0. GENERAL 0.1. Make Shinchang Electrics Co.,Ltd. 0.2. Model No.
- Transmitter : SEKS-TF10ATx
- Receiver : SEKSFS10APM 0.3. Name and address of manufacturer Shinchang Electrics Co.,Ltd. 734-2, Wonshi-Dong, Ansan-Si, Kyonggi-Do, Korea. 0.4. Address of assembly plant Shinchang Electrics Co.,Ltd. 734-2, Wonshi-Dong, Ansan-Si, Kyonggi-Do, Korea. THN Co., Ltd. 973-3 Galsan-Dong, Dalseo-Gu, Daegu, korea. 2. PRODUCT SPECIFICATION 2.1 SCOPE OF REMOTE KEYLESS ENTRY SYSTEM 2.1.1 KEY PART : TRANSMITTER is inside of the REMOTE KEY, and it sends the ROLLING CODE to the RECEIVER by Radio Frequency. 2.1.2 RECEIVER : It receives the ROLLING CODE and decodes that, thereafter RECEIVER drives the actuator. 2.2 SPECIFICATIONS 2.2.1 TRANSMITTER ITEM Rated supply voltage Operating voltage range Operating temperature range Storage temperature range Modulation Frequency Code Electric field strength Battery life SPECIFICATION DC 3V DC 2.5 ~ 3.2V
-20 ~+60
-30 ~ 80 FSK 315MHz Rolling Code(Hopping Algorithm) 10mW (433.92MHz) 2 Year(10Times/Day)(Lithium 3V 1EA) 2.2.2 RECEIVER Item Rated Supply Voltage Operating Voltage Operating Temperature Max Humidity Standby Current Specification DC 12V DC 9 ~ 16V
- 30 ~ + 80 95%
Below than 5mA
(in alarm setting condition) 3. USER MANUAL 3.1 NAME : IPM system
- This system is IPM and inculdes RKE.
- RKE in IPM system is intended for auto door lock or unlock or PANIC in vehicle.
- This IPM system is to be installde on motor vehicles as *OE item.
*OE : Original Equipment.
*IPM : Anti Theft Alarm System.
*RKE : Remote Keyless Entry. 3.2 SYSTEM CONSTRUCTION 3.2.1 SYSTEM IN VEHICLE ROLLING CODE
(315MHz) ANTENNA BATTERY RECEIVER DOOR ACTUATOR 3.2.1 SYSTEM FOR TEST ROLLING CODE ANTENNA BATTERY LOCK or UNLOCK or PANIC DATA RECEIVER lamp
* Through the use of lamp, operating state is displayed by lamp. lamp 'ON' means that actuator is operated by door lock or unlock or PANIC output signal. 2.3 Operating summary TRANSMITTER's button is pushed. TRANSMITTER sends the code by radio frequency. RECEIVER gets the code and decodes it. RECEIVER judges the code whether it is right code or not. RECEIVER checks door lock or unlock RECEIVER drives the actuator. 2.3.1 LOCK & UNLOCK If LOCK or UNLOCK button is pushed for less than 1 sec, then TRANSMITTER sends the LOCK or UNLOCK DATA. 2.4 Caution Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions.