all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 320.90 KiB | ||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | User Manual | Users Manual | 320.90 KiB |
| Sno owtalk S Snow Spo k Snowtalk S orts Blue etooth He eadset &
& Interco m A SENA www w.sena.co om Users G Guide 1
| Snowtalk 1998-2012 Sena Technologies, Inc. All rights reserved. Sena Technologies, Inc reserves the right to make any changes and improvements to its product without providing prior notice. Sena is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. SMH10, SMH5, SMH5-FM, SPH10, SPH10H, SPH10H-FM, SMH10R, SPH10S, SPH10H, SR10, SM10 are trademarks of Sena Technologies, Inc. or its subsidiaries. These trademarks may not be used without the express permission of Sena. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. iPhone, iPod touch are registered trademarks of Apple Inc. Zumo is a trademark of Garmin Ltd. or its subsidiaries. TomTom is the trademark or registered trademark owned by TomTom International B.V. Other trademarks and tradenames are those of their respective owners. 2
| Snowtalk CONTENTS 1. INTRODUCTION 2. PACKAGE CONTENTS 3. INSTALLING THE SNOWTALK ON YOUR HELMET 4. BASIC FUNCTIONS 4.1 Powering On/Off 4.2 Charging 4.3 Checking the Battery Level 4.4 Volume Adjustment 4.5 Function Priority 5. PAIRING THE SNOWTALK WITH BLUETOOTH DEVICES 5.1 Mobile Phone Pairing 5.2 Second Mobile Phone Pairing 5.3 Bluetooth Stereo Device Pairing 5.4 Intercom Pairing with other Snowtalk headsets 6. MOBILE PHONE CALL MAKING AND ANSWERING 7. STEREO MUSIC 7.1 By Stereo Audio Cable 7.2 By Bluetooth Wireless Stereo 8. TWO-WAY INTERCOM 8.1 Start Two-way Intercom 8.2 End Two-way Intercom 8.3 Intercom Reconnection 9. THREE-WAY CONFERENCE INTERCOM 9.1 Start Three-way Intercom 9.2 End Three-way Intercom 10. FOUR-WAY CONFERENCE INTERCOM 10.1 Start Four-way Intercom 10.2 End Four-way Intercom 11. INTERCOM AND MOBILE PHONE CALL 12. SNOWTALK CONFIGURATION SETTING 12.1 Enabling/Disabling Voice Prompt 12.2 Enabling/Disabling Sidetone 12.3 Enabling/Disabling Advanced Noise Control 12.4 Delete All Bluetooth Pairing Information 12.5 Reset to Factory Default Setting 12.6 Exit Voice Configuration Menu 13. FAULT RESET 14. FIRMWARE UPGRADE 3
| Snowtalk 15. OPERATION QUICK REFERENCE CERTIFICATION AND SAFETY APPROVALS FCC Compliance Statement FCC RF Exposure Statement FCC Caution CE Declaration of Conformity Industry Canada Statement Bluetooth License WEEE (Waste Electrical and Electronic Equipment ) SAFETY INFORMATION Product Storage and Management Product Use Battery PRODUCT WARRANTY AND DISCLAIMER Limited Warranty Warranty Exclusions Reasons for Limited Liabilities Limitation of Liability Liabilities Disclaimer Warranty Service Free-of-charge Service Charged Service Return for Full Refund 4
| Snowtalk 1. INTRODUCTION Thank you for choosing the Sena Snowtalk, Snow Sports Bluetooth Communication System. With the Snowtalk, you can call handsfree on your Bluetooth mobile phone, listen to stereo music and have intercom conversations in full duplex with other Snowtalk users. The Snowtalk is compliant with the Bluetooth 3.0 supporting the following profiles: Headset Profile, Hands-Free Profile
(HFP), Advanced Audio Distribution Profile (A2DP), and Audio Video Remote Control Profile (AVRCP). Please check with the manufacturers of other devices to determine their compatibility with this headset. Please read this users guide carefully before using the headset. Also check www.sena.com for the latest version of the users guide and additional information related to Sena Bluetooth products. The Snowtalk features:
Bluetooth handsfree for Bluetooth mobile phones Bluetooth pairing for dual mobile phones Bluetooth stereo headset for Bluetooth audio devices such as MP3 players Bluetooth intercom up to 700 meters (760 yards)*
Four-way intercom Three-way conference phone call with intercom participant Stereo music by 3.5mm audio cable Advanced Noise Control Easy installation in ear pockets Easy operation by two big buttons Optional attachable external microphone Firmware upgradeable
* in open terrain Key Specifications:
Bluetooth 3.0 Supporting profiles: Headset Profile, Hands-Free Profile (HFP), Advanced Audio Distribution Profile (A2DP), Audio Video Remote Control Profile (AVRCP) 5
| Snoowtalk 2. P Snow GE CONT PACKAG wtalk Headse et TENTS Right t Button Enter into Start and Play and p Track-forw Enter into Navigate t Left B Button Enter into Enter into Answer an Last numb Adjust vol Track-bac intercom pa end intercom pause Blueto ward (Stereo voice config through conf airing m conversatio ooth stereo d o Music) guration setti figuration me ng enu on device ne pairing mo tereo device obile phone c call ode pairing mod de mobile phon Bluetooth st nd end a mo ber redial ume level ck (Stereo Mu usic) Power & Da ata Cable USB P m Stereo Au udio Jack Ca able 3.5mm 6 Exter nal Microphhone
| Snoowtalk 7
| Snowtalk 3. INSTALLING THE SNOWTALK ON YOUR HELMET 1. Place the left and right speakers in the ear pockets of your helmet. Make sure the speakers are facing towards your ears. 2. Hide the wires in the back of the helmet. 3. If you want to deliver your voice more clearly, you can install the external microphone on your helmet. Plug in the microphone to the right speaker. 4. Wrap the microphones velcro around the chin strap with the microphone facing downwards. 4. BASIC FUNCTIONS 4.1 Powering On/Off To power on the Snowtalk, press the (L) Button and the (R) Button simultaneously for one second to power on. You will hear ascending beeps and Hello. To power off, press the (L) Button and the (R) Button at the same time. You will hear descending beeps and Goodbye. 4.2 Charging When the battery is low, you will hear mid-tone triple beeps and a voice prompt, Low Battery. You can charge the Snowtalk by connecting the supplied USB power & data cable into a computer USB port or USB wall charger. You can use any standard micro-USB cable to charge the Snowtalk. The charging LED is red while charging, and turns to blue when the headset is fully charged. It takes about 2.5 hours to be completely charged. Note:
1. The USB Power & Data Cable is also used for firmware upgrade of the Snowtalk. 2. The USB wall charger is not included in the package. Any 3rd party USB charger can be used with Sena products if the charger is approved by either FCC, CE, IC, or other locally approved agencies that Sena accepts. Please contact Sena regarding locally approved agencies Sena accepts. 4.3 Checking the Battery Level When the headset is powering on, the red LED flashes rapidly indicating the battery level. 4 flashes = High, 70~100%
3 flashes = Medium, 30~70%
2 flashes = Low, 0~30%
4.4 Volume Adjustment 8
| Snowtalk You can adjust the speaker volume using the (R) Button. To increase volume, press the (R) Button once. To decrease volume, quickly press the (R) Button twice. You will hear a beep when the volume reaches maximum or minimum level. Each audio sources volume is set and maintained independently at different levels even after you turn off the headset. For example, once you set the volume for mobile phone handsfree, it will not change even if you adjust the volume for Bluetooth MP3 music. So you can always maintain the preferred optimum volume level for each audio source. 4.5 Function Priority The Snowtalk operates in the following order of priority:
(Highest) Mobile Phone Intercom
(Lowest) Bluetooth Stereo Music A lower priority function is always interrupted by a higher priority function. For example, stereo music is interrupted by an intercom call, and intercom conversation is interrupted by incoming mobile phone call. 5. PAIRING THE SNOWTALK WITH BLUETOOTH DEVICES Before using the headset with any of Bluetooth devices for the first time, you need to pair them together. The Snowtalk can pair with Bluetooth mobile phones, Bluetooth stereo devices such as MP3, and with other Sena Bluetooth headsets. This pairing operation is required only once for each Bluetooth device. The headset will remain paired with the devices and automatically reconnect to them when they are within range. You will hear a high tone single beep and a voice prompt when the headset reconnects to the paired device: Phone connected to a mobile phone, Media connected to a Bluetooth stereo device. 5.1 Mobile Phone Pairing 1. Turn on the headset and press the (R) Button for 5 seconds until you hear multiple beeps. You will hear a voice prompt saying Phone pairing. 2. Search for Bluetooth devices on your mobile phone. Select the headset in the list of the devices detected on the mobile phone. 3. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN. 4. The mobile phone confirms that pairing has been completed and the headset is ready to use. You will hear a voice prompt from the headset saying Your headset is paired. If the pairing process is not completed within three minutes, the headset will return to stand-by mode. 5. 5.2 Multipoint Pairing Typical Bluetooth headsets can connect with only one HFP (Hands-Free Profile) device, but multipoint pairing allows the 9 headset to connect with two HFP devices at the same time.
| Snowtalk 1. To pair another mobile phone, press the (R) Button for 5 seconds until you hear multiple beeps and hear a voice prompt saying Phone pairing. 2. Within 2 seconds, tap the (R) Button. You will hear a voice prompt saying Multipoint pairing. 3. Search for Bluetooth devices on your mobile phone. Select the headset in the list of the devices detected on the mobile phone. 4. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN. 5. The mobile phone confirms that pairing has been completed and the headset is ready to use. You will hear a voice prompt from the headset saying Your headset is paired. 5.3 Bluetooth Stereo Device Pairing 1. 2. If the Bluetooth stereo device is integrated with the mobile phone such as smartphones, you dont need to pair the headset with it separately. When the headset is paired with the mobile phone, it is also paired as a stereo music device. If you have a stand alone Bluetooth stereo device, follow the pairing procedure in 6.1 Mobile Phone Pairing. Note:
1. 2. If Bluetooth connection between the headset and a mobile phone is disconnected, tap the (R) Button for one second to recover the Bluetooth connection immediately. If Bluetooth connection between the headset and a media player is disconnected, press the (L) Button for one second to recover the Bluetooth connection and play. 5.4 Intercom Pairing with other Snowtalk headsets The Snowtalk can be paired with up to three other headsets for Bluetooth intercom conversation. 1. Turn on the two Snowtalk headsets (A and B) that you would like to pair with each other. 2. Press and hold the (L) Button of the headset A and B for 5 seconds. You will hear a voice prompt saying Intercom pairing. 3. Simply tap the (L) Button of any one of the two headsets A or B (It doesnt matter that you choose A or B.) and wait until the intercom connection is established. The two headsets A and B will be paired with each other for intercom conversation. If the pairing process is not completed within one minute, the Snowtalk will return to stand-by mode. 4. You can make other pairings between the headset A and C, and between the headset A and D by following the same procedure as above. 5. The intercom pairing queue is Last-Come, First-Served. If a headset has multiple paired headsets for intercom conversations, the last paired headset is set as first intercom friend. The previous intercom friend becomes second intercom friend, and third intercom friend. For example, after the pairing procedures listed above, headset D is the first intercom friend of headset A. Headset C is the second intercom friend of headset A, and headset B is the third intercom friend of headset A. 10
| Snowtalk Note:
1. The Snowtalk can be paired with all other Sena headset models such as the SMH10 and the EXPAND for intercom conversation. Please follow the same procedure as above to pair with these headset models. 2. The SMH5 cannot participate in three-way or four-way conference intercom with the Snowtalk. The SMH5 has a limited capability of having two-way intercom. 6. MOBILE PHONE CALL MAKING AND ANSWERING 1. When you have an incoming call, simply tap the (R) Button to answer. 2. To end a call, press and hold the (R) Button for 1 second until you hear a beep, or wait for the caller to end the call. 3. To reject a call, press the (R) Button for 1 second until you hear a beep while the phone is ringing. 4. There are several ways to make a phone call:
- Enter numbers on your mobile phone keypad and make a call. Then the call is automatically transferred to the headset.
- Press and hold the (R) Button for 1 second in stand-by mode to activate the voice dialer of your mobile phone. For this, the voice dialing feature must be available on the mobile phone. Refer to your mobile phone manual for further instruction.
- To redial the last number, press and hold the (R) Button for 3 seconds in stand-by mode until you hear a high-tone single beep. You will hear a voice prompt saying Last number redial. Tap the (R) Button Press and hold the (R) Button for 1 second while calling Press and hold the (R) Button for 1 second while ringing Use phone keypad Answer End Reject Call Press and hold the (R) Button for 3 seconds Last number redial Press and hold the (R) Button for 1 second Voice Dial Mobile Phone Call Button Operations 7. STEREO MUSIC You can listen to stereo music in two ways: with the enclosed stereo audio cable or by Bluetooth wireless stereo. 7.1 By Stereo Audio Cable Plug your stereo MP3 player directly to the Snowtalk by using the enclosed 3.5mm stereo audio jack cable. To adjust the volume, tap the (R) Button once to increase volume, and twice to decrease volume. You may adjust the volume on the 11
| Snowtalk By Stereo Wireless Bluetooth MP3 player also. 7.2 The Bluetooth audio device must be paired with the Snowtalk by following the Bluetooth Stereo Device Pairing procedures described in section 6.1. The Snowtalk supports the Audio/Video Remote Control Profile (AVRCP), so if your Bluetooth audio device also supports the AVRCP, you can use the Snowtalk to remotely control music playback. You can not only adjust the volume but also use the functions such as play, pause, next track and previous track. 1. To increase volume tap the (R) Button once. To decrease volume, tap the (R) Button twice. 2. To play or pause music, press and hold the (L) Button for 1 second until you hear a double beep. 3. To track forward, press and hold the (R) Button for 2 seconds. To track backward, press and hold the (L) Button for 2 seconds. Note:
Bluetooth music is available only when the MP3 jack port remains open. Please make sure the audio cable is unplugged from the clamp unit to play music by Bluetooth. 7.3 You can start sharing music with an intercom friend using Bluetooth stereo music during a two-way intercom conversation. 1. To start or terminate sharing music, press and hold the (L) Button during an intercom conversation. You will hear triple beeps and a voice prompt saying Music sharing. 2. You and your intercom friend will listen to or terminate shared music. 3. To track forward, press and hold the (R) Button for 2 seconds. To track backwards, press and hold the (L) Button for 2 seconds. Note:
1. Both you and your intercom friend can remotely control music playback during music sharing such as track forward and track back. 2. When you are making or receiving a phone call during music sharing, the function will be paused. 8. TWO-WAY INTERCOM 8.1 Start Two-way Intercom You can start an intercom conversation with one of any intercom friends by tapping the (L) Button: single tap to intercom with the first intercom friend, double tap for the second intercom friend, and triple tap for the third intercom friend. Sharing Music 8.2 End Two-way Intercom 12 To terminate an intercom conversation, single tap the (L) Button. Any intercom connection with any intercom friend will be terminated by a single tap. Double or triple tap will do nothing in this case.
| Snowtalk 3rd intercom friend 2nd intercom friend 1st intercom friend Triple tap Single tap Double tap Single tap Single tap Single tap Start intercom End intercom Start & End Two-way Intercom 8.3 Intercom Reconnection If your intercom friend goes out of range while having an intercom conversation, the intercom becomes disconnected after some static noise. In this case, the Snowtalk automatically tries to reestablish the connection every 15 seconds with high-
tone double beeps. If you do not wish to reconnect, tap the (L) Button to stop the attempt. 9. THREE-WAY CONFERENCE INTERCOM 9.1 Start Three-way Intercom You (A) can have a three-way conference intercom with two other Snowtalk friends (B & C) by establishing two intercom connections at the same time. While a three-way conference intercom is in progress, mobile phone connection of all three participants would be temporarily disconnected, but as soon as the conference intercom terminates or one of the participants leaves the intercom, all mobile phones would be automatically reconnected. During the conference intercom, if you have an incoming mobile phone call, terminate the conference intercom to automatically reconnect the mobile phone and receive the call. 1. You (A) need to be paired with two other friends (B & C) for three-way conference intercom. 2. Start an intercom conversation with one of the two friends in your intercom group. For example, you (A) may start an intercom conversation with the intercom friend (B). Or intercom friend (B) may start an intercom call with you (A). 3. The second intercom friend (C) may join the intercom by making an intercom call to you (A). 4. Now you (A) and two Snowtalk intercom friends (B & C) are having a three-way conference intercom. 9.2 End Three-way Intercom When you are a member of an active three-way conference intercom, you can completely terminate the conference intercom or just disconnect an intercom connection with one of your active intercom friends. 1. Press the (L) Button for 1 second until you hear a beep to terminate three-way conference intercom completely. It 13 terminates both intercom connections with (B) and (C). 2. Tap or double tap the (L) Button to disconnect intercom connection with one of the two intercom friends accordingly. For example, by single tapping the (L) Button, you can just terminate the intercom connection with the first intercom friend (B). However, you still have the intercom connection with your second intercom friend (C).
| Snowtalk Result
(L) Button Operation Disconnect (B) & (C) Disconnect (B) Disconnect (C) Press for 1 Single tap Double tap End Three-way Intercom 10. FOUR-WAY CONFERENCE INTERCOM 10.1 Start Four-way Intercom You can have four-way conference intercom with three other Snowtalk users by adding one more intercom participant to the three-way intercom. While you are having three-way intercom as above in section 14.1, a new participant (D), who is an intercom friend of your intercom friend (C), may join the conference intercom by making an intercom call to your intercom friend (C). Please note that in this case, the new participant (D) is an intercom friend of (C), not of you (A). 10.2 End Four-way Intercom As same in the case of three-way intercom, you can completely get out of the four-way conference intercom or just disconnect a single intercom connection. 1. Press the (L) Button for 1 second until you hear a beep to terminate four-way conference intercom. It terminates the intercom connections between you (A), and your intercom friends (B) and (C). 2. Tap or double tap the (L) Button to disconnect the intercom connection with one of the two intercom friends accordingly. However, when you disconnect the second friend (C) by double tapping the (L) Button, you will be disconnected with the third participant (D) as well. This is because the third participant (D) is connected with you via the second friend (C). Result Disconnect (B), (C) & (D) Disconnect (B) Disconnect (C) & (D)
(L) Button Operation Press for 1 Single tap Double tap End Four-way Intercom 14 11. INTERCOM AND MOBILE PHONE CALL
| Snowtalk 1. When you have an incoming mobile phone call during an intercom conversation, you will hear a ring tone. You can choose whether to 1) answer the mobile phone call and stop the intercom conversation, or 2) reject the phone call and stay on the intercom conversation. a. To answer the phone call and stop the intercom conversation, tap the (L) Button. When you hang up the phone call, the intercom will be automatically recovered. b. To reject the phone call and stay on the intercom conversation, press the (R) Button for 2 seconds until you hear a beep. 2. When you have an incoming intercom call during a mobile phone call, you will hear 4 high tone beeps, alerting you that there is an incoming intercom call. You will also hear a voice prompt saying Intercom requested. In this case, the intercom call does not override the mobile phone call because intercom has lower priority than mobile call. You have to hang up the mobile phone call to receive an intercom call. 3. You can make an intercom call to the intercom friend by tapping the (L) Button to form a three-way conference call with the person on the mobile phone line. To disconnect the intercom first and go back to your private mobile phone call, terminate the intercom by tapping the (L) Button. To end the mobile phone call first and maintain the intercom conversation, press the (R) Button for one second. Tap (L) Button while having a mobile phone call Start Tap (L) Button End intercom first Press (R) Button for one second or Wait for the called person to end the call End phone call first Start & End Three-way Conference Phone Call 12. SNOWTALK CONFIGURATION SETTING You can set the configuration of the headset by the voice menu instruction as below. 1. To enter into voice configuration menu, press and hold either the (L) Button or the (R) Button for 10 seconds until you hear high-tone double beeps. You will also hear a voice prompt saying Configuration menu. 2. Press the (L) Button to navigate through the menus. You will hear voice prompts for each menu items as below. 3. You can enable or disable the feature or execute the command by tapping the (R) Button. 4. If none of the buttons is pressed within 10 seconds, the Snowtalk will exit the configuration and goes back to stand-
by. 15 5. If you want to exit the configuration immediately, press the (L) Button until you hear a voice prompt Exit configuration, and tap the (R) Button.
| Snowtalk The voice prompt for each menu item is as below:
(1) Phone pairing
(2) Multipoint pairing
(3) Voice prompt
(4) Sidetone
(5) Noise control
(6) Delete all pairings
(7) Factory reset
(8) Exit configuration 12.1 Mobile Phone Pairing Phone pairing N/A Voice Prompt Factory Default To go into mobile phone pairing mode, tap the (+) Button or the (-) Button until you hear the voice prompt, Phone pairing. Please refer to section 5.1 for details on mobile phone pairing. If you tap the (L) Button or the (R) Button, you can exit from the phone pairing mode. 12.2 Multipoint Pairing Multipoint pairing N/A Voice Prompt Factory Default To go into multipoint pairing mode, tap the (L) Button or the (R) Button until you hear the voice prompt, Multipoint pairing. Please refer to section 5.2 for details on multipoint pairing. If you tap the (L) Button or the (R) Button, you can exit from the multipoint pairing mode. 12.3 Enabling/Disabling Voice Prompt Voice prompt Enable Voice Prompt Factory Default Tap the (R) Button Enable / Disable You can disable voice prompts, but the following voice prompts are always on.
- Voice prompts for configuration setting menu 16
- Voice prompts for battery level Indicator 12.4 Enabling/Disabling Sidetone
| Snowtalk
"Sidetone"
Voice Prompt Disable Factory Default Tap the (R) Button Enable / Disable Sidetone allows you to hear what you are speaking during intercom conversation or a phone call. It helps you to naturally speak at the correct level according to varying helmet noise conditions. 12.5 Enabling/Disabling Advanced Noise Control
"Noise control"
Voice Prompt Enable Factory Default Tap the (R) Button Enable / Disable When Advanced Noise Control is enabled, the background noise is reduced during an intercom conversation. When it is disabled, the background noise is mixed with your voice during intercom. Note:
If you use the headset with the Bluetooth Audio Pack for GoPro, you can enable or disable this feature only during Normal Voice Recording. This feature is automatically disabled while in Ultra HD (UHD) Voice Recording mode. 12.6 Delete All Bluetooth Pairing Information Delete all pairings Voice Prompt N/A Factory Default Tap the (R) Button Execute To delete all Bluetooth pairing information of the Snowtalk, tap the (R) Button when you hear a voice prompt, Delete all pairings. 12.7 Reset to Factory Default Setting 17
| Snowtalk Factory reset Voice Prompt N/A Factory Default Tap the (R) Button Execute To restore factory default settings on the Snowtalk, tap the (R) Button when you hear a voice prompt, Factory reset. 12.8 Exit Voice Configuration Menu Exit configuration Voice Prompt N/A Factory Default Tap the (R) Button Execute To exit voice configuration menu and return to stand-by mode, tap the (R) Button when you hear a voice prompt, Exit configuration. Tap (R) Button Enable / disable Enable / disable Tap (L) Button Voice prompt Sidetone Enable / disable Advanced noise control Execute Execute Delete All Pairings Factory Reset Execute Exit Configuration Voice Configuration Menu & Button Operations 13. FAULT RESET When the Snowtalk is not working properly or is in faulty status for any reason, you may reset by pushing the pin-hole reset button at the back of the headset main unit. Insert a paper clip into the reset pin-hole and press the reset button for a second with light pressure. The Snowtalk will be switched off, and you have to turn the system back on and try again. However, this will not restore the headset to factory default settings. 14. FIRMWARE UPGRADE 18
| Snowtalk The Device Manager allows you to upgrade the firmware and configure the device settings directly from your PC. It is available to download for both Windows and Mac. For more information on downloading the Device Manager, please visit www.sena.com. 15. OPERATION QUICK REFERENCE Beep Duration Button Operation Type Ascending Beeps 1 sec
(R) + (L) Button Tap Tap
(R) + (L) Button
(R) Button Power on Power off Volume up Double Tap
(R) Button Volume down Basic Function
(R) Button
(R) Button Mobile phone pairing Mobile Phone Multipoint pairing Descending Beeps
-
-
Multiple beeps Multiple beeps
-
-
-
-
Double tone beeps
-
5 sec 5 sec Tap 1 sec 3 sec 1 sec 5 sec Tap Mid-tone single beep 1 sec
-
Tap Mid-tone double beeps 1 sec 2 sec 2 sec
-
-
Intercom Music
(R) Button within 2 sec
(R) Button
(R) Button
(R) Button
(R) Button
(L) Button
(L) Button
(L) Button
(L) Button
(L) Button
(L) Button
(L) Button Answer mobile phone call End/reject mobile phone call Last number redial Voice dialer Intercom pairing Start/end intercom End conference intercom Cancel intercom reconnection Start/pause music Track-forward Track-back 19
| Snowtalk CERTIFICATION AND SAFETY APPROVALS FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and the receiver Reorient or relocate the receiving antennae Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC RF Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. FCC Caution Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void users authority to operate the equipment. CE Declaration of Conformity This product is CE marked according to the provisions of the R&TTE Directive (99/5/EC). Hereby, Sena declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For further information, please consult www.SenaBluetooth.com. Please note that this product uses radio frequency bands not harmonized within EU. Within the EU this product is intended to be used in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden, United Kingdom and within EFTA in Iceland, Norway and Switzerland. 20
| Snowtalk Industry Canada Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Bluetooth License The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. Other trademarks and trade names are those of their respective owners. The product is compliant with and adopts the Bluetooth Specification 3.0 and has successfully passed all interoperability tests that are specified in the Bluetooth specification. However, interoperability between the device and other Bluetooth-enabled products is not guaranteed. WEEE (Waste Electrical and Electronic Equipment ) The crossed-out wheel bin symbol on the product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies to the European Union and other locations where separate collection systems are available. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please do not dispose of these products as unsorted municipal waste, but hand it in at an official collection point for recycling. SAFETY INFORMATION Please ensure that the product is properly used by observing the warnings and cautions below to prevent any risk and/or damage to property. Product Storage and Management Keep the product free of dust. It may damage mechanical and electronic parts of the product. Do not store the product in high temperatures as this may reduce the life span of electronic devices, damage the battery, and/or melt plastic parts of the product. Do not store the product in cold temperatures. Abrupt changes in temperatures may cause condensation and damage electronic circuits. Do not clean the product with cleaning solvents, toxic chemicals, or strong detergents as this may damage the product. Do not paint the product. Paint may obstruct moving parts or interfere with the normal operation of the product. Do not drop or otherwise shock the product. It may damage the product or its internal electronic circuits. 21 Do not disassemble, repair or modify the product as this may damage the product and invalidate the product
| Snowtalk warranty. Product Use In some regions, it is prohibited by law to ride motorcycles or bicycles while wearing headsets. Therefore be certain to comply with all relevant laws in the region before using the product. Use of the product at a high volume for a long period of time may damage your eardrums or hearing ability. Keep the volume at a modest level. Do not cause impact to the product or touch it with sharp tools as this may damage the product. Do not use the product in high-temperatures or apply heat to the product as this may cause damage, explosion, or fire. Keep the product dry and away from water. It may damage the product. Keep product away from pets or small children. It may damage the product or cause accidents. Do not use the product near a microwave oven or a wireless LAN device as this may cause malfunction or interference with the product. In any place where wireless communication is prohibited, such as hospitals or airplanes, turn off the power and refrain from using the product. In a place where wireless communication is prohibited, electromagnetic waves may cause hazards or accidents. Do not use the product near hazardous explosives. When there are near any explosion hazards, turn off the power and heed any regulations, instructions, and signs in the area. When using the product, drive at a low speed (slower than 35km/h) for safety. In addition, be certain to conform to laws regarding the use of communications devices while driving. Do not put the product where it may hamper the driver's vision or manipulate it while driving. This may cause traffic accidents. Before driving, fasten the product to the helmet, and double-check that it is fastened. Separation of the product while driving may cause damage to the product or accidents. If the product is damaged, stop using it immediately. It may cause damage, explosion, or fire. Battery This product has an irreplaceable rechargeable battery inside. Therefore, when using the product, make sure to adhere to the following:
Never separate the battery from the product as this may damage the product. The battery performance may be reduced over time with usage. In recharging the battery, make sure to use an approved charger provided by the manufacturer. Use of a non-
approved charger may cause fire, explosion, leakage, and other hazards may also reduce the life time or performance of the battery. Store the battery at temperatures of 15C~25C (59F~77F). Higher or lower temperatures may reduce the capacity and life of the battery, or may cause temporary non-operation. Do not use the product in sub-zero 22
| Snowtalk temperature, because it may cause serious reduction of the battery performance. If you apply heat to the battery or throw it into fire, it may explode. Do not use the product with a damaged battery. It may explode and/or cause accidents. Never use a damaged charger. It may explode and/or cause accidents. Battery life may vary depending on conditions, environmental factors, functions of the product in use, and devices used with it. PRODUCT WARRANTY AND DISCLAIMER Limited Warranty Limited Warranty Sena Technologies, Inc. (Sena) guarantees the product quality based on the technical specification stated in the product manual, and data regarding product warranty. Here, product warranty extends to the product only. Sena will not be liable for any loss, damage of human life, or loss of property which may result from using the product beyond defective parts or flaws that occur due to problems in manufacture. Warranty Period Sena guarantees free-of-charge replacements of defective parts of the product or flaws that may have occurred due to problems in manufacture for a period of 2 years from the date of initial purchase. Termination Quality warranty of the product becomes effective on the date of initial purchase. In addition, the quality warranty of the product expires when the warranty period expires. However, in the following cases, the warranty will be terminated prematurely. In the event the product has been sold or transferred to a third party. In the event the manufacturer's name, serial number, product label, or other markings have been modified or removed. In the event any unauthorized person has tried to disassemble, repair, or modify the product. Notice and Waiver By buying and using this product, you relinquish considerable legal rights including any claim for compensation for damages. Therefore, be certain to read and understand the following terms and conditions before using the product. Use of this product will constitute consent to this agreement, and forfeiture of rights to all claims. If you do not consent to all the terms and conditions of this agreement, return the product for a refund. (Refer to the section "Return for Full Refund".) 1. You agree that you, your descendants, legal proxies, successors, or transferees will not raise permanent volitional request for any suit, claim, implementation, redemption or similar action from Sena with regard to any occasion such as difficulty, pain, suffering, inconvenience, loss, injury, or death which may occur to you or a third party during the use of this product. 2. You must completely understand and accept all risks (including those occurring due to any careless behavior of 23
| Snowtalk yours or others) which may occur during the use of this product. 3. You are responsible for ensuring that your medical condition permits usage of the product and that you are in sufficient physical condition for using any device which can be used with it. In addition, you must ensure that the product does not limit your abilities and that you are able to use it safely. 4. You must be an adult who can take responsibilities for using the product. 5. You must read and understand the following warnings and alerts:
Sena; together with employees, managers, partners, subsidiaries, representatives, agents, supporting firms and suppliers, sole sellers of Sena (collectively referred to as "the company") recommend that, before using the product and similar devices of any brands including its derivative models, you collect any relevant information in advance and be entirely prepared in terms of weather, traffic situation, and road conditions. When you use the product while you operating any vehicle or equipment such as motorcycles, scooters, mopeds, ATVs, or quad-bikes (hereinafter called as "transportation means"), you must take complete caution regardless of the location of such operation. Use of the product on the road may cause such risks as fracture, serious disability, or death. Risk factors, which may occur when you use the product, may be due to errors of the manufacturer, its agents, or third parties which are involved in the manufacturing. Risk factors, which may occur when you use the product, may be unforeseeable. Therefore, you must take full responsibility for any damage or loss caused by all risk factors which may occur when using the product. When you use the product, use good judgment; never use it under the influence of alcohol. 6. You must read and completely understand all terms and conditions of legal rights and warnings that are involved in using the product. In addition, usage of the product constitutes acceptance of all terms and conditions regarding waiver of rights. Warranty Exclusions Reasons for Limited Liabilities If you do not return the product after purchasing it, you relinquish all rights to liabilities, loss, claims, and claims for reimbursement of expenses (including attorney's fees). Therefore, Sena will not be liable for physical injury, death, or any loss or damage of transportation means, possessions, or assets which belong to you or third parties that may have occurred while you use the product. Further, Sena will not be liable for any substantial damage not related to the, condition, environment, or malfunction of the product. All risks related with the operation of the product depend entirely on the user regardless of its use by the initial purchaser of a third party. Use of this product may violate local or national laws. In addition, be aware once again that correct and safe use of the product is entirely your responsibility. Limitation of Liability TO THE FULL EXTENT ALLOWED BY LAW, SENA EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, 24
| Snowtalk INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS PRODUCTS, EVEN IF SENA OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT SENAS OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. IN ANY CASE, THE TOTAL COMPENSATION LIABILITIES OF SENA OR ITS SALES AGENTS SHALL NOT EXCEED THE PRICE PAID FOR THE PRODUCT BY THE PURCHASER. Liabilities Disclaimer In addition to damages which may occur due to the use of the product, Sena will not be liable for damages of the product which occur due to the following events. In the event the product is misused or used for purposes other than its intended purposes. In the event the product is damaged because the user does not follow the content of the product manual. In the event the product is damaged because it has been left unattended or has undergone any other accident. In the event the product is damaged because the user has used any parts or software which are not provided by the manufacturer. In the event the product is damaged because the user has disassembled, repaired, or modified it in such way as is not explained in the product manual. In the event the product is damaged by a third party. In the event the product is damaged due to Acts of God (including fire, flood, earthquake, storm, hurricane or other natural disaster). In the event the surface of the product is damaged by use. Warranty Service To obtain product warranty service, send the defective product, at your expense, to the manufacturer or the seller along with proof of purchase (a receipt that shows the purchase date, a product registration certificate of the Website, and other relevant information). Take necessary measures to protect the product. In order to get a refund or replacement, you must include the whole package as it was purchased. Free-of-charge Service Sena will provide free-of-charge repair or replacement service for the product when product defects occur within the scope of the product warranty during the warranty period. Charged Service 25 Sena will provide charged repair or replacement service for the product when the product warranty period has been expired or when the product damage is beyond the scope of the product warranty. For further information on charged service, you may contact the service center of Sena.
| Snowtalk Return for Full Refund Should you not agree to the terms and conditions explained above, you may return the product for a full refund. To get a refund, within 14 days from the purchase date you must return the product to the seller in such a condition as it was purchased. Unless you return the product within 14 days from the purchase date, you will have read and agreed to all the terms and conditions explained above, and Sena will not be liable for any claim for damages related with the product. 26
| Snowtalk CERTIFICATION ET HOMOLOGATION EN TERMES DE SCURIT Dclaration de conformit FCC Cet appareil est en conformit avec la partie 15 de la rglementation FCC. L'exploitation est autorise aux deux conditions suivantes :
(1) Cet appareil ne doit pas crer dinterfrences prjudiciables et
(2) Cet appareil doit accepter toutes les interfrences reues, y compris celles qui pourraient entraver son bon fonctionnement. Ce matriel a t test et dclar en conformit avec les limites d'un appareil numrique de Classe B, suivant la partie 15 de la rglementation FCC. Ces limites sont destines assurer une protection raisonnable contre les interfrences prjudiciables dans un environnement rsidentiel. Ce matriel gnre, utilise et peut dgager de lnergie en radio frquence et, sil nest pas install et utilis en conformit avec les instructions, peut provoquer des interfrences prjudiciables avec les communications radio. Cependant, il ny a aucune garantie que des interfrences ne se produiront pas dans des installations particulires. Si ce matriel provoque des interfrences prjudiciables une rception radio ou TV, ce qui peut tre dtermin en allumant puis en teignant l'appareil, il est vivement recommand l'utilisateur d'essayer de mettre un terme ces interfrences en prenant l'une des mesures suivantes :
Rorienter ou repositionner l'antenne rceptrice Augmenter la sparation entre le matriel et le rcepteur. Connecter le matriel une sortie sur un circuit diffrent de celui sur lequel le rcepteur est connect. Contacter le revendeur ou un technicien radio/TV expriment pour une assistance. nonc FCC sur lexposition aux radiations RF :
Cet quipement est conforme aux rglementations FCC dexposition aux radiations dfinies pour un environnement non contrl. Les utilisateurs suivront les instructions dexploitation spcifiques pour rpondre aux exigences de conformit sur lexposition aux RF. Lantenne utilise pour cet appareil ne doit pas fonctionner en mme temps quune autre antenne ou metteur, sauf s'il y a conformit avec les procdures FCC des produits multi-metteurs. Prcautions FCC Tout changement ou modification apport au matriel qui naurait pas t approuv par le responsable de la conformit pourrait invalider le droit de lutilisateur faire fonctionner ce matriel. Dclaration de conformit CE Ce produit porte un marquage CE, conformment aux dispositions de la directive R&TTE (99/5/CE). Sena dclare par la prsente que ce produit est conforme aux exigences principales et autres dispositions correspondantes de la directive 1999/5/CE. Pour plus dinformations, veuillez consulter le site www.senabluetooth.fr. Veuillez noter que ce produit utilise des bandes de radio frquence non uniformises au sein de lUnion Europenne. Au sein de lUnion Europenne, ce 27
| Snowtalk produit est destin tre utilis en Autriche, Belgique, Danemark, Finlande, France, Allemagne, Grce, Irlande, Italie, Luxembourg, Pays-Bas, Portugal, Espagne, Sude et Royaume-Uni et au sein de lAELE, en Islande, Norvge et Suisse. Dclaration de conformit IC (Industrie Canada) Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) Cet appareil ne doit pas crer d'interfrences.
(2) Cet appareil doit accepter toutes les interfrences reues, y compris celles qui pourraient entraver son bon fonctionnement. Licence Bluetooth La marque et les logos Bluetooth sont la proprit de Bluetooth SIG, Inc et toute utilisation de ces marques par Sena s'effectue sous licence. Dautres marques et appellations commerciales sont celles de leurs propritaires respectifs. Le produit est conforme et suit la spcification Bluetooth 3.0 et a russi tous les tests d'interoprabilit mentionns dans la spcification Bluetooth. Cependant, l'interoprabilit entre l'appareil et d'autres produits Bluetooth n'est pas garantie. WEEE(DEEE:Dchets d'quipements lectriques et lectroniques) Le symbole poubelle barre figurant sur le produit, la documentation ou lemballage signifie que tous les produits lectriques et lectroniques, les batteries et les accumulateurs doivent tre conduits en fin de vie dans une structure de rcupration et de recyclage spare. Cette exigence sapplique lUnion Europenne mais aussi aux autres pays o des systmes de rcupration et de recyclage spars existent. Pour prvenir toutes les consquences possibles pour lenvironnement ou la sant dune limination de dchets non con- trle, veuillez ne pas considrer ces produits comme des dchets m- nagers, mais vous rendre dans une structure de rcupration officielle pour le recyclage. INFORMATIONS SUR LA SCURIT Veuillez vous assurer que le produit est utilis de manire adquate en respectant les avertissements et prcautions numrs ci-dessous pour viter tout risque et/ou dommage matriel. Rangement du produit et manipulation Garder le produit l'abri de la poussire. Cela pourrait endommager les pices mcaniques et lectroniques du produit. Ne pas ranger le produit dans des zones chaudes car cela pourrait rduire la dure de vie des appareils lectroniques, endommager la batterie et/ou faire fondre les pices en plastique du produit. Ne pas stocker l'appareil dans des zones froides. Des changements de tempratures brusques peuvent former de la condensation et endommager les circuits lectroniques. Ne pas nettoyer le produit avec des solvants de nettoyage, des 28 produits chimiques toxiques ou des dtergents puissants car cela pourrait endommager le produit. Ne pas peindre le produit. La peinture pourrait obstruer les pices amovibles ou interfrer avec le fonctionnement normal du produit. Ne pas laisser tomber ou cogner l'appareil. Cela pourrait endommager le produit ou ses circuits lectroniques internes. Ne pas dmonter, rparer ou modifier le produit car cela pourrait endommager le produit et annuler la garantie du produit. Utilisation du produit
| Snowtalk Dans certaines rgions, la loi interdit le port d'couteurs en tant moto ou vlo. Assurez-vous donc de respecter toutes les lois correspondantes dans la rgion avant d'utiliser le produit. L'utilisation du produit volume lev pendant une priode prolonge peut endommager les tympans ou la capacit auditive. Garder le volume sonore un niveau modr. Ne pas heurter le produit ou le toucher avec des outils tranchants car cela pourrait l'endommager. Ne pas utiliser le produit dans des zones chaudes ou chauffer le produit car cela pourrait occasionner des dommages ou provoquer une explosion ou un incendie. Garder le produit au sec et l'abri de l'eau. Cela pourrait endommager le produit. Tenir le produit hors de porte des animaux ou jeunes enfants. Cela pourrait endommager le produit ou provoquer des accidents. Ne pas utiliser le produit prs d'un four micro-ondes ou d'un appareil LAN sans fil car cela pourrait provoquer un dysfonctionnement ou des interfrences avec le produit. teindre et ne pas utiliser pas le produit dans les endroits o les communications sans fil sont interdites comme les hpitaux ou les avions. Les ondes lectromagntiques peuvent entraner des risques ou des accidents dans ces endroits. Ne pas utiliser le produit prs d'explosifs. En cas de risques d'explosion proximit, teindre le produit et respecter toute rglementation, instruction ou panneau prsent dans la zone. Pour des raisons de scurit, conduire faible vitesse (infrieure 35 km/h) pendant l'utilisation du produit. S'assurer en outre de respecter les lois concernant l'utilisation des appareils de communication lors de la conduite. Ne pas mettre le produit un endroit o il pourrait entraver le champ de vision du conducteur et ne pas le manipuler durant la conduite. Cela pourrait causer des accidents de la route. Avant de conduire, attacher le produit au casque et s'assurer qu'il est bien fix. Le retrait du produit durant la conduite peut provoquer des dommages au produit ou des accidents. Si le produit est endommag, arrter immdiatement de l'utiliser. Cela pourrait entraner des dommages, une explosion ou un incendie. Batterie Ce produit contient une batterie rechargeable irremplaable l'intrieur. S'assurer par consquent lors de l'utilisation du produit de respecter ce qui suit :
Ne jamais sparer la batterie du produit car cela pourrait endommager le produit. Les performances de la batterie peuvent s'altrer au fur et mesure de son utilisation. 29
| Snowtalk Pendant le chargement de la batterie, s'assurer d'utiliser un chargeur agr fourni par le fabricant. Utiliser un chargeur non agr peut entraner un incendie, une explosion, une fuite et d'autres risques et peut galement rduire la dure de vie ou les performances de la batterie. Conserver la batterie des tempratures entre 15 C et 25 C. Des tempratures suprieures ou infrieures peuvent rduire la capacit et la dure de vie de la batterie ou empcher momentanment l'utilisation de celle-ci. Ne pas utiliser le produit en cas de tempratures en dessous de zro car cela pourrait causer une rduction significative des performances de la batterie. Chauffer la batterie ou la jeter au feu peut provoquer son explosion. Ne pas utiliser le produit avec une batterie endommage. Il pourrait exploser et/ou causer des accidents. Ne jamais utiliser un chargeur endommag. Il pourrait exploser et/ou causer des accidents. La dure de vie de la batterie dpend des conditions, des facteurs environnementaux, des fonctions en cours d'utilisation du produit et des appareils utiliss conjointement. Garantie limite Garantie limite Sena Technologies, Inc. ( Sena ) garantit la qualit du produit sur la base des caractristiques techniques nonces dans le manuel du produit et les donnes concernant la garantie du produit. La garantie du produit s'tend ici seulement au produit. Sena n'est pas responsable des pertes, blessures aux personnes ou pertes de proprits qui pourraient rsulter de l'utilisation du produit en dehors des pices dfectueuses ou des dfauts survenant en raison de problmes lors de la fabrication. Priode de garantie Sena garantit le remplacement sans frais des pices dfectueuses du produit ou des dfauts ayant pu survenir en raison de problmes lors de la fabrication pour une priode de deux ans compter de la date d'achat initiale FIN DE LA GARANTIE La garantie de qualit du produit prend effet le jour de l'achat initial. De plus, la garantie de qualit du produit expire lorsque la priode de garantie expire. Dans les cas suivants toutefois, la garantie prendra fin avant terme. Dans le cas o le produit a t vendu ou transfr un tiers. Dans le cas o le nom, le numro de srie, l'tiquette du produit ou d'autres marquages du fabricant ont t modifis ou supprims. Dans le cas o une personne non autorise a tent de dmonter, rparer ou modifier le produit. Avis et renonciation En achetant et en utilisant ce produit, vous renoncez des droits lgaux importants y compris les demandes d'indemnisation pour dommages. En consquence, assurez-vous de lire et de comprendre les conditions suivantes avant d'utiliser le produit. L'utilisation de ce produit constitue un consentement au prsent accord et un renoncement aux droits toute indemnisation. Si vous ne consentez pas toutes les conditions du prsent accord, renvoyez le produit pour un 30
| Snowtalk remboursement. (Reportez-vous la section Renvoi pour remboursement total .) 1. Vous convenez que vous, vos descendants, reprsentants lgaux, hritiers, ou cessionnaires ne ferez de votre propre gr et, de manire permanente, de demande de procs, d'indemnisation, d'excution, de rachat ou toute action similaire l'encontre de Sena concernant toute occasion comme la difficult, la douleur, la souffrance, le dsagrment, la perte, la blessure ou le dcs qui se produirait votre encontre ou un tiers durant l'utilisation de ce produit. 2. Vous devez parfaitement comprendre et accepter tous les risques (y compris ceux se produisant en raison de votre ngligence ou d'autres) pouvant survenir durant l'utilisation de ce produit. 3. Vous avez la responsabilit de vous assurer que votre condition mdicale permet l'utilisation du produit et que votre condition physique est suffisante pour utiliser tout appareil pouvant tre utilis conjointement. De plus, vous devez vous assurer que le produit ne limite pas vos capacits et que vous tes en mesure de l'utiliser en toute scurit. 4. Vous devez tre majeur et porter la responsabilit de l'utilisation du produit. 5. Vous devez lire et comprendre les avertissements et les alertes suivantes :
Sena, en collaboration avec les employs, responsables, partenaires, filiales, reprsentants, agents, entreprises et fournisseurs impliqus, seuls vendeurs de Sena (collectivement dsigns comme l'entreprise ) vous recommandent, avant d'utiliser le produit et des appareils similaires de diffrentes marques y compris leurs modles drivs, de recueillir l'avance toutes les informations pertinentes et d'tre entirement prpar quant aux conditions mtorologiques et routires ainsi qu' l'tat de la circulation. Si vous utilisez le produit tout en conduisant un vhicule tel que des motos, scooters, cyclomoteurs, quatre-quatre ou quads (ci-aprs dnomms moyens de transport ), vous devez faire preuve de la plus grande prudence quel que soit l'endroit d'utilisation. L'utilisation du produit sur la route peut entraner des risques de fractures, d'invalidit grave ou de dcs. Les facteurs de risque, pouvant survenir lorsque vous utilisez le produit, peuvent rsulter d'erreurs du fabricant, de ses agents ou de tiers impliqus dans la fabrication. Les facteurs de risque pouvant survenir lorsque vous utilisez le produit, peuvent tre imprvisibles. Vous devez par consquent porter l'entire responsabilit pour tout dommage ou perte cause par l'ensemble des facteurs de risque pouvant survenir lors de l'utilisation du produit. Lorsque vous utilisez le produit, faites preuve de discernement ; ne l'utilisez jamais sous l'emprise de l'alcool. 6. Vous devez lire et comprendre intgralement toutes les conditions se rapportant aux droits lgaux et aux avertissements quimplique l'utilisation du produit. L'utilisation du produit constitue en outre une acceptation de l'ensemble des conditions concernant la renonciation des droits. Exclusions de garantie Raisons des limitations de responsabilit Si vous ne renvoyez pas le produit aprs l'avoir achet, vous renoncez tous les droits de responsabilit, de pertes, de rclamations et d'indemnisations pour le remboursement des dpenses (y compris les honoraires d'avocat). Par consquent, Sena n'est pas responsable des blessures physiques, dcs ou pertes ou dommages des moyens de transport, possessions ou actifs vous appartenant ou appartenant des tiers ayant pu se produire lors de votre utilisation du produit. D'autre part, Sena n'est pas responsable des dommages substantiels qui ne sont pas lis l'tat, l'environnement ou au dysfonctionnement du produit. Tous les risques associs l'utilisation du produit dpendent 31
| Snowtalk entirement de l'utilisateur, quelle que soit son utilisation par l'acheteur d'origine ou d'un tiers. L'utilisation de ce produit peut tre contraire aux lois locales et nationales. De plus, soyez bien conscient que l'utilisation adquate et sans danger de ce produit relve de votre entire responsabilit. Limitation de responsabilit DANS LES LIMITES PERMISES PAR LA LOI, SENA EXCLUT POUR ELLE-MME ET SES FOURNISSEURS TOUTE RESPONSABILIT CONTRACTUELLE OU DLICTUELLE (Y COMPRIS UNE NGLIGENCE) DE TOUT DOMMAGE DIRECT, CONSCUTIF, INDIRECT OU PUNITIF DE QUELQUE NATURE QUE CE SOIT, OU POUR LA PERTE DE REVENUS OU DE PROFITS, PERTES COMMERCIALES, PERTES D'INFORMATIONS OU DE DONNES OU TOUTE AUTRE PERTE FINANCIRE RSULTANT DE OU EN RELATION LA VENTE, L'INSTALLATION, L'ENTRETIEN, L'UTILISATION, LA PERFORMANCE, LA PANNE OU L'INTERRUPTION DE SES PRODUITS, MME SI SENA OU SES REVENDEURS AUTORISS ONT T AVERTIS DE L'VENTUALIT DE TELS DOMMAGES, ET LIMITE SA RESPONSABILIT RPARER, REMPLACER OU REMBOURSER LE PRIX D'ACHAT PAY, AU CHOIX DE SENA. CET AVIS DE NON RESPONSABILIT POUR LES DOMMAGES NE SERA PAS AFFECT SI UN RECOURS APPORT PRSENTEMENT N'ATTEINT PAS SON BUT ESSENTIEL. DANS TOUS LES CAS, LES RESPONSABILITS D'INDEMNISATIONS TOTALES DE SENA OU DE SES AGENTS DE VENTE NE PEUVENT DPASSER LE PRIX PAY POUR LE PRODUIT PAR L'ACHETEUR. Exonration de responsabilits Outre les dommages pouvant survenir en raison de l'utilisation du produit, Sena n'est pas tenu responsable des dommages du produit survenant en raison des situations suivantes. Dans le cas o il est fait mauvais usage du produit ou qu'il est utilis dans un but autre que celui prvu. Dans le cas o le produit est endommag car l'utilisateur ne suit pas le contenu du manuel du produit. Dans le cas o le produit est endommag car il a t laiss sans surveillance ou a subi un autre accident. Dans le cas o le produit est endommag car l'utilisateur s'est servi de pices ou d'un logiciel n'tant pas fourni par le fabricant. Dans le cas o le produit est endommag car l'utilisateur l'a dmont, rpar ou modifi d'une manire ne figurant pas dans le manuel du produit. Dans le cas o le produit est endommag par un tiers. Dans le cas o le produit est endommag en raison d'vnements imprvisibles (y compris les incendies, inondations, tremblements de terre, temptes, ouragans et autres catastrophes naturelles). Dans le cas o la surface du produit est endommage pour cause d'usure. Service de garantie Pour faire valoir vos droits un service de garantie du produit, envoyez le produit dfectueux, vos frais, au fabricant ou revendeur accompagn de la preuve d'achat (un reu indiquant la date d'achat, le certificat d'enregistrement du produit du site internet et d'autres informations pertinentes). Prenez les mesures ncessaires pour protger le produit. Afin d'obtenir le remboursement ou le remplacement du produit, vous devez inclure la totalit du paquet comme au moment de l'achat. Service sans frais Sena offre un service de rparation ou de remplacement sans frais du produit lorsque les dfauts de produit rentrent dans la limite de la garantie du produit durant la priode de garantie. 32
| Snowtalk Service payant Sena offre un service de rparation ou de remplacement payant du produit lorsque la priode de garantie du produit a expir ou lorsque les dommages causs au produit sortent du cadre de la garantie du produit. Pour de plus amples informations sur le service payant, vous pouvez contacter le centre de services de Sena. Renvoi pour remboursement total Si vous n'tes pas d'accord avec les conditions exposes ci-dessus, vous pouvez renvoyer le produit pour un remboursement total. Pour obtenir le remboursement, vous devez renvoyer le produit au vendeur dans le mme tat dans lequel il a t achet, dans une priode de 14 jours compter de la date d'achat. moins de renvoyer le produit dans une priode de 14 jours compter de la date d'achat, vous aurez lu et accept l'ensemble des conditions exposes ci-dessus et Sena ne sera pas responsable de toute rclamation ou dommages associs au produit. v1.0 SENA www.sena.com User's Guide for Firmware v1.0 33
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2014-11-18 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2014-11-18
|
||||
1 | Applicant's complete, legal business name |
SENA TECHNOLOGIES.Inc
|
||||
1 | FCC Registration Number (FRN) |
0013268917
|
||||
1 | Physical Address |
19, Heolleung-ro 569-gil, Gangnam-gu
|
||||
1 |
Seoul, N/A
|
|||||
1 |
South Korea
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
S7A
|
||||
1 | Equipment Product Code |
SP18
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
S******** K********
|
||||
1 | Title |
Research Engineer
|
||||
1 | Telephone Number |
82257******** Extension:
|
||||
1 | Fax Number |
82257********
|
||||
1 |
s******@sena.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 05/17/2015 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | BLUETOOTH STEREO SNOW HEADSET | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power listed is conducted. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
LTA Co.,Ltd
|
||||
1 | Name |
A******** C****
|
||||
1 | Telephone Number |
82-31********
|
||||
1 | Fax Number |
82-31********
|
||||
1 |
c******@ltalab.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0081000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC