FCC ID: G7H-SPRW002 Parafait Reader 4

Turnstile Mount Reader (XCESS) Installation & Configuration Version 1.2, May 2022 Turnstile Mount Reader (XCESS) Installation & Configuration The information presented is subject to change without notice. Semnox Solutions assumes no responsibility for inaccuracies contained herein. Legal Notice Copyright 2017 Semnox Solutions Pvt Ltd. All rights reserved. Notice No part of this document may be reproduced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of Semnox Solutions. Every effort has been made to ensure that the information contained in this user manual was accurate at the time of printing. However, information is subject to change. 1 Turnstile Mount Reader (XCESS) Installation & Configuration Table of Contents ABOUT THIS DOCUMENT ......................................................................................................................... 3 INTRODUCTION ........................................................................................................................................ 4 OPERATIONAL DESCRIPTION .................................................................................................................... 4 PRODUCT SPECS ....................................................................................................................................... 4 KEY FEATURES .......................................................................................................................................... 4 XCESS READER ......................................................................................................................................... 5 LAN INTERFACE BOARD CONNECTIONS ................................................................................................. 6 LAN INTERFACE BOARD CONFIGURATION ............................................................................................. 7 WIZNET TOOL CONFIGURATION STEPS .............................................................................................................. 7 MANAGEMENT STUDIO SETTINGS ......................................................................................................... 11 READER SETTINGS IN SERVER ................................................................................................................. 12 FCC Interference Statement13 2 Turnstile Mount Reader (XCESS) Installation & Configuration About this document Purpose This document explains the installation and configuration of the Turnstile Mount Reader (XCESS). Product name: PARAFAIT READER 4 Model number: PARARDR005, PARARDR005-1, PARARDR005-2 FCC ID: G7H-SPRW002 Revision History

2018 Nov. - First issue of the document. 20210908 - Model numbers PARARDR005-1 and PARARDR005-2 added 20210908 FCC ID, Operational Description, Product Specs added feedback 20220525 FCC Statement added To send us your feedback on the document, email your comments to info@semnox.com Document Conventions The following document conventions are used throughout this document:

Title Note Description Indicates neutral or positive information that emphasizes or supplements important points of the main text. In addition, a note supplies information that may apply only in special cases. Bold text Bold text indicates menu names, buttons, and field names. Hyperlinks All links to different topics, sites and external documents. Related Documentation For information related to Management Studio configuration, refer the PARAFAIT MANAGEMENT STUDIO USER MANUAL. Icon Note Bold Link Technical Support We are here to help!

Semnox Solutions Headquarters Punja Building Annexe MG Road, Lalbagh, Mangalore, Karnataka 575003 India Phone: +91 824-4255888 Customer Support Email: support@semnox.com Phone: +91 9008005544, +91 9482128588 www.semnox.com 3 Turnstile Mount Reader (XCESS) Installation & Configuration Introduction Semnox has a powerful and robust access control system suitable for controlling entries into theme parks, theater entrances, gaming zones etc. Flap barriers, Tripod Turnstiles, Bridge Turnstiles etc. are used at the entrances. The turnstiles are integrated with RFID-based entry devices, or barcode scanners for cashless transactions. They provide access to only valid ticket holders. Semnox has launched a new version of reader, "XCESS" exclusive for turnstile mounting. Operational Description The LAN Reader XCESS is a powerful and robust access control system suitable for controlling entries into theme parks, theater entrances, gaming zones etc. When a customer card is tapped at the XCESS reader, the reader communicates with the server over a Wi-Fi network or LAN connection. On acknowledgment from server, the reader will create necessary pulses to activate the turnstile. The readers support Mifare and Hitag cards, BLE tags and wristbands. Product Specs Key Features 3.5-inch TFT LCD display LED Bezel with software-controlled patterns. support Customizable display with multi-lingual Wi-Fi enabled, per latest Wi-Fi standards FCC, CE certified Bluetooth Low Energy. 5 GHz and 2.4 GHz Wi-Fi in some models. PoE(802.3af) and LAN connection. 4 Turnstile Mount Reader (XCESS) Installation & Configuration XCESS Reader The following images show the XCESS Reader. In theme parks, different variants of the XCESS Reader maybe used based on the requirement. Depending on the usage there are 3 variants:

RFID controlled gates Barcode controlled gates Biometric plus RFID controlled gates The usage type is decided in the reader configuration. The config values are explained in the following section. 5 Turnstile Mount Reader (XCESS) Installation & Configuration LAN Interface Board Connections If External LAN =1, the reader works in LAN Mode. LAN mode requires a hardwired cable. For LAN mode, Baudconfig value =0 and BaudChngRetry value=5. If External LAN = 0 then the reader works in WiFi mode. For WiFi mode we need to setup SSID and password. For WiFi mode, Baudconfig value =1. If External Card Reader value is 0 then it supports RFID. If External Card Reader value is 1 then it supports Barcode scanning. 6 Turnstile Mount Reader (XCESS) Installation & Configuration LAN Interface Board Configuration LAN interface board is configured using the tool called Wiz105SR configuration tool. This tool is usually provided and installed by Semnox. It can also be downloaded from the link:

http://www.wiznet.co.kr/Sub_Modules/en/product/product_detail.asp?Refid=710&page=1&cate1=

&cate2=&cate3=&pid=1023&cType=2 Follow the instructions to install WIZ100/105/110SR Config Tool . Launch the Wiznet tool after installation is successful. Wiznet Tool Configuration Steps Step 1: Launch the Wiznet tool. Click Search at the bottom of the screen. MAC of the LAN interface boards that are connected in the network are fetched and displayed. Search button Step 2: Select the MAC to configure. 7 Turnstile Mount Reader (XCESS) Installation & Configuration MAC of the LAN devices that are connected to the network is displayed. Select the MAC to configure Step 3: Network Configuration

Set IP configuration to Static. It is recommended to use the module in static IP mode. Set IP, Gateway, Subnet. While assigning static IP, take all necessary precautions that the same IP is not assigned to any other device in the same network. Click Setting to save the parameters. 1. IP method = Static 8 Turnstile Mount Reader (XCESS) Installation & Configuration 2. Assign IP Address 3. Click on Settings to save Step 4: Click on the tab Serial. Verify if the values as shown in below reference image. 9 Turnstile Mount Reader (XCESS) Installation & Configuration Step 5: Click on the tab, Option.

Set Inactivity Time = 10 seconds Time = 200 ms Size = 32 Bytes Char = 0 Click on Setting to save the changes. Inactivity Timer =

10 Time = 200 10 Turnstile Mount Reader (XCESS) Installation & Configuration Management Studio Settings MAC of the LAN interface board needs to be setup in Management Studio. This is setup in Parafait Management Studio > Games > Machines. 1. Enter the MAC of the LAN interface board against the machine name 2. TCP Port

= 5000 3. Enter respective IP assigned to the lan board 11 Turnstile Mount Reader (XCESS) Installation & Configuration Reader Settings in Server After installing the readers, all the readers should be entered in server. Each reader has a unique number called MAC Address. A sticker with MAC address is stuck on each reader. Make a note of MAC address of all the reads with name of games. Follow this procedure to enter the MAC address of the reader in server. Log into Parafait Management Studio Open Games Menu Open Machines screen The following screen is displayed. After entering the MAC Addresses, save and close the Machines screen. MAC Address 12 Turnstile Mount Reader (XCESS) Installation & Configuration FCC Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement:

The product complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such a function is available. 13

MAC xx:xx:xx:xx:xx:xx S/N:

7-yy-ww-xxxxx SEMNOX Model Name: PARARDR005 FCC ID: G7H-SPRW002 Also contains:

FCC ID: G7H-SPRFTR002 and FCC ID: 2AL3B-ESPF1 or 2ADXS-WFM60-SFP2501 PoE (802.3AF): 37-57 V, 350 mA Input: 12V DC, 2 A MADE IN CHINA SEMNOX

I IIIIDJlllllllllllll

FCC, Request for non-disclosure Date: 21-Nov-2018 RF_501, Issue 8 Page 1 of 1 Company Name: Semnox Solutions Private Limited Address: No.4-1-145, 3rd Floor, Punja Building Annexe, MG Road, Lalbagh, City: Mangalore Country: India To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: G7H-SPRWO002 Reference number: ##4HHt Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:

CO] Bill(s) of Material X] Block Diagrams Operational Description [x] Schematic Diagrams ( Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below):

CJ Internal Photos [] User's Manual OO Test Set-up Photos CJ External Photos Justification:

Date: 2022/05/20 Name and signature of applicant: Kiran Karanki \ ) Notes: \9 1) A document or type of document can only have ONE type of confidentiality!

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!

The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Semnox Solutions Private Limited 3rd Floor, Punja Building Ai semnex MG Road, Lalbagh, Mangalara Karnataka 575003 PLAY YOUR WAY Phone : +91 824 4255888 semnox.com Email : Info@semnox.com CIN : U72200KA2008PTC045354 Declaration of Authorization We Name: Semnox Solutions Private Limited Address: No.4-1-145, 3rd Floor, Punja Building Annexe, M G Road, Lalbagh, City: Mangalore Country: India Declare that:

Name Representative of agent: Joan Wu Agent Company name: Universal Certification Technology Co., Ltd. Address: 4F., No. 5, Alley 69, Lane 132, Rueiguang Rd., Neihu District, City: Taipei Country Taiwan is authorized to apply for Certification of the following product(s):

Product description: Parafait Reader 4 Type designation: PARARDROOS Trademark: Parafait Validity/ expiry date 2023/05/19 on our behalf. Date: 2022/05/20 City: Mangalore Name: Kiran Karanki (2) Function: Director Signature: a te fogs re clea icpnionics Notes:

(1): Required for FCC application

(2): For FCC it must be the Grantee Code owner or the authorized agent.