FCC ID: P27WIAD1X ADSL VoIP Router

IP 805/815 VGA/VGB ADSL VoIP Router 802.11g/802.11b Wireless Access Point ADSL VoIP Modem NAT Router User's Guide Table of Contents CHAPTER 1 INTRODUCTION .............................................................................................................. 1 ADSL VoIP Router Features .......................................................................................................... 1 Package Contents ............................................................................................................................. 4 Physical Details ................................................................................................................................ 5 CHAPTER 2 INSTALLATION ............................................................................................................... 8 Requirements .................................................................................................................................... 8 Procedure........................................................................................................................................... 8 CHAPTER 3 SETUP................................................................................................................................10 Overview...........................................................................................................................................10 Configuration Program.................................................................................................................11 Setup Wizard...................................................................................................................................12 Home Screen....................................................................................................................................14 LAN Screen .....................................................................................................................................15 Wireless Screen.............................................................................................................................17 Wireless Security ..........................................................................................................................19 Trusted Wireless Stations............................................................................................................21 Password Screen.............................................................................................................................23 Mode Screen ....................................................................................................................................24 CHAPTER 4 PC CONFIGURATION...................................................................................................25 Overview...........................................................................................................................................25 Windows Clients .............................................................................................................................25 Macintosh Clients...........................................................................................................................36 Linux Clients ...................................................................................................................................36 Other Unix Systems .......................................................................................................................36 Wireless Station Configuration ..................................................................................................37 Wireless Configuration on Windows XP...................................................................................37 CHAPTER 5 OPERATION AND STATUS.........................................................................................46 Operation - Router Mode...............................................................................................................46 Status Screen ..................................................................................................................................46 Connection Status - PPPoE & PPPoA ........................................................................................48 Connection Details - Dynamic IP Address.................................................................................49 Connection Details - Fixed IP Address .......................................................................................51 CHAPTER 6 ADVANCED FEATURES ...............................................................................................52 Overview...........................................................................................................................................52 Internet.............................................................................................................................................52 Dynamic DNS (Domain Name Server)........................................................................................56 Firewall Rules .................................................................................................................................58 User-defined Services ....................................................................................................................63 Options..............................................................................................................................................65 Schedule ...........................................................................................................................................66 Virtual Servers ...............................................................................................................................68 CHAPTER 7 ADVANCED ADMINISTRATION ...............................................................................70 Overview...........................................................................................................................................70 PC Database.....................................................................................................................................71 Config File........................................................................................................................................75 Logging.............................................................................................................................................76 E-mail ................................................................................................................................................78 Diagnostics ......................................................................................................................................80 Remote Admin.................................................................................................................................81 Routing .............................................................................................................................................83 i Upgrade Firmware ..........................................................................................................................87 CHAPTER 8 MODEM MODE...............................................................................................................88 Overview...........................................................................................................................................88 Management Connections .............................................................................................................88 Home Screen....................................................................................................................................89 ADSL Screen...................................................................................................................................90 Operation..........................................................................................................................................90 Status Screen ..................................................................................................................................91 APPENDIX A TROUBLESHOOTING.................................................................................................93 Overview...........................................................................................................................................93 General Problems ...........................................................................................................................93 Internet Access ...............................................................................................................................93 Wireless Access.............................................................................................................................94 APPENDIX B ABOUT WIRELESS LANS .........................................................................................95 Modes ................................................................................................................................................95 BSS/ESS...........................................................................................................................................95 Channels...........................................................................................................................................96 WEP...................................................................................................................................................96 WPA-PSK........................................................................................................................................96 Wireless LAN Configuration.......................................................................................................97 APPENDIX C SPECIFICATIONS........................................................................................................98 Multi-Function ADSL VoIP Router.............................................................................................98 Wireless Interface..........................................................................................................................98 Regulatory Approvals.....................................................................................................................99 Copyright Document Version: 2.6 2004. All Rights Reserved. All trademarks and trade names are the properties of their respective owners. ii Chapter 1 Introduction 1 This Chapter provides an overview of the ADSL VoIP Router's features and capabilities. Congratulations on the purchase of your new ADSL VoIP Router. The ADSL VoIP Router is a multi-function device providing the following services:

ADSL Modem. Shared Broadband Internet Access for all LAN users. Wireless Access Point for 802.11b and 802.11g Wireless Stations. 1 Ethernet port for 10BaseT or 100BaseT connections. 1 FXS for telephone 1 FXO for PSTN Optional USB port for USB connection ADSL VoIP Router Features Figure 1: ADSL VoIP Router The ADSL VoIP Router incorporates many advanced features, carefully designed to provide sophisticated functions while being easy to use. Internet Access Features Shared Internet Access. All users on the LAN or WLAN can access the Internet through the ADSL VoIP Router, using only a single external IP Address. The local (invalid) IP Addresses are hidden from external sources. This process is called NAT (Network Ad-

dress Translation). 1 ADSL VoIP Router User Guide Built-in ADSL Modem. The ADSL VoIP Router has a built-in ADSL modem, support-

ing all common ADSL connections. IPoA, PPPoE, PPPoA, Direct Connection Support. The ADSL VoIP Router sup-

ports all common connection methods. Auto-detection of Internet Connection Method. In most situations, the ADSL VoIP Router can test your ADSL and Internet connection to determine the connection method used by your ISP. Fixed or Dynamic IP Address. On the Internet (WAN port) connection, the ADSL VoIP Router supports both Dynamic IP Address (IP Address is allocated on connection) and Fixed IP Address. Advanced Internet Functions Application Level Gateways (ALGs). Applications which use non-standard connec-

tions or port numbers are normally blocked by the Firewall. The ability to define and allow such applications is provided, to enable such applications to be used normally. Special Applications. This feature, also called Port Triggering, allows you to use Internet applications which normally do not function when used behind a firewall. Virtual Servers. This feature allows Internet users to access Internet servers on your LAN. The required setup is quick and easy. Dynamic DNS Support. DDNS, when used with the Virtual Servers feature, allows users to connect to Servers on your LAN using a Domain Name, even if you have a dy-

namic IP address which changes every time you connect. URL Filter. Use the URL Filter to block access to undesirable Web sites by LAN users. Firewall. As well as the built-in firewall to protect your LAN, you can define Firewall Rules to determine which incoming and outgoing traffic should be permitted. Scheduling. Both the URL Filter and Firewall rules can be scheduled to operate only at certain times. This provides great flexibility in controlling Internet -bound traffic. Logs. Define what data is recorded in the Logs, and optionally send log data to a Syslog Server. Log data can also be E-mailed to you. VPN Pass through Support. PCs with VPN (Virtual Private Networking) software using PPTP, L2TP and IPSec are transparently supported - no configuration is required. Wireless Features Standards Compliant. The ADSL VoIP Router complies with the IEEE802.11g (DSSS) specifications for Wireless LANs. Supports both 802.11b and 802.11g Wireless Stations. The 802.11g standard provides for backward compatibility with the 802.11b standard, so both 802.11b and 802.11g Wireless stations can be used simultaneously. Speeds to 54Mbps. All speeds up to the 802.11g maximum of 54Mbps are supported. WEP support. Support for WEP (Wired Equivalent Privacy) is included. Key sizes of 64 Bit and 128 Bit are supported. WEP encrypts any data before transmission, providing pro-

tection against snoopers. WPA-PSK support. Like WEP, WPA-PSK encrypts any data before transmission, providing protection against snoopers. The WPA-PSK is a later standard than WEP, and provides both easier configuration and greater security than WEP. 2 Introduction Wireless MAC Access Control. The Wireless Access Control feature can check the MAC address (hardware address) of Wireless stations to ensure that only trusted Wireless Stations can access your LAN. Simple Configuration. If the default settings are unsuitable, they can be changed quickly and easily. LAN Features 1 Ethernet port. The ADSL VoIP Router incorporates a 1-port 10/100BaseT, making it easy to create or extend your LAN. 1 Optional USB port. DHCP Server Support. Dynamic Host Configuration Protocol provides a dynamic IP address to PCs and other devices upon request. The ADSL VoIP Router can act as a DHCP Server for devices on your local LAN and WLAN. Configuration & Management Easy Setup. Use your WEB browser from anywhere on the LAN or WLAN for configura-

tion. Configuration File Upload/Download. Save (download) the configuration data from the ADSL VoIP Router to your PC, and restore (upload) a previously-saved configuration file to the ADSL VoIP Router. Remote Management. The ADSL VoIP Router can be managed from any PC on your LAN or Wireless LAN. And, if the Internet connection exists, it can also (optionally) be configured via the Internet. Network Diagnostics. You can use the ADSL VoIP Router to perform a Ping or DNS lookup. Security Features Password - protected Configuration. Password protection is provided to prevent unauthorized users from modifying the configuration data and settings. Wireless LAN Security. WPA-PSK, WEP and Wireless access control by MAC ad-

dress are all supported. The MAC-level access control feature can be used to prevent unknown wireless stations from accessing your LAN. NAT Protection. An intrinsic side effect of NAT (Network Address Translation) tech-

nology is that by allowing all LAN users to share a single IP address, the location and even the existence of each PC is hidden. From the external viewpoint, there is no network, only a single device - the ADSL VoIP Router. Firewall. All incoming data packets are monitored and all incoming server requests are filtered, thus protecting your network from malicious attacks from external sources. Protection against DoS attacks. DoS (Denial of Service) attacks can flood your Internet connection with invalid packets and connection requests, using so much band-

width and so many resources that Internet access becomes unavailable. The ADSL VoIP Router incorporates protection against DoS attacks. 3 ADSL VoIP Router User Guide Voice Features

One FXS analogue phone. Support with switches over to PSTN when power down or ADSL link failed (Life line support)

One FXS analogue phone. S upport with switches over to PSTN when power down or ADSL link failed (Life line support) One FXS analogue phone Support with switches over to PSTN when power down or ADSL link failed Wireless LAN Security. WPA-PSK, WEP and Wireless access control by MAC ad-

dress are all supported. The MAC-level access control feature can be used to prevent unknown wireless stations from accessing your LAN.

One FXS analogue phone support with switches over to PSTN when power down or ADSL link failed (Life line support) Package Contents The following items should be included. If any of these items are damaged or missing, please contact your dealer immediately. The ADSL VoIP Router Unit 1 Cat-5 Ethernet (LAN) cable 1 RJ-11 (ADSL) cable 1 RJ-11 to RJ45 cable (Germany only) 1 USB cable (Optional) Power Adapter Quick Installation Guide CD-ROM containing the on-line manual. 4 Introduction Physical Details Front-mounted LEDs Power LED

(Green) Status LED

(Yellow) LAN Figure 2: Front Panel On - Power on. Off - No power. Off - Normal operation. Blinking - This LED blinks during start up, and during a Firmware Upgrade. For each port, there are 2 LEDs, to indicate the connection speed (10BaseT or 100BaseT) of each port. 100BT - This will be ON if the LAN connection is using 100BaseT, and Blinking if data is being transferred via the corresponding LAN port. 10BT - This will be ON if the LAN connection is using 10BaseT, and Blink-

ing if data is being transferred via the corresponding LAN port. If neither LED is on, there is no active connection on the corresponding LAN port. WLAN LED On - Wireless enabled. Off - No Wireless connections currently exist. Flashing - Data is being transmitted or received via the Wireless access point. This includes "network traffic" as well as user data. WAN On - ADSL connection is available. Off - No ADSL connection. Flashing - Data is being transmitted or received via the ADSL connection. PSTN On PSTN connected Off - No PSTN connection. Flashing - Talking Phone On Phone ready/on-hook Off Phone not ready. Flashing quick- Talking Flashing slow- Off-hook Internet On Internet connected Off No Internet connection. Flashing Data is being transmitted 5 ADSL VoIP Router User Guide 6 Introduction Rear Panel Figure 3: Rear Panel Power port Connect the supplied power adapter here. 10/100BaseT LAN connections Use standard LAN cables (RJ45 connectors) to connect your PCs to these ports. Note:

Any LAN port on the ADSL VoIP Router will automatically function as an "Uplink" port when required. Just connect any port to a normal port on the other hub, using a standard LAN cable. This button will reset the ADSL VoIP Router to the factory default settings. To do this, press and hold the Reset Button for five (5) seconds, until the Status LED is lit, then release the Reset Button, and wait the ADSL VoIP Router to restart using the factory default values. Connect this port to your ADSL line. Connect the PSTN line here. Connect the phone here. Reset Button

(Reset to Defaults) WAN port

(ADSL port) PSTN Port Phone USB (Optional) USB type A male connector. 7 Chapter 2 Installation 2 This Chapter covers the physical installation of the ADSL VoIP Router. Requirements Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors. TCP/IP protocol must be installed on all PCs. For Internet Access, an Internet Access account with an ISP, and a DSL connection. To use the Wireless Access Point, all Wireless devices must be compliant with the IEEE 802.11g or IEEE 802.11b specifications. Procedure Figure 4: Installation Diagram 1. Choose an Installation Site Select a suitable place on the network to install the ADSL VoIP Router. For best Wireless reception and performance, the ADSL VoIP Router should be positioned in a central location with minimum obstructions between the ADSL VoIP Router and the PCs. Also, if using multiple Access Points, adjacent Access Points should use different Channels. 8 Installation 2. Connect LAN Cables Use standard LAN cables to connect PCs to the Switching Hub ports on the ADSL VoIP Router. Both 10BaseT and 100BaseT connections can be used simultaneously. If required, connect any port to a normal port on another Hub, using a standard LAN cable. Any LAN port on the ADSL VoIP Router will automatically function as an "Uplink" port when required. 3. Connect ADSL Cable Connect the supplied ADSL cable from to the WAN port on the ADSL VoIP Router (the RJ11 connector) to the ADSL terminator provided by your phone company. 4. Power Up Connect the supplied power adapter to the ADSL VoIP Router and power up. Use only the power adapter provided. Using a different one may cause hardware damage 5. Check the LEDs The Power LED should be ON. The Status LED should flash, then turn Off. If it stays on or blinking after 60 seconds, there is a hardware error. For each LAN (PC) connection, one of the LAN LEDs should be ON (provided the PC is also ON.) The WLAN LED should be ON The WAN LED should be ON if ADSL line is connected. For more information, refer to Front-mounted LEDs in Chapter 1. 9 Chapter 3 Setup 3 This Chapter provides Setup details of the ADSL VoIP Router. Overview Internet Access This chapter describes the setup procedure for:

LAN configuration Wireless setup Assigning a Password to protect the configuration data. PCs on your local LAN may also require configuration. For details, see Chapter 4 - PC Con-

figuration. Other configuration may also be required, depending on which features and functions of the ADSL VoIP Router you wish to use. Use the table below to locate detailed instructions for the required functions. Refer to:

Chapter 4:

PC Configuration Chapter 5:

Operation and Status Chapter 6:

Advanced Features Chapter 7 Advanced Administration To Do this:

Configure PCs on your LAN. Check ADSL VoIP Router operation and Status. Internet Use any of the following Advanced features:

Dynamic DNS Firewall Rules Firewall Services Schedule Virtual Servers Use any of the following Administration Configuration settings or features:

PC Database Config File Logging E-mail Diagnostics Remote Admin Routing Upgrade Firmware 10 Setup Configuration Program The ADSL VoIP Router contains an HTTP server. This enables you to connect to it, and con-

figure it, using your Web Browser. Your Browser must support JavaScript. The configuration program has been tested on the following browsers:

Netscape V4.08 or later Netscape 7 Internet Explorer V5.01 or later Preparation Before attempting to configure the ADSL VoIP Router, please ensure that:

Your PC can establish a physical connection to the ADSL VoIP Router. The PC and the ADSL VoIP Router must be directly connected (using the Hub ports on the ADSL VoIP Router) or on the same LAN segment. The ADSL VoIP Router must be installed and powered ON. If the ADSL VoIP Router's default IP Address (192.168.0.1) is already used by another device, the other device must be turned OFF until the ADSL VoIP Router is allocated a new IP Address during configuration. Using your Web Browser To establish a connection from your PC to the ADSL VoIP Router:

1. After installing the ADSL VoIP Router in your LAN, start your PC. If your PC is already running, restart it. 2. Start your WEB browser. 3. In the Address box, enter "HTTP://" and the IP Address of the ADSL VoIP Router, as in this example, which uses the ADSL VoIP Router's default IP Address:

HTTP://192.168.0.1 4. When prompted for the User name and Password, enter values as follows:

User name admin Password password 11 ADSL VoIP Router User Guide If you can't connect If the ADSL VoIP Router does not respond, check the following:

The ADSL VoIP Router is properly installed, LAN connection is OK, and it is powered ON. You can test the connection by using the "Ping" command:

Open the MS-DOS window or command prompt window. Enter the command:

ping 192.168.0.1 If no response is received, either the connection is not working, or your PC's IP address is not compatible with the ADSL VoIP Router's IP Address.

(See next item.) If your PC is using a fixed IP Address, its IP Address must be within the range 192.168.0.2 to 192.168.0.254 to be compatible with the ADSL VoIP Router's de-

fault IP Address of 192.168.0.1. Also, the Network Mask must be set to 255.255.255.0. See Chapter 4 - PC Configuration for details on checking your PC's TCP/IP settings. Ensure that your PC and the ADSL VoIP Router are on the same network segment. (If you don't have a router, this must be the case.) Ensure you are using the wired LAN interface. The Wireless interface can only be used if its configuration matches your PC's wireless settings. Setup Wizard The first time you connect to the ADSL VoIP Router, the Setup Wizard will run automatically.

(The Setup Wizard will also run if the ADSL VoIP Router's default settings are restored.) 5. Step through the Wizard until finished. You need the data supplied by your ISP. Most connection methods require some data input. The common connection types are explained in the following table. 6. On the final screen of the Wizard, run the test and check that an Internet connection can be established. If the connection test fails:

Check all connections, and the front panel LEDs. Check that you have entered all data correctly. 7. 12 Setup Common Connection Types Type Dynamic IP Address Details ISP Data required Your IP Address is allocated automatically, when you connect to you ISP. a) ADSL parameters (VPI and VCI) may be required, if they cannot be detected automatically. Static (Fixed) IP Address Your ISP allocates a permanent IP Address to you. Usually, the connection is "Al-

ways on". b) Some ISP's may require you to use a particular Hostname or Domain name, or MAC (physical) address. a) ADSL parameters (VPI and VCI) may be required, if they cannot be detected automatically. b) IP Address allocated to you, and related information, such as Network Mask, Gateway IP address, and DNS address. PPPoE, PPPoA You connect to the ISP only when required. The IP address is usually allocated automatically. a) ADSL parameters (VPI and VCI) may be required, if they cannot be detected automatically. IPoA

(IP over ATM) Normally, the connection is

"Always on". b) User name and password are always required. c) If using a Static (Fixed) IP address, you need the IP address and related information (Network Mask, Gateway IP address, and DNS address) a) ADSL parameters (VPI and VCI) may be required, if they cannot be detected automatically. b) IP Address allocated to you, and related information, such as Network Mask, Gateway IP address, and DNS address. 13 ADSL VoIP Router User Guide Home Screen After finishing the Setup Wizard, you will see the Home screen. When you connect in future, you will see this screen when you connect. An example screen is shown below. Figure 5: Home Screen Main Menu The main menu, on the left, contains links to the most-commonly used screen. To see the links to the other available screens, click "Advanced" or "Administration". The main menu als o contains two (2) buttons:

Log Out - When finished, you should click this button to logout. Restart - Use this if you wish to restart the ADSL VoIP Router. Note that restarting the Router will break any existing connections to or through the Router. Navigation & Data Input Use the menu bar on the left of the screen, and the "Back" button on your Browser, for navigation. Changing to another screen without clicking "Save" does NOT save any changes you may have made. You must "Save" before changing screens or your data will be ignored. On each screen, clicking the "Help" button will display help for that screen. 14 Setup LAN Screen Use the LAN link on the main menu to reach the LAN screen. An example screen is shown below. Figure 6: LAN Screen Data - LAN Screen TCP/IP IP Address Subnet Mask DHCP Server DHCP IP address for the ADSL VoIP Router, as seen from the local LAN. Use the default value unless the address is already in use or your LAN is using a different IP address range. In the latter case, enter an unused IP Address from within the range used by your LAN. The default value 255.255.255.0 is standard for small (class "C") net-

works. For other networks, use the Subnet Mask for the LAN segment to which the ADSL VoIP Router is attached (the same value as the PCs on that LAN segment). If Enabled, the ADSL VoIP Router will allocate IP Addresses to PCs

(DHCP clients) on your LAN when they start up. The default (and recommended) value is Enabled. If you are already using a DHCP Server, this setting must be Disabled, and the existing DHCP server must be re-configured to treat the ADSL VoIP Router as the default Gateway. See the follow-

ing section for further details. The Start IP Address and Finish IP Address fields set the values used by the DHCP server when allocating IP Addresses to DHCP clients. This range also determines the number of DHCP clients supported. See the following section for further details on using DHCP. What DHCP Does A DHCP (Dynamic Host Configuration Protocol) Server allocates a valid IP address to a DHCP Client (PC or device) upon request. The client request is made when the client device starts up (boots). The DHCP Server provides the Gateway and DNS addresses to the client, as well as allocating an IP Address. 15 ADSL VoIP Router User Guide The ADSL VoIP Router can act as a DHCP server. Windows 95/98/ME and other non-Server versions of Windows will act as a DHCP client. This is the default Windows setting for the TCP/IP network protocol. However, Windows uses the term Obtain an IP Address automatically instead of "DHCP Client". You must NOT have two (2) or more DHCP Servers on the same LAN segment. (If your LAN does not have other Routers, this means there must only be one (1) DHCP Server on your LAN.) Using the ADSL VoIP Router's DHCP Server This is the default setting. The DHCP Server settings are on the LAN screen. On this screen, you can:

Enable or Disable the ADSL VoIP Router's DHCP Server function. Set the range of IP Addresses allocated to PCs by the DHCP Server function. You can assign Fixed IP Addresses to some devices while using DHCP, provided that the Fixed IP Addresses are NOT within the range used by the DHCP Server. Using another DHCP Server You can only use one (1) DHCP Server per LAN segment. If you wish to use another DHCP Server, rather than the ADSL VoIP Router's, the following procedure is required. Disable the DHCP Server feature in the ADSL VoIP Router. This setting is on the LAN screen. Configure the DHCP Server to provide the ADSL VoIP Router's IP Address as the Default Gateway. To Configure your PCs to use DHCP This is the default setting for TCP/IP for all non-Server versions of Windows. See Chapter 4 - Client Configuration for the procedure to check these settings. 16 Setup Wireless Screen The ADSL VoIP Router's settings must match the other Wireless stations. Note that the ADSL VoIP Router will automatically accept both 802.11b and 802.11g connec-

tions, and no configuration is required for this feature. To change the ADSL VoIP Router's default settings for the Wireless Access Point feature, use the Wireless link on the main menu to reach the Wireless screen. An example screen is shown below. Figure 7: Wireless Screen Data - Wireless Screen Identification Station name SSID

(ESSID) This is the same as the "Device Name" for the ADSL VoIP Router. If using an ESS (Extended Service Set, with multiple access points) this ID is called an ESSID (Extended Service Set Identifier). To communicate, all Wireless stations should use the same SSID/ESSID. 17 ADSL VoIP Router User Guide Options Mode Channel No. Broadcast SSID Select the desired mode:

g & b - Both 802.11.g and 802.11b Wireless stations will be able to use the ADSL VoIP Router. g only - Only 802.11g Wireless stations can use the ADSL VoIP Router. b only - Only 802.11b connections are available. 802.11g Wireless Stations will only be able to use the ADSL VoIP Router if they are fully backward-compatible with the 802.11b standard. Channel 1-11 is allowed in USA. If you experience interference (shown by lost connections and/or slow data transfers) you may need to experiment with different channels to see which is the best. If using multiple Access Points, adjacent Access Points should use different Channels to reduce interference. If enabled, the ADSL VoIP Router will broadcast its SSID. This allows PCs and other wireless stations to detect this Access Point and use the correct SSID. If disabled, PC users will have to manually enter the SSID and other details of the wireless interface before they can connect to this Access Point. Wireless Security Current Setting The current Wireless security is displayed. The default value is dis-

abled. Configure Button Click this button to access the Wireless security sub-screen, and view or change the settings. See the following section for details. Access Point Enable Wireless Access Point Allow access by Set Stations Button Enable this if you want to use Wireless Access Point function. If disabled, no Wireless stations can use the Access Point function, and all connections must be make via the wired LAN. Use this feature to determine which Wireless stations can use the Access Point. The options are:

All Wireless Stations - All wireless stations can use the access point, provided they have the correct SSID and security settings. Trusted Wireless stations only - Only wireless stations you designate as "Trusted" can use the Access Point, even if they have the correct SSID and security settings. This feature uses the MAC address to identify Wireless stations. The MAC address is a low-level network identifier which is unique to each PC or network device. To define the trusted wireless stations, use the "Set Stations" but-

ton. Click this button to manage the trusted PC database. 18 Setup Wireless Security This screen is accessed by clicking the "Configure" button on the Wireless screen. There are 3 options for Wireless security:

Disabled - no data encryption is used. WEP - data is encrypted using the WEP standard. WPA-PSK - data is encrypted using the WPA-PSK standard. This is a later standard than WEP, and provides much better security than WEP. If all your Wireless stations support WPA-PSK, you should use WPA-PSK rather than WEP. WEP Wireless Security Figure 8: WEP Data - WEP Screen WEP Data Encryption WEP Data En-

cryption Authentication Type Default Key Select the option to match other Wireless Stations:

64 Bit - data is encrypted, using the default key, before being transmitted. You must enter at least the default key. For 64 Bit En-

cryption, the key size is 10 chars in HEX (0~9 and A~F). 128 Bit - data is encrypted, using the default key, before being transmitted. You must enter at least the default key. For 128 Bit En-

cryption, the key size is 26 chars in HEX (0~9 and A~F). Normally, this should be left at the default value of "Automatic". If changed to "Open System" or "Shared Key", ensure that your Wireless Stations use the same setting. Select the key you wish to be the default. Transmitted data is ALWAYS encrypted using the Default Key; the other Keys are for decryption only. You must enter a Key Value for the Default Key. 19 ADSL VoIP Router User Guide Key Value Passphrase Enter the key value or values you wish to use. The Default Key is required, the other keys are optional. Other stations must have the same key. If desired, you can generate a key from a phrase, instead of entering the key value directly. Enter the desired phrase, and click the "Generate Keys" button. WPA-PSK Wireless Security Figure 9: WPA-PSK Data - WPA-PSK Screen WPA-PSK Like WEP, data is encrypted before transmission. WPA is more secure than WEP, and should be used if possible. WPA-PSK is the version of WPA, which does NOT require a Radius Server on your LAN. Enter the PSK (network key). Data is encrypted using a key derived from the network key. Other Wireless Stations must use the same network key. The PSK must be from 8 to 63 characters in length. The WPA-PSK standard allows different encryption methods to be used. Select the desired option. Wireless Stations must use the same encryption method. Security System PSK WPA Encryption 20 Setup Trusted Wireless Stations This feature can be used to prevent unknown Wireless stations from using the Access Point. This list has no effect unless the setting Allow access by trusted stations only is enabled. To change the list of trusted wireless stations, use the Modify List button on the Access Con-

trol screen. You will see a screen like the sample below. Figure 10: Trusted Wireless Stations Data - Trusted Wireless Stations Trusted Wireless Stations This lists any Wireless Stations which you have designated as Trusted. Other Wireless Stations This list any Wireless Stations detected by the Access Point, which you have not designated as "Trusted". Name Address Buttons

<<

>>

The name assigned to the Trusted Wireless Station. Use this when adding or editing a Trusted Station. The MAC (physical) address of the Trusted Wireless Station. Use this when adding or editing a Trusted Station. Add a Trusted Wireless Station to the list (move from the "Other Stations" list). Select an entry (or entries) in the "Other Stations" list, and click the " << " button. Enter the Address (MAC or physical address) of the wireless station, and click the "Add " button. Delete a Trusted Wireless Station from the list (move to the "Other Stations" list). Select an entry (or entries) in the "Trusted Stations" list. Click the " >> " button. 21 ADSL VoIP Router User Guide Edit 8. To change an exis ting entry in the "Trusted Stations" list, select it and click this button. 1. Select the Station in the Trusted Station list. 2. Click the Edit button. The address will be copied to the "Ad-

dress" field, and the Add button will change to Update. 3. Edit the address (MAC or physical address) as required. 4. Click Update to save your changes. Add (Update) To add a Trusted Station which is not in the "Other Wireless Sta-

tions" list, enter the required data and click this button. When editing an existing Wireless Station, this button will change from Add to Update. Clear Clear the Name and Address fields. 22 Setup Password Screen The password screen allows you to assign a password to the ADSL VoIP Router. Figure 11: Password Screen Old Password Enter the existing password in this field. New password Enter the new password here. Verify password Re-enter the new password here. You will be prompted for the password when you connect, as shown below. Figure 12: Password Dialog The "User Name" is always admin Enter the password for the ADSL VoIP Router, as set on the Password screen above. 23 ADSL VoIP Router User Guide Mode Screen Use this screen to change the mode between Router mode and Modem (Bridge) mode. Figure 13: Mode Screen Select the desired option, and click "Save". Router Modem Both the ADSL Modem and the Router features are operational. In this mode, this device can provide shared Internet Access to all your LAN users. Also, by default, it acts a DHCP Server, providing an IP address and related infor-

mation to all Wireless and LAN users. Only the ADSL Modem component is operational. All Router features are disabled. This device is "transparent" - it does not perform any operations or make any changes to the network traffic passing through it. You need to have a DHCP Server on your LAN to provide IP addresses to the Wireless clients using this Access Point. All traffic received on either the Wireless or LAN interface will be sent over the ADSL connection. Notes:

Generally, you should NOT use modem mode. Only select this mode if you are sure this is what you want. After changing the mode, this device will restart, which will take a few seconds. The menu will also change, depending on the mode you are in. The Wireless Access Point can function in either Router or Modem mode. But generally it is not a good idea to combine a Modem with an Access Point, because all data received from the wireless stations will be sent over the modem connection. (Since the modem is transparent, it does not examine the traffic to determine whether the traffic is for the LAN or the WAN.) For details on using Modem Mode, see Chapter 8. 24 Chapter 4 PC Configuration 4 This Chapter details the PC Configuration required on the local ("Internal") LAN. Overview For each PC, the following may need to be configured:

TCP/IP network settings Wireless configuration Internet Access configuration Windows Clients This section describes how to configure Windows clients for Internet access via the ADSL VoIP Router. The first step is to check the PC's TCP/IP settings. The ADSL VoIP Router uses the TCP/IP network protocol for all functions, so it is essential that the TCP/IP protocol be installed and configured on each PC. TCP/IP Settings - Overview If using the default ADSL VoIP Router settings, and the default Windows TCP/IP settings, no changes need to be made. By default, the ADSL VoIP Router will act as a DHCP Server, automatically providing a suitable IP Address (and related information) to each PC when the PC boots. For all non-Server versions of Windows, the default TCP/IP setting is to act as a DHCP client. If using a Fixed (specified) IP address, the following changes are re-

quired:

The Gateway must be set to the IP address of the ADSL VoIP Router The DNS should be set to the address provided by your ISP. If your LAN has a Router, the LAN Administrator must re-

configure the Router itself. Refer to Chapter 8 - Advanced Setup for details. 25 ADSL VoIP Router User Guide Checking TCP/IP Settings - Windows 9x/ME:

1. Select Control Panel - Network. You should see a screen like the following:

Figure 14: Network Configuration 2. Select the TCP/IP protocol for your network card. 3. Click on the Properties button. You should then see a screen like the following. Figure 15: IP Address (Win 95) Ensure your TCP/IP settings are correct, as follows:

Using DHCP To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Windows setting. Using this is recommended. By default, the ADSL VoIP Router will act as a DHCP Server. Restart your PC to ensure it obtains an IP Address from the ADSL VoIP Router. Using "Specify an IP Address"

If your PC is already configured, check with your network administrator before making the following changes:

26 PC Configuration On the Gateway tab, enter the ADSL VoIP Router's IP address in the New Gateway field and click Add, as shown below. Your LAN administrator can advise you of the IP Address they assigned to the ADSL VoIP Router. Figure 16: Gateway Tab (Win 95/98) On the DNS Configuration tab, ensure Enable DNS is selected. If the DNS Server Search Order list is empty, enter the DNS address provided by your ISP in the fields beside the Add button, then click Add. Figure 17: DNS Tab (Win 95/98) 27 ADSL VoIP Router User Guide Checking TCP/IP Settings - Windows NT4.0 1. Select Control Panel - Network, and, on the Protocols tab, select the TCP/IP protocol, as shown below. 2. Click the Properties button to see a screen like the one below. Figure 18: Windows NT4.0 - TCP/IP 28 PC Configuration Figure 19: Windows NT4.0 - IP Address 3. Select the network card for your LAN. 4. Select the appropriate radio button - Obtain an IP address from a DHCP Server or Specify an IP Address, as explained below. Obtain an IP address from a DHCP Server This is the default Windows setting. Using this is recommended. By default, the ADSL VoIP Router will act as a DHCP Server. Restart your PC to ensure it obtains an IP Address from the ADSL Vo IP Router. Specify an IP Address If your PC is already configured, check with your network administrator before making the following changes. 1. The Default Gateway must be set to the IP address of the ADSL VoIP Router. To set this:

Click the Advanced button on the screen above. On the following screen, click the Add button in the Gateways panel, and enter the ADSL VoIP Router's IP address, as shown in Figure 20 below. If necessary, use the Up button to make the ADSL VoIP Router the first entry in the Gateways list. 29 ADSL VoIP Router User Guide Figure 20 - Windows NT4.0 - Add Gateway 2. The DNS should be set to the address provided by your ISP, as follows:

Click the DNS tab. On the DNS screen, shown below, click the Add button (under DNS Service Search Order), and enter the DNS provided by your ISP. Figure 21: Windows NT4.0 - DNS 30 PC Configuration Checking TCP/IP Settings - Windows 2000:

1. Select Control Panel - Network and Dial-up Connection. 2. Right - click the Local Area Connection icon and select Properties. You should see a screen like the following:

Figure 22: Network Configuration (Win 2000) 3. Select the TCP/IP protocol for your network card. 4. Click on the Properties button. You should then see a screen like the following. Figure 23: TCP/IP Properties (Win 2000) 31 ADSL VoIP Router User Guide 5. Ensure your TCP/IP settings are correct, as described below. Using DHCP To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Windows setting. Using this is recommended. By default, the ADSL VoIP Router will act as a DHCP Server. Restart your PC to ensure it obtains an IP Address from the ADSL VoIP Router. Using a fixed IP Address ("Use the following IP Address") If your PC is already configured, check with your network administrator before making the following changes. Enter the ADSL VoIP Router's IP address in the Default gateway field and click OK. (Your LAN administrator can advise you of the IP Address they assigned to the ADSL VoIP Router.) If the DNS Server fields are empty, select Use the following DNS server addresses, and enter the DNS address or addresses provided by your ISP, then click OK. 32 PC Configuration Checking TCP/IP Settings - Windows XP 1. Select Control Panel - Network Connection. 2. Right click the Local Area Connection and choose Properties. You should see a screen like the following:

Figure 24: Network Configuration (Windows XP) 3. Select the TCP/IP protocol for your network card. 4. Click on the Properties button. You should then see a screen like the following. 33 ADSL VoIP Router User Guide Figure 25: TCP/IP Properties (Windows XP) 5. Ensure your TCP/IP settings are correct. Using DHCP To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Windows setting. Using this is recommended. By default, the ADSL VoIP Router will act as a DHCP Server. Restart your PC to ensure it obtains an IP Address from the ADSL VoIP Router. Using a fixed IP Address ("Use the following IP Address") If your PC is already configured, check with your network administrator before making the following changes. In the Default gateway field, enter the ADSL VoIP Router's IP address and click OK. Your LAN administrator can advise you of the IP Address they assigned to the ADSL VoIP Router. If the DNS Server fields are empty, select Use the following DNS server addresses, and enter the DNS address or addresses provided by your ISP, then click OK. 34 PC Configuration Internet Access To configure your PCs to use the ADSL VoIP Router for Internet access:

Ensure that the DSL modem, Cable modem, or other permanent connection is functional. Use the following procedure to configure your Browser to access the Internet via the LAN, rather than by a Dial-up connection. For Windows 9x/ME/2000 1. Select Start Menu - Settings - Control Panel - Internet Options. 2. Select the Connection tab, and click the Setup button. 3. Select "I want to set up my Internet connection manually, or I want to connect through a local area network (LAN)" and click Next. 4. Select "I connect through a local area network (LAN)" and click Next. 5. Ensure all of the boxes on the following Local area network Internet Configuration screen are unchecked. 6. Check the "No" option when prompted "Do you want to set up an Internet mail account now?". 7. Click Finish to close the Internet Connection Wizard. Setup is now completed. For Windows XP 1. Select Start Menu - Control Panel - Network and Internet Connections. 2. Select Set up or change your Internet Connection. 3. Select the Connection tab, and click the Setup button. 4. Cancel the pop-up "Location Information" screen. 5. Click Next on the "New Connection Wizard" screen. 6. Select "Connect to the Internet" and click Next. 7. Select "Set up my connection manually" and click Next. 8. Check "Connect using a broadband connection that is always on" and click Next. 9. Click Finish to close the New Connection Wizard. Setup is now completed. Accessing AOL To access AOL (America On Line) through the ADSL VoIP Router, the AOL for Windows software must be configured to use TCP/IP network access, rather than a dial-up connection. The configuration process is as follows:

Start the AOL for Windows communication software. Ensure that it is Version 2.5, 3.0 or later. This procedure will not work with earlier versions. Click the Setup button. Select Create Location, and change the location name from "New Locality" to "ADSL VoIP Router". Click Edit Location. Select TCP/IP for the Network field. (Leave the Phone Number blank.) Click Save, then OK. Configuration is now complete. Before clicking "Sign On", always ensure that you are using the "ADSL VoIP Router"

location. 35 ADSL VoIP Router User Guide Macintosh Clients From your Macintosh, you can access the Internet via the ADSL VoIP Router. The procedure is as follows. 1. Open the TCP/IP Control Panel. 2. Select Ethernet from the Connect via pop-up menu. 3. Select Using DHCP Server from the Configure pop-up menu. The DHCP Client ID field can be left blank. 4. Close the TCP/IP panel, saving your settings. Note:

If using manually assigned IP addresses instead of DHCP, the required changes are:

Set the Router Address field to the ADSL VoIP Router's IP Address. Ensure your DNS settings are correct. Linux Clients To access the Internet via the ADSL VoIP Router, it is only necessary to set the ADSL VoIP Router as the "Gateway". Ensure you are logged in as "root" before attempting any changes. Fixed IP Address By default, most Unix installations use a fixed IP Address. If you wish to continue using a fixed IP Address, make the following changes to your configuration. Set your "Default Gateway" to the IP Address of the ADSL VoIP Router. Ensure your DNS (Name server) settings are correct. To act as a DHCP Client (recommended) The procedure below may vary according to your version of Linux and X -windows shell. 1. Start your X Windows client. 2. Select Control Panel - Network 3. Select the "Interface" entry for your Network card. Normally, this will be called "eth0". 4. Click the Edit button, set the "protocol" to "DHCP", and save this data. 5. To apply your changes Use the "Deactivate" and "Activate" buttons, if available. OR, restart your system. Other Unix Systems To access the Internet via the ADSL VoIP Router:

Ensure the "Gateway" field for your network card is set to the IP Address of the ADSL VoIP Router. Ensure your DNS (Name Server) settings are correct. 36 PC Configuration Wireless Station Configuration This section applies to all Wireless stations wishing to use the ADSL VoIP Router's Access Point, regardless of the operating system which is used on the client. To use the Wireless Access Point in the ADSL VoIP Router, each Wireless Station must have compatible settings, as follows:

Mode The mode must be set to Infrastructure (rather than Ad-hoc) Access points only operate in Infrastructure mode. SSID (ESSID) This must match the value used on the ADSL VoIP Router. The default value is Wireless. Note! The SSID is case sensitive. Wireless Security By default, Wireless security on the ADSL VoIP Router is disabled. If Wireless security remains disabled on the ADSL VoIP Router, all stations must have wireless security disabled. If Wireless security is enabled on the Wireless Router (either WEP or WPA-PSK), each station must use the same settings as the Wireless ADLS Router. Wireless Configuration on Windows XP If using Windows XP to configure the Wireless interface on your PC, the configuration proce-

dure is as follows:

1. Open the Network Connections folder. (Start - Settings - Network Connections). Figure 26: Network Connections (Windows XP) 2. Right-click the Wireless Network Connection, check that it is enabled (menu option says Disable, rather than Enable) and then select View Available Wireless Networks. 3. You will then see a list of wireless networks. 37 ADSL VoIP Router User Guide Figure 27 Wireless Networks (Windows XP) If the "Broadcast SSID" setting on the ADSL VoIP Router has been disabled, its SSID will NOT be listed. See the following section "If the SSID is not listed" for details of dealing with this situation. 4. The next step depends on whether or not Wireless security has been enabled on the ADSL VoIP Router. If Wireless Security is Disabled If Wireless security on the ADSL VoIP Router is disabled, Windows will warn you that the Wireless network is not secure. Figure 28 Wireless Networks (Windows XP) To connect:

Check the checkbox Allow me to connect to the selected wireless network, even though it is not secure. 38 PC Configuration The Connect button will then be available. Click the Connect button, and wait a few sec-

onds for the connection to be established. If using WEP Data Encryption If WEP data encryption has been enabled on the ADSL VoIP Router, Windows will detect this, and show a screen like the following. Figure 29: WEP (Windows XP) To connect:

Enter the WEP key, as set on the ADSL VoIP Router, in the Network Key field. Re-enter the WEP key into the Confirm Network key field. Disable the checkbox Enable IEEE 802.1x authentication for this network. Click the Connect button. If this fails, click the Advanced button, to see a screen like the following:

39 ADSL VoIP Router User Guide Figure 30: Advanced - Wireless Networks Select the SSID for the ADSL VoIP Router, and click Configure, to see a screen like the follow-

ing:

Figure 31: Wireless Network Properties - WEP Configure this screen as follows:

Set Network Authentication to match the ADSL VoIP Router. (If the setting on the ADSL VoIP Router is "Auto", then either Open or Shared can be used.) For Data Encryption, select WEP. For the Network key and Confirm network key, enter the default key value used on the ADSL VoIP Router. (Windows will determine if 64bit or 128bit encryption is used.) The Key index must match the default key index on the ADSL VoIP Router. The default value is 1. 40 PC Configuration Ensure the options The key is provided for me automatically and This is a computer-to-

computer (ad hoc) network are unchecked. Click OK to save and close this dialog. This wireless network will now be listed in Preferred Networks on the screen below. Figure 32: Preferred Networks Click OK to establish a connection to the ADSL VoIP Router. If using WPA-PSK Data Encryption If WPA-PSK data encryption has been enabled on the ADSL VoIP Router, it does not matter which network is selected on the screen below. Just click the Advanced button. Figure 33: Wireless Networks (Windows XP) You will then see a screen like the example below. 41 ADSL VoIP Router User Guide Figure 34: Advanced - Wireless Networks Select the SSID for the ADSL VoIP Router, and click Configure, to see a screen like the follow-

ing:

Figure 35: Wireless Network Properties- WPA-PSK Configure this screen as follows:

Set Network Authentication to WPA-PSK. For Data Encryption, select TKIP. For the Network key and Confirm network key, enter the network key (PSK) used on the ADSL VoIP Router. Ensure the option This is a computer-to-computer (ad hoc) network is unchecked. Click OK to save and close this dialog. This wireless network will now be listed in Preferred Networks on the screen below. 42 PC Configuration Figure 36: Preferred Networks Click OK to establish a connection to the ADSL VoIP Router. If the SSID is not listed If the "Broadcast SSID" setting on the ADSL VoIP Router has been disabled, its SSID will NOT be listed on the screen below. Figure 37: Wireless Networks (Windows XP) In this situation, you need to obtain the SSID from your network administrator, then follow this procedure:

1. Click the Advanced button to see a screen like the example below. 43 ADSL VoIP Router User Guide 2. Click the Add button. You will see a screen like the example below. Figure 38: Unlisted Wireless Network Figure 39: Add Wireless Network 3. Configure this screen as follows:

Enter the correct SSID, as used on the ADSL VoIP Router. Remember the SSID is case-

sensitive, so be sure to match the case, not just the spelling. Set Network Authentication and Data Encryption to match the ADSL VoIP Router. If using data encryption (WEP or WPA-PSK), enter the key used on the ADSL VoIP Router. See the preceding sections for details of WEP and WPA-PSK. Uncheck the options The key is provided for me automatically and This is a com-

puter-to-computer (ad hoc) network. Click OK to save and exit. 44 PC Configuration 4. This wireless network will then be listed in Preferred Networks on the screen below. Figure 40: Preferred Networks 5. Click OK to establish a connection to the ADSL VoIP Router. 45 Chapter 5 Operation and Status 5 This Chapter details the operation of the ADSL VoIP Router and the status screens. For Details of operation in Bridge (Modem) mode, see Chapter 8 -

Modem Mode. Operation - Router Mode Once both the ADSL VoIP Router and the PCs are configured, operation is automatic. However, there are some situations where additional Internet configuration may be required. Refer to Chapter 6 - Advanced Features for further details. Status Screen Use the Status link on the main menu to view this screen. Figure 41: Status Screen 46 Operation and Status Data - Status Screen System Device Name The current name of the ADSL VoIP Router. This is also the

"hostname" provided to ISPs who request this information. Firmware Version The version of the current firmware installed. Modem Modem Status This indicates the status of the ADSL modem comp onent. DownStream Connection Speed If connected, displays the speed for the Down Stream (download) ADSL Connection. UpStream Connection Speed If connected, displays the speed for the Up Stream (upload) ADSL Connection. VPI VCI Internet Connection Method Internet Connection Internet IP Address Connection Details LAN IP Address Network Mask DHCP Server MAC Address This displays the current VPI setting used for the ADSL connec-

tion. This displays the current VCI setting used for the ADSL connec-

tion. This indicates the current connection method, as set in the Setup Wizard. This indicates the current status of the Internet Connection Active - Connection exists Idle - No current connection, but no error has been detected. This condition normally arises when an idle connection is automatically terminated. Failed - The connection was terminated abnormally. This could be caused by Modem failure, or the loss of the connec-

tion to the ISP's server. If there is an error, you can click the "Connection Details" button to find out more information. This IP Address is allocated by the ISP (Internet Service Provider). If using a dynamic IP address, and no connection currently exists, this information is unavailable. Click this button to open a sub-window and view a detailed description of the current connection. Depending on the type of connection, a "log" may also be available. The IP Address of the ADSL VoIP Router. The Network Mask (Subnet Mask) for the IP Address above. This shows the status of the DHCP Server function. The value will be "Enabled" or "Disabled". This shows the MAC Address for the ADSL VoIP Router, as seen on the LAN interface. 47 ADSL VoIP Router User Guide Wireless Name (SSID) Region Channel Wireless AP Broadcast Name Buttons Connection Details Attached Devices If using an ESS (Extended Service Set, with multiple access points) this ID is called an ESSID (Extended Service Set Identifier). The region can not be changed by users. This shows the Channel currently used, as set on the Wireless screen. This indicates whether or not the Wireless Access Point feature is enabled. This indicates whether or not the SSID is Broadcast. This setting is on the Wireless screen. Click this button to open a sub-window and view a detailed description of the current connection. This will open a sub-window, showing all LAN and Wireless devices currently on the network. Refresh Screen Update the data displayed on screen. Connection Status - PPPoE & PPPoA If using PPPoE (PPP over Ethernet) or PPPoA (PPP over ATM), a screen like the following example will be displayed when the "Connection Details" button is clicked. Figure 42: PPPoE Status Screen Data - PPPoE/PPPoA Screen Connection Time PPPoE Link Status This indicates how long the current connection has been estab-

lished. This indicates whether or not the connection is currently estab-

lished. If the connection does not exist, the "Connect" button can be used to establish a connection. 48 Operation and Status Negotiation IP Address If the connection currently exists, the "Disconnect" button can be used to break the connection. This indicates the status of the PPPoE Server login. The IP Address of this device, as seen by Internet users. This address is allocated by your ISP (Internet Service Provider). Network Mask The Network Mask associated with the IP Address above. Buttons Connect Disconnect Close If not connected, establish a connection to your ISP. If connected to your ISP, hang up the connection. Close this window. Connection Details - Dynamic IP Address If your access method is "Direct" (no login), with a Dynamic IP address, a screen like the following example will be displayed when the "Connection Details" button is clicked. Figure 43: Connection Details - Fixed/Dynamic IP Address Data - Dynamic IP address Internet IP Address The current IP Address of this device, as seen by Internet users. This address is allocated by your ISP (Internet Service Provider). Network Mask The Network Mask associated with the IP Address above. Default Gateway The IP address of the remote Gateway or Router associated with the IP Address above. DHCP Server The IP address of your ISP's DHCP Server. DNS Server The IP address of the Domain Name Server which is currently used. Lease Obtained This indicates when the current IP address was obtained, and how 49 ADSL VoIP Router User Guide Lease Expires long before this IP address allocation (the DCHP lease) expires. Buttons Release Renew If an IP Address has been allocated to the ADSL VoIP Router (by the ISP's DHCP Server, clicking the "Release" button will break the connection and release the IP Address. If the ISP's DHCP Server has NOT allocated an IP Address for the ADSL VoIP Router, clicking the "Renew" button will attempt to re-

establish the connection and obtain an IP Address from the ISP's DHCP Server. Close Close this window. 50 Operation and Status Connection Details - Fixed IP Address If your access method is "Direct" (no login), with a fixed IP address, a screen like the following example will be displayed when the "Connection Details" button is clicked. Figure 44: Connection Details - Fixed/Dynamic IP Address Data - Fixed IP address Screen Internet IP Address The IP Address of this device, as seen by Internet users. This ad-

dress is allocated by your ISP (Internet Service Provider). Network Mask The Network Mask associated with the IP Address above. Default Gateway The IP Address of the remote Gateway or Router associated with the IP Address above. DNS Server The IP Address of the Domain Name Server which is currently used. 51 Chapter 6 Advanced Features This Chapter explains when and how to use the ADSL VoIP Router's "Ad-

vanced" Features. 6 Overview The following advanced features are provided:

Internet:

DMZ URL filter Dynamic DNS Firewall Rules Firewall Services Schedule Virtual Servers Internet This screen provides access to the DMZ, Special Applications and URL Filter features. Figure 45: Internet Screen DMZ This feature, if enabled, allows the DMZ computer on your LAN to be exposed to all users on the Internet. This allows almost any application to be used on the "DMZ PC". The "DMZ PC" will receive all "Unknown" connections and data. If the DMZ feature is enabled, you must select the PC to be used as the "DMZ PC". 52 Advanced Features The "DMZ PC" is effectively outside the Firewall, mak-

ing it more vulnerable to attacks. For this reason, you should only enable the DMZ feature when required. Special Applications If you use Internet applications which use non-standard connections or port numbers, you may find that they do not function correctly because they are blocked by the Wireless Router's firewall. In this case, you can define the application as a "Special Application". The Special Applications screen can be reached by clicking the Special Applications button on the Internet screen. You can then define your Special Applications. You will need detailed information about the application; this is normally available from the supplier of the application. Also, note that the terms "Incoming" and "Outgoing" on this screen refer to traffic from the client (PC) viewpoint Figure 46: Special Applications Screen Data - Special Applications Screen Checkbox Use this to Enable or Disable this Special Application as required. Name Enter a descriptive name to identify this Special Application. 53 ADSL VoIP Router User Guide Type - Select the protocol (TCP or UDP) used when you receive data from the special application or service. (Note: Some applications use dif-

ferent protocols for outgoing and incoming data). Start - Enter the beginning of the range of port numbers used by the application server, for data you receive. If the application uses a single port number, enter it in both the "Start" and "Finish" fields. Finish - Enter the end of the range of port numbers used by the applica-

tion server, for data you receive. Type - Select the protocol (TCP or UDP) used when you send data to the remote system or service. Start - Enter the beginning of the range of port numbers used by the application server, for data you send to it. If the application uses a single port number, enter it in both the "Start" and "Finish" fields. Finish - Enter the end of the range of port numbers used by the applica-

tion server, for data you send to it. If the application uses a single port number, enter it in both the "Start" and "Finish" fields. Incoming Ports Outgoing Ports Using a Special Application Configure the Special Applications screen as required. On your PC, use the application normally. Remember that only one (1) PC can use each Special application at any time. Also, when 1 PC is finished using a particular Special Ap-

plication, there may need to be a "Time-out" before another PC can use the same Special Application. The "Time-out" period may be up to 3 minutes. URL Filter If you want to limit access to certain sites on the Internet, you can use this feature. The URL filter will check each Web site access. If the address, or part of the address, is included in the block site list, access will be denied. On the Advanced Internet screen, select the desired setting:

Disable - disable this feature. Block By Schedule - block according to the settings on the Schedule page. Block Always - allow blocking all of the time, independent of the Schedule page. Click the Configure URL Filter button to open the URL Filter screen, allowing you to create or modify the filter strings which determine which sites will be blocked. The URL Filter screen is displayed when the Configure URL Filter button on the Advanced Internet screen is clicked. 54 Advanced Features Figure 47: URL Filter Screen Data - URL Filter Screen Current Filter Strings Current Filter Strings Add Filter String Trusted PC The list contains the current list of items to block. To add to the list, use the "Add" option below. To delete an entry, select it and click Delete button. To delete all entries, click the Delete All button. To add to the current list, type the word or domain name you want to block into the field provided, then click the Add button. Filter strings should be as specific as possible. Otherwise, you may block access to many more sites than intended. Allow Trusted PC Enable this to allow one computer to have unrestricted access to the Internet. For this PC, the URL filter will be ignored. If enabled, you must select the PC to be the trusted PC. Trusted PC Select the PC to be the Trusted PC. 55 ADSL VoIP Router User Guide Dynamic DNS (Domain Name Server) This free service is very useful when combined with the Virtual Server feature. It allows Inter-

net users to connect to your Virtual Servers using a URL, rather than an IP Address. This also solves the problem of having a dynamic IP address. With a dynamic IP address, your IP address may change whenever you connect, which makes it difficult to connect to you. The DynDNS Service works as follows:

1. You must register for the service at http://www.dyndns.org (Registration is free). Your password will be E-mailed to you. 2. After registration, use the "Create New Host" option (at www.dyndns.org) to request your desired Domain name. 3. Enter your data from www.dyndns.org in the ADSL VoIP Router's DDNS screen. 4. The ADSL VoIP Router will then automatically ensure that your current IP Address is recorded at http://www.dyndns.org 5. From the Internet, users will be able to connect to your Virtual Servers (or DMZ PC) using your Domain name, as shown on this screen. Dynamic DNS Screen Select Advanced on the main menu, then Dynamic DNS, to see a screen like the following:

Figure 48: DDNS Screen Data - Dynamic DNS Screen DDNS Service Use a Dynamic DNS Service DDNS Data Use this to enable or disable the DDNS feature as required. Service Provider Select the desired DDNS Service provider. Host Name User Name Password Enter the domain name allocated to you by the DDNS Service. If you have more than one name, enter the name you wish to use. Enter your Username for the DDNS Service. Enter your current password for the DDNS Service. Domain Name Enter the domain name allocated to you by the DDNS Service. If you 56 Advanced Features DDNS Status have more than one name, enter the name you wish to use. This message is returned by the DDNS Server Normally, this message should be "Update successful"

If the message is "No host", this indicates the host name entered was not allocated to you. You need to connect to DDNS Service provider and correct this problem. 57 ADSL VoIP Router User Guide Firewall Rules The Firewall Rules screen allows you to define "Firewall Rules" which can allow or prevent certain traffic. By default:

All Outgoing traffic is permitted. All Incoming traffic is denied.

"Traffic" means incoming connection attempts, not packets. Because of this default behavior, any Outgoing rules will generally Block traffic, and Incoming rules will generally Allow traffic. Firewall Rules Screen An example screen is shown below. Figure 49 Firewall Screen Data - Firewall Rules Incoming Rules

#

For the default rule, this will display "Default". For rules which you create, this will display a radio button which allows you to select the rule. Enable Indicates whether or not the rule is currently enabled. For rules you have added, this column will contain a checkbox, allowing you to easily enable or disable the rule. (Click "Save" after making any changes.) Service Name The Service covered by this rule. Action LAN Server The action performed on connections which are covered by this rule. The PC or Server on your LAN to which traffic covered by this rule will be sent. 58 Advanced Features WAN Users The WAN IP address or addresses covered by this rule. Log Buttons Outgoing Rules

#

Indicates whether or not connections covered by this rule should be logged. Use the Add button to create a new rule. The other buttons - Edit, Move, or Delete - require that a rule be selected first. Use the radio buttons in the left column to select the desired rule. For the default rule, this will display "Default". For rules which you create, this will display a radio button which allows you to select the rule. Enable Indicates whether or not the rule is currently enabled. For rules you have added, this column will contain a checkbox, allowing you to easily enable or disable the rule. (Click "Save" after making any changes.) Service Name The Service covered by this rule. Action The action performed on connections which are covered by this rule. LAN Users The LAN PC or PCs covered by this rule. WAN Servers The WAN IP address or addresses covered by this rule. Indicates whether or not connections covered by this rule should be logged. Use the Add button to create a new rule. The other buttons - Edit, Move, or Delete - require that a rule be selected first. Use the radio buttons in the left column to select the desired rule. Log Buttons 59 ADSL VoIP Router User Guide Incoming Rules This screen is displayed when the "Add" or "Edit" button for Incoming Rules is clicked. Figure 50: Inbound Services Screen Data - Incoming Rules Screen Inbound Services Service Action Send to LAN Server WAN Users Select the desired Service. This determines which packets are covered by this rule. If necessary, you can define a new Service on the "Services"

screen, by defining the protocols and port numbers used by the Service. Select the desired action for packets covered by this rule:

ALLOW always ALLOW by schedule, otherwise Block BLOCK always BLOCK by schedule, otherwise Allow Note:

Any inbound traffic which is not allowed by rules you create will be blocked by the Default rule. BLOCK rules are only useful if the traffic is already covered by an ALLOW rule. (That is, you wish to block a sub-set of traffic which is currently allowed by another rule.) To define the Schedule used in these selections, use the "Schedule"

screen. Select the PC or Server on your LAN which will receive the inbound traffic covered by this rule. These settings determine which packets are covered by the rule, based on their source (WAN) IP address. Select the desired option:

Any - All IP addresses are covered by this rule. Address range - If this option is selected, you must enter the desired values in the "Single/Start" and "Finish" fields to determine the ad-

dress range. Single address - Enter the required address in the "Single/Start"

60 Advanced Features Log fields. This determines whether packets covered by this rule are logged. Select the desired action. Always - always log traffic considered by this rule, whether it matches or not. (This is useful when debugging your rules.) Never - never log traffic considered by this rule, whether it matches or not. Match - Log traffic only it matches this rule. (The action is deter-

mined by this rule.) Not Match - Log traffic which is considered by this rule, but does not match (The action is NOT determined by this rule.) Outgoing Rules This screen is displayed when the "Add" or "Edit" button for Outgoing Rules is clicked. Figure 51: Outbound Services Screen Data - Outbound Rules Screen Outbound Services Service Action Select the desired Service or application to be covered by this rule. If the desired service or application does not appear in the list, you must define it using the "Services" menu option Select the desired action for packets covered by this rule:

BLOCK always BLOCK by schedule, otherwise Allow ALLOW always ALLOW by schedule, otherwise Block Note:

Any outbound traffic which is not blocked by rules you create will be allowed by the Default rule. 61 ADSL VoIP Router User Guide LAN Users WAN Users Log ALLOW rules are only useful if the traffic is already covered by a BLOCK rule. (That is, you wish to allow a subset of traffic which is currently blocked by another rule.) To define the Schedule used in these selections, use the "Schedule"

screen. Select the desired option to determine which PCs are covered by this rule:

Any - All PCs are covered by this rule. Single PC - Only the selected PC is covered by this rule. If selected, you must select the PC. PC - If using Single PC above, select the PC or Server on your LAN which will be covered by this rule. These settings determine which packets are covered by the rule, based on their source (WAN) IP address. Select the desired option:

Any - All IP addresses are covered by this rule. Address range - If this option is selected, you must enter the "Start"

and "Finish" fields. Single address - Enter the required address in the "Single/Start"

fields. This determines whether packets covered by this rule are logged. Select the desired action. Always - always log traffic considered by this rule, whether it matches or not. (This is useful when debugging your rules.) Never - never log traffic considered by this rule, whether it matches or not. Match - Log traffic only it matches this rule. (The action is deter-

mined by this rule.) Not Match - Log traffic which is considered by this rule, but does not match (The action is NOT determined by this rule.) 62 Advanced Features User-defined Services Services are used when creating Firewall Rules. If you wish to create a firewall rule, but the required service is not listed in the "Service" list, you can use this feature to define the required service or services. Once created, these services will be listed in the "Service" list, and can be used when creating Firewall Rules. Figure 52: Add Services Screen Data - User-defined Services Services Existing Services Add Edit Delete This lists any Services you have defined. If you have not defined any Services, this list will be empty. Once you define some services, they will be listed here, and also shown in the Service list used to create Firewall rules. (User-defined services are at the end of the list, after the pre-defined services.) Use this to open a sub-screen where you can add a new service. To modify a service, select it, and then click this button. Use this button to delete the selected service. You can delete any services you have defined. 63 ADSL VoIP Router User Guide Add/Edit Service This screen is displayed when the Add or Edit button on the Services screen is clicked. Figure 53 : Add/Edit Service Data - Add/Edit Service Services Name Type Start Port Finish Port If editing, this shows the current name of the Service. If adding a new service, this will be blank, and you should enter a suitable name. Select the protocol used by the Service. Enter the beginning of the port range used by the Service. Enter the end of the port range used by the Service. 64 Advanced Features Options This screen allows advanced users to enter or change a number of settings. For normal opera-

tion, there is no need to use this screen or change any settings. An example Options screen is shown below. Figure 54: Options Screen Data - Options Screen Internet Respond to Ping If checked, the Wireless Router will repond to Ping (ICMP) packets received from the Internet. If not checked, Ping (ICMP) packets from the Internet will be ignored. Disabling this option provides a slight increase in secu-

rity. MTU Size Enter a value between 1 and 1500. Note: MTU (Maximum Transmission Unit) size should only be changed if advised to do so by Technical Support. UPnP UPnP Advertisement Period Advertisement Time to Live UPnP (Universal Plug and Play) allows automatic discovery and configuration of equipment attached to your LAN. UPnP is by supported Windows ME, XP, or later. If Enabled, this device will be visible via UPnP. Enter the desired value, in minutes. The valid range is from 1 to 1440. If Disabled, this device will not be visible via UPnP. Enter the desired value, in hops. The valid range is from 1 to 255. 65 ADSL VoIP Router User Guide Schedule This Schedule can be used for the Firewall Rules and the URL filter. Figure 55: Schedule Screen Data - Schedule Screen Schedule Day Session 1 Session 2 Start Time Finish Time Local Time Time Zone Each day of the week can scheduled independently. Two (2) separate sessions or periods can be defined. Session 2 can be left blank if not required. Enter the start using a 24 hr clock. Enter the finish time using a 24 hr clock. In order to display your local time correctly, you must select your

"Time Zone" from the list. Use this NTP Server If you prefer to use a particular NTP server as the primary server, check the checkbox "Use this NTP Server" and enter the Server's IP address in the fields provided.. If this setting is not enabled, the default NTP Servers are used. Current Time This displays the current time on the ADSL VoIP Router. 66 Advanced Features 67 ADSL VoIP Router User Guide Virtual Servers This feature, sometimes called Port Forwarding, allows you to make Servers on your LAN accessible to Internet users. Normally, Internet users would not be able to access a server on your LAN because:

Your Server does not have a valid external IP Address. Attempts to connect to devices on your LAN are blocked by the firewall in this device. The "Virtual Server" feature solves these problems and allows Internet users to connect to your servers, as illustrated below. Figure 56: Virtual Servers IP Address seen by Internet Users Note that, in this illustration, both Internet users are connecting to the same IP Address, but using different protocols. To Internet users, all virtual Servers on your LAN have the same IP Address. This IP Address is allocated by your ISP. This address should be static, rather than dynamic, to make it easier for Internet users to con-

nect to your Servers. However, you can use the DDNS (Dynamic DNS) feature to allow users to connect to your Virtual Servers using a URL, instead of an IP Address. Virtual Servers Screen The "Virtual Servers" feature allows Internet Users to access PCs on your LAN. The PCs must be running the appropriate Server Software. For Internet Users, ALL of your Servers have the same IP address. This IP address is allocated by your ISP. To make it easier for Internet users to connect to your Servers, you can use the "DDNS"

feature. This allows Internet users to connect to your Servers with a URL, rather than an IP address. This technology works even if your ISP allocates dynamic IP addresses (IP ad-

dress is allocated upon connection, so it may change each time you connect). 68 Advanced Features Figure 57: Virtual Servers Screen Data - Virtual Servers Screen Servers Servers Properties Enable PC (Server) This lists a number of common Server types. If the desired Server type is not listed, you can create a Firewall Rule to achieve the same effect as the Virtual Server function. Use this to Enable or Disable support for this Server, as required. If Enabled, you must select the PC to which this traffic will be sent. Select the PC for this Server. The PC must be running the appropri-

ate Server software. For each entry, the PC must be running the appropri-

ate Server software. If the desired Server type is not listed, you can define your own Servers, using the Firewall Rules. Connecting to the Virtual Servers Once configured, anyone on the Internet can connect to your Virtual Servers. They must use the Internet IP Address (the IP Address allocated to you by your ISP). e.g. http://203.70.212.52 ftp://203.70.212.52 It is more convenient if you are using a Fixed IP Address from your ISP, rather than Dynamic. However, you can use the Dynamic DNS feature to allow users to connect to your Virtual Servers using a URL, rather than an IP Address. From the Internet, ALL Virtual Servers have the IP Address allocated by your ISP 69 Chapter 7 Advanced Administration 7 This Chapter explains the settings available via the "Administration" section of the menu. Overview Normally, it is not necessary to use these screens, or change any settings. These screens and settings are provided to deal with non-standard situations, or to provide additional options for advanced users. The available settings and features are:

PC Database Config File Logging &

Email This is the list of PCs shown when you select the "DMZ PC" or a "Virtual Server". This database is maintained automatically, but you can add and delete entries for PCs which use a Fixed (Static) IP Address. Backup or restore the configuration file for the ADSL VoIP Router. This file contains all the configuration data. View or clear all logs, set E-Mailing of log files and alerts. Diagnostics Perform a Ping or DNS Lookup. Remote Admin Allow settings to be changed from the Internet.. Routing Only required if your LAN has other Routers or Gateways. Upgrade Firm-

ware Upgrade the Firmware (software) installed in your ADSL VoIP Router. 70 Advanced Features PC Database It eliminates the need to enter IP addresses. The PC Database is used whenever you need to select a PC (e.g. for the "DMZ" PC). Also, you do not need to use fixed IP addresses on your LAN. However, if you do use a fixed IP address on some devices on your LAN, you should enter details of each such device into the PC database, using the PC Database screen. PC Database Screen An example PC Database screen is shown below. Figure 58: PC Database PCs which are "DHCP Clients" are automatically added to the database, and updated as required. By default, non-Server versions of Windows act as "DHCP Clients"; this setting is called

"Obtain an IP Address automatically". The ADSL VoIP Router uses the "Hardware Address" to identify each PC, not the name or IP address. The "Hardware Address" can only change if you change the PC's network card or adapter. This system means you do NOT need to use Fixed (static) IP addresses on your LAN. However, you can add PCs using Fixed (static) IP Addresses to the PC database if required. 71 ADSL VoIP Router User Guide Data - PC Database Screen Known PCs Name IP Address Buttons Add Delete This lists all current entries. Data displayed is name (IP Address) type. The "type" indicates whether the PC is connected to the LAN. If adding a new PC to the list, enter its name here. It is best if this matches the PC's "hostname". Enter the IP Address of the PC. The PC will be sent a "ping" to deter-

mine its hardware address. If the PC is not available (not connected, or not powered On) you will not be able to add it. This will add the new PC to the list. The PC will be sent a "ping" to determine its hardware address. If the PC is not available (not con-

nected, or not powered On) you will not be able to add it. Delete the selected PC from the list. This should be done in 2 situations:

The PC has been removed from your LAN. The entry is incorrect. Refresh Update the data on screen. Generate Report Display a read-only list showing full details of all entries in the PC database. Advanced Administration View the Advanced version of the PC database screen - PC Database

(Admin). See below for details. 72 Advanced Features PC Database (Admin) This screen is displayed if the "Advanced Administration" button on the PC Database is clicked. It provides more control than the standard PC Database screen. Figure 59: PC Database (Admin) Data - PC Database ( Admin) Screen Known PCs This lists all current entries. Data displayed is name (IP Address) type. The "type" indicates whether the PC is connected to the LAN. PC Properties Name IP Address If adding a new PC to the list, enter its name here. It is best if this matches the PC's "hostname". Select the appropriate option:

Automatic - The PC is set to be a DHCP client (Windows: "Obtain an IP address automatically"). The ADSL VoIP Router will allocate an IP address to this PC when requested to do so. The IP address could change, but normally won't. DCHP Client - Reserved IP Address - Select this if the PC is set to be a DCHP client, and you wish to guarantee that the ADSL VoIP Router will always allocate the same IP Address to this PC. Enter the required IP address. Fixed IP Address - Select this if the PC is using a Fixed (Static) IP address. Enter the IP address allocated to the PC. (The PC itself must be configured to use this IP address.) 73 ADSL VoIP Router User Guide MAC Address Buttons Select the appropriate option Automatic discovery - Select this to have the ADSL VoIP Router contact the PC and find its MAC address. This is only possible if the PC is connected to the LAN and powered On. MAC address is - Enter the MAC address on the PC. The MAC address is also called the "Hardware Address", "Physical Ad-

dress", or "Network Adapter Address". The ADSL VoIP Router uses this to provide a unique identifier for each PC. Because of this, the MAC address can NOT be left blank. Add as New Entry Add a new PC to the list, using the data in the "Properties" box. If "Automatic discovery" (for MAC address) is selected, the PC will be sent a "ping" to determine its hardware address. This will fail unless the PC is connected to the LAN, and powered on. Update (modify) the selected PC, using the data in the "Properties" box. Update Selected PC Clear Form Clear the "Properties" box, ready for entering data for a new PC. Refresh Update the data on screen. Generate Report Display a read-only list showing full details of all entries in the PC database. Standard Screen Click this to view the standard PC Database screen. 74 Advanced Features Config File This feature allows you to download the current settings from the ADSL VoIP Router, and save them to a file on your PC. You can restore a previously-downloaded configuration file to the ADSL VoIP Router, by uploading it to the ADSL VoIP Router. This screen also allows you to set the ADSL VoIP Router back to its factory default configura-

tion. Any existing settings will be deleted. An example Config File screen is shown below. Figure 60: Config File Screen Data - Config File Screen Backup Config Use this to download a copy of the current configuration, and store the file on your PC. Click Download to start the download. Restore Config This allows you to restore a previously-saved configuration file back to the ADSL VoIP Router. Click Browse to select the configuration file, then click Restore to upload the configuration file. WARNING !

Uploading a configuration file will destroy (overwrite) ALL of the existing settings. Default Config Clicking the Factory Defaults button will reset the ADSL VoIP Router to its factory default settings. WARNING !

This will delete ALL of the existing settings. 75 ADSL VoIP Router User Guide Logging The Logs record various types of activity on the ADSL VoIP Router. This data is useful for troubleshooting, but enabling all logs will generate a large amount of data and adversely affect performance. Since only a limited amount of log data can be stored in the ADSL VoIP Router, log data can also be E-mailed to your PC. Use the E-mail screen to configure this feature. Figure 61: Logging Screen Data - Logging Screen Logs Current Time The current time on the ADSL VoIP Router is displayed. Log Data Buttons Current log data is displayed in this panel. There are three (3) buttons Refresh - Update the log data. Clear Log - Clear the log, and restart it. This makes new messages easier to read. Send Log - E-mail the log immediately. This is only functional if the E-mail screen has been configured. 76 Advanced Features Logs Include (Checkboxes) Syslog Disable Broadcast on LAN Syslog Use these checkboxes to determine which events are included in the log. Checking all options will increase the size of the log, so it is good practice to disable any events which are not really re-

quired. Attempted access to blocked sites - If checked, attempted Internet accesses which were blocked are logged. Connections to the Web-based interface of this Router - If checked, this will log connections TO this Router, rather than through this Router to the Internet. Router operation - If checked, other Router operations (not covered by the selections above) will be logged. Known DoS attacks and Port Scans - If checked, Denial of Service attacks, as well as port scans, will be logged. Data is not sent to a Syslog Server. The Syslog data is broadcast, rather than sent to a specific Syslog server. Use this if your Syslog Server does not have a fixed IP address. If your Syslog server has a fixed IP address, select this option, and enter the IP address of your Syslog server. 77 ADSL VoIP Router User Guide E-mail This screen allows you to E-mail Logs and Alerts. A sample screen is shown below. Figure 62: E-mail Screen Data - E-mail Screen E-Mail Notification Turn E-mail Notifi-

cation on Check this box to enable this feature. If enabled, the E-mail address information (below) must be provided. Send to this E-mail address Enter the E-mail address the Log is to be sent to. The E-mail will also show this address as the Sender's address. Outgoing (SMTP) Mail Server Enter the address or IP address of the SMTP (Simple Mail Transport Protocol) Server you use for outgoing E-mail. My SMTP Mail Server requires authentication To stop spanners, many SMTP mail servers require you to log in to send mail. In this case, enable this checkbox, and enter the login information (User name and Password) in the fields below. User Name Password If you have enabled "My SMTP Mail Server requires authentication"

above, enter the User Name required to login to your SMTP Server. If you have enabled "My SMTP Mail Server requires authentication"

above, enter the password required to login to your SMTP Server. 78 Advanced Features E-mail Alerts Send E-mail alerts immediately E-mail Logs Send Logs You can choose to have alerts E-mailed to you, by checking the desired checkboxes. The Broadband ADSL Router can send an immediate alert when it detects a significant security incident such as A known hacker attack is directed at your IP address A computer on the Internet scans your IP address for open ports Someone on your LAN (Local Area Network) tries to visit a blocked site. Select the desired option for sending the log by E-mail. Never (default) - This feature is disabled; Logs are not sent. When log is full - The time is not fixed. The log will be sent when the log is full, which will depend on the volume of traffic. Hourly, Daily, Weekly... - The log is sent on the interval speci-

fied. If "Daily" is selected, the log is sent at the time specified. If the day is specified, the log is sent once per week, on the specified day. Select the time of day you wish the E-mail to be sent. If the log is full before the time specified to send it, it will be sent regardless. 79 ADSL VoIP Router User Guide Diagnostics This screen allows you to perform a "Ping" or a "DNS lookup". These activities can be useful in solving network problems. An example Network Diagnostics screen is shown below. Figure 63: Network Diagnostics Screen Data - Network Diagnostics Screen Ping Ping this IP Address Ping Button DNS Lookup Internet name Enter the IP address you wish to ping. The IP address can be on your LAN, or on the Internet. Note that if the address is on the Internet, and no connection currently exists, you could get a "Timeout" error. In that case, wait a few seconds and try again. After entering the IP address, click this button to start the "Ping"

procedure. The results will be displayed in the Ping Results pane. Enter the Domain name or URL for which you want a DNS (Domain Name Server) lookup. Note that if the address in on the Internet, and no connection currently exists, you could get a "Timeout" error. In that case, wait a few seconds and try again. Lookup Button After entering the Domain name/URL, click this button to start the

"DNS Lookup" procedure. Routing Display Click this button to display the internal routing table. This information can be used by Technical Support and other staff who understand Routing Tables. 80 Advanced Features Remote Admin If enabled, this feature allows you to manage the ADSL VoIP Router via the Internet. Figure 64: Remote Administration Screen Data - Remote Administration Screen Remote Administration Enable Remote Management Check to allow administration/management via the Internet. (To connect, see below). If Disabled, this device will ignore Administration connection at-

tempts from the Internet. This is the current address you will use when accessing this device from the Internet. To connect, see details and an example below. Enter a port number between 1024 and 65535. The default for HTTP

(Web) connections is port 80, but using port 80 will prevent the use of a Web "Virtual Server" on your LAN. So using a different port num-

ber is recommended. The default value is 8080. The port number must be specified in your Browser when you con-

nect, as detailed above. Select the desired option. Everyone - allow access by everyone on the Internet. Only This Computer - allow access by only one IP address. Enter the desired IP address. IP Address Range - allow access from a range of IP addresses on the Internet. Enter a beginning and ending IP address to define the allowed range. For security, you should restrict access to as few external IP ad-

dresses as practical. Current IP Address Port Number Access Permission Allow Remote Access 81 ADSL VoIP Router User Guide To connect from a remote PC via the Internet 1. Ensure your Internet connection is established, and start your Web Browser. 2. In the "Address" bar, enter "HTTP://" followed by the Internet IP Address of the ADSL VoIP Router. If the port number is not 80, the port number is also required. (After the IP Address, enter ":" followed by the port number.) e.g. HTTP://123.123.123.123:8080 This example assumes the WAN IP Address is 123.123.123.123, and the port number is 8080. 3. You will then be prompted for the login name and password for this device. 82 Advanced Features Routing Overview If you don't have other Routers or Gateways on your LAN, you can ignore the "Routing"

page completely. If the ADSL VoIP Router is only acting as a Gateway for the local LAN segment, ignore the

"Routing" page even if your LAN has other Routers. If your LAN has a standard Router (e.g. Cisco) on your LAN, and the ADSL VoIP Router is to act as a Gateway for all LAN segments, enable RIP (Routing Information Protocol) and ignore the Static Routing table. If your LAN has other Gateways and Routers, and you wish to control which LAN seg-

ments use each Gateway, do NOT enable RIP (Routing Information Protocol). Configure the Static Routing table instead. (You also need to configure the other Routers.) If using Windows 2000 Data center Server as a software Router, enable RIP on the ADSL VoIP Router, and ensure the following Windows 2000 settings are correct:

Open Routing and Remote Access In the console tree, select Routing and Remote Access , [server name], IP Routing, RIP In the "Details" pane, right-click the interface you want to configure for RIP version 2, and then click "Properties". On the "General" tab, set Outgoing packet protocol to "RIP version 2 broadcast", and Incoming packet protocol to "RIP version 1 and 2". Routing Screen The routing table is accessed by the Routing link on the Administration menu. Using this Screen Generally, you will use either RIP (Routing Information Protocol) OR the Static Routing Table, as explained above, although is it possible to use both methods simultaneously. Static Routing Table If RIP is not used, an entry in the routing table is required for each LAN segment on your Network, other than the segment to which this device is attached. The other Routers must also be configured. See Configuring Other Routers on your LAN later in this chapter for further details and an example. 83 ADSL VoIP Router User Guide Figure 65: Routing Screen Data - Routing Screen RIP RIP Direction Select the desired RIP Direction. RIP Version Choose the RIP Version for the Server. Static Routing Static Routing Table Entries Buttons Add Edit Delete Save This list shows all entries in the Routing Table. This area shows details of the selected item in the list. Change any the properties as required, then click the "Edit"

button to save the changes to the selected entry. Add a new entry to the Static Routing table, using the data shown in the "Properties" area on screen. The entry selected in the list is ignored, and has no effect. Update the current Static Routing Table entry, using the data shown in the table area on screen. Delete the current Static Routing Table entry. Save the RIP setting. This has no effect on the Static Routing Table. Configuring Other Routers on your LAN It is essential that all IP packets for devices not on the local LAN be passed to the ADSL VoIP Router, so that they can be forwarded to the external LAN, WAN, or Internet. To achieve this, the local LAN must be configured to use the ADSL VoIP Router as the Default Route or Default Gateway. 84 Advanced Features Local Router The local router is the Router installed on the same LAN segment as the ADSL VoIP Router. This router requires that the Default Route is the ADSL VoIP Router itself. Typically, routers have a special entry for the Default Route. It should be configured as follows. Destination IP Address Normally 0.0.0.0, but check your router documentation. Network Mask Normally 0.0.0.0, but check your router documentation. Gateway IP Address The IP Address of the ADSL VoIP Router. Metric 1 Other Routers on the Local LAN Other routers on the local LAN must use the ADSL VoIP Router's Local Router as the Default Route. The entries will be the same as the ADSL VoIP Router's local router, with the exception of the Gateway IP Address. For a router with a direct connection to the ADSL VoIP Router's local Router, the Gateway IP Address is the address of the ADSL VoIP Router's local router. For routers which must forward packets to another router before reaching the ADSL VoIP Router's local router, the Gateway IP Address is the address of the intermediate router. Static Routing - Example Figure 66: Routing Example For the ADSL VoIP Router's Routing Table For the LAN shown above, with 2 routers and 3 LAN segments, the ADSL VoIP Router requires 2 entries as follows. Entry 1 (Segment 1) Destination IP Address 192.168.1.0 Network Mask 255.255.255.0 (Standard Class C) Gateway IP Address 192.168.0.100 (ADSL VoIP Router's local Router) 85 ADSL VoIP Router User Guide Metric Entry 2 (Segment 2) Destination IP Address 2 192.168.2.0 Network Mask 255.255.255.0 (Standard Class C) Gateway IP Address 192.168.0.100 Metric 3 For Router A's Default Route Destination IP Address Network Mask 0.0.0.0 0.0.0.0 Gateway IP Address 192.168.0.1 (ADSL VoIP Router's IP Address) For Router B's Default Route Destination IP Address Network Mask 0.0.0.0 0.0.0.0 Gateway IP Address 192.168.1.80 (ADSL VoIP Router's local router) 86 Advanced Features Upgrade Firmware The firmware (software) in the ADSL VoIP Router can be upgraded using your Web Browser. You must first download the upgrade file, then select Upgrade Firmware on the Administration menu. You will see a screen like the following. Figure 67: Router Upgrade Screen To perform the Firmware Upgrade:

1. Click the Browse button and navigate to the location of the upgrade file. 2. Select the upgrade file. Its name will appear in the Upgrade File field. 3. Click the Start Upgrade button to commence the firmware upgrade. The ADSL VoIP Router is unavailable during the upgrade process, and must restart when the upgrade is completed. Any connections to or through the ADSL VoIP Router will be lost. 87 Chapter 8 Modem Mode 8 This Chapter explains configuration and operation when in "Modem" or

"Bridge" mode.. Overview There are two modes available on the Mode screen. Router - Both the ADSL Modem and the Router features are operational. In this mode, this device can provide shared Internet Access to all your LAN users. Also, by default, it acts a DHCP Server, providing an IP address and related information to all Wireless and LAN us-

ers. Modem - Only the ADSL Modem component is operational. All Router features are dis-

abled. This device is "transparent" - it does not perform any operations or make any changes to the network traffic passing through it. You need to have a DHCP Server on your LAN to provide IP addresses to the Wireless clients using this Access Point. This Chapter describes operation while in Modem mode. Management Connections When this device restarts in Modem mode, the IP address does not change, but the DHCP server is disabled. However, your PC will usually retain the IP address provided by the DHCP Server, so the connection will be automatically re-established. You then need to ensure that the IP address of this modem is suitable for your LAN. You need to have a DHCP Server on your LAN to provide IP addresses to the Wireless clients using this Access Point. This Modem/AP must be a valid device on your LAN, to allow management connections. You must assign a (fixed) IP address which is within the address range used on your LAN, but not within the address range used by your DHCP server. When you connect in future, just connect normally, using the IP address you assigned. 1. Start your WEB browser. 2. In the Address box, enter "HTTP://" and the current IP Address of the ADSL VoIP Modem, as in this example, which uses the ADSL VoIP Modem's default IP Address:

HTTP://192.168.0.1 3. When prompted for the User name and Password, enter admin for the user name, and the current password, as set on the password screen. (The password is the same regardless of the mode.) 88 Advanced Administration Home Screen If in Modem mode, the home screen will look like the example below. Figure 68: Home Screen - Modem Mode Note that the menu has changed, many of the options in Router mode are not available. The screens available are:

Mode - change back to Router mode, if desired. ADSL - set ADSL parameters. See the following section for details. LAN - set IP address, mask and gateway. This is the same as in Router mode, except that the DHCP server is not available while in Modem mode. Wireless - this screen, and related sub-screens, is the same as in Router mode. Password - this screen is the same as in Router mode. Upgrade Firmware - this screen is the same as in Router mode. Status - displays current settings and status. See the following section for details. 89 ADSL VoIP Router User Guide ADSL Screen This screen is used to set the ADSL parameter used by the modem. Figure 69: ADSL Screen Check with your ISP or DSL service provider to find whether your Multiplexing Method is VC-BASED or LLC-BASED. Enter the value proposed by your ISP or DSL service provider. Enter the value proposed by your ISP or DSL service provider. Data - ADSL Screen Multiplexing Method VPI VCI Operation Operation is automatic and transparent. Wireless clients can connect to the Access Point if they have the correct SSID and security, but they must obtain an IP address from the DHCP Server on your LAN. The modem will act like any other ADSL modem. No routing will be performed, and no client login will be done. If a client login is required, it must be performed by your Router/Gateway or by software on your PC. 90 Advanced Administration Status Screen In Modem mode, the Status screen looks like the example below. Figure 70: Status Screen - Modem Mode Data - Status Screen (Modem Mode) System Device Name The current name of the ADSL VoIP Router. This is also the

"hostname" provided to ISPs who request this information. Firmware Version The version of the current firmware installed. Modem Modem Status This indicates the status of the ADSL modem comp onent. DownStream Connection Speed If connected, displays the speed for the Down Stream (download) ADSL Connection. UpStream Connection Speed If connected, displays the speed for the Up Stream (upload) ADSL Connection. VPI VCI LAN This displays the current VPI setting used for the ADSL connec-

tion. This displays the current VCI setting used for the ADSL connec-

tion. IP Address The IP Address of the ADSL VoIP Router. 91 ADSL VoIP Router User Guide Network Mask MAC Address Wireless Name (SSID) Region Channel Wireless AP Broadcast Name Buttons Connection Details Attached Devices The Network Mask (Subnet Mask) for the IP Address above. This shows the MAC Address for the ADSL VoIP Router, as seen on the LAN interface. If using an ESS (Extended Service Set, with multiple access points) this ID is called an ESSID (Extended Service Set Identifier). The region can not be changed by users. This shows the Channel currently used, as set on the Wireless screen. This indicates whether or not the Wireless Access Point feature is enabled. This indicates whether or not the SSID is Broadcast. This setting is on the Wireless screen. Click this button to open a sub-window and view a detailed description of the current connection. This will open a sub-window, showing all Wireless devices currently using the Access Point. Refresh Screen Update the data displayed on screen. 92 Appendix A Troubleshooting A This Appendix covers the most likely problems and their solutions. Overview This chapter covers some common problems that may be encountered while using the ADSL VoIP Router and some possible solutions to them. If you follow the suggested steps and the ADSL VoIP Router still does not function properly, contact your dealer for further advice. General Problems Problem 1:

Can't connect to the ADSL VoIP Router to configure it. Solution 1:

Check the following:

The ADSL VoIP Router is properly installed, LAN connections are OK, and it is powered ON. Ensure that your PC and the ADSL VoIP Router are on the same network segment. (If you don't have a router, this must be the case.) If your PC is set to "Obtain an IP Address automatically" (DHCP client), restart it. If your PC uses a Fixed (Static) IP address, ensure that it is using an IP Address within the range 192.168.0.2 to 192.168.0.254 and thus compati-

ble with the ADSL VoIP Router's default IP Address of 192.168.0.1. Also, the Network Mask should be set to 255.255.255.0 to match the ADSL VoIP Router. In Windows, you can check these settings by using Control Panel-

Network to check the Properties for the TCP/IP protocol. Internet Access Problem 1: When I enter a URL or IP address I get a time out error. Solution 1:

A number of things could be causing this. Try the following troubleshooting steps. Check if other PCs work. If they do, ensure that your PCs IP settings are correct. If using a Fixed (Static) IP Address, check the Network Mask, Default gateway and DNS as well as the IP Address. If the PCs are configured correctly, but still not working, check the ADSL VoIP Router. Ensure that it is connected and ON. Connect to it and check its settings. (If you can't connect to it, check the LAN and power connections.) Check the ADSL VoIP Router's status screen to see if it is working correctly. Problem 2:

Some applications do not run properly when using the ADSL VoIP Router. 93 ADSL VoIP Router User Guide Solution 2:

The ADSL VoIP Router processes the data passing through it, so it is not transparent. For incoming connections, you must use the Virtual Server or Firewall Rules to specify the PC which will receive the incoming traffic. You can also use the DMZ function. This should work with almost every application, but:

Only one (1) PC can use this feature. It is a security risk, since the firewall is disabled. Wireless Access Problem 1: My PC can't locate the Wireless Access Point. Solution 1:

Check the following. Your PC is set to Infrastructure Mode. (Access Points are always in Infrastructure Mode) The SSID on your PC and the Wireless Access Point are the same. Remember that the SSID is case-sensitive. So, for example "Workgroup"

does NOT match "workgroup". Both your PC and the ADSL VoIP Router must have the same setting for WEP. The default setting for the ADSL VoIP Router is disabled, so your wireless station should also have WEP disabled. If WEP is enabled on the ADSL VoIP Router, your PC must have WEP enabled, and the key must match. If the ADSL VoIP Router's Wireless screen is set to Allow Trusted PCs only, then each of your Wireless stations must have been designated as

"Trusted", or the Wireless station will be blocked. To see if radio interference is causing a problem, see if connection is possible when close to the ADSL VoIP Router. Remember that the connection range can be as little as 100 feet in poor environments. Problem 2: Wireless connection speed is very slow. Solution 2:

The wireless system will connect at the highest possible speed, depending on the distance and the environment. To obtain the highest possible connec-

tion speed, you can experiment with the following:

ADSL VoIP Router location. Try adjusting the location and orientation of the ADSL VoIP Router. Wireless Channel If interference is the problem, changing to another channel may show a marked improvement. Radio Interference Other devices may be causing interference. You can experiment by switching other devices Off, and see if this helps. Any "noisy" devices should be shielded or relocated. RF Shielding Your environment may tend to block transmission between the wireless stations. This will mean high access speed is only possible when close to the ADSL VoIP Router. 94 Appendix B About Wireless LANs B This Appendix provides some background information about using Wireless LANs (WLANs). Modes Wireless LANs can work in either of two (2) modes:

Ad-hoc Infrastructure Ad-hoc Mode Ad-hoc mode does not require an Access Point or a wired (Ethernet) LAN. Wireless Sta-

tions (e.g. notebook PCs with wireless cards) communicate directly with each other. Infrastructure Mode In Infrastructure Mode, one or more Access Points are used to connect Wireless Stations

(e.g. Notebook PCs with wireless cards) to a wired (Ethernet) LAN. The Wireless Stations can then access all LAN resources. Access Points can only function in "Infrastructure" mode, and can communicate only with Wireless Stations which are set to "Infrastructure" mode. BSS/ESS BSS A group of Wireless Stations and a single Access Point, all using the same ID (SSID), form a Basic Service Set (BSS). Using the same SSID is essential. Devices with different SSIDs are unable to communicate with each other. ESS A group of Wireless Stations, and multiple Access Points, all using the same ID (ESSID), form an Extended Service Set (ESS). Different Access Points within an ESS can use different Channels. In fact, to reduce interference, it is recommended that adjacent Access Points SHOULD use different channels. As Wireless Stations are physically moved through the area covered by an ESS, they will automatically change to the Access Point which has the least interference or best performance. This capability is called Roaming. (Access Points do not have or require Roaming capabilities.) 95 ADSL VoIP Router User Guide Channels The Wireless Channel sets the radio frequency used for communication. Access Points use a fixed Channel. You can select the Channel used. This allows you to choose a Channel which provides the least interference and best performance. In the USA and Canada, 11 channel are available. In "Infrastructure" mode, Wireless Stations normally scan all Channels, looking for an Access Point. If more than one Access Point can be used, the one with the strongest signal is used. (This can only happen within an ESS.) If using "Ad-hoc" mode (no Access Point), all Wireless stations should be set to use the same Channel. However, most Wireless stations will still scan all Channels to see if there is an exis ting "Ad-hoc" group they can join. WEP WEP (Wired Equivalent Privacy) is a standard for encrypting data before it is transmitted. This is desirable because it is impossible to prevent snoopers from receiving any data which is transmitted by your Wireless Stations. But if the data is encrypted, then it is meaningless unless the receiver can decrypt it. If WEP is used, the Wireless Stations and the Access Point must have the same settings for each of the following:

WEP Key Off, 64 Bit, 128 Bit For 64 Bit encryption, the Key value must match. For 128 Bit encryption, the Key value must match WEP Authentication Open System or Shared Key. WPA-PSK WPA-PSK is another standard for encrypting data before it is transmitted. This is a later stan-

dard than WEP (Wired Equivalent Privacy), and provides greater security for your data. Data is encrypted using a 256Bit key which is automatically generated and changed often. If all your Wireless stations support WPA-PSK, you should use this instead of WEP. If WPA-PSK is used, the Wireless Stations and the Access Point must have the same settings for each of the following:

WPA PSK

(Pre-shared Key) Encryption Enter the same value on every station and the AP. The PSK must be from 8 to 63 characters in length. The 256Bit key used for the actual encryption is derived from this key. The same encryption method must be used. The most common encryption method is TKIP. Another widely-

supported method is AES. 96 Appendix A - Troubleshooting Wireless LAN Configuration To allow Wireless Stations to use the Access Point, the Wireless Stations and the Access Point must use the same settings, as follows:

Mode SSID (ESSID) On client Wireless Stations, the mode must be set to "Infrastructure".

(The Access Point is always in "Infrastructure" mode.) Wireless Stations should use the same SSID (ESSID) as the Access Point they wish to connect to. Alternatively, the SSID can be set to

"any" or null (blank) to allow connection to any Access Point. Wireless Security The Wireless Stations and the Access Point must use the same settings for Wireless security. (None, WEP, WPA-PSK). WEP: If WEP is used, the Key size (64Bit, 128Bit), Key value, and Authentication settings must be the same on the Wireless Stations and the Access Point. WPA-PSK: If WPA-PSK is used, all Wireless Stations must be set to use WPA-PSK, and have the same Pre-shared Key and encryption system. For Ad-hoc networks (no Access Point), all Wireless stations must use the same security settings. 97 C Appendix C Specifications Multi-Function ADSL VoIP Router Model ADSL VoIP Router ADSL Interface T1.413, G.DMT, G.lite, multi-mode Dimensions Operating Temperature Storage Temperature 189mm(W) * 122mm(D) * 33mm(H) 0 C to 40 C

-10 C to 70 C Network Protocol:

Network Interface:

TCP/IP 4 * 10/100BaseT (RJ45) LAN connection 1 * RJ11 for ADSL line LEDs 12 Power Adapter 15 V DC External Wireless Interface Standards Frequency Channels Modulation Data Rate WEP IEEE802.11b, IEEE802.11g WLAN, 2.412 to 2.462GHz (Industrial Scientific Medical Band ) Maximum 14 Channels, depending on regulatory authorities CCK, DQPSK, DBPSK, OFDM/CCK Up to 54 Mbps 64Bit, 128Bit Output Power 13dBm (typical) Receiver Sensitivity

-80dBm Min. 98 Appendix B - Specifications Regulatory Approvals FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec-

tion against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica-

tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is Increase the separation between the equipment and receiver. connected. Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

(Example - use only shielded interface cables when connecting to computer or peripheral de-

vices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. 99 ADSL VoIP Router User Guide Channel The Wireless Channel sets the radio frequency used for communication. E Access Points use a fixed Channel. You can select the Channel used. This allows you to choose a Channel which provides the least interference and best performance. In the USA and Canada, 11 channel are available. If using multiple Access Points, it is better if adjacent Access Points use different Channels to reduce interference. E In "Infrastructure" mode, Wireless Stations normally scan all Channels, looking for an Access Point. If more than one Access Point can be used, the one with the strongest signal is used. (This can only happen within an ESS.) E If using "Ad-hoc" mode (no Access Point), all Wireless stations should be set to use the same Channel. However, most Wireless stations will still scan all Channels to see if there is an existing "Ad-hoc" group they can join. CAUTION:

1) To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. 2) This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. CE Approval CE Standards This product complies with the 99/5/EEC directives, including the following safety and EMC standards:

EN300328 EN301489-1/-17 EN60950 CE Marking Warning This is a Class B product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. 100

External Photos Integral dipole antenna Reverse SMA connector, dipole antenna

SerComm IP815VGA / IP815VGB SerComm IP805VGA / IP805VGB ADSL VoIP Router 1317 FCC ID: P27WIAD1X

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 July 20, 2005 RE:

FCC ID:

SerComm Corporation P27WIAD1X After a review of the submitted information, I have a few comments on the above referenced Application. 1) The block diagram should show the frequencies of all oscillators in the TX portion of the device

(CFR 2.1033(a)(5)), unless this portion of the device is an OEM part from a different manufacturer. Please provide either the block diagram for the TX portion, or alternatively provide a parts list that shows that this part is provided by another manufacturer. Please update the list of confidential exhibits if necessary. 2) The schematics do not include the TX. Note that a schematic for the TX portion of the device is required as specified 2.1033(b)(5) for the RF section. Please provide either a schematic for the TX card or as an alternative, you may provide a parts list that lists that shows that this part is provided by another manufacturer. Please provide either a schematic or parts list as specified. If necessary, please update the confidentiality letter to include the parts list. 3) The users manual shows you can select the region of the world and provides information in regards to this (page 21, 22, 100, 104). This is not allowed for devices shipped to the U.S as the end user is not allowed to have this freedom. Additionally the selectable channels may only be for channels approved for use in the U.S. Please explain how the device is compliant and adjust the manual as necessary. 4) Section 15.15(b) prohibits adjustments of any control by the user that will cause operation of a device in violation of the regulations. Accordingly, any proposal to allow the end user to choose extended channels on frequencies outside of an allowable frequency band in the USA is not acceptable. For example, a WLAN device operating according to Section 15.247 on channels 1-11 between 2.4 - 2.483.5 GHz must not have any user controls or software to allow the device to operate on channels 12 and 13 which are outside of the allowed USA band. For instance, the user should not be able to select alternative countries which would allow different channel plans outside of the allowed USA band. Please explain how this device is compliant to this requirement. 5) Many of the radiated results show a difference between Peak and Average values above 1 GHz of close to 20 dB. Typically the difference between peak and average on this type of transmitter is only 10-12 dB, regardless of 802.11b or 802.11g. The larger delta for the 802.11 b tends to suggest that maybe the fundamental was not configured properly for continuous transmission during this test and possibly a larger VBW should be used. Note that for the average measurements to be considered valid the VBW must be > 1/Ton time. Another possibility may be that the peak readings are taken with too large of a span to adequately capture the true frequency such that when the spans are zoomed in for average measurements the frequency of interest is totally missed. Please explain, verify, or remeasure as necessary. Timothy R. Johnson Examining Engineer mailto: tjohnson@AmericanTCB.com The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination.

Page 2 July 21, 2005 Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.

.1.1 SerComm Corp. Embedded Server Provider 8F, No.3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. TEL: 886-2-2655-3988 http://www.sercomm.com All trademarks are the property of their respective owners Specifications are subject to change without notice FAX: 886-2-2655-3966 E-mail: sales@sercomm.com SerComm Corp. 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C July 17, 2005 Federal Communications Commission Authorization and Evaluation Division FCC IDG P27WIAD1X Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant Hereby requests confidential treatment of information accompaniment this Application As outlined below:

1. Block Diagram, 2. Schematic Diagram, The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application Sincerely, Applicant: SerComm Address: 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C TEL: +886-2-2655-3988 FAX: +886-2-2655-3765

IP815VGA/VGB Operation Description This project is used the TI TNETD7300A as the microcontroller. To support bridging and routing functionality, a 256-MHz MIPS32 CPU with MMU and 16-KB I-cache/8-KB D-cache is integrated into the device. For peripheral support, the TNETD7300A integrates a SDRAM interface capable of accessing from 2MB up to 256MB of external SDRAM, a 10/100 Ethernet MAC and PHY with Auto-MDIX, a second Ethernet MAC with available MII interface, USB 2.0 Device interfaces, Two VLYNQ interface are provide, a EJTAG interface for software debug use, Utopia Master port and up to 27 GPIOs. The TNETD7300A is an asymmetric digital subscriber line (ADSL) bridge/router solution integrating a broadband communications processor and peripherals, ADSL physical layer device (PHY), ADSL line driver/receiver, USB PHY, Ethernet PHY, and power management (PM) for use in customer premises equipment (CPE) remote terminal (RT) modems for residential and small-office applications. The TNETD7300A can be used in modems ranging from simple Ethernet bridges to integrated access devices (IADs) and residential gateways (RGs). The TNETD7300A includes features to enhance ADSL throughput when connected to a compatible central office (CO) ADSL modem. ADSL2+ provides downstream transmission rates capable of 24 Mbps.(1) Reach extended ADSL (READSL2) and all digital loop ADSL allow 384-/128-kbps service to be provided on loops as long as 21 kft. These features allow the TNETD7300A to greatly surpass the downstream throughput limit of 8 Mbps and the 17.5-kft reach limit seen in previous ADSL modems, thus, granting ADSL service providers access to a larger subscriber pool, without requiring replacement of the local loop infrastructure. The TNETD7300A includes a new VLYNQ. peripheral bus extension that allows VLYNQ-enabled devices to be gutlessly interfaced to TNETD7300A for advanced applications, such as voice over packet (VOP) telephony or ADSL-to-wireless LAN

(WLAN) (IEEE Std 802.11) bridging and interfaces. The TNETD7300A supports Ethernet auto media dependent interface crossover

(MDIX), whereas the TNETD7300 does not support auto MDIX. This device derives its power from a 12V DC power adapter which needs to be converted to 3.3V, 1.5V and 12V DC. IP805VGA/VGB Operation Description The main function requirement is defined as following-

Hardware Specification 1. CPU 2. DSP 3. Codec+SILC 4. DDA 5. SDRAM 6. WAN Port 7. LAN Port 8. 11g Access Point 9. Power Adapter 10. LEDs 11. Reset button 12. UART Support 13. Operating temp. 14. Storage temp 15. EMC 16. PCB Size 17. PCB Layout TI TENTD7300A (SOC) TI TNETV921 Si3210 Si3050+Si3018 16/32 Mbytes 1 x RJ 11 1 LAN Ports with 10/100 auto-negotiation TI TNETW1130 WLAN module DC 12V/1.2A Refer to Table 1 Reset to factory default by pressing 5 seconds Can Connect to UART interface for S/W Development 0~40

-20~70 ClassB Based on 4 layers Back Panel (left to right):

Power jack: 12V DC, 1.2A

LAN port : RJ45

WAN port : ADSL, RJ-11

FXO : RJ-11

Phone : RJ-11

Reset button: Push button

Antenna : 2dBi dipole antenna (detachable or fixed)

.1.1 SerComm Corp. Embedded Server Provider 8F, No.3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. TEL: 886-2-2655-3988 http://www.sercomm.com All trademarks are the property of their respective owners Specifications are subject to change without notice FAX: 886-2-2655-3966 E-mail: sales@sercomm.com SerComm Corp. 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C Federal Communications Commission Dear Sir, We, the undersigned, hereby authorize Exclusive Certification Corp. to act on our behalf in all matters relating to application for ADSL VoIP Router (Model:IP815VGA / IP805VGA , FCC ID:

P27WIAD1X) authorization, including the signing of all documents relating to these matters. Any and all carried out by Exclusive Certification Corp. on our behalf shall have the same effect as acts of our own. The applicant certifies that in the case of an individual applicant (e.g., corporation), no party to the applicant is subject to a denial of federal benefits, that includes FCC benefits, pursuant to section 5301 of the Anti-drug abuse Act of 1988.21 U.S.A. 862. For a definition of a party for these purposes See 47 C.F.R. 1.2002(b).

(Signature)

(Printed) By: Kevin Tseng Applicant: SerComm Corp. Address: 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C Tel: +886-2-2655-3988 Fax: +886-2-2655-3765 E-mail: kevin_cw_tseng@sercomm.com Date: August 17, 2004

1.1. Test Result of RF Exposure Evaluation

. Product: ADSL VoIP Router

. Test Item: RF Exposure Evaluation Data

. Test site: OATSI-SD

. Test Mode: Normal Operation 1.1.1. Antenna Gain The maximum Gain is 2.0 dBi. 1.1.2. EUT Operation condition Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 1.1.3. Output Power into Antenna & RF Exposure Evaluation Distance Modulation Standard: IEEE 802.11b Test Date: Jun. 28, 2005 Temperature: 27 J Humidity: 64H Channel Channel Frequency Output Power to Antenna Power Density (S) 01 06 11

(MHz) 2412 2437 2462

(dBm) 13.47 12.94 12.98

(mW/cm2) 0.0070 0.0070 0.0060 Modulation Standard: IEEE 802.11g Test Date: Jun. 28, 2005 Temperature: 27 J Humidity: 64H Channel Channel Frequency Output Power to Antenna Power Density (S) 01 06 11

(MHz) 2412 2437 2462

(dBm) 12.69 12.90 13.16

(mW/cm2) 0.0060 0.0060 0.0070 The MPE is calculated as 0.0070 mW / cm2 < limit 1 mW / cm2. So, RF exposure limit warning or SAR test are not required.

FCC Test Report: FI05012702-A FCC TEST REPORT according to FCC Rules and Regulations Part 15 Subpart C Applicant Address SerComm Corporation 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. ADSL VoIP Router IP815VGA IP805VGA P27WIAD1X Equipment Model No. Serial No. FCC ID Trade Name SerComm Laboratory Accreditation 1332

The test result refers exclusively to the test presented test model / sample.,

Without written approval of Exclusive Certification Corp. the test report shall not be reproduced except in full.

The EUT is also considered as a kind of computer peripheral, because the connection to computer is necessary for typical use. It has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 1 of 92 Contents FCC Test Report: FI05012702-A 5. 4. 2. 1. Report of Measurements and Examinations ............................................................................. 5 1.1. List of Measurements and Examinations ............................................................................ 5 Test Configuration of Equipment under Test ............................................................................ 6 2.1. Feature of Equipment under Test ....................................................................................... 6 2.2. RF Module Specifications .................................................................................................. 6 2.3. Test Mode and Test Software............................................................................................. 7 2.4. Description of Test System ................................................................................................ 7 2.5. Connection Diagram of Test System .................................................................................. 8 2.6. General Information of Test ............................................................................................... 9 2.7. History of this test report ................................................................................................... 9 3. Antenna Requirements ........................................................................................................... 10 3.1. Standard Applicable ........................................................................................................ 10 3.2. Antenna Construction and Directional Gain ...................................................................... 10 Test of Conducted Emission ....................................................................................................11 4.1. Test Limit ........................................................................................................................11 4.2. Test Procedures ..............................................................................................................11 4.3. Typical Test Setup .......................................................................................................... 12 4.4. Measurement equipment ................................................................................................. 12 4.5. Test Result and Data....................................................................................................... 13 Test of Radiated Emission ...................................................................................................... 26 5.1. Test Limit ....................................................................................................................... 26 5.2. Test Procedures ............................................................................................................. 26 5.3. Typical Test Setup........................................................................................................... 26 5.4. Measurement equipment ................................................................................................. 26 5.5. Test Result and Data....................................................................................................... 26 6dB Bandwidth Measurement ................................................................................................. 26 6.1. Test Limit........................................................................................................................ 26 6.2. Test Procedures.............................................................................................................. 26 6.3. Test Setup Layout ........................................................................................................... 26 6.4. Measurement equipment ................................................................................................. 26 6.5. Test Result and Data....................................................................................................... 26 7. Maximum Peak Output Power................................................................................................. 26 7.1. Test Limit........................................................................................................................ 26 7.2. Test Procedures.............................................................................................................. 26 7.3. Test Setup Layout ........................................................................................................... 26 7.4. List of Measuring Equipment Used................................................................................... 26 7.5. Test Result and Data....................................................................................................... 26 8. Band Edges Measurement...................................................................................................... 26 8.1. Test Limit........................................................................................................................ 26 8.2. Test ProcedureG ............................................................................................................ 26 8.3. Test Setup Layout ........................................................................................................... 26 8.4. List of Measuring Equipment Used................................................................................... 26 8.5. Test Result and Data....................................................................................................... 26 8.6. Restrict band emission Measurement Data....................................................................... 26 Power Spectral Density Measurement .................................................................................... 26 9.1. Test Limit........................................................................................................................ 26 6. 9. Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 2 of 92 FCC Test Report: FI05012702-A 9.2. Test Procedures.............................................................................................................. 26 9.3. Test Setup LayoutG ........................................................................................................ 26 9.4. List of Measuring Equipment Used................................................................................... 26 9.5. Test Result and Data....................................................................................................... 26 10. Restricted Bands of Operation ............................................................................................... 26 10.1. Labeling Requirement ..................................................................................................... 26 Appendix A. Photographs of EUT .A1 ~ A9 Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 3 of 92 FCC Test Report: FI05012702-A CERTIFICATE OF COMPLIANCE according to FCC Rules and Regulations Part 15 Subpart C Applicant Address Equipment Model No. Serial No. FCC ID SerComm Corporation 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. ADSL VoIP Router IP815VGA IP805VGA P27WIAD1X I HEREBY CERTIFY THAT :

The measurements shown in this test report were made in accordance with the procedures given in ANSI C63.4 The equipment was passed the test performed according to FCC Rules and Regulations Part 15 Subpart C (2003). The test was carried out on Jun. 29, 2005 at Exclusive Certification Corp. Signature Anson Chou / Manager Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 4 of 92 FCC Test Report: FI05012702-A 1. Report of Measurements and Examinations 1.1. List of Measurements and Examinations FCC Rule

. Description of Test 15.203

. Antenna Requirement 15.207

. Conducted Emission 15.209

. Radiated Emission 15.247(a)(2) . 6dB Bandwidth 15.247(b)

. Maximum Peak Output Power 15.247(c)

. 100kHz Bandwidth of Frequency Band Edges 15.247(d)

. Power Spectral Density 1.1307 1.1310 2.1091 2.1093

. RF Exposure Compliance Result Pass Pass Pass Pass Pass Pass Pass Pass Test engineer:

Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 5 of 92 FCC Test Report: FI05012702-A 2. Test Configuration of Equipment under Test 2.1. Feature of Equipment under Test Model ADSL VoIP Router ADSL Interface T1.413, G.DMT, G.lite, multi-mode Dimensions Operating Temperature Storage Temperature 189mm(W) * 122mm(D) * 33mm(H) 0 C to 40 C

-10 C to 70 C Network Protocol:

TCP/IP Network Interface:

4 * 10/100BaseT (RJ45) LAN connection 1 * RJ11 for ADSL line LEDs 12 Power Adapter 15 V DC External 2.2. RF Module Specifications Standards Frequency Channels Modulation Data Rate WEP IEEE802.11b, IEEE802.11g WLAN, 2.4 to 2.4835GHz (Industrial Scientific Medical Band ) Maximum 14 Channels, depending on regulatory authorities CCK, DQPSK, DBPSK, OFDM/CCK Up to 54 Mbps 64Bit, 128Bit Output Power 13dBm (typical) Receiver Sensitivity -80dBm Min. Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 6 of 92 FCC Test Report: FI05012702-A 2.3. Test Mode and Test Software The following test mode and test software was performed for conduction and radiation test:

802.11b (CH LO: 2412MHz) 802.11b (CH MID: 2437MHz) 802.11b (CH HI: 2462MHz)

802.11g (CH LO: 2412MHz) 802.11g (CH MID: 2437MHz) 802.11g (CH HI: 2462MHz)

An executive programs, telnet Application under WIN XP.

The test mode include two kind of adapter:

Adapter mode 1 : AD-151A Adapter mode 2 : ADS6818-1815-w 2.4. Description of Test System Device PC Monitor Keyboard Mouse Modem Manufacturer Model No. IBM SlimAGE IGV 510A IBM IBM ACEXX KB-0225 MO28VO DM-1414 Printer HP Desk Jet400 Phone CO-A

(Remote site) FUNET C-COM RP-110A IPAM-1600S Description Power Cable, Unshielding 1.8 m Power Cable, Adapter Unshielding 1.8 m Data Cable, VGA shielding 1.35 m Data Cable, PS2, shielding 1.85 m Data Cable, USB shielding 1.85 m Power Cable, Adapter Unshielding 1.8 m Data Cable, RS232 shielding 1.35 m Power Cable, Adapter Unshielding 1.8 m Data Cable, PRINT shielding 1.6 m Phone Cable, Unshielding 1.8 m Power Cable, Adapter Unshielding 1.8 m Use Cable:

Cable RJ-45 RJ-11*2 USB Description Unshielding, 1.5m Unshielding, 10m Unshielding, 1m Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 7 of 92 2.5. Connection Diagram of Test System FCC Test Report: FI05012702-A Remote workstation 1 4 Printer 5 Modem 3 EUT PC Monitor 6 7 8 Phone Keyboard Mouse 1. The RJ 11 cable is connected from Remote Workstation to the EUT. 2. The RJ 45 cable is connected from PC to the EUT. 3. The USB cable is connected from PC to the EUT. 4. The I/O cable is connected from PC to the Printer. 5. The I/O cable is connected from PC to the Modem. 6. The I/O cable is connected from PC to the Phone. 7. The I/O cable is connected from PC to the Keyboard. 8. The I/O cable is connected from PC to the Mouse. 9. The I/O cable is connected from PC to the Monitor. Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 8 of 92 FCC Test Report: FI05012702-A 2.6. General Information of Test Test Site:

Exclusive Certification Corp. 4F-2, No. 28, Lane 78, Xing-Ai Rd. Nei-hu, Taipei City 114 Taiwan R.O.C. Test Site Location (OATS1-SD): No.68-1, Shihbachongsi, shihding Township, Taipei County 223, Taiwan, R.O.C. Test Voltage:

AC 120V/ 60Hz Test in Compliance with:

ANSI C63.4-2003 FCC Part 15 Subpart C Frequency Range Investigated: Conducted: from 150kHz to 30 MHz Radiation: from 30 MHz to 24620MHz The test distance of radiated emission from antenna to EUT is 3 M. Test Distance:

2.7. History of this test report ORIGINAL. Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 9 of 92 FCC Test Report: FI05012702-A 3. Antenna Requirements 3.1. Standard Applicable For intentional device, according to FCC 47 CFR Section 15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. And according to FCC 47 CFR Section 15.247 (b), if transmitting antennas of directional gain greater than 6dBi are used, the power shall be reduced by the amount in dB that the directional gain of the antenna exceeds 6dBi. 3.2. Antenna Construction and Directional Gain Antenna type 1: Reverse SMA connector, dipole antenna Antenna Gain: 2 dBi. Antenna type 2: Integral dipole antenna. Antenna Gain: 2 dBi. Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 10 of 92 4. Test of Conducted Emission 4.1. Test Limit FCC Test Report: FI05012702-A Conducted Emissions were measured from 150 kHz to 30 MHz with a bandwidth of 9 KHz on the 115 VAC power and return leads of the EUT according to the methods defined in ANSI C63.4-2003 Section 3.1. The EUT was placed on a nonmetallic stand in a shielded room 0.8 meters above the ground plane as shown in section 2.2. The interface cables and equipment positioning were varied within limits of reasonable applications to determine the position produced maximum conducted emissions. Frequency

(MHz) 0.15 0.5 0.5 5.0 5.0 30.0 Quasi Peak

(dB V) 66-56*

56 60 Average

(dB V) 56-46*

46 50

*Decreases with the logarithm of the frequency. 4.2. Test Procedures a. The EUT was placed 0.4 meter from the conducting wall of the shielding room was kept at least 80 centimeters from any other grounded conducting surface. b. Connect EUT to the power mains through a line impedance stabilization network (LISN). c. All the support units are connecting to the other LISN. d. The LISN provides 50 ohm coupling impedance for the measuring instrument. e. The FCC states that a 50 ohm, 50 micro-henry LISN should be used. f. Both sides of AC line were checked for maximum conducted interference. g. The frequency range from 150 kHz to 30 MHz was searched. h. Set the test-receiver system to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 11 of 92 4.3. Typical Test Setup FCC Test Report: FI05012702-A 10cm EUT 80cm 80cm LISN 40cm 40cm 80cm LISN 4.4. Measurement equipment Instrument/Ancillary Type Receiver LISN LISN SCR3501 NNB-2/16Z NNB-2/16Z Manufacturer Schaffner MESS TEC ROLF HEINE Valid Date. 2005/11/03 2006/03/30 2006/05/01 Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 12 of 92 4.5. Test Result and Data Adaptor mode 1:AD-151A FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 13 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 14 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 15 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 16 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 17 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 18 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 19 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 20 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 21 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 22 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 23 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 24 of 92

Adaptor mode 2 :ADS6818-1815-W FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 25 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 26 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 27 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 28 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 29 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 30 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 31 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 32 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 33 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 34 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 35 of 92 FCC Test Report: FI05012702-A Test engineer:

Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 36 of 92 FCC Test Report: FI05012702-A 4.5.1. Test Photographs Front View Rear View Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 37 of 92

5. Test of Radiated Emission 5.1. Test Limit FCC Test Report: FI05012702-A Radiated emissions from 30 MHz to 25 GHz were measured according to the methods defines in ANSI C63.4-2003. The EUT was placed, 0.8 meter above the ground plane, as shown in section 5.6.3. The interface cables and equipment positions were varied within limits of reasonable applications to determine the positions producing maximum radiated emissions For unintentional device, according to 15.109(a), except for Class A digital devices, the field strength of radiated emissions from unintentional radiators at a distance of 3 meters shall not exceed the following values:

Frequency

(MHz) 30-88 88-216 216-960 Above 960 Distance Meters Radiated

( V / M) Radiated

(dB V/ M ) 3 3 3 3 100 150 200 500 40.0 43.5 46.0 54.0 For unintentional device, according to CISPR PUB.22, for Class B digital devices, the general requirement of field strength of radiated emissions from intentional radiators at a distance of 10 meters shall not exceed the above table. Frequency

(MHz) 30-230 230-1000 Distance Meters Radiated

(dB V/ M ) 10 10 30 37 Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 38 of 92 5.2. Test Procedures FCC Test Report: FI05012702-A 1. The EUT was placed on a rotatable table top 0.8 meter above ground. 2. The EUT was set 3 meters from the interference receiving antenna which was mounted on the top of a variable height antenna tower. 3. The table was rotated 360 degrees to determine the position of the highest radiation. 4. The antenna is a broadband antenna and its height is varied between one meter and four meters above ground to find the maximum value of the field strength both horizontal polarization and vertical polarization of the antenna are set to make the measurement. 5. For each suspected emission the EUT was arranged to its worst case and then tune the antenna tower (from 1 M to 4 M) and turn table (from 0 degree to 360 degrees) to find the maximum reading. 6. Set the test-receiver system to Peak or CISPR quasi-peak Detect Function and specified 7. bandwidth with Maximum Hold Mode. If the emission level of the EUT in peak mode was 3 dB lower than the limit specified, then testing will be stopped and peak values of EUT will be reported, otherwise, the emissions which do not have 3 dB margin will be repeated one by one using the quasi-peak method and reported. 8. For testing above 1GHz, the emission level of the EUT in peak mode was 20dB lower than average limit (that means the emission level in peak mode also complies with the limit in average mode), then testing will be stopped and peak values of EUT will be reported, otherwise, the emissions will be measured in average mode again and reported. Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 39 of 92 FCC Test Report: FI05012702-A 5.3. Typical Test Setup Antenna Equipment under Test

* Test distance Turn Table 0.8M Receiver 5.4. Measurement equipment Ground Plane Instrument/Ancillary Type Manufacturer Valid Date EMI Receiver 8546A Spectrum Analyzer FSP40 Horn Antenna Horn Antenna 3115 3116 HP R&S EMCO EMCO 2006/04/13 2005/12/28 2006/02/21 2006/02/21 Bilog Antenna CBL6112B Schaffner 2006/04/12 Amplifier Amplifier 8447D 8449B Agilent Agilent 2006/02/14 2005/12/27 Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 40 of 92

5.5. Test Result and Data Adaptor mode 1:AD-151A FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 41 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 42 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 43 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 44 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 45 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 46 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 47 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 48 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 49 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 50 of 92

FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 51 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 52 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 53 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 54 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 55 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 56 of 92 Adaptor mode 2 :ADS6818-1815-W FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 57 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 58 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 59 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 60 of 92

FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 61 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 62 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 63 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 64 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 65 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 66 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 67 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 68 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 69 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 70 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 71 of 92 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 72 of 92 5.5.1. Photographs of Radiated Emission Test FCC Test Report: FI05012702-A Front View Rear View Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 73 of 92

FCC Test Report: FI05012702-A 6. 6dB Bandwidth Measurement 6.1. Test Limit The minimum of 6dB Bandwidth Measurement is 0.5 MHz. 6.2. Test Procedures 1. The transmitter output was connected to the spectrum analyzer. 2. Set RBW of spectrum analyzer to 100 KHz and VBW to 100 KHz. 3. The 6 dB bandwidth is defined as the total spectrum the power of which is higher than peak power minus 6 dB. 6.3. Test Setup Layout 6.4. Measurement equipment Instrument/Ancillary Spectrum Analyzer Type FSP40 Manufacturer R&S Serial No. 100047 Valid Date. 2005/12/28 6.5. Test Result and Data

(1) Modulation Standard: IEEE 802.11b (11Mbps) Test Date: Jun. 28, 2005 Temperature: 27 Humidity: 6 J 4% Atmospheric pressure: 1015mmHg Channel 01 06 11 Frequency 6dB Bandwidth

(MHz) 2412 2437 2462

(MHz) 11.6 11.9 11.9

(2) Modulation Standard: IEEE 802.11g (12Mbps) Test Date: Jun. 28, 2005 Temperature: 27 Humidity: 6 J 4% Atmospheric pressure: 1015mmHg Channel 01 06 11 Frequency 6dB Bandwidth

(MHz) 2412 2437 2462

(MHz) 16.4 16.4 16.5 Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 74 of 92 FCC Test Report: FI05012702-A Modulation Standard: IEEE 802.11b (11Mbps) Channel 01 Channel 06 Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 75 of 92 FCC Test Report: FI05012702-A Channel 11 Modulation Standard: IEEE 802.11g (12Mbps) Channel 01 Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 76 of 92 Channel 06 Channel 11 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 77 of 92 FCC Test Report: FI05012702-A 7. Maximum Peak Output Power 7.1. Test Limit The Maximum Peak Output Power Measurement is 30dBm. 7.2. Test Procedures The antenna port] RF output^ of the EUT was connected to the input] RF input^ of a power meter. Power was read directly from the meter and cable loss connection was added to the reading to obtain power at the EUT antenna terminal. The EUT Output Power was set to maximum to produce the worse case test result. 7.3. Test Setup Layout 7.4. List of Measuring Equipment Used Instrument/Ancillary Type Spectrum Analyzer FSP40 Manufacturer R&S Serial No. Valid Date. 100047 2005/12/28 7.5. Test Result and Data

(1) Modulation Standard: IEEE 802.11b (11Mbps) Test Date: Jun. 28, 2005 Temperature: 27 Humidity: 6 J 4% Atmospheric pressure: 1015mmHg Channel 01 06 11 Frequency Peak Power Output Peak Power Output

(MHz) 2412 2437 2462

(dBm) 13.47 12.94 12.98

(mW) 22.23 19.68 19.86

(2) Modulation Standard: IEEE 802.11g (12Mbps) Test Date: Jun. 28, 2005 Temperature: 27 Humidity: 6 J 4% Atmospheric pressure: 1015mmHg Channel 01 06 11 Frequency Peak Power Output Peak Power Output

(MHz) 2412 2437 2462

(dBm) 12.69 12.90 13.16

(mW) 18.58 19.50 20.70 Note: Conducted Power = Reading Value + Cable Loss Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 78 of 92 FCC Test Report: FI05012702-A Modulation Standard: IEEE 802.11b (11Mbps) Channel 01 Channel 06 Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 79 of 92 FCC Test Report: FI05012702-A Channel 11 Modulation Standard: IEEE 802.11g (12Mbps) Channel 01 Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 80 of 92 Channel 06 Channel 11 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 81 of 92 FCC Test Report: FI05012702-A 8. Band Edges Measurement 8.1. Test Limit Below 20dB of the highest emission level of operating band

(in 100kHz Resolution Bandwidth). 8.2. Test ProcedureG 1.The transmitter output was connected to the spectrum analyzer via a low lose cable. 2.Set both RBW and VBW of spectrum analyzer to 100 KHz with convenient frequency span including 100 KHz bandwidth from band edge. 3.The band edges was measured and recorded. 8.3. Test Setup Layout 8.4. List of Measuring Equipment Used Instrument/Ancillary Spectrum Analyzer Type FSP40 Manufacturer Serial No. R&S 100047 Valid Date. 2005/12/28 8.5. Test Result and Data

(1) Modulation Standard: IEEE 802.11b (11Mbps) Test Date: Jun. 28, 2005 Temperature: 27 Humidity: 6 J 4% Atmospheric pressure: 1015mmHg Channel Frequency 01 11 2412 2462 maximum value in frequency maximum value is

(MHz) 2399.00 2590.00

(dBm)

-52.16

-57.07

(2) Modulation Standard: IEEE 802.11g (12Mbps) Test Date: Jun. 28, 2005 Temperature: 27 Humidity: 6 J 4% Atmospheric pressure: 1015mmHg Channel Frequency 01 11 2412 2462 maximum value in frequency maximum value is

(MHz) 2399.80 2590.00

(dBm)

-42.04

-61.09 Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 82 of 92 Modulation Standard: IEEE 802.11b (11Mbps) Channel 01 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 83 of 92 FCC Test Report: FI05012702-A Channel 11 Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 84 of 92 FCC Test Report: FI05012702-A Modulation Standard: IEEE 802.11g (12Mbps) Channel 01 Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 85 of 92 FCC Test Report: FI05012702-A Channel 11 Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 86 of 92 FCC Test Report: FI05012702-A 8.6. Restrict band emission Measurement Data Modulation Standard: IEEE 802.11b (11Mbps) Test Date: Jun. 29, 2005 Temperature: 26 Humidity: 6 a) Channel 1 J 8% Atmospheric pressure: 1020mmHg Frequency

(MHz) Ant-Pol H/V Meter Reading Corrected Factor Result

(dBuV/m) Remark 2385.378 2389.968 2389.458 2389.968 b) Channel 11 H H V V 47.53 31.93 50.90 35.39 1.23 1.25 0.55 0.55 48.77 33.18 51.45 35.93 Peak Ave. Peak Ave. Frequency

(MHz) Ant-Pol H/V Meter Reading Corrected Factor Result

(dBuV/m) Remark 2492.096 2492.552 2497.416 2483.584 H H V V 47.45 31.50 49.27 35.81 1.60 1.60 0.92 0.87 49.05 33.11 50.19 36.68 Peak Ave. Peak Ave. Limit@3m

(dBuV/m) Peak Ave. 54 74 74 54 54 74 74 54 Limit@3m

(dBuV/m) Peak Ave. 74 54 54 74 54 74 74 54 Margin

(dB) Table

(Deg.)

-25.23

-20.83

-22.55

-18.07 285 285 233 233 Margin

(dB) Table

(Deg.)

-24.95

-20.89

-23.81

-17.32 285 285 233 233 Modulation Standard: IEEE 802.11g (12Mbps) Test Date: Jun. 29, 2005 Temperature: 26 Humidity: 6 a) Channel 1 J 8% Atmospheric pressure: 1020mmHg Frequency

(MHz) Ant-Pol H/V Meter Reading Corrected Factor Result

(dBuV/m) Remark 2389.968 2389.968 2387.928 2389.968 H H V V b) Channel 11 48.36 32.03 51.17 36.24 1.25 1.25 0.54 0.55 49.61 33.28 51.71 36.79 Peak Ave. Peak Ave. Frequency

(MHz) Ant-Pol H/V Meter Reading Corrected Factor Result

(dBuV/m) Remark 2493.996 2491.982 2483.812 2486.016 Notes:

H H V V 48.46 31.33 49.97 37.74 1.61 1.60 0.87 0.88 50.07 32.93 50.85 35.62 Peak Ave. Peak Ave. Limit@3m

(dBuV/m) Peak Ave. 74 54 54 74 54 74 74 54 Limit@3m

(dBuV/m) Peak Ave. 54 74 54 74 54 74 74 54 Margin

(dB) Table

(Deg.)

-24.39

-20.72

-22.29

-17.21 285 285 233 233 Margin

(dB) Table

(Deg.)

-23.93

-21.07

-23.15

-18.38 285 285 233 233 1. Result = Meter Reading + Factor 2. Factor = Antenna Factor + Cable Loss Amplifier 3. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and video bandwidth is 3 MHz for Peak detection at frequency above 1GHz. 4. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and video bandwidth is 10Hz for Average detection at frequency above 1GHz. Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 87 of 92 Ant High

(m) 1.1 1.1 1.0 1.0 Ant High

(m) 1.1 1.1 1.0 1.0 Ant High

(m) 1.1 1.1 1.0 1.0 Ant High

(m) 1.1 1.1 1.0 1.0 FCC Test Report: FI05012702-A 9. Power Spectral Density Measurement 9.1. Test Limit The Maximum of Power Spectral Density Measurement is 8dBm. 9.2. Test Procedures 1.The transmitter output was connected to spectrum analyzer. 2.The spectrum analyzers resolution bandwidth were set at 3KHz RBW and 30KHz VBW as that of the fundamental frequency. Set the sweep time=span/3KHz. 3.The power spectral density was measured and recorded. 4.The Sweep time is allowed to be longer than span/3KHz for a full response of the mixer in the spectrum analyzer. 9.3. Test Setup LayoutG 9.4. List of Measuring Equipment Used Instrument/Ancillary Spectrum Analyzer Type FSP40 Manufacturer Serial No. R&S 100047 Valid Date. 2005/12/28 9.5. Test Result and Data

(1) Modulation Standard: IEEE 802.11b (11Mbps) Test Date: Jun. 28, 2005 Temperature: 27 Humidity: 6 J 4% Atmospheric pressure: 1015mmHg Channel Frequency 01 06 11 2412 2437 2462 Maximum Power Density of 3 kHz Bandwidth

(dBm)

-17.84

-17.78

-17.69

(2) Modulation Standard: IEEE 802.11g (12Mbps) Test Date: Jun. 28, 2005 Temperature: 27 Humidity: 6 J 4% Atmospheric pressure: 1015mmHg Channel Frequency 01 06 11 2412 2437 2462 Maximum Power Density of 3 kHz Bandwidth

(dBm)

-20.19

-20.45

-20.21 Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 88 of 92 FCC Test Report: FI05012702-A Modulation Standard: IEEE 802.11b (11Mbps) Channel 01 Channel 06 Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 89 of 92 FCC Test Report: FI05012702-A Channel 11 Modulation Standard: IEEE 802.11g (12Mbps) Channel 01 Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 90 of 92 Channel 06 Channel 11 FCC Test Report: FI05012702-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 91 of 92 10. Restricted Bands of Operation Only spurious emissions are permitted in any of the frequency bands listed below:

FCC Test Report: FI05012702-A MHz 0.09000 0.11000 0.49500 0.505**

2.17350 2.19050 4.12500 4.12800 4.17725 4.17775 4.20725 4.20775 6.21500 6.21800 6.26775 6.26825 6.31175 6.31225 8.29100 8.29400 8.36200 8.36600 8.37625 8.38675 8.41425 8.41475 12.29000 12.29300 12.51975 12.52025 12.57675 12.57725 13.36000 13.41000 MHz 16.42000 16.42300 16.69475 16.69525 16.80425 16.80475 25.50000 25.67000 37.50000 38.25000 73.00000 74.60000 74.80000 75.20000 108.00000 121.94000 123.00000 138.00000 149.90000 150.05000 156.52475 156.52525 156.70000 156.90000 162.01250 167.17000 167.72000 173.20000 240.00000 285.00000 322.00000 335.40000 MHz 399.9 410.0 608.0 614.0 960.0 1240.0 1300.0 1427.0 1435.0 1626.5 1645.5 1646.5 1660.0 1710.0 1718.8 1722.2 2200.0 2300.0 2310.0 2390.0 2483.5 2500.0 2655.0 2900.0 3260.0 3267.0 3332.0 3339.0 3345.8 3358.0 3600.0 4400.0 GHz 4.500 5.250 5.350 5.460 7.250 7.750 8.025 8.500 9.000 9.200 9.300 9.500 10.600 12.700 13.250 13.400 14.470 14.500 15.350 16.200 17.700 21.400 22.010 23.120 23.600 24.000 31.200 31.800 36.430 36.500 Above 38.6

**: Until February 1, 1999, this restricted band shall be 0.490-0.510 MHz 10.1. Labeling Requirement The device shall bear the following statement in a conspicuous location on the device:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Jul. 13, 2005 92 of 92