all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Safety Guide | Users Manual | 1.41 MiB | August 11 2019 | |||
1 |
|
User Manual | Users Manual | 3.08 MiB | August 11 2019 | |||
1 | Cover Letter(s) | August 11 2019 | ||||||
1 | Cover Letter(s) | August 11 2019 | ||||||
1 | Cover Letter(s) | August 11 2019 | ||||||
1 |
|
External Photos 1 | External Photos | 124.47 KiB | August 11 2019 | |||
1 |
|
External Photos 2 | External Photos | 152.15 KiB | August 11 2019 | |||
1 |
|
External Photos 3 | External Photos | 160.97 KiB | August 11 2019 | |||
1 |
|
External Photos 4 | External Photos | 152.23 KiB | August 11 2019 | |||
1 |
|
External Photos 5 | External Photos | 165.62 KiB | August 11 2019 | |||
1 |
|
External Photos 6 | External Photos | 124.92 KiB | August 11 2019 | |||
1 |
|
External Photos 7 | External Photos | 153.85 KiB | August 11 2019 | |||
1 |
|
External Photos 8 | External Photos | 155.08 KiB | August 11 2019 | |||
1 |
|
External Photos 9 | External Photos | 151.44 KiB | August 11 2019 | |||
1 | ID Label/Location Info | August 11 2019 |
1 | Safety Guide | Users Manual | 1.41 MiB | August 11 2019 |
EN FR ES Consignes de scurit importantes Lisez soigneusement et intgralement la notice demploi, le guide de scurit, le guide de dmarrage rapide (selon la livraison) avant dutiliser le produit. Si vous mettez le produit la disposition dun tiers, joignez-y toujours le guide de scurit. Nutilisez pas un produit manifestement d fectueux. Avant dutiliser ce produit, veuillez observer les dispositions lgales en vigueur dans votre pays !
Prvenir des atteintes la sant et des accidents vitez dcouter des volumes sonores levs pendant de longues priodes pour viter des dommages auditifs. Maintenez toujours le botier de lcouteur plus de 10 cm des stimulateurs cardiaques et des dfibrillateurs implants (DAI) car le produit gnre des champs magntiques permanents. Conservez le produit et daccessoires hors de porte des enfants et des animaux domestiques pour prvenir des accidents et risques dtouffement. Nutilisez pas le produit dans un environnement qui exige une les pices demballage et concentration particulire (par ex. sur la route). Prvenir les dommages au produit et les dysfonctionnements Conservez le produit au sec et ne lexposez ni des tempratures extrmement basses ni des tempratures extrmement hautes
(sche-cheveux, radiateur, exposition prolonge au soleil, etc.) afin dviter des corrosions ou dformations. Nutilisez que les appareils auxiliaires/accessoires/pices de rechange recommands par Sennheiser. Ne nettoyez le produit quavec un chiffon doux et sec. Retirez la fiche du bloc secteur de la prise de courant pour compltement dbrancher le produit du secteur. Ne mettez jamais les contacts du produit en court-circuit. Veillez ce quaucun objet mtallique (trombones, pingles cheveux, boucles doreilles etc.) nentre en contact avec les ports ou les contacts. Utilisez uniquement la station de base ou le chargeur CH 10 pour charger les casques-micros de la srie SD (SD Office, SD Office USB, SD Office Phone, SD Pro1/Pro2, SD Pro1/Pro2 USB, SD Pro1/Pro2 Phone). Indicaciones importantes de seguridad Lea detenidamente y en su totalidad el manual de instrucciones, las indicaciones de seguridad y las instrucciones resumidas
(segn suministro) antes de usar el producto. En caso de que entregue el producto a terceros, hgalo siempre junto con estas indicaciones de seguridad. No utilice el producto si est obviamente deteriorado. Antes de la puesta en funcionamiento, compruebe la normativa especfica del pas. Evitar daos para la salud y accidentes Para evitar daos auditivos, no escuche msica a alto volumen durante periodos prolongados de tiempo. Guarde siempre una distancia mnima de 10 cm entre los cascos y el marcapasos o el desfibrilador implantado (ICDs) ya que el producto genera campos magnticos permanentes. Mantenga el producto, el embalaje y sus accesorios fuera del alcance de los nios y de los animales domsticos para evitar accidentes y el riesgo de asfixia. No utilice el producto si su entorno requiere una atencin especial (p. ej. a la hora de conducir). Evitar daos en el producto y averas Asegrese de que el producto est siempre seco y en ningn caso lo exponga a temperaturas extremadamente altas ni bajas
(secador, calefaccin, exposicin prolongada a los rayos del sol, etc.) para evitar corrosin o deformaciones. Utilice exclusivamente complementos/accesorios/piezas de repuesto suministradas o recomendadas por Sennheiser. Limpie el producto slo con un pao suave y seco. Para desenchufar por completo el producto de la red de corriente, desenchufe la fuente de alimentacin de la toma de corriente. No provoque un cortocircuito con los contactos del producto. Asegrese de mantener los objetos metlicos (como p. ej. grapas de oficina, horquillas de pelo, pendientes) alejados de interfaces y contactos. Con la estacin base o con el cargador CH 10 se deben cargar nicamente headsets de la serie SD (SD Office, SD Office USB, SD Office Phone, SD Pro1/Pro2, SD Pro1/Pro2 USB, SD Pro1/
Pro2 Phone). Conisgnes de scurit concernant les batteries Lithium-Polymre Indicaciones de seguridad para pilas recargables de polmeros de litio AVERTISSEMENT Dans des cas extrmes, une utilisation abusive ou incorrecte des piles/batteries peut entraner :
une explosion, un incendie, un dgagement de chaleur ou un dgagement de fume ou de gaz. Jetez les produits dfectueux avec leurs batteries intgres dans un conteneur de recyclage ou ramenez-les votre revendeur. Utilisez uniquement les batteries recommandes par Sennheiser et des chargeurs appropris. Ne rechargez les batteries qu une temprature ambiante entre 10 C/50 F et 40 C/104 F. teignez les produits aliments par batteries lorsquils ne sont plus utiliss. En cas de non utilisation prolonge, rechargez les batteries rgulirement (tous les 3 mois environ). ADVERTENCIA En caso de un uso abusivo o no adecuado ila recargable de polmeros de litio, existe en casos extremos el peligro de:
Formacin de calor Incendio Explosin Formacin de humo o gases Devuelva los productos defectuosos incl. pila recargable a los puntos de recogida o a su distribuidor especializado. Utilice slo las pilas recargables recomendadas por Sennheiser y los cargadores adecuados para ellas. Cargue las pilas recargables a una temperatura ambiente de 10 C a 40 C. Los productos que se alimenten mediante pilas recargables se deben apagar despus de utilizarlos. Si no se utilizan las pilas recargables durante un periodo prolongado de tiempo, recrguelas regularmente (aprox. cada 3 meses). Ne chauffez pas les batteries plus de 70 C/158 F, par ex. ne les exposez pas au soleil ou ne les jetez pas au feu. No caliente las pilas recargables a ms de 70 C. Evite la radiacin solar y no tire las pilas recargables al fuego. Utilisation conforme aux directives/responsabilit Le systme casque-micro peut tre utilis pour la tlphonie et si utilis avec un ordinateur (VoIP) et/ou un tlphone pour lentre/la sortie audio. Il est conu pour les applications professionnelles bureautiques et de centre dappels. Est considre comme une utilisation non conforme aux directives toute application diffrant de celle dcrite dans le prsent guide de scurite. Sennheiser dcline toute responsabilit en cas de dommage rsultant dune mauvaise utilisation ou dune utilisation abusive du produit et de ses appareils supplmentaires/accessoires. Le risque est support par lutilisateur. Sennheiser dcline toute responsabilit en cas de dommage aux appareils USB qui ne rpondent pas aux spcifications USB. Sennheiser dcline toute responsabilit en cas de dommage rsultant de la perte de liaison due une batterie puise, une vieille batterie ou si vous dpassez la porte de transmission DECT. Dclarations du fabricant Garantie Sennheiser Communications A/S offre une garantie de 24 mois sur ce produit. Pour avoir les conditions de garantie actuelles, veuillez visiter notre site web sur www.sennheiser.com ou contactez votre partenaire Sennheiser. Uso adecuado/Responsabilidad El sistema de headset se ha creado para telefonear y como entrada y salida de audio en combinacin con un ordenador (VoIP) y/o un telfono para el uso profe-sional en la oficina o en el Callcenter. Se considerar uso no adecuado el uso de este producto de forma distinta a como se describe en estas indicaciones de s eguridad. Sennheiser no asumir ningn tipo de responsabilidad si se hace un uso no adecuado del producto o de los aparatos adicionales/
accesorios. El riesgo ser nicamente del usuario. Sennheiser no se responsabilizar por daos en aparatos USB que no coincidan con las especificaciones USB. Sennheiser no se responsabiliza de los daos por fallos de conexin provocados por pilas recargables gastadas o viejas o por haber excedido el rea de transmisin DECT. Declaraciones del fabricante Garanta Sennheiser Communications A/S concede una garanta de 24 meses sobre este producto. Puede consultar las condiciones de garanta actuales en la pgina de Internet www.sennheiser.com u obtenerlas de su distribuidor Sennheiser. SD Series SD Office SD Office USB SD Office Phone SD Pro 1/Pro 2 SD Pro 1/Pro 2 USB SD Pro 1/Pro 2 Phone Important safety instructions Read the instruction manual, safety guide, quick guide (as supplied) carefully and completely before using the product. Always include this safety guide when passing the product on to third parties. Do not use an obviously defective product. Before putting the product into operation, please observe the respective country-specific regulations!
Preventing damage to health and accidents Do not listen at high volume levels for long periods of time to prevent hearing damage. Always maintain a distance of at least 3.94 (10 cm) between the ear cups and the cardiac pacemaker or implanted defibrillator since the product generates permanent magnetic fields. Keep the product, accessories and packaging parts out of reach of children and pets to prevent a ccidents and choking hazards. Do not use the product in an environment that r equires your Safety Guide Consignes de scurit Indicaciones de seguridad Guia de Segurana special attention (e.g. in traffic). Preventing damage to the product and malfunctions Always keep the product dry and do not expose it to extreme temperatures (hairdryer, heater, e xtended exposure to sunlight, etc.) to avoid corrosion or deformation. Use only attachments/accessories/spare parts supplied or recommended by Sennheiser. Only clean the product with a soft, dry cloth. Unplug the power supply unit from the wall socket to completely disconnect the product from the mains power supply. Do not short-circuit the contacts of the product. Make sure that no metal objects (e.g. paper clips, hair pins, earrings) come into contact with the interfaces and contacts. Only use the base station or the CH 10 charger for charging SD series headsets (SD Office, SD Office USB, SD Office Phone, SD Pro1/Pro2, SD Pro1/Pro2 USB, SD Pro1/Pro2 Phone). Safety instructions for the Lithium-Polymer battery pack WARNING In extreme cases, abuse or misuse of Lithium-Polymer battery pack can lead to:
explosion, fire development, heat generation or smoke or gas development. Dispose of defective products with built-in rechargeable batteries at special collection points or return them to your specialist dealer. Only use rechargeable batteries recommended by Sennheiser and the appropriate chargers. Only charge the battery pack at ambient temperatures between 10C/50F and 40C/104F. Switch battery pack-powered products off after use. When not using the battery pack for extended periods of time, charge them regularly (about every 3 months). Do not heat above 70C/158F, e.g. do not expose to sunlight or throw into a fire. Intended use/Liability The headset system can be used for calling and together with a computer (VoIP) and/or a telephone for audio input/output and is intended for professional office or call center use. It is considered improper use when this product is used for any application not named in the associated product guides. Sennheiser does not accept liability for damage arising from abuse or misuse of this product and its attachments/accessories. The risk is to be borne by the user. Sennheiser is not liable for damages to USB devices that are not consistent with the USB specifications. Sennheiser is not liable for damages resulting from the loss of connection due to flat or overaged rechargeable batteries or exceeding the DECT transmission range. Manufacturer Declarations Warranty Sennheiser Communications A/S gives a warranty of 24 months on this product. For the current warranty conditions, please visit our website at www.sennheiser.com or contact your Sennheiser p artner. Sennheiser Communications A/S Industriparken 27, DK-2750 Ballerup, Denmark www.sennheiser.com Printed in China, Publ. 09/19, 770-00025/A10 Specifications | Caractristiques techniques |
Especificaciones tcnicas | Dados tcnicos Base station Dimensions (W x H x D) Weight Operating temperature range Storage temperature range Headset Dimensions (W x H x D) SD Office HS SD Pro1/Pro2 HS (SD 10) Weight SD Office HS SD Pro1 HS (SD 10) SD Pro2 HS (SD 10) Talk time Charging time Range
(environment dependent) Speaker type Microphone type Operating temperature range Storage temperature range 83 x 127 x 121 mm SD BS/SD BS ML: 337 g SD BS USB/SD BS USB ML/
SD BS Phone: 309 g
+5 C to +45 C
(+41 F to +113 F) 20 C to +70 C
(4 F to +158 F) 140 x 24 x 22 mm 170 x 175 x 55 mm with ear hook: approx. 22 g with headband: approx. 50 g approx. 65 g approx. 85 g narrowband: up to 12 hours wideband: up to 8 hours 50%: approx. 20 min 100%: approx. 1 hour free line of sight: up to 180 m in office buildings: up to 55 m dynamic, neodymium magnet electret microphone, noise canceling
+5 C to +45 C
(+41 F to +113 F) 20 C to +70 C
(4 F to +158 F) Power supply unit Nominal input voltage Nominal input current Mains frequency Nominal output voltage Nominal output current Operating temperature range Storage temperature range Relative humidity Weight 100 240 V~
max. 0.2 A 50 60 Hz 5.9 V DC max. 850 mA
+5 C to +45 C
(+41 F to +113 F) 20 C to +70 C
(4 F to +158 F) operation: 20 to 85%
storage: 20 to 95%
approx. 75 g PT Instrues de segurana importantes Antes de utilizar o produto, leia o manual de instrues, o guia de segurana e o guia rpido (como fornecido), com ateno e na ntegra. Sempre que der o produto a terceiros, inclua estas instrues de segurana. No utilize o produto se este apresentar danos visveis. Antes da colocao em funcionamento verifique os USA and Canada:
SD BS - US / SD BS ML US and headsets Statement regarding FCC FCC Declaration of Conformity (DoC) SENNHEISER Model No:
SD BS-US, SD BS USB-US, SD BS ML-US, SD BS USB ML-US, SD BS Phone-US, SD 10 HS, SD 20 HS, SD 30 HS We, Sennheiser Electronic Corporation One Enterprise Drive Old Lyme CT 06371 USA Tel: +1 (860) 434 9190, ext. 144 Fax: +1 (860) 434 1759 regulamentos especficos nacionais!
Evitar danos para a sade e acidentes No utilize o produto com volume muito alto durante muito declare the above device comply with the requirements of Federal Communications Commission. This device complies with Part 15 subpart b of the FCC rules. Operation is subjected to the following two conditions:
1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. Responsible Party: Michael Lieske tempo de modo a evitar danos na audio. Mantenha sempre uma distncia mnima de 10 cm entre as conchas dos auscultadores e pacemakers ou desfibriladores implantados (ICD), pois o produto gera campos magnticos permanentes. Mantenha o produto, embalagem e acessrios fora do alcance das crianas e animais domsticos a fim de evitar acidentes e o perigo de asfixia. No utilize o produto em situaes que requeiram a sua particular ateno (por ex., no trnsito). Evitar danos no produto e interferncias Mantenha o produto sempre seco e no o exponha a temperaturas extremamente altas ou baixas (secador, aquecedor, exposio direta prolongada luz solar, etc.) para evitar corroso e deformaes. Utilize apenas componentes/acessrios/peas sobressalentes fornecidos ou recomendados pela Sennheiser. Use apenas um pano seco e macio para limpar o produto. Retire o alimentador de ficha da tomada para desligar o produto da rede. Nunca ligue os contactos do produto em curto-circuito. Preste ateno para no deixar objetos metlicos (como, por ex., agrafos, ganchos de cabelo, brincos) entrar em contacto com as interfaces e os contactos. Carregue com a base ou com o carregador CH 10 exclusivamente micro-auscultadores da srie SD (SD Office, SD Office USB, SD Office Phone, SD Pro1/Pro2, SD Pro1/Pro2 USB, SD Pro1/Pro2 Phone). Instrues de segurana relativamente bateria de polmeros de ltio AVISO Em caso de utilizao abusiva ou inadequada da bateria de polmeros de ltio, existe, em caso extremo, o perigo de:
exploso;
incndio;
gerao de calor;
formao de fumo ou gases. Entregue sempre as pilhas recarregveis defeituosas em pontos de recolha de pilhas (pilhes) ou lojas da especialidade. Utilize exclusivamente pilhas recarregveis recomendadas pela Sennheiser e carregadores adequados. Carregue sempre as pilhas recarregveis a uma temperatura ambiente entre 10 C a 40 C. This equipment has been tested and found to comply with the limits for a Class B digital device of the FCC Rules, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. Changes or modifications made to this equipment not expressly approved by Sennheiser electronic Corp. may void the FCC authorization to operate this equipment. The headset SD HS complies with FCC RF radiation exposure limits for general public. It has been tested for SAR and has complied the FCC SAR limits for general population. Statement regarding Industry Canada This device complies with RSS-213 Issue 2 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The headset SD HS complies with Industry Canada RF radiation exposure limits for devices used by the general public. It has been tested for SAR and has complied with Industry Canada SAR limits for devices used by the general public. Dclaration requise par Industrie Canada la norme CNR-213, 2e dition, Ce dispositif est conforme fonctionnement est sujet aux deux dIndustrie Canada. Son conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Le casque-micro SD est conforme aux limites dexposition aux radiofrquences des dispositifs pour utilisation par le grand public dictes par Industrie Canada. Il est subi une valuation du DAS et est conformes aux limites du DAS des dispositifs pour utilisation par le grand public dictes par Industrie Canada. In compliance with:
Desligue produtos abastecidos por pilhas recarregveis se estes no forem usados. USA FCC ID: R3UD10BS (base station) FCC ID: R3UD10HS (headset) Recarregue as pilhas recarregveis regularmente mesmo se estas no forem utilizadas
(aprox. de 3 em 3 meses). No exponha as pilhas recarregveis a temperaturas superiores a 70 C. Evite a exposio direta ao sol e no deite as pilhas para o fogo. Canada CAN ICES-3(B)/NMB-3(B) IC: 2099D-D10BS (base station) IC: 2099D-D10HS (headset) Utilizao adequada/responsabilidade O sistema de micro-auscultadores foi concebido para realizar chamadas telefnicas e para a entrada e sada udio em conjunto com um computador (VoIP) e/ou telefone para utilizao profissional no escritrio ou centros de atendimento. Como utilizao inadequada do produto considerada a sua utilizao para fins no descritos nestas instrues de segurana. A Sennheiser no assume qualquer responsabilidade pela utilizao abusiva ou inadequada do produto, bem como dos seus acessrios. Neste caso, o risco suportado pelo utilizador. A Sennheiser no se responsabiliza por danos em dispositivos USB que no estejam em conformidade com as especificaes USB. A Sennheiser no se responsabiliza por danos resultantes de interrupes acumuladores descarregados ou antigos, nem por danos que advenham do facto de no ter sido respeitado o alcance mximo da emisso DECT. originadas ligao por de Declaraes do fabricante Garantia A Sennheiser Communications A/S assume uma garantia de 24 meses para este produto. As atuais condies de garantia encontram-se disponveis em www.sennheiser.com ou junto do seu distribuidor Sennheiser. Brasil:
SD 10 ML BR / SD 20 ML BR / SD 30 ML BR Declarao sobre a Anatel Este produto est homologado pela Anatel, de acordo com os procedimentos regulamentados pela Resoluo n. 242/2000 e atende aos requisitos tcnicos aplicados, incluindo os limites de exposio da Taxa de Absoro Especfica referente a campos eltricos, magnticos e eletromagnticos de radiofreqncia de acordo com as Resolues n. 303/2002 e 533/2009. In compliance with:
Brazil 06152-17-10741
1 | User Manual | Users Manual | 3.08 MiB | August 11 2019 |
DECT Comfort call SetupGuide SD Series Instruction manual Contents Setup Guide Contents Setup Guide Important safety information ....................................................................... 2 Scope of delivery and overview of the SD series ........................................ 3 Base stations with components ................................................................... 3 Headsets with components .......................................................................... 4 Product overview of the base stations ........................................................ 5 Overview of the front ..................................................................................... 5 Overview of the rear ...................................................................................... 5 Overview of the bottom ................................................................................ 6 Setting up the base station ........................................................................... 7 Connecting the base station to the mains power supply ....................... 7 Connecting the base station to a fixed line phone .................................. 8 Connecting the base station to an optional electronic hook switch control (EHS) ........................................................10 Connecting the base station to a computer ............................................11 Charging the headset ................................................................................... 12 Testing the headset system and the sound quality ................................ 14 Adjusting the headset system using the DIP switches .........................14 Adjusting the audio signal by means of the dial tone ..........................16 Adjusting the volume ..................................................................................17 Adjusting the automatic audio transmission Auto Audio ................17 If a problem occurs ....................................................................................... 18 Specifications ................................................................................................ 19 Manufacturer Declarations .......................................................................... 21 SD Series Setup Guide | 1 Important safety information 2 | SD Series Setup Guide Important safety information Please read this instruction manual carefully and completely before using the product. Always include this instruction manual when passing the product on to third parties. Do not use an obviously defective product. Preventing damage to health and accidents Do not listen at high volume levels for long periods of time to prevent hearing damage. Always maintain a distance of at least 3.94 (10 cm) between the ear cups and the cardiac pacemaker or implanted defibrillator since the product generates permanent magnetic fields. Keep the product, accessories and packaging parts out of reach of chil-
dren and pets to prevent accidents and choking hazards. Do not use the product in situations which require special attention. Preventing damage to the product and malfunctions Always keep the product dry and do not expose it to extreme tempera-
tures (hairdryer, heater, extended exposure to sunlight, etc.) to avoid corrosion or deformation. Only use attachments/accessories supplied or recommended by Sennheiser. Only clean the product with a soft, dry cloth. Unplug the power supply unit from the wall socket to completely disconnect the product from the mains power supply. Do not short-circuit the contacts of the product. Make sure that no metal objects (e.g. paper clips, hair pins, earrings) come into contact with the interfaces and contacts. Only use the base station for charging SD series headsets. Intended use/Liability The headset system can be used for calling and together with a computer
(VoIP) and/or a telephone for audio input/output and is intended for professional office or call center use. It is considered improper use when this product is used for any application not named in this instruction manual. Sennheiser does not accept liability for damage arising from abuse or misuse of this product and its attachments/accessories. The risk is to be borne by the user. Sennheiser is not liable for damages to USB devices that are not consistent with the USB specifications. Sennheiser is not liable for damages resulting from the loss of connection due to flat or overaged rechargeable batteries or exceeding the DECT transmission range. The US base stations operate on special transmission frequencies whose use is not authorized outside the United States. Do not use the SD BS US base station outside the United States. Scope of delivery and overview of the SD series Scope of delivery and overview of the SD series The SD series allows you to combine base stations (BS) and headsets (HS) to meet your needs. The listed headsets and base stations are compatible with each other. The SD series base stations marked with ML in their name are optimized for Microsoft Lync. The scope of delivery includes depending on the product purchased a base station and/or a headset with corresponding components. Base stations with components for fixed line phone and computer for fixed line phone and computer, optimized for Micro-
soft Lync for computer for computer, optimized for Microsoft Lync for fixed line phone SD BS SD BS ML SD BS USB SD BS USB ML SD BS Phone SD BS SD BS ML Safety Guide SD BS USB SD BS USB ML Manual Phone USB USB Quick Guide SD BS Phone EU/UK/US/AU Phone SD Series Setup Guide | 3 Scope of delivery and overview of the SD series Headsets with components SD Office HS monaural, with different wearing styles SD Pro1 HS monaural, with headband SD Pro2 HS binaural, with headband SD Office HS SD Pro1 HS SD Pro2 HS Quick Guide 4 | SD Series Setup Guide Product overview of the base stations Product overview of the base stations Overview of the front SD BS SD BS ML SD BS USB SD BS USB ML SD BS Phone PC button with LED Charging contacts Link LED Overview of the rear Phone button with LED Charge status LED SD BS SD BS ML SD BS USB SD BS USB ML SD BS Phone PC DC ACC Headset Phone Phone socket Handset socket ACC socket DC IN socket PC socket (USB) SD Series Setup Guide | 5 Product overview of the base stations Overview of the bottom SD BS SD BS ML SD BS USB SD BS USB ML SD BS Phone DIP switch row 1 to 6 Set button Microphone volume control ABC switch 6 | SD Series Setup Guide Setting up the base station Setting up the base station You can use the headset system with your fixed line phone and/or your computer. The base station controls the wireless communication to the headsets. Place the base station at a minimum distance of 15 cm from the fixed line phone. Connecting the base station to the mains power supply 1 Connect the connector of the power supply unit to the DC IN socket
(marked yellow). Connect the power supply unit to a wall socket. 2 SD BS, SD BS ML: The Link LED lights up red. Either the PC LED or the Phone LED lights up white. 3 SD BS USB, SD BS USB ML, SD BS Phone: The Link LED lights up red. Both the PC LED and the Phone LED light up white. 1 2 SD BS SD BS ML ACC Headset one PC DC IN 3 SD BS USB SD BS USB ML SD BS Phone Disconnecting the base station from the mains power supply If the product is not used for extended periods of time, unplug the power supply unit from the wall socket. SD Series Setup Guide | 7 Setting up the base station Connecting the base station to a fixed line phone Connection possibilities A Connection to a fixed line phone without headset socket B C Connection to a fixed line phone with headset socket Connection to an optional mechanical handset lifter Page 8 9 9 Check which connection possibility is best suited for your telephone. Follow the instructions in the corresponding chapter. A Connecting the base station to a fixed line phone without headset socket 1 Disconnect the handset cable from the telephone and connect it to the Handset socket (marked gray) on the base station. 2 Connect the telephone cable to the handset socket on the telephone and to the Phone socket (marked green) on the base station. 3 Use a pointed object (e.g. a ball pen) to set the DIP switches 1 and 2 to the position shown. 1 2 PC DC ACC Headset Phone DC IN DC ACC Headset Phone 3 8 | SD Series Setup Guide Setting up the base station B Connecting the base station to a fixed line phone with headset socket 1 Connect the telephone cable to the headset socket on the telephone and to the Phone socket (marked green) on the base station. 2 Use a pointed object (e.g. a ball pen) to set the DIP switches 1 and 2 to the position shown. 1 DC ACC Headset Phone 2 PC DC ACC Headset Phone C Connecting the base station to an optional mechanical handset lifter The Sennheiser HSL 10 mechanical handset lifter is an optional accessory available from your Sennheiser partner. The handset lifter allows you to answer calls even when you are away from your desk. Connect the base station to the fixed line phone as described in chapter A or B
. Connect the handset lifter to the ACC socket on the base station. Connect the handset lifter to the fixed line phone. For more informa-
tion, refer to the instruction manual of the HSL 10 handset lifter. ACC Headset PC DC IN PC DC ACC Headset Phone SD Series Setup Guide | 9 Setting up the base station Connecting the base station to an optional electronic hook switch control (EHS) The necessary EHS connection cables as well as adapter cables for manu-
facturer specific standards are available as optional accessories from your Sennheiser partner. The corresponding quick guides are supplied with the cables or can be found on the product page on our website at www.sennheiser.com/cco. By way of example of a Siemens and an Alcatel adapter cable, the following describes how to connect the base station to an electronic hook switch. 1 Connect the base station to the fixed line phone. 2 Use a pointed object (e.g. a ball pen) to set the DIP switch to the posi-
tion shown. Siemens, Agfeo, Aastra, Auerswald, etc. 1 2 Alcatel 1 PC DC ACC Headset Phone 2 PC DC ACC Headset Phone For an overview of the available connection and adapter cables, visit the SD series product page on our website at www.sennheiser.com/cco or contact your Sennheiser partner. 10 | SD Series Setup Guide Setting up the base station Connecting the base station to a computer Connect the USB cable to the PC socket (marked orange) on the base station and to a USB socket of your computer. The operating system detects the USB audio device Sennheiser DECT and installs the neces-
sary drivers. PC PC DC ACC Headset PC DC ACC Headset Phone Sennheiser PC software The free Sennheiser PC software allows you to add value to your Sennheiser products. The Sennheiser Updater, for example, facilitates easy updating of products with new software. For more information, visit our website at www.sennheiser.com/cco/software. SD Series Setup Guide | 11 Charging the headset Charging the headset Charge the rechargeable battery for at least 20 minutes without interrup-
tion before using it for the first time. A complete charging process takes about 60 minutes. Charging the headset using the base station Place the headset into the magnetic holder of the base station. The Headset LED lights up blue and the rechargeable battery is being charged. The Charge status LED on the base station indicates the charge status. 25% 50%
75%
100%
SD Office HS SD Pro1 HS SD Pro2 HS During the first charging process, it may take up to 5 minutes until the Headset LED lights up blue. LED segment
(white = lit up) Required charging time Corresponds to a talk time of Wideband Narrowband approx. 10 min. approx. 2 hrs approx. 3 hrs approx. 20 min. approx. 4 hrs approx. 6 hrs approx. 40 min. approx. 6 hrs approx . 9 hrs approx. 60 min. approx. 8 hrs approx. 12 hrs If the headset is outside the range of the base station, it will switch off after 30 minutes in order to conserve battery power. 12 | SD Series Setup Guide Charging the headset Charging the headset using the optional CH 10 headset charger The Sennheiser CH 10 headset charger is an optional accessory available from your Sennheiser partner. The CH 10 allows you to charge additional SD series headsets. SD Office HS SD Pro1 HS SD Pro2 HS Refer to the instruction manual of the CH 10 for more information. Charging several headsets simultaneously The MCH 7 multi USB power source is an optional accessory available from your Sennheiser partner. Together with the CH 10 USB, the MCH 7 allows you to charge up to 7 headsets simultaneously. MZH 7 CH 10 USB Refer to the instruction manual of the MCH 7 for more information. SD Series Setup Guide | 13 Testing the headset system and the sound quality Testing the headset system and the sound quality Adjusting the headset system using the DIP switches 1 Press the Link button on the headset to disconnect an existing wireless link between base station and headset. The LEDs on the headset and on the base station go off. 2 Use a pointed object (e.g. a ball pen) to set the DIP switches to the desired position. 1 2 Extra Settings dset Lifter uto Link OFF ge dard g Ran Wideban Stan Lon A d Han N ge 1 2 3 4 5 6 d HSG Limiter MSH ban uto Link O Short Ran D Narrow Fast Link A Configuring the handset lifter/hook switch DIP switches 1 and 2 The DIP switches 1 and 2 are only assigned a function on the SD BS, SD BS ML and SD BS Phone base stations. Switch position Function Manual operation Lifts/hangs up the handset manually or using the handset lifter (Sennheiser HSL 10). Electronic hook switch (DHSG standard) Call control via the headset system. For faster link establishment, see Fast Link. Electronic hook switch (MSH standard) Call control via the headset system. Fast Link for DHSG standard and HSL 10 handset lifter Recommended for frequent callers. Shorter battery life. Fast link establishment without delay due to hidden link to the base station. 14 | SD Series Setup Guide Testing the headset system and the sound quality Adjusting the radio range DIP switch 3 If many DECT systems are operated in a confined space, interference can occur. In this case, you should change the radio range. Switch position Function Standard radio range Reduced radio range Use this setting in order to avoid interference with other DECT systems Range of approx. 10 m indoors Automatically establishing the wireless link between headset and base station (Auto Link) DIP switch 4 A u t o L i n k Switch position SD Office HS SD Pro1 HS SD Pro2 HS Function Manual link establishment When taking the headset out of the base station, you have to manually establish the wireless link between headset and base station. Automatic link establishment Auto Link When taking the headset out of the base station, a wireless link is automatically established between headset and base station. Switching between wideband and narrowband audio transmission DIP switch 5 Switch position Function Wideband audio transmission Automatic frequency adjustment of wideband and narrowband calls. Wideband audio transmission is e.g. supported by Skype and gives high speech quality. Battery life: 8 hours Narrowband audio transmission Battery life: 12 hours Limiting the volume DIP switch 6 Switch position Function Standard limitation Limited volume (country specific) AU version:
in compliance with Directive AS/ACIF G616:2006 EU and US version:
in compliance with Directive 2003/10/EC SD Series Setup Guide | 15 Testing the headset system and the sound quality Adjusting the audio signal by means of the dial tone 1 Put on the headset and press the Phone button 2 Press the Link button on the headset. The Link LED lights up blue. 3 Lift the handset. You hear a dial tone. 4 Set the ABC switch to the position A, B or C so that you can hear a clear on the base station. dial tone in the headset. 1 3 2 4 16 | SD Series Setup Guide Testing the headset system and the sound quality Adjusting the volume Adjusting the microphone volume of the call transmission By default, the microphone volume control is set to position 4. This setting is suitable for most telephones. Make a call to someone who will help you find the correct sensitivity setting for your microphone. Turn the microphone volume control so that the other party can hear you at a comfortable level. Adjusting the microphone volume of the USB transmission Some softphones adjust the microphone sensitivity automatically. Activate this function in order to be able to optimally use the micro-
phone and, via your operating system, adjust the microphone sensiti-
vity so that the other party can hear you at a comfortable level (see the Help function of your operating system). Adjusting the automatic audio transmission Auto Audio With the Auto Audio function activated and in the case of a USB connec-
tion, the audio signals e.g. from Windows Media Player or iTunes are automatically transmitted to the headset. When you receive a call or when a connection to Skype is established, the audio transmission stops and you hear for example the ring tone. The Auto Audio function is activated by default. Activating the Auto Audio function Use a pointed object to press the Set button for approx. 5 seconds. The Link LED rapidly flashes blue several times. Deactivating the Auto Audio function Use a pointed object to press the Set button for approx. 5 seconds. The Link LED rapidly flashes red several times. 5s SD Series Setup Guide | 17 If a problem occurs If a problem occurs For causes and solutions that are mainly related to the headset, refer to the chapter If a problem occurs ... in the User Guide. Problem Headset is placed into the base station but the Charge status LED if off Possible cause Base station is not connected to the mains power supply Rechargeable battery is deep discharged Link between headset and base station cannot be established Bad radio link between headset and base station Base station is only connected via the USB cable Transmission range is exceeded Noise interference and connection loss Too many DECT systems within the radio range Distance between base station and fixed line phone is so small that interference occurs Headset is not properly placed into the magnetic holder of the base station Microphone sensitivity is not correctly adjusted Rechargeable battery cannot be charged Bad audio quality, the other party sounds too loud or too low Sound from the fixed line phone is distorted and disturbed Possible solution Connect the base station to the mains power supply. Wait several minutes until the Charge status LED lights up. For quick-charging the headset:
Briefly press the Set button at the bottom of the base station. Connect the base station to the mains power supply. Reduce the distance between headset and base station. Adjust the radio range. Reduce the radio range. Set the base station to narrowband transmission. Increase the distance between base station and fixed line phone. Check if the headset is properly placed into the magnetic holder. Page 7 12 7 15 15 15 12 Adjust the microphone sensitivity. 16 Base station is not adjusted to the fixed line phone. Use the ABC switch to adjust the base station to your fixed line phone. 16 For more information and an FAQ list, please visit our website at www.sennheiser.com/cco. If a problem occurs that is not listed in the above table or if the problem cannot be solved with the proposed solutions, please contact your local Sennheiser partner for assistance. To find a Sennheiser partner in your country, search at www.sennheiser.com/cco/support. 18 | SD Series Setup Guide Specifications Specifications Base station SD BS/SD BS ML Dimensions Weight Operating temperature range +5C to +45C (+41F to +113F) 20C to +70C (4F to +158F) Storage temperature range 83 x 127 x 121 mm (W x H x D) approx. 337 g SD BS USB/SD BS USB ML/SD BS Phone Dimensions Weight Operating temperature range +5C to +45C (+41F to +113F) 20C to +70C (4F to +158F) Storage temperature range 83 x 127 x 121 mm (W x H x D) aprrox. 309 g Headset SD Office HS Dimensions Weight Talk time Charging time Range
(environment dependent) 140 x 24 x 22 mm (W x H x D) with ear hook: approx. 22 g with headband: approx. 50 g narrowband: up to 12 hours wideband: up to 8 hours 50%: approx. 20 min 100%: approx. 1 hour free line of sight: up to 180 m in office buildings: up to 55 m dynamic, neodymium magnet electret microphone, noise canceling Speaker type Microphone type Operating temperature range +5C to +45C (+41F to +113F) 20C to +70C (4F to +158F) Storage temperature range SD Pro1/Pro2 HS (SD 10) Dimensions Weight Talk time Charging time Range
(environment dependent) 170 x 175 x 55 mm (W x H x D) Pro1: approx. 65 g Pro2: approx. 85 g narrowband: up to 12 hours wideband: up to 8 hours 50%: approx. 20 min 100%: approx. 1 hour free line of sight: up to 180 m in office buildings: up to 55 m dynamic, neodymium magnet electret microphone, noise canceling Speaker type Microphone type Operating temperature range +5C to +45C (+4F to +113F) Storage temperature range 20C to +70C (4F to +158F) SD Series Setup Guide | 19 Specifications Power supply unit 100 240 V~
max. 0.2 A 50 60 Hz 5.9 V max. 850 mA Nominal input voltage Nominal input current Mains frequency Nominal output voltage Nominal output current Operating temperature range +5C to +45C (+41F to +113F) 20C to +70C (4F to +158F) Storage temperature range operation: 20 to 85%
Relative humidity storage: 20 to 95%
approx. 75 g Weight US version:
DECT 6.0 EU, UK, AU version:
CAT IQ 1.0 1,880 to 1,900 MHz 1,920 to 1,930 MHz 0.196 W/kg
(max. 10 g SAR) 0.069 W/kg
(max. 10 g SAR) 0.058 W/kg
(max. 10 g SAR) 0.093 W/kg
(max. 1 g SAR) 0.044 W/kg
(max. 1 g SAR) 0.025 W/kg
(max. 1 g SAR) DECT Transmission frequency SAR value of SD Office HS SAR value of SD Pro1 HS SAR value of SD Pro2 HS 20 | SD Series Setup Guide Manufacturer Declarations Manufacturer Declarations Warranty Sennheiser Communications A/S gives a warranty of 24 months on this product. For the current warranty conditions, please visit our website at www.sennheiser.com or contact your Sennheiser partner. In compliance with the following requirements WEEE Directive (2012/19/EU) Please dispose of this product at the end of its operational lifetime by taking it to your local collection point or recycling center for such equipment. Battery Directive (2013/56/EU) The products built-in rechargeable batteries can be recycled. In order to protect the environment, please dispose of defective products with their rechargeable batteries as special waste or return them to your specialist dealer. CE Conformity R&TTE Directive (1999/5/EC) EMC Directive (2014/30/EU) Low Voltage Directive (2014/35/EU) ErP Directive (2009/125/EC) RoHS Directive (2011/65/EU) The declaration is available at www.sennheiser.com. Before putting the product into operation, please observe the respective country-specific regulations!
SD Series Setup Guide | 21 Sennheiser Communications A/S Industriparken 27, DK-2750 Ballerup, Denmark www.sennheiser.com Publ. 12/14, A03
1 | External Photos 1 | External Photos | 124.47 KiB | August 11 2019 |
D10 Phone D10 BASE Phone Front view: D10 BASE Phone Back view/holder:
Labels on BASE Phone product:
1 | External Photos 2 | External Photos | 152.15 KiB | August 11 2019 |
D 10 BASE USB:
D 10 BASE USB Front view: D10 BASE USB Back view/holder:
Label on BASE product:
1 | External Photos 3 | External Photos | 160.97 KiB | August 11 2019 |
D10 BASE USB ML:
D10 BASE USB ML Front view: D10 BASE USB Back view/holder:
Label on BASE product:
Special label for Microsoft Lync=ML
1 | External Photos 4 | External Photos | 152.23 KiB | August 11 2019 |
DW BASE EU _US _AUS_UK Front view: Back view:
FCC and WEEE logo engraved on BS: Product labels on BS:
1 | External Photos 5 | External Photos | 165.62 KiB | August 11 2019 |
DW BS ML - US Front view: Back view:
FCC and WEEE logos engraved on BS: Labels on BS:
Special label for Microsoft Lync=ML
1 | External Photos 6 | External Photos | 124.92 KiB | August 11 2019 |
DW BS USB Front view: Back view:
FCC and WEEE logos engraved on BS: Labels on Products:
1 | External Photos 7 | External Photos | 153.85 KiB | August 11 2019 |
OR BASE US Front view:
OR BASE Back view:
Labels on BASE product: CE and WEEE logo on product: Laser engrave
1 | External Photos 8 | External Photos | 155.08 KiB | August 11 2019 |
OR BS BLUE US Front view: OR BS BLUE US Back view:
CE and WEEE logo on BS: Labels on BS:
1 | External Photos 9 | External Photos | 151.44 KiB | August 11 2019 |
SD BS-US Front view: SD BS-US Back view:
USB and PHONE button Labels on BASE product:
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-11-08 | 1921.536 ~ 1928.448 | PUB - Part 15 Unlicensed PCS Base Station | Change in Identification |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2019-11-08
|
||||
1 | Applicant's complete, legal business name |
Sennheiser Communications
|
||||
1 | FCC Registration Number (FRN) |
0010808749
|
||||
1 | Physical Address |
Industriparken 27
|
||||
1 |
Ballerup, N/A
|
|||||
1 |
Denmark
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@ctcadvanced.com
|
||||
1 | TCB Scope |
A3: Unlicensed Personal Communication System (PCS) devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
R3U
|
||||
1 | Equipment Product Code |
D10BS
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J**** S****** K********
|
||||
1 | Title |
Senior Director, Quality & Support
|
||||
1 | Telephone Number |
04556********
|
||||
1 | Fax Number |
04556********
|
||||
1 |
j******@senncom.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | PUB - Part 15 Unlicensed PCS Base Station | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Dect Base Station | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Change in Identification | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter except as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Nemko AS
|
||||
1 | Name |
H******** V********
|
||||
1 | Telephone Number |
+4722********
|
||||
1 |
H******@nemko.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15D | 1921.53600000 | 1928.44800000 | 0.1060000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC