INFORMATION DOCUMENT NO.RELATING TO SRRC TYPE-APPROVALAS SEPARATE TECHNICAL UNITCONTENTS LISTInformation Document (10 sheets:including this sheet)Attachment 1 - System diagram (6 sheet)Attachment 2 - Drawing of the smk (9 sheets)SEOYON ELECTRONICS Co.,Ltd.- 11. May. 2016 -Page 1 of 29 Title :Information DocumentNO. :Date : 11. May. 20160. GENERAL0.1. MakeSEOYON ELECTRONICS Co.,Ltd.0.2. Model No.:SYECSMK1608- SMART KEY SYSTEM : 0.3. Name and address of manufacturerSEOYON ELECTRONICS Co.,Ltd.424, Sinwon-ro, Danwon-gu, Ansan-Si, Kyonggi-Do, Korea.0.4. Address of assembly plantSEOYON ELECTRONICS Co.,Ltd.424, Sinwon-ro, Danwon-gu, Ansan-Si, Kyonggi-Do, Korea.Page 2 of 29 Information Document Title :Information DocumentNO. :Date : 11. May. 20161.PRODUCT SPECIFICATION1.1Scope of passive entry control, passive start control in SMART Key system.1.1.1SMK UNIT : It is an ECU to control the whole smart key system. It has functions suchas passive entry control, passive start controlFOB KEY : It has the functions for passive entry and passive start including the previousRKE functions. It also has the TP for emergency authentication for passive start2.2.3SSB : It is a button to control engine start including power transition according to eachterminal status2.2.4ESCL : It is the abbreviation of "Electrical Steering Column Lock" and fully controlled bySMK. It has two hall sensors to detect unlock, lock position firmly.2.3Specification2.3.3SMK UNITFOB KEYPage 3 of 291.1.21.2.2ItemSpecificationOperating voltage rangeDC 9 ~ 16VOperating voltage range-35 ~+75Storage temperature range-40 ~+85Power ConsumptionDark Current, Max 4mAItemSpecificationOperating VoltageDC 2.5 ~ 3.2VOperating Temperature- 10 ~ +60Storage temperature range- 40 ~ + 85(W/O Battery)ModulationFMFrequency433.92MHzCodeRolling code(Hopping algorithm) Information Document Title :Information DocumentNO. :Date : 11. May. 20161.2.3 SSB(Start Stop Button)Page 4 of 29ItemSpecificationOperating voltage rangeDC 9 ~ 16VOperating voltage range-35 ~+75Storage temperature range-40 ~+85Power ConsumptionDark Current, 0mAModulationASKFrequency (Transmitting)(Data Receiving between Fob Key and SSB)134.2kHz Information Document Information Document Information Document s LO Title :Information DocumentNO. :Date : 11. May. 20162.USER MANUAL2.1Operation summary2.1.1Fob KeyIt has the functions for passive entry and passive start including the previous RKE functionsBATTSWINPUTS3DANTASICRFModulatorMCU + LF Demodulator + Transponder2.1.2Immobilizer & SSB(StartStopButton) FunctionFob Key has the TP for emergency authentication for passive start.It's a button to control engine start including power transition according to each terminal statu To indicate terminal status,two LEDs for backlight and one for text illumination are usedIt also has TP coil to take action for emergency.Page 5 of 29 FCC Information This device complies with part 15 of the FCC Results. Operation is subject to the following two conditions :
(1) This Device may not cause harmful interface, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:
1.1. Reorient or relocate the receiving antenna. 1.2. Increase the separation between the equipment and receiver. 1.3. Connect the equipment into an outlet on a circuit different from that to which receiver is connected. 1.4. Consult the dealer or experienced radio/TV technician for help. WARNING Changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment. CAUTION : Exposure to Radio Frequency Radiation. Antenna shall be mounted in such a manner to minimize the potential for human contact during normal operation. The antenna should not be contacted during operation to avoid the possibility of exceeding the FCC radio frequency exposure limit.
"ATTENTION: L'exposition aux rayonnements frquence radiolectrique. Antenne doit tre monte de telle manire minimiser le risque de contact humain pendant l'utilisation normale. L'antenne ne doit pas tre contact pendant le fonctionnement pour viter la possibilit de dpasser la limite de l'exposition aux frquences radio de la FCC. IC Information This device complies with Industry Canada license-exempt RSS standard(s). Operation in subject to The following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme avec Industrie Canada RSS standard exempts de licence(s), Son utilisation est soumise Les deux conditions suivantes: (1) cet appareil ne peut pas provoquer dinterfrences et (2) cet appareil doit accepter Toute interfrence, y compris les interfrences qui peuvent causer un mauvais fonctionnement du dispositif.