FCC Rule Part: CFR 47 Part 24 Subpart D, Part 90 Subpart I, Part 101 Transmitter Certification Test Report FCC ID: SDB520X Subpart C ACS Report Number: 06-0147 Applicant: Advanced Metering Data Systems, LLC Equipment Type: Water Meter Data Transmitter Trade Name: Flexnet Model(s): 510, 520 Installation Guide(s) FIXNET APPENDIX B: REGULATORY INFORMATION:
COMPLIANCE INFORMATION:
FCC:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient of relocate the receiving antenna. Connect the equipment into an outlet or circuit different from that to which the receiver is Increase the separation between the equipment and receiver. Consult the dealer or an experienced radio/TV technician for help. connected. WARNING: Changes or modifications to this device not expressly approved by Sensus or AMDS LLC could void the users authority to operate this equipment. Industry Canada:
This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareillage numrique de la classe B rpond toutes les exigences de l'interfrence canadienne causant des rglements d'quipement. L'opration est sujette aux deux conditions suivantes: (1) ce dispositif peut ne pas causer l'interfrence nocive, et (2) ce dispositif doit accepter n'importe quelle interfrence reue, y compris l'interfrence qui peut causer l'opration peu dsire. RF Exposure:
In accordance with FCC requirements of human exposure to radiofrequency fields, the radiating element shall be installed such that a minimum separation distance of 20cm is maintained. 12 FIXNET APPENDIX B: REGULATORY INFORMATION:
COMPLIANCE INFORMATION:
FCC:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient of relocate the receiving antenna. Connect the equipment into an outlet or circuit different from that to which the receiver is Increase the separation between the equipment and receiver. Consult the dealer or an experienced radio/TV technician for help. connected. WARNING: Changes or modifications to this device not expressly approved by Sensus or AMDS LLC could void the users authority to operate this equipment. Industry Canada:
This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareillage numrique de la classe B rpond toutes les exigences de l'interfrence canadienne causant des rglements d'quipement. L'opration est sujette aux deux conditions suivantes: (1) ce dispositif peut ne pas causer l'interfrence nocive, et (2) ce dispositif doit accepter n'importe quelle interfrence reue, y compris l'interfrence qui peut causer l'opration peu dsire. RF Exposure:
In accordance with FCC requirements of human exposure to radiofrequency fields, the radiating element shall be installed such that a minimum separation distance of 20cm is maintained.