FCC ID: 2AAGMGC02SA LTE Cat1-bis module

1. The triangle in the bottom-right corner provides pin #1 location. 2. FCC ID: 2AAGMGC02SA 3. IC: 12732A-GC02SA 4. IMEI:XXXXXXXXXXXXXXX 5. S/N:C2AYYMMDDNNNNSSS (16 digits) C2A: reserved, value subject to change at Sequanss discretion (3 digits);

YYMMDD: Manufacturing Date (YY:Year;MM:Month,DD:Day);

NNNN: Panel counter (from 0001~9999);

SSS: Piece location on panel (from 001~036) 6. 2D marked a refer to IMEI Barcode 7. 2D marked b refer to S/N Barcode

Date: 02/10/2023 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046 FCC ID: 2AAGMGC02SA To whom it may concern:

We, hereby authorize, Sequans Communications 90 Washington Valley Rd, Bedminster, New Jersey, 7921, USA DEKRA Testing and Certification S.A.U. Parque Tecnolgico de Andaluca C/Severo Ochoa, 2 & 6 | 29590 | Mlaga | Spain Agent:

e-mail:

Phone:

lvaro Corrales Sedeo alvaro.corrales@dekra.com

+34 952 619 198 to act as our agent in the preparation of this application for equipment certification, including the signing of all documents relating to these matters. We also hereby certify that neither we nor any party to this application are subject to a denial of U.S. Federal benefits, which include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862 because of conviction for possession or distribution of controlled substance. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by DEKRA Testing and Certification, S.A.U., still resides with us. This agreement expires one year from the current date. Sincerely, ________________________________________ By:

Title:

Telephone:

email:

Sunpreet Kaur NAM & EMEA Certification Manager

+12062476609 skaur@sequans.com

Date: 02/10/2023 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046 FCC ID: 2AAGMGC02SA To whom it may concern:

We, Sequans Communications 90 Washington Valley Rd, Bedminster, New Jersey, 7921, USA Hereby certify that, the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, ________________________________________ Sunpreet Kaur NAM & EMEA Certification Manager By:

Title:

Telephone: +12062476609 email:

skaur@sequans.com

Date: 02/10/2023 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046 FCC ID: 2AAGMGC02SA To whom it may concern:

We, Sequans Communications 90 Washington Valley Rd, Bedminster, New Jersey, 7921, USA hereby request requests that a part of the subject FCC application be held confidential to avoid release of sensitive information of the product to the public pursuant to 0.457(d)(1)(ii) and 0.459 of the Commissions Rules (47 C.F.R.) and 552 (b)(4) of the Freedom of Information Act, For the product stated above, we request that the following information be withheld from public disclose:

Type of Confidentiality Requested Exhibit Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent Permanent Permanent Permanent Permanent Block Diagrams Operation Description Schematics Parts List & Placement/BOM Tune-Up Procedure SDR Software and Security Information Test Setup Photos Users Manual External Photos Internal Photos Permanent Confidentiality:

The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to us and provide unjustified benefits to our competitors. Short-Term Confidentiality:

We hereby request short-term confidentiality for the product stated above to avoid premature release of sensitive information prior to marketing or release of the product to the public. Release date of short-term confidentiality is:

45 days from grant date marked 90 days from grant date marked 135 days from grant date marked 180 days from grant date marked Specific date:

We are also aware that we are responsible to notify DEKRA Testing and Certification S.A.U. in the event information regarding the product or the product is made available to the public. DEKRA Testing and Certification S.A.U. will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, ________________________________________ By:

Title:

Telephone:

email:

Sunpreet Kaur NAM & EMEA Certification Manager

+12062476609 skaur@sequans.com

Certification designating a U.S. agent for service of process.

(as required by section 2.911(d) (7)) Date: 02/10/2023 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046 FCC ID: 2AAGMGC02SA To whom it may concern:

We, Sequans Communications hereby certify that the following company, 90 Washington Valley Rd, Bedminster, New Jersey, 7921, USA FRN: 0034219402 Sequans Communications 90 Washington Valley Rd, Bedminster, New Jersey, 7921, USA FRN: 0034219402 is our designated U.S. agent for service of process and we acknowledge:

our consent to accept service of process in the United States for matters related to the applicable equipment at the physical U.S. address and email address of the designated U.S. agent the acceptance to maintain an U.S. agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Sincerely, By:

Title:

Telephone:

email:

Sunpreet Kaur NAM & EMEA Certifications Manager

+1.206.248.6609 skaur@sequans.com We Sequans Communications acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address stated above. Sincerely, By:

Title:

Telephone:

email:

Sunpreet Kaur NAM & EMEA Certifications Manager

+1.206.248.6609 skaur@sequans.com

Date: 02/10/2023 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046 FCC ID: 2AAGMGC02SA To whom it may concern:

We, Sequans Communications 90 Washington Valley Rd, Bedminster, New Jersey, 7921, USA through the following attestation, hereby address the requirements to support modular approval pursuant to 15.212 of the Commissions Rules:

Modular approval requirement Yes No*

(i) The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements.

(ii) The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation.

(iii) The modular transmitter must have its own power supply regulation.

(iv) The modular transmitter must comply with the antenna and transmission system requirements of 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a unique antenna coupler (at all connections between the module and the antenna, including the cable). The professional installation provision of 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section.

(v) The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see 15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to ensure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment X X X X X connected to the module during testing shall be unmodified and commercially available (see 15.31(i)).

(vi) The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. X

(vii) The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. X

(viii) The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. X

* Shall provide a detailed explanation if the answer is No. Sincerely, ________________________________________ By:

Title:

Telephone:

email:

Sunpreet Kaur NAM & EMEA Certification Manager

+12062476609 skaur@sequans.com

Date: 02/10/2023 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046 FCC ID: 2AAGMGC02SA To whom it may concern:

We, Sequans Communications 90 Washington Valley Rd, Bedminster, New Jersey, 7921, USA through the following attestation, hereby address the fourth requirement to support modular approval. This device is designed for mobile or fixed operation; portable operation is subject to a Class 2 permissive change application or to a new and separate FCC ID. The maximum antenna gain is limited to those calculated in the RF exposure exhibit. The product has an FCC ID label on the device itself. Also, the OEM host product manufacturer will be informed to display a label referring to the enclosed module. We request to include in the grant the following words in the device description or grant notes: modular transmitter or transmitter module. If there are any additional questions or if further information is needed, please contact us. Sincerely, ________________________________________ By:

Title:

Telephone:

email:

Sunpreet Kaur NAM & EMEA Certification Manager

+12062476609 skaur@sequans.com