Device Real-time Status Sensor Sense-TC02 Device Real-time Status Sensor The minimum idle current The highest accuracy The first RFID with monitor Sense-TC02 real-time status sensor is new RFID technology based on independent research and development, designed for the management of equipment / instrument real-time status Features:
The minimum idle current enables the long battery life. The highest accuracy reduces the misjudgment rate Advanced anti-collision technology enables the Simultaneous management up to 500 tag/second per station The highest recognition speed enables the moving management (up to 40mile/per hour). High Security enables Data integrity and anti-crack Radio License Free Use Cases 1 Asset Management. 2 Equipments / instruments Management. 3 Production linedata collection / data analysis etc 1 2 Device Real-time Status Sensor Sense-TC02 Device Real-time Status Sensor Parameters Radio Frequency Modulation RadioRate RadioPower Radiodistance default:2425Mhz GFSK 1MbpsDefault250kbps2Mbps Default0dBm20dBm~4dBm 4dBmstep 80meters0dBm Electrical InputCurrent InputVoltage AirVoltage:
Power:
IDLECurrent WorkingCurrent BatteryLife MTTF Interface 0A~10A 110~130V60HZ / 220V~240V50HZ 8000V AC withbackupbattery
<3uA+25
<16mA 5years 5years Nationalstandardthreephasepowersocketmalehead,femalehead Environment WorkTemperature StorageTemperature Humidity 20+70 40+80
<98%(+25 Protection levels Vibration Fall 102000Hz15gThreeaxes 1000mm Type Size Weight Physical OnewayRadio 55mm35mm43.5mm 60g Shenzhen Sense Technology Co.Ltd. phone+86-755-88833238 httpwww.sense-hk.com 2 2 FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference that may cause undesired operation. interference received, including 2. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital, pursuant to Part 15 or the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may casue harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--- Reorient or relocate the receiving antenna.
--- Increase the separation between the equipment and receiver.
--- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--- Consult the dealer or an experienced radio/ TV technician for help.