FCC ID: PEG35178-B Cordless Phone Base

SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () IMPORTANT SERVICE INFORMATION Read this manual before attempting to setup or use this instrument. It contains important information regarding safe installation and use. Keep this manual for future reference. Also save the carton, packing and proof of purchase to simplify and accelerate any needed action. If you need assistance or service, call (800) 888-8990 between 8:00 a.m. and 4:30 p.m. Pacific Standard Time, Monday through Friday. You can also visit our web site at http://www.nwbphones.com for technical support and information on our other products. WARNING To prevent fire or shock hazard, do not expose this product to rain or any type of excess moisture. If accidentally dropped into water, the AC adapter should immediately be unplugged from the wall along with the telephone line cord. THIS SYMBOL IS INTENDED TO ALERT THE USER OF THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE OWNER'S MANUAL. Excursion35178 CARTON CONTENTS Excursion 35178 Base and Handset Rechargeable Ni-Cd Battery Pack Telephone Line Cord(Short and Long) AC Adaptor Users Manual Wall Mount Screws and Hardware Warranty Card Accessory Order Form 041504A-1 1 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () SAVE THESE INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1. Read and understand all instructions. 2. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol Follow all warnings and instructions marked on the product. cleaners. Use a damp cloth for cleaning. 4. Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool. 5. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious 6. 7. damage to the product. Slots and openings in the cabinet and the back or bottom are provided for ventilation, to protect it from overheating. These openings should never be blocked or covered. The openings should never be blocked by placing the product on the bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation unless proper ventilation is provided. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power company. 8. Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by persons walking on it. 9. Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. 10. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product. 11. To reduce the risk of electric shock, do not disassemble this product, but take it to a qualified service contractor when some service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used. 12. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

A. When the power supply cord or plug is damaged or frayed. 041504A-1 2 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () B. C. D. E. F. If liquid has been spilled into the product. If the product has been exposed to rain or water. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions. Improper adjustments of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. If the product has been dropped or the cabinet has been damaged. If the product exhibits a distinctive change in performance. 13. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 14. Do not use the telephone to report a gas leak in the vicinity of the leak. INSTALLATION PRECAUTIONS 1. Never install telephone wiring during a lightning storm. 2. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. 3. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. 4. Use caution when installing or modifying telephone lines. MAINTENANCE 1. Use a damp cloth to clean the plastic cabinet. A mild soap will help to remove grease or oil. Never use polish, solvents, abrasives or strong detergents since these can damage the finish. 2. Your phone should be situated away from heat sources such as radiators, heaters, stoves or any other appliance that produces heat. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instruction. read and follow these instructions:

1. Use only the 3.6V, 350mAh, Ni-Cd battery pack .. 2. Do not dispose of the battery in a fire. The cell may explode. Check with local codes for possible special disposal instructions. 3. Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed. 041504A-1 3 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () 4. Exercise care in handling the battery in order not to short the battery with conducting material such as rings, bracelets and keys. The battery or conductor may overheat and cause burns. 5. Recharge only the battery provided with or identified for use with this product. The battery may leak corrosive electrolyte or explode if it is not the correct type. 6. Do not attempt to rejuvenate the battery provided with or identified for use with this product by heating them. Sudden release of the battery electrolyte may occur causing burns or irritation to eyes or skin. 7. When inserting the battery into this product, the proper polarity or direction must be observed. Reverse insertion of batteries can cause charging that may result in leakage or explosion. 8. Do not store this product, or the battery provided with or identified for use with this product, in high-temperature areas. Batteries that are stored in a freezer or refrigerator for the purpose of extending shelf life should be stabilized at room temperature prior to use after cold storage. 9. Disconnect telephone lines before installing batteries SAVE THESE INSTRUCTIONS FCC NOTICE The FCC requires that you be advised of certain requirements involving the use of this telephone. 1. 2. This telephone is hearing aid compatible. This equipment complies with 47 CFR Part 68 requirement. On the bottom of this equipment is a label that contains, among other information, the ACTA registration number and Ringer Equivalence Number (REN) for this equipment. If requested, provide this information to your telephone company. The REN is useful to determine the quantity of devices you may connect to your telephone line and still have all of those devices ring when your number is called. In most, but not all areas, the sum of the RENs of all devices should not exceed five (5.0). To be certain of the number of devices you may connect to your line, as determined by the REN, you should call your local telephone company to determine the maximum REN for your calling area. If your telephone causes harm to the telephone network, the telephone company may discontinue your service temporarily. If possible, they will notify you in advance. But if advance notice is not practical, you will be notified as soon as possible. You will be advised of your right to file a complaint with the FCC. 3. 4. 5. Your telephone company may make changes to its facilities, equipment, operations or procedures that could affect the proper operation of your equipment. If they do, you will be given advance notice so as to give you an opportunity to maintain uninterrupted service. If you experience trouble with the telephone, please contact VTC Service & Manufacturing Co., Inc 6. 041504A-1 4 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () at (800) 888-8990 or write to: VTC Customer Service, 16988 Gale Ave., City of Industry, CA 91745 for repair/warranty information. The telephone company may ask you to disconnect this equipment from the network until the problem has been corrected or you are sure that the equipment is not malfunctioning. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs. (Contact your state public utility commission or corporation commission for information.). 7. 8. USOC jack type is RJ11C and the compatible jack is part 68 compliance. NOTICE: If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this [equipment ID] does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is needed.

Consult the dealer or an experienced radio/TV technician for help. 041504A-1 5 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and, (2) his device must accept any interference received, including interference that may cause desired operation. Privacy of communications may not be ensured when using this phone. Changes or modifications not expressly approved in writing by Northwestern Bell Phones may void the user's authority to operate this equipment. Some cordless phones operate at frequencies that may cause interference to nearby TVs and VCRs;

to minimize or prevent such interference, the base of the cordless phone should not be placed near or on top of a TV or VCR; and, if interference is experienced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference. AC ADAPTOR: Use only with Class 2 Transformer, 12 VDC output , 500mA, center pin positive. 041504A-1 6 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () Excursion 35178 CONTROLS DIAGRAM LCD Display CALLS Button DN

MENU/OPTION Button Button Button PLAY ERASE OGM REPEAT STOP SKIP HELP TALK Button Button MSG WTG/

NEW CALL LED Indicator SCAN/REMOTE Button UP Handset Jack TONE(*)/

Button FLASH/EDIT Button SA/PHONE BOOK Button RE/PA/DEL Button 041504A-1 7 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () Base Unit

(RearView) D I G I T A L A N SWERING SYSTE M TIME SET CODE NE W M SG IN USE C HA R GE MEMO VOL ERASE ANS. ON/OFF OGM VOL REPEAT PAGE P LAY /ST OP SKIP NEW MSG LED Indicator CODE Button Time Set Button Erase Button ANS ON/OFF Button Repeat PAGE Button Button Base Units Antenna Button IN USE LED Indicator

/CHARGE LED Indicator MEMO Button VOL UP VOL DOWN Button OGM Button SKIP PLAY/STOP Button TS/5R /3R DC 12V 500mA LINE TONE PULSE TS/5R/3R Switch DC 12V Jack LINE Jack TONE/PULSE Switch 041504A-1 8 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () DESCRIPTIONS Handset Controls-Cordless Telephone LCD Display - Shows call information, phone status, prompts and Phonebook items. MSG WTG /NEW CALL Indicator - Red LED blinks when you have new message(s) and call(s). TALK Button - Press this button to place a call, answer a call, or end a call. SA/PHONE BOOK Button Saves the changes on the listed items. Allows you to retrieve a memory(name and phone number)for the personal Phonebook (up to 20 memories). TONE * /

FLASH/EDIT Button - (FLASH)Momentarily hangs up the phone to access custom calling features such as Call waiting or Three-way calling provided by you local phone company. (EDIT) Press to edit listed items. Button - Press to move right on the large LCD Display. Button - Press to move left on the large LCD Display. Button - Allows you to adjust the handset volume(3 steps) in TALK mode. It also or DN UP allows you to view the caller list or /and Phone. Microphone -Used for speaking with callers. Headset Jack A jack located on the side of the handset used for connecting your headset to enjoy a hands-free communication. RE/PA/DEL(Redial/Pause/Delete) Button (Redial)Press to redial the last number you dialed.(Pause)Press to insert pause while dialing. (Delete)Press and hold down to delete items. Calls Button - Press to see the caller list. SCAN Button It is used to manually select one of the 40 operating channels when you experience interference on the handset. 041504A-1 9 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () Erase Button OGM Button SKIP Button Play Button Repeat Button Help Button Stop Button MENU/OPTION While in standby mode, this button allows you to set the handset in Programming mode. During you view the caller list, press to place a long distance call or to place a local call. Receiver Allows you to hear calls. Handset Controls-Answering System REPEAT ERASE STOP PLAY SKIP OGM HELP OGM Button - Press to record Outgoing Message (OGM). PLAY Button - Press to playback incoming Message(s) (ICM) or MEMO Message(s). REPEAT Button - Press to skip to the previous message during playback. SKIP Button - Press to skip to the next message during playback. STOP Button - Press to stop current activity. ERASE Button - Press to erase message REMOTE Button Allows you to access most of the Excursion35178s functions away from the base unit using the handset. Also press to listen to the caller leave their incoming Message (ICM) in order to let you decide if you want to answer the call. 041504A-1 10 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () HELP Button - Press to access voice help menu

.BASE UNIT CONTROLS:

Base Antenna - A fixed antenna. Base Unit Charge Terminals - Used for charging handset batteries. We recommend that you clean these contacts periodically with an alcohol-moistened cloth or cotton swab. IN USE /CHARGE LED Indicator -Lights up steadily when the phone is in talk mode and turns off when the handset is not in use. Lights up steadily when paging the handset. Lights up steadily when the handset is being charged on the base and turns off when the handset is removed from its cradle. NEW MSG LED Indicator Flashes rapidly if the system has new call message(s) and have message(s) in your voice mailbox. Lights up to indicate the presence of Memo message and blinks if there are new Memo messages(s). Lights up to indicate the presence of incoming Message(ICM) and blinks if there are new incoming Message(s) (ICM). PAGE Button - Allows you to locate the handset when it is not on the base, or to alert the person near the handset. Volume Control UP PLAY/STOP to stop current activity. ANS. ON/OFF Press to activate or deactivate answer function. REPEAT SKIP ERASE Button Press to erase a single message or all messages in order to conserve message space in memory. Memo Button Press to record Memo message. Button Press to play back the incoming Message(s)(ICM) and Memo message(s) or Button Press to skip to the next message during playback. Button Press to skip to the previous message during playback. Button -Adjusts the base unit speaker volume level.. or DN 041504A-1 11 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () OGM Button Press to record Outgoing Message(OGM). TIME SET Button Press to set the day and time stamp. CODE Button Press to set the password for remote operation. Ring (TS/5R/3R) Switch -Allows you to select the appropriate dialing service. TONE for tone dialing or PULSE for rotary service.. TONE/PULSE Switch - A switch located on the rear of the base unit, which allows you to set the dialing mode to either Tone dialing or Pulse(rotary) dialing. DC 12V jack - A jack located on the rear side of the base unit used for connecting the AC adaptor to the base unit. TEL LINE jack Accepts line cord to make connection with modular type telephone outlet. INSTALLATION CAUTION:USE ONLY THE NICKEL CADMIUM(Ni-Cd) BATTERY TYPE INCLUDED WITH THIS UNIT. USE OF OTHER BATTERY TYPES MAY CAUSE INJURIES OR DAMAGE. Battery Installation 1. Remove the battery compartment cover of the handset by pressing the top of the cover and sliding it 2. Connect the Ni-Cd battery pack plug along the slot into the handsets battery connector as shown down. below. Handset Battery Compartment Red wire Black Wire Battery Connector

(Figure 1) 041504A-1 12 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () Belt clip hook Insert the Ni-Cd battery into the battery compartment. 3. 4. Replace the battery compartment cover by sliding it up towards the handset. NOTE: Use the type and size of Ni-Cd battery pack, 3.6V, 350mAh. It is recommended that the Ni-Cd battery pack should be fully charged overnight prior to initial use. Belt Clip Installation With the back of handset facing up, insert one side of the belt clip hook into the matching slots at the top side of handset as shown in Figure2. Slide the other hook until it locks into place from the opposite side of the handset. WALL USE:

Wall Mounting (Standard Wall Jack) 1. 2. Connect the short telephone line cord to the TEL LINE jack.. 3. Connect the opposite end of the telephone line cord to the modular wall jack. 4. Align the wall mounting slots with studs located on the modular wall plate and slide base down to Install the wall mount bracket at the position as shown in Figure 3.

(Figure 2) lock in place. Base Unit

(Side View) Wall Mount Bracket Wall Mount Stud Telephone Modular Jack Wall Mount Stud

(Figure 3) 041504A-1 13 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () shown in Figure 4. Wall Mounting (No Standard Wall Jack) 1. Drill two holes with a vertical distance between the two marked positions of 315/16100mmas

. 3 15/1655

(100mm)

(Figure 4) 2. Drive a screw into each of the holes. Tighten them to the end of the screw lines, only leaving the smooth part of the screw head outside the wall. 3. Hand the unit onto the screws, then slide it down firmly to fasten the base securely. Uninstalling the Wall Mount Bracket To remove the wall mount bracket from the base unit, pull it front as shown in Figure 5 POWER CONNECTION

(Figure 5) CAUTION: You must use a Class II, 120 Volt AC/12 Volt DC adaptor that delivers at least 500mA. Insert the small plug inot the DC 12V jack on the rear of the base unit as shown in Figure 6. The center tip must be positive and the plug must correctly fit the units DC 12V jack. 1. Plug the AC adaptor into a standard AC outlet. 2. 041504A-1 14 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () TS/5R /3R LINE DC 12V 500mA Base Unit

(Figure 6) AC Outlet DC 12V Jack 12VDC Adaptor AC Adaptor Plug HEADSET CONNECTION One of the special features of your phone is that your handset could utilize a headset(not included) for hands-free communication. Insert the small plug at the end of your headset cord to the headset jack at the side of the handset as shown in Figure 7. Follow the procedures discussed in Placing a Call when to place and receive a call. Note: The headset jack of your cordless telephone is compatible with 2.5mm headset plugs only. When you plug in the headset into the headset jack, it automatically mutes the microphone and speaker of the handset. Unplug the headset to return the handset to normal use. INITIAL SETUP Please follow these steps before using the cordless telephone for the first time. 1. Ensure that the handset battery pack is installed and charged fully for at least 14 hours. Handset Jack

(Figure 7) 041504A-1 15 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () 2. Ensure that all connections(line cord and adaptor cord) are properly inserted into rear of the base unit. SETTING THE TONE/PULSE MODE Select the appropriate dialing service by moving the TONE/PULSE switch at the rear of the base unit:

TONE for Tone service , or PULSE for Rotary service. SETTING THE HANDSET RINGER ON/OFF MODE The handset must be set to ring ON mode in order to ring when receiving an incoming call. See Programs Operation section on RING ON/OFF SETTING. TELEPHONE OPERATION PLACE A CALL 1. Pick up the handset and press the TALK button. The Call Timer starts to count. The base unit IN USE LED indicator will light up. Listen for a dial tone. 2. 3. Dial the telephone number. The phone numbers appear on the LCD Display as you enter the number. 4. When finished with your call, press the TALK button or place the handset on the base unit. The base IN USE LED indicator will turn off. NOTE: The call timer will start to count once you press the TALK button. RECEIVE A CALL NOTE: If you are expecting incoming calls, the handset must be programmed to RING ON mode. If the handset is on the base:

1. When the phone rings, simply pick up the handset from the base cradle if the unit is set to auto-answer ON mode. If the unit is set to auto-answer OFF mode, press the TALK button. See the AUTO ANSWER ON/OFF SETTING section to set auto-answer mode. The LCD Display will show TALK. Start your conversation. To end your conversation, either press the TALK button or place the handset on the base unit. The base IN USE LED indicator will turn off. 2. 3. If the handset is out of the base:

1. When the phone rings, press the TALK button on the handset. The LCD Display will show TALK 041504A-1 16 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () 2. 3. and the base unit IN USE LED will light up. Start your conversation. To end your conversation, either press the TALK button or place the handset on the base unit. The base IN USE indicator will turn off. LAST NUMBER REDIAL A. AFTER HEARING A BUSY TONE WHEN PLACING A CAL. If you get a busy tone, press handset TALK button to hang up. 1. Press the handset TALK button again and listen for a dial tone. 2. Press the handset RE/PA/DEL button. This will automatically redial the last telephone number you 3. called (up to 32 digits). 4. When finished with your call, press the TALK button or place the handset on the base unit. The base IN USE LED indicator will turn off. B. WHEN THE HANDSET IS OFF THE BASE UNIT AND IN STANDBY MODE 1. 2. Press the TALK button on the handset and listen for a dial tone. Press the RE/PA/DEL button. This will automatically redial the last telephone number you called

(up to 32 digits). 3. When finished with your call, press the TALK button or place the handset on the base unit. The base IN USE LED indicator will turn off. SAVING IN THE PHONEBOOK 1. 2. 3. Use the TELEPHONE KEYPAD button(0-9) to enter the name, (see the TELEPHONE KEYPAD Press the SA/PHONE BOOK button. Press the FLASH/EDIT button. 4. 5. or DN button once. CHARACTERS SETTING section ) you can store up to 15 characters. Press the UP Enter the telephone number using the TELEPHONE KEYPAD button(0-9). You can store up to 16 digits. Press the SA/PHONE BOOK button to SA into memory Press the SA/PHONE BOOK button to go back to standby mode. 6. 7. NOTE: If there are no memory locations left in the phonebook, the unit will display MEMORY FULL. To continue with memory programming, you must delete or edit existing speed dial numbers. If no active buttons are pressed for 20 seconds, the LCD Display will automatically return to STANDBY mode. It will not save a duplicate telephone number or a name without the corresponding telephone number in the Phonebook. 041504A-1 17 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () VIP or DN JOHN SMITH button to find the one you need. 888-555-1212

#1 TOTAL20 Press the SA/PHONE BOOK button. Press the UP Press the MENU/OPTION button once. The LCD Display will show VIP. Press the SA/PHONE BOOK button to save the preferred call and go back to STANDBY mode. A. PREFERRED CALLS(VIP) You an assign PREFERRED CALL which will generate a special ringer sound at start of the second ring to any welcome caller in the Phonebook. 1. 2. 3. 4. B. BLOCKED CALLS You can assign a BLOCKED CALL which will disable the ringer sound from the second ring to any caller in the Phonebook. 1. 2. 3. 4. TELEPHONE KEYPAD CHARACTERS The TELEPHONE KEYPAD buttons(0-9) are used to enter the characters when entering names. Press the appropriate KEYPAD button to get the following characters. Press the SA/PHONE BOOK button. Press the UP Press the MENU/OPTION button twice. The LCD Display will show REJ. Press the SA/PHONE BOOK button to save the preferred call and go back to STANDBY mode. REJ JOHN SMITH 888-555-1212

#2 TOTAL20 button to find the one you need. or DN 041504A-1 18 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () CHARACTERS 1 2 3 4 5 6 7 8 9 0 KEYPAD BUTTON Space & , ( ) * . 1 A B C 2 D E F 3 G H I 4 J K L 5 M N O 6 P Q R S 7 T U V 8 W X Y Z 9 0 For example, If you want to enter the character C , press the 2 KEYPAD button, the first character displayed will be A . Press the 2 button again to display B, and press again to display the letter C. To enter the next character, press the appropriate button. If ,however , the next character is on the same button as the previous character, you will first need to press the SHIFT RIGHT button. Pressing button a second time will produce a space. If you want to change any character, the SHIFT RIGHT button. To delete the you can go back to the incorrect character by pressing the SHIFT LEFT character inside the cursor VIEWING THE PHONEBOOK This Phonebook lets you scroll through the list to find the person you need for one touch dialing. You can store up to 20 names and telephone numbers in the Memory. 1. 2. PHONE BOOK TOTAL 20 button to find the one you need , press the SHIFT RIGHT Press the SA/PHONE BOOK button. Press the UP if the name or telephone number is more than 11 digits.

, press the RE/PA/DEL button. No. of memory store button or DN 041504A-1 19 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () ALEX BROWIN 6045551212 ALEX BROWIN 6045551212 NOTE: To exit the Phonebook at anytime, Press the SA/PHONE BOOK button. EDITING NAME AND NUMBER IN THE PHONEBOOK 1. 2. 3. 4. Press the SA/PHONE BOOK button. Press the UP Press the EDIT /FLASH button to edit the name. ALEX BROWIN 6045551212 button to find the one you want to edit. cursor is blinking or DN or RIGHT Press the SHIFT LEFT want to change. To erase, press the RE/PA/DEL Button To add, use the TELEPHONE KEYPAD buttons(0-9). Press the DN Press and hold the SHIFT LEFT want to change. To erase, press and hold the RE/PA/DEL button. To add, use the TELEPHONE KEYPAD buttons(0-9). button to edit the number. or RIGHT 5. 6. button to move the cursor to the letter or number you button to move the cursor to the number you ALEX BROWIN 6045551212 7. IMPORTANT: It is not advisable to save a telephone number without the corresponding name in the Press the SA/PHONE BOOK button to confirm. cursor is blinking 041504A-1 20 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () Phonebook. This will lead to improper displays on Private and Out of Area calls. NOTE: When no active buttons are pressed for 20 seconds, the LCD Display will automatically return to STANDBY mode. or DN button to find the one you want to call. Press the SA/PHONE BOOK button. Press the UP Press the TALK button to dial out the telephone number. Start your conversation. To end your conversation, either press the TALK button or place the handset on the base unit. PLACING CALLS FROM THE PHONEBOOK 1. 2. 3. 4. 5. NOTE: Be sure to check that the line is not in use by another extension. DELETING A STORED NUMBER 1. 2. 3. Press the SA/PHONE BOOK button. Press the UP Press the RE/PA/DEL button. The unit will ask you to delete the selected telephone number and the LCD Display will show EARSE ITEM?. button to find the one you want to delete. or DN 604-555-1212 ERASE ITEM?

#1 TOTAL20 4. 5. MIXED MODE DIALING (Temporary Pulse to Tone Dialing) 1. Press again the RE/PA/DEL button to delete. The LCD Display will show ERASED. Press the SA/PHONE BOOK button to return to STANDBY mode. If you only have pulse (rotary dialing) service in your area and want to access Tone services (Bank by Phone , etc.), ensure that the Tone/Pulse switch on the rear of the base unit is set to the Pulse position. Press the TONE(*) button once to switch from Pulse to Tone dialing temporarily. Pulse dialing mode resumes when the call is ended. 2. PAUSE FUNCITON In some cases, such as PABX or long distance service, a pause may be needed in the dialing sequence. Pressing the handset RE/PA/DEL button inserts the programmed time interval between dialed numbers. 041504A-1 21 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () FLASH FUCTION Used to access custom calling features such as Call Waiting or Three-Way Calling provided by your local phone company. Flash can also be used to restore a dial tone to make a new call. CHANNEL SELECTION(40 Channels) Your cordless telephone lets you select a channel from the 40 frequencies available to transmit signals between the base unit and handset. If the existing channel becomes noisy or starts having interference, you can either move closer to the base unit or press the SCAN/REMOTE button on the handset until a better reception is found. OUT OF RANGE WARNING The handset and base unit communicate up to a certain maximum range. The distance can be affected by weather, power lines, or even other cordless telephone. If you are far away from the base unit, the handset beeps and OUT RNAGE is shown on the LCD Display to warn you that the background noise level is too high for proper communication between the handset and the base unit. When you hear this sound and see the OUT RANGE display, you should move closer to the base unit. Otherwise, the call will automatically cut off after 20 seconds. Return the handset on the base cradle to charge. LOW BATTERY WARNNIG When the handset battery voltage level is low, the handset LCD Display shows LOW BATTERY. PAGING FUNCTION If you have misplaced the handset or need to alert person nearly the handset, press the PAGE button on the base unit. Each press of this button will activate the handset to beep for 20 seconds and LCD Display shows PAGING while it is being paged by the base unit. NOTE: Even if the handset is in RING OFF mode, the base unit can page the handset. CALLER ID OPERATION GETTING TO KNOW YOUR NEW PHONE IMPORTANT: Subscription to Caller ID (CID)/Call Waiting ID services from your local phone company is required for using the Caller ID/Call Waiting ID features of the Excursion 35178. Your new Excursion 35178 telephone gives you the ultimate in cordless telephone sound quality with the luxury of Caller ID and Call Waiting ID. 041504A-1 22 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () If this is your first cordless telephone, you will soon discover that your cordless is similar to regular telephones, except without the cord. If you have owned a cordless in the past, you will discover that the Excursion 35178 telephone is the most powerful and full-functioned Call Waiting ID cordless telephone on the market, some key features are:

40 name and number Caller ID/Call Waiting ID memory(Call List) 20 name and number programmable memory (Phonebook) Hearing aid compatibility Automatic or manual selection of the clearest of 40 channels Unlike regular telephones, your cordless telephone does not work during power failures. We do not recommend you to use a cordless telephone as the only phone in your residence INTRODUCTION TO CALLER ID AND CALL WAITING ID The Excursion 35178 Caller ID/Calling Waiting ID devices allow you to take advantage of the Caller identification delivery service offered by your local telephone company. For more information, you can refer to the following Question and Answer table:

QUESTIONS What is Caller ID?

ANSWERS Caller ID is a device that identifies the calling party before you answer a call. This device can be used to screen unwanted calls and eliminate harassment from annoying calls. What is Caller Waiting ID? Call Waiting ID is a device that can also identifies the call waiting How does Caller ID and Call Waiting ID work?

Who provides Caller ID service?

How can I activate my Caller ID?

party before you answer a call. When used with Caller ID/Call Waiting service, the Caller ID/Call Waiting ID device displays the name(if available), and the telephone number (if available) of the person calling before you answer your telephone. Your local telephone company. However, not all local telephone companies provide Caller ID service. Please call you local phone company to confirm that the service is available before you install the device. For you Caller ID unit to function, you must first arrange with your local telephone company to have Caller ID/Call Waiting ID service installed on you line. There is an extra charge added to your monthly telephone bill for this service. Before using this unit, please read this instruction manual carefully. 041504A-1 23 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () RECEIVING NEW CALL When you receive a new call, the call information is stored under CALLER ID List. The NEW segment of LCD Display and MSG WTG/NEW CALL LED indicator will flash if there is new call(s). When you receive a call, the system displays the caller information sent by the telephone company, called a Call Record. The Call Record consists of the following information:

The callers name(if available) The callers telephone number The time and date of a call a. b. c. d. A call record number If there is no call records, the LCD display shows NO CALLS. JOHN SMITH 555-555-1212 10:00 AM 12/15 NEW #8 VIEWING THE CALLER ID LIST 1. In standby mode, press CALLS button to enter Caller ID list. If there is new call(s), the new call(s) will be displayed at first. If the name or number is more than 11 characters, press the SHIFT RIGHT button to view the rest of the display. Time Month/Date ALEX BROWIN 6045551212 ALEX BROWIN 6045551212 Number of calls recorded or DN Press the UP calls from the last call received to the first. The UP the first call received to the last. Press CALLS button to finish. button to scroll to the next call. The DN button will go through the button will allow you to view the calls from 3. NOTE: If no active buttons are pressed for 20 seconds, the LCD Display will automatically return to STANDBY mode. 041504A-1 24 2. SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () 555-555-1212 8:05AM 12/25 #38 UNAVAILABLE

11:23AM 12/25 #20 PRIVATE

11:23AM 12/25 #40 JOHN SMITH 555-555-1212 8:05AM 12/25 #38 CALLER ID DISPLAY MSG RING: ON 9:07AM 12/25 NEW0 TOTAL39 ERROR 9:07AM 12/25 NEW2 TOTAL8 VIP JOHN SMITH 888-555-1212 9:07AM 12/25 NEW1 TOTAL10 NO CALLS 9:07AM 12/25 NEW0 TOTAL0 LCD Display shows name and number, time and date of the call. LCD Display shows number-only service. UNAVAILABLE will be displayed when Caller ID information is not available. This call was made from a telephone company that does not offer Caller ID services(including international calls). PRIVATE will be shown when a call is received from a blocked number. For privacy reasons, some states allow callers the option to prevent their telephone data from being displayed on the other partys Caller ID display. Display shows when the Caller ID information was received incorrectly or only part of the data was received. NOTE: When an error is received, none of the date from This call is SAd in memory Display shows when a voice mail message has been received and is stored by message waiting service provided by the phone company. Display shows when the incoming call is a priority call. This is displayed when CALLS button is pressed and there is no Caller ID date stored. 041504A-1 25 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () NOTE: If a call is received from the same number more than once since the records were last viewed, no new entry is made, but the repeat call icon RPT and the number of repeat calls is displayed. CALL WAITING When you subscribe to Call Waiting service from your local telephone Company, this telephone will display the name and number of the second caller while you are having a conversation. 1. When a second call comes in while you are having a conversation, you will hear a notification tone from the handset and volume is momentarily muted. The LCD Display will automatically shows the name and number of the second caller. Press the FLASH /EDIT button to answer the second caller. The first callers name and number will be displayed. 2. 3. When you have finished, press the FLASH/EDIT button to continue with your conversation with the first caller. 1ST CALLER 2ND CALLER JIM CARRY 800-2-10-8950 800-2-10-8950 00MIN 18 SEC 00MIN 18 SEC ALEX BROWN MESSAGE WAITING If you have subscribed to Voice Mail message service and if you have requested Visual Message Indication from your local telephone company, the MSG WTG/NEW CALL LED indicator will blink and the LCD Display will show MSG when there is voice message(s) for you from your telephone company. To remove the MESSAGE WAITING indicator, see the Message Waiting Setting section. PLACING A CALL FROM THE CALLER LIST 1. 2. 3. Press the CALLS button. Press the button or If the number displayed is not correct(needing 7,10,11 digits), press the OPTION button to select call number. MSG RING: ON 9:07AM 12/25 NEW0 TOTAL39 button to select the call record you wish to call back. 041504A-1 26 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () JOHN SMITH 555-555-1212 9:07AM 12/25 #8 Press OPTION button JOHN SMITH 555-1212 9:07AM 12/25 #8 Press OPTION button JOHN SMITH 15555551212 9:07AM 12/25 #8 Press TALK button to dial out or press CALLS button to cancel dialing. To end you conversation, either press the TALK button or place the handset on the base unit. 4. 5. SAVING THE NAME AND NUMBER FROM THE CALLER LIST INTO PHONE BOOK 1. 2. 3. 4. NOTE: When call records with 10 digits is stored in the phonebook, a 1 is inserted in front of the number. If you must dial out a 10-digit number for local calls, you must edit the number to exclude that digit to dial out correctly. SELECTIVE DELETING IN THE CALLER LIST 1. 2. 3. 4. Press the CALLS button. Press the UP or DN Press SA/PHONE BOOK button. The LCD Display shows SAVE. Press CALLS button to return to standby mode. Press the CALLS button Press the UP or DN Press RE/PA/DEL button. The LCD Display will show ERASE ITEM?

To delete the selected call record, press RE/PA/DEL button. button to scroll to the call record you wish to delete. 555-1212 10:00AM 12/25 #6 ERASE ITEM?

button to scroll to the call record you wish to store into the phonebook. 041504A-1 27 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () Press the CALLS button to return to STANDBY mode. 5. DELETING ALL RECORDS IN THE CALLER LIST 1. 2. 3. Press the CALLS button. Press and hold RE/PA/DEL button. The LCD Display will show ERASE ALL?

To delete all Caller ID records, press RE/PA/DEL button. The LCD Display will show ERASE ALL and return to standby mode. ERASE ALL?

555-1212 10:00AM 12/25 #6 PROGRAMS OPERATION This unit contains the following special Programs:

A. LANGUAGE B. FIRST RING ON/OFF C. TIME SET D. AREA CODE E. CONTRAST A. RING ON/OFF A. LANGUAGE F. MSG WAITING G. AUTO ANSWER ON/OFF H. PRIVATE RING ON/OFF I. UNAVAILABLE RING ON/OFF J. RING ON/OFF This telephone offers English, Spanish and French languages for your convenience. 1. Press and hold the MENU/OPTION button. 2. Press the TELEPHONE KEYPAD #1 button. 3. Press the FLASH/EDIT button. 4. Press the UP language. or DN 5. Press the SA/PHONE BOOK button to save the setting. 6. Press the MENU/OPTION button to go back to standby mode. ENGLISH

#1 TOTAL10 button to select the language you desire. English is the preset B. FIREST RING ON /OFF You can turn off the first ring of the telephone so that it does not ring until caller ID information has been displayed. 1. Press and hold the MENU/OPTION button. 2. Press the TELEPHON KEYPAD #2 button. FIRST RING On

#2 TOTAL10 041504A-1 28 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () 3. Press the FLASH/EDIT button. 4. Press the UP or DN button to select the ON or OFF. FIRST RING ON is the preset mode. 5. Press the SA/PHONE BOOK button to save the setting. 6. Press the MENU/OPTION button to go back to standby mode. C. TIME SET Set the date and time. 1. Press and hold the MENU/OPTION button. 2. Press the TELEPHONE KEYPAD #3 button. 3. Press the FLASH/EDIT button. 4. Use the TELEPHONE KEYPAD button to enter the month, date, hour and minute. The cursor moves automatically after entering each item. Press the TELEPHONE KEYPAD #1 for AM setting, or Press the TELEPHONE KEYPAD #2 for PM setting. 10:03 AM 12/25 #3 TOTAL10 TIME SET 5. When the final setting is programmed, the time and date are automatically saved. 6. Press the MENU/OPTION button to go back to STANDBY mode. NOTE: The date and time will automatically set, if you have subscribed to the Caller ID service from your local telephone company. AREA CODE

#4 TOTAL10 D. AREA CODE 1. Press and hold the MENU/OPTION button. 2. Press the TELEPHON KEYPAD #4 button. 3. Press the FLASH/EDIT button. 4. Use the TELEPHONE KEYPAD buttons to enter the three digit area code. 5. Press the SA/PHONE BOOK button to save the setting. 6. Press the MENU/OPTION button to go back to standby mode. E. CONTRAST This unit enables you to select 3 brightness levels for the Large LCD Display. 1. Press and hold the MENU/OPTION button. 2. Press the TELEPHON KEYPAD #5 button. 3. Press the FLASH/EDIT button. 4. Press the UP or DN button to adjust the brightness of the display. Level 2 is the preset brightness. 041504A-1 29 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () CONTRAST 2 5. Press the SA/PHONE BOOK button to save the setting. 6. Press the MENU/OPTION button to go back to standby mode. F. MSG WAITING (Message Waiting) To turn off the Message Waiting LCD/LED indicator. 1. Press and hold the MENU/OPTION button. 2. Press the TELEPHON KEYPAD #6 button. 3. Press the FLASH/EDIT button. 4. Press the SA/PHONE BOOK button, the Message Waiting LCD/LED indicator turn off. 5. Press the MENU/OPTION button to go back to STANDBY mode. MSG WAITING

#5 TOTAL10

#6 TOTAL10 delete IMPORTANT: Message Waiting LCD/LED indicator will automatically turn on, If you have subscribed to Voice Mail message service and if you have Visual Message indication from your local telephone company. G. AUTO ANSWER ON/OFF Turn on or off the auto answer feature. When in on mode, the phone will automatically answer an incoming call if the handset is lifted from the base unit. 1. Press and hold the MENU/OPTION button. 2. Press the TELEPHON KEYPAD #7 button. 3. Press the FLASH/EDIT button. 4. Press the UP AUTO ANSWER ON is the preset mode. button to select ON or OFF. AUTO ANSWER

#7 TOTAL10 or DN On 5. Press the SA/ PHONE BOOK button to save the setting. 6. Press the MENU/OPTION button to go back to STANDBY mode. H. PRIVATE RING ON/OFF Turn on or off ring or all calls where the caller has blocked their caller ID. 1. Press and hold the MENU/OPTION button. 2. Press the TELEPHON KEYPAD #8 button 3. Press the FLASH/EDIT button. 4. Press the UP PRIVATE RING ON is the preset mode. button to select ON or OFF. or DN RRIVATE RNG On

#8 TOTAL10 5. Press the SA/PHONE BOOK button to save the setting. 6. Press the MENU/OPTION button to go back to standby mode. NOTE: The phone will ring once when set to OFF mode unless first ring is set to OFF mode. 041504A-1 30 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () I. UNAVAILABLE RING ON/OFF Turn on or off ring or all calls where the caller has blocked their caller ID. 1. Press and hold the MENU/OPTION button. 2. Press the TELEPHON KEYPAD #9 button 3. Press the FLASH/EDIT button. 4. Press the UP UNAVAIL RING ON is the preset mode. button to select ON or OFF. or DN UNAVAIL RNG On

#9 TOTAL10 5. Press the SA/PHONE BOOK button to save the setting. 6. Press the MENU/OPTION button to go back to standby mode. NOTE: The phone will ring once when set to OFF mode unless first ring is set to OFF mode. J. RING ON/OFF To turn on or off the ringing sound. button once. 1. Press and hold the MENU/OPTION button. 2. Press the DN 3. Press the EDIT/ FLASH button. 4. Press the UP 5. Press the SA/PHONE BOOK button to save the setting. 6. Press the MENU/OPTION button to go back to standby mode. or DN RING ON

#10 TOTAL10 button to select ON or OFF. RING ON is the preset mode. ANSWERING MACHINE OPERATION The Excursion35178 features a sophisticated Digital Answering System. Incoming Messages(ICMs), Outgoing Message(OGM) and Memo messages are stored electronically into digital memory. Messages are accessed instantly and arranged compactly in this memory. The Excursion35178 can store 15 minutes of message(ICMs, OGM and Memos Combined). NOTE: The maximum incoming Message(ICM) recording time is 1 minutes. VOICE MENU SYSTEM A sophisticated Voice Menu System has been designed and pre-programmed into the Excursion35178. This system will verbally guide you through key operational procedures. TIME/DAY STAMP ICMs and Memo messages are automatically voice-stamped with the current time and day. NOTE: After power failure, the time/day stamp will be lost. In this case, the time will be incorrect. Please refer to the INITIAL SETUP section on how to set the system time and day. 041504A-1 31 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () SETTING ANSWER ON/OFF The unit defaults to Answer ON automatically after power up. A. TO TURN ANSWER MODE OFF 1. In standby mode, press the ANS. ON/OFF button on the base unit until you hear Answering machine is off . 2. The Excursion35178 will announce Answering machine is off . NOTE: The Excursion35178 will answer after the 11th ring if the Answering Mode is OFF. B. TO TURN ANSWER MODE ON 1. In standby mode, press the ANS. ON/OFF button until you hear Answering machine is on . C. TO TURN ANSWER MODE A 1. In standby mode, press the ANS. ON/OFF button until you hear Answering machine is A. Note: THE Excursion35178 will automatically ring a beep, And then will automatically hang up after seven seconds. SETTING THE RINGS SWITCH(TS/5R/3R) The number of rings before the answering system answers a call be selected by setting the RINGS switch on the base unit to :

TS Toll Saver 5 - Five rings 3 - Three rings Toll saver lets you avoid unnecessary toll charges when calling long distance to remotely retrieve your messages. The Excursion35178 can be set to answer the first call on the 5th ring, and all subsequent calls on the 3rd ring by setting the RINGS switch on the Toll Saver (TS) position. If your Excursion35178 fails to answer on the 3rd ring , then you know that you do not have any new incoming Message(s)(ICM). You can hang up before the unit answers and save the cost of the call. SETTING TIME/DAY 1. Press TIME SET button. You will hear current Time/Day setting the time and day. 2. Press and hold TIME SET button for about 3 seconds. You will hear Sunday. 3. Press SKIP 4. Press TIME SET button to confirm and then set the hours. You will hear 12 as the 12 is button (on the base) until the correct day is announced. or REPEAT 5. Press SKIP button to reverse the hour show in the display. 6. Press TIME SET button to confirm and then set the minutes, you will hear 00 as the 00 is button to advance or REPEAT 7. Press SKIP button to increment or REPEAT button to decrement the minute in the displayed in message counter. displayed in message counter. display. 8. Press TEME SET button to confirm. You will hear AM. 9. Press SKIP or REPEAT button. You will hear PM. Press SKIP OR REPEAT 041504A-1 32 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () button again to go back to AM. button to select the third digit you desired. button to select the second digit you desired. or Repeat or Repeat or Repeat button (on the base) to select the first digit you desired. 10. Press TIME SET button to confirm. The new day and time will announced. SETTING REMOTE CODE 1. Press CODE button(on the base). Then you will hear the current setting, one, two, three. 2. Press and hold code button for about 3 seconds. 3. Press Skip 4. Press the CODE button to confirm. 5. Press Skip 6. Press the CODE button to confirm. 7. Press Skip 8. Press the CODE button to confirm. You will hear the newly programmed 3-digit security code. NOTE: When the Excursion35178 is disconnected the AC Adaptor from the base beyond five hours, the code will be returned to the original setting 123. OUTGOING MESSAGE (OGM) This is the announcement callers will hear when Excursion35178 answers a call. The Excursion35178 also has a default OGM(factory preset) which is active when there is no OGM present. Default OGM: Please record your message after the beep. RECORDING THE OUTGOING MESSAGE(OGM) Outgoing Message(OGM) is recorded remotely on the handset. The maximum recording time is 30 seconds. 1. In standby mode, press the REMOTE button on the handset. The Excursion35178 will prompt . 2. Press 3 button. The Excursion35178 will prompt Please record your announcement after the beep. 3. After hearing a long beep, begin your announcement. 4. Press 5 button to stop recording and the Excursion35178 will playback once automatically for your review. Press the REMOTE button to exit the remote mode. Otherwise, the unit will automatically turn off if not in use for 8 seconds. In standby mode, Press the OGM button. Press and hold the OGM button. Outgoing Message(OGM) is recorded on the base unit. The maximum recording time is 30 seconds. 1. 2. 3. Record your greeting after you hear a beep tone. 4. Release the OGM button after you finish recording your greeting. Your recorded greeting will be 5. played after releasing the button for users confirmation. CHECKING THE OUTGOING MESSAGE (OGM) 041504A-1 33 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () 1. In standby mode, press the OGM button on the base unit to hear your previously recorded OGM. 2. You can stop OGM playback anytime during playback by pressing the PLAY/STOP button. RECORDING A MEMO Memo message(s) is recorded on the base unit. The maximum recording time is 1 minutes. 1. In standby mode, Press the MEMO button. 2. Press and hold the MEMO button. 3. Record your greeting after you hear a beep tone. 4. Release the MEMO button after you finish recording your greeting. PLAYING BACK MESSAGE If the NEW/MSG LED indicator is on, it indicates that you have Memo or ICM message(s). If it is blinking, it indicates that there is new message(s). The blinking counts mean the number of new messages. A. PLAYING MESSAGES In standby mode, press the PLAY/STOP button on the base unit. The Excursion35178 will announce You have (number)(Memo) message. And begins playing the first message to the end. It will announce the message number before each message. B. SKIPPING MESSAGES Press the SKIP message. C. PREVIOUS MESSAGES Press REPEAT message. D. STOP MESSAGE PLAYBACK Press the PLAY/STOP button to stop message playback. ERASING MESSAGES A. SELECTIVE ERASING 1. Press the ERASE button on the base unit during message playback. 2. The Excursion35178 will announce (Message)(Memo)(Number) erased. And then start the next button on the base unit during message playback to skip forward to the next button once on the base unit during message playback to skip backward one message. NOTE: Erased message can not be retrieved. There is a momentary delay after erasing messages to allow the Excursion35178 to reorganize and optimize its memory space. B. ERASING ALL ICM AND MEMO 1. 2. The Excursion35178 will announce Message(number) erased. You have no message. C. ERASING OGM 1. In standby mode, press and hold the ERASE button for about 2 seconds. During OGM playback, press ERASE button. 041504A-1 34 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () The Excursion35178 will announce Erase your announcement. You have no announcement . 2. NOTE: After erasing messages during memory full or near memory full, you may hear a continuous beep for several seconds indicating memory sorting of the unit. MEMORY FULL DETECTION The memory full condition occurs:

. If 15 minutes of recording time is reached, or

. If 59 message (i.e. Memo, OGM, ICM) have been recorded. If there is an incoming call, the unit will answer at the 10th ring and announce Memory full. You can erase any or all the messages remotely after listening to them. NOTE: Sometimes you may fail to escape from memory full condition when erasing a short message. In this case, you must erase more messages(at least 1 minute message). CALL SCREENING You can listen to the caller leave their ICM and decide if you want to answer the call. A. FROM THE HANDSET(Away From the Base Unit) 1. When the Excursion35178 rings, press the REMOTE button on the handset, The Excursion35178 will immediately answer the call. You will hear your OGM followed by the callers message through the handset receiver. If you decide to take the call, simply press the TALK button and begin speaking. 2. B. FROM THE HANDSET (In the Base Unit Cradle) 1. When the Excursion35178 answers a call, you will hear your OGM followed by the callers message through the base units speaker. If you decide to take the call, simply pick up the handset. Begin speaking and the ICM recording is stopped. The recorded message is stored in memory and the message count is incremented by one. C. FROM THE EXTENSION PHONE 1. When the Excursion35178 answers a call, you will hear your OGM followed by the callers message through the speaker. If you decide to take the call, just lift the handset of the extension phone on the same line as the Excursion35178. The ICM recording is stopped and the recorded message is stored in memory while the message count is incremented by one. VOX(VOICE ACTIVATED) DETECTION During OGM, ICM or Memo recording, The Excursion35178 uses VOX(voice activation) to conserve message storage space. The conditions for the Excursion35178 terminating a recording are:

. Continuous silence for seven seconds. Seven seconds after the caller hangs up. 2. 2. 041504A-1 35 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () Call the Excursion35178 from a tone dialing phone. After a successful password entry , the Remote Operation function is on. Press the REMOTE button to activate the remote function. The base unit IN USE LED indicator will blink. REMOTE OPERATION Allows you to access most of the Excursion35178 functions away from the base unit using only the handset or any touch tone phone when you call the Excursion35178. You can play, repeat, skip, erase, and stop messages in the message boxes, record an OGM. USING THE REMOTE OPERATION FUNCTION There are Two-Ways of using Remote Operation:

1. Handset (Remote Unit), or 2. Calling the Excursion35178 from a Tone Dialing Phone A. USING THE HANDSET 1. 2. B. CALLING THE Excursion35178 FROM A TONE PHONE NOTE: The factory preset password for remote operation is 123. 1. 2. While the OGM is playing or during ICM recording, enter your 3 digits password. 3. Once you have activated the Remote Operation function either by handset or through a tone dialing phone to call the Excursion35178. The Excursion35178 will announce the total number of new message(s) in Message (MSG) box. REMOTE COMMANDS A. VOICE HELP MENU Press the 7 button for Voice Help Menu. remote commands can be entered during playback of the menu. The following table shows the Voice Help Menu:

B. STOP FUNCTION Press the 5 button to abort the current function. Playback Message(ICM or Memo) Erase a Message during playback Key 1 2 3 4 5 6 7 Skip Forward to the Next Message Play back Previous Message Record OGM Message Voice Help Menu Stop function Function 041504A-1 36 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () C. OGM RECORDING 1. Press the 3 button. The unit will prompt Please record your announcement after the beep. To STOP, press the 5 button. After hearing a long beep, begin your announcement. The maximum recording time is 30 seconds. Press the 5 button to stop recording and the Excursion35178 will automatically playback once for your review. 2. 3. D. PLAYBACK MESSAGES/MEMOS Press the 1 button for playback incoming Message (ICM)/ Memo message , the Excursion35178 will announce You have (number )(new)(Memo) message. E. ERASE MESSAGES/MEMOS Press the ERASE button on the handset during message playback. 65,536 Combination Security Coding The cordless telephone have a digital coding security system to prevent unauthorized use of your telephone line by other cordless phones nearly. The cordless telephone have 65,536 possible security code combinations. Each combination of the code is randomly generated every time the handset is picked up. Resetting Security Code and Channel Communication between the handset and the base unit may not be possible in any of the following situations:

1. After a power failure. 2. After relocating the base unit by disconnecting the AC adapter. 3. After replacing the handset battery. 4. The handset goes out of range from the base unit. To reset, place the handset on the cradle of the base unit for five seconds. IMPROVING CORDLESS RECEPTION Follow these guidelines to improve cordless sound quality:

Select an area to install the unit where it is closest to the center of your home or office. This will improve the operating range of the unit. Keep the base unit away from electrical equipment. Radio Frequency Interference (RFI) is sometimes generated by these appliances, which can cause a degradation in cordless reception. Keep the handset batteries charged as much as possible. Weak handset batteries can limit the range of cordless operation. MAXIMIZING BATTERY LIFE Repeated use or recharge of Ni-Cd batteries without periodic full discharge results in reduced useable 041504A-1 37 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () charge time. When you notice the usable charge duration decreasing, fully discharge the Ni-Cd battery and recharge as described:

DISCHARGING 1. Unplug the telephone line cord from the Excursion 35178. 2. Make sure that the adapter is connected. 3. Lift the handset out of the base cradle. 4. Press the TALK button of the handset and start discharging. Once the Symbol LOW Battery appears on LCD display, it means that the battery level is low. Let it fully discharge for 12 hours. Once the Ni-Cd battery is fully discharged, you may now charge the battery to its full capacity. CHARGING 1. Make sure the adapter and telephone line cord are connected to the Excursion 35178. 2. Place the handset on the base cradle. The CHARGE LED indicator of the base unit will light steadily. 3. Leave the handset charging on the base for 14 hours continuously to get a maximum charge. 4. The Excursion 35178 is now ready for regular use. Discharge and charge the Ni-Cd battery again once you notice a decrease in the useable charge time. MAINTENANCE 1. Your phone should be situated away from heat sources such as radiators, heaters, stoves or any other appliance that produces heat. 2. Use a slightly damp cloth to clean the plastic cabinet. A mild soap will help to remove grease or oil. Never use polish, solvents, abrasives or strong detergents since these can damage the finish. TECHNICAL INFORMATION This cordless phone uses radio frequencies to allow mobility. There are certain difficulties in using radio frequencies with a cordless telephone. While these are normal, the following could affect the operation of your system. NOISE: Electric pulse noise is present in most homes at one time or another. This noise is most intense during electrical storms. Certain kinds of electric equipment such as light dimmers, fluorescent bulbs, motors, and fans also generate noise pulses. Because radio frequencies are susceptible to these noise pulses, you may occasionally hear them in your handset. Generally, they are minor annoyances and should not be interpreted as defects in your system. RANGE: Because radio frequencies are used, location of the base unit can affect operating range. Try 041504A-1 38 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () several locations in your home or business and pick the one that gives you the clearest signal. INTERFERENCE: Some electronic devices operate in and/or generate interference near the operating frequencies of your cordless telephone. While several protection circuits are used to prevent unwanted signals, there may be periods when these unwanted signals cause interference. If interference occurs frequently, it can be minimized or eliminated by lowering the height of your base antenna or by relocating the base unit. You can check for interference before selecting the final base unit location by plugging in the phone. 041504A-1 39 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () A.TELEPHONE UNIT TROUBLESHOOTING TABLE TROUBLESHOOTING SYMPTOM No dial tone Does not ring No power on the handset unit Does not charge Range is limited Interference on reception Excessive static Incoming calls/Memo message are cut off SOLUTION Check the telephone line cord connectors at both ends that they are pushed in firmly until they click. If you had a power failure or had unplugged the base unit, replace the handset on the base unit for two to five seconds to reset the system. Check the RING ON/OFF mode on the handset. Set to RING ON mode to enable the handset ringer. Check the telephone line cord connectors at both ends that they are pushed in firmly until they click. You may have exceeded the Ringer Equivalence Number(REN) limit of how many phones can be connected to the same line. The REN total of all devices(printed on the bottom label of each unit)should not exceed five(5). Disconnect the appropriate units to lower the REN total. Check the Ni-Cd battery pack for proper connection inside the battery compartment on the handset. The handset rechargeable Ni-Cd pack may need charging. Check the Ni-Cd battery pack for proper connection inside the battery compartment on the handset The charging contacts and terminals may need cleaning with an alcohol-dampened swab. Move the base unit so that it is centrally located in your residence or office and make sure that the base unit is not located near appliances. The handset Ni-Cd battery may be weak. Recharge the Ni-Cd battery. Refer to the section Improving Cordless Reception. Choose an alternate channel using the SCAN button on the handset. Refer to the section Improving Cordless Reception. Refer to the section Improving Cordless Reception. The Excursion35178 will stop recording after 7 seconds of continuous silence or 7 seconds after the caller hangs up (VOX features). Each incoming message recording is limited to two minutes to conserve message storage space. The 15-minute recording limit may have been reached. Erase old message to make room for new messages. Announces Memory Full 041504A-1 40 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () Can not access Remote Operation The password you have entered may be incorrect. Enter the correct password during OGM playback or within 7 seconds after the OGM has finished playing. B. CALLER ID SYSTEM TROUBLESHOOTING TABLE SYMPTOM The Caller ID panel is blank The Caller ID does not show the callers name and/or phone number Random characters and/or NO DATA appear on the LCD display Cannot get call Waiting identification on the LCD panel SOLUTION Check the power connection. Check the telephone line cord connections. Check the batteries for proper installation. The Caller ID unit will not function until you have Caller ID service provided by your local phone company. Call your local phone company to have Caller ID installed on your telephone line. If you pick up the phone before the second ring, the caller information will not be correctly received. If you have telephone answering device(TAD) connected with the unit, set the TAD to answer after two rings or more. If it is a blocked call or an out-of-area call, the callers name and/or phone number will not appear on the display. If only the callers phone number appears on the display, it may be Single Data Message Format(SDMF) call, as opposed to a Multiple Data Message Format (MDMF) call. Please call your local phone company to see which service you have. On rare occasions, the Caller ID information sent by the telephone company may have an error in the transmission. This is not the fault of your Caller ID unit. It can only capture and store the data that was received. Subscription to Caller ID Call Waiting (CIDCW) is required from your local phone company for the CIDCW function to operate properly. Call you local phone company for details. NOTE: On rare occasions, the system may fail to operate due to a power surge. To reset the system -

disconnect the AC Adaptor from the base then reconnect it. 041504A-1 41 SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 17 10 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: senton@netvigator.com : () Distributed Exclusively Worldwide by Unical Enterprises, Inc., Industry, California, USA 35178/031504A-1 www.nwbphones.com OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE OWNERS MANUAL. THIS SYMBOL IS INTENDED TO ALERT THE USER OF THE PRESENCE AC ADAPTOR:USE ONLY WITH CLASS 2 POWER SOURCE, OUTPUT 12V DC, 500mA . 041504A-1 42