FCC ID: 2ACQM-EDB1-0210-A VUSION 2.1

VUSION Bluetooth LE Product Manual VUSION Bluetooth LE Product Specification SES-IMAGOTAG SES-imagotag GmbH I Kalsdorfer Strae 12 I A-8072 Fernitz-Mellach - AUSTRIA CR: FN350927w I Commercial court: Graz I UID : ATU65936017 T. +43 (0) 5 94604-00 I E. office.at@ses-imagotag.com I www.ses-imagotag.com Read all documents and system instructions carefully to minimize the risk of injuring persons and to avoid damage to the system or damage to the environment. Always keep all documents and guidance accessible. If necessary, the content of this document will be updated. You can request the latest version of the document via pdm.hardware@ses-imagotag.com. About ESLs An electronic shelf label is a device that shows article data and price information on its display. In comparison to printed labels the information is automatically updated if price or article data changes. In this product specification the focus is set on the product family VUSION Bluetooth LE. With its new Bluetooth LE wireless signal range it is a new product range and the line-up has the display sizes 1.5, 1.6, 2.1, 2.2, 2.6, 4.2, 6.0, 7.4 and 9.7 General Key Features Bluetooth LE proprietary radio protocol Radio coverage: up to 25 meters Bi-directional communication Ultra-low power consumption Full graphical e-Ink display with paper-like readability Super wide viewing angle (nearly 180 degrees) Flexible mounting options available May be used in landscape and portrait mode Fast response time 128-bit AES encryption Multiple pages support with preloading and fast page switching Integrated Passive NFC tag The installation instructions are intended for trained electricians who can exhibit the following qualifications:

Knowledge of the use of tools and work instructions. Knowledge of the usable conditions of the tool. Knowledge of the electrical safety instructions. Knowledge of the electrical building regulations. Knowledge of the relevant standards. Knowledge of the assembly schedule. Page 2 VUSION Bluetooth LE Product Manual Overview about VUSION Engage labels Product name Model Resolution DPI Display colors Usable pages Battery Type IP rating VUSION 1.5 VUSION 1.6 VUSION 2.1 VUSION 2.1 WP VUSION 2.2 VUSION 2.6 VUSION 4.2 VUSION 4.2 WP VUSION 6.0 VUSION 7.4 VUSION 9.7 EDB1-0150-A EDB1-0160-A EDB1-0210-A EWB1-0210-A EDB1-0220-A EDB1-0220-B EDB1-0260-A EDB1-0420-A EWB1-0420-A EDB2-0600-B EDB1-0740-A EDB1-0970-A 200x200 152x152 248x128 248x128 186 b/w/r 140 b/w/r 135 b/w/r 135 b/w/r 212x104 111 b/w/r 296x152 400x300 400x300 600x448 480x800 672x960 125 b/w/r 120 b/w/r 120 b/w/r 132 b/w/r 126 b/w/r 121 b/w/r 2 2 2 2 2 2 2 2 2 2 2 Coin Cell (CR2450) Coin Cell (CR2450) Coin Cell (CR2450) Coin Cell (CR2450) Coin Cell (CR2450) Coin Cell (CR2450) Coin Cell (CR2450) Coin Cell (CR2450) Coin Cell (CR2450) Coin Cell (CR2450) Coin Cell (CR2450) IP53 IP53 IP53 IP68 IP53 IP53 IP53 IP68 IP53 IP53 IP53 SES-imagotag GmbH I Kalsdorfer Strae 12 I A-8072 Fernitz-Mellach - AUSTRIA CR: FN350927w I Commercial court: Graz I UID : ATU65936017 T. +43 (0) 5 94604-00 I E. office.at@ses-imagotag.com I www.ses-imagotag.com VUSION Bluetooth LE Product Manual General remarks The SES-imagotag VUSION Labels must be installed according to the mounting instructions of the producer. In rare cases it may occur that the usage of wireless appliances is restricted by the building owner (e.g. Airport or Hospital). Please contact the appropriate authorities before installing the SES-imagotag VUSION Labels. Environmental General E-Paper displays are moisture and UV sensitive. The absolute rating operating environments describes the boundary conditions for updating the display while the absolute rating storage environment (see Storage and warehousing) describes the boundary conditions for a display not updating. BWR R2.0 BW Operating temperature 0 C to +40 C

-25C - 10C Cleaning Instructions Clean the electronic label with the help of a damp cloth. Use only common household cleaners. Do not clean the label with alcohol, solvents and / or abrasive cleaning products. Note: Do not use liquid or aerosol cleaners and keep it away from water. Temperature and Humidity Conditions High humidity combined with low temperature are not recommended. Low temperature will reduce the battery lifetime. SES-imagotag GmbH I Kalsdorfer Strae 12 I A-8072 Fernitz-Mellach - AUSTRIA CR: FN350927w I Commercial court: Graz I UID : ATU65936017 T. +43 (0) 5 94604-00 I E. office.at@ses-imagotag.com I www.ses-imagotag.com Storage and warehousing While displays are rated to perform according to specification for the warranty period at the absolute specified operating environment, the better the storage condition, the better the E-

Paper displays will perform. Like other moisture and UV sensitive components, we recommend that our labels are stored in temperature and humidity-controlled environments, and whenever possible, under below defined Optimal Storage Conditions, away from sunlight, to optimize their performance. It is strongly recommended to observe the following points to ensure the best operation, functioning and battery lifetime:

Storage temperature and humidity BWR BW

-20 C to +50 C

-20 C to +50 C 40% - 70%

40% - 70%

Storage temperature Storage humidity Intended Use The VUSION electronic shelf label family is exclusively designed to connect to Access Points of the company SES-imagotag or acknowledged partners via radio. The device may only be used in areas where the environmental fulfill the requirements described in the chapter Environmental. Cleaning Instructions Clean the electronic label with the help of a damp cloth. Use only common household cleaners. Do not clean the label with alcohol, solvents and / or abrasive cleaning products. Note: Do not use liquid or aerosol cleaners and keep it away from water. Page 5 Improper use SES-imagotag shall not be responsible for defects resulting:

from use or storage which is harmful to the proper working of the product (e.g. abnormal use, incorrect maintenance and/or storage) and/or non-compliance with the applicable product environment specifications from a use of the product which does not comply with the recommendations and specifications of SES-imagotag from use or installation which is not compliant with the applicable functional description, or any other technical specifications provided by SES-imagotag Please note the following handling instructions, non-compliance is considered improper use:

Never open or disassemble the electronic device, only the battery may be replaced by trained users. Dont use the electronic device if it is defective. If the screen is defective, the ESL shall be replaced. Unauthorized changes or modifications to the electronic device and their components without the consent of SES-imagotag are not allowed. Dont use the electronic device with spare parts and accessories which are not tested and approved by SES-imagotag. Do not use labels above the lifetime/usage information (Display updates, LED usage, etc.) which was committed by contracts or given per datasheet Do not use labels out of specification / datasheet, e.g., use in ESLs in freezer area which per datasheet are not designed for such environment Please handle the ESL carefully. Prevent damage by water and intrusion of liquids into the label. Direct contact to water shall be prevented. Don't drop the label to the floor. If an ESL is dropped, check whether the label is still working or has any visible damages. Apply as little pressure as possible when inserting the ESL into the rail or when moving in the rail. Apply pressure only on the edge of the screen and at the level of the battery compartment, not on the screen itself. If the ESL is equipped with Easylock, only remove the ESLs from the rail with the provided tool for this purpose. Strictly avoid direct contact with groceries. Do not use harsh detergents containing alcohol or abrasive additives to clean the ESL Don't heat, charge, or bend the battery. We assume no liability for stolen labels. Keep the product and its batteries away from children. Don't throw the batteries into the garbage. Give them to a recycling company or contact SES-imagotag for handling advice. Don't throw the electronic device into the garbage. Give them to a recycling company or contact SES-imagotag for handling advice. Preferably transport all ESLs upright like in the original packaging. Never transport loosely packed labels Contact SES-imagotag for more details. Certificates Page 6 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION TO USERS Changes or modifications not expressly approved by the party responsible for compliance could void the user`s authority to operate the equipment. FCC rules apply to the following products: VUSION 1.5 (EDB1-0150-A); VUSION 1.6 (EDB1-0160-A); VUSION 2.1 (EDB1-0210-A); VUSION 2.2 (EDB1-0220-A, EDB1-

0220-B); VUSION 2.6 (EDB1-0260-A); VUSION 4.2 (EDB1-0420-A); VUSION 4.2 WP

(EWB1-0420-A); VUSION 7.4 (EDB1-0740-A) This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lemetteur/recepteur exempt de licence contenu dans le present appareil est conforme aux CNR dInnovation, Sciences et Developpement economique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorisee aux deux conditions suivantes:

1) Lappareil ne doit pas produire de brouillage;

2) Lappareil doit accepter tout brouillage radioelectrique subi, meme si lebrouillage est susceptible den compromettre le fonctionnement. IC standards apply to the following products: VUSION 1.5 (EDB1-0150-A);

VUSION 1.6 (EDB1-0160-A); VUSION 2.1 (EDB1-0210-A); VUSION 2.2 (EDB1-0220-

A, EDB1-0220-B); VUSION 2.6 (EDB1-0260-A); VUSION 4.2 (EDB1-0420-A);

VUSION 4.2 WP (EWB1-0420-A); VUSION 7.4 (EDB1-0740-A) Page 7

ses imagotag VUSION 2.1 BWR BU431 S/N: 07R21B01201-N240001197 Model: EDB1-0210-A FCC-ID: 2ACQM-EDB1-0210-A IC: 12154A-EDB10210A ID: w629-123AS Made in xxxxx TTT

FCC Agent Authorization Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern, 6/27/2023 We, SES-imagotag GmbH, FRN: 0024111486, hereby authorize TV AUSTRIA Services GmbH to act on our behalf in all matters relating to applications for equipment authorization of VUSION 2.1 FCC ID: 2ACQM-EDB1-0210-A, including the signing of all documents relating to these matters. Any and all acts carried out by TV AUSTRIA Services GmbH on our behalf shall have the same effect as acts of our own. All statements we make in our request for equipment authorization are true and correct to the best of our knowledge and belief. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Philipp Jauck, Head of IP Management & Regulatory Compliance SES-imagotag GmbH Kalsdorfer Strasse 12 8072 Fernitz-Mellach, Austria Mobil: +43 664 88252901 philipp.jauck@ses-imagotag.com www.ses-imagotag.com SES-imagotag GmbH I Kalsdorfer Strae 12 I A-8072 Fernitz-Mellach - AUSTRIA FB: FN350927w I HG : Graz I UID : ATU65936017 I WEEE : DE 65879240 T. +43 (0) 5 9460-400 I F. +43 (0) 5 9460-900 I E. office.at@ses-imagotag.com I www.ses-imagotag.com DocuSign Envelope ID: F9D16A83-51FC-4637-BC9B-51111613E4B5

CONFIDENTIALITY REQUEST Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 TO WHOM IT MAY CONCERN June 27, 2023 Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, SES-imagotag GmbH (FRN: 0023782022) requests confidentiality for the following products:

FCC ID Number Product: Title/Model o Product Code: EDB1-0210-A / FCC: 2ACQM-EDB1-0210-A For the product stated above, we request that the following information be held Long-Term confidential:

1. Circuit diagrams, BOM, and PCBs submitted as Equipment Authorization Electronic Filing attachment: folder: Hardware 2. Block diagram, Operational description submitted as Equipment Authorization For the product stated above, we request that the following information be held Short-Term confidential:

1. External photos 2. Test setup photos 3. Internal photos 4. User's manual The above exhibits contain SES-imagotag GmbH trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our Smart Tagging System. This material is not customarily available to the general public and we request that it be withheld from public inspection. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Philipp Jauck, Head of IP Management & Regulatory Compliance SES-imagotag GmbH Kalsdorfer Strasse 12 8072 Fernitz-Mellach, Austria Mobil: +43 664 88252901 philipp.jauck@ses-imagotag.com www.ses-imagotag.com SES-imagotag GmbH I Kalsdorfer Strae 12 I A-8072 Fernitz-Mellach - AUSTRIA FB: FN350927w I HG : Graz I UID : ATU65936017 I WEEE : DE 65879240 T. +43 (0) 5 9460-400 I F. +43 (0) 5 9460-900 I E. office.at@ses-imagotag.com I www.ses-imagotag.com DocuSign Envelope ID: F9D16A83-51FC-4637-BC9B-51111613E4B5

Coverletter:

SES-Imagotag GmbH wants to get FCC-Certification for the following device:

EDB1-0150-A. The unit will get the following FCC-ID: 2ACQM-EDB1-0150-A List of documents:

Exhibit Exhibit 01 Exhibit 02 Thema Label and placement Applicant Authorization Covered List US Agent for Service of Process Exhibit 03 External Photos

* Exhibit 04 Block Diagrams

* Exhibit 05 Schematic Diagrams Exhibit 06 Testreport Part 15 antenna information Exhibit 07 Test Set-up Photos Exhibit 08 User Manual Exhibit 09 Exhibit 11 Internal Photos RF exposure

* Exhibit 12 Operational Description Exhibit 13 Antenna information Cover letter File label_and_placement.pdf Authorization Letter FCC - VUSION 2.1 - EDB1-

0210-A.pdf TUV_Covered_List_FCC_IC_20230201_signed.pdf TUV_US Agent for Service of Process_20230208_2x_signed.pdf photos_external.pdf BTRTx008A00G_BlockDiagram_v1.0.pdf BTRTx008A00G_Schematics_v1.0.pdf 2023-IN-AT-TICL-E-EX-0-000018-FG-

029_signed_noPhotos.pdf Part 15 Antenna Information.pdf photos_setup.pdf VUSION Bluetooth LE Certification_manual_EN_20230705.pdf photos_internal.pdf 2023-IN-AT-TICL-E-EX-0-000018-FG-

029_signed_noPhotos.pdf Operational Description VUSION BLE_20230705.pdf AntennaSpecSheet_BTRTx008A00G.pdf This file Request for confidentiality Long Term - Short Term - VUSION 2.1 - EDB1-

0210-A.pdf For the Exhibits marked with * SES-imagotag GmbH requested Long-Term Confidentiality and for exhibits marked with SES-imagotag GmbH requested Short-Term Confidentiality according to 47 CFR 0.457 and 0.459 of the FCC rules because these are sensitive parts owned by this company and include much of know-how or sensitive data, it will not be provided to the public. The labelling on some photos may be not the actual status. The correct labelling is shown on the label photo in Exhibit 1.