User Manual Bluetooth Headset BT150 FCC ID:2ACP4BT150 Product Parameters Model Version Stand-by Time Power Input Noise Reduction Skip Function Product Application BT150 V4.1 180 180 hours DC5V/200mA CVC6.0 Support Use Distance Battery Capacity Talk Time Charging Time Protocol Voice Prompt 10 10 m 55mAH 4.5 4.5 hours 2 2 hours HFP HSP A2DP AVRCP APTX Support
///
/
Caller report, line control answer/hang up/rejection/on-off, redial, volume adjustment, Chinese-English shifting, intelligent one-driving-
two, music pause/play, up and down song switching ipad Support any mobile phones with Bluetooth device, iPad and desktop computer. The desktop computer without Bluetooth function can be used by matching with the Bluetooth adapter. Pairing and Connection 1 1. Keep the distance between the mobile phone and the headset within 1 m; the closer, the better. 2 5 2. Press and hold the key for about 5 seconds, and then release it when the red and the blue lamps alternately blink. At this time, the headset has entered the paring mode. 3 BT150 3. Enable the Bluetooth function of the mobile phone, search the Bluetooth equipment, select BT150 sequence name for paring and connection. After connection is successful, the blue indicating lamp of the headset slowly blinks. Notes:
0000 If the mobile phone prompts to enter the pairing password, please enter 0000 and confirm. The pairing mode will be maintained for 5 minutes. If pairing and connection are unsuccessful beyond 2 minutes, the headset will automatically switch to the stand-by mode. After pairing iscompleted, the headset and the handset will remember eachother, without pairing 5 2 Key functions of line controller
(Vary with the brand, mode and system version of the mobile phone. The consumers shall make verification by themselves.)
/: 5 /
On/off: Press and hold the key for 5 seconds to turn on/off. Music or video pause: Press the key to pause playing, and press the key again to resume playback.
+-
Volume increase: Press and hold the key +; volume reduction: Press and hold the key -.
+-
Next song: press the key +; previous song: press the key -.
/
Answer/hang-up: press the key to answer when the call is incoming, and press it again to hang up. 2 Rejection: Press and hold the key for about 2 seconds and then release it.
+
Chinese-English voice shifting: Press and + at the same time. Setting method of intelligent one-driving-two Step I: pair and connect the first mobile phone 1. 5 1. In the off state of the Bluetooth headset, press and hold the multifunction key for about 5 seconds and enter into the pairing state when the red and blue headset indicating lamps alternately and quickly flash. 2. A BT150 2. Enable the Bluetooth function of the mobile phone A, search Bluetooth to find BT150 sequence name to pair and then connect. Step II: pair and connect the second mobile phone 1. A 1. Turn off the Bluetooth headset to disable the Bluetooth of the mobile phone A. 2. 5 2. In the off state of the Bluetooth headset, press and hold the multifunction key for about 5 seconds and enter into the pairing state when the red and blue headset indicating lamps alternately and quickly flash. 3. B BT150\
3. Enable the Bluetooth function of the mobile phone B, search Bluetooth to find BT150sequence name to pair and then connect. Step III: connect the first mobile phone with the headset again 1. A 1. Enable the Bluetooth function of the mobile phone A. 2.BT150 2. Find out the record of BT150 sequence namepreviously connected under the Bluetooth menu of the mobile phone, and then click Connect again. 3. A B 3. At this point, the mobile phone A and the mobile phone B are simultaneously connected to the Bluetooth headset. FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the television receiver is connected. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: Modifications to this product will void the users authority to operate this equipment.