all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 271.53 KiB | ||||
1 |
|
Internal Photos | Internal Photos | 2.75 MiB | ||||
1 |
|
External Photos | External Photos | 222.42 KiB | ||||
1 |
|
ID Label/Location Info | ID Label/Location Info | 1.14 MiB | ||||
1 | Block Diagram | Block Diagram | August 29 2017 | confidential | ||||
1 |
|
Confidentiality | Cover Letter(s) | 35.61 KiB | ||||
1 |
|
Declaration of authorization | Cover Letter(s) | 75.03 KiB | ||||
1 |
|
MPE | RF Exposure Info | 62.12 KiB | ||||
1 | Operational Description | Operational Description | August 29 2017 | confidential | ||||
1 | Schematics led board | Schematics | August 29 2017 | confidential | ||||
1 | Schematics main board | Schematics | August 29 2017 | confidential | ||||
1 | Schematics power board | Schematics | August 29 2017 | confidential | ||||
1 | Schematics sensor board | Schematics | August 29 2017 | confidential | ||||
1 |
|
Test Report | Test Report | 3.27 MiB | ||||
1 |
|
Test Setup Photos | Test Setup Photos | 412.45 KiB |
1 | Users Manual | Users Manual | 271.53 KiB |
Wireless HD Doorbell Camera m Confidential Sercom Document Version: 1.4 Copyright 2016. All Rights Reserved. All trademarks and trade names are the properties of their respective owners. Setup Guide i Doorbell Camera x 1 Package Contents 2. Micro USB to USB Cable x 1 3. Mounting Bracket with Anti-theft Screw x 1 The following items should be included: If any of these items are damaged or missing, please contact your service provider immediately. 1. m Confidential Sercom Splice Connectors x 2 5. Gradienter x 1 Screw/Anchor x 2 4. 6. 7. Allen Key m Confidential Sercom m Confidential Sercom 1 Overview This Chapter provides details of the Wireless HD Doorbell Camera's features, components and capabilities. Chapter 1 Introduction DBC831 is a WiFi enabled video doorbell camera that lets you answer the door from your iOS or Android mobile device no matter where you are in the world. This device features a video camera, built-in microphone and a speaker that allows you to see, hear and speak to your visitors from a smart phone, tablet or PC. (The customers are required to make their own APP or server which can communicate with doorbell camera. Sercomm can support the customized API for development based on customers definition.) It is also an all-in-one camera that has automatic and manual day/night switching, PIR sensor and IR illumination, which can provide illumination around 3 meters long under low light conditions in a simple, economical manner. This device, which attaches to your current doorbell wires, is easy to install and connects to your home internet through WiFi. When a visitor rings the doorbell, the device will send an alert to one or several people and each person can accept or ignore the call. m Confidential Sercom Figure 1: Network Diagram - Wireless HD Doorbell Camera 1 Product Features Dual Video Support. The Wireless HD Doorbell Camera can Day/Night Switch. With the day/night switching feature, you are the doorbell, so you can see who is outside. It also allows you to stream video, audio or both simultaneously. Features Doorbell Camera. Takes a snapshot/live video when a visitor rings NoteThe intercom is up to 2 minutes. Multiple Users Support. Allows for up to 5 users on an account so an entire family can receive alerts when a visitor rings the doorbell. support H.264 and MJEPG video for different image compression. Suitable for Home, Business or Public Facilities. Whether for Home, Business or Public Facility surveillance, the Wireless HD Doorbell Camera has the features you need. able to view and record better images even in the dark of night. IR LED Support. Each Wireless HD Doorbell Camera has a high power infrared LED. The LED can provide illumination around 3 meters, which can help to output a better video quality while under low-light conditions in the morning or evening. m Confidential Sercom Wireless Features Supports 11n Wireless Stations. The 802.11n standard provides for backward compatibility with the 802.11b standard, so 802.11n, 802.11b and 802.11g Wireless stations can be used simultaneously. PIR (Passive Infrared Sensor) Support. This device is embedded with a PIR Sensor, which senses infrared light radiating from human bodies in its field of 3 meters view. This feature is very helpful in enhancing home security systems. process of connecting any device to the wireless network by using the push button configuration (PBC) on the Wireless HD Doorbell Camera, or entering a PIN code if there's no button. wiring. It comes with the supplies you need to install on a variety of surfaces. Easy Installation. This device connects to your existing doorbell WiFi Connectivity. Makes it easy to link with your home wireless Wireless Network Support. The Wireless HD Doorbell Camera WPS Support. WPS (WiFi Protected Setup) can simplify the supports wireless transmission. network. 2 2 Front Panel - Wireless HD Doorbell Camera Physical Details - Wireless HD Doorbell Camera This Chapter provides details on how to install and configure the Wireless HD Doorbell Camera. Chapter 2 Basic Setup System Requirements To use the Wireless interface on the wireless model, other Wireless devices must be compliant with the IEEE802.11b, IEEE802.11g, or IEEE802.11n specifications. All Wireless stations must use compatible settings. m Confidential Sercom No physical adjustment is required or possible for the lens, but you should ensure that the lens cover remains clean. The image quality is degraded if the lens cover is dirty or smudged. This is hardware sensor to detect LUX and trigger the IR Cut Switch to switch day/night. Figure 2: Front Panel Light Sensor Lens 3 PIR LED Microphone WPS Pin Code Mode. When pressed Doorbell/WPS Button Note: when WiFi is connected, the WPS button is disabled. released (up to15 seconds), the Wireless HD Doorbell Camera will be in the WPS PBC mode (Auto link mode). and held for 5-15 seconds, the Wireless HD Doorbell Camera will be in the WPS Pin Code mode. and on your other wireless device to perform WPS function that easily creates an encryption-secured wireless connection automatically. WPS PBC Mode. When pressed and The built-in microphone is useful for bi-direction voice conversation. The sensor is used to help the camera to detect motion within 3 meters. This button has three functions:
1. WPS. Push the WPS button on the device m Confidential Sercom Fast Blinking (Amber) Driver upgrading NoteDo not power off the Doorbell while the driver upgrading. On (Blue) - Power on and PIR function is Breathing (Green) Intercom mode. On (Amber) - If the LED is on for 5 seconds, the WPS function is failed. 2. Doorbell. Press the button to ring the bell. 3. Power LED (Green/Amber/Blue) Off (Amber) - WPS pairing is complete if the LED is off after continuously blinking. This is where the visitor hears your speaking. Off (Blue) - The doorbell button is pressed Medium-Speed Blinking (Amber) WPS Off (Green/Amber/Blue)- No power or Slow Blinking (Amber) WPS PBC Pin function is active. function is active. sleep mode. by a visitor. triggered. Speaker 4 Figure 3: Rear Panel Rear Panel - Wireless HD Doorbell Camera Micro-USB Connector Use the micro USB cable included in the m Confidential Sercom package to plug in Micro USB connector for charging the battery. Use this switch to turn the device on/off Use a pin or paper clip to press and held over 10 seconds, the settings of Doorbell Camera will be set to factory default values. ON/OFF Switch Reset Button 5 Before You Begin Wireless HD Doorbell Camera Installation Checking Doorbell Chime Type (The customers require to develop their own App to switch the doorbell chime type) If your existing doorbell produces an electronic sound that is programmable and comes in the form of a unique sound, it's a digital chime. If it has a traditional "ding dong" sound, it's a compatible analog chime. Charging Doorbell Camera Use the supplied micro USB cable to recharge the battery while you are setting the doorbell camera first. After then, turn the doorbell camera switch (on the back) on. Make sure that the Doorbell Cameras internal battery has received enough power after youve mounted it to your doorbell wiring. m Confidential Sercom DBC831 requires connections to a doorbell chime and a transformer. Simply remove your existing doorbell button and connect one wire on the Doorbell Camera to the chime and the other wire to the transformer. Note: Please ensure that the Wireless HD Doorbell Camera is configured and added to the network before mounting it. Note: If DBC831 is using for engineering develop purpose, it is available to use Mirco USB cable to charge the battery for replacing the transformer. And doorbell does not require to attach with the chimer. Note: The Micro USB charger is only available on 5V2A adapter plug. Do not plug Micro USB cable on the PC for charging. Step 1: Start the APP which customized by customers or the web page for pairing process. Step 2: Use the supplied micro USB cable to recharge the battery while you are setting the doorbell camera first. Add the Wireless HD Doorbell Camera to your network. 1) Wireless HD Doorbell will detect the Wireless device (AP or router) The default Wireless settings are:
Mode: Infrastructure SSID: ANY Wireless Security: Disabled Domain: USA Channel No.: Auto which is Disable the Wireless Security automatically. 6 4) When you connect, the following screen will be displayed. 2) Press the Doorbell/WPS button of the camera for up to 15 seconds and on your Wireless device (AP or router) as well to establish a wireless connection automatically. The wireless connection is successful when the LED (Amber) is fast blinking. 3) Obtain the IP Address of Doorbell on Wireless device (AP or router) device page. And start the Internet Explorer. After then enter the IP Address of Doorbell on the Address box of Internet Explorer (ex. http://192.168.1.223) m Confidential Sercom 5) Click View Video. 6) The first time you connect to the camera, you will be prompted to install decoders. Choose "I accept the terms of the license agreement" and click "OK". Note: The options can only be configured while using IE browser. Other browsers can just view the video rather than configuration. 7 seconds while the video stream is buffered. 8) If the Administrator has restricted access to known users, you will 7) Video will start playing automatically. There may be a delay of a few The default log in Administration:
User Name: administrator Password: Blank then be prompted for a username and password. Enter the name and password assigned to you by the Doorbell administrator. m Confidential Sercom 9) Access the Administration for more Doorbell settings on DBC831 GUI. 8 Step 6: Remove the screws from legacy doorbell on the wall and disconnect the wires. Step 3: Switch to analog or digital chime according to your existing doorbell in the process. (The customers are required to develop this feature on the App) Step 4: Complete the pairing process and unplug the Micro USB cable from the Doorbell Camera. Step 5: Identify the location for mounting the Doorbell Camera. The recommended installation height of the Doorbell Camera is about 130~150cm from the ground. m Confidential Sercom Step 7: Use the two screws to secure the mounting bracket to the wall. Note: The provided gradienter can be used for measuring angles to prevent inclination. 9 Step 8: Connect the AC wires on the Doorbell Camera to the chime and transformer by using the provided splice connectors, as shown in the following diagram. Use the pliers to connect the wires by using the two splice connectors to ensure the wires are firmly attaching together. m Confidential Sercom Step 9: Turn the switch (on the back) on. 10 Step 10: Attach the Doorbell Camera to the mounting bracket and secure them with the anti-theft screw via the Allen key. Make sure the Doorbell Camera is firmly fixed and working properly. m Confidential Sercom Note: If the Doorbell Camera is being triggered too often, the battery capacity tends to decrease at low level and then the camera will just support ring-only mode. 11 A Network Protocols Wireless interface Model Dimensions Operating Temperature Video compression Image resolution Storage Temperature Appendix A Specifications Wireless HD Doorbell Camera Wireless HD Doorbell Camera 42mm (W) x 111.8mm (H) x 24.9mm (D)
-20 C to 50 C
(The battery won't be charged when temperature is <0C ) H.264 Main Profile and MJPEG 720p (1280*720),VGA (640*480), QVGA (320*240)
-20 C to 70 C TCP/IP, HTTP, HTTPS, DHCP, UPnP, NTP, RTP, RTCP, RTSP, DNS IEEE 802.11b/g/n; WEP 64/128 bit, WPA/WPA2 Personal, WPS 1 Doorbell/WPS button 1 Reset button 1 1 1 built-in Speaker 1 built-in Microphone AC 8V~24V External AC power wiring through spring connector 1 * Internal 730mAh Battery m Confidential Sercom FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not LED IR LED Speaker Microphone Power Regulatory Approvals Buttons 12 receiver is connected. occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. m Confidential Sercom CE Standards This product complies with the 99/5/EEC directives, including the following safety and EMC standards:
EN55022/24 CE Marking Warning This is a Class B product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. CE Approval 13
1 | Internal Photos | Internal Photos | 2.75 MiB |
Project No.: 1611139 Page 3 of 15 Project No.: 1611139 Page 4 of 15 Project No.: 1611139 Page 5 of 15 Project No.: 1611139 Page 6 of 15 Project No.: 1611139 Page 7 of 15 Project No.: 1611139 Page 8 of 15 Project No.: 1611139 Page 9 of 15 Project No.: 1611139 Page 10 of 15 Project No.: 1611139 Page 11 of 15 Project No.: 1611139 Page 12 of 15 Project No.: 1611139 Page 13 of 15 Project No.: 1611139 Page 14 of 15 Project No.: 1611139 Page 15 of 15
1 | Confidentiality | Cover Letter(s) | 35.61 KiB |
FCC, Request for non-disclosure Date: 10-Aug-09 RF_501, Issue 5 Page 1 of 1 Company Name: Sercomm Corporation Address: 8F, No. 3-1, YuanQu St, NanKang ein Taipei Country: Taiwan Telefication B Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC 1D: P27DBC831 Reference number: ##HHHH Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:
STC em re icurl| (|) Block Diagrams
., Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the mead regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1):
A (0 as Ce) Co) O10 = LAL] MT -oes aeons a ele) i] External Photos Justification:
Planned Release Date STC: (notes 2, 3, 4, 5) Date: 2017-06-22 . Name and signature of applicant: Nick Wu elie 1) A document or type of document can only have ONE type of confidentiality!
2) Short-Term, confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!
3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!
Pye oe Om Oem OR ee ease k Mis oe Ore ees OE eee Ree OL Le Re Le expiration of the STC period
1 | Declaration of authorization | Cover Letter(s) | 75.03 KiB |
RF_160, Issue 02 Declaration of Authorization Sercomm Corporation We Name:
Address: 8F, No. 3-1, YuanQu St, NanKang City:
Taipei Country: Taiwan Declare that:
Name Representative of agent: Ms. Cathy Wang Agent Company name: BTL Inc. Address: B1, No. 37, Lane 365, YangGuang St., NeiHu District 114 City: Taipei Country: Taiwan is authorized to apply for Certification and signing related documents of the following product(s), including 731 form(s):
Product description: Wireless HD Doorbell Camera,Doorbell HD Wi-Fi Camera Type designation: DBC831xxxxxxxx, VistaCam 1200xxxxx (the 1st x should be "blank" or "-"; the rest x could be 0 to 9, A to Z, "blank" or "-" , for marking purpose) Trademark: Sercomm ; Vera Control, Ltd. ; MiOS, Ltd. FCC ID: P27DBC831 on our behalf. Date:
City:
2017-06-22 Taipei Name:
Nick Wu Function: Engineer Signature:
Notes:
(1): Required for FCC application
(2): For FCC it must be the Grantee Code owner or the authorized agent.
1 | MPE | RF Exposure Info | 62.12 KiB |
FCC RF EXPOSURE REPORT FCC ID: P27DBC831 Project No. Equipment
: 1611139
: Wireless HD Doorbell Camera,Doorbell HD Wi-Fi Camera
: DBC831 Test Model Serial Model : DBC831xxxxxxxx, VistaCam 1200xxxxx (the 1st x should be blank or -; the rest x could be 0 to 9, A to Z, blank or - , for marking purpose)
: Sercomm Corporation
: 8F, No. 3-1, YuanQu St., NanKang, Taipei, Taiwan 115
: FCC Guidelines for Human Exposure IEEE C95.1 Applicant Address According:
Technical Manager
:
(Herbort Liu) B T L I N C . B1, No. 37, Lane 365, Yang-Guang St., Nei-Hu District, Taipei City 114, Taiwan. TEL: +886-2-2657-3299 FAX: +886-2-2657-3331 MPE CALCULATION METHOD:
Calculation Method of RF Safety Distance:
where:
S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Table for Filed Antenna Ant. 1 SERCOM Brand Model Name Antenna Type Connector Gain (dBi) DBC831 FPC IPEX 0.31 CACULATION:
Test Mode :
Frequency
(MHz) 2412 2437 2462 Test Mode :
Frequency
(MHz) 2412 2437 2462 Test Mode :
Frequency
(MHz) 2412 2437 2462 TX B Mode Total / CH01, CH06, CH11 Antenna Antenna Gain Gain
(dBi)
(numeric) 0.31 1.0740 0.31 1.0740 0.31 1.0740 Peak Output Power (dBm) Peak Output Power (mW) Power Density (S)
(mW/cm2) 0.01823687 Limit of Power Density (S)
(mW/cm2) 1 1 1 19.31 20.31 20.17 85.3100 107.3989 0.02295886 103.9920 0.02223056 TX G Mode Total / CH01, CH06, CH11 Antenna Gain
(dBi) 0.31 Antenna Gain
(numeric) 1.0740 0.31 0.31 1.0740 1.0740 Peak Output Power (dBm) Peak Output Power (mW) Power Density (S)
(mW/cm2) Limit of Power Density (S)
(mW/cm2) 25.75 26.42 24.34 375.8374 0.08034343 438.5307 0.09374549 271.6439 0.05806981 1 1 1 TX N-20M Mode Total / CH01, CH06, CH11 Peak Output Power (dBm) Peak Output Power (mW) Power Density (S)
(mW/cm2) Limit of Power Density (S)
(mW/cm2) 25.9 26.2 389.0451 0.08316687 416.8694 0.08911491 1.0740 24.02 252.3481 0.05394490 1 1 1 Antenna Gain
(numeric) 1.0740 1.0740 Antenna Gain
(dBi) 0.31 0.31 0.31 Test Result Complies Complies Complies Test Result Complies Complies Complies Test Result Complies Complies Complies
1 | Test Report | Test Report | 3.27 MiB |
FCC Radio Test Report FCC ID: P27DBC831 This report concerns (check one): Original Grant Class I Change Class II Change Project No. Equipment Test Model Series Model Applicant Address
: 1611139
: Wireless HD Doorbell Camera,Doorbell HD Wi-Fi Camera
: DBC831
: DBC831xxxxxxxx, VistaCam 1200xxxxx (the 1st x should be "blank" or "-"; the rest x could be 0 to 9, A to Z, "blank" or "-" , for marking purpose)
: Sercomm Corporation
: 8F, No. 3-1, YuanQu St., NanKang, Taipei, Taiwan 115 Date of Receipt Date of Test Issued Date Tested by
: Dec. 08, 2016
: Dec. 08, 2016 ~ Dec. 22, 2016
: Dec. 26, 2016
: BTL Inc. Testing Engineer Technical Manager Authorized Signatory
:
:
:
(Rush Kao)
(Jeff Yang)
(Andy Chiu) B T L I N C . B1, No.37, Lane 365, Yang Guang St., Nei-Hu District, Taipei City 114, Taiwan. TEL:+886-2-2657-3299 FAX: +886-2- 2657-3331 Report No.: BTL-FCCP-1-1611139 Page 1 of 112 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufactures responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. BTLs report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and BTL-self, extracts from the test report shall not be reproduced except in full with BTLs authorized written approval. and accredited by the conformity assessment authorities listed in this test report. BTLs laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Report No.: BTL-FCCP-1-1611139 Page 2 of 112 Table of Contents Page 4 . EMC EMISSION TEST 3 . GENERAL INFORMATION 1 . CERTIFICATION 2 . SUMMARY OF TEST RESULTS 4.1 CONDUCTED EMISSION MEASUREMENT 2.1 TEST FACILITY 2.2 MEASUREMENT UNCERTAINTY 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 4.1.2 TEST PROCEDURE 4.1.3 DEVIATION FROM TEST STANDARD 4.1.4 TEST SETUP 4.1.5 EUT OPERATING CONDITIONS 4.1.6 EUT TEST CONDITIONS 4.1.7 TEST RESULTS 6 7 8 8 10 3.1 GENERAL DESCRIPTION OF EUT 10 3.2 DESCRIPTION OF TEST MODES 11 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 12 3.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 13 13 3.5 DESCRIPTION OF SUPPORT UNITS 14 14 14 14 14 15 15 15 15 16 16 17 17 18 19 19 19 19 19 20 20 20 20 20 20 20 20 21 4.2.1 RADIATED EMISSION LIMITS 4.2.2 TEST PROCEDURE 4.2.3 DEVIATION FROM TEST STANDARD 4.2.4 TEST SETUP 4.2.5 EUT OPERATING CONDITIONS 4.2.6 EUT TEST CONDITIONS 4.2.7 TEST RESULTS (9KHZ TO 30MHZ) 4.2.8 TEST RESULTS (30MHZ TO 1000 MHZ) 4.2.9 TEST RESULTS (ABOVE 1000 MHZ) 5.1 APPLIED PROCEDURES 5.1.1 TEST PROCEDURE 5.1.2 DEVIATION FROM STANDARD 5.1.3 TEST SETUP 5.1.4 EUT OPERATION CONDITIONS 5.1.5 EUT TEST CONDITIONS 5.1.6 TEST RESULTS 4.2 RADIATED EMISSION MEASUREMENT 6 . MAXIMUM PEAK CONDUCTED OUTPUT POWER TEST 5 . BANDWIDTH TEST Report No.: BTL-FCCP-1-1611139 Page 3 of 112 Table of Contents Page 6.1 APPLIED PROCEDURES / LIMIT 6.1.1 TEST PROCEDURE 6.1.2 DEVIATION FROM STANDARD 6.1.3 TEST SETUP 6.1.4 EUT OPERATION CONDITIONS 6.1.5 EUT TEST CONDITIONS 6.1.6 TEST RESULTS 7 . ANTENNA CONDUCTED SPURIOUS EMISSION 7.1 APPLIED PROCEDURES / LIMIT 7.1.1 TEST PROCEDURE 7.1.2 DEVIATION FROM STANDARD 7.1.3 TEST SETUP 7.1.4 EUT OPERATION CONDITIONS 7.1.5 EUT TEST CONDITIONS 7.1.6 TEST RESULTS 8 . POWER SPECTRAL DENSITY TEST 8.1 APPLIED PROCEDURES / LIMIT 8.1.1 TEST PROCEDURE 8.1.2 DEVIATION FROM STANDARD 8.1.3 TEST SETUP 8.1.4 EUT OPERATION CONDITIONS 8.1.5 EUT TEST CONDITIONS 8.1.6 TEST RESULTS 9 . MEASUREMENT INSTRUMENTS LIST 10 . EUT TEST PHOTO ATTACHMENT A - CONDUCTED EMISSION ATTACHMENT B - RADIATED EMISSION (9KHZ TO 30MHZ) ATTACHMENT C - RADIATED EMISSION (30MHZ TO 1000MHZ) ATTACHMENT D - RADIATED EMISSION (ABOVE 1000MHZ) ATTACHMENT E - BANDWIDTH ATTACHMENT F MAXIMUM PEAK CONDUCTED OUTPUT POWER ATTACHMENT G - ANTENNA CONDUCTED SPURIOUS EMISSION ATTACHMENT H - POWER SPECTRAL DENSITY 21 21 21 21 21 21 21 22 22 22 22 22 22 22 22 23 23 23 23 23 23 23 23 24 26 30 33 38 41 78 85 87 106 Report No.: BTL-FCCP-1-1611139 Page 4 of 112 REPORT ISSUED HISTORY Issued No. BTL-FCCP-1-1611139 Description Original Issue. Issued Date Dec. 26, 2016 Report No.: BTL-FCCP-1-1611139 Page 5 of 112
: DBC831
: Wireless HD Doorbell Camera,Doorbell HD Wi-Fi Camera
: Sercomm Corporation
: Dec. 08, 2016 ~ Dec. 22, 2016 rest x could be 0 to 9, A to Z, "blank" or "-" , for marking purpose) 1. CERTIFICATION Equipment Brand Name : Sercomm ; Vera Control, Ltd. ; MiOS, Ltd. Test Model Series Model DBC831xxxxxxxx, VistaCam 1200xxxxx (the 1st x should be "blank" or "-"; the Applicant Date of Test Test Sample : Engineering Sample Standard(s) The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. BTL-FCCP-1-1611139) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of TAF according to the ISO-17025 quality assessment standard and technical standard(s).
: FCC Part15, Subpart C:(15.247) / ANSI C63.10-2013 Report No.: BTL-FCCP-1-1611139 Page 6 of 112 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s):
Applied Standard(s): FCC Part15 (15.247) , Subpart C Standard(s) Section Test Item Judgment Remark 15.207 15.247(d) 15.247(a)(2) 15.247(b)(3) 15.247(e) 15.203 15.247(d)/
15.205/
15.209 Conducted Emission Antenna conducted Spurious Emission 6dB Bandwidth Peak Output Power Power Spectral Density Antenna Requirement Transmitter Radiated Emissions PASS PASS PASS PASS PASS PASS PASS NOTE:
(1) N/A denotes test is not applicable in this test report. Report No.: BTL-FCCP-1-1611139 Page 7 of 112 2.1 TEST FACILITY The test facilities used to collect the test data in this report:
Conducted emission Test:
C05: (VCCI RN: C-4742; FCC RN:965108; FCC DN:TW1082) No. 68-1, Ln. 169, Sec.2, Datong Rd., Xizhi Dist., New Taipei City 221, Taiwan Radiated emission Test (Below 1 GHz):
CB15: (FCC RN:674415; FCC DN:TW0659) Radiated emission Test (Above 1 GHz):
CB15: (FCC RN:674415; FCC DN:TW0659) No. 68-1, Ln. 169, Sec.2, Datong Rd., Xizhi Dist., New Taipei City 221, Taiwan No. 68-1, Ln. 169, Sec.2, Datong Rd., Xizhi Dist., New Taipei City 221, Taiwan 2.2 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2. The BTL measurement uncertainty is less than the CISPR 16-4-2 Ucispr requirement. The reported uncertainty of measurement y U, where expanded uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. A. Conducted emission test:
Test Site Method Measurement Frequency Range C05 CISPR 150 kHz ~ 30MHz B. Radiated emission test:
Test Site Method Measurement Frequency Range CB15
(3m) CISPR 9kHz ~ 150kHz 150kHz ~ 30MHz U,(dB) 3.06 U,(dB) 2.96 2.74 Test Site Method Measurement Frequency Range Ant. U,(dB) 4.76 4.28 5.08 4.50 200MHz ~ 1,000MHz 200MHz ~ 1,000MHz 30MHz ~ 200MHz 30MHz ~ 200MHz CB15
(3m) V H V H CISPR Test Site Method Measurement Frequency Range Ant. U,(dB) 4.48 4.50 4.30 4.14 1GHz ~ 6GHz 1GHz ~ 6GHz 6GHz ~ 18GHz 6GHz ~ 18GHz CB15
(3m) V H V H CISPR Test Site Method Measurement Frequency Range CB15
(1m) CISPR 18 ~ 26.5 GHz 26.5 ~ 40 GHz U,(dB) 4.72 5.20 Report No.: BTL-FCCP-1-1611139 Page 8 of 112 Our calculated Measurement Instrumentation Uncertainty is shown in the tables above. These are our Ulab values in CISPR 16-4-2 terminology. Since Table 1 of CISPR 16-4-2 has values of measurement instrumentation uncertainty, called UCISPR, as follows:
Conducted Disturbance (mains port) 150 kHz 30 MHz: 3.6 dB Radiated Disturbance (electric field strength on an open area test site or alternative test site) 30 MHz 1000 MHz: 5.2 dB It can be seen that our Ulab values are smaller than UCISPR. Note: unless specifically mentioned, the uncertainty of measurement has not been taken into account to declare the compliance or non-compliance to the specification. Report No.: BTL-FCCP-1-1611139 Page 9 of 112 3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT Equipment Brand Name Test Model Series Model Model Difference Wireless HD Doorbell Camera,Doorbell HD Wi-Fi Camera Sercomm ; Vera Control, Ltd. ; MiOS, Ltd. DBC831 DBC831xxxxxxxx, VistaCam 1200xxxxx (the 1st x should be
"blank" or "-"; the rest x could be 0 to 9, A to Z, "blank" or "-" , for marking purpose) The market distribution is different only. Operation Frequency Modulation Technology Product Description Bit Rate of Transmitter Output Power (Max.) 2412~2462 MHz 802.11b:DSSS 802.11g:OFDM 802.11n:OFDM 802.11b: 11/5.5/2/1 Mbps 802.11g:
54/48/36/24/18/12/9/6 Mbps 802.11n up to150 Mbps 802.11b: 20.31dBm 802.11g: 26.42dBm 802.11n(20MHz): 26.20dBm Power Source Power Rating Supplied from AC source or host system or battery. I/P: AC8~24V Battery: DC 3.7V, 730mAn Note:
1. For a more detailed features description, please refer to the manufacturers specifications or the user's manual. 2. Channel List:
CH01 CH11 for 802.11b, 802.11g, 802.11n(20MHz) Channel 01 02 03 Frequency
(MHz) 2412 2417 2422 Channel 04 05 06 Frequency
(MHz) 2427 2432 2437 Channel 07 08 09 Frequency
(MHz) 2442 2447 2452 Channel 10 11 Frequency
(MHz) 2457 2462 3. Table for Filed Antenna Ant. Brand Model Name 1 SERCOM DBC831 Antenna Type FPC Connector IPEX Gain
(dBi) 0.31 Note NA Report No.: BTL-FCCP-1-1611139 Page 10 of 112 3.2 DESCRIPTION OF TEST MODES To investigate the maximum EMI emission characteristics generates from EUT, the test system was pre-scanning tested base on the consideration of following EUT operation mode or test configuration mode which possible have effect on EMI emission level. Each of these EUT operation mode(s) or test configuration mode(s) mentioned above was evaluated respectively. Pretest Mode Description Mode 1 Mode 2 Mode 3 Mode 4 TX B MODE CHANNEL 01/06/11 TX G MODE CHANNEL 01/06/11 TX N-20MHZ MODE CHANNEL 01/06/11 Normal Link The EUT system operated these modes were found to be the worst case during the pre-scanning test as following:
Final Test Mode Mode 4 For Conducted Test Description Normal Link For Radiated Test Final Test Mode Description Mode 1 Mode 2 Mode 3 TX B MODE CHANNEL 01/06/11 TX G MODE CHANNEL 01/06/11 TX N-20MHZ MODE CHANNEL 01/06/11 Note:
(1) The measurements are performed at the high, middle, low available channels.
(2) 802.11b mode: DBPSK (1Mbps) 802.11g mode: OFDM (6Mbps) 802.11n HT20 mode : BPSK (6.5Mbps) For radiated emission tests, the highest output powers were set for final test.
(3) For radiated below 1G test, the 802.11b is found to be the worst case and recorded.
(4) The EUT was programmed to be in continuously transmitting mode and the transmit duty cycle is not less than 98%. Report No.: BTL-FCCP-1-1611139 Page 11 of 112 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING During testing, channel & power controlling software provided by the customer was used to control the operating channel as well as the output power level. The RF output power selection is for the setting of RF output power expected by the customer and is going to be fixed on the firmware of the final end product power parameters of WLAN Test software version Frequency (MHz) 802.11b 802.11g 802.11n (20MHz) 2412 80 80 80 Tera Term 2437 80 80 80 2462 80 72 72 Report No.: BTL-FCCP-1-1611139 Page 12 of 112 3.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 3.5 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. Item Equipment Mfr/Brand Model/Type No. A Notebook PC Acer Z8C FCC ID DOC -
Series No. N/A Item Shielded Type Ferrite Core 1 2 NO NO NO NO Length 0.8m 1.5m Note USB Cable Power Cable Report No.: BTL-FCCP-1-1611139 Page 13 of 112 4. EMC EMISSION TEST 4.1 CONDUCTED EMISSION MEASUREMENT 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS (Frequency Range 150KHz-30MHz) Frequency of Emission (MHz) 0.15 -0.50 0.50 -5.0 5.0 -30.0 Note:
Conducted Limit (dBV) Quasi-peak 66 to 56*
56 60 Average 56 to 46*
46 50
(1) The limit of " * " decreases with the logarithm of the frequency
(2) The test result calculated as following:
Measurement Value = Reading Level + Correct Factor Correct Factor = Insertion Loss + Cable Loss + Attenuator Factor(if use) Margin Level = Measurement Value - Limit Value The following table is the setting of the receiver Receiver Parameters Attenuation Start Frequency Stop Frequency IF Bandwidth Setting 10 dB 0.15 MHz 30 MHz 9 KHz 4.1.2 TEST PROCEDURE a. The EUT was placed 0.8 meters from the horizontal ground plane with EUT being connected to the power mains through a line impedance stabilization network (LISN). All other support equipments powered from additional LISN(s). The LISN provide 50 Ohm/ 50uH of coupling impedance for the measuring instrument. b. Interconnecting cables that hang closer than 40 cm to the ground plane shall be folded back c. I/O cables that are not connected to a peripheral shall be bundled in the center. The end of the and forth in the center forming a bundle 30 to 40 cm long. cable may be terminated, if required, using the correct terminating impedance. The overall length shall not exceed 1 m. d. LISN at least 80 cm from nearest part of EUT chassis. e. For the actual test configuration, please refer to the related Item EUT Test Photos. 4.1.3 DEVIATION FROM TEST STANDARD No deviation Report No.: BTL-FCCP-1-1611139 Page 14 of 112 4.1.4 TEST SETUP V e r t i c a l R e f e r e n c e G r o u n d P l a n e 4 0 c m E U T L I S N 8 0 c m T e s t R e c e i v e r N o t e : 1 . S u p p o r t u n i t s w e r e c o n n e c t e d t o s e c o n d L I S N . 2 . B o t h o f L I S N s ( A M N ) a r e 8 0 c m f r o m E U T a n d a t l e a s t 8 0 f r o m o t h e r u n i t s a n d o t h e r m e t a l p l a n e s H o r i z o n t a l R e f e r e n c e G r o u n d P l a n e 4.1.5 EUT OPERATING CONDITIONS The EUT was placed on the test table and programmed in normal function. 4.1.6 EUT TEST CONDITIONS Temperature: 25C Relative Humidity: 55% Test Voltage: AC 120V/60Hz 4.1.7 TEST RESULTS Please refer to the Attachment A. Report No.: BTL-FCCP-1-1611139 Page 15 of 112 4.2 RADIATED EMISSION MEASUREMENT 4.2.1 RADIATED EMISSION LIMITS In case the emission fall within the restricted band specified on 15.205(a), then the 15.209(a) limit in the table below has to be followed. LIMITS OF RADIATED EMISSION MEASUREMENT (9KHz-1000MHz) Frequency
(MHz) 0.009~0.490 0.490~1.705 1.705~30.0 30~88 88~216 216~960 960~1000 Field Strength
(microvolts/meter) 2400/F(KHz) 24000/F(KHz) 30 100 150 200 500 Measurement Distance
(meters) 300 30 30 3 3 3 3 LIMITS OF RADIATED EMISSION MEASUREMENT (Above 1000MHz) Frequency (MHz) Above 1000 Notes:
(dBuV/m) (at 3 meters) PEAK 74 AVERAGE 54
(1) The limit for radiated test was performed according to FCC PART 15C.
(2) The tighter limit applies at the band edges.
(3) Emission level (dBuV/m)=20log Emission level (uV/m).
(4) The test result calculated as following:
Measurement Value = Reading Level + Correct Factor Correct Factor = Antenna Factor + Cable Loss - Amplifier Gain(if use) Margin Level = Measurement Value - Limit Value Report No.: BTL-FCCP-1-1611139 Page 16 of 112 Spectrum Parameter Attenuation Start Frequency Stop Frequency RBW / VBW
(Emission in restricted band) Receiver Parameter Attenuation Start ~ Stop Frequency Start ~ Stop Frequency Start ~ Stop Frequency Start ~ Stop Frequency Start ~ Stop Frequency Setting Auto 1000 MHz 10th carrier harmonic 1MHz / 3MHz for Peak, 1MHz / 1/T for Average Setting Auto 9KHz~90KHz for PK/AVG detector 90KHz~110KHz for QP detector 110KHz~490KHz for PK/AVG detector 490KHz~30MHz for QP detector 30MHz~1000MHz for QP detector 4.2.2 TEST PROCEDURE a. The measuring distance of 3 m shall be used for measurements. The EUT was placed on the top of a rotating table 0.8 meter above the ground at a 3 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation.(below 1GHz) b. The measuring distance of 3 m shall be used for measurements. The EUT was placed on the top of a rotating table 1.5 meter above the ground at a 3 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation.(above 1GHz) c. The height of the equipment or of the substitution antenna shall be 0.8m or 1.5m; the height of the test antenna shall vary between 1 m to 4 m. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights find the maximum reading (used Bore sight function). e. The receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1GHz. f. The initial step in collecting radiated emission data is a receiver peak detector mode pre-scanning the measurement frequency range. Significant peaks are then marked and then Quasi Peak detector mode re-measured. g. All readings are Peak unless otherwise stated QP in column of Note. Peak denotes that the Peak reading compliance with the QP Limits and then QP Mode measurement didnt perform.
(below 1GHz) h. All readings are Peak Mode value unless otherwise stated AVG in column of Note. If the Peak Mode Measured value compliance with the Peak Limits and lower than AVG Limits, the EUT shall be deemed to meet both Peak & AVG Limits and then only Peak Mode was measured, but AVG Mode didnt perform. (above 1GHz) i. For the actual test configuration, please refer to the related Item EUT Test Photos. 4.2.3 DEVIATION FROM TEST STANDARD No deviation Report No.: BTL-FCCP-1-1611139 Page 17 of 112 4.2.4 TEST SETUP
(A) Radiated Emission Test Set-Up Frequency Below 1 GHz
(B) Radiated Emission Test Set-Up Frequency Above 1 GHz Report No.: BTL-FCCP-1-1611139 Page 18 of 112
(C) For Radiated Emissions Below 30MHz 4.2.5 EUT OPERATING CONDITIONS The EUT was programmed to be in continuously transmitting mode. 4.2.6 EUT TEST CONDITIONS Temperature: 25C Relative Humidity: 55% Test Voltage: AC 120V/60Hz 4.2.7 TEST RESULTS (9KHZ TO 30MHZ) Please refer to the Attachment B Remark:
(1) The amplitude of spurious emissions which are attenuated by more than 20 dB below the permissible value has no need to be reported.
(2) Distance extrapolation factor = 40 log (specific distance / test distance) (dB).
(3) Limit line = specific limits (dBuV) + distance extrapolation factor. 4.2.8 TEST RESULTS (30MHZ TO 1000 MHZ) Please refer to the Attachment C. 4.2.9 TEST RESULTS (ABOVE 1000 MHZ) Please refer to the Attachment D. Remark:
(1) No limit: This is fundamental signal, the judgment is not applicable. For fundamental signal judgment was referred to Peak output test. Report No.: BTL-FCCP-1-1611139 Page 19 of 112 5. BANDWIDTH TEST 5.1 APPLIED PROCEDURES FCC Part15 (15.247) , Subpart C Section 15.247(a)(2) Test Item Bandwidth Frequency Range
(MHz) 2400-2483.5 Result PASS 5.1.1 TEST PROCEDURE a. The EUT was directly connected to the spectrum analyzer and antenna output port as show in b. Spectrum Setting: RBW= 100KHz, VBW=300KHz, Sweep time = 2.5 ms. the block diagram below, 5.1.2 DEVIATION FROM STANDARD No deviation. 5.1.3 TEST SETUP 5.1.4 EUT OPERATION CONDITIONS The EUT was programmed to be in continuously transmitting mode. 5.1.5 EUT TEST CONDITIONS Temperature: 25C Relative Humidity: 55% Test Voltage: AC 120V/60Hz 5.1.6 TEST RESULTS Please refer to the Attachment E. Report No.: BTL-FCCP-1-1611139 Page 20 of 112 6. MAXIMUM PEAK CONDUCTED OUTPUT POWER TEST 6.1 APPLIED PROCEDURES / LIMIT FCC Part15 (15.247) , Subpart C Section Test Item Limit Frequency Range
(MHz) Result 15.247(b)(3) Maximum Output Power 6.1.1 TEST PROCEDURE 1 Watt or 30dBm 2400-2483.5 PASS a. The EUT was directly connected to the power meter and antenna output port as show in the block diagram below, b. The maximum peak conducted output power was performed in accordance with method 9.1.2 of FCC KDB 558074 D01 DTS Meas Guidance. 6.1.2 DEVIATION FROM STANDARD No deviation. 6.1.3 TEST SETUP 6.1.4 EUT OPERATION CONDITIONS The EUT was programmed to be in continuously transmitting mode. 6.1.5 EUT TEST CONDITIONS Temperature: 25C Relative Humidity: 55% Test Voltage: AC 120V/60Hz 6.1.6 TEST RESULTS Please refer to the Attachment F. Report No.: BTL-FCCP-1-1611139 Page 21 of 112 7. ANTENNA CONDUCTED SPURIOUS EMISSION 7.1 APPLIED PROCEDURES / LIMIT In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated device is operating, the RF power that is produced shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided that the transmitter demonstrates compliance with the peak conducted power limits. 7.1.1 TEST PROCEDURE the block diagram below, a. The EUT was directly connected to the spectrum analyzer and antenna output port as show in b. Spectrum Setting: RBW= 100KHz, VBW=300KHz, Sweep time = Auto. c. Offset=antenna gain+cable loss 7.1.2 DEVIATION FROM STANDARD No deviation. 7.1.3 TEST SETUP 7.1.4 EUT OPERATION CONDITIONS The EUT was programmed to be in continuously transmitting mode. 7.1.5 EUT TEST CONDITIONS Temperature: 25C Relative Humidity: 55% Test Voltage: AC 120V/60Hz 7.1.6 TEST RESULTS Please refer to the Attachment G. Report No.: BTL-FCCP-1-1611139 Page 22 of 112 8. POWER SPECTRAL DENSITY TEST 8.1 APPLIED PROCEDURES / LIMIT FCC Part15 (15.247) , Subpart C Section Test Item Limit 15.247(e) Power Spectral Density 8 dBm
(in any 3KHz) Frequency Range
(MHz) Result 2400-2483.5 PASS 8.1.1 TEST PROCEDURE a. The EUT was directly connected to the spectrum analyzer and antenna output port as show in b. Spectrum Setting: RBW=3KHz, VBW=10KHz, Sweep time = Auto. the block diagram below, 8.1.2 DEVIATION FROM STANDARD No deviation. 8.1.3 TEST SETUP 8.1.4 EUT OPERATION CONDITIONS The EUT was programmed to be in continuously transmitting mode. 8.1.5 EUT TEST CONDITIONS Temperature: 25C Relative Humidity: 55% Test Voltage: AC 120V/60Hz 8.1.6 TEST RESULTS Please refer to the Attachment H. Report No.: BTL-FCCP-1-1611139 Page 23 of 112 9. MEASUREMENT INSTRUMENTS LIST Calibrated until Jan. 26, 2017 Jun. 15, 2017 Dec. 10, 2017 N/A Calibrated until Jan. 07, 2017 Feb. 23, 2017 Item Kind of Equipment 1 TWO-LINE V-NETWORK Test Cable 2 3 EMI Test Receiver 4 Measurement Software Conducted Emission Measurement Manufacturer Type No. Serial No. R&S TIMES R&S EZ ENV216 CFD300-NL ESR7 EZ_EMC
(Version NB-03A) 101050 C02 101433 N/A Radiated Emission Measurement Item Kind of Equipment Manufacturer Type No. Serial No. MY5542012 MY5222099 7 0 1 2 EMI Receiver EXA Spectrum Analyzer Horn Keysight Keysight N9038A N9010A 3 Antenna(1G~18G) SCHWARZBECK Trilog-Broadband Schwarzbeck 4 Antenna(30M~1G) 5 Pre-Amplifier(30M~
6 Pre-Amplifier(1G~2 EMCI EMCI 1G) 6G) 7 8 9 10 Test Cable Test Cable Test Cable EXA Spectrum Analyzer 11 EMI Test Receiver 12 Loop Antenna EMCI EMCI EMCI Agilent Agilent EMCO BBHA 9120 D 9120D-1342 Mar. 01, 2017 VULB9168 9168-548 Jan. 17, 2017 EMC02325 980217 Dec. 29, 2016 012645B 980267 Mar. 01, 2017 EMC104-SM-S M-800 EEMC104-SM-S M-3000 S104-SMAP-2 N9010A N9038A 150207 Jan. 05, 2017 151205 Jan. 05, 2017 M001220 MY5222099 MY5121021 0 5 Jan. 05, 2017 Feb. 24, 2017 Jan. 08, 2017 6502 00042960 Nov. 24. 2017 Report No.: BTL-FCCP-1-1611139 Page 24 of 112 Item Kind of Equipment 1 Spectrum Analyzer Manufacturer R&S Type No. FSP-40 Serial No. 100129 Calibrated until Jan. 18, 2017 6dB Bandwidth Measurement Item Kind of Equipment 1 Spectrum Analyzer R&S Type No. FSP-40 Serial No. 100129 Calibrated until Jan. 18, 2017 Peak Output Power Measurement Manufacturer Antenna Conducted Spurious Emission Measurement Item Kind of Equipment 1 Spectrum Analyzer Manufacturer R&S Type No. FSP-40 Serial No. 100129 Calibrated until Jan. 18, 2017 Item Kind of Equipment 1 Spectrum Analyzer R&S Type No. FSP-40 Serial No. 100129 Calibrated until Jan. 18, 2017 Power Spectral Density Measurement Manufacturer Remark: N/A denotes no model name, serial no. or calibration specified. All calibration period of equipment list is one year. Report No.: BTL-FCCP-1-1611139 Page 25 of 112 ATTACHMENT A - CONDUCTED EMISSION Report No.: BTL-FCCP-1-1611139 Page 30 of 112 Test Mode:
Normal Link Line Report No.: BTL-FCCP-1-1611139 Page 31 of 112 Test Mode:
Normal Link Neutral Report No.: BTL-FCCP-1-1611139 Page 32 of 112 ATTACHMENT B - RADIATED EMISSION (9KHZ TO 30MHZ) Report No.: BTL-FCCP-1-1611139 Page 33 of 112 Test Mode:
TX MODE Ant 0 Report No.: BTL-FCCP-1-1611139 Page 34 of 112 Test Mode:
TX MODE Ant 0 Report No.: BTL-FCCP-1-1611139 Page 35 of 112 Test Mode:
TX MODE Ant 90 Report No.: BTL-FCCP-1-1611139 Page 36 of 112 Test Mode:
TX MODE Ant 90 Report No.: BTL-FCCP-1-1611139 Page 37 of 112 ATTACHMENT C - RADIATED EMISSION (30MHZ TO 1000MHZ) Report No.: BTL-FCCP-1-1611139 Page 38 of 112 Test Mode:
TX MODE Vertical Report No.: BTL-FCCP-1-1611139 Page 39 of 112 Test Mode:
TX MODE Horizontal Report No.: BTL-FCCP-1-1611139 Page 40 of 112 ATTACHMENT D - RADIATED EMISSION (ABOVE 1000MHZ) Report No.: BTL-FCCP-1-1611139 Page 41 of 112 Orthogonal Axis : X Test Mode :
TX B MODE 2412MHz Vertical Report No.: BTL-FCCP-1-1611139 Page 42 of 112 Orthogonal Axis : X Test Mode :
TX B MODE 2412MHz Vertical Report No.: BTL-FCCP-1-1611139 Page 43 of 112 Orthogonal Axis : X Test Mode :
TX B MODE 2412MHz Horizontal Report No.: BTL-FCCP-1-1611139 Page 44 of 112 Orthogonal Axis : X Test Mode :
TX B MODE 2412MHz Horizontal Report No.: BTL-FCCP-1-1611139 Page 45 of 112 Orthogonal Axis : X Test Mode :
TX B MODE 2437MHz Vertical Report No.: BTL-FCCP-1-1611139 Page 46 of 112 Orthogonal Axis : X Test Mode :
TX B MODE 2437MHz Vertical Report No.: BTL-FCCP-1-1611139 Page 47 of 112 Orthogonal Axis : X Test Mode :
TX B MODE 2437MHz Horizontal Report No.: BTL-FCCP-1-1611139 Page 48 of 112 Orthogonal Axis : X Test Mode :
TX B MODE 2437MHz Horizontal Report No.: BTL-FCCP-1-1611139 Page 49 of 112 Orthogonal Axis : X Test Mode :
TX B MODE 2462MHz Vertical Report No.: BTL-FCCP-1-1611139 Page 50 of 112 Orthogonal Axis : X Test Mode :
TX B MODE 2462MHz Vertical Report No.: BTL-FCCP-1-1611139 Page 51 of 112 Orthogonal Axis : X Test Mode :
TX B MODE 2462MHz Horizontal Report No.: BTL-FCCP-1-1611139 Page 52 of 112 Orthogonal Axis : X Test Mode :
TX B MODE 2462MHz Horizontal Report No.: BTL-FCCP-1-1611139 Page 53 of 112 Orthogonal Axis : X Test Mode :
TX G MODE 2412MHz Vertical Report No.: BTL-FCCP-1-1611139 Page 54 of 112 Orthogonal Axis : X Test Mode :
TX G MODE 2412MHz Vertical Report No.: BTL-FCCP-1-1611139 Page 55 of 112 Orthogonal Axis : X Test Mode :
TX G MODE 2412MHz Horizontal Report No.: BTL-FCCP-1-1611139 Page 56 of 112 Orthogonal Axis : X Test Mode :
TX G MODE 2412MHz Horizontal Report No.: BTL-FCCP-1-1611139 Page 57 of 112 Orthogonal Axis : X Test Mode :
TX G MODE 2437MHz Vertical Report No.: BTL-FCCP-1-1611139 Page 58 of 112 Orthogonal Axis : X Test Mode :
TX G MODE 2437MHz Vertical Report No.: BTL-FCCP-1-1611139 Page 59 of 112 Orthogonal Axis : X Test Mode :
TX G MODE 2437MHz Horizontal Report No.: BTL-FCCP-1-1611139 Page 60 of 112 Orthogonal Axis : X Test Mode :
TX G MODE 2437MHz Horizontal Report No.: BTL-FCCP-1-1611139 Page 61 of 112 Orthogonal Axis : X Test Mode :
TX G MODE 2462MHz Vertical Report No.: BTL-FCCP-1-1611139 Page 62 of 112 Orthogonal Axis : X Test Mode :
TX G MODE 2462MHz Vertical Report No.: BTL-FCCP-1-1611139 Page 63 of 112 Orthogonal Axis : X Test Mode :
TX G MODE 2462MHz Horizontal Report No.: BTL-FCCP-1-1611139 Page 64 of 112 Orthogonal Axis : X Test Mode :
TX G MODE 2462MHz Horizontal Report No.: BTL-FCCP-1-1611139 Page 65 of 112 Orthogonal Axis : X Test Mode :
TX N-20M MODE 2412MHz Vertical Report No.: BTL-FCCP-1-1611139 Page 66 of 112 Orthogonal Axis : X Test Mode :
TX N-20M MODE 2412MHz Vertical Report No.: BTL-FCCP-1-1611139 Page 67 of 112 Orthogonal Axis : X Test Mode :
TX N-20M MODE 2412MHz Horizontal Report No.: BTL-FCCP-1-1611139 Page 68 of 112 Orthogonal Axis : X Test Mode :
TX N-20M MODE 2412MHz Horizontal Report No.: BTL-FCCP-1-1611139 Page 69 of 112 Orthogonal Axis : X Test Mode :
TX N-20M MODE 2437MHz Vertical Report No.: BTL-FCCP-1-1611139 Page 70 of 112 Orthogonal Axis : X Test Mode :
TX N-20M MODE 2437MHz Vertical Report No.: BTL-FCCP-1-1611139 Page 71 of 112 Orthogonal Axis : X Test Mode :
TX N-20M MODE 2437MHz Horizontal Report No.: BTL-FCCP-1-1611139 Page 72 of 112 Orthogonal Axis : X Test Mode :
TX N-20M MODE 2437MHz Horizontal Report No.: BTL-FCCP-1-1611139 Page 73 of 112 Orthogonal Axis : X Test Mode :
TX N-20M MODE 2462MHz Vertical Report No.: BTL-FCCP-1-1611139 Page 74 of 112 Orthogonal Axis : X Test Mode :
TX N-20M MODE 2462MHz Vertical Report No.: BTL-FCCP-1-1611139 Page 75 of 112 Orthogonal Axis : X Test Mode :
TX N-20M MODE 2462MHz Horizontal Report No.: BTL-FCCP-1-1611139 Page 76 of 112 Orthogonal Axis : X Test Mode :
TX N-20M MODE 2462MHz Horizontal Report No.: BTL-FCCP-1-1611139 Page 77 of 112 ATTACHMENT E - BANDWIDTH Report No.: BTL-FCCP-1-1611139 Page 78 of 112 Test Mode : TX B Mode_CH01/06/11 Frequency
(MHz) 2412 2437 2462 6dB Bandwidth 99% Occupied BW
(MHz) 8.58 9.11 8.55
(MHz) 14.04 13.96 13.64 TX CH01 Min. Limit
(kHz) 500 500 500 Test Result Complies Complies Complies Report No.: BTL-FCCP-1-1611139 Page 79 of 112 TX CH06 TX CH11 Report No.: BTL-FCCP-1-1611139 Page 80 of 112 Test Mode: TX G Mode_CH01/06/11 Frequency
(MHz) 2412 2437 2462 6dB Bandwidth 99% Occupied BW
(MHz) 15.35 15.40 15.10
(MHz) 16.32 16.28 16.20 TX CH01 Min. Limit
(kHz) 500 500 500 Test Result Complies Complies Complies Report No.: BTL-FCCP-1-1611139 Page 81 of 112 TX CH06 TX CH11 Report No.: BTL-FCCP-1-1611139 Page 82 of 112 Test Mode : TX N-20MHz Mode_CH01/06/11 Frequency
(MHz) 2412 2437 2462 6dB Bandwidth 99% Occupied BW
(MHz) 15.14 15.14 15.14
(MHz) 17.52 17.44 17.28 TX CH01 Min. Limit
(kHz) 500 500 500 Test Result Complies Complies Complies Report No.: BTL-FCCP-1-1611139 Page 83 of 112 TX CH06 TX CH11 Report No.: BTL-FCCP-1-1611139 Page 84 of 112 ATTACHMENT F MAXIMUM PEAK CONDUCTED OUTPUT POWER Report No.: BTL-FCCP-1-1611139 Page 85 of 112 Frequency
(MHz) 2412 2437 2462 Frequency
(MHz) 2412 2437 2462 Frequency
(MHz) 2412 2437 2462 Test Mode :TX B Mode_CH01/06/11 Conducted Power (dBm) Conducted Power (W) 19.31 20.31 20.17 0.09 0.11 0.10 Max. Limit Max. Limit
(dBm) 30.00 30.00 30.00
(W) 1.00 1.00 1.00 Test Mode :TX G Mode_CH01/06/11 Conducted Power (dBm) Conducted Power (W) 25.75 26.42 24.34 0.38 0.44 0.27 Max. Limit Max. Limit
(dBm) 30.00 30.00 30.00
(W) 1.00 1.00 1.00 Test Mode :TX N20 Mode_CH01/06/11 Conducted Power (dBm) Conducted Power (W) 25.90 26.20 24.02 0.39 0.42 0.25 Max. Limit Max. Limit
(dBm) 30.00 30.00 30.00
(W) 1.00 1.00 1.00 Result Complies Complies Complies Result Complies Complies Complies Result Complies Complies Complies Report No.: BTL-FCCP-1-1611139 Page 86 of 112 ATTACHMENT G - ANTENNA CONDUCTED SPURIOUS EMISSION Report No.: BTL-FCCP-1-1611139 Page 87 of 112 Test Mode : TX B Mode TX B mode CH01 TX B mode CH11 Report No.: BTL-FCCP-1-1611139 Page 88 of 112 TX B mode CH01 (10th Harmonic of the frequency) Report No.: BTL-FCCP-1-1611139 Page 89 of 112 TX B mode CH06 (10th Harmonic of the frequency) Report No.: BTL-FCCP-1-1611139 Page 90 of 112 Report No.: BTL-FCCP-1-1611139 Page 91 of 112 TX B mode CH11 (10th Harmonic of the frequency) Report No.: BTL-FCCP-1-1611139 Page 92 of 112 Report No.: BTL-FCCP-1-1611139 Page 93 of 112 Test Mode : TX G Mode TX G mode CH01 TX G mode CH11 Report No.: BTL-FCCP-1-1611139 Page 94 of 112 TX G mode CH01 (10th Harmonic of the frequency) Report No.: BTL-FCCP-1-1611139 Page 95 of 112 TX G mode CH06 (10th Harmonic of the frequency) Report No.: BTL-FCCP-1-1611139 Page 96 of 112 Report No.: BTL-FCCP-1-1611139 Page 97 of 112 TX G mode CH11 (10th Harmonic of the frequency) Report No.: BTL-FCCP-1-1611139 Page 98 of 112 Report No.: BTL-FCCP-1-1611139 Page 99 of 112 Test Mode : TX N-20M Mode TX HT20 mode CH01 TX HT20 mode CH11 Report No.: BTL-FCCP-1-1611139 Page 100 of 112 TX HT20 mode CH01 (10th Harmonic of the frequency) Report No.: BTL-FCCP-1-1611139 Page 101 of 112 TX HT20 mode CH06 (10th Harmonic of the frequency) Report No.: BTL-FCCP-1-1611139 Page 102 of 112 Report No.: BTL-FCCP-1-1611139 Page 103 of 112 TX HT20 mode CH11 (10th Harmonic of the frequency) Report No.: BTL-FCCP-1-1611139 Page 104 of 112 Report No.: BTL-FCCP-1-1611139 Page 105 of 112 ATTACHMENT H - POWER SPECTRAL DENSITY Report No.: BTL-FCCP-1-1611139 Page 106 of 112 Test Mode :TX B Mode_CH01/06/11 Frequency
(MHz) 2412 2437 2462 Power Density
(dBm/3kHz) Power Density
(mW/3kHz) Max. Limit
(dBm/3kHz)
-6.15
-6.13
-4.50 0.2427 0.2438 0.3548 TX CH01 8.00 8.00 8.00 Result Complies Complies Complies Report No.: BTL-FCCP-1-1611139 Page 107 of 112 TX CH06 TX CH11 Report No.: BTL-FCCP-1-1611139 Page 108 of 112 Test Mode :TX G Mode_CH01/06/11 Frequency
(MHz) 2412 2437 2462 Power Density
(dBm/3kHz) Power Density
(mW/3kHz) Max. Limit
(dBm/3kHz)
-8.93
-7.58
-8.78 0.1279 0.1746 0.1324 TX CH01 8.00 8.00 8.00 Result Complies Complies Complies Report No.: BTL-FCCP-1-1611139 Page 109 of 112 TX CH06 TX CH11 Report No.: BTL-FCCP-1-1611139 Page 110 of 112 Frequency
(MHz) 2412 2437 2462 Test Mode : TX N-20M Mode_CH01/06/11 Power Density
(dBm/3kHz) Power Density
(mW/3kHz) Max. Limit
(dBm/3kHz)
-8.34
-7.14
-8.29 0.1466 0.1932 0.1483 TX CH01 8.00 8.00 8.00 Result Complies Complies Complies Report No.: BTL-FCCP-1-1611139 Page 111 of 112 TX CH06 TX CH11 Report No.: BTL-FCCP-1-1611139 Page 112 of 112
1 | Test Setup Photos | Test Setup Photos | 412.45 KiB |
10. EUT TEST PHOTO Conducted Measurement Photos Report No.: BTL-FCCP-1-1611139 Page 26 of 112 Radiated Measurement Photos 9KHz to 30MHz Report No.: BTL-FCCP-1-1611139 Page 27 of 112 Radiated Measurement Photos 30MHz to 1000MHz Report No.: BTL-FCCP-1-1611139 Page 28 of 112 Radiated Measurement Photos Above 1000MHz Report No.: BTL-FCCP-1-1611139 Page 29 of 112
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2017-08-30 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2017-08-30
|
||||
1 | Applicant's complete, legal business name |
Sercomm Corporation
|
||||
1 | FCC Registration Number (FRN) |
0015548027
|
||||
1 | Physical Address |
8F, No. 3-1, YuanQu St, NanKang
|
||||
1 |
Taipei, N/A
|
|||||
1 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@telefication.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
P27
|
||||
1 | Equipment Product Code |
DBC831
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
N**** W******
|
||||
1 | Title |
Engineer
|
||||
1 | Telephone Number |
886-2******** Extension:
|
||||
1 | Fax Number |
886-2********
|
||||
1 |
N******@SERCOMM.COM
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
BTL Inc.
|
||||
1 | Name |
S******** L******
|
||||
1 | Physical Address |
B1, No. 37, Lane 365, YangGuang St.
|
||||
1 |
Taiwan
|
|||||
1 | Telephone Number |
886-2********
|
||||
1 | Fax Number |
886-2********
|
||||
1 |
s******@newbtl.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
BTL Inc.
|
||||
1 | Name |
K****** L****
|
||||
1 | Physical Address |
B1, No. 37, Lane 365, YangGuang St.
|
||||
1 |
Taiwan
|
|||||
1 | Telephone Number |
886-2********
|
||||
1 | Fax Number |
886-2********
|
||||
1 |
k******@newbtl.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless HD Doorbell Camera,Doorbell HD Wi-Fi Camera | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power output listed is conducted. The antenna(s) used for this transmitter must provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
BTL Inc.
|
||||
1 | Name |
I****** C********
|
||||
1 | Telephone Number |
+886-******** Extension:
|
||||
1 | Fax Number |
+886-********
|
||||
1 |
i******@newbtl.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.4400000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC