FCC ID: P27-XIONESCM2 XiOne-SC (B)

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/5366843.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Get started Wireless TV Box Voice Remote Power adapter HDMI cable 1 Before you begin, be sure your Wireless Gateway is powered on and activated and within range of your Streaming TV Box. If you have a Primary TV Box, be sure thats also powered on and activated. 2 Secure the HDMI cable between your TV and the Wireless TV Box. Turn on your TV and select the HDMI Input. 3 Plug the power adapter into an electrical outlet and connect the other end to the Power port on the Box. 4 Remove the tab from the back of the remote, aim it toward the Box and wait for onscreen instructions. The billing for your new Xfinity service(s) will begin within 5 days from the date your order for service(s) is placed. 2 AA batteries installedOnce the power indicator lights up, youre ready to go. Only use the supplied power adapter. Avoid outlets controlled by dimmers. You can also use an Ethernet cable (not included) to set up a wired connection instead. Please remove the protective clear film from your devices. 2 AA batteries installedPull tabHDMIHDMI on TVPower Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/CANADA Industry Canada statement:

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference

(2) This device must accept any interference, including interference that may cause undesired operation of the device Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Caution:

(i) the device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

Operations in the 5.25-5.35GHz band are restricted to indoor usage only. Avertissement:

(i) les dispositifs fonctionnant dans la bande de 5 150 5 250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

Les oprations dans la bande de 5.25-5.35GHz sont limits un usage intrieur seulement. Radiation Exposure Statement:

This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d'exposition aux radiations:

Cet quipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrl. Cet quipement doit tre install et utilis distance minimum de 20cm entre le radiateur et votre corps.

Date: June 6, 2022 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for confidentiality FCC ID: P27-XIONESCM2 To whom it may concern:

Short-term confidentiality Pursuant to DA 04-1705 of the Commissions pubic notice, in order to comply with the marketing regulations in 47CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after issue date. Internal Photographs External Photographs User's manual Test Set up photo Permanent confidentiality Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below:

Block Diagram Schematics Operational Description Bill of Materials Tune up procedure Part list The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter.

: Sercomm Corporation Applicant Address

: 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. Signature

Name and Job Title.

: Nick Wu, Engineer E-mail Tel.

: Nick_wu@sercomm.com

: +886-2-26553988

Date: 2022/6/6 Federal Communications Commission 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Product Certification Representative Authorization Letter FCC ID: P27-XIONESCM2 Product name: XiOne-SC (B) To whom it may concern:

We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization of model SCXIxxBEIxCo ; SCXIxxBEI (Where x may be any alphanumeric for External Body Color) to the FCC Rules and Regulations. International Certification Corp. Address

: No.3-1, Lane 6, Wen San 3rd St. Kwei Shan Dist., TaoYuan City 333, Taiwan (R.O.C.) Name

: Gary Chang Job Title

: Manager e-mail

: garychang@icertifi.com.tw Webs We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 862. This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Applicant Address

: Sercomm Corporation

: 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. Signature

Name and Job Title.

: Nick Wu, Engineer E-mail Tel.

: Nick_wu@sercomm.com

: +886-2-26553988

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/5471758.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Class II Permissive Change Request Letter Date:

2021/9/24 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 U.S.A. To whom it may concern, We, Sercomm Corporation would like to confirm that the product with FCC ID:

P27-XIONESCM2 (Grant date:08/03/2021) has further modification made on the replacing thermal shielding. This modification is only concerned with replacing thermal shielding.;

neither circuit design nor main function has been changed. Applicant Address

: Sercomm Corporation

: 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. Signature

Name and Job Title. E-mail Tel.

: Nick Wu, Engineer

: Nick_wu@sercomm.com

: +886-2-26553988

Date: June 19, 2021 Subject: Ad Hoc Mode Function Declaration FCC ID: P27-XIONESCM2 To Whom it may concern, We, Sercomm Corporation declare that the device does not support any non-US channels, country code selection and Channel 12 and 13 in 2.4 GHz band in all the operational mode(s). Also, the client software and associated drivers will not initiate any transmission on DFS frequencies without initiation by a master and the device without support DFS detection capability. This includes restriction on transmissions for beacons and support for ad-hoc peer-to-peer modes.

: Sercomm Corporation

: 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. Regards, Applicant Address Signature

Name and Job Title.

: Nick Wu, Engineer E-mail Tel. Nick_wu@sercomm.com

+886-2-26553988

Date : July 29, 2021

UNII Declaration Letter

We have declared below featured for FCC equipment authorization, Device FCC ID: P27-XIONESCM2 ; IC: 5604A-

XIONESC2

(1) DFS Device --

Client with Radar detection capability ,

Client without radar detection capability

(2) Active / Passive Scanning , Ad hoc mode access point capability

Frequency Band

(MHz)

5150 – 5250

5250 – 5350

5470 – 5725

5725 – 5850

Active Scanning

(the device can

transmit a probe

(beacon))

Yes ,

No

passive scanning

(where the device

is can listen only

with no probes)

No

Yes ,

Yes ,

Yes ,

Yes ,

No

No

No

Yes ,

Yes ,

Yes ,

No

No

No

Ad Hoc Mode

capability

Access point

capability

Yes ,

No

Yes ,

No

Yes ,

No

Yes ,

No

Yes ,

No

Yes ,

No

Yes ,

No

Yes ,

No

(3) Country code selection ability -

Yes ,

If no, pls explain how was implemented :

No

(4) Meet 15.202 requirement -

Yes ,

No ,

pls check below :

A client device is defined as a device operating in a mode in which the transmissions of the device are under

control of the master. A device in client mode is not able to initiate a network.

(5) For client devices that have software configuration control to operate in different modes (active scanning in

some and passive scanning in others) in different bands (devices with multiple equipment classes or those

that operate on non-DFS frequencies) or modular devices which configure the modes of operations through

software, the application must provide software and operations description on how the software and / or

hardware is implemented to ensure that proper operations modes can not be modified by end user or an

installer.

Apply ,

No Apply ,

(If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled)

You can suggest client to use below sentence if necessary:

On DFS channels, the WLAN driver on the device operates under the control of an AP at all times, except when in ad-hoc mode, on US

non-DFS channels. As described in the answer to question (2), the device passively scans DFS frequencies until a master device is

detected. The control of this functionality is not accessible to anyone under any conditions. Furthermore, the firmware is locked by

proprietary password and cannot be changed or modified by end user.

Applicant

Address

: Sercomm Corporation

: 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C.

Signature

:

Name and Job Title.

: Nick Wu, Engineer

Date: June 19, 2021

Federal Communications Commission

Authorization and Evaluation Division

7435 Oakland Mills Rd

Columbia MD 21046-1609

Subject: Request for confidentiality

FCC ID: P27-XIONESCM2

To whom it may concern:

Short-term confidentiality

Pursuant to DA 04-1705 of the Commission’s pubic notice, in order to comply with the marketing regulations in

47CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information

remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to

grant short-term confidentiality request on the following attachments until 180 days after issue date.

☒ Internal Photographs

☒ External Photographs

☒ User's manual

☒ Test Set up photo

Permanent confidentiality

Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential

treatment of information accompanying this Application As outlined below:

☒ Block Diagram

☒ Schematics

☒ Operational Description

☐ Bill of Materials

☐ Tune up procedure

The above materials contain trade secrets and proprietary information not customarily released to the public.

The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its

competitors.

The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all

accompanying documentation will not be made before the date of the Grant for this application.

Should you require any further information, please contact the undersigned.

Thank you for your consideration in this matter.

: Sercomm Corporation

Applicant

Address

: 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C.

Signature

:

Name and Job Title.

: Nick Wu, Engineer

E-mail

Tel.

: Nick_wu@sercomm.com

: +886-2-26553988