all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
User manual | Users Manual | 495.59 KiB | May 01 2018 | |||
1 2 3 |
|
Internal Photos | Internal Photos | 504.30 KiB | August 28 2014 | |||
1 2 3 |
|
External Photos | External Photos | 303.93 KiB | August 28 2014 | |||
1 2 3 |
|
Label | ID Label/Location Info | 3.65 MiB | August 28 2014 | |||
1 2 3 |
|
Agent letter | Cover Letter(s) | 27.63 KiB | May 01 2018 | |||
1 2 3 |
|
Class 2 letter | Cover Letter(s) | 161.76 KiB | May 01 2018 | |||
1 2 3 |
|
Confidentiality letter | Cover Letter(s) | 110.28 KiB | May 01 2018 | |||
1 2 3 |
|
MPE report | RF Exposure Info | 259.02 KiB | May 01 2018 | |||
1 2 3 | Operational description | Operational Description | January 05 2018 | confidential | ||||
1 2 3 |
|
Setup photos | Test Setup Photos | 427.49 KiB | May 01 2018 | |||
1 2 3 |
|
TR | Test Report | 760.11 KiB | May 01 2018 | |||
1 2 3 |
|
Agents Letter | Cover Letter(s) | 50.79 KiB | August 28 2014 | |||
1 2 3 | Antenna Details | Operational Description | August 28 2014 | confidential | ||||
1 2 3 | Block Diagram | Block Diagram | August 28 2014 | confidential | ||||
1 2 3 |
|
DoC Attestation | Attestation Statements | 51.04 KiB | August 28 2014 | |||
1 2 3 |
|
Model Difference Letter | Cover Letter(s) | 67.55 KiB | August 28 2014 | |||
1 2 3 |
|
RF Exposure Report | RF Exposure Info | 161.83 KiB | August 28 2014 | |||
1 2 3 | Schematics | Schematics | August 28 2014 | confidential | ||||
1 2 3 |
|
Test Report | Test Report | 3.23 MiB | August 28 2014 | |||
1 2 3 |
|
Test Setup Photos | Test Setup Photos | 411.83 KiB | August 28 2014 |
1 2 3 | User manual | Users Manual | 495.59 KiB | May 01 2018 |
NA301 Compact Z-Wave Gateway i User Guide Table of Contents CHAPTER 1 INTRODUCTION ............................................................................................. 1 Package Contents .............................................................................................................. 1 Features .............................................................................................................................. 1 LEDs ................................................................................................................................... 2 CHAPTER 2 INITIAL INSTALLATION .............................................................................. 4 Requirements ..................................................................................................................... 4 Procedure ........................................................................................................................... 4 CHAPTER 3 CONFIGURATION .......................................................................................... 5 Configuration Program .................................................................................................... 5 Home Screen ...................................................................................................................... 6 Regulatory Approvals ....................................................................................................... 7 Copyright 2014. All Rights Reserved. Document Version: 1.0 All trademarks and trade names are the properties of their respective owners. ii Chapter 1 Introduction 1 This Chapter provides an overview of the Compact Z-Wave Gateway's fea-
tures and capabilities. Congratulations on the purchase of your new Compact Z-Wave Gateway. The Compact Z-Wave Gateway is a consumer electronic device, which is used for home monitoring and security. Package Contents The following items should be included:
The Compact Z-Wave Gateway Unit Power Adapter If any of the above items are damaged or missing, please contact your dealer immediately. Features MT7620A processor with128MB Flash and 128MB SDRAM One Ethernet port with RJ45 connector Front Panel LEDs Z-Wave Transceiver USB 2.0 port WPS button Reset button Sync button Power In connector Internal antenna for WiFi and Z-Wave 1 LEDs Top-mounted LEDs The Compact Z-Wave Gateway has five LEDs. Service Z-Wave WiFi WAN POWER On (Green) - Control Point has made a successful activation to the Portal Server. Off - Cloud service is not available. Flashing - Attempting to establish a connection to the Portal Server. On (Green) - Z-Wave function enabled. Off - Z-Wave function disabled. Flashing - Learn/exclusion mode is on. On - Wireless connection available Off - No Wireless connection available. Flashing - Data is being transmitted or received via the Wireless connection. On (Green) - Ethernet connection established. Off - No active connection on the corresponding Ethernet port. Flashing - Data is being transmitted or received via the Ethernet
(hub) port. On (Green) - Power On Off - Power Off Flashing - Reboot or Firmware upgrade. 2 Rear/Side Panel Connect the supplied power adapter here. Use standard LAN cable (RJ45 connector) to connect your PC to the port. The connector is USB host with support for mass storage device. Push this button to synchronize for portal server or Z-Wave clients. Push the WPS button on the device and on your other wireless device to perform WPS function that easily creates an encryption-secured wireless connection automatically. This button has two (2) functions:
Reboot. When pressed and released, the Compact Z-Wave Gate-
way will reboot (restart). Clear All Data. This button can also be used to clear ALL data and restore ALL settings to the factory default values. To Clear All Data and restore the factory default values:
1. Power On. 2. Keep holding the Reset Button down for 8 seconds. Release the Reset Button. The Compact Z-Wave Gateway is now using the factory default values. Power Port ETHERNET Port USB Port Sync Button WPS Button Reset 3 Chapter 2 Initial Installation 2 This Chapter covers the software installation of the Compact Z-Wave Gateway. Requirements Use a standard 10/100BaseT network (UTP) cable with RJ45 connector. Procedure 1. Choose an Installation Site Select a suitable place to install the Compact Z-Wave Gateway. 2. Connect LAN Cable Use standard LAN cable to connect devices to the Ethernet port on the Compact Z-Wave Gateway. 4. Power Up Connect the supplied power adapter to the Compact Z-Wave Gateway. Use only the power adapter provided. Using a different one may cause hardware damage. 5. Check the LEDs The POWER LED should be ON. The WAN LED should be ON (provided the PC is also ON.) 4 Chapter 3 Configuration 3 This Chapter provides Setup details of the Z-Wave System. Configuration Program This Web Portal can help you to set up your Z-Wave system with the compatible devices. It allows you to securely access your home remotely from the Internet or a mobile phone. If you want to be notified when the events occur at home, the system will send you email and SMS notifications. Preparation Before attempting to configure the Compact Z-Wave Gateway, please ensure that:
Your PC can establish a physical connection to the Compact Z-Wave Gateway. The PC and the Compact Z-Wave Gateway must be directly connected (using the Hub port on the Compact Z-Wave Gateway) or on the same LAN segment. The Compact Z-Wave Gateway must be installed and powered ON. Using your Web Browser To establish a connection from your PC to the Compact Z-Wave Gateway:
1. Start your WEB browser. 2. In the Address box, enter "HTTP://" and the IP Address of the Compact Z-Wave Gateway, as in this example, which uses the Compact Z-Wave Gateway's default IP Address:
HTTP://192.168.0.1 3. When prompted for the User name and Password, enter values as follows:
User name admin Password admin 5 Home Screen After log in, you will see the Home screen. When you connect in future, you will see this screen when you connect. An example screen is shown below. 6 Regulatory Approvals FCC Statement This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver Increase the separation between the equipment and receiver. is connected. Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
(Example - use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications not expressly approved by the party responsible for compli-
ance could void the authority to operate equipment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. CE Approvals The Compact Z-Wave Gateway and the Ethernet Compact Z-Wave Gateway meet the guidelines of the European Union and comply with the 99/5/EEC and RTTE 99/5EG directives, including the following standards:
EN 60950-1 7 This is a Class B product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. 8
1 2 3 | Internal Photos | Internal Photos | 504.30 KiB | August 28 2014 |
Report No: T140708D15 INTERNAL PHOTOGRAPHS OF EUT Page 5 Rev.00 Report No: T140708D15 Page 6 Rev.00 Report No: T140708D15 Page 7 Rev.00 Report No: T140708D15 Antenna Page 8 Rev.00
1 2 3 | External Photos | External Photos | 303.93 KiB | August 28 2014 |
Report No: T140708D15 EXTERNAL PHOTOGRAPHS OF EUT Page 1 / 8 Rev.00 Report No: T140708D15 Page 2 Rev.00 Report No: T140708D15 Asia power Device Inc. / WA-12M12FU Page 3 Rev.00 Report No: T140708D15 Sunny / SYS-1381-1212-W2 Page 4 Rev.00
1 2 3 | Label | ID Label/Location Info | 3.65 MiB | August 28 2014 |
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two condit ons: (1) this device may not cause hamful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003, This device complies with Part 15 of the FCC Rules, Operation is subject to the following two condit ons: (1) this device may not cause hamful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003, This device complies with Part 15 of the FCC Rules, Operation is subject to the following two condit ons: (1) this device may not cause hamful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003, This device complies with Part 15 of the FCC Rules, Operation is subject to the following two condit ons: (1) this device may not cause hamful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003, This device complies with Part 15 of the FCC Rules, Operation is subject to the following two condit ons: (1) this device may not cause hamful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003, This device complies with Part 15 of the FCC Rules, Operation is subject to the following two condit ons: (1) this device may not cause hamful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003, This device complies with Part 15 of the FCC Rules, Operation is subject to the following two condit ons: (1) this device may not cause hamful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003, This device complies with Part 15 of the FCC Rules, Operation is subject to the following two condit ons: (1) this device may not cause hamful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003, This device complies with Part 15 of the FCC Rules, Operation is subject to the following two condit ons: (1) this device may not cause hamful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003, This device complies with Part 15 of the FCC Rules, Operation is subject to the following two condit ons: (1) this device may not cause hamful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003, This device complies with Part 15 of the FCC Rules, Operation is subject to the following two condit ons: (1) this device may not cause hamful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003, This device complies with Part 15 of the FCC Rules, Operation is subject to the following two condit ons: (1) this device may not cause hamful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003, This device complies with Part 15 of the FCC Rules, Operation is subject to the following two condit ons: (1) this device may not cause hamful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003,
1 2 3 | Agent letter | Cover Letter(s) | 27.63 KiB | May 01 2018 |
Date: 2017/12/25 TO:
Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: P27NA301ZW To whom it may concern:
We, the undersigned, hereby authorize Sam Chuang at Compliance Certification Services Inc. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Sercomm Corporation. This authorization is valid until further written notice from the applicant. Name (Printed): Nick Wu Signature:
Title: Engineer On behalf of Company: Sercomm Corporation Telephone: +886-2-2655-3988 ext 2631
1 2 3 | Class 2 letter | Cover Letter(s) | 161.76 KiB | May 01 2018 |
> ,
'DWH
)HGHUDO &RPPXQLFDWLRQV &RPPLVVLRQ
$XWKRUL]DWLRQ DQG (YDOXDWLRQ 'LYLVLRQ
2DNODQG 0LOOV 5RDG
&ROXPELD 0'
68%-(&7 )&& &ODVV ,, 3HUPLVVLYH FKDQJH IRU )&& ,' 31$=:
7R :KRP ,W 0D\ &RQFHUQ
:H WKH XQGHUVLJQHG ZRXOG OLNH WR UHTXHVW D &ODVV ,, 3HUPLVVLYH &KDQJH IRU WKH )&& ,' 31$=:
ZKLFK ZDV RULJLQDOO\ JUDQWHG RQ
3OHDVH EH LQIRUPHG WKDW RXU PDMRU FKDQJH LQ HTXLSPHQW XQGHU WKLV DSSOLFDWLRQ DUH DV IROORZV
$GGHG 0+] IUHTXHQF\ E\ )LUPZDUH
$GGHG %UDQG 1(;,$
$GGHG 3URGXFW QDPH 1H[LD %ULGJH 6PDUW +RPH &RQWUROOHU
$GGHG PRGHO QXPEHU GXH WR WKH PDUNHWLQJ SXUSRVH %51; =:37%; 7*);+8%
*[[[[[[[[ 9HUD(GJH[[[[[[[[ 75)=:[[[[[[[[ WKH VW [ VKRXOG EH EODQN RU WKH UHVW [
FRXOG EH WR $ WR = EODQN RU IRU PDUNLQJ SXUSRVH
,I \RX KDYH DQ\ TXHVWLRQV UHJDUGLQJ WKLV DSSOLFDWLRQ SOHDVH IHHO IUHH WR FRQWDFW PH
6LQFHUHO\
BBBBB
&RPSDQ\ 1DPH
$GGUHVV 1DPH DQG -RE 7LWOH
(PDLO 7HO
BBBBBBB 6HUFRPP &RUSRUDWLRQ
) 1R <XDQ4X 6W 1DQ.DQJ 7DLSHL 7DLZDQ 52&
1LFN :X (QJLQHHU 1LFNBZX#VHUFRPPFRP
H[W
1 2 3 | Confidentiality letter | Cover Letter(s) | 110.28 KiB | May 01 2018 |
7R EH SDVWHG RQWR FRPSDQ\ OHWWHUKHDG!
7R
6*6 1RUWK $PHULFD ,QF
2OG 3HDFKWUHH 5RDG 68,7(
6XZDQHH *HRUJLD 8QLWHG 6WDWHV
)URP 6HUFRPP &RUSRUDWLRQ
) 1R <XDQ4X 6W 1DQ.DQJ
7DLSHL
7DLZDQ 52&
5HJDUGLQJ
&RQILGHQWLDOLW\ 5HTXHVW UHJDUGLQJ DSSOLFDWLRQ IRU )&& ,' 31$=:
/21* 7(50 &21),'(17,$/,7<
3XUVXDQW WR &)5 6HFWLRQ DQG RI WKH FRPPLVVLRQV UXOHV WKH DSSOLFDQW KHUHE\ UHTXHVW FRQILGHQWLDO WUHDWPHQW RI WKH GRFXPHQWV OLVWHG EHORZ DVVRFLDWHG ZLWK WKH FHUWLILFDWLRQ DSSOLFDWLRQ UHIHUHQFHG DERYH
2SHUDWLRQDO 'HVFULSWLRQV 7KH GRFXPHQWV DERYH FRQWDLQ SURSULHWDU\ LQIRUPDWLRQ QRW UHOHDVHG WR WKH SXEOLF 3XEOLF GLVFORVXUH RI WKLV LQIRUPDWLRQ PD\ SURYH KDUPIXO WR WKH EXVLQHVV RI WKH DSSOLFDQW
6LQFHUHO\
BBBBBBBBBBBBBBBBBBBBB 6LJQDWXUH 1LFN :X
(QJLQHHU 6HUFRPP &RUSRUDWLRQ
1 2 3 | MPE report | RF Exposure Info | 259.02 KiB | May 01 2018 |
Compliance Certification Services Inc. FCC ID: P27NA301ZW Reference No: T170217D18-MF Report No.: T171130D01-MF IEEE C95.1 KDB 447498 D03 47 C.F.R. Part 1, Subpart I, Section 1.1310 47 C.F.R. Part 2, Subpart J, Section 2.1091 RF EXPOSURE REPORT For Smart Home Gateway, Z-Wave Tool Box, Smart Home Controller, Nexia Bridge NA301-ZWxxxxxxxx (the 1st x should be "blank" or "-"; the rest x could be 0 to 9, A to Z, "blank" or - , for marking purpose); G150xxxxxxxx; VeraEdgexxxxxxxx;
TRF-ZW2xxxxxxxx (the 1st x should be "blank" or "-" ; the rest x could be 0 to 9, A to Z, "blank" or "-", for marking purpose); ZWP-TBX; TGFX-HUB1; BR200NX Model:
Sercomm; MiOS Limited; Accenture; Amdocs;
Trade Name:
Intamac; NorthQ; Vera Control, Ltd.; URC; Telguard; Zwaveproducts.com; NEXIA Issued to Sercomm Corporation 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. Issued by Compliance Certification Services Inc. No.11, Wugong 6th Rd., Wugu Dist., New Taipei City 24891, Taiwan. (R.O.C.) http://www.ccsrf.com service@ccsrf.com Issued Date: December 14, 2017 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 1 Rev.05 Compliance Certification Services Inc. FCC ID: P27NA301ZW Reference No: T170217D18-MF Report No.: T171130D01-MF Revision History Rev. Issue Date Revisions Effect Page Revised By 00 01 02 03 04 05 2014/08/22 Initial Issue 2015/09/04 Rev. (01) 2016/12/29 Rev. (02) 2017/02/22 Rev. (03) 2017/12/14 Rev. (04) 2018/01/04 Rev. (05) ALL ALL ALL ALL ALL Angel Cheng Doris Chu Angel Cheng Angel Cheng Allison Chen P.4, P.7 Allison Chen Rev. (01) 1. Applicant added two adapters. (Adapter model name: MU12AR120100-A1 (VI) and WA-12M12FU (VI)) 2. Applicant update standard. 3. Applicant changes model name and trade name. 4. Other information, please refer to the T140708D15 and this test report. Rev. (02) 1. Applicant added model: TGFX-HUB1 & Trade Name: Telguard 2. Other information, please refer to the T161223D06 and this test report. Rev. (03) 1. Applicant added model: ZWP-TBX, Trade Name: Zwaveproducts.com and Product name: Z-Wave Tool Box 2. Other information, please refer to the T161223D06 and this test report. Rev. (04) 1. Applicant added model:BR200NX, Trade Name: NEXIA and Product name: Nexia Bridge, Smart Home Controller. 2. Other information, please refer to the T170217D18 and this test report. Rev. (05) 1. Modify Frequency band (Operating). 2. Added 916MHz in Z-wave. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 2 Rev.05 Compliance Certification Services Inc. FCC ID: P27NA301ZW Reference No: T170217D18-MF Report No.: T171130D01-MF TABLE OF CONTENTS 1. LIMIT .................................................................................................................... 4 2. EUT SPECIFICATION .......................................................................................... 4 3. TEST RESULTS................................................................................................... 6 4. MAXIMUM PERMISSIBLE EXPOSURE .............................................................. 7 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 3 Rev.05 Compliance Certification Services Inc. FCC ID: P27NA301ZW Reference No: T170217D18-MF Report No.: T171130D01-MF 1. LIMIT According to 15.247(i), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See 1.1307(b)(1) of this chapter. 2. EUT SPECIFICATION Smart Home Gateway, Z-Wave Tool Box, Smart Home Controller, Nexia Bridge Sercomm; MiOS Limited; Accenture; Amdocs; Intamac; NorthQ;
Vera Control, Ltd.; URC; Telguard, Zwaveproducts.com, NEXIA NA301-ZWxxxxxxxx (the 1st x should be "blank" or "-"; the rest x could be 0 to 9, A to Z, "blank" or - , for marking purpose) ;
G150xxxxxxxx ; VeraEdgexxxxxxxx ; TRF-ZW2xxxxxxxx (the 1st x should be
"blank" or "-"; the rest x could be 0 to 9, A to Z, "blank" or - , for marking purpose);
TGFX-HUB1; ZWP-TBX; BR200NX 1. All the model numbers (list on this report) are identical, just for marketing purpose only except Brand. 2. The means of x (The x in model name can be 0 to 9, A to Z, blank or - , for marking purpose) on model number are identical, just for marketing purpose only. 3. Client consigns only one model sample (Model number: NA301-ZW-US) to test. Therefore testing Lab. just guarantees the units, which have been tested. Product Trade Name Model Number Model Discrepancy RF Module MEDIATEK Model MT7620A Frequency band
(Operating) Device category 802.11b/g/n HT20: 2.412GHz ~ 2.462GHz 802.11n HT40: 2.422GHz ~ 2.452GHz 908MHz, 916MHz Others Portable (<20cm separation) Mobile (>20cm separation) Others Exposure classification Occupational/Controlled exposure (S = 5mW/cm2) General Population/Uncontrolled exposure
(S=1mW/cm2) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 4 Rev.05 Compliance Certification Services Inc. FCC ID: P27NA301ZW Reference No: T170217D18-MF Report No.: T171130D01-MF For 2.4G Antenna Specification For Z-Wave Maximum Average output power Maximum Tune up Power Evaluation applied MPE Evaluation*
SAR Evaluation N/A This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 5 Rev.05 Monopole Antenna Antenna Gain :3.62 dBi(Numeric gain:2.30)PCB Antenna Antenna Gain :4.99 dBi(Numeric gain:3.16)WorstPIFA Antenna Antenna Gain :0.56 dBi(Numeric gain:1.14)2.4GHz:Directional gain =4.99 dBi+10log( 2 )=8.00 dBi(Numeric gain:6.31)IEEE 802.11b Mode:17.99 dBm(62.951 mW)IEEE 802.11g Mode:16.64 dBm(46.132 mW)IEEE 802.11n HT 20 Mode: 17.27 dBm(53.333 mW)IEEE 802.11n HT 40 Mode: 17.01 dBm(50.234 mW)Z-Wave2.00 dBm(1.585 mW)IEEE 802.11b Mode:19.00 dBm(79.433 mW)IEEE 802.11g Mode:18.00 dBm(63.096 mW)IEEE 802.11n HT 20 Mode: 18.00 dBm(63.096 mW)IEEE 802.11n HT 40 Mode: 19.00 dBm(79.433 mW)Z-Wave2.00 dBm(1.585 mW) Compliance Certification Services Inc. FCC ID: P27NA301ZW Reference No: T170217D18-MF Report No.: T171130D01-MF 3. TEST RESULTS No non-compliance noted. Calculation Given
&
Where E = Field strength in Volts / meter P = Power in Watts G = Numeric antenna gain d = Distance in meters S = Power density in milliwatts / square centimeter Combining equations and re-arranging the terms to express the distance as a function of the remaining variables yields:
Changing to units of mW and cm, using:
Yields P (mW) = P (W) / 1000 and d (cm) = d(m) / 100 Equation 1 Where d = Distance in cm P = Power in mW G = Numeric antenna gain S = Power density in mW / cm2 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 6 Rev.05 dGPE303772ES237730dGPS220796.0100/3771000/30dGPdGPS Compliance Certification Services Inc. FCC ID: P27NA301ZW Reference No: T170217D18-MF Report No.: T171130D01-MF 4. MAXIMUM PERMISSIBLE EXPOSURE Substituting the MPE safe distance using d = 20 cm into Equation 1:
Where P = Power in mW G = Numeric antenna gain S = Power density in mW / cm2 IEEE 802.11b mode:
IEEE 802.11g mode:
IEEE 802.11n HT20 mode:
IEEE 802.11n HT40 mode:
Z-Wave:
This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 7 Rev.05 GPS000199.0Ch.Frq.(MHz)P (mW)Gain (num.)D (cm)Power density in mW / cm2Limit (mW/cm2)1241279.4333.16200.05001Ch.Frq.(MHz)P (mW)Gain (num.)D (cm)Power density in mW / cm2Limit (mW/cm2)1241263.0963.16200.03971Ch.Frq.(MHz)P (mW)Gain (num.)D (cm)Power density in mW / cm2Limit (mW/cm2)6243763.0966.31200.07921Ch.Frq.(MHz)P (mW)Gain (num.)D (cm)Power density in mW / cm2Limit (mW/cm2)1241279.4336.31200.09971Frq.(MHz)P (mW)Gain (num.)D (cm)Power density in mW / cm2Limit (mW/cm2)9081.5851.14200.000419161.5851.14200.00041
1 2 3 | Setup photos | Test Setup Photos | 427.49 KiB | May 01 2018 |
Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 APPENDIX I PHOTOGRAPHS OF TEST SETUP CONDUCTED EMISSION SETUP PHOTO Page 30 Rev.01 Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 RADIATED EMISSION SETUP PHOTOS Below 1GHz Above 1GHz Page 31 Rev.01 Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 Powerline Conducted Emissions Setup Photos Page 32 Rev.01
1 2 3 | TR | Test Report | 760.11 KiB | May 01 2018 |
Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 FCC 47 CFR PART 15 SUBPART C TEST REPORT For Smart Home Gateway, Z-Wave Tool Box, Nexia Bridge, Smart Home Controller Model:
NA301-ZWxxxxxxxx (the 1st x should be "blank" or "-"; the rest x could be 0 to 9, A to Z, "blank" or - , for marking purpose); BR200NX; ZWP-TBX; TGFX-HUB1;
G150xxxxxxxx (the 1st x should be ""blank"" or ""-"" ; the rest x could be 0 to 9, A to Z, ""blank"" or ""-"", for marking purpose); VeraEdgexxxxxxxx (the 1st x should be ""blank"" or ""-"" ; the rest x could be 0 to 9, A to Z, ""blank"" or ""-"", for marking purpose); TRF-ZW2xxxxxxxx (the 1st x should be "blank" or "-" ; the rest x could be 0 to 9, A to Z, "blank" or "-", for marking purpose) Sercomm; MiOS Limited; Accenture; Amdocs;
Trade Name:
Intamac; NorthQ; Vera Control, Ltd.; URC; Telguard; Zwaveproducts.com; NEXIA Issued to Sercomm Corporation 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. Issued by Compliance Certification Services Inc. Wugu Laboratory No.11, Wugong 6th Rd., Wugu Dist., New Taipei City 24891, Taiwan. (R.O.C.) http://www.ccsrf.com service@ccsrf.com Issued Date: December 13, 2017 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. Page 1 / 32 Rev.00 Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 Revision History Rev. Issue Date 00 December 13, 2017 Initial Issue Revisions 01 January 4, 2018 Rev. (01) Rev. (01) 1. Added field strength of fundamental frequency with AVG limit. 2. Modify setup photo below 1GHz. Effect Page Revised By ALL Allison Chen P.22, P.31 Allison Chen Page 2 Rev.01 Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION ...................................................................................... 4 2. EUT DESCRIPTION .......................................................................................................... 6 3. TEST METHODOLOGY .................................................................................................... 8 3.1 EUT CONFIGURATION ...................................................................................................... 8 3.2 EUT EXERCISE ................................................................................................................ 8 3.3 GENERAL TEST PROCEDURES .......................................................................................... 8 3.4 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS ......................................... 9 3.5 DESCRIPTION OF TEST MODES ....................................................................................... 10 4. INSTRUMENT CALIBRATION ........................................................................................ 11 4.1 MEASURING INSTRUMENT CALIBRATION ...................................................................... 11 4.2 MEASUREMENT EQUIPMENT USED ....................................................................... 11 4.3 MEASUREMENT UNCERTAINTY ............................................................................. 12 5. FACILITIES AND ACCREDITATIONS ............................................................................ 13 5.1 FACILITIES ................................................................................................................... 13 5.2 EQUIPMENT .................................................................................................................. 13 6. SETUP OF EQUIPMENT UNDER TEST ......................................................................... 14 6.1 SETUP CONFIGURATION OF EUT ..................................................................................... 14 6.2 SUPPORT EQUIPMENT ............................................................................................ 14 7. FCC PART 15.249 REQUIREMENTS ............................................................................. 15 7.1 OCCUPIED BANDWIDTH(99%) AND 6DB BANDWIDTH .................................................... 15 7.2 SPURIOUS EMISSION .............................................................................................. 17 7.3 POWERLINE CONDUCTED EMISSIONS ............................................................................. 27 APPENDIX I PHOTOGRAPHS OF TEST SETUP ................................................................. 30 Page 3 Rev.01 Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 1. TEST RESULT CERTIFICATION Applicant:
Manufacturer:
Sercomm Corporation 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. Sercomm Corporation 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. Equipment Under Test: Smart Home Gateway; Z-Wave Tool Box; Nexia Bridge;
Smart Home Controller Model Number:
Trade Name:
NA301-ZWxxxxxxxx (the 1st x should be "blank" or "-"; the rest x could be 0 to 9, A to Z, "blank" or - , for marking purpose); BR200NX; ZWP-TBX; TGFX-HUB1;
G150xxxxxxxx (the 1st x should be ""blank"" or ""-"" ; the rest x could be 0 to 9, A to Z, ""blank"" or ""-"", for marking purpose); VeraEdgexxxxxxxx (the 1st x should be ""blank""
or ""-"" ; the rest x could be 0 to 9, A to Z, ""blank"" or ""-"", for marking purpose); TRF-ZW2xxxxxxxx (the 1st x should be
"blank" or "-" ; the rest x could be 0 to 9, A to Z, "blank" or "-", for marking purpose) Sercomm; MiOS Limited; Accenture; Amdocs; Intamac;
NorthQ; Vera Control, Ltd.; URC; Telguard;
Zwaveproducts.com; NEXIA Date of Test:
December 5 ~ December 12, 2017 APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR Part 15 Subpart C No non-compliance noted We hereby certify that:
The above equipment was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10: 2013 and the energy emitted by the sample EUT tested as described in this report is in compliance with the requirements emission limits of FCC Rules Part 15.107, 15.109,15.207, 15.209 and 15.249. The test results of this report relate only to the tested sample EUT identified in this report. Page 4 Rev.01 Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 Approved by:
Tested by:
Sam Chuang Manager Compliance Certification Services Inc. Allison Chen Assistant Compliance Certification Services Inc. Page 5 Rev.01 Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 2. EUT DESCRIPTION Product Model Number Trade Name Model Discrepancy Smart Home Gateway; Z-Wave Tool Box; Nexia Bridge; Smart Home Controller NA301-ZWxxxxxxxx (the 1st x should be "blank" or "-"; the rest x could be 0 to 9, A to Z, "blank" or - , for marking purpose) Sercomm; MiOS Limited; Accenture; Amdocs; Intamac; NorthQ; Vera Control, Ltd.; URC; Telguard; Zwaveproducts.com; NEXIA 1. All the model numbers (list on this report) are identical, just for marketing purpose only except Brand. 2. The means of x (The x in model name can be 0 to 9, A to Z, blank or - , for marking purpose) on model number are identical, just for marketing purpose only. 3. Client consigns only one model sample (Model number:
NA301-ZW-US) to test. Therefore testing Lab. just guarantees the units, which have been tested. Received Date November 30, 2017 Power Supply Vdc from Power Adapter 1. APD / WA-12M12FU(V) I/P: 100-240VAC, 50/60HZ, 0.5A O/P: 12VDC, 1.0A 2. Sunny / SYS-1381-1212-W2 I/P: 100-240VAC, 50/60HZ, 0.5A O/P: 12VDC, 1.0A 3. Leader / MU12AR120100-A1 (VI) I/P: 100-240VAC, 50/60HZ, 0.3A O/P: 12VDC, 1.0A 4. APD / WA-12M12FU (VI) I/P: 100-240VAC, 50/60HZ, 0.5A O/P: 12VDC, 1.0A RF Module Manufacturer Model SD3502A-CNE3 Operating Frequency 916 MHz Modulation Technique FSK Transfer Rate 9.6/40/100kbps Page 6 Rev.01 Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 RF Field Strength 99.52dBuV/m @peak Antenna Gain 0.56dBi Antenna Specification PIFA Antenna Remark:
1. The sample selected for test was engineering sample that approximated to production product and was provided by manufacturer. 2. This submittal(s) (test report) is intended for FCC ID: P27NA301ZW filing to comply with Section 15.207, 15.209, 15.249. Page 7 Rev.01 Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 3. TEST METHODOLOGY The tests documented in this report were performed in accordance with ANSI C63.10:
2013 and FCC Part 15.205, Part 15.207, Part 15.209 3.1 EUT CONFIGURATION The EUT configuration for testing is installed on RF field strength measurement to meet the Commissions requirement and operating in a manner that intends to maximize its emission characteristics in a continuous normal application. 3.2 EUT EXERCISE The EUT was operated in the engineering mode to fix the TX frequency that was for the purpose of the measurements. According to its specifications, the EUT must comply with the requirements of the Section 15.107 and 15.109 under the FCC Rules Part 15 Subpart B and Section 15.207, 15.209,15.249 under the FCC Rules Part 15 Subpart C. 3.3 GENERAL TEST PROCEDURES Conducted Emissions The EUT is placed on the turntable, which is 0.8 m above ground plane. According to the requirements in ANSI C63.10: 2013 Conducted emissions from the EUT measured in the frequency range between 0.15 MHz and 30MHz using CISPR Quasi-peak and average detector modes. Radiated Emissions The EUT is placed on a turn table, which is 1.5 m above ground plane. The turntable shall rotate 360 degrees to determine the position of maximum emission level. EUT is set 3m away from the receiving antenna, which varied from 1m to 4m to find out the highest emission. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. In order to find out the maximum emissions, exploratory radiated emission measurements were made according to the requirements in ANSI C63.10: 2013. Page 8 Rev.01 Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 3.4 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS
(a) Except as shown in paragraph (d) of this section, only spurious emissions are permitted in any of the frequency bands listed below:
MHz MHz MHz GHz 0.090 - 0.110 10.495 - 0.505 2.1735 - 2.1905 4.125 - 4.128 4.17725 - 4.17775 4.20725 - 4.20775 6.215 - 6.218 6.26775 - 6.26825 6.31175 - 6.31225 8.291 - 8.294 8.362 - 8.366 8.37625 - 8.38675 8.41425 - 8.41475 16.42 - 16.423 16.69475 - 16.69525 16.80425 - 16.80475 25.5 - 25.67 37.5 - 38.25 73 - 74.6 74.8 - 75.2 108 - 121.94 123 - 138 149.9 - 150.05 156.52475 -
156.52525 156.7 - 156.9 12.29 - 12.293 162.0125 - 167.17 12.51975 - 12.52025 12.57675 - 12.57725 13.36 - 13.41 167.72 - 173.2 240 - 285 322 - 335.4 399.9 - 410 608 - 614 960 - 1240 1300 - 1427 1435 - 1626.5 1645.5 - 1646.5 1660 - 1710 1718.8 - 1722.2 2200 - 2300 2310 - 2390 2483.5 - 2500 2655 - 2900 3260 - 3267 3332 - 3339 3345.8 - 3358 3600 - 4400 4.5 - 5.15 5.35 - 5.46 7.25 - 7.75 8.025 - 8.5 9.0 - 9.2 9.3 - 9.5 10.6 - 12.7 13.25 - 13.4 14.47 - 14.5 15.35 - 16.2 17.7 - 21.4 22.01 - 23.12 23.6 - 24.0 31.2 - 31.8 36.43 - 36.5
(2) 1 Until February 1, 1999, this restricted band shall be 0.490-0.510 MHz. 2 Above 38.6
(b) Except as provided in paragraphs (d) and (e), the field strength of emissions appearing within these frequency bands shall not exceed the limits shown in Section 15.209. At frequencies equal to or less than 1000 MHz, compliance with the limits in Section 15.209 shall be demonstrated using measurement instrumentation employing a CISPR quasi-peak detector. Above 1000 MHz, compliance with the emission limits in Section 15.209 shall be demonstrated based on the average value of the measured emissions. The provisions in Section 15.35 apply to these measurements. Page 9 Rev.01 Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 3.5 DESCRIPTION OF TEST MODES The EUT (model: NA301-ZW-US) comes with four types of power adapter (model:
WA-12M12FU(V) / SYS-1381-1212-W2 / MU12AR120100-A1 (VI) / WA-12M12FU (VI)) for sale. After the preliminary test, the power adapter WA-12M12FU was found to emit the worst emissions and therefore had been tested under operating condition. Software used to control the EUT for staying in continuous transmitting mode was programmed. After verification, all tests were carried out with the worst case test modes as shown below except radiated spurious emission below 1GHz and power line conducted emissions below 30MHz, which worst case was in normal link mode. Page 10 Rev.01 Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 4. INSTRUMENT CALIBRATION 4.1 MEASURING INSTRUMENT CALIBRATION The measuring equipment, which was utilized in performing the tests documented herein, has been calibrated in accordance with the manufacturer's recommendations for utilizing calibration equipment, which is traceable to recognized national standards. 4.2 MEASUREMENT EQUIPMENT USED Equipment Used for Emissions Measurement Remark: Each piece of equipment is scheduled for calibration once a year and Loop Antenna is scheduled for calibration once three years. RF Conducted Test Site Name of Equipment Manufacturer Model Serial Number Cal. Date Cal. Due Power Meter Power Sensor Anritsu Anritsu MA2411B Spectrum Analyzer R&S FSV 40 ML2495A 1033009 04/11/2017 04/10/2018 917072 101073 07/03/2017 07/02/2018 10/02/2017 10/01/2018 Thermostatic/Hrgrosatic Chamber GWINSTEK GTC-288MH-CC TH160402 05/23/2017 05/22/2018 Directional Coupler Agilent 87301D MY44350252 07/25/2017 07/24/2018 SUCOFLEX Cable Divider HUBER SUHNER Solvang Technology SUCOFLEX 104PEA 25157 07/31/2017 07/30/2018 2-18GHz 4Way STI08-0015 07/26/2017 07/25/2018 Wugu 966 Chamber A Name of Equipment Manufacturer Model Serial Number Cal. Date Cal. Due Bilog Antenna Sunol Sciences JB3 A030105 06/20/2017 06/19/2018 Pre-Amplifier EMEC EM330 060609 06/07/2017 06/06/2018 Spectrum Analyzer Agilent E4446A US42510252 11/27/2017 11/26/2018 Antenna Tower Controller Turn Table Pre-Amplifier Software CCS CCS CCS HP CC-A-1F CC-C-1F CC-T-1F N/A N/A N/A N.C.R N.C.R N.C.R N.C.R N.C.R N.C.R 8449B 3008A00965 06/27/2017 06/26/2018 EZ-EMC (CCS-3A1RE) Remark:
1. Each piece of equipment is scheduled for calibration once a year and Precision Dipole is scheduled for calibration once three years. 2. N.C.R. = No Calibration Request. Page 11 Rev.01 Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 Conducted Emissions Test Site#B Name of Equipment Manufacturer Model Serial Number Cal. Date Cal. Due LISN LISN R&S ENV216 101054 05/18/2017 05/17/2018 SCHWARZBECK NSLK 8127 8127-541 02/14/2017 02/13/2018 EMI Test Receiver R&S ESCI 100064 05/17/2017 05/16/2018 SUCOFLEX Cable HUBER SUHNER SUCOFLEX 104PEA 25157 07/31/2017 07/30/2018 EMCI CABLE CFD300-NL FERF 07/03/2017 07/02/2018 Digital Thermo-Hygro Meter WISEWIND 1110 D03 02/24/2017 07/23/2018 Remark:
1. Each piece of equipment is scheduled for calibration once a year and Precision Dipole is scheduled for calibration once three years. 2. N.C.R. = No Calibration Request. 4.3 MEASUREMENT UNCERTAINTY PARAMETER UNCERTAINTY Powerline Conducted Emission 3M Semi Anechoic Chamber / 30M~200M 3M Semi Anechoic Chamber / 200M~1000M 3M Semi Anechoic Chamber / 1G~8G 3M Semi Anechoic Chamber / 8G~18G 3M Semi Anechoic Chamber / 18G~26G 3M Semi Anechoic Chamber / 26G~40G
+/- 1.2575
+/- 4.0138
+/- 3.9483
+/- 2.5975
+/- 2.6112
+/- 2.7389
+/- 2.9683 Remark: This uncertainty represents an expanded uncertainty expressed at approximately the 95%
confidence level using a coverage factor of k=2. Page 12 Rev.01 Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 5. FACILITIES AND ACCREDITATIONS 5.1 FACILITIES All measurement facilities used to collect the measurement data are located at No.199, Chunghsen Road, Hsintien City, Taipei Hsien, Taiwan, R.O.C. Tel: 886-2-2217-0894 / Fax: 886-2-2217-1029 No.11, Wugong 6th Rd., Wugu Dist., New Taipei City 24891, Taiwan. (R.O.C.) Tel: 886-2-2299-9720 / Fax: 886-2-2298-4045 The sites are constructed in conformance with the requirements of ANSI C63.7, ANSI C63.10: 2013 and CISPR Publication 22. 5.2 EQUIPMENT Radiated emissions are measured with one or more of the following types of linearly polarized antennas: tuned dipole, biconical, log periodic, bi-log, and/or ridged waveguide, horn. Spectrum analyzers with pre-selectors and quasi-peak detectors are used to perform radiated measurements. Conducted emissions are measured with Line Impedance Stabilization Networks and EMI Test Receivers. Calibrated wideband preamplifiers, coaxial cables, and coaxial attenuators are also used for making measurements. All receiving equipment conforms to CISPR Publication 16-1, Radio Interference Measuring Apparatus and Measurement Methods. Page 13 Rev.01 Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 6. SETUP OF EQUIPMENT UNDER TEST 6.1 SETUP CONFIGURATION OF EUT See test photographs attached in Appendix I for the actual connections between EUT and support equipment. 6.2 SUPPORT EQUIPMENT No Equipment Brand Model Series No. FCC ID Data Cable Power Cord 1. 2. USB 2.0 Storage Media SDCZ52-016G NB(G) IBM 1951 N/A N/A D33724 SanDisk N/A N/A N/A PD9LEN3945ABG Unshielded, 20m Unshielded, 1.8m Remark:
1. All the equipment/cables were placed in the worst-case configuration to maximize the emission during the test. 2. Grounding was established in accordance with the manufacturers requirements and conditions for the intended use. Page 14 Rev.01 Adaptor (EUT) AC Power 2 EUT 1 Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 7. FCC PART 15.249 REQUIREMENTS 7.1 OCCUPIED BANDWIDTH(99%) AND 6DB BANDWIDTH TEST LIMIT None; for reporting purposes only. Test Configuration EUT Spectrum Analyzer TEST PROCEDURE 1. Place the EUT on the table and set it in the transmitting mode. 2. Remove the antenna from the EUT and then connect a low loss RF cable from the antenna port to the spectrum analyzer. 3. Set the spectrum analyzer as RBW=100kHz, VBW = 300kHz, Span = 1MHz, Sweep
= auto. 4. Set the spectrum analyzer as OBW(99%) function 5. Mark the peak frequency and 6dB frequency. 6. Repeat until all the rest channels are investigated. TEST RESULTS Frequency 99% Bandwidth 6dB Bandwidth
(MHz) 916.0
(MHz) 0.0846
(MHz) 0.2055 Page 15 Rev.01 Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 Test Plot 99% Bandwidth 6dB Bandwidth Page 16 Rev.01 Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 7.2 SPURIOUS EMISSION 1. In the section 15.249(a):
Except as provided in paragraph (b) of this section, the field strength of emissions from intentional radiators operated within these frequency bands shall comply with the following:
Fundamental Frequency
(MHz) 902-928 MHz 2400 - 2483.5 MHz 5725 - 5875 MHz 24.0 - 24.25 GHz Field Strength of Fundamental Field Strength
(mV/m) 50 50 50 250 Field Strength of Harmonics
(V/m) 500 500 500 2500 2. Except as provided elsewhere in this Subpart, the emissions from an intentional radiator shall not exceed the field strength levels specified in the following table:
Frequency
(MHz) 30-88 88-216 216-960 Above 960 Field Strength
(V/m) 100*
150*
200*
500 Measurement Distance
(m) 3 3 3 3 Remark: Except as provided in paragraph (g), fundamental emissions from intentional radiators operating under this Section shall not be located in the frequency bands 54-72 MHz, 76-88 MHz, 174-216 MHz or 470-806 MHz. However, operation within these frequency bands is permitted under other sections of this Part, e.g., Sections 15.231 and 15.241. 3. In the above emission table, the tighter limit applies at the band edges. Frequency
(MHz) 30-88 88-216 216-960 Above 960 Field Strength
(V/m at 3-meter) Field Strength
(dBV/m at 3-meter) 100 150 200 500 40 43.5 46 54 Page 17 Rev.01 Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 Test Configuration 9kHz ~ 30MHz 30MHz ~ 1GHz Page 18 Rev.01 Spectrum / Receiver 3m 1m Turntable EUT 0.8m Loop antenna Reference ground plane Spectrum analyzer 3m 4m 1m Turntable EUT 0.8m Antenna tower Reference ground plane Bi-log antenna Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 Above 1 GHz Page 19 Rev.01 Spectrum analyzer Horn antenna 3m 4m 1m Turntable EUT 1.5m Antenna tower Pre-amp Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 TEST PROCEDURE 1. The EUT is placed on a turntable, Above 1 GHz is 1.5m high and below 1 GHz is 0.8m high above ground plane. 2. The turntable shall be rotated for 360 degrees to determine the position of maximum emission level. 3. EUT is set 3m away from the receiving antenna, which is varied from 1m to 4m to find out the highest emissions. 4. Maximum procedure was performed on the six highest emissions to ensure EUT compliance. 5. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. 6. Set the spectrum analyzer in the following setting as:
Below 30MHz RBW=10kHz / VBW=30kHz / Sweep=AUTO 30 ~ 1000MHz:
RBW=100kHz / VBW=300KHz / Sweep=AUTO Above 1GHz:
a) PEAK: RBW=1MHz / VBW=3MHz / Sweep=AUTO b) AVERAGE: RBW=1MHz / VBW=300Hz / Sweep=AUTO 7. Repeat above procedures until the measurements for all frequencies are complete. TEST RESULTS No non-compliance noted. Page 20 Rev.01 Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 Duty Cycle Duty Cycle (%) TX ON (ms) 1/T(KHz) 100%
1.0000
-
VBW 300Hz Notes: Duty cycle = TXon/TXall Page 21 Rev.01 Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 Field strength of fundamental frequency No. Frequency Reading Correct Result Limit Margin Remark 1 2
(MHz) 915.9800 915.9800
(dBuV) Factor(dB/m) 101.27 91.96
-1.75
-1.75
(dBuV/m)
(dBuV/m) 99.52 90.21 114.00 94.00
(dB)
-14.48
-3.79 peak AVG Page 22 Rev.01 Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 TEST DATA Below 1GHz Operation Mode:
Temperature:
Humidity:
916 MHz 24 33% RH Test Date:
Tested by:
Polarity:
December 6, 2017 Kevin Kuo Ver. Frequency
(MHz) Reading
(dBuV) 66.8600 50.98 115.3600 38.17 286.0800 32.53 341.3700 34.08 579.9900 37.47 915.6100 30.79 Remark:
Correction Factor
(dB/m)
-21.42
-15.82
-14.21
-13.17
-7.18
-1.75 Result Limit
(dBuV/m)
(dBuV/m) Margin
(dB) Remark 29.56 22.35 18.32 20.91 30.29 29.04 40.00 43.52 46.02 46.02 46.02 46.02
-10.44
-21.17
-27.70
-25.11
-15.73
-16.98 peak peak peak peak peak peak Ant.Pol.
(H/V) V V V V V V 1. No emission found between lowest internal used/generated frequency to 30MHz (9kHz~30MHz) 2. Radiated emissions measured in frequency range from 30 MHz to 1000MHz were made with an instrument using peak/quasi-peak detector mode. 3. Quasi-peak test would be performed if the peak result were greater than the quasi-peak limit or as required by the applicant. 4. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with N/A remark, if no specific emissions from the EUT are recorded (ie: margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. 5. Margin (dB) = Remark result (dBuV/m) Quasi-peak limit (dBuV/m). Page 23 Rev.01 Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 Operation Mode:
916MHz Temperature:
24 Humidity:
33 % RH Test Date:
Tested by:
Polarity:
December 6, 2017 Kevin Kuo Hor. Frequency
(MHz) Reading
(dBuV) 66.8600 85.2900 51.28 46.00 120.2100 35.74 579.9900 41.94 902.0300 30.63 915.6100 30.57 Correction Factor
(dB/m)
-21.42
-21.37
-15.01
-7.18
-1.98
-1.75 Remark:
Result Limit
(dBuV/m)
(dBuV/m) Margin
(dB) Remark 29.86 24.63 20.73 34.76 28.65 28.82 40.00 40.00 43.52 46.02 46.02 46.02
-10.14
-15.37
-22.79
-11.26
-17.37
-17.20 peak peak peak peak peak peak Ant.Pol.
(H/V) H H H H H H 1. No emission found between lowest internal used/generated frequency to 30MHz
(9kHz~30MHz) 2. Radiated emissions measured in frequency range from 30 MHz to 1000MHz were made with an instrument using peak/quasi-peak detector mode. 3. Quasi-peak test would be performed if the peak result were greater than the quasi-peak limit or as required by the applicant. 4. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with N/A remark, if no specific emissions from the EUT are recorded
(ie: margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. 5. Margin (dB) = Remark result (dBuV/m) Quasi-peak limit (dBuV/m). Page 24 Rev.01 Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 Above 1 GHz Operation Mode:
TX / 916MHz / 1G-10G Test Date: December 11, 2017 Temperature:
24 Humidity:
33 % RH Tested by: Kevin Kuo Polarity: Ver. Frequency
(MHz) Reading
(dBuV) Correction Result Limit
(dB/m)
(dBuV/m)
(dBuV/m) Margin
(dB) Remark Ant.Pol.
(H/V) 2748.000 40.29
-2.14 38.15 74.00
-35.85 peak V No 1 Remark:
1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Radiated emissions measured in frequency above 1000MHz were made with an instrument using peak/average detector mode. 3. Average test would be performed if the peak result were greater than the average limit . 4. Data of measurement within this frequency range shown --- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with N/A remark, if no specific emissions from the EUT are recorded (ie: margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. 6. Margin (dB) = Remark result (dBuV/m) Average limit (dBuV/m). Page 25 Rev.01 Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 TX / 916MHz / 1G-10G Test Date: December 11, 2017 Operation Mode:
Temperature:
24 Humidity:
33 % RH Tested by: Kevin Kuo Polarity: Hor. Frequency
(MHz) Reading
(dBuV) Correction Result Limit
(dB/m)
(dBuV/m)
(dBuV/m) Margin
(dB) Remark Ant.Pol.
(H/V) 2748.000 43.45
-2.14 41.31 74.00
-32.69 peak H No 1 Remark:
1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Radiated emissions measured in frequency above 1000MHz were made with an instrument using peak/average detector mode. 3. Average test would be performed if the peak result were greater than the average limit . 4. Data of measurement within this frequency range shown --- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with N/A remark, if no specific emissions from the EUT are recorded (ie: margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. 6. Margin (dB) = Remark result (dBuV/m) Average limit (dBuV/m). Page 26 Rev.01 Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 7.3 POWERLINE CONDUCTED EMISSIONS LIMIT According to 15.207(a), for an intentional radiator that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies within the band 150 kHz to 30 MHz shall not exceed the limits in the following table, as measured using a 50 H/50 ohms line impedance stabilization network (LISN). Compliance with the provisions of this paragraph shall be based on the measurement of the radio frequency voltage between each power line and ground at the power terminal. The lower limit applies at the boundary between the frequency ranges. Frequency Range
(MHz) 0.15 to 0.50 0.50 to 5 5 to 30 Limits
(dBV) Quasi-peak 66 to 56*
56 60 Average 56 to 46*
46 50
* Decreases with the logarithm of the frequency. Test Configuration See test photographs attached in Appendix I for the actual connections between EUT and support equipment. TEST PROCEDURE 1. The EUT was placed on a table, which is 0.8m above ground plane. 2. Maximum procedure was performed on the six highest emissions to ensure EUT compliance. 3. Repeat above procedures until all frequency measured were complete. TEST RESULTS The initial step in collecting conducted data is a spectrum analyzer peak scan of the measurement range. Significant peaks are then marked as shown on the following data page, and these signals are then quasi-peaked. Page 27 Rev.01 Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 TEST RESULTS Test Data Operation Mode:
Normal Link Test Date:
December 12, 2017 Temperature:
24C Tested by:
Eric Lee Humidity:
50% RH Freq.
(MHz) QP AV Reading
(dBuV) Reading
(dBuV) Corr. factor
(dB/m) QP AV Result
(dBuV/m Result
(dBuV/m QP Limit
(dBuV) AV Limit
(dBuV)
)
) QP AV Margin Margin Note
(dB)
(dB) 0.1660 42.41 35.48 0.05 42.46 35.53 65.16 55.16
-22.70
-19.63 0.3540 40.92 32.02 0.05 40.97 32.07 58.87 48.87
-17.90
-16.80 0.4820 34.09 17.91 0.05 34.14 17.96 56.30 46.30
-22.16
-28.34 0.8540 30.16 19.65 0.07 30.23 19.72 56.00 46.00
-25.77
-26.28 1.2300 28.06 15.79 0.07 28.13 15.86 56.00 46.00
-27.87
-30.14 4.7940 26.21 14.97 0.10 26.31 15.07 56.00 46.00
-29.69
-30.93 0.1580 36.02 25.98 0.12 36.14 26.10 65.57 55.57
-29.43
-29.47 0.2100 32.63 18.59 0.12 32.75 18.71 63.21 53.21
-30.46
-34.50 0.3500 37.34 29.97 0.13 37.47 30.10 58.96 48.96
-21.49
-18.86 0.4860 27.86 14.52 0.13 27.99 14.65 56.24 46.24
-28.25
-31.59 4.7660 20.84 10.18 0.23 21.07 10.41 56.00 46.00
-34.93
-35.59 11.9460 15.80 11.27 0.37 16.17 11.64 60.00 50.00
-43.83
-38.36 L1 L1 L1 L1 L1 L1 L2 L2 L2 L2 L2 L2 Remark:
1. Measuring frequencies from 0.15 MHz to 30MHz. 2. The emissions measured in frequency range from 0.15 MHz to 30MHz were made with an instrument using Quasi-peak detector and average detector. 3. The IF bandwidth of SPA between 0.15MHz to 30MHz was 10kHz; the IF bandwidth of Test Receiver between 0.15MHz to 30MHz was 9kHz;
4. L1 = Line One (Live Line) / L2 = Line Two (Neutral Line) Page 28 Rev.01 Compliance Certification Services Inc. FCC ID: P27NA301ZW Report No.: T171130D01-RP3 Test Plots Conducted emissions (Line 1) Conducted emissions (Line 2) Page 29 Rev.01
1 2 3 | Agents Letter | Cover Letter(s) | 50.79 KiB | August 28 2014 |
DateAugust 25, 2014 BABT TCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, Sercomm Corporation hereby authorize Compliance Certification Services Inc / James Chan to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. This authorization expires on 2015/2/25 Yours Sincerely, Kevin Kuo Sr. Manager / R&D Division Sercomm Corporation TEL: 886-2-2655-3988#2631 FAX: 886-2-2655-7379 E-Mail: kevin_kuo@sercomm.com
1 2 3 | DoC Attestation | Attestation Statements | 51.04 KiB | August 28 2014 |
DateAugust 25, 2014 Subject: DoC declaration To whom it may concern, We, as the grantee of this project FCC ID: P27NA301ZW, would like to declare that the composite Portion categorized as computer peripheral has been authorized under the Declaration of Conformity procedures. Brand Name & Model Name of the specified radio equipment:
Sercomm; MiOS Limited / Vera Control, Ltd. / NA301-ZWxxxxxxxx ; G150xxxxxxxx ; Edgexxxxxxxx (The x in model name can be 0 to 9, A to Z, blank or - , for marking purpose) FCC ID: P27NA301ZW Product Name: Smart Home Gateway Regards, Yours Sincerely, Kevin Kuo Sr. Manager / R&D Division Sercomm Corporation TEL: 886-2-2655-3988#2631 FAX: 886-2-2655-7379 E-Mail: kevin_kuo@sercomm.com
1 2 3 | Model Difference Letter | Cover Letter(s) | 67.55 KiB | August 28 2014 |
DateAugust 26, 2014 BABT FCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, Due to the business consideration, we hereby declare that our product of Smart Home Gateway Model: 1) NA301-ZWxxxxxxxx ; G150xxxxxxxx ; Edgexxxxxxxx (The x in model name can be 0 to 9, A to Z, blank or -
, for marking purpose) have as following difference for all the specification and layout are identical except they come with different model number for marketing purposes. Any questions regarding this declaration, please dont hesitate to contact us. Your Sincerely, Kevin Kuo Sr. Manager / R&D Division Sercomm Corporation TEL: 886-2-2655-3988#2631 FAX: 886-2-2655-7379 E-Mail: kevin_kuo@sercomm.com
1 2 3 | RF Exposure Report | RF Exposure Info | 161.83 KiB | August 28 2014 |
Compliance Certification Services Inc. Report No.: T140708D15-MF Date of Issue: August 25, 2014 APPENDIX I RADIO FREQUENCY EXPOSURE LIMIT According to 15.247(i), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See 1.1307(b)(1) of this chapter. EUT Specification EUT Model Frequency band
(Operating) Device category Exposure classification Antenna Specification Maximum Average output power Maximum Tune up Power Smart Home Gateway NA301-ZWxxxxxxxx / G150xxxxxxxx / Edgexxxxxxxx (The x in model name can be 0 to 9, A to Z, blank or - , for marking purpose) 802.11b/g/n HT20: 2.412GHz ~ 2.462GHz 802.11n HT40: 2.422GHz ~ 2.452GHz Others Portable (<20cm separation) Mobile (>20cm separation) Others Occupational/Controlled exposure (S = 5mW/cm2) General Population/Uncontrolled exposure
(S=1mW/cm2) Evaluation applied MPE Evaluation*
SAR Evaluation N/A This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 1 Rev.00 2.4GHz: Antenna Gain :4.99 dBi(Numeric gain:3.16)IEEE 802.11b Mode:17.99 dBm(62.951 mW)IEEE 802.11g Mode:16.64 dBm(46.132 mW)IEEE 802.11n HT 20 Mode: 13.89 dBm(24.491 mW)IEEE 802.11n HT 40 Mode: 14.36 dBm(27.290 mW)IEEE 802.11b Mode:18.00 dBm(63.096 mW)IEEE 802.11g Mode:18.00 dBm(63.096 mW)IEEE 802.11n HT 20 Mode: 18.00 dBm(63.096 mW)IEEE 802.11n HT 40 Mode: 18.00 dBm(63.096 mW) Compliance Certification Services Inc. Report No.: T140708D15-MF Date of Issue: August 25, 2014 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 2014/08/22 Initial Issue ALL Angel Cheng This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 2 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-MF Date of Issue: August 25, 2014 TEST RESULTS No non-compliance noted. Calculation Given
&
Where E = Field strength in Volts / meter P = Power in Watts G = Numeric antenna gain d = Distance in meters S = Power density in milliwatts / square centimeter Combining equations and re-arranging the terms to express the distance as a function of the remaining variables yields:
Changing to units of mW and cm, using:
Yields P (mW) = P (W) / 1000 and d (cm) = d(m) / 100 Equation 1 Where d = Distance in cm P = Power in mW G = Numeric antenna gain S = Power density in mW / cm2 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 3 Rev.00 dGPE303772ES237730dGPS220796.0100/3771000/30dGPdGPS Compliance Certification Services Inc. Report No.: T140708D15-MF Date of Issue: August 25, 2014 Maximum Permissible Exposure Substituting the MPE safe distance using d = 20 cm into Equation 1:
Where P = Power in mW G = Numeric antenna gain S = Power density in mW / cm2 IEEE 802.11b mode:
IEEE 802.11g mode:
IEEE 802.11n HT20 mode:
IEEE 802.11n HT40 mode:
This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 4 Rev.00 GPS000199.0Ch.Frq.(MHz)P (mW)Gain (num.)D (cm)Power density in mW / cm2Limit (mW/cm2)1241263.0963.16200.03971Ch.Frq.(MHz)P (mW)Gain (num.)D (cm)Power density in mW / cm2Limit (mW/cm2)1241263.0963.16200.03971Ch.Frq.(MHz)P (mW)Gain (num.)D (cm)Power density in mW / cm2Limit (mW/cm2)1241263.0963.16200.03971Ch.Frq.(MHz)P (mW)Gain (num.)D (cm)Power density in mW / cm2Limit (mW/cm2)3242263.0963.16200.03971
1 2 3 | Test Report | Test Report | 3.23 MiB | August 28 2014 |
Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 FCC 47 CFR PART 15 SUBPART C TEST REPORT For Smart Home Gateway Model: NA301-ZWxxxxxxxx; G150xxxxxxxx; Edgexxxxxxxx (The x in model name can be 0 to 9, A to Z, blank or - , for marking purpose) Trade Name: Sercomm; MiOS Limited; Vera Control, Ltd. 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. Sercomm Corporation Issued to Issued by Compliance Certification Services Inc. No.81-1, Lane 210, Bade 2nd Rd., LujhuTownship, TaoyuanCounty 33841, Taiwan, R.O.C. TEL: 886-3-324-0332 FAX: 886-3-324-5235 http://www.ccsrf.com service@ccsrf.com Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, A2LA, NIST or any government agencies. The test results in the report only apply to the tested sample. Page 1 / 96 Rev.00 Rev. 00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Issue Date August 18, 2014 Revision History Revisions Effect Page Revised By Initial Issue ALL Landy Huang This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 2 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION ...........................................................................................4 2. EUT DESCRIPTION................................................................................................................5 3. TEST METHODOLOGY..........................................................................................................6 3.1 EUT CONFIGURATION ......................................................................................................6 3.2 EUT EXERCISE ..................................................................................................................6 3.3 GENERAL TEST PROCEDURES .......................................................................................6 3.4 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS............................................7 3.5 DESCRIPTION OF TEST MODES ......................................................................................8 4. INSTRUMENT CALIBRATION ...............................................................................................9 4.1 MEASURING INSTRUMENT CALIBRATION......................................................................9 4.2 MEASUREMENT EQUIPMENT USED................................................................................9 4.3 MEASUREMENT UNCERTAINTY ....................................................................................10 5. FACILITIES AND ACCREDITATIONS.................................................................................11 5.1 FACILTIES ........................................................................................................................11 5.2 EQUIPMENT .....................................................................................................................11 5.3 TABLE OF ACCREDITATIONS AND LISTINGS ...............................................................12 6. SETUP OF EQUIPMENT UNDER TEST ..............................................................................13 6.1 SETUP CONFIGURATION OF EUT..................................................................................13 6.2 SUPPORT EQUIPMENT...................................................................................................13 7. FCC PART 15.247 REQUIREMENTS ..................................................................................14 7.1 6DB BANDWIDTH .............................................................................................................14 7.2 PEAK POWER...................................................................................................................25 7.3 AVERAGE POWER...........................................................................................................27 7.4 BAND EDGES MEASUREMENT ......................................................................................29 7.5 PEAK POWER SPECTRAL DENSITY ..............................................................................46 7.6 SPURIOUS EMISSIONS...................................................................................................57 7.7 POWERLINE CONDUCTED EMISSIONS ........................................................................89 8. APPENDIX I PHOTOGRAPHS OF TEST SETUP................................................................92 9. APPENDIX 1: PHOTOGRAPHS OF EUT.............................................................................96 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 3 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Applicant:
1. TEST RESULT CERTIFICATION Sercomm Corporation 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. Sercomm Corporation 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. Manufacturer:
Equipment Under Test: Smart Home Gateway Trade Name:
Model:
Sercomm; MiOS Limited; Vera Control, Ltd. NA301-ZWxxxxxxxx; G150xxxxxxxx; Edgexxxxxxxx (The x in model name can be 0 to 9, A to Z, blank or - , for marking purpose) July 24 ~ August 11, 2014 Date of Test:
APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR Part 15 Subpart C No non-compliance noted We hereby certify that:
The above equipment was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 and the energy emitted by the sample EUT tested as described in this report is in compliance with the requirements of FCC Rules Part 15.207, 15.209, 15.247. The test results of this report relate only to the tested sample EUT identified in this report. Approved by:
Bill Cheng Section Manager Reviewed by:
Angel Hu Section Manager This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 4 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 2. EUT DESCRIPTION Product Smart Home Gateway Trade Name Model Number Model Discrepancy EUT Power Rating Power Adapter Power Adapter Rating Sercomm; MiOS Limited; Vera Control, Ltd. NA301-ZWxxxxxxxx; G150xxxxxxxx; Edgexxxxxxxx (The x in model name can be 0 to 9, A to Z, blank or - , for marking purpose) 1. All the model numbers (list on this report) are identical, just formarketing purpose only except Brand. Model Number Brand Sercomm MiOS Limited Vera Control, Ltd. NA301-ZWxxxxxxxx (The x in model name can be 0 to 9, A to Z, blank or - , for marking purpose) G150xxxxxxxx (The x in model name can be 0 to 9, A to Z, blank or - , for marking purpose) Edgexxxxxxxx (The x in model name can be 0 to 9, A to Z, blank or - , for marking purpose) 2. The means of x (The x in model name can be 0 to 9, A to Z, blank or - , for marking purpose) on model number are identical, just for marketing purpose only. 3. Client consigns only one model sample (Model number:
NA301-ZW-US) to test. Therefore testing Lab. just guarantees the units, which have been tested. 12VDC, 1.0A Asia power Device Inc. Sunny I/P: 100-240VAC, 50/60HZ, 0.5A O/P: 12VDC, 1.0A SYS-1381-1212-W2 WA-12M12FU Model Model RF Module Manufacturer MEDIATEK Operating Frequency Range Model MT7620A IEEE 802.11 b/g/HT20 mode: 2412 ~ 2462 MHz IEEE 802.11 HT40 mode: 2422 ~ 2452 MHz IEEE 802.11b mode: 20.49dBm (0.01119W) IEEE 802.11g mode: 22.73dBm (0.1875W) IEEE 802.11n HT20 mode: 24.97dBm(0.3137W) IEEE 802.11n HT40 mode: 25.00dBm (0.3164W) IEEE 802.11b mode: DSSS (11, 5.5, 2, 1 Mbps) IEEE 802.11g mode: OFDM (54, 48, 36, 24, 18, 12, 11, 9, 6 Mbps) IEEE 802.11n HT20 mode: OFDM (6.5, 13, 19.5, 26, 39, 52, 58.5, 65, 78, 104, 117, 130 Mbps) IEEE 802.11n HT40 mode: OFDM (13.5, 27, 40.5, 54, 81, 108, 121.5, 135, 162, 216, 243, 270 Mbps) Chain 0: Monopole Antenna / Gain: 3.62dBi ( For IEEE 802.11b/g) Chain 1: PCB Antenna / Gain: 4.99dBi( For IEEE 802.11b/g) MIMO: 10log[(103.62/20+104.99/20)2/2]=7.34) ( For IEEE 802.11n) Transmit Power Modulation Technique Antenna Specification Remark:
1. The sample selected for test was production product and was provided by manufacturer. 2. This submittal(s) (test report) is intended for FCC ID: P27NA301ZW filing to comply with Section 15.207, 15.209 and 15.247 of the FCC Part 15, Subpart C Rules. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 5 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 3. TEST METHODOLOGY The tests documented in this report were performed in accordance with ANSI C63.4 and FCC CFR 47 Part 2, Part 15.207, 15.209 and 15.247. 3.1 EUT CONFIGURATION The EUT configuration for testing is installed on RF field strength measurement to meet the Commissions requirement and operating in a manner that intends to maximize its emission characteristics in a continuous normal application. 3.2 EUT EXERCISE The EUT was operated in the engineering mode to fix the TX frequency that was for the purpose of the measurements. According to its specifications, the EUT must comply with the requirements of the Section 15.207, 15.209 and 15.247 under the FCC Rules Part 15 Subpart C. 3.3 GENERAL TEST PROCEDURES Conducted Emissions The EUT is placed on the turntable, which is 0.8 m above ground plane. According to the requirements in Section 13.1.4.1 of ANSI C63.4 Conducted emissions from the EUT measured in the frequency range between 0.15 MHz and 30MHz using CISPR Quasi-peak and average detector modes. Radiated Emissions The EUT is placed on a turn table, which is 0.8 m above ground plane. The turntable shall rotate 360 degrees to determine the position of maximum emission level. EUT is set 3m away from the receiving antenna, which varied from 1m to 4m to find out the highest emission. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. In order to find out the maximum emissions, exploratory radiated emission measurements were made according to the requirements in Section 13.1.4.1 of ANSI C63.4. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 6 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 3.4 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS
(a) Except as shown in paragraph (d) of this section, only spurious emissions are permitted in any of the frequency bands listed below:
MHz MHz MHz GHz 0.090 - 0.110 10.495 - 0.505 2.1735 - 2.1905 4.125 - 4.128 4.17725 - 4.17775 4.20725 - 4.20775 6.215 - 6.218 6.26775 - 6.26825 6.31175 - 6.31225 8.291 - 8.294 8.362 - 8.366 8.37625 - 8.38675 8.41425 - 8.41475 12.29 - 12.293 12.51975 - 12.52025 12.57675 - 12.57725 16.42 - 16.423 16.69475 - 16.69525 16.80425 - 16.80475 25.5 - 25.67 37.5 - 38.25 73 - 74.6 74.8 - 75.2 108 - 121.94 123 - 138 149.9 - 150.05 156.52475 -
156.52525 156.7 - 156.9 162.0125 - 167.17 167.72 - 173.2 240 - 285 322 - 335.4 399.9 - 410 608 - 614 960 - 1240 1300 - 1427 1435 - 1626.5 1645.5 - 1646.5 1660 - 1710 1718.8 - 1722.2 2200 - 2300 2310 - 2390 2483.5 - 2500 2655 - 2900 3260 - 3267 3332 - 3339 3345.8 - 3358 3600 - 4400 4.5 - 5.15 5.35 - 5.46 7.25 - 7.75 8.025 - 8.5 9.0 - 9.2 9.3 - 9.5 10.6 - 12.7 13.25 - 13.4 14.47 - 14.5 15.35 - 16.2 17.7 - 21.4 22.01 - 23.12 23.6 - 24.0 31.2 - 31.8 36.43 - 36.5
(2) 13.36 - 13.41 1 Until February 1, 1999, this restricted band shall be 0.490-0.510 MHz. 2 Above 38.6
(b) Except as provided in paragraphs (d) and (e), the field strength of emissions appearing within these frequency bands shall not exceed the limits shown in Section 15.209. At frequencies equal to or less than 1000 MHz, compliance with the limits in Section 15.209 shall be demonstrated using measurement instrumentation employing a CISPR quasi-peak detector. Above 1000 MHz, compliance with the emission limits in Section 15.209 shall be demonstrated based on the average value of the measured emissions. The provisions in Section 15.35 apply to these measurements. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 7 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 3.5 DESCRIPTION OF TEST MODES The EUT is a 2Tx2R MIMO transmitter. The EUT (model: NA301-ZW-US) had been tested under operating condition and had been reported as worst case on this test report. Software used to control the EUT for staying in continuous transmitting mode was programmed. After verification, all tests were carried out with the worst case test modes as shown below except radiated spurious emission below 1GHz and power line conducted emissions below 30MHz, which worst case was in normal link mode. WA-12M12FU & SYS-1381-1212-W2 have been pre-scanned during the test, and the model WA-12M12FU was selected as the worst case for final test. IEEE 802.11b:
Channel Low (2412MHz), Channel Mid (2437MHz) and Channel High (2462MHz) with 1Mbps data rate was chosen for full testing. IEEE 802.11g:
Channel Low (2412MHz), Channel Mid (2437MHz) and Channel High (2462MHz) with 6Mbps data rate was chosen for full testing. IEEE 802.11n HT20:
Channel Low (2412MHz), Channel Mid (2437MHz) and Channel High (2462MHz) with 6.5Mbps data rate were chosen for full testing. IEEE 802.11n HT40:
Channel Low (2422MHz), Channel Mid (2437MHz) and Channel High (2452MHz) with 13.5Mbps data rate were chosen for full testing. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 8 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 4. INSTRUMENT CALIBRATION 4.1 MEASURING INSTRUMENT CALIBRATION The measuring equipment, which was utilized in performing the tests documented herein, has been calibrated in accordance with the manufacturer's recommendations for utilizing calibration equipment, which is traceable to recognized national standards. 4.2 MEASUREMENT EQUIPMENT USED Equipment Used for Emissions Measurement Conducted Emissions Test Site Agilent Agilent R&S Anritsu Anritsu Agilent R&S HP EMEC MITEQ Agilent Name of Equipment Manufacturer Spectrum Analyzer Spectrum Analyzer Spectrum Analyzer Power meter Power Sensor Model E4446A N9010A FSL ML2495A MA2411B Serial Number Calibration Due MY48250064 MY52220817 100837 1033009 0917221 100837 2944A06530 060570 985646 3008A01738 430 8905-2356 35378 00022250 00026370 N/A N/A 01/01/2015 03/20/2015 11/11/2014 09/29/2014 09/29/2014 01/01/2015 11/11/2014 05/02/2015 07/28/2015 06/12/2015 08/11/2015 03/30/2015 08/20/2014 09/11/2014 08/05/2015 12/29/2014 N.C.R N.C.R Name of Equipment Manufacturer Spectrum Analyzer Spectrum Analyzer 3MSemi Anechoic Chamber Serial Number Calibration Due MY48250064 Pre-Amplifier Pre-Amplifier Pre-Amplifier Pre-Amplifier Model E4446A FSL 8447D EM01M26G AMF-6F-260400-4 0-8P 8449B EMI Test Receiver SCHAFFNER SCR 3501 Loop Antenna Bilog Antenna Horn Antenna Horn Antenna Antenna Tower Turn Table Test S/W EMCO TESEQ EMCO EMCO CCS CCS 6502 CBL 6112D 3115 3116 CC-A-1F CC-T-1F EZ-EMC NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. N.C.R = No Calibration Request. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 9 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Powerline Conducted Emissions Test Site#3 Name of Equipment Manufacturer EMI Test Receiver LISN LISN ISN R&S R&S FCC TESEQ Current Probe ISN Test S/W FCC FCC Model ESCI ENV216 FCC-LISN-50/250-
16-2-07 ISN-T8 F-35 FCC-TLISN-T2-02 Serial Number Calibration Due 101300 100069 06013 30842 506 20587 09/06/2014 06/09/2015 11/20/2014 07/30/2015 07/13/2015 07/28/2015 EZ-EMC NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. N.C.R = No Calibration Request. 4.3 MEASUREMENT UNCERTAINTY Parameter Uncertainty Powerline Conducted Emission #3 3M Semi Anechoic Chamber / 30MHz ~ 200MHz 3M Semi Anechoic Chamber / 200MHz ~ 1GHz 3M Semi Anechoic Chamber / 1 ~ 8GHz 3M Semi Anechoic Chamber / 8 ~ 18GHz 3M Semi Anechoic Chamber / 18 ~ 26GHz 3M Semi Anechoic Chamber / 26 ~ 40GHz 2.1876 3.5921 3.5657 2.5873 2.6646 2.9617 3.4250 Remark: This uncertainty represents an expanded uncertainty expressed at approximately the 95%
confidence levelusing a coverage factor of k=2. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 10 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 5. FACILITIES AND ACCREDITATIONS 5.1 FACILTIES All measurement facilities used to collect the measurement data are located at No. 163-1, Jhongsheng Rd., Sindien District, Taipei City23151, Taiwan No 11, Wugong 6th Rd, Wugu District, New Taipei City 24891, Taiwan (R.O.C) Tel: 886-2-2299-9720 / Fax:886-2-2298-4045 No.81-1, Lane 210, Bade 2nd Rd., Lujhu Township,Taoyuan County 33841,Taiwan, R.O.C. Tel: 886-3-324-0332 / Fax: 886-3-324-5235 The sites are constructed in conformance with the requirements of ANSI C63.7, ANSI C63.4 and CISPR Publication 22. 5.2 EQUIPMENT Radiated emissions are measured with one or more of the following types of linearly polarized antennas: tuned dipole, biconical, log periodic, bi-log, and/or ridged waveguide, horn. Spectrum analyzers with pre-selectors and quasi-peak detectors are used to perform radiated measurements. Conducted emissions are measured with Line Impedance Stabilization Networks and EMI Test Receivers. Calibrated wideband preamplifiers, coaxial cables, and coaxial attenuators are also used for making measurements. All receiving equipment conforms to CISPR Publication 16-1, Radio Interference Measuring Apparatus and Measurement Methods. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 11 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 5.3 TABLE OF ACCREDITATIONS AND LISTINGS Country Agency Scope of Accreditation Logo USA A2LA CFR 47, FCC Part15/18, CISPR 22, EN 55022, ICES-003, AS/NZS CISPR 22, VCCI V-3, EN 55011, CISPR 11, IEC/EN 61000-4-2/3/4/5/6/8/11, EN 61000-6-1/2/3/4, EN 55024, CISPR 24, AS/NZS CISPR 24, AS/NZS 61000.6.2, EN 55014-1/-2, ETSI EN 300 386 v1.3.2/v1.3.3, IEC/EN 61000-3-2, AS/NZS 61000.3.2, IEC/EN 61000-3-3, AS/NZS 61000.3.3 USA FCC MRA 3 meter Open Area Test Sites to perform FCC Part 15/18 measurements TW1026 Japan VCCI 3/10 meter Open Area Test Sites and conducted test sites to perform radiated/conducted measurements R-2882/2541/2798/725/1868 C-402/747/912 T-1930/1646 Taiwan TAF EN 55014-1, CISPR 14, CNS 13781-1, EN 55013, CISPR 13, CNS 13439, EN 55011, CISPR 11, CNS 13803, PLMN09, IS2045-0, LP0002 FCC Part 27/90, Part 15B/C/D/E, RSS-192/193/210/310 ETSI EN 300 328/ 300 220-1/ 300 220-2/ 301 893/ 301 489-01/ 301 489-03/ 301 489-07 /
301 489-17/ 300 440-1/ 300 440-2 AS/NZS 4268, AS/NZS 4771 CISPR 22, EN 55022, CNS 13438, AS/NZS CISPR 22, VCCI, IEC/EN 61000-4-2/3/4/5/6/8/11, CNS 14676-2/3/4/5/6/8, CNS 14934-2/3, CNS 13783-1, CNS 13439, CNS 13803 Taiwan BSMI CNS 13438, CNS 13783-1, CNS 13439, CNS 14115 Canada Industry Canada RSS-Gen Issue 3 SL2-IS-E-0014 / IN-E-0014
/A1-E-0014 /R1-E-0014
/R2-E-0014 /L1-E-0014 IC 2324C-5 Note:No part of this report may be used to claim or imply product endorsement by A2LA, TAF or other government agency. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 12 Rev.00 1. 2. Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 6. SETUP OF EQUIPMENT UNDER TEST 6.1 SETUP CONFIGURATION OF EUT See test photographs attached in Appendix 1 for the actual connections between EUT and support equipment. 6.2 SUPPORT EQUIPMENT For Radiated Emission (Below 1GHz) and Power line conducted emission measurement:
No. Power Cord Series No. Device Type Traveling Disk LuxMini 720 Model N/A FCC ID FCC DoC Data Cable Brand SILICON POWER Shielded,1.8m Notebook PC
(Remote) 1706-A78 LV-L1870 06/09 FCC DOC IBM LAN Cable:
Unshielded,10m 3. Notebook PC
(Remote) ThinkPad T430u PB-VZLGG 12/09 FCC DOC LENOVO N/A N/A AC I/P:
Unshielded,1.8m DC O/P:
Shielded,1.8m AC I/P:
Unshielded,1.8m DC O/P:
Unshielded,1.8m with a core For Radiated Emission (Above 1GHz) measurement:
No. Device Type Series No. Model N/A FCC ID Brand Data Cable Power Cord For Conducted emission measurement:
No. Device Type Model Series No. FCC ID Brand Data Cable 1. Notebook PC D400 0932RY E2K24GBRL DELL LAN Cable:
Unshielded,10m Power Cord AC I/P:
Unshielded,1.8m DC O/P:
Unshielded,1.8m with a core Remark: Grounding was established in accordance with the manufacturers requirements and conditions for the intended use. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 13 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 7. FCC PART 15.247 REQUIREMENTS 7.1 6dB BANDWIDTH LIMIT According to 15.247(a)(2), systems using digital modulation techniques may operate in the 902 - 928 MHz,2400 - 2483.5 MHz, and 5725 - 5850 MHz bands. The minimum 6 dB bandwidth shall be at least 500 kHz. TEST CONFIGURATION EUT Spectrum Analyzer TEST PROCEDURE 1. Place the EUT on the table and set it in the transmitting mode. 2. Remove the antenna from the EUT and then connect a low loss RF cable from the antenna port to the spectrum analyzer. 3. Set the spectrum analyzer as RBW = 100kHz, VBW = 300kHz, Span = 30MHz or 50MHz, Sweep = auto. 4. Mark the peak frequency and 6dB (upper and lower) frequency. 5. Repeat until all the rest channels are investigated. TEST RESULTS No non-compliance noted This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 14 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 TEST DATA Test mode: IEEE 802.11b mode Channel Low Mid High Frequency
(MHz) Bandwidth(MHz) 2412 2437 2462 10.17 10.17 10.17 Test mode: IEEE 802.11g mode Channel Low Mid High Frequency
(MHz) Bandwidth(MHz) 2412 2437 2462 16.65 16.62 16.65 Test mode: IEEE 802.11n HT20 mode Limit
(kHz)
>500 Limit
(kHz)
>500 Result PASS PASS PASS Result PASS PASS PASS Channel Low Mid High Frequency
(MHz) 2412 2437 2462 Bandwidth(MHz) Chain 0 17.82 17.82 17.85 Chain 1 17.82 17.76 17.79 Test mode: IEEE 802.11n HT40 mode Channel Low Mid High Frequency
(MHz) 2422 2437 2452 Bandwidth(MHz) Chain 0 36.60 36.60 36.60 Chain 1 36.60 36.55 36.60 Limit
(kHz)
>500 Limit
(kHz)
>500 Result PASS PASS PASS Result PASS PASS PASS This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 15 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Test Plot IEEE 802.11b mode 6dB Bandwidth (CH Low) 6dB Bandwidth (CH Mid) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 16 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 6dB Bandwidth (CH High) IEEE 802.11g mode 6dB Bandwidth (CH Low) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 17 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 6dB Bandwidth (CH Mid) 6dB Bandwidth (CH High) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 18 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 IEEE 802.11n HT20 mode / Chain 0 6dB Bandwidth (CH Low) 6dB Bandwidth (CH Mid) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 19 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 6dB Bandwidth (CH High) IEEE 802.11n HT20 mode / Chain 1 6dB Bandwidth (CH Low) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 20 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 6dB Bandwidth (CH Mid) 6dB Bandwidth (CH High) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 21 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 IEEE 802.11n HT40 mode / Chain 0 6dB Bandwidth (CH Low) 6dB Bandwidth (CH Mid) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 22 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 6dB Bandwidth (CH High) IEEE 802.11n HT40 mode / Chain 1 6dB Bandwidth (CH Low) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 23 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 6dB Bandwidth (CH Mid) 6dB Bandwidth (CH High) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 24 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 7.2 PEAK POWER LIMIT The maximum peak output power of the intentional radiator shall not exceed the following:
1. According to 15.247(b)(3), for systems using digital modulation in the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz: 1 Watt. 2. According to 15.247(b)(4), the conducted output power limit specified in paragraph (b) of this section is based on the use of antennas with directional gains that do not exceed 6 dBi. Except as shown in paragraph (c) of this section, if transmitting antennas of directional gain greater than 6 dBi are used, the conducted output power from the intentional radiator shall be reduced below the stated values in paragraphs (b)(1), (b)(2), and (b)(3) of this section, as appropriate, by the amount in dB that the directional gain of the antenna exceeds 6 dBi. TEST CONFIGURATION EUT Power Meter TEST PROCEDURE Per KDB 558074v03r01 The transmitter output is connected to the Power Meter. The Power Meter is set to the peak power detection. TEST RESULTS No non-compliance noted This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 25 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 TEST DATA Test mode: IEEE 802.11b mode Channel Low Mid High Frequency
(MHz) 2412 2437 2462 Output Power
(dBm) 20.49 20.28 20.32 Test mode: IEEE 802.11g mode Frequency Output Power Channel Low Mid High
(MHz) 2412 2437 2462
(dBm) 22.48 22.73 19.58 Test mode: IEEE 802.11n HT20 mode Output Power Frequency
(dBm) Output Power
(W) 0.1119 0.1067 0.1076 Output Power
(W) 0.1770 0.1875 0.0908 Limit
(W) 1 Limit
(W) 1 Output Power
(W) Test Result PASS PASS PASS Test Result PASS PASS PASS Limit
(W) Result PASS PASS PASS PASS PASS Channel Low Mid High
(MHz) 2412 2437 2462 Chain 0 Chain 1 Total Chain 0 Chain 1 Total 0.1442 0.1062 0.2504 21.59 23.99 20.26 21.04 20.58 22.71 20.32 24.97 0.1271 0.1866 0.3137 0.7345 23.46 0.1143 0.1076 0.2219 Test mode: IEEE 802.11n HT40 mode Frequency Channel
(MHz) 2422 2437 Low Mid Output Power
(dBm) Output Power
(W) Chain 0 Chain 1 Total Chain 0 Chain 1 Total 21.07 0.1279 0.1216 0.2496 23.97 20.85 Limit
(W) Result 21.43 22.49 25.00 0.1390 0.1774 0.3164 0.7345 2452 20.09 High Remark:
1. Total Output Power (w) = Chain 0 (10^(Output Power /10)/1000) + Chain 1 (10^(Output Power /10)/1000)) 2. The maximum antenna gain is 7.34dBi; therefore the reduction due to antenna gain is 1.34dBi, so the limit is 28.66dBm(0.7345W). 0.1021 0.0504 0.1524 17.02 21.83 PASS This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 26 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 7.3 AVERAGE POWER LIMIT None; for reporting purposes only. TEST CONFIGURATION EUT Power Meter TEST PROCEDURE Per KDB 558074 v03r01 The transmitter output is connected to the Power Meter. The Power Meter is set to the average power detection. TEST RESULTS No non-compliance noted This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 27 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 TEST DATA Test mode: IEEE 802.11b mode Channel Low Mid High Frequency
(MHz) 2412 2437 2462 Output Power
(dBm) 17.99 17.49 17.14 Test mode: IEEE 802.11g mode Channel Low Mid High Frequency
(MHz) 2412 2437 2462 Output Power
(dBm) 16.64 16.28 12.35 Test mode: IEEE 802.11n HT20 mode Output Power
(W) 0.0630 0.0561 0.0518 Output Power
(W) 0.0461 0.0425 0.0172 Frequency Channel Output Power
(dBm) Output Power
(W)
(MHz) 2412 2437 2462 Low Mid High Chain 0 Chain 1 Total Chain 0 Chain 1 Total 0.0245 0.0203 0.0448 13.89 16.51 13.08 13.49 12.28 14.91 12.89 17.27 0.0223 0.0310 0.0533 15.61 0.0169 0.0195 0.0364 Test mode: IEEE 802.11n HT40 mode Output Power Frequency
(dBm) Output Power
(W) Channel Low Mid High
(MHz) 2412 2437 2462 Chain 0 Chain 1 Total Chain 0 Chain 1 Total 14.36 0.0273 0.0230 0.0503 17.01 13.61 11.79 11.69 14.25 16.20 0.0151 0.0266 0.0417 9.56 13.76 0.0148 0.0090 0.0238 Remark: Total Output Power (w) = Chain 0 (10^(Output Power /10)/1000) + Chain 1 (10^(Output Power /10)/1000)) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 28 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 7.4 BAND EDGES MEASUREMENT LIMIT According to 15.247(d), in any 100 kHz bandwidth outside the frequency bands in which the spread spectrum intentional radiator in operating, the radio frequency power that is produced by the intentional radiator shall be at least 20dB below that in the 100kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiatedmeasurement, provided the transmitter demonstrates compliance with the peak conducted power limits. In addition, radiated emissions which fall in the restricted bands, as defined in 15.205(a), must also comply with the radiated emission limits specified in15.209(a)(see Section15.205(c)). TEST CONFIGURATION Antenna tower EUT 3m 4m Horn antenna Spectrum analyzer Turntable 0.8m 1m 30cm Pre-amp TEST PROCEDURE 1. The EUT is placed on a turntable, which is 0.8m above the ground plane. 2. The turntable shall be rotated for 360 degrees to determine the position of maximum emission level. out the highest emission. 3. EUT is set 3m away from the receiving antenna, which is varied from 1m to 4m to find 4. Set the spectrum analyzer in the following setting in order to capture the lower and upper band-edges of the emission:
(a) PEAK: RBW=1MHz / VBW=3MHz / Sweep=100ms
(b) AVERAGE: RBW=1MHz / VBW=300Hz / Sweep=AUTO 5. Repeat the procedures until all the PEAK and AVERAGE versus POLARIZATION are measured. TEST RESULTS Refer to attach spectrum analyzer data chart. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 29 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Test Plot Band Edges (IEEE 802.11b mode/ CH Low) Detector mode: Peak Polarity: Vertical Detector mode: Average Polarity: Vertical This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 30 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Detector mode: Peak Polarity: Horizontal Detector mode: Average Polarity: Horizontal This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 31 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Band Edges (IEEE 802.11b mode / CH High) Detector mode: Peak Polarity: Vertical Detector mode: Average Polarity: Vertical This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 32 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Detector mode: Peak Polarity: Horizontal Detector mode: Average Polarity: Horizontal This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 33 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Band Edges (IEEE 802.11g mode / CH Low) Detector mode: Peak Polarity: Vertical Detector mode: Average Polarity: Vertical This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 34 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Detector mode: Peak Polarity: Horizontal Detector mode: Average Polarity: Horizontal This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 35 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Band Edges (IEEE 802.11g mode / CH High) Detector mode: Peak Polarity: Vertical Detector mode: Average Polarity: Vertical This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 36 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Detector mode: Peak Polarity: Horizontal Detector mode: Average Polarity: Horizontal This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 37 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Band Edges (IEEE 802.11n HT20 mode / CH Low) Detector mode: Peak Polarity: Vertical Detector mode: Average Polarity: Vertical This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 38 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Detector mode: Peak Polarity: Horizontal Detector mode: Average Polarity: Horizontal This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 39 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Band Edges (IEEE 802.11n HT20 mode / CH High) Detector mode: Peak Polarity: Vertical Detector mode: Average Polarity: Vertical This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 40 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Detector mode: Peak Polarity: Horizontal Detector mode: Average Polarity: Horizontal This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 41 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Band Edges (IEEE 802.11n HT40 mode / CH Low) Detector mode: Peak Polarity: Vertical Detector mode: Average Polarity: Vertical This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 42 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Detector mode: Peak Polarity: Horizontal Detector mode: Average Polarity: Horizontal This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 43 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Band Edges (IEEE 802.11n HT40 mode / CH High) Detector mode: Peak Polarity: Vertical Detector mode: Average Polarity: Vertical This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 44 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Detector mode: Peak Polarity: Horizontal Detector mode: Average Polarity: Horizontal This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 45 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 7.5 PEAK POWER SPECTRAL DENSITY LIMIT 1. According to 15.247(e), for digitally modulated systems, the power spectral density conducted from the intentionalradiator to the antenna shall not be greater than 8 dBm in any 3 kHz band during any time interval ofcontinuous transmission. 2. According to 15.247(f), the digital modulation operation of thehybrid system, with the frequency hopping turned off, shall comply with the power density requirementsof paragraph (d) of this section. TEST CONFIGURATION EUT Spectrum Analyzer TEST PROCEDURE Per KDB 558074 v03r01 This procedure must be used if maximum peak conducted output power was used to demonstrate compliance to the fundamental output power limit, and is optional if the maximum (average) conducted output power was used to demonstrate compliance. 1. Set analyzer center frequency to DTS channel center frequency. 2. Set the span to 1.5 times the DTS channel bandwidth. 3. Set the RBW 3 kHz. 4. Set the VBW 3 x RBW. 5. Detector = peak. 6. Sweep time = auto couple. 7. Trace mode = max hold. 8. Allow trace to fully stabilize. Use the peak marker function to determine the maximum amplitude level. If measured value exceeds limit, reduce RBW (no less than 3 kHz) and repeat TEST RESULTS No non-compliance noted This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 46 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 TEST DATA Test mode: IEEE 802.11b mode Channel Frequency
(MHz) PPSD
(dBm) Low Mid High 2412 2437 2462
-0.54
-1.95
-8.60 Test mode: IEEE 802.11g mode Channel Frequency
(MHz) PPSD
(dBm) Low Mid High 2412 2437 2462
-11.30
-11.82
-12.87 Limit
(dBm) Result 8.00 PASS Limit
(dBm) Result 8.00 PASS Test mode: IEEE 802.11n HT20 mode Frequenc y Channel PPSD(dBm)
(MHz) 2412 2437 2462 Chain 0 Chain 1
-13.10
-12.83
-13.72
-13.52
-12.66
-12.92 Total
-9.95
-10.15
-10.20 Low Mid High Test mode: IEEE 802.11n HT40 mode Frequenc y Channel PPSD(dBm)
(MHz) 2422 2437 2452 Chain 0 Chain 1
-17.55
-18.37
-18.36
-18.75
-18.00
-16.86 Total
-14.93
-15.17
-14.69 Low Mid High Limit
(dBm) 6.66 Limit
(dBm) 6.66 Result PASS PASS PASS Result PASS PASS PASS Remark:
1.Total PPSD (dBm) = 10*LOG(10^(Chain 0 PPSD / 10)+10^(Chain 1 PPSD /10)) 2. The maximum antenna gain is 7.34dBi; therefore the reduction due to antenna gain is 1.34dBi, so the limit is 6.66dBm This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 47 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Test Plot IEEE 802.11b mode PPSD (CH Low) PPSD (CH Mid) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 48 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 PPSD (CH High) IEEE 802.11g mode PPSD (CH Low) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 49 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 PPSD (CH Mid) PPSD (CH High) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 50 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 IEEE 802.11n HT20 mode / Chain 0 PPSD (CH Low) PPSD (CH Mid) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 51 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 PPSD (CH High) IEEE 802.11n HT20 mode / Chain 1 PPSD (CH Low) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 52 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 PPSD (CH Mid) PPSD (CH High) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 53 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 IEEE 802.11n HT40 mode / Chain 0 PPSD (CH Low) PPSD (CH Mid) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 54 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 PPSD (CH High) IEEE 802.11n HT40 mode / Chain 1 PPSD (CH Low) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 55 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 PPSD (CH Mid) PPSD (CH High) This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 56 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 7.6 SPURIOUS EMISSIONS 7.6.1 CONDUCTED MEASUREMENT LIMIT According to 15.247(d), in any 100 kHz bandwidth outside the frequency bands in which the spread spectrum intentional radiator in operating, the radio frequency power that is produced by the intentional radiator shall be at least 20dB below that in the 100kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiatedmeasurement, provided the transmitter demonstrates compliance with the peak conducted power limits. In addition, radiated emissions which fall in the restricted bands, as defined in 15.205(a), must also comply with the radiated emission limits specified in15.209(a)(see Section15.205(c)). TEST CONFIGURATION EUT Spectrum Analyzer TEST PROCEDURE Conducted RF measurements of the transmitter output were made to confirm that the EUT antenna port conducted emissions meet the specified limit and to identify any spurious signals that require further investigation or measurements on the radiated emissions site. The transmitter output is connected to the spectrum analyzer. Set the spectrum analyzer in the following setting as:
Below 1GHz: RBW=100kHz / VBW=100kHz Above 1GHz: RBW=1MHz / VBW=1MHz Measurements are made over the 30MHz to 26GHz range with the transmitter set to the lowest, middle, and highest channels. TEST RESULTS No non-compliance noted. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 57 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Test Plot Spurious Emissions IEEE 802.11b mode CH Low CH Mid This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 58 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 CH High IEEE 802.11g mode CH Low This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 59 Rev.00 CH Mid CH High Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 60 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 IEEE 802.11n HT20 mode / Chain 0 CH Low CH Mid This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 61 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 CH High IEEE 802.11n HT20 mode / Chain 1 CH Low This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 62 Rev.00 CH Mid CH High Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 63 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 IEEE 802.11n HT40 mode / Chain 0 CH Low CH Mid This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 64 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 CH High IEEE 802.11n HT40 mode / Chain 1 CH Low This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 65 Rev.00 CH Mid CH High Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 66 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Conducted band-edge IEEE 802.11b mode CH Low CH High This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 67 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 IEEE 802.11g mode CH Low CH High This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 68 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 IEEE 802.11n HT20 mode / Chain 0 CH Low CH High This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 69 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 IEEE 802.11n HT20 mode / Chain 1 CH Low CH High This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 70 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 IEEE 802.11n HT40 mode / Chain 0 CH Low CH High This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 71 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 IEEE 802.11n HT40 mode / Chain 1 CH Low CH High This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 72 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 7.6.2 RADIATED EMISSIONS LIMIT 1. According to 15.209(a), except as provided elsewhere in this Subpart, the emissions from an intentional radiator shall not exceed the field strength levels specified in the following table:
Frequency
(MHz) 0.009 - 0.490 0.490 - 1.705 1.705 30.0 30-88 88-216 216-960 Above 960 Field Strength
(V/m) 2400/F(kHz) 24000/F(kHz) 30 100 150 200 500 Measurement Distance
(m) 300 30 30 3 3 3 3 Remark: Except as provided in paragraph (g), fundamental emissions from intentional radiators operating under this Section shall not be located in the frequency bands 54-72 MHz, 76-88 MHz, 174-216 MHz or 470-806 MHz. However, operation within these frequency bands is permitted under other sections of this Part, e.g., Sections 15.231 and 15.241. 2. In the above emission table, the tighter limit applies at the band edges. Frequency
(MHz) 0.009 - 0.490 0.490 - 1.705 1.705 30.0 30-88 88-216 216-960 Above 960 Field Strength
(V/m at 3-meter) 2400/F(kHz) +80 24000/F(kHz) +40 Field Strength
(dBV/m at 3-meter) 20LOG((2400/F(kHz))+80) 20LOG((24000/F(kHz))+40) 30 100 150 200 500 69.54 40 43.5 46 54 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 73 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 TEST CONFIGURATION 9kHz ~ 30MHz 3m EUT Turntable 0.8m 1m Reference ground plane 30MHz ~ 1GHz EUT 3m 4m Turntable 0.8m 1m Reference ground plane Loop antenna Spectrum /
Receiver Antenna tower Bi-log antenna Spectrum analyzer This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 74 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Above 1 GHz EUT 3m 4m Antenna tower Horn antenna Spectrum analyzer Turntable 0.8m 1m 30cm Pre-amp TEST PROCEDURE 1. The EUT is placed on a turntable, which is 0.8m above ground plane. 2. The turntable shall be rotated for 360 degrees to determine the position of maximum emission level. 3. EUT is set 3m away from the receiving antenna, which is varied from 1m to 4m to find out the highest emissions. 4. Maximum procedure was performed on the six highest emissions to ensure EUT compliance. 5. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. 6. Set the spectrum analyzer in the following setting as:
Below 30MHz RBW=10kHz / VBW=30kHz / Sweep=AUTO 30 ~ 1000MHz:
RBW=100kHz / VBW=300KHz / Sweep=AUTO Above 1GHz:
a) PEAK: RBW=1MHz / VBW=3MHz / Sweep=AUTO b) AVERAGE: RBW=1MHz / VBW=300Hz / Sweep=AUTO 7. Repeat above procedures until the measurements for all frequencies are complete. TEST RESULTS No non-compliance noted. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 75 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 TEST DATA Below 1GHz Operation Mode:
Temperature:
Humidity:
Frequency
(MHz) Reading
(dBuV) 58.1300 200.7199 579.9900 749.7400 813.7599 897.1799 60.0700 200.7200 593.5700 749.7400 814.7300 897.1800 Remark:
Normal Link 26C 56% RH Test Date:
Tested by:
Polarity:
2014/8/5 Francis Lee Ver. / Hor. Correction Factor
(dB/m)
-20.97
-16.55
-8.06
-6.02
-5.40
-3.98
-21.33
-16.55
-7.96
-6.02
-5.38
-3.98 Result
(dBuV/m) Limit
(dBuV/m) Margin
(dB) 34.07 24.36 29.92 25.27 25.56 25.77 19.53 22.54 27.71 27.16 28.49 27.08 40.00 43.50 46.00 46.00 46.00 46.00 40.00 43.50 46.00 46.00 46.00 46.00
-5.93
-19.14
-16.08
-20.73
-20.44
-20.23
-20.47
-20.96
-18.29
-18.84
-17.51
-18.92 Ant. Pol.
(H/V) Remark QP V QP V QP V V QP QP V V QP H H H H H H QP QP QP QP QP QP 55.04 40.91 37.98 31.29 30.96 29.75 40.86 39.09 35.67 33.18 33.87 31.06 1. No emission found between lowest internal used / generated frequency to 30 MHz. (9kHz ~ 30MHz) 2. Measuring frequencies from 9 kHz to the 1GHz. 3. Radiated emissions measured in the measured frequency range were made with an instrument using peak detector or quasi-peak detector mode. 4. Data of measurement within this frequency range shown --- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. The IF bandwidth of SPA between 30MHz to 1GHz was 100kHz. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 76 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Above 1 GHz Operation Mode:
Temperature:
Humidity:
Freq.
(MHz) 1576.000 1998.000 1998.000 2274.000 2274.000 2636.000 2636.000 3740.000 4825.000 7595.000 1394.000 2206.000 2632.000 4315.000 5145.000 7270.000 Remark:
Reading
(dBuV) 53.80 53.41 40.24 54.72 40.46 54.59 40.53 40.57 42.54 39.80 53.83 53.91 55.18 40.00 40.62 39.17 TX / IEEE 802.11b / CH Low Test Date:
Tested by:
26C Polarity:
56 % RH 2014/7/24 Francis Lee Ver. / Hor. Correct Factor
(dB/m)
-4.90
-1.33
-1.33
-1.49
-1.49
-1.92
-1.92 2.96 2.68 11.89
-7.05
-3.73
-3.36 7.55 6.63 11.42 Result
(dBuV/m) 48.90 52.08 38.91 53.23 38.97 52.67 38.61 43.53 45.22 51.69 46.78 50.18 51.82 47.55 47.25 50.59 Limit
(dBuV/m) 74.00 74.00 54.00 74.00 54.00 74.00 54.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 Margin
(dB)
-25.10
-21.92
-15.09
-20.77
-15.03
-21.33
-15.39
-30.47
-28.78
-22.31
-27.22
-23.82
-22.18
-26.45
-26.75
-23.41 Ant. Pol H/V V V V V V V V V V V H H H H H H Remark peak peak AVG peak AVG peak AVG peak peak peak peak peak peak peak peak peak 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Radiated emissions measured in frequency above 1000MHz were made with an instrument using peak/average detector mode. 3. Average test would be performed if the peak result were greater than the average limitor as required by the applicant. 4. Data of measurement within this frequency range shown --- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with N/A remark, if no specific emissions from the EUT are recorded (ie:
margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 77 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Operation Mode: TX / IEEE 802.11b / CH Mid Temperature:
Humidity:
26C 56 % RH Test Date:
Tested by:
Polarity:
2014/7/24 Francis Lee Ver. / Hor. Freq.
(MHz) 1522.000 1982.000 1982.000 2276.000 2276.000 2802.000 2802.000 3800.000 4875.000 7450.000 1378.000 2198.000 2546.000 2546.000 2886.000 2886.000 3800.000 4875.000 7450.000 Remark:
Reading
(dBuV) 54.85 53.98 40.18 55.07 41.36 55.10 40.41 40.87 43.64 38.71 54.47 54.13 56.06 40.17 53.93 41.63 40.87 45.64 38.71 Correct Factor
(dB/m)
-5.16
-1.58
-1.58
-1.50
-1.50
-2.07
-2.07 3.69 3.81 11.42
-7.47
-3.56
-3.60
-3.60
-1.83
-1.83 3.69 3.81 11.42 Result
(dBuV/m) 49.69 52.40 38.60 53.57 39.86 53.03 38.34 44.56 47.45 50.13 47.00 50.57 52.46 36.57 52.10 39.80 44.56 49.45 50.13 Limit
(dBuV/m) 74.00 74.00 54.00 74.00 54.00 74.00 54.00 74.00 74.00 74.00 74.00 74.00 74.00 54.00 74.00 54.00 74.00 74.00 74.00 Margin
(dB)
-24.31
-21.60
-15.40
-20.43
-14.14
-20.97
-15.66
-29.44
-26.55
-23.87
-27.00
-23.43
-21.54
-17.43
-21.90
-14.20
-29.44
-24.55
-23.87 Ant. Pol H/V V V V V V V V V V V H H H H H H H H H Remark peak peak AVG peak AVG peak AVG peak peak peak peak peak peak AVG peak AVG peak peak peak 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Radiated emissions measured in frequency above 1000MHz were made with an instrument using peak/average detector mode. 3. Average test would be performed if the peak result were greater than the average limitor as required by the applicant. 4. Data of measurement within this frequency range shown --- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with N/A remark, if no specific emissions from the EUT are recorded (ie:
margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 78 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Operation Mode: TX / IEEE 802.11b / CH High Temperature:
Humidity:
26C 56 % RH Test Date:
Tested by:
Polarity:
2014/7/24 Francis Lee Ver. / Hor. Freq.
(MHz) 1518.000 1972.000 1972.000 2270.000 2270.000 2882.000 2882.000 3800.000 4925.000 7590.000 1400.000 2168.000 2758.000 3635.000 4925.000 7235.000 Remark:
Reading
(dBuV) 53.53 54.28 40.22 54.41 41.06 55.01 40.36 40.43 42.44 39.65 53.38 53.85 54.00 41.59 39.64 40.11 Correct Factor
(dB/m)
-5.18
-1.74
-1.74
-1.48
-1.48
-0.92
-0.92 3.69 4.61 11.87
-6.90
-3.63
-2.85 4.02 7.26 10.96 Result
(dBuV/m) 48.35 52.54 38.48 52.93 39.58 54.09 39.44 44.12 47.05 51.52 46.48 50.22 51.15 45.61 46.90 51.07 Limit
(dBuV/m) 74.00 74.00 54.00 74.00 54.00 74.00 54.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 Margin
(dB)
-25.65
-21.46
-15.52
-21.07
-14.42
-19.91
-14.56
-29.88
-26.95
-22.48
-27.52
-23.78
-22.85
-28.39
-27.10
-22.93 Ant. Pol H/V V V V V V V V V V V H H H H H H Remark peak peak AVG peak AVG peak AVG peak peak peak peak peak peak peak peak peak 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Radiated emissions measured in frequency above 1000MHz were made with an instrument using peak/average detector mode. 3. Average test would be performed if the peak result were greater than the average limitor as required by the applicant. 4. Data of measurement within this frequency range shown --- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with N/A remark, if no specific emissions from the EUT are recorded (ie:
margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 79 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Operation Mode: TX / IEEE 802.11g / CH Low Temperature:
Humidity:
26C 56 % RH Test Date:
Tested by:
Polarity:
2014/7/24 Francis Lee Ver. / Hor. Freq.
(MHz) 1608.000 1998.000 2200.000 2200.000 2872.000 3610.000 5850.000 7510.000 1420.000 2208.000 2904.000 3215.000 6075.000 7240.000 Remark:
Reading
(dBuV) 51.95 51.59 53.42 40.91 51.96 41.17 40.28 38.54 52.21 52.84 52.03 44.31 39.20 40.43 Correct Factor
(dB/m)
-4.86
-1.33
-1.33
-1.33
-1.06 2.88 5.70 11.58
-7.32
-3.78
-1.69 1.11 8.72 11.02 Result
(dBuV/m) 47.09 50.26 52.09 39.58 50.90 44.05 45.98 50.12 44.89 49.06 50.34 45.42 47.92 51.45 Limit
(dBuV/m) 74.00 74.00 74.00 54.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 Margin
(dB)
-26.91
-23.74
-21.91
-14.42
-23.10
-29.95
-28.02
-23.88
-29.11
-24.94
-23.66
-28.58
-26.08
-22.55 Ant. Pol H/V V V V V V V V V H H H H H H Remark peak peak peak AVG peak peak peak peak peak peak peak peak peak peak 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Radiated emissions measured in frequency above 1000MHz were made with an instrument using peak/average detector mode. 3. Average test would be performed if the peak result were greater than the average limitor as required by the applicant. 4. Data of measurement within this frequency range shown --- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with N/A remark, if no specific emissions from the EUT are recorded (ie:
margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 80 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Operation Mode: TX / IEEE 802.11g / CH Mid Temperature:
Humidity:
26C 56 % RH Test Date:
Tested by:
Polarity:
2014/7/24 Francis Lee Ver. / Hor. Freq.
(MHz) 1546.000 1996.000 2338.000 2338.000 2694.000 3760.000 5500.000 7310.000 1390.000 2196.000 2630.000 3250.000 5590.000 7300.000 Remark:
Reading
(dBuV) 51.91 52.25 55.02 42.97 53.04 40.79 39.11 40.70 52.16 53.01 53.98 42.95 39.41 39.49 Correct Factor
(dB/m)
-5.04
-1.36
-1.60
-1.60
-1.51 3.20 6.23 10.56
-7.16
-3.57
-3.36 1.18 9.17 11.82 Result
(dBuV/m) 46.87 50.89 53.42 41.37 51.53 43.99 45.34 51.26 45.00 49.44 50.62 44.13 48.58 51.31 Limit
(dBuV/m) 74.00 74.00 74.00 54.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 Margin
(dB)
-27.13
-23.11
-20.58
-12.63
-22.47
-30.01
-28.66
-22.74
-29.00
-24.56
-23.38
-29.87
-25.42
-22.69 Ant. Pol H/V V V V V V V V V H H H H H H Remark peak peak peak AVG peak peak peak peak peak peak peak peak peak peak 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Radiated emissions measured in frequency above 1000MHz were made with an instrument using peak/average detector mode. 3. Average test would be performed if the peak result were greater than the average limitor as required by the applicant. 4. Data of measurement within this frequency range shown --- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with N/A remark, if no specific emissions from the EUT are recorded (ie:
margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 81 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Operation Mode: TX / IEEE 802.11g / CH High Temperature:
Humidity:
26C 56 % RH Test Date:
Tested by:
Polarity:
2014/7/24 Francis Lee Ver. / Hor. Freq.
(MHz) 1540.000 1984.000 2312.000 2312.000 2702.000 3775.000 5400.000 7600.000 1408.000 2202.000 2838.000 3790.000 5975.000 7305.000 Remark:
Reading
(dBuV) 51.92 51.56 55.35 42.54 52.26 40.29 39.50 38.97 52.54 52.87 53.65 40.55 39.86 39.28 Correct Factor
(dB/m)
-5.07
-1.55
-1.56
-1.56
-1.48 3.38 6.39 11.91
-7.07
-3.62
-2.19 4.97 8.93 11.79 Result
(dBuV/m) 46.85 50.01 53.79 40.98 50.78 43.67 45.89 50.88 45.47 49.25 51.46 45.52 48.79 51.07 Limit
(dBuV/m) 74.00 74.00 74.00 54.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 Margin
(dB)
-27.15
-23.99
-20.21
-13.02
-23.22
-30.33
-28.11
-23.12
-28.53
-24.75
-22.54
-28.48
-25.21
-22.93 Ant. Pol H/V V V V V V V V V H H H H H H Remark peak peak peak AVG peak peak peak peak peak peak peak peak peak peak 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Radiated emissions measured in frequency above 1000MHz were made with an instrument using peak/average detector mode. 3. Average test would be performed if the peak result were greater than the average limitor as required by the applicant. 4. Data of measurement within this frequency range shown --- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with N/A remark, if no specific emissions from the EUT are recorded (ie:
margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 82 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Operation Mode: TX / IEEE 802.11n HT20 mode Temperature:
Humidity:
/ CH Low 26C 55 % RH Test Date:
Tested by:
Polarity:
2014/7/24 Francis Lee Ver. / Hor. Freq.
(MHz) 1478.000 2006.000 2228.000 2228.000 2506.000 2506.000 2888.000 3655.000 5370.000 7550.000 1420.000 2174.000 2704.000 3215.000 5630.000 7415.000 Remark:
Reading
(dBuV) 51.84 51.64 55.00 41.19 55.30 41.53 52.46 40.88 39.28 38.61 51.82 52.95 53.11 43.96 39.15 39.07 Correct Factor
(dB/m)
-5.56
-1.44
-1.39
-1.39
-1.00
-1.00
-0.83 2.68 6.04 11.72
-7.32
-3.62
-3.33 1.11 8.87 11.25 Result
(dBuV/m) 46.28 50.20 53.61 39.80 54.30 40.53 51.63 43.56 45.32 50.33 44.50 49.33 49.78 45.07 48.02 50.32 Limit
(dBuV/m) 74.00 74.00 74.00 54.00 74.00 54.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 Margin
(dB)
-27.72
-23.80
-20.39
-14.20
-19.70
-13.47
-22.37
-30.44
-28.68
-23.67
-29.50
-24.67
-24.22
-28.93
-25.98
-23.68 Ant. Pol H/V V V V V V V V V V V H H H H H H Remark peak peak peak AVG peak AVG peak peak peak peak peak peak peak peak peak peak 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Radiated emissions measured in frequency above 1000MHz were made with an instrument using peak/average detector mode. 3. Average test would be performed if the peak result were greater than the average limitor as required by the applicant. 4. Data of measurement within this frequency range shown --- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with N/A remark, if no specific emissions from the EUT are recorded (ie:
margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 83 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Operation Mode: TX / IEEE 802.11n HT20 mode Temperature:
Humidity:
/ CH Mid 26C 56 % RH Test Date:
Tested by:
Polarity:
2014/7/24 Francis Lee Ver. / Hor. Freq.
(MHz) 1500.000 1996.000 2206.000 2206.000 2542.000 2542.000 3250.000 4875.000 7315.000 1400.000 2216.000 2572.000 2964.000 3775.000 4875.000 4875.000 7320.000 Remark:
Reading
(dBuV) 53.14 52.78 57.41 43.12 57.35 43.13 43.35 42.05 39.74 51.57 55.89 54.41 52.51 41.37 47.19 34.40 39.43 Correct Factor
(dB/m)
-5.26
-1.36
-1.34
-1.34
-1.45
-1.45
-0.01 3.81 10.60
-6.90
-4.01
-3.49
-1.05 4.77 6.73 6.73 11.72 Result
(dBuV/m) 47.88 51.42 56.07 41.78 55.90 41.68 43.34 45.86 50.34 44.67 51.88 50.92 51.46 46.14 53.92 41.13 51.15 Limit
(dBuV/m) 74.00 74.00 74.00 54.00 74.00 54.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 54.00 74.00 Margin
(dB)
-26.12
-22.58
-17.93
-12.22
-18.10
-12.32
-30.66
-28.14
-23.66
-29.33
-22.12
-23.08
-22.54
-27.86
-20.08
-12.87
-22.85 Ant. Pol H/V V V V V V V V V V H H H H H H H H Remark peak peak peak AVG peak AVG peak peak peak peak peak peak peak peak peak AVG peak 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Radiated emissions measured in frequency above 1000MHz were made with an instrument using peak/average detector mode. 3. Average test would be performed if the peak result were greater than the average limitor as required by the applicant. 4. Data of measurement within this frequency range shown --- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with N/A remark, if no specific emissions from the EUT are recorded (ie:
margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 84 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Operation Mode: TX / IEEE 802.11n HT20 mode Temperature:
Humidity:
/ CH High 26C 56 % RH Test Date:
Tested by:
Polarity:
2014/7/24 Francis Lee Ver. / Hor. Freq.
(MHz) 1582.000 1990.000 2302.000 2302.000 2688.000 3575.000 4930.000 7495.000 1418.000 2150.000 2764.000 3605.000 4930.000 7390.000 Remark:
Reading
(dBuV) 51.79 52.05 54.82 41.80 53.06 41.09 40.91 38.94 52.29 53.57 53.15 42.17 41.84 39.74 Correct Factor
(dB/m)
-4.87
-1.46
-1.55
-1.55
-1.55 2.75 4.66 11.53
-7.28
-3.67
-2.80 4.14 7.28 11.36 Result
(dBuV/m) 46.92 50.59 53.27 40.25 51.51 43.84 45.57 50.47 45.01 49.90 50.35 46.31 49.12 51.10 Limit
(dBuV/m) 74.00 74.00 74.00 54.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 Margin
(dB)
-27.08
-23.41
-20.73
-13.75
-22.49
-30.16
-28.43
-23.53
-28.99
-24.10
-23.65
-27.69
-24.88
-22.90 Ant. Pol H/V V V V V V V V V H H H H H H Remark peak peak peak AVG peak peak peak peak peak peak peak peak peak peak 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Radiated emissions measured in frequency above 1000MHz were made with an instrument using peak/average detector mode. 3. Average test would be performed if the peak result were greater than the average limitor as required by the applicant. 4. Data of measurement within this frequency range shown --- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with N/A remark, if no specific emissions from the EUT are recorded (ie:
margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 85 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Operation Mode: TX / IEEE 802.11n HT40 mode Temperature:
Humidity:
/ CH Low 26C 56 % RH Test Date:
Tested by:
Polarity:
2014/7/24 Francis Lee Ver. / Hor. Freq.
(MHz) 1538.000 1992.000 2202.000 2202.000 2676.000 3605.000 5925.000 7450.000 1414.000 2198.000 2844.000 4340.000 5655.000 7360.000 Remark:
Reading
(dBuV) 52.72 52.00 54.09 43.37 53.35 40.59 40.21 40.51 52.24 53.28 52.40 40.07 37.81 40.09 Correct Factor
(dB/m)
-5.08
-1.43
-1.33
-1.33
-1.64 2.91 6.00 11.42
-7.19
-3.56
-2.15 7.36 8.59 11.51 Result
(dBuV/m) 47.64 50.57 52.76 42.04 51.71 43.50 46.21 51.93 45.05 49.72 50.25 47.43 46.40 51.60 Limit
(dBuV/m) 74.00 74.00 74.00 54.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 Margin
(dB)
-26.36
-23.43
-21.24
-11.96
-22.29
-30.50
-27.79
-22.07
-28.95
-24.28
-23.75
-26.57
-27.60
-22.40 Ant. Pol H/V V V V V V V V V H H H H H H Remark peak peak peak AVG peak peak peak peak peak peak peak peak peak peak 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Radiated emissions measured in frequency above 1000MHz were made with an instrument using peak/average detector mode. 3. Average test would be performed if the peak result were greater than the average limitor as required by the applicant. 4. Data of measurement within this frequency range shown --- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with N/A remark, if no specific emissions from the EUT are recorded (ie:
margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 86 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Operation Mode: TX / IEEE 802.11n HT40 mode Temperature:
Humidity:
/ CH Mid 26C 56 % RH Test Date:
Tested by:
Polarity:
2014/7/24 Francis Lee Ver. / Hor. Freq.
(MHz) 1536.000 2012.000 2216.000 2216.000 2842.000 4000.000 5840.000 7325.000 1420.000 2202.000 2650.000 4885.000 5910.000 7295.000 Remark:
Reading
(dBuV) 52.71 52.62 56.52 46.72 52.95 40.16 39.17 39.88 52.11 54.55 53.54 41.30 38.98 39.39 Correct Factor
(dB/m)
-5.09
-1.57
-1.37
-1.37
-1.50 3.49 5.58 10.69
-7.32
-3.62
-3.36 6.90 9.18 11.75 Result
(dBuV/m) 47.62 51.05 55.15 45.35 51.45 43.65 44.75 50.57 44.79 50.93 50.18 48.20 48.16 51.14 Limit
(dBuV/m) 74.00 74.00 74.00 54.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 Margin
(dB)
-26.38
-22.95
-18.85
-8.65
-22.55
-30.35
-29.25
-23.43
-29.21
-23.07
-23.82
-25.80
-25.84
-22.86 Ant. Pol H/V V V V V V V V V H H H H H H Remark peak peak peak AVG peak peak peak peak peak peak peak peak peak peak 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Radiated emissions measured in frequency above 1000MHz were made with an instrument using peak/average detector mode. 3. Average test would be performed if the peak result were greater than the average limitor as required by the applicant. 4. Data of measurement within this frequency range shown --- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with N/A remark, if no specific emissions from the EUT are recorded (ie:
margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 87 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Operation Mode: TX / IEEE 802.11n HT40 mode Temperature:
Humidity:
/ CH High 26C 56 % RH Test Date:
Tested by:
Polarity:
2014/7/24 Francis Lee Ver. / Hor. Freq.
(MHz) 1970.000 2222.000 2222.000 2868.000 3810.000 5155.000 7425.000 1406.000 2192.000 2880.000 4310.000 5655.000 7280.000 Remark:
Reading
(dBuV) 52.99 54.45 41.53 52.04 39.73 40.24 38.86 51.80 52.42 52.44 38.70 39.82 39.34 Correct Factor
(dB/m)
-1.77
-1.38
-1.38
-1.12 3.47 5.01 11.36
-7.03
-3.58
-1.88 7.59 8.59 11.55 Result
(dBuV/m) 51.22 53.07 40.15 50.92 43.20 45.25 50.22 44.77 48.84 50.56 46.29 48.41 50.89 Limit
(dBuV/m) 74.00 74.00 54.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 Margin
(dB)
-22.78
-20.93
-13.85
-23.08
-30.80
-28.75
-23.78
-29.23
-25.16
-23.44
-27.71
-25.59
-23.11 Ant. Pol H/V V V V V V V V H H H H H H Remark peak peak AVG peak peak peak peak peak peak peak peak peak peak 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Radiated emissions measured in frequency above 1000MHz were made with an instrument using peak/average detector mode. 3. Average test would be performed if the peak result were greater than the average limitor as required by the applicant. 4. Data of measurement within this frequency range shown --- in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. 5. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with N/A remark, if no specific emissions from the EUT are recorded (ie:
margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 88 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 7.7 POWERLINE CONDUCTED EMISSIONS LIMIT According to 15.207(a), except as shown in paragraphs (b) and (c) of this section, for an intentional radiator that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that isconducted back onto the AC power line on any frequency or frequencies within the band 150 kHz to 30MHz shall not exceed the limits in the following table, as measured using a 50 H/50 ohms lineimpedance stabilization network (LISN). Compliance with the provisions of this paragraph shall be basedon the measurement of the radio frequency voltage between each power line and ground at the powerterminal. The lower limit applies at the boundary between the frequency ranges. FrequencyRange
(MHz) 0.15 to 0.50 0.50 to 5 5 to 30 Limits
(dBV) Quasi-peak 66 to 56*
56 60 Average 56 to 46*
46 50
* Decreases with the logarithm of the frequency. TEST CONFIGURATION See test photographs attached in Appendix II for the actual connections between EUT and support equipment. TEST PROCEDURE 1. The EUT was placed on a table, which is 0.8m above ground plane. 2. Maximum procedure was performed on the six highest emissions to ensure EUT compliance. 3. Repeat above procedures until all frequency measured were complete. TEST RESULTS The initial step in collecting conducted data is a spectrum analyzer peak scan of the measurement range. Significant peaks are then marked as shown on the following data page, and these signals are then quasi-peaked. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 89 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Normal Link 25oC, 57% RH Johnny Chen 6dBBandwidth 9 kHz Test Date:
2014/8/11 Line L1 TEST DATA Test Mode Environmental Conditions Tested By NO. Frequency QuasiPeak Average Correction QuasiPeak Average QuasiPeak Average QuasiPeak Average reading reading factor result result limit limit margin margin Remark
(MHz)
(dBuV)
(dBuV) 1 2 0.1549 0.3664 3*
0.3848 4 5 0.4075 0.7140 31.91 25.67 32.08 31.58 24.71 23.05 16.03 29.48 28.74 21.16
(dB) 9.79 9.74 9.75 9.75 9.74
(dBuV)
(dBuV)
(dBuV)
(dBuV)
(dB)
(dB)
(Pass/Fail) 41.70 35.41 41.83 41.33 34.45 33.73 32.84 25.77 39.23 38.49 30.90 28.78 65.73 58.58 58.18 57.70 56.00 56.00 55.73 48.58 48.18 47.70 46.00 46.00
-24.03
-22.89
-23.17
-22.81
-16.35
-16.37
-8.95
-9.21
-21.55
-15.10
-22.27
-17.22 Pass Pass Pass Pass Pass Pass 1.1115 6 REMARKS:L1 = Line One (Live Line) 19.05 24.00 9.73 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 90 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Normal Link 25oC, 57% RH Johnny Chen 6dBBandwidth 9 kHz Test Date:
2014/8/11 Line L2 Test Mode Environmental Conditions Tested By NO. Frequency QuasiPeak Average Correction QuasiPeak Average QuasiPeak Average QuasiPeak Average reading reading factor result result limit limit margin margin Remark 1 2 3 4
(MHz)
(dBuV)
(dBuV) 0.1517 31.88 20.14 0.1780 30.88 21.08 0.2041 29.07 21.31 0.3569 27.27 22.49 5*
0.3814 28.55 24.94
(dB) 9.77 9.74 9.72 9.72 9.73 0.4077 6 9.73 REMARKS:L2 = Line Two (Neutral Line) 23.83 27.35
(dBuV)
(dBuV)
(dBuV)
(dBuV)
(dB)
(dB)
(Pass/Fail) 41.65 40.62 38.79 36.99 38.28 37.08 29.91 30.82 31.03 32.21 34.67 33.56 65.91 64.58 63.44 58.80 58.25 57.70 55.91 54.58 53.44 48.80 48.25 47.70
-24.26
-26.00
-23.96
-23.76
-24.65
-22.41
-21.81
-16.59
-19.97
-13.58
-20.62
-14.14 Pass Pass Pass Pass Pass Pass This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 91 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 8. APPENDIX IPHOTOGRAPHS OF TEST SETUP Radiated Emission Set up Photos Below 1GHz This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 92 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Above 1GHz This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 93 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Conducted Emission Setup Photos This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 94 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Powerline Conducted EmissionsSetup Photos This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 95 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 APPENDIX 1: PHOTOGRAPHS OF EUT Refer toT140708D15 Photographs. This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 96 Rev.00
1 2 3 | Test Setup Photos | Test Setup Photos | 411.83 KiB | August 28 2014 |
Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 8. APPENDIX IPHOTOGRAPHS OF TEST SETUP Radiated Emission Set up Photos Below 1GHz This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 92 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Above 1GHz This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 93 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Conducted Emission Setup Photos This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 94 Rev.00 Compliance Certification Services Inc. Report No.: T140708D15-RP1 FCC ID: P27NA301ZW Date of Issue: August 18, 2014 Powerline Conducted EmissionsSetup Photos This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Page 95 Rev.00
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2018-01-05 | 916 ~ 916 | DXX - Part 15 Low Power Communication Device Transmitter | Class II Permissive Change |
2 | 2014-08-28 | 2422 ~ 2452 | DTS - Digital Transmission System | Original Equipment |
3 | 908.4 ~ 908.4 | DXX - Part 15 Low Power Communication Device Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2018-01-05
|
||||
1 2 3 |
2014-08-28
|
|||||
1 2 3 | Applicant's complete, legal business name |
Sercomm Corporation
|
||||
1 2 3 | FCC Registration Number (FRN) |
0015548027
|
||||
1 2 3 | Physical Address |
8F, No. 3-1, YuanQu St, NanKang
|
||||
1 2 3 |
Taipei
|
|||||
1 2 3 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
u******@sgs.com
|
||||
1 2 3 |
V******@babt.com
|
|||||
1 2 3 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
1 2 3 |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
P27
|
||||
1 2 3 | Equipment Product Code |
NA301ZW
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
N****** W****
|
||||
1 2 3 | Title |
Engineer
|
||||
1 2 3 | Telephone Number |
886-2******** Extension:
|
||||
1 2 3 | Fax Number |
886-2********
|
||||
1 2 3 |
N******@SERCOMM.COM
|
|||||
app s | Technical Contact | |||||
1 2 3 | Firm Name |
Compliance Certification Services Inc.
|
||||
1 2 3 | Name |
M**** S******
|
||||
1 2 3 | Physical Address |
No. 11, Wugong 6th Rd., Wugu District
|
||||
1 2 3 |
New Taipei City, 24891
|
|||||
1 2 3 |
Taiwan
|
|||||
1 2 3 | Telephone Number |
+886 ********
|
||||
1 2 3 | Fax Number |
886 2********
|
||||
1 2 3 |
m******@ccsrf.com
|
|||||
app s | Non Technical Contact | |||||
1 2 3 | Firm Name |
Compliance Certification Services Inc.
|
||||
1 2 3 | Name |
M****** S********
|
||||
1 2 3 | Physical Address |
No. 11, Wugong 6th Rd., Wugu District
|
||||
1 2 3 |
New Taipei City, 24891
|
|||||
1 2 3 |
Taiwan
|
|||||
1 2 3 | Telephone Number |
+886 ********
|
||||
1 2 3 | Fax Number |
886 2********
|
||||
1 2 3 |
m******@ccsrf.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 2 3 | DTS - Digital Transmission System | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Smart home gateway with 802.11b/g/n and Z-Wave | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Class II Permissive Change | ||||
1 2 3 | Original Equipment | |||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Permissive Change to add 916MHz band. | ||||
1 2 3 | Output power is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter procedures. End users must be informed of the requirements for satisfying RF Exposure compliance. | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
Compliance Certification Services Inc. Wugu Lab.
|
||||
1 2 3 |
Compliance Certification Services Inc.
|
|||||
1 2 3 | Name |
H**** L******
|
||||
1 2 3 | Telephone Number |
886-2******** Extension:
|
||||
1 2 3 |
886-2******** Extension:
|
|||||
1 2 3 | Fax Number |
+886-********
|
||||
1 2 3 |
886-2********
|
|||||
1 2 3 |
h******@sgs.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 908.4 | 908.4 | ||||||||||||||||||||||||||||||||||||
1 | 2 | 15C | CC | 916 | 916 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2412 | 2462 | 0.1119 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15C | CC | 2412 | 2462 | 0.1875 | |||||||||||||||||||||||||||||||||||
2 | 3 | 15C | CC MO | 2412 | 2462 | 0.3137 | |||||||||||||||||||||||||||||||||||
2 | 4 | 15C | CC MO | 2422 | 2452 | 0.3164 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 908.40000000 | 908.40000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC