all | frequencies |
|
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|---|
manuals | photos | labels |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Users Manual | Users Manual | 1014.35 KiB | March 04 2019 | |||
1 2 |
|
Users manual (statement) | Users Manual | 335.59 KiB | March 04 2019 | |||
1 2 |
|
Internal photos | Internal Photos | 1.14 MiB | March 04 2019 | |||
1 2 |
|
External photos | External Photos | 397.92 KiB | March 04 2019 | |||
1 2 |
|
Label Location | ID Label/Location Info | 852.22 KiB | March 04 2019 | |||
1 2 |
|
Label Sample | ID Label/Location Info | 1.62 MiB | March 04 2019 | |||
1 2 |
|
Agent Authorization | Cover Letter(s) | 382.51 KiB | March 04 2019 | |||
1 2 |
|
Attestation (Channel and Mode Declaration) | Attestation Statements | 401.67 KiB | March 04 2019 | |||
1 2 |
|
Attestation (Label Location Declaration) | Attestation Statements | 96.85 KiB | March 04 2019 | |||
1 2 | Block Diagram | Block Diagram | April 03 2019 | confidential | ||||
1 2 |
|
Confidentiality request(Long term) | Cover Letter(s) | 395.79 KiB | March 04 2019 | |||
1 2 | Operational Description | Operational Description | April 03 2019 | confidential | ||||
1 2 |
|
RF Exposure Info (MPE) rev | RF Exposure Info | 127.24 KiB | March 04 2019 | |||
1 2 | Schematics | Schematics | April 03 2019 | confidential | ||||
1 2 | Software Operational Description | Operational Description | April 03 2019 | confidential | ||||
1 2 |
|
Test Report(NII) rev | Test Report | 1.04 MiB | March 04 2019 | |||
1 2 |
|
Test setup photos | Test Setup Photos | 322.45 KiB | March 04 2019 | |||
1 2 | Test Report | April 03 2019 | ||||||
1 2 |
|
Test Report(DTS-WLAN) rev | Test Report | 1.37 MiB | March 04 2019 |
1 2 | Users Manual | Users Manual | 1014.35 KiB | March 04 2019 |
Welcome to your Camera Contents Introduction to Your Camera .............................. 2 Features ........................................................................2 Components ................................................................ 4 Installing the Product ......................................... 7 Launching the App ............................................ 10 Mounting on the Wall ........................................ 13 Specifications ..................................................... 15 Works with SmartThings ....................................17 1 Introduction to Your Camera This SmartThings Cam can monitor your home and then alert any suspected motions in real time. Features Standalone system: Equipped with CPU and video encoder for operation, which requires only power and network connections. HD video: Supports up to 1080p HD video with H.264 encoding. Trusted Platform Module (TPM): Its dedicated chip safely shields cryptographic keys used for authentication to ensure safe communication between network components and encrypted video data. Built-in microphone: Used for bi-directional conversation. 2 Introduction to Your Camera 2 IR LEDs: Can provide illumination up to 5 meters away for better video quality. High dynamic range (HDR): Balances the illumination for clear image quality. Motion detection zone: Can be changed by dragging or tapping areas for motion monitoring. Recording time: Can be specified to let the camera record video upon motion detection. 3 Introduction to Your Camera Components Front panel IR LEDs Microphones Component Status LED 4 Status LED IR LEDs Microphones Lens Light Sensor Description Off: No power supplied Blue On: Power supplied Slow blinking of Blue: Booting in progress Fast blinking of Blue: Rebooted with default settings Introduction to Your Camera Component Status LED Lens IR Sensors Microphones Light Sensor Description Green On: Wireless network connected Fast blinking of Green: Data communication in progress Amber On: Firmware upgrade failed. Then the camera reboots after 5 seconds Fast blinking of Amber: Camera available for softAp or QR scan Blinking of Blue and Amber: Upgrading the firmware Fixed camera lens Used for illumination Used for conversation Used to detect light 5 Introduction to Your Camera Rear panel Reset Button Power Plug Stand Mounting Plate Component Power Plug Reset Button Stand Mounting Plate 6 Description Connect the power adapter here. Never use other adapters Press for over 10 seconds to restore the factory default settings. Then the system reboots with the default values. Used to support the camera on a table or wall. Used to install the camera on a wall after removing from the stand. Installing the Product Installing the Product When the product is ready, install it by keeping the following procedure:
1 Check the following items are included in the package including this user guide. 2 Determine the location to install the product. 7 Installing the Product 3 Connect the power plug into the camera and then plug the power connector into the outlet to supply power. Never use power adapters other than the provided one. It may cause damage to the system. The status LED blinks (approx. 1 minute) in amber during startup. Then the LED color changes to blue before registration. After wireless connection is finished, its color changes to green. 8 Installing the Product 4 Download the SmartThings app for Android or iOS, create an account, and follow on-screen instructions to add the device. 5 Use the SmartThings app to scan the QR code at the bottom of the stand and then follow on-
screen instructions to finish setup. The QR code is located under the mounting plate. When you cannot find the QR code, remove the mounting plate. 9 Launching the App When you launch the app after all things are made, the main screen appears on your mobile device. For monitoring, select the desired site on the screen. Then the following live view screen appears. 1 2 3 4 5 7 6 10 Launching the App No. 1 2 3 4 5 6 7 Description When clicked, the following menus appear:
My Info: Moves to the subscription page. You can subscribe to the premium service at Samsung.com. Edit: Can edit the device information. Settings: Moves to the camera plug-in settings page. Information: Displays the app information. Toggles between full live view screen and normal screen. Displays the live view screen. Enables/disables the microphone. Mutes the video sound. Captures video from the screen. Records the live video. 11 Launching the App The differentiated subscription plans are provided as follows:
Basic Plan Free of charge Can connect up to 2 SmartThings cameras Can customize the motion detection zones Can clip the recording for up to 10 seconds No cloud archiving Premium Plan
$7.99 per month or $79.99 per year Can connect up to 5 SmartThings cameras Can customize the motion detection zones Can clip the recording for up to 60 seconds Cloud archiving available 12 Mounting on the Wall The camera is usually mounted on the wall for permanent installation. In this case, follow the steps below:
1 Remove the mounting plate from the stand by sliding it forward from the stand. 2 Hold the mounting plate at the desired location and mark the holes for two mounting holes. 3 Drill two pilot holes on the mounting surface at the marked location. 13 Mounting on the Wall 4 Align two mounting holes on the camera stand with two pilot holes and then mount the plate on the wall surface with two provided screws. 5 Slide the camera stand onto the mounting plate until it clicks in place. 6 Insert the power cable into the hole of the stand, connect the cable to the camera, and plug the power adapter into the outlet. 7 Adjust the camera for better performance and fix it firmly. 14 Specifications Power Color Sensor Dimensions
(H x W x D) Operating tempera Storage temperature Video Audio Image resolution Adapter input:
100-240 V AC, 50/60 Hz Adapter output:
12 V DC, 1 A White
. 7" CMOS sensor 3.98 x 1.82 x 1.72
(101 mm x 46.3 mm x 43.7 mm) 32 F to 104 F
(0 C to 40C)
-4 F to 158 F
(-20 C to 70 C) Up to 1080p at 30 frames/sec, H.264 encoding Bi-directional full-duplex audio, G.711 (built-in microphone & 1W speaker) 1080p (1920 x 1080), 720p (1280 x 720), VGA (640 x 480) 15 Specifications Viewing angle Night vision IR LEDs LED type Connectivity 145 diagonal
(Dewarping FOV is to be updated later) Built-in IR LEDs for night-time illumination (range within 5 m) 2 1 tri-color LED
(power/network/status) Wi-Fi 802.11b/g/n, 2.4 GHz/5 GHz
(WPA & WPA2 encryption supported) IEEE 802.11ac, 802.11b/g/n Wireless interface Vision Intelligence People/sound/obstruction detection at the edge ABR (Adaptive Bit Rate) TCP/IP, HTTPS, DHCP, NTP, RTP, RTCP, RTSP, DNS Network protocols 16 Works with SmartThings SmartThings works with a wide range of connected devices, including lights, cameras, locks, thermostats, sensors, and more. To purchase a device to connect to your product, be sure to check the Works with SmartThings label. 17
1 2 | Users manual (statement) | Users Manual | 335.59 KiB | March 04 2019 |
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
-
-
-
-
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only.
1 2 | Internal photos | Internal Photos | 1.14 MiB | March 04 2019 |
CONSTRUCTION PHOTOS OF EUT Reference No.: 190225D05-Int Page 1 / 11 Reference No.: 190225D05-Int Page 2 / 11 Reference No.: 190225D05-Int Page 3 / 11 Reference No.: 190225D05-Int Page 4 / 11 Reference No.: 190225D05-Int Page 5 / 11 Reference No.: 190225D05-Int Page 6 / 11 Reference No.: 190225D05-Int Page 7 / 11 Reference No.: 190225D05-Int Page 8 / 11 Reference No.: 190225D05-Int Page 9 / 11 Reference No.: 190225D05-Int Page 10 / 11 Antenna Antenna Reference No.: 190225D05-Int Page 11 / 11
1 2 | External photos | External Photos | 397.92 KiB | March 04 2019 |
CONSTRUCTION PHOTOS OF EUT Reference No.: 190225D05-Ext Page 1 / 6 Reference No.: 190225D05-Ext Page 2 / 6 Reference No.: 190225D05-Ext Page 3 / 6 Reference No.: 190225D05-Ext Page 4 / 6 Reference No.: 190225D05-Ext Page 5 / 6 Reference No.: 190225D05-Ext Page 6 / 6
1 2 | Agent Authorization | Cover Letter(s) | 382.51 KiB | March 04 2019 |
Sercomm Corporation Taipei Office: 8F, No.3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. TEL: 886-2-2655-3988 FAX: 886-2-2655-3965 Date: 2019-04-01 FCC ID: P27RC8335PRO To whom it may concern:
AUTHORIZATION LETTER We, the undersigned, hereby authorize Amanda Wu/ Senior Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Amanda Wu/ Senior Specialist of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. If you have any questions regarding the authorization, please dont hesitate to contact us. Sincerely yours,
-----------------------------------------------------
Sercomm Corporation Nick Wu/ Engineer TEL: 886-2-2655-3988*2631 FAX: 886-2-2655-3965 E-mail: Nick_wu@sercomm.com
1 2 | Attestation (Channel and Mode Declaration) | Attestation Statements | 401.67 KiB | March 04 2019 |
Sercomm Corporation Taipei Office: 8F, No.3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. TEL: 886-2-2655-3988 FAX: 886-2-2655-3965 Date: April 1, 2019 We, Sercomm Corporation here declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: P27RC8335PRO If you should have any question(s) regarding this declaration, please dont hesitate to contact us. Thank you!
-----------------------------------------------------
Sercomm Corporation Nick Wu/ Engineer TEL: 886-2-2655-3988*2631 FAX: 886-2-2655-3965 E-mail: Nick_wu@sercomm.com
1 2 | Attestation (Label Location Declaration) | Attestation Statements | 96.85 KiB | March 04 2019 |
Sercomm Corporation Taipei Office: 8F, No.3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. TEL: 886-2-2655-3988 FAX: 886-2-2655-3965 Date: 2019-04-03 FCC ID: P27RC8335PRO To the attention of Federal Communications Commission Authorization and Evaluation Division Declaration letter for label requirement The label is permanent affixed in the bottom of the stand, and the mounting plate will be opened and not secured when sold. The users can see the label during the installation process. The mounting plate can be opened without any special tools. Sincerely yours,
-----------------------------------------------------
Sercomm Corporation Nick Wu/ Engineer TEL: 886-2-2655-3988*2631 FAX: 886-2-2655-3965 E-mail: Nick_wu@sercomm.com
1 2 | Confidentiality request(Long term) | Cover Letter(s) | 395.79 KiB | March 04 2019 |
Sercomm Corporation Taipei Office: 8F, No.3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. TEL: 886-2-2655-3988 FAX: 886-2-2655-3965 Date: 2019-04-01 FCC ID: P27RC8335PRO To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below:
Schematics Block Diagram Operational Description Software Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours,
-----------------------------------------------------
Sercomm Corporation Nick Wu/ Engineer TEL: 886-2-2655-3988*2631 FAX: 886-2-2655-3965 E-mail: Nick_wu@sercomm.com
1 2 | RF Exposure Info (MPE) rev | RF Exposure Info | 127.24 KiB | March 04 2019 |
RF Exposure Report Report No.: SA190225D05 FCC ID: P27RC8335PRO Test Model: RC8335PRO Received Date: Feb. 25, 2019 Test Date: Mar. 6 to 18, 2019 Issued Date: Mar. 22, 2019 Applicant: Sercomm Corp. Address: 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. (NanKang Software Park) Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan FCC Registration /
Designation Number: 198487 / TW2021
(R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA190225D05 Page No. 1 / 6 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 RF Exposure .......................................................................................................................................... 5 2 2.1 Limits For Maximum Permissible Exposure (MPE) ............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Calculation Result Of Maximum Conducted Power ............................................................................ 6 Report No.: SA190225D05 Page No. 2 / 6 Report Format Version: 6.1.1 Release Control Record Issue No. SA190225D05 Description Original release. Date Issued Mar. 22, 2019 Report No.: SA190225D05 Page No. 3 / 6 Report Format Version: 6.1.1 1 Certificate of Conformity Product: SmartThings Smart Camera, SmartThings Cam Brand: SmartThings, Sercomm Test Model: RC8335PRO Sample Status: Engineering sample Applicant: Sercomm Corp. Test Date: Mar. 6 to 18, 2019 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.1-1992 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the samples RF characteristics under the conditions specified in this report. Prepared by :
:
Approved by Annie Chang / Senior Specialist
, Date:
Mar. 22, 2019 Rex Lai / Associate Technical Manager
, Date:
Mar. 22, 2019 Report No.: SA190225D05 Page No. 4 / 6 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits For Maximum Permissible Exposure (MPE) Frequency Range
(MHz) 0.3-1.34 1.34-30 30-300 300-1500 1500-100,000 Electric Field Strength (V/m)
(mW/cm2) Limits For General Population / Uncontrolled Exposure Magnetic Field Strength (A/m) Power Density Average Time
(minutes) 614 824/f 27.5 1.63 2.19/f 0.073
(100)*
(180/f2)*
0.2 f/1500 1.0 30 30 30 30 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA190225D05 Page No. 5 / 6 Report Format Version: 6.1.1 2.4 Calculation Result Of Maximum Conducted Power Frequency Band
(MHz) 2412-2462 5180-5240 5745-5825 Max Power
(dBm) Antenna Gain
(dBi) Distance
(cm) Power Density
(mW/cm2) Limit
(mW/cm2) 28.65 21.13 21.17 5.63 5.82 7.09 20 20 20 0.5330 0.0986 0.1333 1 1 1 NOTE:
2.4GHz: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 5.63dBi 5.0GHz (5180-5240MHz): Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 5.82dBi 5.0GHz (5745-5825MHz): Directional gain =10 log[(10G1/20 + 10G2/20)2 / 2] = 7.09dBi 2.4GHz & 5GHz technologies cannot transmit at same time.
--- END ---
Report No.: SA190225D05 Page No. 6 / 6 Report Format Version: 6.1.1
1 2 | Test Report(NII) rev | Test Report | 1.04 MiB | March 04 2019 |
FCC Test Report Report No.: RF190225D05-1 FCC ID: P27RC8335PRO Test Model: RC8335PRO Received Date: Feb. 25, 2019 Test Date: Mar. 6 to 18, 2019 Issued Date: Mar. 22, 2019 Applicant: Sercomm Corp. Address: 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. (NanKang Software Park) Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan FCC Registration /
Designation Number: 198487 / TW2021
(R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF190225D05-1 Page No. 1 / 64 Report Format Version:6.1.2 Table of Contents 4 3 Release Control Record .................................................................................................................................. 4 Certificate of Conformity ...................................................................................................................... 5 1 Summary of Test Results ..................................................................................................................... 6 2 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 9 3.2.1 Test Mode Applicability and Tested Channel Detail ........................................................................... 10 3.3 Duty Cycle of Test Signal .................................................................................................................. 12 3.4 Description of Support Units ............................................................................................................. 13 3.4.1 Configuration of System under Test .................................................................................................. 13 3.5 General Description of Applied Standard .......................................................................................... 13 Test Types and Results ...................................................................................................................... 14 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 14 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 14 4.1.2 Test Instruments ................................................................................................................................ 15 4.1.3 Test Procedure .................................................................................................................................. 16 4.1.4 Deviation from Test Standard ............................................................................................................ 16 4.1.5 Test Setup .......................................................................................................................................... 17 4.1.6 EUT Operating Condition .................................................................................................................. 18 4.1.7 Test Results ....................................................................................................................................... 19 4.2 Conducted Emission Measurement .................................................................................................. 39 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 39 4.2.2 Test Instruments ................................................................................................................................ 39 4.2.3 Test Procedure .................................................................................................................................. 40 4.2.4 Deviation from Test Standard ............................................................................................................ 40 4.2.5 Test Setup .......................................................................................................................................... 40 4.2.6 EUT Operating Condition .................................................................................................................. 40 4.2.7 Test Results ....................................................................................................................................... 41 4.3 Transmit Power Measurment ............................................................................................................ 43 4.3.1 Limits of Transmit Power Measurement ............................................................................................ 43 4.3.2 Test Setup .......................................................................................................................................... 43 4.3.3 Test Instruments ................................................................................................................................ 43 4.3.4 Test Procedure .................................................................................................................................. 44 4.3.5 Deviation from Test Standard ............................................................................................................ 44 4.3.6 EUT Operating Condition .................................................................................................................. 44 4.3.7 Test Result ......................................................................................................................................... 45 4.4 Peak Power Spectral Density Measurement .................................................................................... 46 4.4.1 Limits of Peak Power Spectral Density Measurement ...................................................................... 50 4.4.2 Test Setup .......................................................................................................................................... 50 4.4.3 Test Instruments ................................................................................................................................ 50 4.4.4 Test Procedure .................................................................................................................................. 50 4.4.5 Deviation from Test Standard ............................................................................................................ 50 4.4.6 EUT Operating Condition .................................................................................................................. 50 4.4.7 Test Results ....................................................................................................................................... 51 4.5 Frequency Stability Measurement .................................................................................................... 55 4.5.1 Limits of Frequency Stability Measurement ...................................................................................... 55 4.5.2 Test Setup .......................................................................................................................................... 55 4.5.3 Test Instruments ................................................................................................................................ 55 4.5.4 Test Procedure .................................................................................................................................. 55 4.5.5 Deviation from Test Standard ............................................................................................................ 55 Report No.: RF190225D05-1 Page No. 2 / 64 Report Format Version:6.1.2 4.5.6 EUT Operating Condition .................................................................................................................. 55 4.5.7 Test Results ....................................................................................................................................... 56 4.6 6dB Bandwidth Measurment ............................................................................................................. 57 4.6.1 Limits of 6dB Bandwidth Measurement ............................................................................................. 57 4.6.2 Test Setup .......................................................................................................................................... 57 4.6.3 Test Instruments ................................................................................................................................ 57 4.6.4 Test Procedure .................................................................................................................................. 57 4.6.5 Deviation from Test Standard ............................................................................................................ 57 4.6.6 EUT Operating Condition .................................................................................................................. 57 4.6.7 Test Results ....................................................................................................................................... 58 5 Pictures of Test Arrangements .......................................................................................................... 60 Annex- Radiated Bandedge Measurement (For U-NII-3 band) .................................................................. 61 Appendix Information on the Testing Laboratories ................................................................................ 64 Report No.: RF190225D05-1 Page No. 3 / 64 Report Format Version:6.1.2 Release Control Record Issue No. RF190225D05-1 Description Original release. Date Issued Mar. 22, 2019 Report No.: RF190225D05-1 Page No. 4 / 64 Report Format Version:6.1.2 1 Certificate of Conformity Product: SmartThings Smart Camera, SmartThings Cam Brand: SmartThings, Sercomm Test Model: RC8335PRO Sample Status: Engineering sample Applicant: Sercomm Corp. Test Date: Mar. 6 to 18, 2019 Standard: 47 CFR FCC Part 15, Subpart E (Section 15.407) ANSI C63.10: 2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the samples RF characteristics under the conditions specified in this report. Prepared by :
:
Approved by Annie Chang / Senior Specialist
, Date:
Mar. 22, 2019 Rex Lai / Associate Technical Manager
, Date:
Mar. 22, 2019 Report No.: RF190225D05-1 Page No. 5 / 64 Report Format Version:6.1.2 2 Summary of Test Results FCC Clause 47 CFR FCC Part 15, Subpart E (Section 15.407) Test Item Result Remarks 15.407(b)(6) AC Power Conducted Emissions Pass 15.407(b)
(1/2/3/4(i/ii)/6) Radiated Emissions & Band Edge Measurement*
Pass Meet the requirement of limit. Minimum passing margin is -12.25dB at 0.16172MHz. Meet the requirement of limit. Minimum passing margin is -1.04dB at 5150.00MHz. 15.407(a)(1/2/3) Max Average Transmit Power Pass Meet the requirement of limit.
---
Occupied Bandwidth Measurement
-
Reference only. 15.407(a)(1/2/3) Peak Power Spectral Density 15.407(e) 15.407(g) 6dB bandwidth Frequency Stability 15.203 Antenna Requirement Pass Meet the requirement of limit. Pass Meet the requirement of limit. Pass Meet the requirement of limit.
(U-NII-3 Band only) Pass Antenna connector is I-PEX not a standard connector.
*For U-NII-3 band compliance with rule part 15.407(b)(4)(i), the OOBE test plots were recorded in Annex A. Note:
Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2:
Frequency 150kHz ~ 30MHz 9kHz ~ 30MHz 30MHz ~ 1000MHz Above 1GHz Expanded Uncertainty
(k=2) () 2.77 dB 2.38 dB 5.54 dB 5.48 dB Measurement Conducted Emissions at mains ports Radiated Emissions up to 1 GHz Radiated Emissions above 1 GHz 2.2 Modification Record There were no modifications required for compliance. Report No.: RF190225D05-1 Page No. 6 / 64 Report Format Version:6.1.2 3 General Information 3.1 General Description of EUT Product Brand Test Model Status of EUT Power Supply Rating Modulation Type Modulation Technology Transfer Rate Operating Frequency Number of Channel Output Power Antenna Type SmartThings Smart Camera, SmartThings Cam SmartThings, Sercomm RC8335PRO Engineering sample DC 12V from Adapter 64QAM, 16QAM, QPSK, BPSK for OFDM 256QAM for OFDM in 11ac mode only. OFDM 802.11a: 54/48/36/24/18/12/9/6Mbps 802.11n: up to 300Mbps 802.11ac: up to 866.7Mbps 5180 ~ 5240MHz, 5745 ~ 5825MHz 5180 ~ 5240MHz 4 for 802.11a, 802.11n (20MHz), 802.11ac (20MHz) 2 for 802.11n (40MHz), 802.11ac (40MHz) 1 for 802.11ac (80MHz) 5745 ~ 5825MHz 5 for 802.11a, 802.11n (20MHz) 802.11ac (20MHz) 2 for 802.11n (40MHz) 802.11ac (40MHz) 1 for 802.11ac (80MHz) 5180 ~ 5240MHz: 129.730mW 5745 ~ 5825MHz: 130.780mW 5180 ~ 5240MHz:
Ant.1: PCB dipole antenna with 2.85dBi gain Ant.2: PCB dipole antenna with 2.76dBi gain 5745 ~ 5825MHz:
Ant.1: PCB dipole antenna with 4.44dBi gain Ant.2: PCB dipole antenna with 3.71dBi gain I-PEX Adapter N/A Antenna Connector Accessory Device Data Cable Supplied Note:
1. The EUT provides 2 completed transmitters and 2 receivers. Modulation Mode TX FUNCTION 802.11a 802.11n (20MHz) 802.11n (40MHz) 802.11ac (20MHz) 802.11ac (40MHz) 802.11ac (80MHz) 1TX 2TX 2TX 2TX 2TX 2TX
* The modulation and bandwidth are similar for 802.11n mode for 20MHz / 40MHz and 802.11ac mode for 20MHz / 40MHz, therefore investigated worst case to representative mode in test report. (Final test mode refer section 3.2.1) Report No.: RF190225D05-1 Page No. 7 / 64 Report Format Version:6.1.2 2. The EUT uses following adapter. Brand Model Input Power Output Power Power Line APD WB-12G12FU 100-240V, 50-60Hz, 0.3A 12V, 1A AC 2 Pin, Non-shielded DC cable (3.0m) 3. 2.4GHz & 5GHz technologies cannot transmit at same time. 4. The above EUT information is declared by manufacturer and for more detailed features description, please refers to the manufacturer's specifications or user's manual. Report No.: RF190225D05-1 Page No. 8 / 64 Report Format Version:6.1.2 3.2 Description of Test Modes FOR 5180 ~ 5240MHz 4 channels are provided for 802.11a, 802.11n (20MHz), 802.11ac (20MHz):
Channel 36 40 Frequency 5180 MHz 5200 MHz Channel 44 48 2 channels are provided for 802.11n (40MHz), 802.11ac (40MHz):
Channel Channel Frequency 5190 MHz 46 38 1 channel is provided for 802.11ac (80MHz):
Channel 42 Frequency 5210MHz FOR 5745 ~ 5825MHz:
5 channels are provided for 802.11a, 802.11n (20MHz), 802.11ac (20MHz):
Channel 149 153 157 Frequency 5745MHz 5765MHz 5785MHz Channel 161 165 2 channels are provided for 802.11n (40MHz), 802.11ac (40MHz):
Channel Channel Frequency 5755MHz 159 151 Frequency 5220 MHz 5240 MHz Frequency 5230 MHz Frequency 5805MHz 5825MHz Frequency 5795MHz 1 channel is provided for 802.11ac (80MHz):
Channel 155 Frequency 5775MHz Report No.: RF190225D05-1 Page No. 9 / 64 Report Format Version:6.1.2 3.2.1 Test Mode Applicability and Tested Channel Detail EUT Configure Mode
-
Applicable To RE1G RE<1G PLC APCM
-
Description Where NOTE: The EUT had been pre-tested on the positioned of each 2 axis. The worst case was found when positioned on X-plane. RE<1G: Radiated Emission below 1GHz APCM: Antenna Port Conducted Measurement RE1G: Radiated Emission above 1GHz PLC: Power Line Conducted Emission Radiated Emission Test (Above 1GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Mode
-
-
-
-
-
-
-
-
Mode 802.11a 802.11ac (20MHz) 802.11ac (40MHz) 802.11ac (80MHz) 802.11a 802.11ac (20MHz) 802.11ac (40MHz) 802.11ac (80MHz) FREQ. Band
(MHz) Available Channel Tested Channel Modulation Technology 5180-5240 5745-5825 36 to 48 36 to 48 38 to 46 42 149 to 165 149 to 165 151 to 159 155 36, 40, 48 36, 40, 48 38, 46 42 149, 157, 165 149, 157, 165 151, 159 155 OFDM OFDM OFDM OFDM OFDM OFDM OFDM OFDM Modulation Type BPSK BPSK BPSK BPSK BPSK BPSK BPSK BPSK Data Rate
(Mbps) 6 6.5 13.5 29.3 6 6.5 13.5 29.3 Radiated Emission Test (Below 1GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Mode
-
-
Mode 802.11a 802.11a FREQ. Band
(MHz) Available Channel Tested Channel Modulation Technology 5180-5240 5745-5825 36 to 48 149 to 165 40 OFDM OFDM Modulation Type BPSK BPSK Data Rate
(Mbps) 6 6 Report No.: RF190225D05-1 Page No. 10 / 64 Report Format Version:6.1.2 Power Line Conducted Emission Test:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Mode
-
-
Mode 802.11a 802.11a FREQ. Band
(MHz) Available Channel Tested Channel Modulation Technology 5180-5240 5745-5825 36 to 48 149 to 165 40 OFDM OFDM Modulation Type BPSK BPSK Data Rate
(Mbps) 6 6 Antenna Port Conducted Measurement:
This item includes all test value of each mode, but only includes spectrum plot of worst value of each mode. Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Mode
-
-
-
-
-
-
-
-
Mode 802.11a 802.11ac (20MHz) 802.11ac (40MHz) 802.11ac (80MHz) 802.11a 802.11ac (20MHz) 802.11ac (40MHz) 802.11ac (80MHz) FREQ. Band
(MHz) Available Channel Tested Channel Modulation Technology 5180-5240 5745-5825 36 to 48 36 to 48 38 to 46 42 149 to 165 149 to 165 151 to 159 155 36, 40, 48 36, 40, 48 38, 46 42 149, 157, 165 149, 157, 165 151, 159 155 OFDM OFDM OFDM OFDM OFDM OFDM OFDM OFDM Modulation Type BPSK BPSK BPSK BPSK BPSK BPSK BPSK BPSK Data Rate
(Mbps) 6 6.5 13.5 29.3 6 6.5 13.5 29.3 Test Condition:
Applicable To Environmental Conditions RE1G RE<1G PLC APCM 24deg. C, 71%RH 24deg. C, 71%RH 25deg. C, 75%RH 25deg. C, 76%RH Input Power 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz Tested By Ian Chang Ian Chang Dalen Dai Saxon Lee Report No.: RF190225D05-1 Page No. 11 / 64 Report Format Version:6.1.2 3.3 Duty Cycle of Test Signal Duty cycle of test signal is < 98 %, duty factor is required 802.11a: Duty cycle = 2.087/2.222 = 0.939, Duty factor = 10 * log(1/0.939) = 0.27 802.11ac (20MHz): Duty cycle = 1.94/1.99 = 0.975, Duty factor = 10 * log(1/0.975) = 0.11 802.11ac (40MHz): Duty cycle = 0.955/1.080 = 0.884, Duty factor = 10 * log(1/0.884) = 0.53 802.11ac (80MHz): Duty cycle = 0.468/0.555 = 0.843, Duty factor = 10 * log( 1/0.843) = 0.74 802.11a 802.11ac (20MHz) 802.11ac (40MHz) 802.11ac (80MHz) Report No.: RF190225D05-1 Page No. 12 / 64 Report Format Version:6.1.2 3.4 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Descriptions Qty. Length (m) 1. DC cable 3 Note: The core(s) is(are) originally attached to the cable(s). 1 Cores (Qty.) Remarks 0 Supplied by client Shielding
(Yes/No) N 3.4.1 Configuration of System under Test 3.5 General Description of Applied Standard Adapter (EUT) 120Vac DC in 1 EUT The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards:
FCC Part 15, Subpart E (15.407) KDB 789033 D02 General UNII Test Procedure New Rules v02r01 KDB 662911 D01 Multiple Transmitter Output v02r01 ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. Report No.: RF190225D05-1 Page No. 13 / 64 Report Format Version:6.1.2 Test Types and Results 4 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Frequencies
(MHz) Field Strength
(microvolts/meter) Measurement Distance (meters) 0.009 ~ 0.490 0.490 ~ 1.705 1.705 ~ 30.0 30 ~ 88 88 ~ 216 216 ~ 960 Above 960 2400/F(kHz) 24000/F(kHz) 30 100 150 200 500 300 30 30 3 3 3 3 NOTE:
1. 2. 3. The lower limit shall apply at the transition frequencies. Emission level (dBuV/m) = 20 log Emission level (uV/m). For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Limits of unwanted emission out of the restricted bands Applicable To 789033 D02 General UNII Test Procedure New Rules v02r01 Limit Field Strength at 3m PK:74 (dBV/m) AV:54 (dBV/m) Frequency Band Applicable To EIRP Limit Equivalent Field Strength at 3m 5150~5250 MHz 5250~5350 MHz 5470~5725 MHz 15.407(b)(1) 15.407(b)(2) 15.407(b)(3) 5725~5850 MHz 15.407(b)(4)(i) PK:-27 (dBm/MHz) PK:68.2(dBV/m) PK:-27 (dBm/MHz) *1 PK:10 (dBm/MHz) *2 PK:15.6 (dBm/MHz) *3 PK:27 (dBm/MHz) *4 PK: 68.2(dBV/m) *1 PK:105.2 (dBV/m) *2 PK: 110.8(dBV/m) *3 PK:122.2 (dBV/m) *4 15.407(b)(4)(ii) Emission limits in section 15.247(d)
*1 beyond 75 MHz or more above of the band edge.
*3 below the band edge increasing linearly to a level of 15.6 dBm/MHz at 5 MHz above.
*2 below the band edge increasing linearly to 10 dBm/MHz at 25 MHz above.
*4 from 5 MHz above or below the band edge increasing linearly to a level of 27 dBm/MHz at the band edge. Note:
The following formula is used to convert the equipment isotropic radiated power (eirp) to field strength:
E =
V/m, where P is the eirp (Watts). 30 P 1000000 3 Report No.: RF190225D05-1 Page No. 14 / 64 Report Format Version:6.1.2 4.1.2 Test Instruments DESCRIPTION &
MANUFACTURER HP Preamplifier HP Preamplifier MITEQ Preamplifier Agilent TEST RECEIVER Schwarzbeck Antenna Schwarzbeck Antenna Schwarzbeck Horn Antenna Schwarzbeck Horn Antenna ADT. Turn Table ADT. Tower Software SUHNER RF cable With 4dB PAD SUHNER RF cable With 3/4dB PAD KEYSIGHT MIMO Powermeasurement Test set KEYSIGHT Spectrum Analyzer Loop Antenna EMCI EMCO Horn Antenna Highpass filter Wainwright Instruments ROHDE & SCHWARZ Spectrum Analyzer Anritsu Power Sensor Anritsu Power Meter AMF-6F-260400-33-8P MODEL NO. 8447D 8449B N9038A VULB 9168 VHBA 9123 BBHA-9170 BBHA 9120-D1 TT100 AT100 Radiated_V7.6.15.9.5 SERIAL NO. 2432A03504 3008A01201 892164 MY51210129 139 480 212 D130 0306 0306 NA CALIBRATED CALIBRATED DATE UNTIL Feb. 19, 2020 Feb. 20, 2019 Feb. 20, 2020 Feb. 21, 2019 Feb. 20, 2019 Feb. 19, 2020 Mar. 05, 2019 Mar. 04, 2020 Nov. 26, 2018 Nov. 25, 2019 May 19, 2017 May 18, 2019 Nov. 25, 2018 Nov. 24, 2019 Nov. 25, 2018 Nov. 24, 2019 NA NA NA NA NA NA SF102 SF102 Cable-CH6-01 Aug. 13, 2018 Aug. 12, 2019 Cable-CH8-3.6m Aug. 13, 2018 Aug. 12, 2019 U2021XA U2021XA-001 Jun. 4, 2018 Jun. 3, 2019 N9030A LPA600 3115 WHK 3.1/18G-10SS MY54490260 270 00028257 SN 8 Aug. 3, 2018 Aug. 2, 2019 Aug. 11, 2017 Aug. 10, 2019 Nov. 25, 2018 Nov. 24, 2019 NA NA FSV40 MA2411B ML2495A 101042 Sep. 27, 2018 Sep. 26, 2019 0738404 Apr. 26, 2018 Apr. 25, 2019 0842014 Apr. 26, 2018 Apr. 25, 2019 NOTE: 1. The calibration interval of the above test instruments is 12/24 months. And the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna and HP preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3. The test was performed in Chamber No. 6. 4. The Industry Canada Reference No. IC 7450E-6. Report No.: RF190225D05-1 Page No. 15 / 64 Report Format Version:6.1.2 4.1.3 Test Procedure For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Parallel, perpendicular, and ground-parallel orientations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. NOTE:
1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum f. hold mode when the test frequency is below 1 GHz. The test-receiver system was set to peak and average detects function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note:
1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-
peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 1/T
(Duty cycle < 98%) or 10Hz (Duty cycle 98%) for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF190225D05-1 Page No. 16 / 64 Report Format Version:6.1.2 4.1.5 Test Setup For Radiated emission below 30MHz 1 m EUT&
Support Units 80cm 3m Turn Table Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz EUT&
Support Units 80cm 3m 10m Turn Table Ant. Tower 1-4m Variable Ground Plane Test Receiver Report No.: RF190225D05-1 Page No. 17 / 64 Report Format Version:6.1.2 For Radiated emission above 1GHz EUT&
Support Units 3m Ant. Tower 1-4m Variable Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Condition Set the EUT under transmission condition continuously at specific channel frequency. Report No.: RF190225D05-1 Page No. 18 / 64 Report Format Version:6.1.2 4.1.7 Test Results Above 1GHz Data:
802.11a CHANNEL TX Channel 36 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV) NO. FREQ.
(MHz) 1 2 3 4 5 5150.00 5150.00
*5180.00
*5180.00
#10360.00 NO. FREQ.
(MHz) 1 2 3 4 5 5150.00 5150.00
*5180.00
*5180.00
#10360.00 REMARKS:
(dB) LIMIT MARGIN
(dBuV/m)
-3.03
-1.07 74.00 54.00 ANTENNA HEIGHT TABLE ANGLE
(Degree)
(m) 3.01 H 3.01 H 3.01 H 3.01 H 1.79 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW LEVEL VALUE
(dBuV/m)
(dBuV) 70.97 PK 63.76 52.93 AV 45.72 114.30 PK 107.05 104.33 AV 97.08 60.27 PK 43.13 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 60.57 43.96 105.31 94.93 42.16 LEVEL
(dBuV/m) 67.78 PK 51.17 AV 112.56 PK 102.18 AV 59.30 PK
(m) 2.18 V 2.18 V 2.18 V 2.18 V 1.62 V TABLE ANGLE
(Degree) ANTENNA HEIGHT 101 101 101 101 20 96 96 96 96 220 74.00 54.00
-6.22
-2.83
(dBuV/m) MARGIN LIMIT 68.20 68.20
-8.90
-7.93
(dB) CORRECTION FACTOR
(dB/m) 7.21 7.21 7.25 7.25 17.14 CORRECTION FACTOR
(dB/m) 7.21 7.21 7.25 7.25 17.14 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF190225D05-1 Page No. 19 / 64 Report Format Version:6.1.2 CHANNEL TX Channel 40 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 118.20 PK 110.94 107.51 AV 100.25 61.00 PK 43.66 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 108.88 98.63 42.66 LEVEL
(dBuV/m) 116.14 PK 105.89 AV 60.00 PK
(m) 2.63 H 2.63 H 1.64 H
(m) 2.20 V 2.20 V 1.89 V TABLE ANGLE
(Degree) ANTENNA HEIGHT 103 103 127 91 91 169
(dBuV/m) MARGIN LIMIT 68.20 68.20
-8.20
-7.20
(dB) CORRECTION FACTOR
(dB/m) 7.26 7.26 17.34 CORRECTION FACTOR
(dB/m) 7.26 7.26 17.34 NO. FREQ.
(MHz) 1 2 3
*5200.00
*5200.00
#10400.00 NO. FREQ.
(MHz) 1 2 3
*5200.00
*5200.00
#10400.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF190225D05-1 Page No. 20 / 64 Report Format Version:6.1.2 CHANNEL TX Channel 48 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN
(dBuV/m) 74.00 54.00 68.20 ANTENNA HEIGHT TABLE ANGLE
(Degree)
(m) 2.98 H 2.98 H 2.98 H 2.98 H 1.63 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 117.25 PK 110.29 106.85 AV 99.89 61.77 PK 54.40 47.88 AV 40.51 61.31 PK 43.61 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 108.75 98.28 53.87 40.03 42.88 LEVEL
(dBuV/m) 115.71 PK 105.24 AV 61.24 PK 47.40 AV 60.58 PK
(m) 2.19 V 2.19 V 2.19 V 2.19 V 1.98 V TABLE ANGLE
(Degree) ANTENNA HEIGHT 106 106 106 106 261 107 107 107 107 128
-12.76
-6.60
-7.62
-12.23
-6.12
-6.89 74.00 54.00 68.20
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m) 6.96 6.96 7.37 7.37 17.70 CORRECTION FACTOR
(dB/m) 6.96 6.96 7.37 7.37 17.70 NO. FREQ.
(MHz) 1 2 3 4 5
*5240.00
*5240.00 5350.00 5350.00
#10480.00 NO. FREQ.
(MHz) 1 2 3 4 5
*5240.00
*5240.00 5350.00 5350.00
#10480.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF190225D05-1 Page No. 21 / 64 Report Format Version:6.1.2 CHANNEL TX Channel 149 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB)
-5.44 68.34 LIMIT MARGIN
(dBuV/m) 68.20 74.00 54.00 ANTENNA HEIGHT TABLE ANGLE
(Degree)
(m) 3.05 H 3.05 H 3.05 H 3.05 H 1.69 H 1.69 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 62.90 PK 55.47 110.18 PK 102.59 100.16 AV 92.57 61.10 PK 53.00 61.63 PK 43.56 45.51 AV 27.44 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 54.02 100.16 90.09 52.16 42.51 26.35 LEVEL
(dBuV/m) 61.45 PK 107.75 PK 97.68 AV 60.32 PK 60.58 PK 44.42 AV
(m) 2.20 V 2.20 V 2.20 V 2.20 V 1.82 V 1.82 V TABLE ANGLE
(Degree) 100 100 100 100 87 87 103 103 103 103 236 236 ANTENNA HEIGHT
-7.10
-12.37
-8.49
-7.88
-13.42
-9.58 68.20 74.00 54.00
(dBuV/m) MARGIN
-11.10 LIMIT 72.55
(dB) CORRECTION FACTOR
(dB/m) 7.43 7.59 7.59 8.10 18.07 18.07 CORRECTION FACTOR
(dB/m) 7.43 7.59 7.59 8.16 18.07 18.07 NO. FREQ.
(MHz) 1 2 3 4 5 6
#5650.19
*5745.00
*5745.00
#5951.14 11490.00 11490.00 NO. FREQ.
(MHz) 1 2 3 4 5 6
#5655.88
*5745.00
*5745.00
#5932.14 11490.00 11490.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF190225D05-1 Page No. 22 / 64 Report Format Version:6.1.2 CHANNEL TX Channel 157 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB)
-8.18 68.20 LIMIT MARGIN
(dBuV/m) 68.20 74.00 54.00 ANTENNA HEIGHT TABLE ANGLE
(Degree)
(m) 3.02 H 3.02 H 3.02 H 3.02 H 1.68 H 1.68 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 60.02 PK 52.52 110.98 PK 103.24 101.31 AV 93.57 61.23 PK 53.12 61.64 PK 43.66 45.89 AV 27.91 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 53.53 101.25 91.16 51.55 42.66 26.69 LEVEL
(dBuV/m) 61.11 PK 108.99 PK 98.90 AV 59.68 PK 60.64 PK 44.67 AV
(m) 2.19 V 2.19 V 2.19 V 2.19 V 1.45 V 1.45 V TABLE ANGLE
(Degree) 110 110 110 110 19 19 ANTENNA HEIGHT
-6.97
-12.36
-8.11
-8.52
-13.36
-9.33 95 95 95 95 68 68 68.20 74.00 54.00
(dBuV/m) MARGIN LIMIT 68.20
-7.09
(dB) CORRECTION FACTOR
(dB/m) 7.50 7.74 7.74 8.11 17.98 17.98 CORRECTION FACTOR
(dB/m) 7.58 7.74 7.74 8.13 17.98 17.98 NO. FREQ.
(MHz) 1 2 3 4 5 6
#5636.65
*5785.00
*5785.00
#5948.30 11570.00 11570.00 NO. FREQ.
(MHz) 1 2 3 4 5 6
#5618.83
*5785.00
*5785.00
#5940.05 11570.00 11570.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF190225D05-1 Page No. 23 / 64 Report Format Version:6.1.2 CHANNEL TX Channel 165 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB)
-7.93 68.20 LIMIT MARGIN
(dBuV/m) 68.20 74.00 54.00 ANTENNA HEIGHT TABLE ANGLE
(Degree)
(m) 3.07 H 3.07 H 3.07 H 3.07 H 1.72 H 1.72 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 60.27 PK 52.72 111.63 PK 103.71 101.54 AV 93.62 60.69 PK 52.60 61.21 PK 43.49 44.91 AV 27.19 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 52.92 101.42 91.66 54.50 42.22 26.43 LEVEL
(dBuV/m) 60.47 PK 109.34 PK 99.58 AV 62.65 PK 59.94 PK 44.15 AV
(m) 2.01 V 2.01 V 2.01 V 2.01 V 1.27 V 1.27 V TABLE ANGLE
(Degree) 108 108 108 108 155 155 ANTENNA HEIGHT
-5.55
-14.06
-9.85
-7.51
-12.79
-9.09 93 93 93 93 88 88 68.20 74.00 54.00
(dBuV/m) MARGIN LIMIT 68.20
-7.73
(dB) CORRECTION FACTOR
(dB/m) 7.55 7.92 7.92 8.09 17.72 17.72 CORRECTION FACTOR
(dB/m) 7.55 7.92 7.92 8.15 17.72 17.72 NO. FREQ.
(MHz) 1 2 3 4 5 6
#5624.36
*5825.00
*5825.00
#5967.30 11650.00 11650.00 NO. FREQ.
(MHz) 1 2 3 4 5 6
#5625.63
*5825.00
*5825.00
#5931.03 11650.00 11650.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF190225D05-1 Page No. 24 / 64 Report Format Version:6.1.2 802.11ac (20MHz) CHANNEL TX Channel 36 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV) NO. FREQ.
(MHz) 1 2 3 4 5 5150.00 5150.00
*5180.00
*5180.00
#10360.00 NO. FREQ.
(MHz) 1 2 3 4 5 5150.00 5150.00
*5180.00
*5180.00
#10360.00 REMARKS:
(dB) LIMIT MARGIN
(dBuV/m)
-4.76
-3.31 74.00 54.00 ANTENNA HEIGHT TABLE ANGLE
(Degree)
(m) 1.99 H 1.99 H 1.99 H 1.99 H 1.66 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW LEVEL VALUE
(dBuV/m)
(dBuV) 69.24 PK 62.03 50.69 AV 43.48 112.71 PK 105.46 102.96 AV 95.71 60.79 PK 43.65 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 57.35 41.46 104.55 93.96 42.18 LEVEL
(dBuV/m) 64.56 PK 48.67 AV 111.80 PK 101.21 AV 59.32 PK
(m) 3.08 V 3.08 V 3.08 V 3.08 V 1.90 V TABLE ANGLE
(Degree) ANTENNA HEIGHT 269 269 269 269 139 53 53 53 53 208 74.00 54.00
-9.44
-5.33
(dBuV/m) MARGIN LIMIT 68.20 68.20
-8.88
-7.41
(dB) CORRECTION FACTOR
(dB/m) 7.21 7.21 7.25 7.25 17.14 CORRECTION FACTOR
(dB/m) 7.21 7.21 7.25 7.25 17.14 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF190225D05-1 Page No. 25 / 64 Report Format Version:6.1.2 CHANNEL TX Channel 40 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 113.04 PK 105.78 102.83 AV 95.57 60.82 PK 43.48 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 104.71 94.23 42.51 LEVEL
(dBuV/m) 111.97 PK 101.49 AV 59.85 PK
(m) 1.98 H 1.98 H 1.67 H
(m) 3.10 V 3.10 V 1.89 V TABLE ANGLE
(Degree) ANTENNA HEIGHT 261 261 128 60 60 251
(dBuV/m) MARGIN LIMIT 68.20 68.20
-8.35
-7.38
(dB) CORRECTION FACTOR
(dB/m) 7.26 7.26 17.34 CORRECTION FACTOR
(dB/m) 7.26 7.26 17.34 NO. FREQ.
(MHz) 1 2 3
*5200.00
*5200.00
#10400.00 NO. FREQ.
(MHz) 1 2 3
*5200.00
*5200.00
#10400.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF190225D05-1 Page No. 26 / 64 Report Format Version:6.1.2 CHANNEL TX Channel 48 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN
(dBuV/m) 74.00 54.00 68.20 ANTENNA HEIGHT TABLE ANGLE
(Degree)
(m) 1.97 H 1.97 H 1.97 H 1.97 H 1.66 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 112.65 PK 105.69 102.52 AV 95.56 61.00 PK 53.63 47.72 AV 40.35 60.97 PK 43.27 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 104.25 93.75 53.21 39.82 42.61 LEVEL
(dBuV/m) 111.21 PK 100.71 AV 60.58 PK 47.19 AV 60.31 PK
(m) 3.12 V 3.12 V 3.12 V 3.12 V 1.96 V TABLE ANGLE
(Degree) ANTENNA HEIGHT 268 268 268 268 171 58 58 58 58 188
-13.42
-6.81
-7.89
-13.00
-6.28
-7.23 74.00 54.00 68.20
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m) 6.96 6.96 7.37 7.37 17.70 CORRECTION FACTOR
(dB/m) 6.96 6.96 7.37 7.37 17.70 NO. FREQ.
(MHz) 1 2 3 4 5
*5240.00
*5240.00 5350.00 5350.00
#10480.00 NO. FREQ.
(MHz) 1 2 3 4 5
*5240.00
*5240.00 5350.00 5350.00
#10480.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF190225D05-1 Page No. 27 / 64 Report Format Version:6.1.2 CHANNEL TX Channel 149 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB)
-9.17 68.20 LIMIT MARGIN
(dBuV/m) 68.20 74.00 54.00 ANTENNA HEIGHT TABLE ANGLE
(Degree)
(m) 2.91 H 2.91 H 2.91 H 2.91 H 1.91 H 1.91 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 59.03 PK 51.59 110.93 PK 103.34 101.04 AV 93.45 60.29 PK 52.14 61.29 PK 43.22 45.63 AV 27.56 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 51.94 101.00 91.44 52.40 42.21 26.55 LEVEL
(dBuV/m) 59.49 PK 108.59 PK 99.03 AV 60.54 PK 60.28 PK 44.62 AV
(m) 1.98 V 1.98 V 1.98 V 1.98 V 1.39 V 1.39 V TABLE ANGLE
(Degree) 102 102 102 102 258 258 ANTENNA HEIGHT
-7.66
-13.72
-9.38
-7.91
-12.71
-8.37 89 89 89 89 39 39 68.20 74.00 54.00
(dBuV/m) MARGIN LIMIT 68.20
-8.71
(dB) CORRECTION FACTOR
(dB/m) 7.44 7.59 7.59 8.15 18.07 18.07 CORRECTION FACTOR
(dB/m) 7.55 7.59 7.59 8.14 18.07 18.07 NO. FREQ.
(MHz) 1 2 3 4 5 6
#5649.09
*5745.00
*5745.00
#5934.13 11490.00 11490.00 NO. FREQ.
(MHz) 1 2 3 4 5 6
#5627.40
*5745.00
*5745.00
#5938.31 11490.00 11490.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF190225D05-1 Page No. 28 / 64 Report Format Version:6.1.2 CHANNEL TX Channel 157 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB)
-7.86 68.20 LIMIT MARGIN
(dBuV/m) 68.20 74.00 54.00 ANTENNA HEIGHT TABLE ANGLE
(Degree)
(m) 2.94 H 2.94 H 2.94 H 2.94 H 1.62 H 1.62 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 60.34 PK 52.77 111.36 PK 103.62 101.03 AV 93.29 60.62 PK 52.52 61.57 PK 43.59 45.29 AV 27.31 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 52.28 101.24 91.34 52.22 42.19 26.66 LEVEL
(dBuV/m) 59.71 PK 108.98 PK 99.08 AV 60.35 PK 60.17 PK 44.64 AV
(m) 1.96 V 1.96 V 1.96 V 1.96 V 1.42 V 1.42 V TABLE ANGLE
(Degree) 105 105 105 105 186 186 ANTENNA HEIGHT
-7.85
-13.83
-9.36
-7.58
-12.43
-8.71 96 96 96 96 55 55 68.20 74.00 54.00
(dBuV/m) MARGIN LIMIT 69.44
-9.73
(dB) CORRECTION FACTOR
(dB/m) 7.57 7.74 7.74 8.10 17.98 17.98 CORRECTION FACTOR
(dB/m) 7.43 7.74 7.74 8.13 17.98 17.98 NO. FREQ.
(MHz) 1 2 3 4 5 6
#5622.12
*5785.00
*5785.00
#5961.68 11570.00 11570.00 NO. FREQ.
(MHz) 1 2 3 4 5 6
#5651.67
*5785.00
*5785.00
#5941.07 11570.00 11570.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF190225D05-1 Page No. 29 / 64 Report Format Version:6.1.2 CHANNEL TX Channel 165 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB)
-8.76 68.20 LIMIT MARGIN
(dBuV/m) 68.20 74.00 54.00 ANTENNA HEIGHT TABLE ANGLE
(Degree)
(m) 2.97 H 2.97 H 2.97 H 2.97 H 1.57 H 1.57 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 59.44 PK 51.88 111.37 PK 103.45 101.58 AV 93.66 60.72 PK 52.60 61.57 PK 43.85 45.21 AV 27.49 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 52.10 101.68 91.54 52.50 42.84 26.94 LEVEL
(dBuV/m) 59.67 PK 109.60 PK 99.46 AV 60.65 PK 60.56 PK 44.66 AV
(m) 2.06 V 2.06 V 2.06 V 2.06 V 1.55 V 1.55 V TABLE ANGLE
(Degree) 101 101 101 101 148 148 102 102 102 102 88 88 ANTENNA HEIGHT
-7.48
-12.43
-8.79
-7.55
-13.44
-9.34 68.20 74.00 54.00
(dBuV/m) MARGIN LIMIT 68.20
-8.53
(dB) CORRECTION FACTOR
(dB/m) 7.56 7.92 7.92 8.12 17.72 17.72 CORRECTION FACTOR
(dB/m) 7.57 7.92 7.92 8.15 17.72 17.72 NO. FREQ.
(MHz) 1 2 3 4 5 6
#5623.13
*5825.00
*5825.00
#5947.80 11650.00 11650.00 NO. FREQ.
(MHz) 1 2 3 4 5 6
#5621.50
*5825.00
*5825.00
#5934.70 11650.00 11650.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF190225D05-1 Page No. 30 / 64 Report Format Version:6.1.2 802.11ac (40MHz) CHANNEL TX Channel 38 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV) NO. FREQ.
(MHz) 1 2 3 4 5 5150.00 5150.00
*5190.00
*5190.00
#10380.00 NO. FREQ.
(MHz) 1 2 3 4 5 5150.00 5150.00
*5190.00
*5190.00
#10380.00 REMARKS:
(dB) LIMIT MARGIN
(dBuV/m)
-5.75
-1.21 74.00 54.00 ANTENNA HEIGHT TABLE ANGLE
(Degree)
(m) 1.98 H 1.98 H 1.98 H 1.98 H 1.57 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW LEVEL VALUE
(dBuV/m)
(dBuV) 68.25 PK 61.04 52.79 AV 45.58 105.68 PK 98.43 96.16 AV 88.91 59.79 PK 42.55 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 55.40 41.67 96.40 86.28 41.29 LEVEL
(dBuV/m) 62.61 PK 48.88 AV 103.65 PK 93.53 AV 58.53 PK
(m) 2.94 V 2.94 V 2.94 V 2.94 V 1.72 V TABLE ANGLE
(Degree) ANTENNA HEIGHT 266 266 266 266 184 63 63 63 63 193
-11.39
-5.12 74.00 54.00
(dBuV/m) MARGIN LIMIT 68.20 68.20
-9.67
-8.41
(dB) CORRECTION FACTOR
(dB/m) 7.21 7.21 7.25 7.25 17.24 CORRECTION FACTOR
(dB/m) 7.21 7.21 7.25 7.25 17.24 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF190225D05-1 Page No. 31 / 64 Report Format Version:6.1.2 CHANNEL TX Channel 46 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN
(dBuV/m) 74.00 54.00 68.20 ANTENNA HEIGHT TABLE ANGLE
(Degree)
(m) 2.13 H 2.13 H 2.13 H 2.13 H 1.66 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 110.52 PK 103.48 100.24 AV 93.20 62.40 PK 55.03 47.78 AV 40.41 61.13 PK 43.52 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 101.37 90.93 54.64 40.03 42.22 LEVEL
(dBuV/m) 108.41 PK 97.97 AV 62.01 PK 47.40 AV 59.83 PK
(m) 3.01 V 3.01 V 3.01 V 3.01 V 1.82 V TABLE ANGLE
(Degree) ANTENNA HEIGHT 265 265 265 265 139 59 59 59 59 159
-11.99
-6.60
-8.37
-11.60
-6.22
-7.07 74.00 54.00 68.20
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m) 7.04 7.04 7.37 7.37 17.61 CORRECTION FACTOR
(dB/m) 7.04 7.04 7.37 7.37 17.61 NO. FREQ.
(MHz) 1 2 3 4 5
*5230.00
*5230.00 5350.00 5350.00
#10460.00 NO. FREQ.
(MHz) 1 2 3 4 5
*5230.00
*5230.00 5350.00 5350.00
#10460.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF190225D05-1 Page No. 32 / 64 Report Format Version:6.1.2 CHANNEL TX Channel 151 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB)
-8.57 68.20 LIMIT MARGIN
(dBuV/m) 68.20 74.00 54.00 ANTENNA HEIGHT TABLE ANGLE
(Degree)
(m) 2.54 H 2.54 H 2.54 H 2.54 H 1.84 H 1.84 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 59.63 PK 52.11 107.50 PK 99.89 97.49 AV 89.88 60.87 PK 52.75 61.45 PK 43.36 45.33 AV 27.24 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 51.88 97.88 87.69 51.77 42.26 26.19 LEVEL
(dBuV/m) 59.38 PK 105.49 PK 95.30 AV 59.86 PK 60.35 PK 44.28 AV
(m) 2.89 V 2.89 V 2.89 V 2.89 V 1.45 V 1.45 V TABLE ANGLE
(Degree) 288 288 288 288 154 154 ANTENNA HEIGHT
-8.34
-13.65
-9.72
-7.33
-12.55
-8.67 90 90 90 90 99 99 68.20 74.00 54.00
(dBuV/m) MARGIN LIMIT 68.20
-8.82
(dB) CORRECTION FACTOR
(dB/m) 7.52 7.61 7.61 8.12 18.09 18.09 CORRECTION FACTOR
(dB/m) 7.50 7.61 7.61 8.09 18.09 18.09 NO. FREQ.
(MHz) 1 2 3 4 5 6
#5631.83
*5755.00
*5755.00
#5941.34 11510.00 11510.00 NO. FREQ.
(MHz) 1 2 3 4 5 6
#5635.62
*5755.00
*5755.00
#5966.88 11510.00 11510.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF190225D05-1 Page No. 33 / 64 Report Format Version:6.1.2 CHANNEL TX Channel 159 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB)
-8.57 68.20 LIMIT MARGIN
(dBuV/m) 68.20 74.00 54.00 ANTENNA HEIGHT TABLE ANGLE
(Degree)
(m) 2.58 H 2.58 H 2.58 H 2.58 H 1.68 H 1.68 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 59.63 PK 52.05 107.78 PK 99.99 97.63 AV 89.84 61.05 PK 52.90 61.62 PK 43.68 45.52 AV 27.58 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 52.76 97.68 87.53 52.84 42.88 26.69 LEVEL
(dBuV/m) 60.26 PK 105.47 PK 95.32 AV 60.98 PK 60.82 PK 44.63 AV
(m) 2.94 V 2.94 V 2.94 V 2.94 V 1.55 V 1.55 V TABLE ANGLE
(Degree) 290 290 290 290 159 159 ANTENNA HEIGHT
-7.22
-13.18
-9.37
-7.15
-12.38
-8.48 96 96 96 96 45 45 68.20 74.00 54.00
(dBuV/m) MARGIN LIMIT 68.20
-7.94
(dB) CORRECTION FACTOR
(dB/m) 7.58 7.79 7.79 8.15 17.94 17.94 CORRECTION FACTOR
(dB/m) 7.50 7.79 7.79 8.14 17.94 17.94 NO. FREQ.
(MHz) 1 2 3 4 5 6
#5620.67
*5795.00
*5795.00
#5935.45 11590.00 11590.00 NO. FREQ.
(MHz) 1 2 3 4 5 6
#5633.93
*5795.00
*5795.00
#5937.99 11590.00 11590.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF190225D05-1 Page No. 34 / 64 Report Format Version:6.1.2 802.11ac (80MHz) CHANNEL TX Channel 42 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV) NO. FREQ.
(MHz) 1 2 3 4 5 6 7 5150.00 5150.00
*5210.00
*5210.00 5350.00 5350.00
#10420.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 5150.00 5150.00
*5210.00
*5210.00 5350.00 5350.00
#10420.00 REMARKS:
(dB) LIMIT MARGIN
(dBuV/m)
-8.00
-1.04 74.00 54.00 74.00 54.00 68.20 ANTENNA HEIGHT TABLE ANGLE
(Degree) 265 265 265 265 265 265 108
(m) 2.01 H 2.01 H 2.01 H 2.01 H 2.01 H 2.01 H 1.69 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW LEVEL VALUE
(dBuV/m)
(dBuV) 66.00 PK 58.79 52.96 AV 45.75 104.02 PK 96.84 93.90 AV 86.72 61.25 PK 53.88 48.19 AV 40.82 60.06 PK 42.63 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 55.63 43.33 95.22 85.76 53.54 40.94 41.22 LEVEL
(dBuV/m) 62.84 PK 50.54 AV 102.40 PK 92.94 AV 60.91 PK 48.31 AV 58.65 PK
(m) 1.99 V 1.99 V 1.99 V 1.99 V 1.99 V 1.99 V 1.78 V 190 190 190 190 190 190 199 TABLE ANGLE
(Degree) ANTENNA HEIGHT
-13.09
-5.69
-9.55
-12.75
-5.81
-8.14 74.00 54.00 68.20
-11.16
-3.46 74.00 54.00
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m) 7.21 7.21 7.18 7.18 7.37 7.37 17.43 CORRECTION FACTOR
(dB/m) 7.21 7.21 7.18 7.18 7.37 7.37 17.43 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF190225D05-1 Page No. 35 / 64 Report Format Version:6.1.2 CHANNEL TX Channel 155 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB)
-4.69 68.20 LIMIT MARGIN
(dBuV/m) 68.20 74.00 54.00 ANTENNA HEIGHT TABLE ANGLE
(Degree)
(m) 2.60 H 2.60 H 2.60 H 2.60 H 1.66 H 1.66 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 63.51 PK 56.07 106.23 PK 98.53 96.16 AV 88.46 62.16 PK 53.99 61.44 PK 43.42 45.90 AV 27.88 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 53.86 96.76 86.52 53.68 42.52 26.18 LEVEL
(dBuV/m) 61.36 PK 104.46 PK 94.22 AV 61.86 PK 60.54 PK 44.20 AV
(m) 2.98 V 2.98 V 2.98 V 2.98 V 1.48 V 1.48 V TABLE ANGLE
(Degree) 280 280 280 280 117 117 ANTENNA HEIGHT
-6.34
-13.46
-9.80
-6.04
-12.56
-8.10 91 91 91 91 69 69 68.20 74.00 54.00
(dBuV/m) MARGIN LIMIT 68.20
-6.84
(dB) CORRECTION FACTOR
(dB/m) 7.44 7.70 7.70 8.17 18.02 18.02 CORRECTION FACTOR
(dB/m) 7.50 7.70 7.70 8.18 18.02 18.02 NO. FREQ.
(MHz) 1 2 3 4 5 6
#5648.06
*5775.00
*5775.00
#5927.32 11550.00 11550.00 NO. FREQ.
(MHz) 1 2 3 4 5 6
#5634.27
*5775.00
*5775.00
#5925.77 11550.00 11550.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF190225D05-1 Page No. 36 / 64 Report Format Version:6.1.2 Below 1GHz Data:
802.11a CHANNEL TX Channel 40 FREQUENCY RANGE 9kHz ~ 1GHz DETECTOR FUNCTION Quasi-Peak (QP) NO. FREQ.
(MHz) 1 2 3 4 5 6 83.74 163.91 258.05 319.50 396.18 530.91 REMARKS:
(dB) LIMIT MARGIN
(dBuV/m) ANTENNA HEIGHT ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW VALUE
(dBuV) 34.74 31.32 37.12 43.86 34.20 33.09 LEVEL
(dBuV/m) 22.61 QP 24.46 QP 30.46 QP 39.35 QP 30.88 QP 32.29 QP
(m) 2.15 H 2.61 H 1.83 H 2.01 H 1.21 H 1.09 H
-17.39
-19.04
-15.54
-6.65
-15.12
-13.71 40.00 43.50 46.00 46.00 46.00 46.00 TABLE ANGLE
(Degree) 283 250 151 273 255 222 CORRECTION FACTOR
(dB/m)
-12.13
-6.86
-6.66
-4.51
-3.32
-0.80 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit of frequency range 30MHz~1000MHz. 5. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report. Report No.: RF190225D05-1 Page No. 37 / 64 Report Format Version:6.1.2 CHANNEL TX Channel 40 FREQUENCY RANGE 9kHz ~ 1GHz DETECTOR FUNCTION Quasi-Peak (QP)
(dB) LIMIT MARGIN
(dBuV/m) ANTENNA HEIGHT ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 40.53 36.04 38.09 34.14 30.30 34.46 LEVEL
(dBuV/m) 28.61 QP 29.18 QP 32.89 QP 29.76 QP 26.98 QP 32.54 QP
(m) 1.06 V 1.34 V 1.18 V 1.54 V 1.41 V 1.15 V
-11.39
-14.32
-13.11
-16.24
-19.02
-13.46 40.00 43.50 46.00 46.00 46.00 46.00 TABLE ANGLE
(Degree) 360 67 65 111 7 274 CORRECTION FACTOR
(dB/m)
-11.92
-6.86
-5.20
-4.38
-3.32
-1.92 NO. FREQ.
(MHz) 1 2 3 4 5 6 81.65 164.01 294.96 344.09 395.16 456.02 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit of frequency range 30MHz~1000MHz. 5. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report. Report No.: RF190225D05-1 Page No. 38 / 64 Report Format Version:6.1.2 4.2 Conducted Emission Measurement 4.2.1 Limits of Conducted Emission Measurement Frequency (MHz) 0.15 - 0.5 0.50 - 5.0 5.0 - 30.0 Quasi-peak 66 - 56 56 60 Conducted Limit (dBuV) Average 56 - 46 46 50 Note: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. Description & Manufacturer Model No. Serial No. Cal. Date Cal. Due 4.2.2 Test Instruments ROHDE & SCHWARZ TEST RECEIVER ROHDE & SCHWARZ Artificial Mains Network (For EUT) LISN With Adapter (for EUT) EMCO L.I.S.N. (For peripherals) SCHWARZBECK Artificial Mains Network (For EUT) Software RF cable (JYEBAO) With10dB PAD LYNICS Terminator (For EMCO LISN) LYNICS Terminator (For EMCO LISN) ROHDE & SCHWARZ Artificial Mains Network (For TV EUT) LISN With Adapter (for TV EUT) Note:
ESCS 30 838251/021 Nov. 1, 2018 Oct. 31, 2019 ENV216 AD10 3825/2 NNLK8129 Cond_V7.3.7.4 5D-FB 0900510 0900510 ESH3-Z5 100220 101195 C03Ada-002 9504-2359 8129229 May 2, 2018 May 1, 2019 May 2, 2018 May 1, 2019 Jul. 26, 2018 Jul. 25, 2019 May 3, 2018 May 2, 2019 NA NA NA E1-01-300 E1-01-301 100220 Cable-C03.01 Sep. 18, 2018 Sep. 17, 2019 Jan. 25, 2019 Jan. 24, 2020 Jan. 25, 2019 Jan. 24, 2020 Nov. 21, 2018 Nov. 20, 2019 Nov. 21, 2018 Nov. 20, 2019 N/A 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Shielded Room No. 3. Report No.: RF190225D05-1 Page No. 39 / 64 Report Format Version:6.1.2 4.2.3 Test Procedure a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) was not recorded. NOTE: All modes of operation were investigated and the worst-case emissions are reported. 4.2.4 Deviation from Test Standard No deviation. 4.2.5 Test Setup Vertical Ground Reference Plane 40cm EUT LISN 80cm Test Receiver Horizontal Ground Reference Plane Note: 1.Support units were connected to second LISN. For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.2.6 EUT Operating Condition Same as 4.1.6. Report No.: RF190225D05-1 Page No. 40 / 64 Report Format Version:6.1.2 4.2.7 Test Results Phase Freq. No
[MHz]
0.16172 0.20469 0.42344 1.87109 3.39844 6.21875 1 2 3 4 5 6 REMARKS:
Line (L) Detector Function Quasi-Peak (QP) /
Average (AV) Corr. Factor
(dB) 9.71 9.71 9.75 9.92 9.99 10.08 Reading Value Emission Level
[dB (uV)]
[dB (uV)]
Limit
[dB (uV)]
Margin
(dB) Q.P. 43.42 38.18 27.58 18.74 18.68 13.64 AV. 28.58 23.48 13.46 6.28 5.52 2.04 Q.P. 53.13 47.89 37.33 28.66 28.67 23.72 AV. 38.29 33.19 23.21 16.20 15.51 12.12 Q.P. 65.38 63.42 57.38 56.00 56.00 60.00 AV. 55.38 53.42 47.38 46.00 46.00 50.00 Q.P.
-12.25
-15.53
-20.05
-27.34
-27.33
-36.28 AV.
-17.09
-20.23
-24.17
-29.80
-30.49
-37.88 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF190225D05-1 Page No. 41 / 64 Report Format Version:6.1.2 Phase No Freq.
[MHz]
0.15781 0.21641 0.51328 1.88672 3.22266 6.08984 1 2 3 4 5 6 REMARKS:
Neutral (N) Detector Function Quasi-Peak (QP) /
Average (AV) Corr. Factor
(dB) 9.72 9.72 9.78 9.91 9.98 10.07 Reading Value Emission Level
[dB (uV)]
[dB (uV)]
Limit
[dB (uV)]
Margin
(dB) Q.P. 43.28 36.48 29.06 16.62 17.26 15.70 AV. 28.38 20.84 20.58 9.68 9.18 9.04 Q.P. 53.00 46.20 38.84 26.53 27.24 25.77 AV. 38.10 30.56 30.36 19.59 19.16 19.11 Q.P. 65.58 62.96 56.00 56.00 56.00 60.00 AV. 55.58 52.96 46.00 46.00 46.00 50.00 Q.P.
-12.58
-16.76
-17.16
-29.47
-28.76
-34.23 AV.
-17.48
-22.40
-15.64
-26.41
-26.84
-30.89 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF190225D05-1 Page No. 42 / 64 Report Format Version:6.1.2 4.3 Transmit Power Measurement 4.3.1 Limits of Transmit Power Measurement Operation Band U-NII-1 U-NII-2A U-NII-2C U-NII-3 EUT Category Limit Outdoor Access Point Fixed point-to-point Access Point Indoor Access Point Client device
---
---
1 Watt (30 dBm)
(Max. e.i.r.p 125mW(21 dBm) at any elevation angle above 30 degrees as measured from the horizon) 1 Watt (30 dBm) 1 Watt (30 dBm) 250mW (24 dBm) 250mW (24 dBm) or 11 dBm+10 log B*
250mW (24 dBm) or 11 dBm+10 log B*
1 Watt (30 dBm)
*B is the 26 dB emission bandwidth in megahertz Per KDB 662911 Method of conducted output power measurement on IEEE 802.11 devices, Array Gain = 0 dB (i.e., no array gain) for NANT 4;
Array Gain = 0 dB (i.e., no array gain) for channel widths 40 MHz for any NANT;
Array Gain = 5 log(NANT/NSS) dB or 3 dB, whichever is less for 20-MHz channel widths with NANT 5. For power measurements on all other devices: Array Gain = 10 log(NANT/NSS) dB. Attenuator Power Sensor Power Meter EUT 4.3.2 Test Setup 4.3.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. Report No.: RF190225D05-1 Page No. 43 / 64 Report Format Version:6.1.2 4.3.4 Test Procedure For Average Power Measurement For 802.11a, 802.11n (20MHz), 802.11n (40MHz), 802.11ac (20MHz), 802.11ac (40MHz) Method PM is used to perform output power measurement, trigger and gating function of wide band power meter is enabled to measure max output power of TX on burst and set the detector to AVERAGE. Duty factor is not added to measured value. For 802.11ac (80MHz) 1) Set span to encompass the entire 26 dB EBW (or, alternatively, the entire 99% occupied bandwidth) of the signal. 2) Set sweep trigger to free run. 3) Set RBW = 1 MHz. 4) Set VBW 3 MHz 5) Number of points in sweep 2 Span / RBW. 6) Sweep time (number of points in sweep) * T 7) Using emission bandwidth to determine the frequency span for integration the channel bandwidth. 8) Detector = RMS. 9) Trace mode = max hold. 10) Allow max hold to run for at least 60 seconds, or longer as needed to allow the trace to stabilize. 4.3.5 Deviation from Test Standard No deviation. 4.3.6 EUT Operating Condition The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF190225D05-1 Page No. 44 / 64 Report Format Version:6.1.2 4.3.7 Test Result Power Output:
802.11a Channel 36 40 48 149 157 165 Channel Frequency
(MHz) 5180 5200 5240 5745 5785 5825 Maximum Conducted Power (mW) Maximum Conducted Power (dBm) Power Limit
(dBm) Pass/Fail 66.988 66.681 65.766 63.68 63.387 63.533 18.26 18.24 18.18 18.04 18.02 18.03 24 24 24 30 30 30 Pass Pass Pass Pass Pass Pass 802.11ac (20MHz) CHAN. FREQ.
(MHz) 36 40 48 149 157 165 5180 5200 5240 5745 5785 5825 802.11ac (40MHz) CHAN. FREQ.
(MHz) 38 46 151 159 5190 5230 5755 5795 802.11ac (80MHz) CHAN. 42 155 FREQ.
(MHz) 5210 5775 Report No.: RF190225D05-1 Maximum Conducted Power (dBm) Chain 0 18.11 18.15 18.12 18.13 18.14 18.19 Chain 1 18.04 18.09 18.07 18.06 18.10 18.12 Maximum Conducted Power (dBm) Chain 0 17.16 18.02 18.09 18.06 Chain 1 17.09 18.00 18.06 18.02 Maximum Conducted Power (dBm) Chain 0 15.23 18.14 Chain 1 15.18 18.11 Total Power
(mW) 128.394 129.730 128.984 128.986 129.728 130.780 Total Power
(mW) 103.168 126.483 128.390 127.360 Total Power
(mW) 66.304 129.877 Total Power
(dBm) 21.09 21.13 21.11 21.11 21.13 21.17 Total Power
(dBm) 20.14 21.02 21.09 21.05 Total Power
(dBm) 18.22 21.14 Power Limit
(dBm) Pass/Fail 24 24 24 30 30 30 Power Limit
(dBm) 24 24 30 30 Power Limit
(dBm) 24 30 Pass Pass Pass Pass Pass Pass Pass/Fail Pass Pass Pass Pass Pass/Fail Pass Pass Page No. 45 / 64 Report Format Version:6.1.2 4.4 Occupied Bandwidth Measurement EUT 4.4.1 Test Setup 4.4.2 Test Instruments SPECTRUM ANALYZER Attenuator Refer to section 4.1.2 to get information of above instrument. 4.4.3 Test Procedure The transmitter output was connected to the spectrum analyzer through an attenuator. The bandwidth of the fundamental frequency was measured by spectrum analyzer with resolution bandwidth in the range of 1% to 5% of the anticipated emission bandwidth, and a video bandwidth at least 3x the resolution bandwidth and set the detector to SAMPLE. The width of a frequency band such that, below the lower and above the upper frequency limits, the mean powers emitted are each equal to a specified percentage 0.5
%of the total mean power of a given emission. Report No.: RF190225D05-1 Page No. 46 / 64 Report Format Version:6.1.2 4.4.4 Test Results 802.11a Channel Channel Frequency (MHz) Occupied Bandwidth (MHz) 36 40 48 149 157 165 5180 5200 5240 5745 5785 5825 802.11ac (20MHz) Channel Channel Frequency
(MHz) 36 40 48 149 157 165 5180 5200 5240 5745 5785 5825 802.11ac (40MHz) Channel Channel Frequency
(MHz) 38 46 151 159 5190 5230 5755 5795 802.11ac (80MHz) Channel 42 155 Channel Frequency
(MHz) 5210 5775 17.04 17.04 16.92 18.52 17.90 17.60 Occupied Bandwidth (MHz) CHAIN 0 18.00 17.88 18.00 19.13 18.70 18.30 CHAIN 1 18.00 18.00 18.00 18.80 18.60 18.20 Occupied Bandwidth (MHz) CHAIN 0 36.60 37.00 37.11 36.83 CHAIN 1 36.60 37.00 37.00 36.66 Occupied Bandwidth (MHz) CHAIN 0 75.12 75.48 CHAIN 1 75.12 75.60 Report No.: RF190225D05-1 Page No. 47 / 64 Report Format Version:6.1.2 802.11a / CH149 802.11ac (20MHz)_Chain0 / CH149 Spectrum Plot of Worst Value 802.11ac (40MHz)_Chain0 / CH151 802.11ac (80MHz)_Chain1 / CH155 Report No.: RF190225D05-1 Page No. 48 / 64 Report Format Version:6.1.2 For U-NII-1 Band:
Spectrum Plot for near by DFS band 802.11a / CH48 802.11ac (20MHz) / CH48 802.11ac (40MHz) / CH46 802.11ac (80MHz) / CH42 For U-NII-3 Band:
Spectrum Plot for near by DFS band 802.11a / CH149 802.11ac (20MHz) / CH149 802.11ac (40MHz) / CH151 802.11ac (80MHz) / CH155 Report No.: RF190225D05-1 Page No. 49 / 64 Report Format Version:6.1.2 4.5 Peak Power Spectral Density Measurement 4.5.1 Limits of Peak Power Spectral Density Measurement Operation Band U-NII-1 U-NII-2A U-NII-2C U-NII-3 EUT Category Outdoor Access Point Limit Fixed point-to-point Access Point 17dBm/ MHz Indoor Access Point Client device
---
---
11dBm/ MHz 11dBm/ MHz 11dBm/ MHz 30dBm/ 500kHz EUT Attenuator SPECTRUM ANALYZER 4.5.2 Test Setup 4.5.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.5.4 Test Procedure For U-NII-1 band:
Using method SA-2 1) Set span to encompass the entire emission bandwidth (EBW) of the signal. 2) Set RBW = 1 MHz, Set VBW 3 MHz, Detector = RMS 3) Sweep time = auto, trigger set to free run. 4) Trace average at least 100 traces in power averaging mode. 5) Record the max value and add 10 log (1/duty cycle) For U-NII-3:
1) Set span to encompass the entire emission bandwidth (EBW) of the signal. 2) Set RBW = 500 kHz, Set VBW 3 RBW, Detector = RMS 3) Sweep time = auto, trigger set to free run. 4) Trace average at least 100 traces in power averaging mode. 5) Record the max value and add 10 log (1/duty cycle) 4.5.5 Deviation from Test Standard No deviation. 4.5.6 EUT Operating Condition Same as Item 4.3.6. Report No.: RF190225D05-1 Page No. 50 / 64 Report Format Version:6.1.2 4.5.7 Test Results 802.11a Chan. Chan. Freq.
(MHz) Duty Factor
(dB) PSD With Duty Factor
(dBm/MHz) MAX. Limit
(dBm/MHz) Pass / Fail PSD W/O Duty Factor
(dBm/MHz) 36 40 48 5180 5200 5240 4.65 4.17 4.93 0.27 0.27 0.27 Note: Refer to section 3.3 for duty cycle spectrum plot. 802.11ac (20MHz) Chan. Freq.
(MHz) 5180 5200 5240 PSD W/O Duty Factor (dBm) Chain 1 Chain 0 4.11 4.46 4.23 4.29 4.58 4.60 36 40 48 Chan. 4.92 4.44 5.20 11 11 11 Pass Pass Pass Duty Factor
(dB) Total PSD With Duty Factor (dBm) MAX. Limit
(dBm) Pass /
Fail 0.11 0.11 0.11 7.41 7.38 7.71 11 11 11 Pass Pass Pass Note: 1. Method a) of power density measurement of KDB 662911 is using for calculating total power density. Total power density is summing entire spectra across corresponding frequency bins on the various outputs by computer. 2. Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 5.82dBi < 6dBi , so the power density limit is not reduced. 3. Refer to section 3.3 for duty cycle spectrum plot. Chan. 802.11ac (40MHz) Chan. Freq.
(MHz) 5190 5230 38 46 PSD W/O Duty Factor (dBm) Chain 0 Chain 1 0.59 0.22 2.11 2.13 Duty Factor
(dB) Total PSD With Duty Factor (dBm) MAX. Limit
(dBm) Pass /
Fail 0.53 0.53 3.95 5.66 11 11 Pass Pass Note: 1. Method a) of power density measurement of KDB 662911 is using for calculating total power density. Total power density is summing entire spectra across corresponding frequency bins on the various outputs by computer. 2. Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 5.82dBi < 6dBi , so the power density limit is not reduced. 3. Refer to section 3.3 for duty cycle spectrum plot. 802.11ac (80MHz) Chan. Freq.
(MHz) 5210 Chan. 42 PSD W/O Duty Factor (dBm) Chain 1 Chain 0
-4.25
-4.14 Duty Factor
(dB) Total PSD With Duty Factor (dBm) MAX. Limit
(dBm) 0.74
-0.44 11 Pass /
Fail Pass Note: 1. Method a) of power density measurement of KDB 662911 is using for calculating total power density. Total power density is summing entire spectra across corresponding frequency bins on the various outputs by computer. 2. Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 5.82dBi < 6dBi , so the power density limit is not reduced. 3. Refer to section 3.3 for duty cycle spectrum plot. Report No.: RF190225D05-1 Page No. 51 / 64 Report Format Version:6.1.2 802.11a / CH48 Spectrum Plot of Worst Value 802.11ac (20MHz)_Chain 1 / CH48 802.11ac (40MHz)_Chain 1 / CH46 802.11ac (80MHz)_Chain 1 / CH42 Report No.: RF190225D05-1 Page No. 52 / 64 Report Format Version:6.1.2 For U-NII-3:
802.11a Chan. Chan. Freq.
(MHz) Duty Factor
(dB) PSD W/O Duty Factor
(dBm/500kHz)
-3.76
-3.77
-3.56 149 157 165 0.27 0.27 0.27 Note: Refer to section 3.3 for duty cycle spectrum plot. 5745 5785 5825 Total PSD With Duty Factor
(dBm/500kHz)
-3.49
-3.50
-3.29 Limit
(dBm/500kHz) 30 30 30 Pass
/Fail Pass Pass Pass 802.11ac (20MHz) TX chain Chan. Chan. Freq.
(MHz) PSD W/O Duty Factor
(dBm/500kHz) 10 log (N=2) dB Duty Factor
(dB) Total PSD With Duty Factor
(dBm/500kHz) Limit
(dBm/500kHz) Pass
/Fail 0 1 149 157 165 149 157 165 5745 5785 5825 5745 5785 5825
-4.13
-3.94
-4.08
-4.23
-3.89
-4.02 3.01 3.01 3.01 3.01 3.01 3.01 0.11 0.11 0.11 0.11 0.11 0.11
-1.01
-0.82
-0.96
-1.11
-0.77
-0.90 28.91 28.91 28.91 28.91 28.91 28.91 Pass Pass Pass Pass Pass Pass Note: 1. Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 7.09dBi > 6dBi , so the power density limit shall be reduced to 30-(7.09-6) = 28.91dBm. 2. Refer to section 3.3 for duty cycle spectrum plot. 802.11ac (40MHz) TX chain Chan. Chan. Freq.
(MHz) PSD W/O Duty Factor
(dBm/500kHz) 10 log (N=2) dB Duty Factor
(dB) Total PSD With Duty Factor
(dBm/500kHz) Limit
(dBm/500kHz) 0 1 151 159 151 159 5755 5795 5755 5795
-9.55
-9.82
-9.71
-9.84 3.01 3.01 3.01 3.01 0.53 0.53 0.53 0.53
-6.01
-6.28
-6.17
-6.30 28.91 28.91 28.91 28.91 Pass
/Fail Pass Pass Pass Pass Note: 1. Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 7.09dBi > 6dBi , so the power density limit shall be reduced to 30-(7.09-6) = 28.91dBm. 2. Refer to section 3.3 for duty cycle spectrum plot. 802.11ac (80MHz) TX chain Chan. Chan. Freq.
(MHz) PSD W/O Duty Factor
(dBm/500kHz) 10 log (N=2) dB Duty Factor
(dB) Total PSD With Duty Factor
(dBm/500kHz) Limit
(dBm/500kHz) 0 1 155 155 5775 5775
-12.37
-12.49 3.01 3.01 0.74 0.74
-8.62
-8.74 28.91 28.91 Pass
/Fail Pass Pass Note: 1. Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 7.09dBi > 6dBi , so the power density limit shall be reduced to 30-(7.09-6) = 28.91dBm. 2. Refer to section 3.3 for duty cycle spectrum plot. Report No.: RF190225D05-1 Page No. 53 / 64 Report Format Version:6.1.2 802.11a / CH165 Spectrum Plot of Worst Value 802.11ac (20MHz)_Chain 1 / CH157 802.11ac (40MHz)_Chain 0 / CH151 802.11ac (80MHz)_Chain 0 / CH155 Report No.: RF190225D05-1 Page No. 54 / 64 Report Format Version:6.1.2 4.6 Frequency Stability Measurement 4.6.1 Limits of Frequency Stability Measurement The frequency of the carrier signal shall be maintained within band of operation Spectrum Analyzer 4.6.2 Test Setup 4.6.3 Test Instruments Temperature Chamber AC Power Supply Refer to section 4.1.2 to get information of above instrument. 4.6.4 Test Procedure a. The EUT was placed inside the environmental test chamber and powered by nominal AC voltage. b. Turn the EUT on and couple its output to a spectrum analyzer. c. Turn the EUT off and set the chamber to the highest temperature specified. d. Allow sufficient time (approximately 30 min) for the temperature of the chamber to stabilize, turn the EUT on and measure the operating frequency after 2, 5, and 10 Minutes. e. Repeat step (d) with the temperature chamber set to the next desired temperature until measurements down to the lowest specified temperature have been completed. f. The test chamber was allowed to stabilize at +20 degree C for a minimum of 30 Minutes. The supply voltage was then adjusted on the EUT from 85% to 115% and the frequency record. 4.6.5 Deviation from Test Standard No deviation. 4.6.6 EUT Operating Condition Set the EUT transmit at un-modulation mode to test frequency stability. Report No.: RF190225D05-1 Page No. 55 / 64 Report Format Version:6.1.2 4.6.7 Test Results Frequency Stability Versus Temp. Operating Frequency: 5180 MHz TEMP.
() Power Supply
(Vac) 120 120 120 120 120 120 120 120 120 50 40 30 20 10 0
-10
-20
-30 0 Minute 2 Minute 5 Minute 10 Minute Measured Frequency
(MHz) 5179.9798 5179.9986 5180.0065 5180.0266 5179.9985 5180.0205 5180.0066 5180.0019 5179.9968 Pass/Fail Pass Pass Pass Pass Pass Pass Pass Pass Pass Measured Frequency
(MHz) 5179.9827 5180.0008 5180.0073 5180.0262 5179.9968 5180.0166 5180.0086 5180.0011 5179.9989 Pass/Fail Pass Pass Pass Pass Pass Pass Pass Pass Pass Measured Frequency
(MHz) 5179.9823 5180.001 5180.0048 5180.0243 5179.9959 5180.0204 5180.0076 5180.0043 5179.9987 Pass/Fail Pass Pass Pass Pass Pass Pass Pass Pass Pass Measured Frequency
(MHz) 5179.9831 5180.0002 5180.0079 5180.0261 5179.9996 5180.0172 5180.0067 5180.0049 5179.9996 Pass/Fail Pass Pass Pass Pass Pass Pass Pass Pass Pass Frequency Stability Versus Voltage Operating Frequency: 5180 MHz TEMP.
() Power Supply
(Vac) 138 120 102 20 0 Minute 2 Minute 5 Minute 10 Minute Measured Frequency
(MHz) 5180.0259 5180.0266 5180.0257 Pass/Fail Pass Pass Pass Measured Frequency
(MHz) 5180.0266 5180.0262 5180.0265 Pass/Fail Pass Pass Pass Measured Frequency
(MHz) 5180.0238 5180.0243 5180.0237 Pass/Fail Pass Pass Pass Measured Frequency
(MHz) 5180.0255 5180.0261 5180.0255 Pass/Fail Pass Pass Pass Report No.: RF190225D05-1 Page No. 56 / 64 Report Format Version:6.1.2 4.7 4.7.1 Limits of 6dB Bandwidth Measurement 6dB Bandwidth Measurement The minimum of 6dB Bandwidth Measurement is 0.5MHz. EUT Attenuator 4.7.2 Test Setup 4.7.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.7.4 Test Procedure MEASUREMENT PROCEDURE REF Spectrum Analyzer a. Set resolution bandwidth (RBW) = 100kHz b. Set the video bandwidth (VBW) 3 x RBW, Detector = Peak. c. Trace mode = max hold. d. Sweep = auto couple. e. Measure the maximum width of the emission that is constrained by the frequencies associated with the two amplitude points (upper and lower) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission 4.7.5 Deviation from Test Standard No deviation. 4.7.6 EUT Operating Condition The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF190225D05-1 Page No. 57 / 64 Report Format Version:6.1.2 4.7.7 Test Results 802.11a Channel Frequency (MHz) 6dB Bandwidth
(MHz) Minimum Limit
(MHz) Pass / Fail 149 157 165 5745 5785 5825 16.37 16.39 16.39 0.5 0.5 0.5 802.11ac (20MHz) Channel Frequency (MHz) 6dB Bandwidth (MHz) Minimum Limit Chain 0 Chain 1
(MHz) 149 157 165 5745 5785 5825 17.59 17.58 17.62 17.60 17.58 17.60 0.5 0.5 0.5 802.11ac (40MHz) Channel Frequency (MHz) 6dB Bandwidth (MHz) Minimum Limit Chain 0 Chain 1
(MHz) 151 159 5755 5795 36.37 36.35 36.14 36.15 0.5 0.5 802.11ac (80MHz) Channel Frequency (MHz) 6dB Bandwidth (MHz) Minimum Limit Chain 0 Chain 1
(MHz) PASS PASS PASS Pass / Fail PASS PASS PASS Pass / Fail PASS PASS Pass / Fail 155 5775 75.35 75.40 0.5 PASS Report No.: RF190225D05-1 Page No. 58 / 64 Report Format Version:6.1.2 802.11a / CH149 Spectrum Plot of Worst Value 802.11ac (20MHz)_Chain 0 / CH165 802.11ac (40MHz)_Chain 0 / CH159 802.11ac (80MHz)_Chain 0 / CH155 Report No.: RF190225D05-1 Page No. 59 / 64 Report Format Version:6.1.2 5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF190225D05-1 Page No. 60 / 64 Report Format Version:6.1.2 Annex A- Radiated Out of Band Emission (OOBE) Measurement (For U-NII-3 band) 802.11a CH149 Horizontal Vertical CH157 Horizontal Vertical CH165 Horizontal Vertical Report No.: RF190225D05-1 Page No. 61 / 64 Report Format Version:6.1.2 802.11ac (20MHz) CH149 Horizontal Vertical CH157 Horizontal Vertical CH165 Horizontal Vertical Report No.: RF190225D05-1 Page No. 62 / 64 Report Format Version:6.1.2 802.11ac (40MHz) CH151 Horizontal Vertical CH159 Horizontal Vertical 802.11ac (80MHz) CH155 Horizontal Vertical Report No.: RF190225D05-1 Page No. 63 / 64 Report Format Version:6.1.2 Appendix Information of the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following:
Lin Kou EMC/RF Lab Tel: 886-2-26052180 Fax: 886-2-26051924 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com Hsin Chu EMC/RF/Telecom Lab Tel: 886-3-6668565 Fax: 886-3-6668323 The address and road map of all our labs can be found in our web site also.
--- END ---
Report No.: RF190225D05-1 Page No. 64 / 64 Report Format Version:6.1.2
1 2 | Test setup photos | Test Setup Photos | 322.45 KiB | March 04 2019 |
PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Page No. 1 / 3 Reference No.: RF190225D05 RADIATED EMISSION TEST
<Frequency Range below 1GH>
Reference No.: RF190225D05 Page No. 2 / 3 RADIATED EMISSION TEST
<Frequency Range above 1GHz>
Reference No.: RF190225D05 Page No. 3 / 3
1 2 | Test Report(DTS-WLAN) rev | Test Report | 1.37 MiB | March 04 2019 |
FCC Test Report Report No.: RF190225D05 FCC ID: P27RC8335PRO Test Model: RC8335PRO Received Date: Feb. 25, 2019 Test Date: Mar. 6 to 18, 2019 Issued Date: Mar. 22, 2019 Applicant: Sercomm Corp. Address: 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. (NanKang Software Park) Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan FCC Registration /
Designation Number: 198487 / TW2021
(R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF190225D05 Page No. 1 / 53 Report Format Version: 6.1.1 Table of Contents 4 3 Release Control Record .................................................................................................................................. 4 Certificate of Conformity ...................................................................................................................... 5 1 Summary of Test Results ..................................................................................................................... 6 2 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.3 Duty Cycle of Test Signal ................................................................................................................... 11 3.4 Description of Support Units ............................................................................................................. 12 3.4.1 Configuration of System under Test .................................................................................................. 12 3.5 General Description of Applied Standards ........................................................................................ 12 Test Types and Results ...................................................................................................................... 13 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 13 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 13 4.1.2 Test Instruments ................................................................................................................................ 14 4.1.3 Test Procedures ................................................................................................................................. 15 4.1.4 Deviation from Test Standard ............................................................................................................ 15 4.1.5 Test Setup .......................................................................................................................................... 16 4.1.6 EUT Operating Conditions ................................................................................................................. 17 4.1.7 Test Results ....................................................................................................................................... 18 4.2 Conducted Emission Measurement .................................................................................................. 32 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 32 4.2.2 Test Instruments ................................................................................................................................ 32 4.2.3 Test Procedures ................................................................................................................................. 33 4.2.4 Deviation from Test Standard ............................................................................................................ 33 4.2.5 Test Setup .......................................................................................................................................... 33 4.2.6 EUT Operating Conditions ................................................................................................................. 33 4.2.7 Test Results ....................................................................................................................................... 34 4.3 6dB Bandwidth Measurement ........................................................................................................... 36 4.3.1 Limits of 6dB Bandwidth Measurement ............................................................................................. 36 4.3.2 Test Setup .......................................................................................................................................... 36 4.3.3 Test Instruments ................................................................................................................................ 36 4.3.4 Test Procedure .................................................................................................................................. 36 4.3.5 Deviation fromTest Standard ............................................................................................................. 36 4.3.6 EUT Operating Conditions ................................................................................................................. 36 4.3.7 Test Result ......................................................................................................................................... 37 4.4 Conducted Output Power Measurement ........................................................................................... 39 4.4.1 Limits of Conducted Output Power Measurement ............................................................................ 39 4.4.2 Test Setup .......................................................................................................................................... 39 4.4.3 Test Instruments ................................................................................................................................ 39 4.4.4 Test Procedures ................................................................................................................................. 39 4.4.5 Deviation from Test Standard ............................................................................................................ 39 4.4.6 EUT Operating Conditions ................................................................................................................. 39 4.4.7 Test Results ....................................................................................................................................... 40 4.5 Power Spectral Density Measurement .............................................................................................. 42 4.5.1 Limits of Power Spectral Density Measurement ............................................................................... 42 4.5.2 Test Setup .......................................................................................................................................... 42 4.5.3 Test Instruments ................................................................................................................................ 42 4.5.4 Test Procedure .................................................................................................................................. 42 4.5.5 Deviation from Test Standard ............................................................................................................ 42 Report No.: RF190225D05 Page No. 2 / 53 Report Format Version: 6.1.1 4.5.6 EUT Operating Condition .................................................................................................................. 42 4.5.7 Test Results ....................................................................................................................................... 43 4.6 Conducted Out of Band Emission Measurement .............................................................................. 45 4.6.1 Limits of Conducted Out of Band Emission Measurement ............................................................... 45 4.6.2 Test Setup .......................................................................................................................................... 45 4.6.3 Test Instruments ................................................................................................................................ 45 4.6.4 Test Procedure .................................................................................................................................. 45 4.6.5 Deviation from Test Standard ............................................................................................................ 45 4.6.6 EUT Operating Condition .................................................................................................................. 45 4.6.7 Test Results ....................................................................................................................................... 45 5 Pictures of Test Arrangements .......................................................................................................... 52 Appendix Information of the Testing Laboratories ................................................................................. 53 Report No.: RF190225D05 Page No. 3 / 53 Report Format Version: 6.1.1 Release Control Record Issue No. RF190225D05 Description Original release. Date Issued Mar. 22, 2019 Report No.: RF190225D05 Page No. 4 / 53 Report Format Version: 6.1.1 1 Certificate of Conformity Product: SmartThings Smart Camera, SmartThings Cam Brand: SmartThings, Sercomm Test Model: RC8335PRO Sample Status: Engineering sample Applicant: Sercomm Corp. Test Date: Mar. 6 to 18, 2019 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) ANSI C63.10: 2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the samples RF characteristics under the conditions specified in this report. Prepared by :
:
Approved by Annie Chang / Senior Specialist
, Date:
Mar. 22, 2019 Rex Lai / Associate Technical Manager
, Date:
Mar. 22, 2019 Report No.: RF190225D05 Page No. 5 / 53 Report Format Version: 6.1.1 2 Summary of Test Results 47 CFR FCC Part 15, Subpart C (Section 15.247) Test Item Result Remarks AC Power Conducted Emission PASS FCC Clause 15.207 15.205 /
15.209 /
15.247(d) 15.247(d) 15.247(a)(2) 15.247(b) 15.247(e) Radiated Emissions and Band Edge Measurement Antenna Port Emission 6dB bandwidth Conducted power Power Spectral Density Meet the requirement of limit. Minimum passing margin is -10.66dB at 0.16172MHz. Meet the requirement of limit. Minimum passing margin is -1.02dB at 2483.50MHz. Meet the requirement of limit. Meet the requirement of limit. Meet the requirement of limit. Meet the requirement of limit. Antenna connector is I-PEX not a standard connector. PASS PASS PASS PASS PASS PASS 15.203 Antenna Requirement Note:
Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2:
Frequency 150kHz ~ 30MHz 9kHz ~ 30MHz 30MHz ~ 1000MHz Above 1GHz Expanded Uncertainty
(k=2) () 2.77 dB 2.38 dB 5.54 dB 5.48 dB Measurement Conducted Emissions at mains ports Radiated Emissions up to 1 GHz Radiated Emissions above 1 GHz 2.2 Modification Record There were no modifications required for compliance. Report No.: RF190225D05 Page No. 6 / 53 Report Format Version: 6.1.1 3 General Information 3.1 General Description of EUT Product Brand Test Model Status of EUT Power Supply Rating Modulation Type Modulation Technology Transfer Rate Operating Frequency Number of Channel Output Power Antenna Type SmartThings Smart Camera, SmartThings Cam SmartThings, Sercomm RC8335PRO Engineering sample DC 12V from Adapter CCK, DQPSK, DBPSK for DSSS 64QAM, 16QAM, QPSK, BPSK for OFDM DSSS,OFDM 802.11b: up to 11Mbps 802.11g: up to 54Mbps 802.11n: up to 300Mbps 2.412 ~ 2.462GHz 11 for 802.11b, 802.11g, 802.11n (20MHz) 7 for 802.11n (40MHz) 732.906mW Ant.1: PCB dipole antenna with 2.60dBi gain Ant.2: PCB dipole antenna with 2.64dBi gain I-PEX Adapter N/A Antenna Connector Accessory Device Data Cable Supplied Note:
1. The EUT provides 2 completed transmitters and 2 receivers. Modulation Mode TX Function 802.11b 802.11g 802.11n (20MHz) 802.11n (40MHz) 1TX 1TX 2TX 2TX 2. The EUT uses following adapter. Brand Model Input Power Output Power Power Line APD WB-12G12FU 100-240V, 50-60Hz, 0.3A 12V, 1A AC 2 Pin, Non-shielded DC cable (3.0m) 3. 2.4GHz & 5GHz technologies cannot transmit at same time. 4. The above EUT information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. Report No.: RF190225D05 Page No. 7 / 53 Report Format Version: 6.1.1 3.2 Description of Test Modes 11 channels are provided for 802.11b, 802.11g and 802.11n (20MHz):
Channel 1 2 3 4 5 6 Frequency 2412MHz 2417MHz 2422MHz 2427MHz 2432MHz 2437MHz Channel 7 channels are provided for 802.11n (40MHz):
Frequency 2422MHz 2427MHz 2432MHz 2437MHz 3 4 5 6 Channel 7 8 9 10 11 Channel 7 8 9 Frequency 2442MHz 2447MHz 2452MHz 2457MHz 2462MHz Frequency 2442MHz 2447MHz 2452MHz Report No.: RF190225D05 Page No. 8 / 53 Report Format Version: 6.1.1 3.2.1 Test Mode Applicability and Tested Channel Detail EUT CONFIGURE MODE
-
Where RE1G RE<1G APPLICABLE TO PLC APCM
-
DESCRIPTION RE1G: Radiated Emission above 1GHz &
Bandedge Measurement PLC: Power Line Conducted Emission NOTE: The EUT had been pre-tested on the positioned of each 2 axis. The worst case was found when positioned on X-plane. RE<1G: Radiated Emission below 1GHz APCM: Antenna Port Conducted Measurement Radiated Emission Test (Above 1GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. Modulation EUT Configure Technology Modulation Mode Mode Data Rate
(Mbps) 802.11b 802.11g 802.11n (20MHz) Available Channel 1 to 11 1 to 11 1 to 11 Tested Channel 1, 6, 11 1, 6, 11 1, 6, 11 802.11n (40MHz) 3 to 9 3, 6, 9
-
-
-
-
DSSS OFDM OFDM OFDM Type DBPSK BPSK BPSK BPSK 1 6 6.5 13.5 Radiated Emission Test (Below 1GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. Modulation EUT Configure Technology Tested Channel Modulation Mode Mode
-
802.11b 6 DSSS Type DBPSK Data Rate
(Mbps) 1 Available Channel 1 to 11 Power Line Conducted Emission Test:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. Modulation EUT Configure Technology Tested Channel Modulation Mode Mode 6 DSSS Type DBPSK Data Rate
(Mbps) 1 Available Channel 1 to 11
-
802.11b Report No.: RF190225D05 Page No. 9 / 53 Report Format Version: 6.1.1 Antenna Port Conducted Measurement:
This item includes all test value of each mode, but only includes spectrum plot of worst value of each mode. Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. Modulation EUT Configure Technology Data Rate
(Mbps) Modulation Mode Mode 802.11b 802.11g 802.11n (20MHz) Available Channel 1 to 11 1 to 11 1 to 11 Tested Channel 1, 6, 11 1, 6, 11 1, 6, 11 802.11n (40MHz) 3 to 9 3, 6, 9
-
-
-
-
DSSS OFDM OFDM OFDM Input Power 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz Type DBPSK BPSK BPSK BPSK 1 6 6.5 13.5 Tested By Ian Chang Ian Chang Dalen Dai Saxon Lee Test Condition:
Applicable To Environmental Conditions RE1G RE<1G PLC APCM 24deg. C, 71%RH 24deg. C, 71%RH 25deg. C, 75%RH 25deg. C, 76%RH Report No.: RF190225D05 Page No. 10 / 53 Report Format Version: 6.1.1 3.3 Duty Cycle of Test Signal If duty cycle of test signal is 98 %, duty factor is not required. If duty cycle of test signal is < 98%, duty factor shall be considered. 802.11b: Duty cycle = 12.55/12.60 = 0.996 802.11g: Duty cycle = 2.087/2.222 = 0.939, Duty factor = 10 * log( 1/0.939) = 0.27 802.11n (20MHz): Duty cycle = 1.936/2.034 = 0.952, Duty factor = 10 * log( 1/0.952) = 0.21 802.11n (40MHz): Duty cycle = 0.957/1.029 = 0.930, Duty factor = 10 * log( 1/0.930) = 0.32 802.11b 802.11g 802.11n (20MHz) 802.11n (40MHz) Report No.: RF190225D05 Page No. 11 / 53 Report Format Version: 6.1.1 3.4 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Descriptions Qty. Length (m) 1. DC cable 3 Note: The core(s) is(are) originally attached to the cable(s). 1 Shielding
(Yes/No) N Cores (Qty.) Remarks 0 Supplied by client 3.4.1 Configuration of System under Test 3.5 General Description of Applied Standards Adapter (EUT) 120Vac DC in 1 EUT The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards:
FCC Part 15, Subpart C (15.247) KDB 558074 D01 15.247 Meas Guidance v05r01 KDB 662911 D01 Multiple Transmitter Output v02r01 ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. Report No.: RF190225D05 Page No. 12 / 53 Report Format Version: 6.1.1 Test Types and Results 4 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20dB below the highest level of the desired power:
Frequencies
(MHz) 0.009 ~ 0.490 0.490 ~ 1.705 1.705 ~ 30.0 30 ~ 88 88 ~ 216 216 ~ 960 Above 960 Field Strength
(microvolts/meter) Measurement Distance
(meters) 2400/F(kHz) 24000/F(kHz) 30 100 150 200 500 300 30 30 3 3 3 3 NOTE:
1. 2. 3. The lower limit shall apply at the transition frequencies. Emission level (dBuV/m) = 20 log Emission level (uV/m). For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF190225D05 Page No. 13 / 53 Report Format Version: 6.1.1 4.1.2 Test Instruments DESCRIPTION &
MANUFACTURER HP Preamplifier HP Preamplifier MITEQ Preamplifier Agilent TEST RECEIVER Schwarzbeck Antenna Schwarzbeck Antenna Schwarzbeck Horn Antenna Schwarzbeck Horn Antenna ADT. Turn Table ADT. Tower Software SUHNER RF cable With 4dB PAD SUHNER RF cable With 3/4dB PAD KEYSIGHT MIMO Powermeasurement Test set KEYSIGHT Spectrum Analyzer Loop Antenna EMCI EMCO Horn Antenna Highpass filter Wainwright Instruments ROHDE & SCHWARZ Spectrum Analyzer Anritsu Power Sensor Anritsu Power Meter AMF-6F-260400-33-8P MODEL NO. 8447D 8449B N9038A VULB 9168 VHBA 9123 BBHA-9170 BBHA 9120-D1 TT100 AT100 Radiated_V7.6.15.9.5 SERIAL NO. 2432A03504 3008A01201 892164 MY51210129 139 480 212 D130 0306 0306 NA CALIBRATED CALIBRATED DATE UNTIL Feb. 19, 2020 Feb. 20, 2019 Feb. 20, 2020 Feb. 21, 2019 Feb. 20, 2019 Feb. 19, 2020 Mar. 05, 2019 Mar. 04, 2020 Nov. 26, 2018 Nov. 25, 2019 May 19, 2017 May 18, 2019 Nov. 25, 2018 Nov. 24, 2019 Nov. 25, 2018 Nov. 24, 2019 NA NA NA NA NA NA SF102 SF102 Cable-CH6-01 Aug. 13, 2018 Aug. 12, 2019 Cable-CH8-3.6m Aug. 13, 2018 Aug. 12, 2019 U2021XA U2021XA-001 Jun. 4, 2018 Jun. 3, 2019 N9030A LPA600 3115 WHK 3.1/18G-10SS MY54490260 270 00028257 SN 8 Aug. 3, 2018 Aug. 2, 2019 Aug. 11, 2017 Aug. 10, 2019 Nov. 25, 2018 Nov. 24, 2019 NA NA FSV40 MA2411B ML2495A 101042 Sep. 27, 2018 Sep. 26, 2019 0738404 Apr. 26, 2018 Apr. 25, 2019 0842014 Apr. 26, 2018 Apr. 25, 2019 NOTE: 1. The calibration interval of the above test instruments is 12/24 months. And the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna and HP preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3. The test was performed in Chamber No. 6. 4. The Industry Canada Reference No. IC 7450E-6. Report No.: RF190225D05 Page No. 14 / 53 Report Format Version: 6.1.1 4.1.3 Test Procedures For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Parallel, perpendicular, and ground-parallel orientations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. NOTE:
1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum f. hold mode when the test frequency is below 1 GHz. The test-receiver system was set to peak and average detects function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note:
1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-
peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 1/T
(Duty cycle < 98%) or 10Hz (Duty cycle 98%) for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF190225D05 Page No. 15 / 53 Report Format Version: 6.1.1 4.1.5 Test Setup For Radiated emission below 30MHz 1 m EUT&
Support Units 80cm 3m Turn Table Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz EUT&
Support Units 80cm 3m 10m Turn Table Ant. Tower 1-4m Variable Ground Plane Test Receiver Report No.: RF190225D05 Page No. 16 / 53 Report Format Version: 6.1.1 For Radiated emission above 1GHz EUT&
Support Units 3m Ant. Tower 1-4m Variable Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions Set the EUT under transmission condition continuously at specific channel frequency. Report No.: RF190225D05 Page No. 17 / 53 Report Format Version: 6.1.1 4.1.7 Test Results Above 1GHz Data 802.11b CHANNEL TX Channel 1 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV) NO. 1 2 3 4 5 6 FREQ.
(MHz) 2390.00 2390.00
*2412.00
*2412.00 4824.00 4824.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2412.00
*2412.00 4824.00 4824.00 REMARKS:
(dB) LIMIT MARGIN
(dBuV/m) 74.00 54.00 74.00 54.00
-11.65
-1.08 ANTENNA HEIGHT TABLE ANGLE
(Degree)
(m) 2.86 H 2.86 H 2.86 H 2.86 H 3.36 H 3.36 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 62.35 PK 62.57 52.92 AV 53.14 112.18 PK 112.39 108.49 AV 108.70 54.50 PK 48.12 50.65 AV 44.27 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 61.38 52.76 105.71 102.77 47.32 43.04 LEVEL
(dBuV/m) 61.16 PK 52.54 AV 105.50 PK 102.56 AV 53.70 PK 49.42 AV
(m) 1.00 V 1.00 V 1.00 V 1.00 V 1.96 V 1.96 V TABLE ANGLE
(Degree) 35 35 35 35 101 101 83 83 83 83 212 212 ANTENNA HEIGHT
-12.84
-1.46
-19.50
-3.35
-20.30
-4.58 74.00 54.00 74.00 54.00
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m)
-0.22
-0.22
-0.21
-0.21 6.38 6.38 CORRECTION FACTOR
(dB/m)
-0.22
-0.22
-0.21
-0.21 6.38 6.38 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. Report No.: RF190225D05 Page No. 18 / 53 Report Format Version: 6.1.1 CHANNEL TX Channel 6 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN
(dBuV/m) 74.00 54.00 ANTENNA HEIGHT TABLE ANGLE
(Degree)
(m) 2.77 H 2.77 H 2.81 H 2.81 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 113.38 PK 113.58 109.22 AV 109.42 55.54 PK 49.36 52.92 AV 46.74 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 106.87 103.72 47.95 44.18 LEVEL
(dBuV/m) 106.67 PK 103.52 AV 54.13 PK 50.36 AV
(m) 1.03 V 1.03 V 1.88 V 1.88 V TABLE ANGLE
(Degree) ANTENNA HEIGHT 92 92 241 241 42 42 116 116
-19.87
-3.64
-18.46
-1.08 74.00 54.00
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m)
-0.20
-0.20 6.18 6.18 CORRECTION FACTOR
(dB/m)
-0.20
-0.20 6.18 6.18 NO. 1 2 3 4 FREQ.
(MHz)
*2437.00
*2437.00 4874.00 4874.00 NO. FREQ.
(MHz) 1 2 3 4
*2437.00
*2437.00 4874.00 4874.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. Report No.: RF190225D05 Page No. 19 / 53 Report Format Version: 6.1.1 CHANNEL TX Channel 11 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN
(dBuV/m) ANTENNA HEIGHT 74.00 54.00 74.00 54.00
-11.66
-4.09
-19.22
-1.58 TABLE ANGLE
(Degree)
(m) 2.76 H 2.76 H 2.76 H 2.76 H 2.93 H 2.93 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 112.51 PK 112.69 108.79 AV 108.97 62.34 PK 62.50 49.91 AV 50.07 54.78 PK 48.67 52.42 AV 46.31 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 106.13 104.20 61.33 48.92 46.96 43.18 LEVEL
(dBuV/m) 105.95 PK 104.02 AV 61.17 PK 48.76 AV 53.07 PK 49.29 AV
(m) 1.12 V 1.12 V 1.12 V 1.12 V 1.85 V 1.85 V TABLE ANGLE
(Degree)
-12.83
-5.24
-20.93
-4.71 74 74 74 74 227 227 51 51 51 51 107 107 74.00 54.00 74.00 54.00 ANTENNA HEIGHT
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m)
-0.18
-0.18
-0.16
-0.16 6.11 6.11 CORRECTION FACTOR
(dB/m)
-0.18
-0.18
-0.16
-0.16 6.11 6.11 NO. 1 2 3 4 5 6 FREQ.
(MHz)
*2462.00
*2462.00 2483.50 2483.50 4924.00 4924.00 NO. FREQ.
(MHz) 1 2 3 4 5 6
*2462.00
*2462.00 2483.50 2483.50 4924.00 4924.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. Report No.: RF190225D05 Page No. 20 / 53 Report Format Version: 6.1.1 802.11g CHANNEL TX Channel 1 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV) NO. 1 2 3 4 5 6 FREQ.
(MHz) 2390.00 2390.00
*2412.00
*2412.00 4824.00 4824.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2412.00
*2412.00 4824.00 4824.00 REMARKS:
(dB) LIMIT MARGIN
(dBuV/m)
-1.66
-2.04 74.00 54.00 74.00 54.00 ANTENNA HEIGHT TABLE ANGLE
(Degree)
(m) 2.86 H 2.86 H 2.86 H 2.86 H 3.14 H 3.14 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 72.34 PK 72.56 51.96 AV 52.18 110.52 PK 110.73 100.21 AV 100.42 48.00 PK 41.62 34.51 AV 28.13 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 64.58 44.97 102.81 92.53 40.92 27.68 LEVEL
(dBuV/m) 64.36 PK 44.75 AV 102.60 PK 92.32 AV 47.30 PK 34.06 AV
(m) 1.00 V 1.00 V 1.00 V 1.00 V 1.67 V 1.67 V TABLE ANGLE
(Degree) 34 34 34 34 155 155 80 80 80 80 223 223 ANTENNA HEIGHT
-26.70
-19.94
-26.00
-19.49 74.00 54.00 74.00 54.00
-9.64
-9.25
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m)
-0.22
-0.22
-0.21
-0.21 6.38 6.38 CORRECTION FACTOR
(dB/m)
-0.22
-0.22
-0.21
-0.21 6.38 6.38 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. Report No.: RF190225D05 Page No. 21 / 53 Report Format Version: 6.1.1 CHANNEL TX Channel 6 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN
(dBuV/m) 74.00 54.00
-10.72
-7.66 ANTENNA HEIGHT 74.00 54.00 74.00 54.00
-2.66
-1.10
-19.54
-12.65 TABLE ANGLE
(Degree) 97 97 97 97 97 97 245 245
(m) 2.10 H 2.10 H 2.10 H 2.10 H 2.10 H 2.10 H 2.70 H 2.70 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 63.28 PK 63.50 46.34 AV 46.56 113.35 PK 113.55 103.98 AV 104.18 71.34 PK 71.50 52.90 AV 53.06 54.46 PK 48.28 41.35 AV 35.17 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 58.64 45.12 105.18 95.89 65.48 48.11 47.34 33.91 LEVEL
(dBuV/m) 58.42 PK 44.90 AV 104.98 PK 95.69 AV 65.32 PK 47.95 AV 53.52 PK 40.09 AV
(m) 1.06 V 1.06 V 1.06 V 1.06 V 1.06 V 1.06 V 1.75 V 1.75 V 43 43 43 43 43 43 136 136 TABLE ANGLE
(Degree)
-8.68
-6.05
-20.48
-13.91 74.00 54.00 74.00 54.00 ANTENNA HEIGHT
-15.58
-9.10 74.00 54.00
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m)
-0.22
-0.22
-0.20
-0.20
-0.16
-0.16 6.18 6.18 CORRECTION FACTOR
(dB/m)
-0.22
-0.22
-0.20
-0.20
-0.16
-0.16 6.18 6.18 NO. 1 2 3 4 5 6 7 8 FREQ.
(MHz) 2390.00 2390.00
*2437.00
*2437.00 2483.50 2483.50 4874.00 4874.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 2390.00 2390.00
*2437.00
*2437.00 2483.50 2483.50 4874.00 4874.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. Report No.: RF190225D05 Page No. 22 / 53 Report Format Version: 6.1.1 CHANNEL TX Channel 11 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN
(dBuV/m) ANTENNA HEIGHT 74.00 54.00 74.00 54.00
-1.02
-2.42
-26.46
-19.83 TABLE ANGLE
(Degree)
(m) 2.77 H 2.77 H 2.77 H 2.77 H 3.02 H 3.02 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 109.46 PK 109.64 99.32 AV 99.50 72.98 PK 73.14 51.58 AV 51.74 47.54 PK 41.43 34.17 AV 28.06 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 102.27 92.15 68.13 47.92 40.78 27.53 LEVEL
(dBuV/m) 102.09 PK 91.97 AV 67.97 PK 47.76 AV 46.89 PK 33.64 AV
(m) 1.01 V 1.01 V 1.01 V 1.01 V 1.84 V 1.84 V TABLE ANGLE
(Degree)
-6.03
-6.24
-27.11
-20.36 81 81 81 81 235 235 55 55 55 55 122 122 74.00 54.00 74.00 54.00 ANTENNA HEIGHT
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m)
-0.18
-0.18
-0.16
-0.16 6.11 6.11 CORRECTION FACTOR
(dB/m)
-0.18
-0.18
-0.16
-0.16 6.11 6.11 NO. 1 2 3 4 5 6 FREQ.
(MHz)
*2462.00
*2462.00 2483.50 2483.50 4924.00 4924.00 NO. FREQ.
(MHz) 1 2 3 4 5 6
*2462.00
*2462.00 2483.50 2483.50 4924.00 4924.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. Report No.: RF190225D05 Page No. 23 / 53 Report Format Version: 6.1.1 802.11n (20MHz) CHANNEL TX Channel 1 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV) NO. 1 2 3 4 5 6 FREQ.
(MHz) 2390.00 2390.00
*2412.00
*2412.00 4824.00 4824.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2412.00
*2412.00 4824.00 4824.00 REMARKS:
(dB) LIMIT MARGIN
(dBuV/m)
-2.09
-1.57 74.00 54.00 74.00 54.00 ANTENNA HEIGHT TABLE ANGLE
(Degree)
(m) 2.85 H 2.85 H 2.85 H 2.85 H 3.27 H 3.27 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW LEVEL VALUE
(dBuV/m)
(dBuV) 71.91 PK 72.13 52.43 AV 52.65 109.28 PK 109.49 99.06 AV 99.27 47.88 PK 41.50 34.63 AV 28.25 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 64.33 44.54 101.77 91.63 40.82 27.51 LEVEL
(dBuV/m) 64.11 PK 44.32 AV 101.56 PK 91.42 AV 47.20 PK 33.89 AV
(m) 1.03 V 1.03 V 1.03 V 1.03 V 1.71 V 1.71 V TABLE ANGLE
(Degree) 41 41 41 41 142 142 84 84 84 84 220 220 ANTENNA HEIGHT
-26.12
-19.37
-26.80
-20.11 74.00 54.00 74.00 54.00
-9.89
-9.68
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m)
-0.22
-0.22
-0.21
-0.21 6.38 6.38 CORRECTION FACTOR
(dB/m)
-0.22
-0.22
-0.21
-0.21 6.38 6.38 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. Report No.: RF190225D05 Page No. 24 / 53 Report Format Version: 6.1.1 CHANNEL TX Channel 6 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN
(dBuV/m) 74.00 54.00 ANTENNA HEIGHT TABLE ANGLE
(Degree)
(m) 2.80 H 2.80 H 3.09 H 3.09 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 112.56 PK 112.76 103.21 AV 103.41 53.85 PK 47.67 41.03 AV 34.85 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 104.88 94.96 45.92 33.16 LEVEL
(dBuV/m) 104.68 PK 94.76 AV 52.10 PK 39.34 AV
(m) 1.10 V 1.10 V 1.90 V 1.90 V TABLE ANGLE
(Degree) ANTENNA HEIGHT 46 46 134 134 79 79 227 227
-21.90
-14.66
-20.15
-12.97 74.00 54.00
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m)
-0.20
-0.20 6.18 6.18 CORRECTION FACTOR
(dB/m)
-0.20
-0.20 6.18 6.18 NO. 1 2 3 4 FREQ.
(MHz)
*2437.00
*2437.00 4874.00 4874.00 NO. FREQ.
(MHz) 1 2 3 4
*2437.00
*2437.00 4874.00 4874.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. Report No.: RF190225D05 Page No. 25 / 53 Report Format Version: 6.1.1 CHANNEL TX Channel 11 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN
(dBuV/m) ANTENNA HEIGHT 74.00 54.00 74.00 54.00
-3.33
-1.09
-26.99
-19.85 TABLE ANGLE
(Degree)
(m) 2.88 H 2.88 H 2.88 H 2.88 H 3.16 H 3.16 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 108.14 PK 108.32 98.30 AV 98.48 70.67 PK 70.83 52.91 AV 53.07 47.01 PK 40.90 34.15 AV 28.04 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 103.53 93.76 67.10 48.62 40.29 27.56 LEVEL
(dBuV/m) 103.35 PK 93.58 AV 66.94 PK 48.46 AV 46.40 PK 33.67 AV
(m) 2.76 V 2.76 V 2.76 V 2.76 V 1.82 V 1.82 V TABLE ANGLE
(Degree)
-7.06
-5.54
-27.60
-20.33 217 217 217 217 131 131 83 83 83 83 217 217 74.00 54.00 74.00 54.00 ANTENNA HEIGHT
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m)
-0.18
-0.18
-0.16
-0.16 6.11 6.11 CORRECTION FACTOR
(dB/m)
-0.18
-0.18
-0.16
-0.16 6.11 6.11 NO. 1 2 3 4 5 6 FREQ.
(MHz)
*2462.00
*2462.00 2483.50 2483.50 4924.00 4924.00 NO. FREQ.
(MHz) 1 2 3 4 5 6
*2462.00
*2462.00 2483.50 2483.50 4924.00 4924.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. Report No.: RF190225D05 Page No. 26 / 53 Report Format Version: 6.1.1 802.11n (40MHz) CHANNEL TX Channel 3 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV) NO. 1 2 3 4 5 6 FREQ.
(MHz) 2390.00 2390.00
*2422.00
*2422.00 4844.00 4844.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2422.00
*2422.00 4844.00 4844.00 REMARKS:
(dB) LIMIT MARGIN
(dBuV/m)
-5.78
-1.17 74.00 54.00 74.00 54.00 ANTENNA HEIGHT TABLE ANGLE
(Degree)
(m) 2.24 H 2.24 H 2.24 H 2.24 H 1.58 H 1.58 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW LEVEL VALUE
(dBuV/m)
(dBuV) 68.22 PK 68.44 52.83 AV 53.05 106.79 PK 106.99 96.56 AV 96.76 47.38 PK 41.09 34.82 AV 28.53 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 66.09 49.94 103.60 93.39 40.55 27.63 LEVEL
(dBuV/m) 65.87 PK 49.72 AV 103.40 PK 93.19 AV 46.84 PK 33.92 AV
(m) 1.00 V 1.00 V 1.00 V 1.00 V 1.88 V 1.88 V TABLE ANGLE
(Degree) 86 86 86 86 234 234 ANTENNA HEIGHT 41 41 41 41 21 21
-26.62
-19.18
-27.16
-20.08 74.00 54.00 74.00 54.00
-8.13
-4.28
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m)
-0.22
-0.22
-0.20
-0.20 6.29 6.29 CORRECTION FACTOR
(dB/m)
-0.22
-0.22
-0.20
-0.20 6.29 6.29 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. Report No.: RF190225D05 Page No. 27 / 53 Report Format Version: 6.1.1 CHANNEL TX Channel 6 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN
(dBuV/m)
-7.79
-4.06 74.00 54.00 ANTENNA HEIGHT 74.00 54.00 74.00 54.00
-3.66
-1.04
-26.65
-19.21 TABLE ANGLE
(Degree) 247 247 247 247 247 247 223 223
(m) 1.53 H 1.53 H 1.53 H 1.53 H 1.53 H 1.53 H 1.96 H 1.96 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 66.21 PK 66.43 49.94 AV 50.16 108.73 PK 108.93 98.49 AV 98.69 70.34 PK 70.50 52.96 AV 53.12 47.35 PK 41.17 34.79 AV 28.61 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 62.54 46.33 105.26 95.09 66.69 50.33 40.55 27.62 LEVEL
(dBuV/m) 62.32 PK 46.11 AV 105.06 PK 94.89 AV 66.53 PK 50.17 AV 46.73 PK 33.80 AV
(m) 1.02 V 1.02 V 1.02 V 1.02 V 1.02 V 1.02 V 1.28 V 1.28 V 56 56 56 56 56 56 129 129 TABLE ANGLE
(Degree)
-7.47
-3.83
-27.27
-20.20 74.00 54.00 74.00 54.00 ANTENNA HEIGHT
-11.68
-7.89 74.00 54.00
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m)
-0.22
-0.22
-0.20
-0.20
-0.16
-0.16 6.18 6.18 CORRECTION FACTOR
(dB/m)
-0.22
-0.22
-0.20
-0.20
-0.16
-0.16 6.18 6.18 NO. 1 2 3 4 5 6 7 8 FREQ.
(MHz) 2390.00 2390.00
*2437.00
*2437.00 2483.50 2483.50 4874.00 4874.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 2390.00 2390.00
*2437.00
*2437.00 2483.50 2483.50 4874.00 4874.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. Report No.: RF190225D05 Page No. 28 / 53 Report Format Version: 6.1.1 CHANNEL TX Channel 9 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN
(dBuV/m) ANTENNA HEIGHT 74.00 54.00 74.00 54.00
-7.19
-1.42
-26.15
-19.84 TABLE ANGLE
(Degree)
(m) 1.51 H 1.51 H 1.51 H 1.51 H 1.69 H 1.69 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 106.11 PK 106.29 95.98 AV 96.16 66.81 PK 66.97 52.58 AV 52.74 47.85 PK 41.75 34.16 AV 28.06 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 102.66 92.48 63.02 49.68 40.06 27.23 LEVEL
(dBuV/m) 102.48 PK 92.30 AV 62.86 PK 49.52 AV 46.16 PK 33.33 AV
(m) 1.03 V 1.03 V 1.03 V 1.03 V 1.77 V 1.77 V TABLE ANGLE
(Degree)
-11.14
-4.48
-27.84
-20.67 246 246 246 246 184 184 38 38 38 38 291 291 74.00 54.00 74.00 54.00 ANTENNA HEIGHT
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m)
-0.18
-0.18
-0.16
-0.16 6.10 6.10 CORRECTION FACTOR
(dB/m)
-0.18
-0.18
-0.16
-0.16 6.10 6.10 NO. 1 2 3 4 5 6 FREQ.
(MHz)
*2452.00
*2452.00 2483.50 2483.50 4904.00 4904.00 NO. FREQ.
(MHz) 1 2 3 4 5 6
*2452.00
*2452.00 2483.50 2483.50 4904.00 4904.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. Report No.: RF190225D05 Page No. 29 / 53 Report Format Version: 6.1.1 Below 1GHz Data:
802.11b CHANNEL TX Channel 6 FREQUENCY RANGE 9kHz ~ 1GHz DETECTOR FUNCTION Quasi-Peak (QP) NO. FREQ.
(MHz) 1 2 3 4 5 6 102.31 159.01 264.01 294.91 319.50 455.98 REMARKS:
(dB) LIMIT MARGIN
(dBuV/m) ANTENNA HEIGHT ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION VALUE
(dBuV) 37.62 32.39 40.89 38.03 38.21 36.18 LEVEL
(dBuV/m) 26.62 QP 25.71 QP 34.55 QP 32.83 QP 33.70 QP 34.26 QP
(m) 1.87 H 1.92 H 1.55 H 1.49 H 1.08 H 1.15 H
-16.88
-17.79
-11.45
-13.17
-12.30
-11.74 43.50 43.50 46.00 46.00 46.00 46.00 TABLE ANGLE
(Degree) 301 290 99 97 271 257 CORRECTION FACTOR
(dB/m)
-11.00
-6.68
-6.34
-5.20
-4.51
-1.92 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit of frequency range 30MHz~1000MHz. 5. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report. Report No.: RF190225D05 Page No. 30 / 53 Report Format Version: 6.1.1 CHANNEL TX Channel 6 FREQUENCY RANGE 9kHz ~ 1GHz DETECTOR FUNCTION Quasi-Peak (QP)
(dB) LIMIT MARGIN
(dBuV/m) ANTENNA HEIGHT ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 38.90 40.94 31.00 39.08 40.51 33.24 LEVEL
(dBuV/m) 31.78 QP 29.75 QP 23.70 QP 33.88 QP 37.30 QP 31.67 QP
(m) 1.15 V 1.64 V 1.52 V 1.24 V 1.10 V 1.08 V
-8.22
-10.25
-19.80
-12.12
-8.70
-14.33 40.00 40.00 43.50 46.00 46.00 46.00 TABLE ANGLE
(Degree) 158 296 160 58 142 91 CORRECTION FACTOR
(dB/m)
-7.12
-11.19
-7.30
-5.20
-3.21
-1.57 NO. FREQ.
(MHz) 1 2 3 4 5 6 47.80 78.16 140.73 294.91 408.01 480.03 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. Margin value = Emission Level Limit value 4. The other emission levels were very low against the limit of frequency range 30MHz~1000MHz. 5. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report. Report No.: RF190225D05 Page No. 31 / 53 Report Format Version: 6.1.1 4.2 Conducted Emission Measurement 4.2.1 Limits of Conducted Emission Measurement Frequency (MHz) 0.15 - 0.5 0.50 - 5.0 5.0 - 30.0 Quasi-peak 66 - 56 56 60 Conducted Limit (dBuV) Average 56 - 46 46 50 Note: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. Description & Manufacturer Model No. Serial No. Cal. Date Cal. Due 4.2.2 Test Instruments ROHDE & SCHWARZ TEST RECEIVER ROHDE & SCHWARZ Artificial Mains Network (For EUT) LISN With Adapter (for EUT) EMCO L.I.S.N. (For peripherals) SCHWARZBECK Artificial Mains Network (For EUT) Software RF cable (JYEBAO) With10dB PAD LYNICS Terminator (For EMCO LISN) LYNICS Terminator (For EMCO LISN) ROHDE & SCHWARZ Artificial Mains Network (For TV EUT) LISN With Adapter (for TV EUT) Note:
ESCS 30 838251/021 Nov. 1, 2018 Oct. 31, 2019 ENV216 AD10 3825/2 NNLK8129 Cond_V7.3.7.4 5D-FB 0900510 0900510 ESH3-Z5 100220 101195 C03Ada-002 9504-2359 8129229 May 2, 2018 May 1, 2019 May 2, 2018 May 1, 2019 Jul. 26, 2018 Jul. 25, 2019 May 3, 2018 May 2, 2019 NA NA NA E1-01-300 E1-01-301 100220 Cable-C03.01 Sep. 18, 2018 Sep. 17, 2019 Jan. 25, 2019 Jan. 24, 2020 Jan. 25, 2019 Jan. 24, 2020 Nov. 21, 2018 Nov. 20, 2019 Nov. 21, 2018 Nov. 20, 2019 N/A 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Shielded Room No. 3. Report No.: RF190225D05 Page No. 32 / 53 Report Format Version: 6.1.1 4.2.3 Test Procedures a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) was not recorded. NOTE: The resolution bandwidth and video bandwidth of test receiver is 9kHz for quasi-peak detection
(QP) and average detection (AV) at frequency 0.15MHz-30MHz. 4.2.4 Deviation from Test Standard No deviation. 4.2.5 Test Setup Vertical Ground Reference Plane 40cm EUT LISN 80cm Test Receiver Note: 1.Support units were connected to second LISN. Horizontal Ground Reference Plane For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.2.6 EUT Operating Conditions Same as 4.1.6. Report No.: RF190225D05 Page No. 33 / 53 Report Format Version: 6.1.1 4.2.7 Test Results Phase Freq. No
[MHz]
0.16172 0.22422 0.52109 1.69141 3.29297 6.09766 1 2 3 4 5 6 REMARKS:
Line (L) Detector Function Quasi-Peak (QP) /
Average (AV) Corr. Factor
(dB) 9.71 9.71 9.77 9.90 9.99 10.08 Reading Value Emission Level
[dB (uV)]
[dB (uV)]
Limit
[dB (uV)]
Margin
(dB) Q.P. 43.86 36.28 26.16 18.36 18.40 14.62 AV. 29.04 21.72 14.46 3.28 6.02 4.74 Q.P. 53.57 45.99 35.93 28.26 28.39 24.70 AV. 38.75 31.43 24.23 13.18 16.01 14.82 Q.P. 65.38 62.66 56.00 56.00 56.00 60.00 AV. 55.38 52.66 46.00 46.00 46.00 50.00 Q.P.
-11.81
-16.67
-20.07
-27.74
-27.61
-35.30 AV.
-16.63
-21.23
-21.77
-32.82
-29.99
-35.18 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF190225D05 Page No. 34 / 53 Report Format Version: 6.1.1 Phase No Freq.
[MHz]
0.16172 0.22422 0.28281 0.53672 3.28516 6.10156 1 2 3 4 5 6 REMARKS:
Neutral (N) Detector Function Quasi-Peak (QP) /
Average (AV) Corr. Factor
(dB) 9.72 9.73 9.74 9.79 9.98 10.07 Reading Value Emission Level
[dB (uV)]
[dB (uV)]
Limit
[dB (uV)]
Margin
(dB) Q.P. 45.00 37.78 32.80 27.28 19.68 15.28 AV. 29.86 22.42 19.66 20.14 12.26 9.14 Q.P. 54.72 47.51 42.54 37.07 29.66 25.35 AV. 39.58 32.15 29.40 29.93 22.24 19.21 Q.P. 65.38 62.66 60.73 56.00 56.00 60.00 AV. 55.38 52.66 50.73 46.00 46.00 50.00 Q.P.
-10.66
-15.15
-18.19
-18.93
-26.34
-34.65 AV.
-15.80
-20.51
-21.33
-16.07
-23.76
-30.79 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF190225D05 Page No. 35 / 53 Report Format Version: 6.1.1 4.3 4.3.1 Limits of 6dB Bandwidth Measurement 6dB Bandwidth Measurement The minimum of 6dB Bandwidth Measurement is 0.5 MHz. 4.3.2 Test Setup EUT 4.3.3 Test Instruments Attenuator Spectrum Analyzer Refer to section 4.1.2 to get information of above instrument. 4.3.4 Test Procedure a. Set resolution bandwidth (RBW) = 100kHz b. Set the video bandwidth (VBW) 3 x RBW, Detector = Peak. c. Trace mode = max hold. d. Sweep = auto couple. e. Measure the maximum width of the emission that is constrained by the frequencies associated with the two amplitude points (upper and lower) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission 4.3.5 Deviation fromTest Standard No deviation. 4.3.6 EUT Operating Conditions The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF190225D05 Page No. 36 / 53 Report Format Version: 6.1.1 4.3.7 Test Result 802.11b Channel Frequency (MHz) 6dB Bandwidth (MHz) 1 6 11 802.11g 2412 2437 2462 10.11 10.11 10.12 Channel Frequency (MHz) 6dB Bandwidth (MHz) 16.40 16.39 16.38 Minimum Limit
(MHz) Pass / Fail 0.5 0.5 0.5 PASS PASS PASS Minimum Limit
(MHz) Pass / Fail 0.5 0.5 0.5 PASS PASS PASS 1 6 11 2412 2437 2462 802.11n (20MHz) Channel Frequency (MHz) 1 6 11 2412 2437 2462 802.11n (40MHz) Channel Frequency (MHz) 3 6 9 2422 2437 2452 6dB Bandwidth (MHz) Chain 0 17.36 17.59 17.57 Chain 1 17.36 17.57 17.57 Minimum Limit
(MHz) Pass / Fail 0.5 0.5 0.5 PASS PASS PASS 6dB Bandwidth (MHz) Chain 0 35.81 36.15 35.77 Chain 1 35.83 36.14 35.76 Minimum Limit
(MHz) Pass / Fail 0.5 0.5 0.5 PASS PASS PASS Report No.: RF190225D05 Page No. 37 / 53 Report Format Version: 6.1.1 802.11b : CH1 Spectrum Plot of Worst Value 802.11g : CH11 802.11n (20MHz) / Chain 0 : CH1 802.11n (40MHz) / Chain 1 : CH9 Report No.: RF190225D05 Page No. 38 / 53 Report Format Version: 6.1.1 4.4 Conducted Output Power Measurement 4.4.1 Limits of Conducted Output Power Measurement For systems using digital modulation in the 24002483.5 MHz bands: 1 Watt (30dBm) Per KDB 662911 D01 Multiple Transmitter Output Method of conducted output power measurement on IEEE 802.11 devices, Array Gain = 0 dB (i.e., no array gain) for NANT 4;
Array Gain = 0 dB (i.e., no array gain) for channel widths 40 MHz for any NANT;
Array Gain = 5 log(NANT/NSS) dB or 3 dB, whichever is less for 20-MHz channel widths with NANT 5. For power measurements on all other devices: Array Gain = 10 log(NANT/NSS) dB. 4.4.2 Test Setup Attenuator Power Sensor Power Meter EUT 4.4.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.4.4 Test Procedures A peak power sensor was used on the output port of the EUT. A power meter was used to read the response of the peak power sensor. Record the power level. Average power sensor was used to perform output power measurement, trigger and gating function of wide band power meter is enabled to measure max output power of TX on burst. Duty factor is not added to measured value. 4.4.5 Deviation from Test Standard No deviation. 4.4.6 EUT Operating Conditions Same as Item 4.3.6. Report No.: RF190225D05 Page No. 39 / 53 Report Format Version: 6.1.1 4.4.7 Test Results FOR PEAK POWER 802.11b Chan. 1 6 11 802.11g Chan. 1 6 11 Freq.
(MHz) 2412 2437 2462 Freq.
(MHz) 2412 2437 2462 802.11n (20MHz) Chan. 1 6 11 Freq.
(MHz) 2412 2437 2462 802.11n (40MHz) Freq.
(MHz) 2422 2437 2452 Chan. 3 6 9 Report No.: RF190225D05 Peak Power (mW) Peak Power (dBm) 111.686 113.240 114.815 20.48 20.54 20.60 Peak Power (mW) Peak Power (dBm) 352.371 366.438 356.451 Peak Power (dBm) Chain 0 25.57 25.65 25.68 Chain 1 25.45 25.58 25.60 Peak Power (dBm) Chain 1 15.24 25.07 24.31 Chain 0 25.27 25.15 24.34 25.47 25.64 25.52 Total Power
(mW) 711.331 728.692 732.906 Total Power
(mW) 369.932 648.707 541.418 Total Power
(dBm) 28.52 28.63 28.65 Total Power
(dBm) 25.68 28.12 27.34 Limit
(dBm) Pass / Fail 30 30 30 Pass Pass Pass Limit
(dBm) Pass / Fail 30 30 30 Pass Pass Pass Limit
(dBm) Pass / Fail 30 30 30 Pass Pass Pass Limit
(dBm) Pass / Fail 30 30 30 Pass Pass Pass Page No. 40 / 53 Report Format Version: 6.1.1 FOR AVERAGE POWER 802.11b Channel Frequency (MHz) 1 6 11 802.11g 2412 2437 2462 Channel Frequency (MHz) 1 6 11 2412 2437 2462 802.11n (20MHz) Chan. Frequency
(MHz) 1 6 11 2412 2437 2462 802.11n (40MHz) Chan. Frequency
(MHz) 3 6 9 2422 2437 2452 Average Power
(mW) 63.241 63.973 64.863 Average Power
(mW) 58.210 64.417 59.704 Average Power
(dBm) 18.01 18.06 18.12 Average Power
(dBm) 17.65 18.09 17.76 Avg. Power (dBm) Chain 0 18.38 18.44 18.49 Chain 1 18.21 18.37 18.43 Avg. Power (dBm) Chain 0 17.57 17.32 15.44 Chain 1 17.56 17.29 15.38 Total Power
(mW) Total Power
(dBm) 135.087 138.530 140.295 21.31 21.42 21.47 Total Power
(mW) Total Power
(dBm) 114.164 107.531 69.509 20.58 20.32 18.42 Report No.: RF190225D05 Page No. 41 / 53 Report Format Version: 6.1.1 4.5 Power Spectral Density Measurement 4.5.1 Limits of Power Spectral Density Measurement The Maximum of Power Spectral Density Measurement is 8dBm in any 3 kHz. 4.5.2 Test Setup 4.5.3 Test Instruments EUT Attenuator Spectrum Analyzer Refer to section 4.1.2 to get information of above instrument. 4.5.4 Test Procedure a. Set analyzer center frequency to DTS channel center frequency. b. Set the span to 1.5 times the DTS bandwidth. c. Set the RBW to: 3 kHz RBW 100 kHz. d. Set the VBW 3 RBW. e. Detector = peak. f. Sweep time = auto couple. g. Trace mode = max hold. h. Allow trace to fully stabilize. i. Use the peak marker function to determine the maximum amplitude level within the RBW. 4.5.5 Deviation from Test Standard No deviation. 4.5.6 EUT Operating Condition Same as Item 4.3.6 Report No.: RF190225D05 Page No. 42 / 53 Report Format Version: 6.1.1 4.5.7 Test Results 802.11b Channel 1 6 11 802.11g Channel 1 6 11 802.11n (20MHz) Freq.
(MHz) 2412 2437 2462 Freq.
(MHz) 2412 2437 2462 PSD
(dBm/3kHz) Limit
(dBm/3kHz)
-5.99
-5.61
-4.92 8 8 8 PSD
(dBm/3kHz) Limit
(dBm/3kHz)
-7.45
-7.90
-6.80 8 8 8 Pass
/Fail Pass Pass Pass Pass
/Fail Pass Pass Pass 0 PSD Limit Channel TX chain
(dBm/3kHz) Total PSD
(dBm/3kHz) Pass
/Fail Pass Pass Pass Pass Pass Pass NOTE: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 5.63dBi < 6dBi , so the power density limit is not 10 log
(N=2) dB 3.01 3.01 3.01 3.01 3.01 3.01 Freq.
(MHz) 2412 2437 2462 2412 2437 2462
-7.68
-8.03
-7.31
-7.36
-7.08
-7.43
-4.67
-5.02
-4.30
-4.35
-4.07
-4.42 1 6 11 1 6 11 8 8 8 8 8 8
(dBm/3kHz) 1 reduced. 802.11n (40MHz) 0 PSD Limit Channel TX chain Total PSD
(dBm/3kHz) Pass
/Fail Pass Pass Pass Pass Pass Pass NOTE: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 5.63dBi < 6dBi , so the power density limit is not
(dBm/3kHz)
-11.42
-11.80
-14.47
-12.30
-11.85
-14.18 10 log
(N=2) dB 3.01 3.01 3.01 3.01 3.01 3.01 Freq.
(MHz) 2422 2437 2452 2422 2437 2452
-8.41
-8.79
-11.46
-9.29
-8.84
-11.17 8 8 8 8 8 8 3 6 9 3 6 9
(dBm/3kHz) 1 reduced. Report No.: RF190225D05 Page No. 43 / 53 Report Format Version: 6.1.1 802.11b : CH11 Spectrum Plot of Worst Value 802.11g : CH11 802.11n (20MHz) / Chain 1 : CH6 802.11n (40MHz) / Chain 0 : CH3 Report No.: RF190225D05 Page No. 44 / 53 Report Format Version: 6.1.1 4.6 Conducted Out of Band Emission Measurement 4.6.1 Limits of Conducted Out of Band Emission Measurement Below -20dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.6.2 Test Setup EUT Attenuator Spectrum Analyzer 4.6.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.6.4 Test Procedure MEASUREMENT PROCEDURE REF 1. Set the RBW = 100 kHz. 2. Set the VBW 300 kHz. 3. Detector = peak. 4. Sweep time = auto couple. 5. Trace mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. MEASUREMENT PROCEDURE OOBE 1. Set RBW = 100 kHz. 2. Set VBW 300 kHz. 3. Detector = peak. 4. Sweep = auto couple. 5. Trace Mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum amplitude level. 4.6.5 Deviation from Test Standard No deviation. 4.6.6 EUT Operating Condition Same as Item 4.3.6 4.6.7 Test Results The spectrum plots are attached on the following pages. D1 line indicates the highest level, and D2 line indicates the 20dB offset below D1. It shows compliance with the requirement. Report No.: RF190225D05 Page No. 45 / 53 Report Format Version: 6.1.1 802.11b:
CH 1 CH 6 CH 11 CH 1 Band edge CH 11 Band edge Report No.: RF190225D05 Page No. 46 / 53 Report Format Version: 6.1.1 802.11g:
CH 1 CH 6 CH 11 CH 1 Band edge CH 11 Band edge Report No.: RF190225D05 Page No. 47 / 53 Report Format Version: 6.1.1 802.11n (20MHz): Chain 0 CH 1 CH 6 CH 11 CH 1 Band edge CH 11 Band edge Report No.: RF190225D05 Page No. 48 / 53 Report Format Version: 6.1.1 Chain 1 CH 1 CH 6 CH 11 CH 1 Band edge CH 11 Band edge Report No.: RF190225D05 Page No. 49 / 53 Report Format Version: 6.1.1 802.11n (40MHz): Chain 0 CH 3 CH 6 CH 9 CH 3 Band edge CH 9 Band edge Report No.: RF190225D05 Page No. 50 / 53 Report Format Version: 6.1.1 Chain 1 CH 3 CH 6 CH 9 CH 3 Band edge CH 9 Band edge Report No.: RF190225D05 Page No. 51 / 53 Report Format Version: 6.1.1 5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF190225D05 Page No. 52 / 53 Report Format Version: 6.1.1 Appendix Information of the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following:
Lin Kou EMC/RF Lab Tel: 886-2-26052180 Fax: 886-2-26051924 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com Hsin Chu EMC/RF/Telecom Lab Tel: 886-3-6668565 Fax: 886-3-6668323 The address and road map of all our labs can be found in our web site also.
--- END ---
Report No.: RF190225D05 Page No. 53 / 53 Report Format Version: 6.1.1
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-04-03 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
2 | 2412 ~ 2462 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2019-04-03
|
||||
1 2 | Applicant's complete, legal business name |
Sercomm Corporation
|
||||
1 2 | FCC Registration Number (FRN) |
0015548027
|
||||
1 2 | Physical Address |
8F, No. 3-1, YuanQu St, NanKang
|
||||
1 2 |
Taipei
|
|||||
1 2 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
c******@nacsemc.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
P27
|
||||
1 2 | Equipment Product Code |
RC8335PRO
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
N**** W******
|
||||
1 2 | Title |
Engineer
|
||||
1 2 | Telephone Number |
886-2******** Extension:
|
||||
1 2 | Fax Number |
886-2********
|
||||
1 2 |
N******@SERCOMM.COM
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
1 2 | DTS - Digital Transmission System | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | SmartThings Smart Camera, SmartThings Cam | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Output power listed is maximum combined conducted. The antenna(s) must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40 and 80 MHz bandwidth modes. | ||||
1 2 | Output power listed is maximum combined conducted. The antenna(s) must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 and 40 MHz bandwidth modes. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
|
||||
1 2 | Name |
E****** L******
|
||||
1 2 | Telephone Number |
+886-********
|
||||
1 2 | Fax Number |
+886-********
|
||||
1 2 |
e******@tw.bureauveritas.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | CC MO | 5180 | 5240 | 0.13 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | CC MO | 5745 | 5825 | 0.131 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC MO | 2412.00000000 | 2462.00000000 | 0.7330000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC