FCC ID: S7A-SP126 WiFi Adapter

WiFi Adapter Manual 1. Introduction WiFi Adapter is a device for SENA WIFI2.4G that charges and provides auto firmware upgrade. WiFi Adapter can automatically connect to the router through the mobile app, automatically download the latest firmware available for SENA Device, and can always upgrade to the latest firmware through comparing firmware version when the user plugs SENA Device into the USB port to charge. 2. WiFi Adapter features Supports WiFi related IEEE 802.11b, IEEE 802.11g, IEEE 802.11n Smartphone App for iPhone and Android Firmware upgradeable 3. Contents

- Wifi Adapter 4. Product description 5. Getting started a. Power On:

Insert the USB port into the charger and insert the Micro USB Port into the USB power port b. Connecting to WiFi 1. Open the mobile app 2. Connect to WiFi Docking 3. Setting WiFi Docking Station configuration 4. Select the WiFi router to connect to. 5. Enter the password of the selected WiFi router and click Connect 6. WiFi Adapter is connecting to the router. 7. Click Setup Complete when connected 8. After following these steps, WiFi Adapter should be connected to WiFi. WiFi status LED will show blue light if the WiFi router is connected successful and show red light if there has been a failure to connect. To change the router connection, repeat the steps above. 9. 10. You can update Sena devices such as 30K manually and update WiFi Docking Station c. Charging SENA Bluetooth device Plug in the Micro USB to sena Bluetooth device to charge the device. The Charging status LED will show red light while charging and turn blue when the device is fully charged. d. Upgrading Firmware Firmware will be upgraded automatically while charging 30K through checking the firmware version and downloading the latest firmware available. Firmware upgrade status LED will show blue light when upgrade finished and blink while firmware is upgrading. FCC Warning NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. IC Warning This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Pour maintenir la conformit avec les lignes directrices de lexposition RF de FCC, cet quipement devrait tre install et exploit une distance minimale de 20 cm le radiateur de votre corps : utilisez seulement lantenne fournie. Manufacturer's Name: SENA TECHNOLOGIES.Inc Product Name: WiFi Adapter Trade Mark: SENA Model number: SP126 Operating Temperature: -10C to 40 C This device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out. Detailed DOC file see attachment The device complies with RF specifications when the device used at 20cm from your body. The product shall only be connected to a USB interface of version USB2.0 Care for the environment! Must not be discarded with household waste!

RF Secification:

Function Operation Frequency WIFI 802.11b/g/n(HT20) 802.11b/g/n(20MHz): 2412~2472MHz;

This product can be used across EU member states. Max RF outputpower:

802.11b: 17.08dBm;

802.11g: 17.21dBm;

802.11n20: 16.49dBm;

Limit 20 dBm.

C5266091_X10_Ed.2

< SENA TECHNOLOGIES. Inc >

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2022-05-25 Subject: Request for Confidentiality FCC ID: S7A-SP126 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFRO.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Short-Term Confidentiality | Confidentiality OTE 2 ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Bee Internal Photos Bere Parts List / Tune Up / BOM List RF Exposure Info Operational Description Cover Letter(s) FCC Software Security Requirements for UNII devices oo8g0 00 OOOO 8 eR, oO0}WoO)o qogog0 NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See ll. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of _180_ days from the date of the Grant of Equipment Authorization and prior to marketing. ri 5266091_X10_Ed.2 It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Sewahyn Eim Name: Seunghyun KIM Title: Research Engineer v1

5266091_X8_Ed.1 Letter of Authorization

< SENA TECHNOLOGIES.Inc >

Company: SENA TECHNOLOGIES.Inc Address: 19, Heolleung-ro 569-gil, Gangnam-gu,Seoul,South Korea Product Name: WiFi Adapter Model Number: SP126 FCC Identifier: S7A-SP126 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Seunghyun KIM Date: 05/25/2022 Title: Research Engineer Signature of applicant: Sovnahnyun kim ai

SENA TECHNOLOGIES. Inc 19, Heolleung-ro 569-gil, Gangnam-gu,Seoul,South Korea Date: 05/25/2022 FCC ID: S7A-SP126 Model Number: SP126 To:

Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, SENA TECHNOLOGIES. Inc declare that this EUT (FCC ID: S7A-SP126) will conduct FCC compliance testing, the sDOC part recognized test lab(Shenzhen NTEK Testing Technology Co., Ltd.). 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Baoan District, Shenzhen 518126 P.R. China Please contact me if you have any question, Sincerely, Gigned) enn hy kn Name / Title: Seunghyun KIM / Research Engineer Company: SENA TECHNOLOGIES. Inc Address: 19, Heolleung-ro 569-gil, Gangnam-gu,Seoul,South Korea Phone: 8225718283 Email: shkim77@sena.com