access the relevant functions.

NOTE:

Through the sub-menus of item Settings it is possible to configure several options of the hand-held radio terminal. For example, in TETRA mode, it is possible to inhibit the trans-

mission (Tx Inhibit) or to select the default gateway and the digit ("0" "9") that must be dialled to access that gateway (Gateway<0>, Gateway<9>). It is also possible to configure the accessories connected and to enable/disable the dead man functionality. Through the Preferences sub-menu the user can personalize the termi-

nal, setting: language, sounds volume, display options. Selecting Help from main menu it is possible to visualize: the direct access keys function (direct access keys are available even during calls), the description of the strings to be dialled to define the call priority, the gateways and the address composition method (for TETRA). Also the meaning of the symbols that can be visualized on the radio display is shown.

(*) Function not available for U.S. market