BT985 (2218) tH 326 X10CM BT985 TRUE WIRELESS EARBUDS BT985 : WIRE-FREE EARBUDS English 1 Using your BT985 True Wireless Earphones Before use: Charge both earbuds by placing it inside the charging case. STEP 1 Turn off the Bluetooth function from you music device. Eg. Mobile phone or music device. STEP 2 Take out the earbuds from the charging case after they have charged. The earphones will be automatically on and paring. When pairing successfully, the left earphone will flash red and blue alternately and the right earphone light will go out. STEP 3 When auto-pairing failed, or dual earphone disconnected. Press the power button on left and right earphone, to make the earbuds off and on again, the left and right earphone will be connected manually.
* If putting the earbuds back to the charging case or pairing the earbuds by buttons, neither way is ok to make the earbuds pairing, please long press the buttons for about 10 seconds, to force the earbuds off and on again.
(some kinds of bluetooth solutions support this kind of operation) STEP 4 You can now turn on the Bluetooth function of your mobile phone. Search and select BT985,click it to connect. 2 Button Function On/Off Buttons Pairing dual earphones: Long press left and right earphone button for 3 seconds, turn on or off the earphones. Pairing single earphone: Long press left or right earphone button for 3 seconds to turn on the earphones, enter single earphone pairing. Then long press for 3 seconds, turn off the earphones.
( When power on, the earphone will flash red and blue alternately. When power off, the light is off. ) Answer / Hang Up When coming call, click the button on the left or right earphone to answer the phone. During the call, click the button on the left or right earphone to hang up the call. Reject / Call Back When coming call, long press left or right earphone to refuse the call. Three-click the right earphone button to resume back to the last call, three-click the left earphone button to open the voice assistant. English Play / Pause Music While playing music, click the button of left or right earphone to play or pause the music. If one of the earbuds have run out of battery, the other one will continue to work until it runs out of power also. Last / Next Song Control When playing, double-click the left earphone button to switch to the Last song;
double-click the right earphone button to switch to the next song. 3 Charging Function Charge the Charging Box There is an USB charging cable in the package, you can connect the power adapter for charging. Charge for Earphones Please double check and confirm the charging compartment has sufficient power, then put the earphones into the correct position for charging. If the earbuds are not placed securely into the case, it may not charge. Please take out the earbuds and re-insert them in the case. A red light will appear to confirm that charging has started. 4 Frequently asked questions Why bluetooth earbuds can not turn on?
1) You can check if earbuds is with power or not ? if not, please fully charge it before turning it on. 2) Please long press the power on /off button.(the detailed operation , please refer to the manual.) Why bluetooth earbuds signal is unstable ?
1) Restart the bluetooth earbuds . 2) Please kindly check the compatibility and calling communication quality of the mobile phone. 3) Please confirm if the distance between earbuds and phone is too far or there are interference surrounded. If too far or there are interference ,the signal will be unstable. 4) Please dont stay in the signal reflective environment. Why the bluetooth earbuds cant hear voice ?
1) Please kindly check if the bluetooth earbuds is on mute status. 2) Please kindly check if bluetooth earbuds and phone are connected well. 3) Then confirm if the distance between earbuds and phone is too far or there are interference surrounded. English Specifications:
*Model: BT985
*Bluetooth Version: 5.0
*Power Input: DC 5V
* Earphone Working Time: About 6 HR @ 50% VOLUME
* Earphone Charging Time: About 1 hours
*Charge Time: About 3~4h
*Earphone battery capacity: 6(0mAh
*Charging Case battery capacity: 400mAh
*Support Protocol: HSP/HFP/A2DP/AVRCP
*Sensitivity: 103+/-3dB
* Frequency response: 20-20kHz
*Impedance: 16 ohms
*Driver unit: 6 mm Actual playback times may vary. Battery performance may be effected by multiple factors including but not limited to ambient temperature, listening volume, and/or distance from source audio device. Limited 90-Day Warranty: Sentry warrants this product to be free from defects in materials and workmanship for 90 days from the date of original purchase. This warranty does not pertain to damage resulting from accident, abnormal use, misuse or neglect. Any defective product will be replaced if returned to an authorized Sentry dealer or to Sentry directly at: PO Box 885, One Bridge Street, Hillburn, NY 10931. Please enclose a $5 check for return shipping. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID:2ACP4LBT985 FCCID:2ACP4LBT985R Model #BT985 The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Sentry Industries inc declares that radio equipment BT985 is in compliance with Directive 2014/53/EU. The EU declaration of confirmity is available at https://sentryindustries.com/european-declaration-of-conformity/
Confirmity with Directives This product is CE marked to denote conformity with Directives 73/23/EEC (low voltage) and 89/336/EEC (Electromagnetic Compatibility) , as amended. Environmental Protection Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. CGO English NOTE: This equipment has been tested and found to comply with the limits fora Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ina residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular Installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.