FCC ID: P27RC8520S Wireless Full HD Network Camera

Wireless Full HD Network Camera i Users Guide Table of Contents CHAPTER 1 INTRODUCTION.............................................................................................. 1 Overview ............................................................................................................................ 1 Physical Details - Wireless Indoor Camera ..................................................................... 2 Package Contents .............................................................................................................. 4 CHAPTER 2 BASIC SETUP ................................................................................................... 5 System Requirements ........................................................................................................ 5 Installation ......................................................................................................................... 5 Wall/Ceiling Installation ................................................................................................... 6 CHAPTER 3 VIEWING LIVE VIDEO .................................................................................. 7 Overview ............................................................................................................................ 7 Requirements ..................................................................................................................... 7 Connecting to a Camera on your WLAN ........................................................................ 7 APPENDIX A REGULATORY APPROVALS ...................................................................... 9 Regulatory Approvals ....................................................................................................... 9 Copyright 2021. All Rights Reserved. Document Version: 1.0 All trademarks and trade names are the properties of their respective owners. i Chapter 1 Introduction 1 This Chapter provides information of the Wireless Indoor Camera's features, components and capabilities. Congratulations on the purchase of your new Wireless Indoor Camera. This Camera is a Camera with 1080p resolution and 802.11n WiFi connectivity. Overview Features Standalone Design. The Wireless Indoor Camera is a standalone system with built-in CPU and Video encoder. It requires only a power source and a connection to your Wireless device. Suitable for Home, Business or Public Facilities. Whether for Home, Business or Public Facility surveillance, or just for entertainment and fun, the Wireless Indoor Camera has the features you need. Day/Night Switch. With the day/night switching feature, you are able to view and record better images even in the dark of night. Micro SD Card Slot. With the slot, you can insert the Micro SD card to store recording files. Audio Support. You can listen as well as look! Audio is encoded with the video if desired. With built-in microphone, it is useful for bi-direction voice conversation. IR LED Support. Each Wireless Indoor Camera has one infrared LED. The LED can provide illumination around 5 meters long, that can help to output a better video quality while under low-light conditions such as indoors, on cloudy days, or in the morning/

evening. Privacy Mode Support. With the built-in privacy shutter, users can prevent others from viewing live video on a camera unless authorized by the client. Wireless Features Supports IEEE 802.11n Wireless Standard. The IEEE 802.11n standard provides backward compatibility with the IEEE 802.11b/g standards. The camera can work with all IEEE 802.11b/g/n Wireless stations. WPS Support. WPS (WiFi Protected Setup) can simplify the process of connecting any device to the wireless network by using the push button configuration (PBC) on the Wireless Indoor Camera, or entering a PIN code if there's no button. 1 Physical Details - Wireless Indoor Camera Front Panel Figure 1: Front Panel Lens Ensure that the lens cover is clean. The image quality is degraded if the lens cover is dirty or smudged. Privacy Shutter The shutter is used to provide privacy for users. The IR LED provides illumination at night or in a dark environment. The built-in microphone is used for bi-direction voice conversation. Light Sensor Hardware sensor to detect LUX. IR LED Microphone LED Table LED System LED Descriptions Off - Power off. Color Green On - Power is on and wireless connection is available. Flashing - Device is booting. Fast Flashing - WPS association is in process. Red On - Wireless connection is not available. Flashing - WPS association fails. Green+Red Flashing - Device is upgrading. Orange On - Privacy shutter function is on. 2 Back Panel Figure 2: Back Panel Micro SD Card Insert the Micro SD card into the slot, if required. WPS/Reset Button Push the WPS button on the camera and connect the wireless device to perform WPS function that easily creates an encryption-

secured wireless connection automatically. WPS PBC Mode. When pressed and released (less then 3 seconds), the Wireless Indoor Camera will be in the WPS PBC mode (Auto link mode). WPS Pin Code Mode. When pressed and held for 3-10 seconds, the Wireless Indoor Camera will be in the WPS Pin Code mode. Reset to manufacturer default valued and reboot. When pressed and held over 10 seconds, the settings of Wireless Indoor Camera will be set to their default values. Micro USB Port Connect the supplied 5V USB power adapter here. Do not use other power adapters; doing so may damage the camera. 3 Specification Model Wireless Full HD Network Camera Dimensions 72.1mm (W) x 142.3mm (H) x 39.2mm (D) Lens F2.0, DFOV 120 Operating Temperature 0 C to 40 C Storage Temperature

-20 C to 70 C Image resolution 1080p (1920*1080), 720p (1280*720) Video compression H.264 Network Protocols TCP/IP, HTTP, HTTPS, DHCP, SMTP, FTP, UPnP, NTP, RTCP, DNS Wireless interface IEEE 802.11n, WPA2 Personal Mixed Mode Power Adapter 5V / 1A, 100 - 240V Package Contents The following items should be included in the package: If any of these items are damaged or missing, please contact your dealer immediately. Figure 3: Package Contents 4 Chapter 2 Basic Setup 2 This Chapter provides information on how to install and configure the Wireless Indoor Camera. System Requirements To use the Wireless interface on the wireless model, other Wireless devices must be compliant with the IEEE802.11n, IEEE802.11b or IEEE802.11g specifications. All Wireless stations must use compatible settings. Mode: Infrastructure SSID: ANY Wireless Security: Disabled Domain: USA Channel No.: Auto Installation 1. Find the Location 2. Power Up Identify the location for the Wireless Indoor Camera. Connect the supplied 5V/1A micro-USB power adapter to the Wireless Indoor Camera and power up. Please wait until LED solid light. Note: Use only the power adapter provided. Using a different one may cause hardware damage.) Figure 4: Installation 5 3. Insert Micro SD Card Insert the micro SD card into the slot if needed. 4. Internet Connection Press the WPS button on the camera for 3-5 seconds and on your other wireless device as well to establish a wireless connection automatically. The wireless connection is successful when the LED (green) remains on. 5. Check the LEDs The LED will turn on briefly, then start blinking. It will blink during startup, which will take 55 to 57 seconds. After startup is completed, the green LED should remain ON. Wall/Ceiling Installation 1. Use a coin to release the mounting plate from the stand. Figure 5: Mounting Plate 2. Hold the mounting plate at the location where you would like to mount the camera and mark the location of the two mounting holes. 3. Drill two holes on the mounting surface at the marked locations. 4. Mount the plate to the surface using the two screws supplied. 5. Slide the camera stand onto the mounting plate until it clicks into place. Figure 6: Wall Mounting 6 Chapter 3 Viewing Live Video 3 This Chapter provides basic information about viewing live video. Overview After finishing setup via the Windows-based Wizard, all WLAN users can view live video using web browsers. This chapter has details of viewing live video using Web Browser. But many other powerful features and options are available:

The camera administrator can also adjust the Video Stream, and restrict access to the video stream to known users by requiring viewers to supply a username and password. To make Live Video from the camera available via the Internet, your Gateway or Router must be configured correctly. To view the live video stream generated by the Wireless Indoor Camera, you need to meet the following requirements:

Requirements Windows 8/9/10. Microsoft Edge, Firefox, Chrome. Connecting to a Camera on your WLAN To establish a connection from your PC to the Wireless Indoor Camera:

1. Start Web Browser. 2. In the Address box, enter "HTTP://" and the IP Address of the Wireless Indoor Camera. 7 3. When you connect, the following screen will be displayed. Figure 7: Home Screen 4. Click View Video. 5. The first time you connect to the camera, you will be prompted to install decoders. 6. Click "OK". If the Administrator has restricted access to known users, you will then be prompted for a username and password. Enter the name and password assigned to you by the Wireless Indoor Camera administrator. The default log-in Administration:

User Name: administrator Password: Blank 7. Video will start playing automatically. There may be a delay of a few seconds while the video stream is buffered. 8. Access the Administration for more Wireless Indoor Camera settings on GUI. Once the Wireless Indoor Camera is doing FW upgrade, it forbids cutting power off. 8 Appendix A Regulatory Approvals A Regulatory Approvals FCC Statement This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

(Example - use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 9 CE Approvals This device complies with Directive 2014/53/EU issued by the Commission of the European Community. Declaration of Conformity

-EN55032

-EN300328 This is a Class B product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. 10

1 2 3 4 Rev 1 5 Explain Release Name Keita Date A B C D 59.61 36.02 142.26 72.08 72.08 Label PC540 SLX2432T GSH2010+

MR200 L1225L PC540 VERSION CHANGE Refer to Table Level if Tolerance is not marked GRADE DIM. 0-8 8-25 25-80 80-250 A B C D 0.4 0.05 0.1 0.2 0.08 0.12 0.25 0.15 0.25 0.4 0.8 0.3 0.5 0.8 1.5 0.6 1.0 1.5 3.0 250-800 0.5 Top Secret MODEL RC8520S NAME Outline PART.NO Keita Wang Donald Lee Jerry Wang DSN CHK APV FILE Do Not Scale Drawing Tooling Name SCALE 1 / 1 SHEET 1 OF 1 DATE DIM IN MM 21-09-24 MATERIAL PC540 Q'TY 1/1 PC REV. A

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Sercomm Corporation 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name P27 P27RC8520S Nick Wu nick_wu@sercomm.com

+886-2-2655-3988, ext:2556 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

a) b) c) d) e) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

(1)

(2)

(3) labeling the equipment with the exact FCC ID as specified in this application, compliance statement labeling pursuant to the applicable rules, compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Date:October 6, 2021 Applicant Signature:

Print Name:

Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Nick Wu Engineer Applicant Declaration Rev:0.0

To:

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Sercomm Corporation 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan Regarding:

Confidentiality Request regarding application for FCC ID: P27RC8520S LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. If the device is marketed within 180 days of Schematic(s) Block Diagrams Operational Descriptions External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Nick Wu / Engineer Sercomm Corporation Phone: 886-2-2655-3988, ext:2556 E-Mail: nick_wu@sercomm.com

TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding FCC ID: P27RC8520S To whom it may concern:

Date: October 6, 2021 We, the undersigned, hereby authorize Kevin Tsai / Deputy Manager of SGS Compliance Certification Services Inc. respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. to act on our behalf in all manners relating to application for equipment authorization with We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Sercomm Corporation. This authorization is valid until further written notice from the applicant. Nick Wu / Engineer Sercomm Corporation Phone: 886-2-2655-3988, ext:2556 E-Mail: nick_wu@sercomm.com