INFORMATION DOCUMENT NO. DDBCM1307-SL RELATING TO CE TYPE-APPROVAL AS SEPARATE TECHNICAL UNIT OF VEHICLE RF REMOTE KEYLESS ENTRY IN BCM SYSTEM CONTENTS LIST Information Document
(5 sheets:
including this sheet) Attachment 1 - System diagram
(1 sheet) Attachment 2 - TRANSMITTER Diagram
(1 sheet) Attachment 3 - Schematic of the Receiver
(1 sheet) Attachment 4 - Layout of the Receiver
(1 sheet) Attachment 5 - Part List
(1 sheet) DAE DONG CO., LTD.
- 2013.02.05 -
Title :
Information Document NO. Date 0. GENERAL 0.1. Make DAE DONG Co.,Ltd. 0.2. Model No.
: DDBCM1307-SL 0.3. Name and address of manufacturer DAE DONG Co.,Ltd. 424, Sinwon-ro, Wonsi-dong, Danwon-gu Ansan-si, Gyeonggi-do, Korea 0.4. Address of assembly plant DAE DONG Co.,Ltd. 424, Sinwon-ro, Wonsi-dong, Danwon-gu Ansan-si, Gyeonggi-do, Korea Title :
Information Information Document NO. Date 2. PRODUCT SPECIFICATION 2.1 Remote Keyless Entry System 2.1.1 KEY PART : TRANSMITTER is inside of the REMOTE KEY, and it sends the ROLLING CODE to the RECEIVER by Radio Frequency. 2.1.2 RECEIVER : It receives the ROLLING CODE and decodes that, thereafter RECEIVER drives the actuator. 2.2 SPECIFICATIONS 2.2.1 TRANSMITTER ITEM Rated supply voltage Operating voltage range Operating temperature range Storage temperature range Modulation Frequency Code Electric field strength Battery life SPECIFICATION DC 3V DC 2.5 ~ 3.2V
-20 ~+60
-30 ~ 80 FSK 315.00MHz Rolling Code(Hopping Algorithm) 10mW (315.00MHz) 2 Year(10Times/Day)(Lithium 3V 1EA) 2.2.2 RECEIVER Item Rated Supply Voltage Operating Voltage Operating Temperature Max Humidity Standby Current Specification DC 12V DC 9 ~ 16V
- 30 ~ + 80 95%
Below than 5.5mA
(in alarm setting condition) Title :
Information Document Information Document NO. Date 2.3 Operating summary TRANSMITTER's button is pushed. TRANSMITTER sends the code by radio frequency. RECEIVER gets the code and decodes it. RECEIVER judges the code whether it is right code or not. RECEIVER checks door lock or unlock Tail-Gate state. RECEIVER drives the actuator. 2.3.1 LOCK & UNLOCK If LOCK or UNLOCK button is pushed for less than 1 sec, then TRANSMITTER sends the LOCK or UNLOCK DATA. If TAIL-GATE button is pushed for more than 1 sec, then TRANSMITTER sends the TAIL-GATE DATA. 2.4 Caution Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions. Title :
Information Document Information Document Information Document Information Document NO. Date 3. USER MANUAL 3.1 NAME : BCM system
- This system is BCM and inculdes RKE.
- RKE in BCM system is intended for auto door lock or unlock or TAIL-GATE in vehicle.
- This BCM system is to be installde on motor vehicles as *OE item.
*OE : Original Equipment.
*BCM : Body Control Module.
*RKE : Remote Keyless Entry. 3.2 SYSTEM CONSTRUCTION 3.2.1 SYSTEM IN VEHICLE ROLLING CODE
(315.00MHz) ANTENNA BATTERY RECEIVER DOOR ACTUATOR 3.2.2 SYSTEM FOR TEST ANTENNA BATTERY LOCK or UNLOCK or TAIL-GATE DATA ROLLING CODE
(315.00MHz) RECEIVER lamp
* Through the use of lamp, operating state is displayed by lamp. lamp 'ON' means that actuator is operated by door lock or unlock or tail-gate output signal.