User Manual Copyright 2019. Lab-T, Inc. B2M Manual Power On/Off Button for 1 sec Bluetooth Intercom Pairing 1. Turn on the B2M(Factory default) or Button for 8 sec 2. When B2M and headset are in pairing mode, they are connected automatically. Bluetooth Intercom Start/End Tap the Button Mesh Intercom Start/End 1. When you start the Bluetooth intercom, the mesh intercom starts automatically. 2. When the Bluetooth intercom is stopped, the mesh intercom is automatically stopped. Creating the Mesh 1. 2.
[Creator] Press and Hold the button for 5 seconds to create a mesh.
[Participant] If you receive a mesh invitation message, tap the button to join the mesh. If you receive a mesh invitation message, tap the button 2 times to reject the mesh. Searching the Mesh 1. 2.
[Creator] Press and Hold the button for 5 seconds to find the existing mesh.
[Participant] If you receive a mesh join message, tap the button 2 times to accept the participant. Switch Mesh mode Press and Hold the button for 3 seconds to switch the mode.
(Public mode <-> private mode, public mode <-> guest mode) Troubleshooting Factory Reset To restore the Savage to factory default settings 1. Press and hold the Button for 11 seconds 2. The B2M will be restored to factory setting and switched off automatically. FCC, IC Warning statement Certification and Safety Approvals FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antennae Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. FCC RF Exposure Statement The antenna used in this transmitter must be installed such that a minimum separation distance of 59.00 mm is always maintained from the human head. We, Sena Technologies, Inc. confirm that when equipped in authorized helmet models, the distance between antenna and ones head will not be less than 59.00 mm. Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void users authority to operate the equipment. FCC Caution Industry Canada Statement IC Declaration of Conformity (Industry Canada) This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two condition:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that may cause undesired operation. This device complies with Industry Canada RSS applicable to unlicensed radio equipment. Operation is permitted under both of the following conditions:
(1) This device may not cause interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy. If it is not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference with radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to attempt to correct the interference by applying one or more of the measures. following:
Reorient or move receiving antennas Increase the distance between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio / TV technician for help. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes
: (1) Cet appareil ne doit pas crer d'interfrences.
(2) Cet appareil doit accepter toutes les interfrences reues, y compris celles qui pourraient entraver son bon fonctionnement. Cet quipement a t test et dclar conforme aux limites imposes aux appareils numriques de classe B conformment la section 15 des rgles de la FCC. Ces limites sont conues pour fournir une protection raisonnable contre les interfrences nuisibles dans une installation rsidentielle. Cet quipement gnre, Dclaration de conformit IC (Industrie Canada) utilise et peut mettre de l'nergie de frquence radio. S'il n'est pas install et utilis conformment aux instructions, il peut causer des interfrences nuisibles aux communications radio. Cependant, rien ne garantit que des interfrences ne se produiront pas dans une installation particulire. Si cet quipement provoque des interfrences nuisibles avec la rception de radio ou de tlvision, ce qui peut tre dtermin en allumant et en teignant les quipements, l'utilisateur est invit tenter de corriger l'interfrence en appliquant l'une ou plusieurs des mesures suivantes:
Rorienter ou dplacer les antennes de rception Augmenter la distance entre l'quipement et le rcepteur Branchez lquipement sur une prise dun circuit diffrent de celui auquel le rcepteur est connect. Consultez le revendeur ou un technicien expriment en radio / tlvision pour obtenir de l'aide. Cet quipement est conforme aux rglementations FCC dexposition aux radiations dfinies pour un environnement non contrl. Les utilisateurs suivront les instructions dexploitation spcifiques pour rpondre aux exigences de conformit sur lexposition aux RF. Lantenne utilise pour cet appareil ne doit pas fonctionner en mme temps quune autre antenne ou metteur, sauf s'il y a conformit avec les procdures FCC des produits multi-metteurs. nonc FCC sur lexposition aux radiations RF :
L'antenne utilise dans cet metteur doit tre installe de manire respecter une distance minimale de 59,00 mm par rapport la tte humaine. Nous, Sena Technologies, Inc., confirmons quavec les modles de casques autoriss, la distance entre lantenne et la tte ne sera pas infrieure 59.00 mm. IC Attention Toute modification apporte l'quipement non expressment approuve par la partie responsable de la conformit pourrait annuler l'autorit de l'utilisateur utiliser l'
Manufacturer Sena Technologies,Inc. Address 19, Heolleung-ro 569-gil, Gangnam-gu, Seoul, South Korea