all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 |
|
User Manual | Users Manual | 1.46 MiB | ||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | Attestation Statements | |||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | External Photos | |||||||
1 2 3 4 | Internal Photos | |||||||
1 2 3 4 | Operational Description | |||||||
1 2 3 4 | RF Exposure Info | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Setup Photos | |||||||
1 2 3 4 | Operational Description | February 06 2015 | ||||||
1 2 3 4 | Cover Letter(s) | February 06 2015 | ||||||
1 2 3 4 | Cover Letter(s) | February 06 2015 | ||||||
1 2 3 4 | Cover Letter(s) | February 06 2015 | ||||||
1 2 3 4 | ID Label/Location Info | February 06 2015 | ||||||
1 2 3 4 | ID Label/Location Info | February 06 2015 | ||||||
1 2 3 4 | Test Report | February 06 2015 | ||||||
1 2 3 4 | Operational Description | February 06 2015 | ||||||
1 2 3 4 | Test Report | February 06 2015 |
1 2 3 4 | User Manual | Users Manual | 1.46 MiB |
| 10U 10U Motorcycle Bluetooth Communication System with Handlebar Remote 1
| 10U 1998-2015 Sena Technologies, Inc. All rights reserved. Sena Technologies, Inc reserves the right to make any changes and improvements to its product without providing prior notice. Sena is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. 10U, 10C, Prism, 20S, Snowtalk, 3S, SMH10, SMH5, SMH5-FM, SPH10, SPH10H, SPH10H-FM, SMH10R, SPH10S, SPH10H, SR10, SR10i, SM10, EXPAND, Bluetooth Pack for GoPro are trademarks of Sena Technologies, Inc. or its subsidiaries. These trademarks may not be used without the express permission of Sena. Sena Technologies, Inc. (Sena) is not affiliated with Shoei Co,. Ltd. The Sena 10U for Shoei Neotec is an after-market accessory specially designed and manufactured by Sena Technologies, Inc. for the Shoei Neotec helmets. The Sena 10U for Shoei GT-Air is an after-market accessory specially designed and manufactured by Sena Technologies, Inc. for the Shoei GT-Air helmets. Sena Technologies, Inc. (Sena) is not affiliated with Schuberth-Welk Gmbh. The 10U for Schuberth C3 & C3 pro is an after-market accessory specially designed and manufactured by Sena Technologies, Inc. for the Schuberth C3 & C3 pro helmets. Arai is a registered trademark of Arai Helmet, Ltd. The 10U for Arai full-face helmets is an after-market accessory specially designed and manufactured by Sena Technologies, Inc. for the the Arai full-face helmets. GoPro is a registered trademark of Woodman Labs of San Mateo, California. Sena Technologies, Inc. (Sena) is not affiliated with Woodman Labs. The Sena Bluetooth Pack for GoPro is an after-market accessory specially designed and manufactured by Sena Technologies, Inc. for the GoPro Hero3 allowing for Bluetooth capabilities. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. iPhone, iPod touch are registered trademarks of Apple Inc. Zumo is a trademark of Garmin Ltd. or its subsidiaries. TomTom is the trademark or registered trademark owned by TomTom International B.V. Other trademarks and tradenames are those of their respective owners. 2
| 10U CONTENTS 1 INTRODUCTION 2 PACKAGE CONTENTS 3 INSTALLING THE 10U ON YOUR HELMET 3.1 10U for Shoei GT-Air 3.2 Handlebar Remote 4 GETTING STARTED 4.1 Button Operation 4.2 Powering On and Off 4.2.1 Headset 4.2.2 Handlebar Remote 4.3 Pairing the Headset and the Handlebar Remote 4.4 Charging 4.5 Checking the Battery Level 4.6 Volume Adjustment 4.7 Sena Softwares 4.7.1 Sena Device Manager 4.7.2 Sena Smartphone App 5 PAIRING THE 10U WITH BLUETOOTH DEVICES 5.1 Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo Device 5.2 Second Mobile Phone Pairing - Second Mobile Phone, GPS, and SR10 5.3 Advanced Selective Pairing: A2DP Stereo or Handsfree 5.3.1 A2DP Stereo Music Only 5.3.2 HFP for Phone Call Only 5.4 Intercom Pairing 5.4.1 Pairing with Other 10U Headsets for Intercom Conversation 5.4.2 Pairing with Other Sena Headset Models for Intercom Conversation 6 MOBILE PHONE, GPS, SR10 6.1 Mobile Phone Call Making and Answering 6.2 Speed Dialing 6.3 GPS Navigation 6.4 Sena SR10, Two-Way Radio Adapter 7 STEREO MUSIC 7.1 Bluetooth Stereo Music 7.2 Music Sharing 8 INTERCOM 8.1 Two-way Intercom 8.1.1 Starting Two-way Intercom 3
| 10U 8.1.2 Ending Two-way Intercom 8.2 Three-way Intercom 8.2.1 Starting Three-way Intercom 8.2.2 Ending Three-way Intercom 8.3 Four-way Intercom 8.3.1 Starting Four-way Intercom 8.3.2 Ending Four-way Intercom 9 THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT 10 UNIVERSAL INTERCOM 10.1 Universal Intercom Pairing 10.2 Two-way Universal Intercom 10.3 Three-way Universal Intercom 10.4 Four-way Universal Intercom 10.4.1 Four-way Universal Intercom Case 1 10.4.2 Four-way Universal Intercom Case 2 11 FM RADIO 11.1 FM Radio On/Off 11.2 Preset Stations 11.3 Seek and Save 11.4 Scan and Save 11.5 Temporary Preset 11.6 Region Selection 12 FUNCTION PRIORITY 13 CONFIGURATION SETTING 13.1 Assigning Speed Dial 13.2 Enabling/Disabling Voice Activated Phone Answering 13.3 Enabling/Disabling Voice Activated Intercom 13.4 Enabling/Disabling Voice Prompts 13.5 Enabling/Disabling RDS AF 13.6 Enabling/Disabling Sidetone 13.7 Enabling/Disabling Advanced Noise Control 13.8 Delete All Bluetooth Pairing Information 13.9 Factory Reset 13.10 Remote Control Pairing 13.11 Exit Voice Configuration Menu 14 FIRMWARE UPGRADE 15 TROUBLESHOOTING 15.1 Intercom Failure 15.2 Intercom Reconnection 4
| 10U 15.3 Fault Reset 15.4 Factory Reset 17 OPERATION QUICK REFERENCE 17.1 Using the Handlebar Remote 17.2 Using the Headset Buttons 5 1 INTRODUCTION
| 10U Thank you for choosing the Sena 10U, Motorcycle Bluetooth Communication System with Handlebar Remote. With the 10U, you can control the headset using the Handlebar Remote to call handsfree on your Bluetooth mobile phone, listen to stereo music or voice instructions of GPS navigations wirelessly, and have intercom conversations in full duplex with a passenger or other motorcycle riders. The 10U is compliant with the Bluetooth 4.0 supporting the following profiles: Headset Profile, Hands-Free Profile (HFP), Advanced Audio Distribution Profile (A2DP), and Audio Video Remote Control Profile (AVRCP). Please check with the manufacturers of other device to determine their compatibility with this headset. Please read this Users Guide carefully before using the headset. Also check www.sena.com for the latest version of the Users Guide and additional information related to Sena Bluetooth products. The 10U features:
Bluetooth 4.0 Invisible beauty with custom design Safe and easy operations by Bluetooth Low Energy Handlebar Remote Bluetooth intercom up to 1 kilometer (0.6 miles)*
Four-way intercom Voice prompts Smartphone App for iPhone and Android Built-in FM radio tuner with a station scan and save function Universal Intercom Music sharing Advanced Noise Control Firmware upgradeable
* in open terrain
---------------------------------
Key Specifications:
Bluetooth 4.0 Supporting profiles: Headset Profile, Hands-Free Profile (HFP), Advanced Audio Distribution Profile (A2DP), and Audio Video Remote Control Profile (AVRCP). 6 2 PACKAGE CONTENTS
| 10U 10U Headset Handlebar Remote USB Power and Data Cable Cigarette Charger 7 3 INSTALLING THE 10U ON YOUR HELMET 3.1 10U for Shoei GT-Air
| 10U 1. Before you install the 10U, remove the cheek pads and ear pads of your helmet. 2. Align the right speaker with the right cheek pad base and insert the two clasps in the corresponding notches. 3. Unfasten the two snaps of the center pad in the back and insert the battery unit between the external shell and the inner shell. Click the two snaps through the snap holder of the battery unit. 4. Slide in the antenna between the external shell and the left inner shell. Align its snap holder with the bottom left snap. 5. Align the left speaker with the left cheek pad base and insert the two clasps in the corresponding notches. 6. Insert the control buttons unit between the external shell and the left inner shell. Align its snap holder with the front left snap. 7. Hide the wires behind the center pad and reinstall the cheek pads. Make sure to click the snaps through the snap holders. 8 3.2 10U for Schuberth
| 10U 1. Before you install the 10U, remove the cheek pads and ear pads of your helmet. 2. Align the right speaker with the right cheek pad base and insert the two clasps in the corresponding notches. 3. Unfasten the two snaps of the center pad in the back and insert the battery unit between the external shell and the inner shell. Click the two snaps through the snap holder of the battery unit. 4. Slide in the antenna between the external shell and the left inner shell. Align its snap holder with the bottom left snap. 5. Align the left speaker with the left cheek pad base and insert the two clasps in the corresponding notches. 6. Insert the control buttons unit between the external shell and the left inner shell. Align its snap holder with the front left snap. 7. Hide the wires behind the center pad and reinstall the cheek pads. Make sure to click the snaps through the snap holders 3.2 Handlebar Remote 1. Gently spread the two ends of the Handlebar Remote. 2. Clip it on the left handlebar of your motorcycle. Make sure you can comfortably control the Joystick with your left thumb. 9 4 GETTING STARTED 4.1 Button Operation
| 10U The 10U is controlled by the Bluetooth Handlebar Remote. You must pair them together first. Please refer to section 4.3, Pairing the Headset and the Handlebar Remote for more details. If the Handlebar Remote runs out of battery, you can use the emergency buttons on the headset to control the functions. Please refer to section 17.2, Using the Headset Buttons for more details. Front Button Enter into mobile phone pairing mode Answer and end a mobile phone call Speed Dial Call transfer between mobile phone and headset Turn on/off FM tuner Joystick Volume adjustment Enter into intercom pairing mode Start and end intercom conversation Answer and end a mobile phone call Reject an incoming mobile phone call Play and pause Bluetooth stereo device Track forward and track back music Enter into voice configuration setting Navigate through configuration menu Seek FM radio station Rear Button Enter into headset pairing mode 10 4.2 Powering On and Off 4.2.1 Headset
| 10U To power on the headset, press the (+) Button and the (-) Button at the same time while hearing ascending beeps and a voice prompt, Hello. To power off the headset, press the (+) Button and the (-) Button at the same time while hearing descending beeps and a voice prompt, Goodbye. 4.2.2 Handlebar Remote To power on the device, tap the Front Button and the blue LED will appear. To power off the device, press and hold the Front Button and the Rear Button for two seconds until red LED flashes. 4.3 Pairing the Headset and the Handlebar Remote Turn on the headset and the Handlebar Remote. On the headset, press and hold the (+) Button for 10 seconds until you hear a voice prompt, Configuration menu. Keep tapping the (+) Button until you hear a voice prompt, Remote control pairing. On the Handlebar Remote, press and hold the Rear Button for 5 seconds until the LED alternates red and blue. The main unit and the Handlebar Remote will be paired shortly after. 4.4 Charging You can charge the headset and the Handlebar Remote by connecting the supplied USB power & data cable into a computers USB port or USB wall charger. You can use any standard micro-USB cable to charge the units. The charging LEDs turn red while they are charging and turn blue when they are fully charged. It takes about 2.5 hours to be completely charged. 4.5 Checking the Battery Level When the headset or the Handlebar Remote is powering on, the red LED flashes rapidly indicating the battery level. 4 flashes = High, 70~100%
3 flashes = Medium, 30~70%
2 flashes = Low, 0~30%
4.6 Volume Adjustment You can easily adjust the volume by moving the Joystick up or down. You will hear a beep when the volume reaches the maximum or minimum level. The volume is set and maintained independently at different levels for each audio source even when you reboot the headset. For example, once you set the volume for mobile phone handsfree, it will not change even if you adjust the volume for your Bluetooth MP3 music. However, if you adjust the volume during stand-by mode, it will affect volume levels of every audio source. 4.7 Sena Softwares 4.7.1 Sena Device Manager 11
| 10U The Sena Device Manager allows you to upgrade the firmware and configure the device settings directly from your PC. Using this software, you can assign speed dial presets, FM radio frequency presets and more. It is available for both Windows and Mac. For more information on downloading the Device Manager, please visit www.sena.com. 4.7.2 Sena Smartphone App The Sena Smartphone App allows you to configure device settings and read the Users Guide and the Quick Start Guide. Pair your phone with your 10U headset (please refer to section 5.1 Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo Device). Run the Sena Smartphone App and you can configure its settings directly from your smartphone. You can download the Sena Smartphone App for Android or iPhone from www.sena.com/app. 12
| 10U 5 PAIRING THE 10U WITH BLUETOOTH DEVICES Before using the 10U Bluetooth headset with any other Bluetooth devices for the first time, you will need to pair them together. You can pair the 10U with Bluetooth mobile phones, Bluetooth stereo devices such as MP3 players, or motorcycle specific Bluetooth GPS navigation, and with other Sena Bluetooth headsets. The pairing operation is required only once for each Bluetooth device. The headset remains paired with the devices and automatically reconnects to them when they are within range. You will hear a high toned single beep and a voice prompt whenever the headset reconnects to the paired device: Phone connected to a mobile phone, Media connected to a Bluetooth stereo device. 5.1 Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo Device Follow the procedure below to pair a mobile phone or a Bluetooth stereo device such as an MP3 player with your 10U. 1. Press and hold the Front Button for 5 seconds until you hear a voice prompt, Phone pairing. 2. Search for Bluetooth devices on your mobile phone. Select the Sena 10U in the list of the devices detected on the mobile phone. 3. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN. 4. The mobile phone confirms that pairing has been completed and the 10U is ready to use. You will hear a voice prompt, Your headset is paired. 5. If the pairing process is not completed within three minutes, the 10U will return to stand-by mode. Note:
1. If the Bluetooth connection between the headset and a mobile phone is disconnected, tap the Front Button to recover the Bluetooth connection immediately. 2. If the Bluetooth connection between the headset and a media player is disconnected, press the Joystick for 2 seconds to recover the Bluetooth connection and play. 5.2 Second Mobile Phone Pairing - Second Mobile Phone, GPS, and SR10 Typical Bluetooth headsets can connect with only one HFP (Hands-Free-Profile) Bluetooth device such as mobile phone, GPS, and Sena SR10, but second mobile phone pairing allows the headset to connect with two HFP devices simultaneously. So, when you already have a mobile phone connected with the 10U, you can also pair and connect a second mobile phone or other HFP devices. 1. To pair the HFP device, press and hold the Joystick for 5 seconds until the red LED flashes red rapidly and you hear voice prompt, Intercom pairing. 2. Within 2 seconds, tap the Front Button again, then the LED flashes blue rapidly and you will hear a voice prompt, Second mobile phone pairing. 3. Search for Bluetooth devices on the HFP device. Select the Sena 10U in the list of the devices detected on the HFP device. 4. Enter 0000 for the PIN. Some HFP devices may not ask for the PIN. 5. The HFP device confirms that the pairing is completed and the 10U is ready to use. You will hear a voice prompt, 13 Your headset is paired. Note:
| 10U
- If the GPS is also your preferred Bluetooth stereo music source, you can pair the GPS to the 10U by following the simple procedure in section 5.1, Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo Device.
- You have to use a motorcycle specific GPS, which transmits turn-by-turn voice instructions to the headset by Bluetooth. Most automotive GPS systems do not have this feature.
- The Sena SR10 is a Bluetooth two-way radio adapter for group communication, and uses Hands-Free Profile. The incoming audio from the two-way radio via SR10 is heard in the background while having an intercom conversation or a mobile phone call.
- The GPS navigation or a radar detector could be connected to the SR10 by wire. The GPS voice instruction or the radar detector alarm is also heard in the background via SR10 while having an intercom conversation or a phone call. Please refer to the SR10 Users Guide for details. 5.3 Advanced Selective Pairing: A2DP Stereo or Handsfree When you are using a smartphone, sometimes you may need to selectively use the 10U for A2DP stereo music only or for mobile phone handsfree only. These instructions are for advanced users who want to pair the 10U to their smartphones with only one selective profile: A2DP for stereo music of HFP for phone calls. If you have previously paired a mobile phone to the 10U, you must clear the previous pairing list on both devices: the mobile phone and the 10U. To clear the pairing list on the 10U, please do a factory reset or following the pairing list clearing procedure described in section 13.9, Factory Reset or 13.8, Delete All Bluetooth Pairing Information. To clear the pairing list on the mobile phone, please refer to the mobile phone manual. For most smartphones, delete the Sena 10U from the list of Bluetooth devices in the settings menu. 5.3.1 A2DP Stereo Music Only 1. Turn on the headset and press the Front Button for 5 seconds until the LED flashes red and blue alternately and you hear multiple beeps. 2. Within 2 seconds, press the Joystick for 1 second again, then the LED flashes red and you hear Media selective pairing. 3. Search for Bluetooth devices on your smartphone. Select the Sena 10U in the list of devices detected on your phone. 4. Enter 0000 for the PIN. Some mobile phones may not ask for PIN. 5.3.2 HFP for Phone Call Only 1. Turn on the headset and press the Front Button for 5 seconds until the LED flashes red and blue alternately and you hear multiple beeps. 2. Within 2 seconds, tap the Front Button again, then the LED flashes blue and you hear Phone selective pairing. 3. Search for Bluetooth devices on your smartphone. Select the Sena 10U in the list of devices detected on your phone. 4. Enter 0000 for the PIN. Some mobile phones may not ask for PIN. 14 5.4 Intercom Pairing
| 10U 5.4.1 Pairing with Other 10U Headsets for Intercom Conversation The 10U can be paired with up to three other headsets for Bluetooth intercom conversation. 1. Turn on the two 10U headsets (A and B) that you would like to pair with each other. 2. Press and hold the Joystick of the headset A and B for 5 seconds until red LEDs of the both units start to flash rapidly. You will hear a voice prompt, Intercom pairing. 3. Press the Joystick for 1 second of any one of the two headsets A and B, and wait unit the LEDs of both headsets turn to blue and intercom connection is automatically established. The two 10U headsets A and B are paired with each other for intercom conversation. If the pairing process is not completed within one minute, the 10U will return to stand-by mode. Pairing A & B 4. You can make other pairing between headsets A and C, and between headsets A and D by following the same procedure as above. 5. The intercom pairing queue is Last-Come, First-Served. If a headset has multiple paired headsets for intercom conversations, the last paired headset is set as first intercom friend. The previous intercom friend becomes second intercom friend, and third intercom friend. Note:
For example, after the pairing procedures listed above, headset D is the first intercom friend of headset A. Headset C is the second intercom friend of headset A, and headset B is the third intercom friend of headset A. 5.4.2 Pairing with Other Sena Headset Models for Intercom Conversation The 10U can be paired with all other Sena headset models such as the 20S, SMH10 and the SMH5 for intercom conversation. Please follow the same procedure as above to pair with these headset models. Note:
The SMH5 cannot participate in three-way or four-way conference intercom with the 10U. The SMH5 has a limited capability of having two-way intercom with other Sena headsets. 15 6 MOBILE PHONE, GPS, SR10 6.1 Mobile Phone Call Making and Answering
| 10U 1. When you have an incoming call, simply tap the Front Button or press the Joystick for 1 second to answer the call. 2. You can also answer the incoming call by loudly speaking any word of your choice if Voice Activated Phone Answering
(VOX Phone) is enabled, unless you are connected to intercom. 3. To end a call, tap the Front Button or press the Joystick for 2 seconds until you hear a beep, or wait for the called person to end the call. 4. To reject a call, press the Joystick for 2 seconds until you hear a beep while the phone is ringing. 5. To transfer a call between the mobile phone and the headset during the phone conversation, press the Front Button for 2 seconds until you hear a beep. 6. There are several ways to make a phone call:
- Enter numbers on your mobile phones keypad and make a call. Then the call is automatically transferred to the headset.
- For some older mobile phones, which do not automatically transfer calls to the headset, press the Front Button after entering phone numbers on the mobile phone keypad.
- Tap the Front Button in stand-by mode to activate the voice dialer of your mobile phone. For this, the voice dialing function must be available on the mobile phone. Refer to your mobile phone manual for further instruction. Note:
- If you have two phones connected to your headset and you have an incoming call from the second phone during the call of the first phone, then you may still receive the call from the second phone. In this case, the call from the first phone is on waiting mode. If you end a call, then it will automatically guide you to the first phone call.
- If you have a mobile phone and a GPS connected to your headset, you may not be able to listen to the GPS voice instruction during the phone call. 6.2 Speed Dialing You can quickly make a phone call by using the voice speed dial menu. 1. To enter into the voice speed dial menu, double tap the Front Button and you will hear a mid-toned single beep and a voice prompt, Speed dial. 2. Move the Joystick up or down navigate between the menus. You will hear prompts for each menu item. 3. Tap the Front Button to select a voice menu among the followings:
(1) Last number redial
(2) Speed dial 1
(3) Speed dial 2
(4) Speed dial 3
(5) Cancel 16
| 10U 4. After selecting the last number redial menu, you will hear a voice prompt, Last number redial. Then, to redial the last phone call number, tap the Front Button. 5. To call one of the speed dials, move the Joystick up or down to navigate between the menus until you hear a voice prompt, Speed dial (#). Then, tap the Front Button. 6. If you want to exit the speed dial immediately, move the Joystick up or down until you hear voice prompt, Cancel, and tap the Front Button or press the Joystick for 1 second. If you do not press any button within 15 seconds, the 10U will exit the voice speed dial menu and go back to stand-by mode. Note:
- Make sure that you connect the mobile phone and the headset to use the speed dial function.
- You need to assign speed dial numbers before using the speed dial (please refer to section 13.1, Assigning Speed Dial). Answer End Reject Tap Front Button or Press Joystick for 1 or Say Hello Tap Front Button or Press Joystick for 2 Press Joystick for 2 Transfer Press Front Button for 2 Call Use phone keypad Speed Dial Double tap Front Button Voice Dial Tap Front Button Mobile Phone Call Button Operations 6.3 GPS Navigation If you pair a Bluetooth GPS to the 10U as described in section 5.2, Second Mobile Phone Pairing, you can listen to GPS instructions wirelessly. Push the Joystick up or down to adjust volume. The GPS voice instruction interrupts intercom conversation but it is automatically reestablished after the GPS voice instruction ends. 6.4 Sena SR10, Two-Way Radio Adapter You can use a two-way radio and the 10U Bluetooth intercom simultaneously by using the Sena SR10, a Bluetooth Two-
way Radio Adapter (please refer to section 5.2, Second Mobile Phone Pairing). Incoming audio from the two-way radio will not interrupt an intercom conversation but is heard in the background. This is useful when you have an intercom conversation with a passenger on the back seat and use a two-way radio for group communication with other motorcycle riders. 17 7 STEREO MUSIC 7.1 Bluetooth Stereo Music
| 10U The Bluetooth audio device must be paired with the 10U by following the Bluetooth Stereo Device Pairing procedures described in the section 7.1. The 10U supports the audio/Video Remote Control Profile (AVRCP), so if your Bluetooth audio device also supports the AVRCP, you can use the 10U to remotely control music playback. Not only can you adjust the volume but you can also use functions such as play, pause, next track and previous track. 1. To play or pause music, press the Joystick for 1 second until you hear a double beep. 2. To adjust the volume, move the Joystick up or down. 3. To track forward or track back, move and hold the Joystick for 1 second left or right. 7.2 Music Sharing You can start sharing music with an intercom friend using Bluetooth stereo music during a two-way intercom conversation
(please refer to section 8.1, Two-way Intercom). When you terminate music sharing, you can go back to the intercom conversation. To start or terminate sharing music, press the Joystick for 1 second during an intercom conversation until you hear a double beep. To track forward or track back, move the Joystick left or right. Note:
- Both you and your intercom friend can remotely control music playback such as track forward and track back.
- Music sharing will be paused when you are using your mobile phone or listening to GPS instructions. 18 8 INTERCOM
| 10U Please make sure your intercom devices are paired as described in section 5.4, Intercom Pairing. 8.1 Two-way Intercom 8.1.1 Starting Two-way Intercom You can start an intercom conversation with one of any intercom friends by pressing the Joystick for 1 second: Press the Joystick for 1 second once to intercom with the first intercom friend, press the Joystick for 1 second twice to intercom with the second intercom friend, and Press the Joystick for 1 second three times to intercom with the third intercom friend. 8.1.2 Ending Two-way Intercom To terminate an intercom conversation, press the Joystick for 1 second. Any intercom connection with any intercom friend will be terminated by a 1 second press. Pressing the Joystick for 1 second twice or three times will do nothing in this case. 8.2 Three-way Intercom 8.2.1 Starting Three-way Intercom You (A) can have a three-way conference intercom with two other 10U friends (B & C) by establishing two intercom connections simultaneously. While a three-way conference intercom is in progress, mobile phone connection of all three participants is temporarily disconnected. However, as soon as the conference intercom terminates or one of the participants leaves the intercom, all mobile phones automatically reconnect to their headsets. If you have an incoming mobile phone call during the conference intercom, terminate the conference intercom to automatically reconnect and receive the phone call. 1. You (A) need to be paired with two other friends (B & C) for three-way conference intercom. 2. Start an intercom conversation with one of the two friends in your intercom group. For example, you (A) may start an intercom conversation with the intercom friend (B). Or intercom friend (B) may start an intercom call with you (A). 3. The second intercom friend (C) may join the intercom by making an intercom call to you (A). 19
| 10U 4. Now you (A) and two 10U intercom friends (B & C) are having a three-way conference intercom. 8.2.2 Ending Three-way Intercom You can completely terminate the conference intercom or just disconnect an intercom connection with one of your active intercom friends. 1. Press the Joystick for 2 seconds until you hear a beep to terminate three-way conference intercom completely. It terminates both intercom connections with (B) and (C). 2. Press the Joystick for 1 second once or twice to disconnect intercom connection with one of the two intercom friends accordingly. For example, by pressing the Joystick for 1 second once, you can terminate the intercom connection with just the first intercom friend (B). However, you still have the intercom connection with your second intercom friend (C). Joystick Operation Result Press for 2 Disconnect (B) & (C) Press for 1 once Disconnect (B) Press for 1 twice Disconnect (C) End Three-way Intercom 8.3 Four-way Intercom 8.3.1 Starting Four-way Intercom You can have four-way conference intercom with three other 10U users by adding one more intercom participant to the three-way intercom. While you are having a three-way intercom as above in section 8.2, a new participant (D), who is an intercom friend of your intercom friend (C), may join the conference intercom by making an intercom call to your intercom friend (C). Please note that in this case, the new participant (D) is an intercom friend of (C), not of you (A). 8.3.2 Ending Four-way Intercom As same in the case of three-way intercom, you can completely get out of the four-way conference intercom or just disconnect a single intercom connection. 20
| 10U 1. Press the Joystick for 2 seconds until you hear a beep to terminate four-way conference intercom. It terminates the intercom connections between you (A), and your intercom friends (B) and (C). 2. Press the Joystick once or twice to disconnect the intercom connection with one of the two intercom friends accordingly. However, when you disconnect the second friend (C) by double tapping the Joystick, you will be disconnected with the third participant (D) as well. This is because the third participant (D) is connected with you via the second friend (C). Joystick Operation Result Press for 2 Disconnect (B), (C) & (D) Press for 1 once Disconnect (B) Press for 1 twice Disconnect (C) & (D) End Four-way Intercom 21
| 10U 9 THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT 1. When you have an incoming mobile phone call during an intercom conversation, you will hear a ring tone. You can choose whether to 1) answer the mobile phone call and stop the intercom conversation, or 2) reject the phone call and stay on the intercom conversation. a. To answer the phone call and stop the intercom conversation, press the Joystick for 1 second or the Front Button. The VOX Phone feature does not work if you are connected to intercom. When you hang up the phone call, the intercom will automatically be recovered. b. To reject the phone call and stay on the intercom conversation, press the Joystick for 2 seconds until you hear a beep. Unlike other motorcycle Bluetooth headsets, this prevents a user from being dropped out of an intercom conversation by an incoming mobile call. 2. When you have an incoming intercom call during a mobile phone call, you will hear 4 high toned beeps, alerting you that there is an incoming intercom call. You will also hear a voice prompt, Intercom requested. In this case, the intercom call does not override the mobile call because intercom has lower priority than mobile call. You have to hang up the mobile phone call to make or receive an intercom call. 3. You can have a three-way conference phone call by adding an intercom friend to the mobile phone conversation. During a mobile phone conversation, press the Joystick for 1 second to invite one of the intercom friends to the mobile phone line. To disconnect the intercom first and go back to your private mobile phone call, terminate the intercom by pressing the Joystick for 1 second. To end the mobile phone call first and maintain the intercom conversation, press the Joystick for 2 seconds, or tap the Front Button, or wait for the person on the mobile phone line to end the call. Start Press the Joystick for 1 second while having a mobile phone call End intercom first Press the Joystick for 1 second End phone call first Press Joystick for 2 or Tap Front Button or Wait for the called person to end the call Start & End Three-way Conference Phone Call 22
| 10U 10 UNIVERSAL INTERCOM You can have an intercom conversation with non-Sena Bluetooth headsets using the Universal Intercom function. Non-
Sena Bluetooth headsets can be connected to the Sena Bluetooth headset if they support the Bluetooth Hands-Free Profile (HFP). The working distance may differ depending on the performance of Bluetooth headset that it is connected to. In general, it is shorter than normal intercom distance since it uses the Bluetooth Hands-Free Profile. The Universal Intercom affects both the phone call connection and the multipoint connection (mostly used for GPS connections for riders). You cannot use a multipoint connection device while you are using the Universal Intercom in case as below. 1. If a non-Sena headset does not support a multipoint connection, it cannot use a phone call connection while using the Universal Intercom. 2. As for Sena headsets, the Universal Intercom affects the multipoint connection. 3. If non-Sena headset (already paired as Universal Intercom with Sena) is turned on, then the multipoint connection is automatically deactivated. And the non-Sena headset is automatically connected to Sena headset as a Universal Intercom. So you cannot use multipoint connection device such as GPS, while a non-Sena headset is turned on. 4. Even though you disconnect the non-Sena headset as a Universal Intercom, it will not automatically restore the multipoint connection. To restore the multipoint connection, you should turn off the non-Sena headset first, then try to connect to multipoint device manually from the device screen or simply reboot the device so that it automatically connects to the Sena headset. 10.1 Universal Intercom Pairing The 10U can be paired with non-Sena Bluetooth headsets for Bluetooth intercom conversation. You can pair the 10U with only one non-Sena Bluetooth headset so if you pair with a different non-Sena Bluetooth headset, the previous pairing will be removed. 1. Turn on the 10U and a non-Sena Bluetooth headset that you want to pair with. 2. Press and hold the Joystick on the 10U for 8 seconds until the blue LED flashes rapidly. You will hear a voice prompt, Universal intercom pairing. 3. Perform the operation required for handsfree pairing on the non-Sena Bluetooth headset (refer to the Users Manual of the headsets you want to use). The 10U will automatically pair with non-Sena Bluetooth headsets in pairing mode. 10.2 Two-way Universal Intercom You can initiate the Universal Intercom connection with non-Sena Bluetooth headsets using the same intercom connection method as you would between other Sena headsets. You may press the Joystick for 1 second to begin an intercom conversation with the first intercom friend, double tap with the second intercom friend, and triple tap with the third intercom friend. Non-Sena Bluetooth headsets may initiate the Universal Intercom connection, activating the voice dialing or using the redialing operation. You may also disconnect the existing connection by ending a call operation function (refer to the Users Guide of the headsets for voice dialing, redialing, and ending a call). 23
| 10U 10.3 Three-way Universal Intercom You may make a three-way Universal Intercom connection with two 10Us and one non-Sena Bluetooth headset. If the intercom connection is made, all headsets connected cannot use the mobile phone call function since the connection between the headset and the phone is disconnected temporarily. If you disconnect the intercom call, the mobile phone connection is made again automatically so that you can use a mobile phone call function. 1. You (A) need to be paired with a non-Sena Bluetooth headset (B) and another 10U headset (C) for the three-way conference intercom. 2. Start an intercom conversation with non-Sena Bluetooth headset (B) in your intercom group. For example, you (A) may start an intercom conversation with non-Sena Bluetooth headset (B). The non-Sena Bluetooth headset (B) may also start an intercom call with you (A). 3. The Other 10U (C) may join the intercom by making an intercom call to you (A). 4. Now you (A), non-Sena Bluetooth headset (B), and the other 10U (C) are having a three-way conference intercom. 24
| 10U 5. You may disconnect three-way Universal Intercom using the same way as you do in normal three-way intercom. Please refer to section 7.2.2, End Three-way Intercom. 10.4 Four-way Universal Intercom You may make a four-way Universal Intercom connection with a couple of different configurations, 1) three 10Us and one none-Sena Bluetooth headset or 2) two 10Us and two non-Sena Bluetooth headsets. You may have a couple of other Four-way Universal Intercom configurations, 1) your headset (A), a non-Sena Bluetooth headset (B), another 10U (C), and a non-Sena Bluetooth headset (D), 2) your headset (A), a non-Sena Bluetooth headset
(B), and two other 10U headsets (C and D). You may make the four-way Universal Intercom call the same way as a normal four-way intercom call. 10.4.1 Four-way Universal Intercom Case 1 Two 10U headsets (A and C) and two non-Sena Bluetooth headsets (B and D). 1. You (A) may start an intercom conversation with the non-Sena Bluetooth headset (B). 2. The other 10U (C) may join the intercom by making an intercom call to you (A). 3. The non-Sena Bluetooth headset (D) may join the conference intercom by making an intercom call to the 10U (C). 25
| 10U 4. Now two 10U headsets (A & C) and two non-Sena Bluetooth headsets (B & D) are connected with the four-way Universal Intercom. You may disconnect a four-way Universal Intercom using the same way as you do in a normal four-way intercom. Please refer to section 7.3.2, End Four-way Intercom. 10.4.2 Four-way Universal Intercom Case 2 Three 10U headsets (A, C and D) and one non-Sena Bluetooth headset (B) The procedure is the same as case 1 described in section 11.4.1. 26 11 FM RADIO 11.1 FM Radio On/Off
| 10U To turn on the FM radio, press the Front Button for 2 seconds until you hear a mid-toned double beep sound. You will then hear a voice prompt, FM on. To turn off the FM radio, press the Front Button for 2 seconds until you hear a voice prompt, FM off. When you power it off, the 10U will remember the last station frequency. When you power it on, the last station frequency will be playing. 11.2 Preset Stations You can listen to preset stations while listening to the FM radio. Tap the Front Button once to go upward to your next saved preset station. 11.3 Seek and Save Seek is the function that searches for station to station frequencies. To use the Seek function, please follow the procedure below:
1. Move and hold the Joystick left or right for 1 second to search down or up the station dial. 2. If the tuner finds a station while searching frequencies, it stops the seek function. 3. To save the current station, press and hold the Joystick for 2 seconds until you hear a voice prompt, Preset (#). 4. Move the Joystick up or down in order to select which preset number you want for that specific station. You can save up to 10 preset stations. (You may cancel the preset operation by waiting approximately 10 seconds. You will then hear Save preset cancelled. You can also move the Joystick up or down until you hear Cancel. Press the Joystick for 1 second to confirm cancellation. You will then hear Save preset cancelled). 5. To save the current station, press the Joystick for 1 second again. You will then hear a voice prompt, Save preset (#). 6. To delete the saved station in the preset number, tap the Front Button. You will then hear a voice prompt, Delete preset (#). Note:
1. You can save FM stations to presets before using FM radio. Connect the 10U to your PC and open the Sena Device Manager. It allows you to save up to 10 FM station frequency presets on the 10U settings menu. You may do the same operation by using the Sena Smartphone App. 2. You can still answer an incoming phone call and intercom while listening to the FM radio. 11.4 Scan and Save Scan is the function that automatically searches station frequencies, starting from the current frequency and up. To use the scan function, please follow the procedures below:
1. Double tap the Front Button. Then the current station frequency moves upward to find other station frequencies. 2. If the tuner finds a station, it stays at the station frequency for 8 seconds, then scanning to the next station frequency. 3. Scan function stops when you double tap the Front Button again. 27
| 10U 4. To save a station while scanning frequencies, tap the Front Button when at that station. You will hear a voice prompt from the 10U, Save preset (#). The station will be saved as the next preset number. 5. All stations preset during Scan, will overwrite previously set stations. 11.5 Temporary Preset With the temporary preset function, you may temporarily preset stations automatically without changing the existing preset stations. Tap the Front Button three times to automatically scan for 10 temporary preset stations. The temporary preset stations will be cleared when the system is powered off. 11.6 Region Selection You can select the proper FM frequency region from the Sena Device Manager. With the region setting, you may optimize the seek function to avoid unnecessary frequency ranges (Factory default: worldwide). Region Frequency range Step Worldwide 76.0 ~ 108.0 MHz 100 kHz Americas 87.5 ~ 107.9 MHz 200 kHz Asia 87.5 ~ 108.0 MHz 100 kHz Australia 87.5 ~ 107.9 MHz 200 kHz Europe 87.5 ~ 108.0 MHz 100 kHz Japan 76.0 ~ 90.0 MHz 100 kHz 28 12 FUNCTION PRIORITY The 10U operates in the following order of priority:
(highest)
(lowest) Mobile phone Intercom FM Radio Bluetooth stereo music
| 10U A lower priority function is always interrupted by a higher priority function. For example, stereo music is interrupted by intercom call, and an intercom conversation is interrupted by an incoming mobile phone call. 29
| 10U 13 CONFIGURATION SETTING You can set the configuration of the 10U by the voice menu instruction described below. 1. To enter into voice configuration menu, press and hold the Joystick for 12 seconds until the LED shows solid blue and you hear high toned double beeps. You will also hear a voice prompt, Configuration menu. 2. Move the Joystick up or down to navigate between the menus. You will hear voice prompts for each menu item as below. 3. You can enable the feature or execute the command by tapping the Front Button, or disable the feature by tapping the Joystick. 4. If any button is not pressed within 10 seconds, the 10U will exit the configuration and go back to stand-by mode. 5. If you want to exit the configuration immediately, move the Joystick up or down until you hear a voice prompt, Exit configuration, and tap the Front Button. The voice prompt for each menu item is as below:
(1) Speed dial
(2) VOX phone
(3) VOX intercom
(4) Voice prompt
(5) RDS AF setting
(6) Sidetone
(7) Noise control
(8) Delete all pairings
(9) Factory reset
(10) Remote Control Pairing
(11) Exit configuration 30 13.1 Assigning Speed Dial Voice Prompt
"Speed dial"
Factory Default N/A Execute Tap the Front Button
| 10U 1. To assign a phone number as a speed dial, move the Joystick up or down until you hear a voice prompt, Speed dial. 2. Tap the Front Button, and you will hear a voice prompt, Speed dial one and Phone connected.
- move the Joystick up or down to select one of three speed dial numbers by hearing voice prompts, Speed dial
(#). 3. Call a phone number you want to assign and you will hear a voice prompt, Save speed dial (#). The phone number is automatically assigned to the selected speed dial number. Then the phone call will hang up immediately. 4. To exit the menu, move the Joystick up or down until you hear a voice prompt, Cancel, and tap the Front Button to confirm. You will then hear a voice prompt Cancel. If any button is not pressed within 1 minute, the 10U will exit the configuration menu and go back to stand-by mode. Note:
- After assigning a phone number to one of three speed dials, you can continually assign another phone number to the reset of two speed dials.
- You can also assign phone numbers for speed dialing by using the Sena Device Manager software or the Sena Smartphone App. Please visit the Sena Bluetooth website at www.sena.com for more information. 13.2 Enabling/Disabling Voice Activated Phone Answering Voice Prompt VOX phone Factory Default Enable Enable Disable Tap the Front Button Press the Joystick for 1 second If this feature is enabled, you can answer incoming calls by voice. When you hear a ringtone for an incoming call, you can answer the phone by saying a word such as Hello loudly or by blowing air into the microphone. VOX Phone is temporarily disabled if you are connected to intercom. If this feature is disabled, you have to press the Joystick for 1 second or the Front Button to answer an incoming call. 31 13.3 Enabling/Disabling Voice Activated Intercom Voice Prompt VOX intercom Factory Default Disable Enable Disable Tap the Front Button Press the Joystick for 1 second
| 10U If this feature is enabled, you can initiate an intercom conversation with the last connected intercom friend by voice. When you want to start intercom, say a word such as Hello loudly or blow air into the microphone. If you start an intercom conversation by voice, the intercom terminates automatically when you and your intercom friend remain silent for 20 seconds. However, if you manually start an intercom conversation by pressing the Joystick for 1 second, you have to terminate the intercom conversation manually. However, if you start intercom by voice and end it manually by pressing the Joystick for 1 second, you will not be able to start intercom by voice temporarily. In this case, you have to press the Joystick for 1 second to restart the intercom. This is to prevent repeated unintentional intercom connections by strong wind noise. After rebooting the 10U, you can start intercom by voice again. 13.4 Enabling/Disabling Voice Prompts Voice Prompt Voice prompt Factory Default Enable Enable Disable Tap the Front Button Press the Joystick for 1 second You can disable voice prompts by configuration setting, but the following voice prompts are always on.
- Voice prompts for configuration setting menu
- Voice prompts for battery level indicator
- Voice prompts for factory reset
- Voice prompts for speed dial
- Voice prompts for FM radio functions 13.5 Enabling/Disabling RDS AF Voice Prompt RDS AF setting 32 Factory Default Disable Enable Disable Tap the Front Button Press the Joystick for 1 second
| 10U RDS AF allows a receiver to re-tune to the second frequency location when the first signal becomes too weak. With RDS AF enabled on the receiver, a radio station with more than one frequency can be used. 13.6 Enabling/Disabling Sidetone Voice Prompt Sidetone Factory Default Disable Enable Disable Tap the Front Button Press the Joystick for 1 second Sidetone is audible feedback of your own voice. It helps you to naturally speak at the correct level according to varying helmet noise conditions. If this feature is enabled, you can hear what you are speaking during an intercom conversation or a phone call. 13.7 Enabling/Disabling Advanced Noise Control Voice Prompt
"Noise control"
Factory Default Enable Enable Tap the Front Button Disable Press the Joystick for 1 second When Advanced Noise Control is enabled, the background noise is reduced during an intercom conversation. When it is disabled, the background noise is mixed with your voice during intercom. Note:
If you use your 10U with the Bluetooth Audio Pack for GoPro, you can enable or disable this feature only during Normal Audio Recording Mode. This feature is automatically disabled while in Ultra HD (UHD) Audio Mode. 13.8 Delete All Bluetooth Pairing Information 33 Voice Prompt Delete all pairings Factory Default N/A Execute Tap the Front Button
| 10U To delete all Bluetooth pairing information of the 10U, move the Joystick up or down until you hear a voice prompt, Delete all pairings, and tap the Front Button to confirm. 13.9 Factory Reset Voice Prompt Factory reset Factory Default N/A Execute Tap the Front Button To restore factory default settings on the 10U, move the Joystick up or down until you hear a voice prompt, Factory reset, and tap the Front Button to confirm. 13.10 Remote Control Pairing Voice Prompt Remote control pairing Factory Default N/A To enter into Remote Control Pairing mode, press the (+) Button until you hear a voice prompt, Remote control pairing. Please refer to section 4.3, Pairing the Headset with the Handlebar Remote for more information. Press the (+) Button once more to exit from the pairing mode. Note:
You can only enter the Remote Control Pairing mode using the control buttons on the headset. 13.11 Exit Voice Configuration Menu Voice Prompt Exit configuration Factory Default N/A 34
| 10U Execute Tap the Front Button To exit voice configuration menu and get back to stand-by mode, move the Joystick up or down until you hear a voice prompt, Exit configuration, and tap the Front Button to confirm. Move Joystick Up/Down Tap Front Button Press Joystick for 1 Speed Dial Execute VOX Phone VOX Intercom Voice Prompt RDS AF Setting Sidetone Enable Enable Enable Enable Enable Advanced Noise Control Enable Delete All Pairings Execute Factory Reset Execute Remote Control Pairing N/A Exit Configuration Execute sec N/A Disable Disable Disable Disable Disable Disable N/A N/A N/A N/A Voice Configuration Menu & Button Operations 35 14 FIRMWARE UPGRADE
| 10U The 10U supports firmware upgrades. You can update the firmware using the Sena Device Manager (please refer to section 4.7.1, Sena Device Manager). Please visit Sena Bluetooth website at www.sena.com to check the latest software downloads. 36 15 TROUBLESHOOTING 15.1 Intercom Failure
| 10U When you try to start an intercom conversation with an intercom friend who is unavailable within range or already having a conference intercom with other riders or a mobile phone call, you will hear a low tone double beep signifying an intercom busy signal. In this case, you have to try again later. 15.2 Intercom Reconnection If your intercom friend goes out of range while having an intercom conversation, you may hear static noise and eventually the intercom will be disconnected. In this case, the 10U automatically tries to reconnect the intercom every 8 seconds and you will hear high tone double beeps until the intercom is reestablished. If you do not want to make a reconnection, press the Joystick for 1 second to stop the attempt. 15.3 Fault Reset When the 10U is not working properly or is in faulty status for any reason, you may reset by pushing the pin-hole reset button at the front of the left speaker. Insert a paper clip into the reset pin-hole and press the reset button for a second with light pressure. The 10U will be switched off. Restart the system and try again. This will not restore the headset to factory default settings. 15.4 Factory Reset 1. To restore the 10U to factory default settings, press and hold the Front Button for 12 seconds until the LED shows solid red and you hear Factory reset. 2. Within 5 seconds, press the Joystick for 1 second to confirm reset. The headset will be restored to factory setting and switched off automatically. You will hear Headset reset, good-bye. 3. If you press the Front Button or leave the Joystick for 10 seconds, the reset attempt is cancelled and the headset returns to stand-by mode. You will hear a voice prompt, Cancelled. 37 17 OPERATION QUICK REFERENCE 17.1 Using the Handlebar Remote
| 10U Type Function Button Command LED Beep Handlebar Remote Power on Tap the Front Button Solid blue Power off Press the Front Button and the Rear Button for 2 seconds Flash red Factory Reset Press the Front Button, the Rear Button, and the Joystick for 1 second Solid red Basic Function Volume adjustment Move the Joystick up or down
-
-
-
-
-
Mobile phone pairing Press the Front Button for 5 seconds Blue & red alternatively flashing High tone multiple beeps Press the Joystick for 5 seconds Red flashing Multiple beeps Second mobile phone pairing Tap the Front Button within 2 seconds Mobile Phone Call transfer Press the Front Button for 2 seconds Answer & end phone call Tap the Front Button or press the Joystick for 1 second Voice dial Tap the Front Button Speed dial Double Tap the Front Button Reject incoming call Press the Joystick for 2 seconds
-
-
-
-
-
Intercom Press the Joystick for 5 seconds Red flashing High tone single beep
-
-
Mid-tone single beep
-
Mid-tone single beep Intercom pairing Start / End each intercom Press the Joystick for 1 second of any one of the two headsets Press the Joystick for 1 second
-
-
End all intercoms Press the Joystick for 2 seconds Blue flashing Mid-tone double beeps 38 Music Play/Pause Bluetooth music Press the Joystick for 2 seconds
-
Mid-tone double beep Track forward/back Move and hold the Joystick left or
-
-
| 10U FM radio FM radio on right for 1 second Press the Front Button for 2 seconds FM radio off Press the Front Button for 2 seconds Select preset Tap the Front Button Seek stations Move the Joystick left and right for 1 second Scan up FM band Double tap the Front Button Stop scanning Double tap the Front Button Save preset while scanning Tap the Front Button
-
-
-
-
-
-
-
Mid-tone double beeps Mid-tone double beeps Mid-tone single beep High tone triple beeps High tone double beeps High tone double beeps 17.2 Using the Headset Buttons Type Function Button Command LED Beep Basic Function Power on (headset) Press the (+) Button and the (-) Button for 1 second Solid blue Ascending beeps Power off (headset) Press the (+) Button and the (-) Button Solid red Descending beeps Volume adjustment Press the (+) Button or the (-) Button
-
-
Mobile phone pairing Mobile Phone Second phone pairing mobile Press seconds the Press seconds the
(-) Button for 10 red Blue &
alternatively flashing High tone multiple beeps
(-) Button for 10 Red flashing Multiple beeps Tap the (+) Button Answer & end phone call Tap the (+) Button
-
Voice dial Press the (+) Button for 3 seconds
-
-
-
39 Speed dial Press the (-) Button for 3 seconds
-
| 10U Mid-tone beep single Reject incoming call Press the (-) Button for 2 seconds
-
-
Intercom Press the (-) Button for 5 seconds Red flashing Intercom pairing Tap the (-) Button Press the (-) Button for 5 seconds Red flashing Universal pairing intercom Tap the (+) Button End all intercoms Press the (-) Button for 1 second Blue flashing Music Play/Pause Bluetooth music Press the (+) Button for 1 second
-
Track forward/back Press the (+) Button or the (-) Button for 2 seconds FM radio FM radio on Press the (+) Button for 5 seconds FM radio off Select preset Press the (+) Button for 5 seconds Press the (+) Button for 1 second Seek stations Press the (+) Button or the (-) Button for 3 seconds Scan up FM band Press the (-) Button for 5 seconds Stop scanning Press the (-) Button for 5 seconds Save preset while scanning Press the (+) Button for 1 second Configuration Enter configuration settings mode into Press seconds the
(+) Button for 10 Reset Fault reset Press the Reset Button
-
-
-
-
-
-
-
-
-
-
Mid-tone beep single Mid-tone beep single Mid-tone beeps Mid-tone beep
-
Mid-tone beeps Mid-tone beeps Mid-tone beep double double double double single tone triple High beeps High tone double beeps High tone double beeps High tone double beeps
-
40
| 10U CERTIFICATION AND SAFETY APPROVALS FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and the receiver Reorient or relocate the receiving antennae Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC RF Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. FCC Caution Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void users authority to operate the equipment. CE Declaration of Conformity This product is CE marked according to the provisions of the R&TTE Directive (99/5/EC). Hereby, Sena declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For further information, please consult www.sena.com. Please note that this product uses radio frequency bands not harmonized within EU. Within the EU this product is intended to be used in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden, United Kingdom and within EFTA in Iceland, Norway and Switzerland. Industry Canada Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. 41 Bluetooth License
| 10U The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. Other trademarks and trade names are those of their respective owners. The product is compliant with and adopts the Bluetooth Specification 3.0 and has successfully passed all interoperability tests that are specified in the Bluetooth specification. However, interoperability between the device and other Bluetooth -
enabled products is not guaranteed. WEEE (Waste Electrical and Electronic Equipment) The crossed-out wheel bin symbol on the product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies to the European Union and other locations where separate collection systems are available. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please do not dispose of these products as unsorted municipal waste, but hand for recycling. in at an official collection point it SAFETY INFORMATION Please ensure that the product is properly used by observing the warnings and cautions below to prevent any risk and/or damage to property. Product Storage and Management Keep the product free of dust. It may damage mechanical and electronic parts of the product. Do not store the product in high temperatures as this may reduce the life span of electronic devices, damage the battery, and/or melt plastic parts of the product. Do not store the product in cold temperatures. Abrupt changes in temperatures may cause condensation and damage electronic circuits. Do not clean the product with cleaning solvents, toxic chemicals, or strong detergents as this may damage the product. Do not paint the product. Paint may obstruct moving parts or interfere with the normal operation of the product. Do not drop or otherwise shock the product. It may damage the product or its internal electronic circuits. Do not disassemble, repair or modify the product as this may damage the product and invalidate the product warranty. Product Use 42
| 10U In some regions, it is prohibited by law to ride motorcycles or bicycles while wearing headsets. Therefore be certain to comply with all relevant laws in the region before using the product. Use of the product at a high volume for a long period of time may damage your eardrums or hearing ability. Keep the volume at a modest level. Do not cause impact to the product or touch it with sharp tools as this may damage the product. Do not use the product in high-temperatures or apply heat to the product as this may cause damage, explosion, or fire. Keep the product dry and away from water. It may damage the product. Keep product away from pets or small children. It may damage the product or cause accidents. Do not use the product near a microwave oven or a wireless LAN device as this may cause malfunction or interference with the product. In any place where wireless communication is prohibited, such as hospitals or airplanes, turn off the power and refrain from using the product. In a place where wireless communication is prohibited, electromagnetic waves may cause hazards or accidents. Do not use the product near hazardous explosives. When there are near any explosion hazards, turn off the power and heed any regulations, instructions, and signs in the area. When using the product, drive at a low speed (slower than 35km/h) for safety. In addition, be certain to conform to laws regarding the use of communications devices while driving. Do not put the product where it may hamper the driver's vision or manipulate it while driving. This may cause traffic accidents. Before driving, fasten the product to the helmet, and double-check that it is fastened. Separation of the product while driving may cause damage to the product or accidents. If the product is damaged, stop using it immediately. It may cause damage, explosion, or fire. Battery This product has an irreplaceable rechargeable battery inside. Therefore, when using the product, make sure to adhere to the following:
Never separate the battery from the product as this may damage the product. The battery performance may be reduced over time with usage. In recharging the battery, make sure to use an approved charger provided by the manufacturer. Use of a non-
approved charger may cause fire, explosion, leakage, and other hazards may also reduce the life time or performance of the battery. Store the battery at temperatures of 15C~25C (59F~77F). Higher or lower temperatures may reduce the capacity and life of the battery, or may cause temporary non-operation. Do not use the product in sub-zero temperature, because it may cause serious reduction of the battery performance. If you apply heat to the battery or throw it into fire, it may explode. Do not use the product with a damaged battery. It may explode and/or cause accidents. Never use a damaged charger. It may explode and/or cause accidents. Battery life may vary depending on conditions, environmental factors, functions of the product in use, and devices used with it. PRODUCT WARRANTY AND DISCLAIMER Limited Warranty Limited Warranty Sena Technologies, Inc. (Sena) guarantees the product quality based on the technical specification stated in the product manual, and data regarding product warranty. Here, product warranty extends to the product only. Sena will not be liable for any loss, damage of human life, or loss of property which may result from using the product beyond defective parts or flaws that occur due to problems in manufacture. 43
| 10U Warranty Period Sena guarantees free-of-charge replacements of defective parts of the product or flaws that may have occurred due to problems in manufacture for a period of 2 years from the date of initial purchase. Termination Quality warranty of the product becomes effective on the date of initial purchase. In addition, the quality warranty of the product expires when the warranty period expires. However, in the following cases, the warranty will be terminated prematurely. In the event the product has been sold or transferred to a third party. In the event the manufacturer's name, serial number, product label, or other markings have been modified or removed. In the event any unauthorized person has tried to disassemble, repair, or modify the product. Notice and Waiver By buying and using this product, you relinquish considerable legal rights including any claim for compensation for damages. Therefore, be certain to read and understand the following terms and conditions before using the product. Use of this product will constitute consent to this agreement, and forfeiture of rights to all claims. If you do not consent to all the terms and conditions of this agreement, return the product for a refund. (Refer to the section "Return for Full Refund".) 1. You agree that you, your descendants, legal proxies, successors, or transferees will not raise permanent volitional request for any suit, claim, implementation, redemption or similar action from Sena with regard to any occasion such as difficulty, pain, suffering, inconvenience, loss, injury, or death which may occur to you or a third party during the use of this product. 2. You must completely understand and accept all risks (including those occurring due to any careless behavior of yours or others) which may occur during the use of this product. 3. You are responsible for ensuring that your medical condition permits usage of the product and that you are in sufficient physical condition for using any device which can be used with it. In addition, you must ensure that the product does not limit your abilities and that you are able to use it safely. 4. You must be an adult who can take responsibilities for using the product. 5. You must read and understand the following warnings and alerts:
Sena; together with employees, managers, partners, subsidiaries, representatives, agents, supporting firms and suppliers, sole sellers of Sena (collectively referred to as "the company") recommend that, before using the product and similar devices of any brands including its derivative models, you collect any relevant information in advance and be entirely prepared in terms of weather, traffic situation, and road conditions. When you use the product while you operating any vehicle or equipment such as motorcycles, scooters, mopeds, ATVs, or quad-bikes (hereinafter called as "transportation means"), you must take complete caution regardless of the location of such operation. Use of the product on the road may cause such risks as fracture, serious disability, or death. Risk factors, which may occur when you use the product, may be due to errors of the manufacturer, its agents, or third parties which are involved in the manufacturing. Risk factors, which may occur when you use the product, may be unforeseeable. Therefore, you must take full responsibility for any damage or loss caused by all risk factors which may occur when using the product. When you use the product, use good judgment; never use it under the influence of alcohol. 6. You must read and completely understand all terms and conditions of legal rights and warnings that are involved in using the product. In addition, usage of the product constitutes acceptance of all terms and conditions regarding waiver of rights. Warranty Exclusions Reasons for Limited Liabilities If you do not return the product after purchasing it, you relinquish all rights to liabilities, loss, claims, and claims for reimbursement of expenses (including attorney's fees). Therefore, Sena will not be liable for physical injury, death, or any loss or damage of transportation means, possessions, or assets which belong to you or third parties that may have occurred while you use the product. Further, Sena will not be liable for any substantial damage not related to the, condition, environment, or malfunction of the product. All risks related with the operation of the product depend entirely on the user regardless of its use by the initial purchaser of a third party. 44
| 10U Use of this product may violate local or national laws. In addition, be aware once again that correct and safe use of the product is entirely your responsibility. Limitation of Liability TO THE FULL EXTENT ALLOWED BY LAW, SENA EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS PRODUCTS, EVEN IF SENA OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT SENAS OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. IN ANY CASE, THE TOTAL COMPENSATION LIABILITIES OF SENA OR ITS SALES AGENTS SHALL NOT EXCEED THE PRICE PAID FOR THE PRODUCT BY THE PURCHASER. Liabilities Disclaimer In addition to damages which may occur due to the use of the product, Sena will not be liable for damages of the product which occur due to the following events. In the event the product is misused or used for purposes other than its intended purposes. In the event the product is damaged because the user does not follow the content of the product manual. In the event the product is damaged because it has been left unattended or has undergone any other accident. In the event the product is damaged because the user has used any parts or software which are not provided by the manufacturer. In the event the product is damaged because the user has disassembled, repaired, or modified it in such way as is not explained in the product manual. In the event the product is damaged by a third party. In the event the product is damaged due to Acts of God (including fire, flood, earthquake, storm, hurricane or other natural disaster). In the event the surface of the product is damaged by use. Warranty Service To obtain product warranty service, send the defective product, at your expense, to the manufacturer or the seller along with proof of purchase (a receipt that shows the purchase date, a product registration certificate of the Website, and other relevant information). Take necessary measures to protect the product. In order to get a refund or replacement, you must include the whole package as it was purchased. Free-of-charge Service Sena will provide free-of-charge repair or replacement service for the product when product defects occur within the scope of the product warranty during the warranty period. Charged Service Sena will provide charged repair or replacement service for the product when the product warranty period has been expired or when the product damage is beyond the scope of the product warranty. For further information on charged service, you may contact the service center of Sena. Return for Full Refund Should you not agree to the terms and conditions explained above, you may return the product for a full refund. To get a refund, within 14 days from the purchase date you must return the product to the seller in such a condition as it was purchased. 45
| 10U Unless you return the product within 14 days from the purchase date, you will have read and agreed to all the terms and conditions explained above, and Sena will not be liable for any claim for damages related with the product. CERTIFICATION ET HOMOLOGATION EN TERMES DE S CURIT Dclaration de conformit FCC Cet appareil est en conformit avec la partie 15 de la rglementation FCC. L'exploitation est autorise aux deux conditions suivantes :
(1) Cet appareil ne doit pas crer dinterfrences prjudiciables et
(2) Cet appareil doit accepter toutes les interfrences reues, y compris celles qui pourraient entraver son bon fonctionnement. Ce matriel a t test et dclar en conformit avec les limites d'un appareil numrique de Classe B, suivant la partie 15 de la rglementation FCC. Ces limites sont destines assurer une protection raisonnable contre les interfrences prjudiciables dans un environnement rsidentiel. Ce matriel gnre, utilise et peut dgager de lnergie en radio frquence et, sil nest pas install et utilis en conformit avec les instructions, peut provoquer des interfrences prjudiciables avec les communications radio. Cependant, il ny a aucune garantie que des interfrences ne se produiront pas dans des installations particulires. Si ce matriel provoque des interfrences prjudiciables une rception radio ou TV, ce qui peut tre dtermin en allumant puis en teignant l'appareil, il est vivement recommand l'utilisateur d'essayer de mettre un terme ces interfrences en prenant l'une des mesures suivantes :
Rorienter ou repositionner l'antenne rceptrice Augmenter la sparation entre le matriel et le rcepteur. Connecter le matriel une sortie sur un circuit diffrent de celui sur lequel le rcepteur est connect. Contacter le revendeur ou un technicien radio/TV expriment pour une assistance. nonc FCC sur lexposition aux radiations RF :
Cet quipement est conforme aux rglementations FCC dexposition aux radiations dfinies pour un environnement non contrl. Les utilisateurs suivront les instructions dexploitation spcifiques pour rpondre aux exigences de conformit sur lexposition aux RF. Lantenne utilise pour cet appareil ne doit pas fonctionner en mme temps quune autre antenne ou metteur, sauf s'il y a conformit avec les procdures FCC des produits multi-metteurs. Prcautions FCC Tout changement ou modification apport au matriel qui naurait pas t approuv par le responsable de la conformit pourrait invalider le droit de lutilisateur faire fonctionner ce matriel. Dclaration de conformit CE 46
| 10U Ce produit porte un marquage CE, conformment aux dispositions de la directive R&TTE (99/5/CE). Sena dclare par la prsente que ce produit est conforme aux exigences principales et autres dispositions correspondantes de la directive 1999/5/CE. Pour plus dinformations, veuillez consulter le site www.senabluetooth.fr. Veuillez noter que ce produit utilise des bandes de radio frquence non uniformises au sein de lUnion Europenne. Au sein de lUnion Europenne, ce produit est destin tre utilis en Autriche, Belgique, Danemark, Finlande, France, Allemagne, Grce, Irlande, Italie, Luxembourg, Pays-Bas, Portugal, Espagne, Sude et Royaume-Uni et au sein de lAELE, en Islande, Norvge et Suisse. Dclaration de conformit IC (Industrie Canada) Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) Cet appareil ne doit pas crer d'interfrences.
(2) Cet appareil doit accepter toutes les interfrences reues, y compris celles qui pourraient entraver son bon fonctionnement. Licence Bluetooth La marque et les logos Bluetooth sont la proprit de Bluetooth SIG, Inc et toute utilisation de ces marques par Sena s'effectue sous licence. Dautres marques et appellations commerciales sont celles de leurs propritaires respectifs. Le produit est conforme et suit la spcification Bluetooth 3.0 et a russi tous les tests d'interoprabilit mentionns dans la spcification Bluetooth . Cependant, l'interoprabilit entre l'appareil et d'autres produits Bluetooth n'est pas garantie. WEEE(DEEE:Dchets d'quipements lectriques et lectroniques) Le symbole poubelle barre figurant sur le produit, la documentation ou lemballage signifie que tous les produits lectriques et lectroniques, les batteries et les accumulateurs doivent tre conduits en fin de vie dans une structure de rcupration et de recyclage spare. Cette exigence sapplique lUnion Europenne mais aussi aux autres pays o des systmes de rcupration et de recyclage spars existent. Pour prvenir toutes les consquences possibles pour lenvironnement ou la sant dune limination de dchets non con- trle, veuille ne pas considrer ces produits comme des dchets m- nagers, mais vous rendre dans une structure de rcupration officielle pour le recyclage. INFORMATI N A C Veuille vous assurer que le produit est utilis de manire adquate en respectant les avertissements et prcautions numrs ci-dessous pour viter tout risque et/ou dommage matriel. Rangement du produit et manipulation 47
| 10U Garder le produit l'abri de la poussire. Cela pourrait endommager les pices mcaniques et lectroniques du produit. Ne pas ranger le produit dans des ones chaudes car cela pourrait rduire la dure de vie des appareils lectroniques, endommager la batterie et/ou faire fondre les pices en plastique du produit. Ne pas stocker l'appareil dans des ones froides. Des changements de tempratures brusques peuvent former de la condensation et endommager les circuits lectroniques. Ne pas nettoyer le produit avec des solvants de nettoyage, des produits chimiques toxiques ou des dtergents puissants car cela pourrait endommager le produit. Ne pas peindre le produit. La peinture pourrait obstruer les pices amovibles ou interfrer avec le fonctionnement normal du produit. Ne pas laisser tomber ou cogner l'appareil. Cela pourrait endommager le produit ou ses circuits lectroniques internes. Ne pas dmonter, rparer ou modifier le produit car cela pourrait endommager le produit et annuler la garantie du produit. Utilisation du produit Dans certaines rgions, la loi interdit le port d'couteurs en tant moto ou vlo. Assure -vous donc de respecter toutes les lois correspondantes dans la rgion avant d'utiliser le produit. L'utilisation du produit volume lev pendant une priode prolonge peut endommager les tympans ou la capacit auditive. Garder le volume sonore un niveau modr. Ne pas heurter le produit ou le toucher avec des outils tranchants car cela pourrait l'endommager. Ne pas utiliser le produit dans des zones chaudes ou chauffer le produit car cela pourrait occasionner des dommages ou provoquer une explosion ou un incendie. Garder le produit au sec et l'abri de l'eau. Cela pourrait endommager le produit. Tenir le produit hors de porte des animaux ou jeunes enfants. Cela pourrait endommager le produit ou provoquer des accidents. Ne pas utiliser le produit prs d'un four micro-ondes ou d'un appareil LAN sans fil car cela pourrait provoquer un dysfonctionnement ou des interfrences avec le produit. teindre et ne pas utiliser pas le produit dans les endroits o les communications sans fil sont interdites comme les hpitaux ou les avions. Les ondes lectromagntiques peuvent entra ner des risques ou des accidents dans ces endroits. Ne pas utiliser le produit prs d'explosifs. En cas de risques d'explosion proximit, teindre le produit et respecter toute rglementation, instruction ou panneau prsent dans la one. Pour des raisons de scurit, conduire faible vitesse (infrieure 35 km/h) pendant l'utilisation du produit. S'assurer en outre de respecter les lois concernant l'utilisation des appareils de communication lors de la conduite. Ne pas mettre le produit un endroit o il pourrait entraver le champ de vision du conducteur et ne pas le manipuler durant la conduite. Cela pourrait causer des accidents de la route. Avant de conduire, attacher le produit au casque et s'assurer qu'il est bien fix. Le retrait du produit durant la conduite peut provoquer des dommages au produit ou des accidents. Si le produit est endommag, arrter immdiatement de l'utiliser. Cela pourrait entra ner des dommages, une explosion ou un incendie. 48
| 10U Batterie Ce produit contient une batterie rechargeable irrempla able l'intrieur. S'assurer par consquent lors de l'utilisation du produit de respecter ce qui suit :
Ne jamais sparer la batterie du produit car cela pourrait endommager le produit. Les performances de la batterie peuvent s'altrer au fur et mesure de son utilisation. Pendant le chargement de la batterie, s'assurer d'utiliser un chargeur agr fourni par le fabricant. Utiliser un chargeur non agr peut entra ner un incendie, une explosion, une fuite et d'autres risques et peut galement rduire la dure de vie ou les performances de la batterie. Conserver la batterie des tempratures entre 15 C et 25 C. Des tempratures suprieures ou infrieures peuvent rduire la capacit et la dure de vie de la batterie ou empcher momentanment l'utilisation de celle-ci. Ne pas utiliser le produit en cas de tempratures en dessous de ro car cela pourrait causer une rduction significative des performances de la batterie. Chauffer la batterie ou la jeter au feu peut provoquer son explosion. Ne pas utiliser le produit avec une batterie endommage. Il pourrait exploser et/ou causer des accidents. Ne jamais utiliser un chargeur endommag. Il pourrait exploser et/ou causer des accidents. La dure de vie de la batterie dpend des conditions, des facteurs environnementaux, des fonctions en cours d'utilisation du produit et des appareils utiliss conjointement. arantie limite arantie limite Sena Technologies, Inc. ( Sena ) garantit la qualit du produit sur la base des caractristiques techniques nonces dans le manuel du produit et les donnes concernant la garantie du produit. La garantie du produit s'tend ici seulement au produit. Sena n'est pas responsable des pertes, blessures aux personnes ou pertes de proprits qui pourraient rsulter de l'utilisation du produit en dehors des pices dfectueuses ou des dfauts survenant en raison de problmes lors de la fabrication. riode de garantie Sena garantit le remplacement sans frais des pices dfectueuses du produit ou des dfauts ayant pu survenir en raison de problmes lors de la fabrication pour une priode de deux ans compter de la date d'achat initiale FIN DE LA GARANTIE La garantie de qualit du produit prend effet le jour de l'achat initial. De plus, la garantie de qualit du produit expire lorsque la priode de garantie expire. Dans les cas suivants toutefois, la garantie prendra fin avant terme. Dans le cas o le produit a t vendu ou transfr un tiers. Dans le cas o le nom, le numro de srie, l'tiquette du produit ou d'autres marquages du fabricant ont t modifis ou supprims. Dans le cas o une personne non autorise a tent de dmonter, rparer ou modifier le produit. 49 Avis et renonciation
| 10U En achetant et en utilisant ce produit, vous renonce des droits lgaux importants y compris les demandes d'indemnisation pour dommages. En consquence, assure -vous de lire et de comprendre les conditions suivantes avant d'utiliser le produit. L'utilisation de ce produit constitue un consentement au prsent accord et un renoncement aux droits toute indemnisation. Si vous ne consente pas toutes les conditions du prsent accord, renvoye le produit pour un remboursement. (Reporte -vous la section Renvoi pour remboursement total .) 1. Vous convene que vous, vos descendants, reprsentants lgaux, hritiers, ou cessionnaires ne fere de votre propre gr et, de manire permanente, de demande de procs, d'indemnisation, d'excution, de rachat ou toute action similaire l'encontre de Sena concernant toute occasion comme la difficult, la douleur, la souffrance, le dsagrment, la perte, la blessure ou le dcs qui se produirait votre encontre ou un tiers durant l'utilisation de ce produit. 2. Vous deve parfaitement comprendre et accepter tous les risques (y compris ceux se produisant en raison de votre ngligence ou d'autres) pouvant survenir durant l'utilisation de ce produit. 3. Vous ave la responsabilit de vous assurer que votre condition mdicale permet l'utilisation du produit et que votre condition physique est suffisante pour utiliser tout appareil pouvant tre utilis conjointement. De plus, vous deve vous assurer que le produit ne limite pas vos capacits et que vous tes en mesure de l'utiliser en toute scurit. 4. Vous deve tre majeur et porter la responsabilit de l'utilisation du produit. 5. Vous devez lire et comprendre les avertissements et les alertes suivantes :
Sena, en collaboration avec les employs, responsables, partenaires, filiales, reprsentants, agents, entreprises et fournisseurs impliqus, seuls vendeurs de Sena (collectivement dsigns comme l'entreprise ) vous recommandent, avant d'utiliser le produit et des appareils similaires de diffrentes marques y compris leurs modles drivs, de recueillir l'avance toutes les informations pertinentes et d'tre entirement prpar quant aux conditions mtorologiques et routires ainsi qu' l'tat de la circulation. Si vous utilise le produit tout en conduisant un vhicule tel que des motos, scooters, cyclomoteurs, quatre-quatre ou quads (ci-aprs dnomms moyens de transport ), vous devez faire preuve de la plus grande prudence quel que soit l'endroit d'utilisation. L'utilisation du produit sur la route peut entra ner des risques de fractures, d'invalidit grave ou de dcs. Les facteurs de risque, pouvant survenir lorsque vous utilisez le produit, peuvent rsulter d'erreurs du fabricant, de ses agents ou de tiers impliqus dans la fabrication. Les facteurs de risque pouvant survenir lorsque vous utilise le produit, peuvent tre imprvisibles. Vous deve par consquent porter l'entire responsabilit pour tout dommage ou perte cause par l'ensemble des facteurs de risque pouvant survenir lors de l'utilisation du produit. Lorsque vous utilisez le produit, faites preuve de discernement ; ne l'utilisez jamais sous l'emprise de l'alcool. 6. Vous deve lire et comprendre intgralement toutes les conditions se rapportant aux droits lgaux et aux avertissements quimplique l'utilisation du produit. L'utilisation du produit constitue en outre une acceptation de l'ensemble des conditions concernant la renonciation des droits. Exclusions de garantie Raisons des limitations de responsa ilit Si vous ne renvoye pas le produit aprs l'avoir achet, vous renonce tous les droits de responsabilit, de pertes, de 50
| 10U rclamations et d'indemnisations pour le remboursement des dpenses (y compris les honoraires d'avocat). Par consquent, Sena n'est pas responsable des blessures physiques, dcs ou pertes ou dommages des moyens de transport, possessions ou actifs vous appartenant ou appartenant des tiers ayant pu se produire lors de votre utilisation du produit. D'autre part, Sena n'est pas responsable des dommages substantiels qui ne sont pas lis l'tat, l'environnement ou au dysfonctionnement du produit. Tous les risques associs l'utilisation du produit dpendent entirement de l'utilisateur, quelle que soit son utilisation par l'acheteur d'origine ou d'un tiers. L'utilisation de ce produit peut tre contraire aux lois locales et nationales. De plus, soye bien conscient que l'utilisation adquate et sans danger de ce produit relve de votre entire responsabilit. imitation de responsa ilit DANS LES LIMITES PERMISES PAR LA LOI, SENA EXCLUT POUR ELLE-M ME ET SES FOURNISSEURS TOUTE RESPONSABILIT CONTRACTUELLE OU D LICTUELLE (Y COMPRIS UNE N GLIGENCE) DE TOUT DOMMAGE DIRECT, CONS CUTIF, INDIRECT OU PUNITIF DE QUELQUE NATURE QUE CE SOIT, OU POUR LA PERTE DE REVENUS OU DE PROFITS, PERTES COMMERCIALES, PERTES D'INFORMATIONS OU DE DONN ES OU TOUTE AUTRE PERTE FINANCI RE R SULTANT DE OU EN RELATION LA VENTE, L'INSTALLATION, L'ENTRETIEN, L'UTILISATION, LA PERFORMANCE, LA PANNE OU L'INTERRUPTION DE SES PRODUITS, M ME SI SENA OU SES REVENDEURS AUTORIS S ONT T AVERTIS DE L' VENTUALIT DE TELS DOMMAGES, ET LIMITE SA RESPONSABILIT R PARER, REMPLACER OU REMBOURSER LE PRIX D'ACHAT PAY , AU CHOIX DE SENA. CET AVIS DE NON RESPONSABILIT POUR LES DOMMAGES NE SERA PAS AFFECT SI UN RECOURS APPORT PR SENTEMENT N'ATTEINT PAS SON BUT ESSENTIEL. DANS TOUS LES CAS, LES RESPONSABILIT S D'INDEMNISATIONS TOTALES DE SENA OU DE SES AGENTS DE VENTE NE PEUVENT D PASSER LE PRIX PAY POUR LE PRODUIT PAR L'ACHETEUR. Exonration de responsa ilits Outre les dommages pouvant survenir en raison de l'utilisation du produit, Sena n'est pas tenu responsable des dommages du produit survenant en raison des situations suivantes. Dans le cas o il est fait mauvais usage du produit ou qu'il est utilis dans un but autre que celui prvu. Dans le cas o le produit est endommag car l'utilisateur ne suit pas le contenu du manuel du produit. Dans le cas o le produit est endommag car il a t laiss sans surveillance ou a subi un autre accident. Dans le cas o le produit est endommag car l'utilisateur s'est servi de pices ou d'un logiciel n'tant pas fourni par le fabricant. Dans le cas o le produit est endommag car l'utilisateur l'a dmont, rpar ou modifi d'une manire ne figurant pas dans le manuel du produit. Dans le cas o le produit est endommag par un tiers. Dans le cas o le produit est endommag en raison d'vnements imprvisibles (y compris les incendies, inondations, tremblements de terre, temptes, ouragans et autres catastrophes naturelles). Dans le cas o la surface du produit est endommage pour cause d'usure. Service de garantie Pour faire valoir vos droits un service de garantie du produit, envoye le produit dfectueux, vos frais, au fabricant ou revendeur accompagn de la preuve d'achat (un re u indiquant la date d'achat, le certificat d'enregistrement du produit du site internet et d'autres informations pertinentes). Prenez les mesures ncessaires pour protger le produit. Afin 51 d'obtenir le remboursement ou le remplacement du produit, vous deve inclure la totalit du paquet comme au moment
| 10U de l'achat. Service sans frais Sena offre un service de rparation ou de remplacement sans frais du produit lorsque les dfauts de produit rentrent dans la limite de la garantie du produit durant la priode de garantie. Service payant Sena offre un service de rparation ou de remplacement payant du produit lorsque la priode de garantie du produit a expir ou lorsque les dommages causs au produit sortent du cadre de la garantie du produit. Pour de plus amples informations sur le service payant, vous pouvez contacter le centre de services de Sena. Renvoi pour remboursement total Si vous n'tes pas d'accord avec les conditions exposes ci-dessus, vous pouve renvoyer le produit pour un remboursement total. Pour obtenir le remboursement, vous deve renvoyer le produit au vendeur dans le mme tat dans lequel il a t achet, dans une priode de 14 jours compter de la date d'achat. moins de renvoyer le produit dans une priode de 14 jours compter de la date d'achat, vous aure lu et accept l'ensemble des conditions exposes ci-dessus et Sena ne sera pas responsable de toute rclamation ou dommages associs au produit. 1.0.0 SENA www.sena.com User's Guide for Firmware v1.0 52 Warning
| 10U When the EUT is mounted with helmet, it has to be to maintain a distance of 35.5 mm from ones head surface. Lorsque l'EST est mont avec un casque, il doit tre maintenu une distance de 35.5 mm de la surface de la tte. SENA www.sena.com User's Guide for Firmware v1.0 53
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2018-05-29 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Class II Permissive Change |
2 | 2402 ~ 2480 | DTS - Digital Transmission System | ||
3 | 2015-06-02 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
4 | 2402 ~ 2480 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 | Effective |
2018-05-29
|
||||
1 2 3 4 |
2015-06-02
|
|||||
1 2 3 4 | Applicant's complete, legal business name |
SENA TECHNOLOGIES.Inc
|
||||
1 2 3 4 | FCC Registration Number (FRN) |
0013268917
|
||||
1 2 3 4 | Physical Address |
19, Heolleung-ro 569-gil, Gangnam-gu
|
||||
1 2 3 4 |
Seoul, N/A
|
|||||
1 2 3 4 |
South Korea
|
|||||
app s | TCB Information | |||||
1 2 3 4 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 2 3 4 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 3 4 | Grantee Code |
S7A
|
||||
1 2 3 4 | Equipment Product Code |
SP22
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 | Name |
S**** K********
|
||||
1 2 3 4 | Title |
Research Engineer
|
||||
1 2 3 4 | Telephone Number |
82257******** Extension:
|
||||
1 2 3 4 | Fax Number |
82257********
|
||||
1 2 3 4 |
s******@sena.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 3 4 | Yes | |||||
1 2 3 4 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 3 4 | Yes | |||||
1 2 3 4 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 11/29/2015 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 3 4 | DTS - Digital Transmission System | |||||
1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Motorcycle Bluetooth Communication System | ||||
1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 4 | Modular Equipment Type | Does not apply | ||||
1 2 3 4 | Purpose / Application is for | Class II Permissive Change | ||||
1 2 3 4 | Original Equipment | |||||
1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 | Yes | |||||
1 2 3 4 | Grant Comments | Power listed is conducted. End-users must be provided with the specific operating instructions for satisfying RF exposure compliance. The device must operate with the minimum separation distance tested for compliance, as described in this filing, which is at least 30 mm. | ||||
1 2 3 4 | Power listed is conducted. | |||||
1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 | Firm Name |
DT&C Co., Ltd.
|
||||
1 2 3 4 |
DT&C Co.,
|
|||||
1 2 3 4 | Name |
L****** S******
|
||||
1 2 3 4 |
C******** L********
|
|||||
1 2 3 4 | Telephone Number |
82-31********
|
||||
1 2 3 4 | Fax Number |
82-31********
|
||||
1 2 3 4 |
g******@dtnc.net
|
|||||
1 2 3 4 |
c******@digitalemc.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0173380 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0036000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0173380 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0036000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC