Indoor Camera Quick Start Guide Welcome to Blue by ADT Youve made a great decision to help protect your family and home with the purchase of your Blue by ADT Indoor Camera. Use your Blue Indoor Camera to watch and record activities in your home. This WiFi-enabled security camera can be set up with custom motion detection to record videos or take photos. Box Includes:
Indoor Camera with Stand Power Supply Mounting Hardware Before You Get Started You will need:
WiFi and broadband internet connection with at least 2 Mbps upload speed iOS or Android device Phillips screwdriver or drill with Phillips driver bit (optional) Power drill with drill bits for pilot holes (optional) Setting Up Your Blue by ADT Indoor Camera Getting started is simple. Just follow these steps:
1. Plug your Blue by ADT Indoor Camera into an outlet. 2. Download the iOS or Android app by visiting www.BluebyADT.com/apps 3. Open the app to create an account or log in to an existing account. 4. Go to Settings > Devices > Add Device and select your Blue Indoor Camera. 5. Follow the in-app screens to pair your device to your WiFi network or your Blue by ADT Extender + Chime. 6. Set up the device in your desired location. Optionally, use the included mounting template if you are mounting the camera on a wall or ceiling. LED Reference Guide Your Blue Indoor Camera has an LED light on the front of the unit. This quick reference guide will help you understand your systems status. LED Light Patterns Blue by ADT State Turning On QR Code Scanning Mode Attempting to Connect to WiFi WiFi Protected Setup (WPS) Pairing Connected to WiFi, but Not Paired to an Account Upgrading Firmware Live Video/Audio Call Video Clip Recording LED Behavior Solid Blue Blinking Blue Blinking Green Alternating Green & Blue Double Blink Blue, Repeated Double Blink Green, Repeated Standard Mode: LED Off HomeKit Mode: Blinking Red Slowly Standard Mode: LED Off HomeKit Mode: Blinking Blue Slowly LED Light Patterns Amazon Alexa State Alexa Microphone Off Alexa Core Listening, Thinking, Speaking Alexa Alerts Timers, Alarms, Reminders Alexa Notifications Notification Arrives, Notification Queued Alexa Device Change Volume Changes Alexa Error System & Device Errors, Alexa Service Unavailable Alexa Configuration Change Factory Reset, Wake Word Change Alexa Idle Alexa Call Drop-in Alexa Do Not Disturb Privacy On LED Behavior Solid Red Alternating Cyan and Blue Alternating Cyan and Blue Solid Yellow Solid White Solid Red Solid Orange LED Off Blinking Green Solid Purple Solid Red On-Device Storage Your camera supports on-device storage using a Class 10 or better SD card with minimum storage of 16GB and a maximum of 128GB. Factory Resetting Your Blue Indoor Camera To factory reset your device, press and hold the button on its back for greater than 10 seconds while the device is powered on. Setting Up Amazon Alexa To pair your Blue by ADT Indoor Camera with Alexa:
1. Click on Settings > Devices then choose the device you would like to add to Alexa. 2. Select Advanced Settings for the device and tap on Set Up Alexa. your device. 3. You will be prompted to log in with Alexa to pair Important Safety Information 1. Read and keep these instructions. 2. Heed all warnings. 3. Clean only with a dry cloth. 4. Set up in accordance with the manufacturers instructions. 5. Do not place this device in a confined space such as a bookcase or similar unit without proper ventilation. 6. Do not set up near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat. 7. The device shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the device. 8. Only use attachments /accessories specified by the manufacturer. 9. Follow all local waste and recycling laws when disposing of batteries. 10. Use only with the stand, tripod, or bracket specified by the manufacturer, or sold with the device. 11. Only use the AC adapter supplied with this device. Do not use a power supply from another device or another manufacturer. Using any other power cable or power supply may cause damage to the device and void your warranty. 12. Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one wider than the other. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 13. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where where it exits from the device. 14. Do not drop the device or subject it to physical shock. 15. Unplug this device during lightning storms or when unused for long periods. 16. Do not use high voltage products around this device (eg. electrical swatter) as this product may malfunction due to electrical shock. 17. Do not remove the cover. Refer all servicing to qualified service personnel if a power-supply cord or plug is damaged, liquid was spilled, objects fell into the device, the device was exposed to rain or moisture, doesnt operate normally, or was dropped. 18. WARNING: This product contains chemicals known to the State of California to cause cancer and congenital disabilities or other reproductive harm. Wash hands after handling. Indoor Camera Operating Specifications Temperature: 32 to 104F (0 to 40C) Humidity: 0% to 80% RH (non-condensing) Regulatory Approvals FCC Statement (US) This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designated to provide reasonable protections against harmful interference in a residential installation. This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. FCC WARNING: This equipment may generate or use radiofrequency energy. Changes or modifications to the equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. End-users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Open-Source Software Notice To obtain the source code under GPL, LGPL, MPL, and other open-source licenses that are contained in this product, please visit www.bluebyadt.com/opensource. In addition to the source code, all referred license terms warranty disclaimers, and copyright notices are available for download. Warranty For Blue by ADT warranty details, visit:
www.BluebyADT.com/warranty Questions Give us a call at 877-464-7437 or visit us at www.BluebyADT.com/support Company Address LifeShield, LLC 2021 Cabot Blvd. West Langhorne, PA 19047 2019. LifeShield LLC dba LifeShield, An ADT Company. All third party marks are the property of their respective owners and used under license. Unauthorized use is strictly prohibited. www.BluebyADT.com