VUSION – Electronic Shelf Labels
Read all documents and system instructions carefully to minimize the risk of injuring
persons and to avoid damage to the system or damage to the environment.
Always keep all documents and guidance accessible.
If necessary, the content of this document will be updated. You can request the latest version
of the document via office.at@ses-imagotag.com.
Register at the https://portal.imagotag.com to get access to the latest software and
documentation.
An electronic shelf label is a device that shows article data and price information on
its display. In comparison to printed labels the information is automatically updated if price
or article data changes.
The SES-imagotag electronic shelf label family offers high-quality display options, operating
with a replaceable battery, thus working without any external power supply.
The SES-imagotag VUSION (2.4GHz) electronic shelf label family can change all pixels to
black, white or red/yellow. The current line-up has display sizes from 1.6 inch to 12.2 inch.
They may be used in landscape and portrait mode and can be configured in terms of radio,
theft protection, display protection and LED flash.
General Key Features
2.4 GHz proprietary radio protocol
Radio coverage: up to 25 meters
Bi-directional communication
11 available communication channels
Ultra-low power consumption
Customer-replaceable battery
Full graphical e-Ink display with paper-like readability
e-ink displays are available (Black/White, Black/White/Red, Black/White/Yellow)
Different configurations available (theft protection, display protection, LED flash)
Label versions for deep-freezing environments
Super wide viewing angle (nearly 180 degrees)
Flexible mounting options available
May be used in landscape and portrait mode
Fast response time
128-bit AES encryption with secure key exchange
Multiple pages support with preloading and fast page switching
Integrated Passive NFC tag
The installation instructions are intended for trained electricians who can exhibit the
following qualifications:
Knowledge of the use of tools and work instructions.
Knowledge of the usable conditions of the tool.
Knowledge of the electrical safety instructions.
Knowledge of the electrical building regulations.
Knowledge of the relevant standards.
Knowledge of the assembly schedule.
SES-imagotag GmbH I Kalsdorfer Straße 12 I A-8072 Fernitz-Mellach - AUSTRIA
CR: FN350927w I Commercial court: Graz I UID : ATU65936017
T. +43 (0) 5 94604-00 I E. office.at@ses-imagotag.com I www.ses-imagotag.com
The power supply are cell-button batteries. The following table will give you a short overview about all kinds of labels and their batteries.
Caption
Model
Display
Resolution
Active Display
Area
(mm)
Display
colors
Usable
pages
Battery
Type
Operati
ng
Voltage
Nominal
capacity
Wake
up
(seco
nds)
Battery
lifetime 5
years
with N
updates
per day
152x152
27.5 x 27.5
1xCR2450 3V
550 mAh
30
212x104
48.6 x 23.8
2xCR2450 3V
1100 mAh 15
VUSION 1.6
VUSION 2.2
VUSION 2.2 F
VUSION 2.6
VUSION 2.6 F
VUSION 2.7
VUSION 2.9
VUSION 2.9 F
VUSION 3.7
VUSION 4.2
VUSION 4.5
VUSION 5.9
VUSION 7.4
VUSION 9.7
VUSION 12.2
EDG2-0160-A
EDG3-0160-A
EDG2-0220-A
EDG3-0220-A
EDG3-0220-B
EDG2-0220-A
EDG2-0260-A
EDG3-0260-A
EDG2-0260-A
EDG2-0270-A
EDG2-0270-B
EDG3-0290-A
EDG3-0290-A
EDG2-0370-A
EDG2-0420-A
EDG2-0420-B
EDG2-0450-A
EDG2-0590-A
EDG3-0590-A
EDG2-0740-A
EDG2-0970-A
EDG3-0970-A
EDG2-1220-A
EDG3-1220-A
b/w/r
b/w/y
b/w/r
b/w/y
b/w
b/w/r
b/w/y
b/w
b/w/r
212x104
296x152
48.6 x 23.8
60.1 x 30.7
296x152
264x176
60.1 x 30.7
57.3 x 38.2
384 x 168
384 x 168
416x240
400x300
480x176
720x256
67,6 x 29,6
67,6 x 29,6
81.54 x 47.04
84.8 x 63.6
b/w/r
b/w
b/w/r
b/w/r
b/w/y
b/w/r
b/w/y
138.96 x 49.40 b/w/r
104.2 x 38.2
b/w/r
b/w/y
b/w/r
960x672
768x960
x
201.60
141.12
b/w/r
190.08 x 237.6
b/w/y
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
SES-imagotag GmbH I Kalsdorfer Straße 12 I A-8072 Fernitz-Mellach - AUSTRIA
CR: FN350927w I Commercial court: Graz I UID : ATU65936017
T. +43 (0) 5 94604-00 I E. office.at@ses-imagotag.com I www.ses-imagotag.com
2xCR2450 3V
2xCR2450 3V
1100 mAh 30
1100 mAh 15
2xCR2450 3V
2xCR2450 3V
1100 mAh 30
1100 mAh 15
2xCR2450 3V
2xCR2450 3V
3xCR2450 3V
3xCR2450 3V
1100 mAh 15
1100 mAh 15
1650 mAh 15
1650 mAh 15
3xCR2450 3V
1650 mAh 15
5xCR2450 3V
2750 mAh 15
8xCR2450 3V
4400 mAh 15
6xCR2450 3V
3300 mAh 15
1
2
1
2
1
2
2
1
2
2
2
2
2
2
1
480x800
97 x 161.6
4xCR2450 3V
2200 mAh 15
VUSION Sway
2.6
EDF3-0260-A
296 x 152
60.0 x 31.0
b/w/r
4
1×CR2450 3V
550 mAh
Up
to 3
years with
1 update
per day
Note: battery lifetime can vary depending on the operating conditions of the labels (temperature, radio usage etc…).
Page 3
General remarks
The SES-imagotag VUSION Labels must be installed according to the mounting instructions
of the producer. In rare cases it may occur that the usage of wireless appliances is restricted
by the building owner (e.g. Airport or Hospital). Please contact the appropriate authorities
before installing the SES-imagotag VUSION Labels.
Environmental
General
E-Paper displays are moisture and UV sensitive. The absolute rating operating environments
describes the boundary conditions for updating the display while the absolute rating storage
environment (see Storage and warehousing) describes the boundary conditions for a display
not updating.
Operating temperature
Operating temperature
for maximum lifetime
Operating humidity
BW
0° C to +45° C
BW (Wide temp/Freezer)
-25° C to +30° C
BWR
10° C to +40° C
21° C
30% - 80%
21° C
30% - 80%
21° C
35% - 70%
Cleaning Instructions
Clean the electronic label with the help of a damp cloth. Use only common household
cleaners.
Do not clean the label with alcohol, solvents and / or abrasive cleaning products.
Note: Do not use liquid or aerosol cleaners and keep it away from water.
Temperature and Humidity Conditions
High humidity combined with low temperature are not recommended.
Low temperature will reduce the battery lifetime.
Storage and warehousing
period at the absolute specified operating environment, the better the storage condition, the
better the E-Paper displays will perform. Like other moisture and UV sensitive components,
we recommend that our labels are stored in temperature and humidity-controlled
environments, and whenever possible, under below defined Optimal Storage Conditions,
away from sunlight, to optimize their performance.
It is strongly recommended to observe the following points to ensure the best operation,
functioning and battery lifetime:
Storage temperature and humidity
BW
-20° C to +50° C
30% - 80%
0° C to +30° C
BW (Wide temp/Freezer)
-20° C to +50° C
30% - 80%
0° C to +30° C
Storage temperature
Storage humidity
Optimal storage temperature
While displays are rated to perform according to specification for the warranty
BWR
-20° C to +50° C
40% - 70%
0° C to +30° C
Optimal storage humidity
(non-condensing)
40% - 60%
40% - 60%
40% - 60%
SES-imagotag GmbH I Kalsdorfer Straße 12 I A-8072 Fernitz-Mellach - AUSTRIA
CR: FN350927w I Commercial court: Graz I UID : ATU65936017
T. +43 (0) 5 94604-00 I E. office.at@ses-imagotag.com I www.ses-imagotag.com
• Do not operate any ESL Infrastructure (e.g. SES-imagotag AP-2010 or MAP
2014T/Lancom L-151E, ... ) in warehouse storing labels or where the radio coverage
will activate stored labels.
o The label will permanently try to connect to the access point, leading to less
usable battery lifetime.
• The maximum storage time of labels should not exceed 0.5-1 year
If these listed limits are not complied, the specified battery lifetime can vary, and display
quality can be influenced negatively.
Intended Use
The VUSION electronic shelf label family is exclusively designed to connect to Access Points
of the company SES-imagotag or acknowledged partners via radio.
The device may only be used in areas where the environmental fulfill the requirements
described in the chapter “Environmental”.
Improper use
The SES-imagotag is not responsible and does not assume liability for damage or injury to
persons, property, environment and the VUSION electronic shelf label family itself caused by
improper installation or improper handling.
The operator assumes liability for any damage that results from improper use.
The following usage is not allowed:
Don't drop VUSION Family Labels.
Keep VUSION Family Labels away from water.
Don’t use the VUSION Labels with defective parts.
Don’t use the VUSION Labels with spare parts and accessories which are not
examined and approved by SES-imagotag.
Unauthorized changes or modifications to the VUSION Labels and their
components without the consent of SES-imagotag are strictly forbidden.
The SES-imagotag VUSION Labels do not contain parts, except batteries, that
are allowed to be maintained by the user.
The SES-imagotag VUSION Labels must NOT be dismantled. For necessary
maintenance or repair works always contact the manufacturer.
Don't throw VUSION Labels into the dustbin. Deposit VUSION Labels at a
reprocessing company.
Contact SES-imagotag for more details about the removal process.
Please do not use any liquid or spray cleaners directly on the surface of the
SES-imagotag takes no responsibility for stolen VUSION Labels without
VUSION Labels.
encryption.
KEEP BATTERIES OUT OF REACH OF CHILDREN
Swallowing batteries may lead to serious injury in as little as 2 hours or death,
due to chemical burns and potential perforation of the esophagus.
If you suspect your child has swallowed or inserted a button battery
immediately call local Poisons Information Authority, with contact information
available online.
Page 5
Don't heat, recharge or bend the battery.
Examine devices and make sure the battery compartment is correctly secured,
e.g. that the screw or other mechanical fastener is tightened. Do not use if the
compartment is not secure.
Dispose used button batteries immediately and safely. Empty batteries can
Tell others about the risk associated with button batteries and how to keep
still cause harm.
their children safe.
To learn how to use battery door opener check out the video tutorial →
https://vimeo.com/173469013/01c9f17b10
Certificates
Hereby, SES-Imagotag GmbH declares that the radio equipment VUSION 1.6"
(EDG2-0160-A, EDG3-0160-A), VUSION 2.2" (EDG2-0220-A, EDG3-0220-A, EDG3-
0220-B), VUSION 2.2" F (EDG2-0220-A), VUSION 2.6" (EDG2-0260-A, EDG3-0260-
A), VUSION 2.6" F (EDG2-0260-A), VUSION 2.7" (EDG2-0270-A, EDG2-0270-B),
VUSION 2.9" (EDG3-0290-A), VUSION 2.9" F (EDG3-0290-A), VUSION 3.7" (EDG2-
0370-A), VUSION 4.2" (EDG2-0420-A, EDG2-0420-B), VUSION 4.5" (EDG2-0450-A),
VUSION 5.9" (EDG2-0590-A, EDG3-0590-A), VUSION 7.4" (EDG2-0740-A), VUSION
9.7" (EDG2-0970-A, EDG3-0970-A), VUSION 12.2" (EDG2-1220-A, EDG3-1220-A),
VUSION Sway 2.6 (EDF3-0260-A) is in compliance with Directive 2014/53/EU. The
full text of the EU Declaration of Conformity is available at the following internet
address:
https://www.ses-imagotag.com/wp-
content/uploads/2019/11/DoC_VUSION_V2.pdf
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CAUTION TO USERS
Changes or modifications not expressly approved by the party responsible for
compliance could void the user`s authority to operate the equipment.
FCC rules apply to the following products: VUSION 1.6" (EDG2-0160-A, EDG3-0160-
A), VUSION 2.2" (EDG2-0220-A, EDG3-0220-A, EDG3-0220-B), VUSION 2.2" F (EDG2-
0220-A), VUSION 2.6" (EDG2-0260-A, EDG3-0260-A), VUSION 2.6" F (EDG2-0260-
A), VUSION 2.7" (EDG2-0270-A, EDG2-0270-B), VUSION 2.9" (EDG3-0290-A),
VUSION 2.9" F (EDG3-0290-A), VUSION 3.7" (EDG2-0370-A), VUSION 4.2" (EDG2-
0420-A, EDG2-0420-B), VUSION 4.5" (EDG2-0450-A), VUSION 5.9" (EDG2-0590-A,
EDG3-0590-A), VUSION 7.4" (EDG2-0740-A), VUSION 9.7" (EDG2-0970-A, EDG3-
0970-A), VUSION 12.2" (EDG2-1220-A, EDG3-1220-A), VUSION Sway 2.6 (EDF3-
0260-A)
Page 6
This device contains licence-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil
estconforme aux CNR d’Innovation, Sciences et Développement économique
Canadaapplicables aux appareils radio exempts de licence. L’exploitation est
autoriséeaux deux conditions suivantes:
1) L’appareil ne doit pas produire de brouillage;
2) L’appareil doit accepter tout brouillage radioélectrique subi, même si
lebrouillage est susceptible d’en compromettre le fonctionnement.
IC standards apply to the following products: : VUSION 1.6" (EDG2-0160-A, EDG3-
0160-A), VUSION 2.2" (EDG2-0220-A, EDG3-0220-A, EDG3-0220-B), VUSION 2.2" F
(EDG2-0220-A), VUSION 2.6" (EDG2-0260-A, EDG3-0260-A), VUSION 2.6" F (EDG2-
0260-A), VUSION 2.7" (EDG2-0270-A, EDG2-0270-B), VUSION 2.9" (EDG3-0290-A),
VUSION 2.9" F (EDG3-0290-A), VUSION 3.7" (EDG2-0370-A), VUSION 4.2" (EDG2-
0420-A, EDG2-0420-B), VUSION 4.5" (EDG2-0450-A), VUSION 5.9" (EDG2-0590-A,
EDG3-0590-A), VUSION 7.4" (EDG2-0740-A), VUSION 9.7" (EDG2-0970-A, EDG3-
0970-A), VUSION 12.2" (EDG2-1220-A, EDG3-1220-A), VUSION Sway 2.6 (EDF3-
0260-A)
NCC rules apply to the following products: VUSION 1.6" (EDG2-0160-A), VUSION
2.2" (EDG2-0220-A, EDG3-0220-B), VUSION 2.2" F (EDG2-0220-A), VUSION 2.6"
(EDG2-0260-A, EDG3-0260-A), VUSION 2.6" F (EDG2-0260-A), VUSION 4.2"
(EDG2-0420-A), VUSION 4.2" (EDG2-0420-B), VUSION 4.5" (EDG2-0450-A),
VUSION 7.4" (EDG2-0740-A), VUSION 9.7" (EDG2-0970-A, EDG3-0970-A), VUSION
12.2" (EDG2-1220-A)
取得審驗證明之低功率射頻器材,非經核准,公司、商號或使用者均不得擅自變更
頻率、加大功率或變更原設計之特性及功能。低功率射頻器材之使用不得影響飛航
安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至無干擾時方得
繼續使用。前述合法通信,指依電信管理法規定作業之無線電通信。低功率射頻器
材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
Japan
This device is granted pursuant to the Japanese Radio Law under the grant ID n° :
201-180158 (Model: EDG2-0160-A)
201-180162 (Model: EDG2-0220-A)
219-210003 (Model: EDG3-0220-B)
201-180029 (Model: EDG2-0260-A)
219-210005 (Model: EDG3-0260-A)
201-180159 (Model: EDG2-0420-A)
Page 7
020-200028 (Model: EDG2-0420-B)
201-190006 (Model: EDG2-0450-A)
201-180160 (Model: EDG2-0740-A)
219-210006 (Model: EDG2-0970-A)
219-210009 (Model: EDG3-0970-A)
201-180711 (Model: EDG2-1220-A)
This device should not be modified (otherwise the granted designation number will
become invalid)
本製品は、電波法に基づく特定無線設備の技術基準適合証明などを受けており
ます。認証番号:
201-180158 (Model: EDG2-0160-A)
201-180162 (Model: EDG2-0220-A)
219-210003 (Model: EDG3-0220-B)
201-180029 (Model: EDG2-0260-A)
219-210005 (Model: EDG3-0260-A)
201-180159 (Model: EDG2-0420-A)
020-200028 (Model: EDG2-0420-B)
201-190006 (Model: EDG2-0450-A)
201-180160 (Model: EDG2-0740-A)
219-210006 (Model: EDG2-0970-A)
219-210009 (Model: EDG3-0970-A)
201-180711 (Model: EDG2-1220-A)
本製品の改造は禁止されています。(適合証明番号などが無効となります。)
Singapore
Page 8