FCC ID: 2ACQM-EDE2-0300-A Vusion Engage 3.0

VUSION Engage Product Manual VUSION Engage Product Specification SES-IMAGOTAG SES-imagotag GmbH I Kalsdorfer Strae 12 I A-8072 Fernitz-Mellach - AUSTRIA FB: FN350927w I HG : Graz I UID : ATU65936017 I WEEE : DE 65879240 T. +43 (0) 5 9460-400 I F. +43 (0) 5 9460-900 I E. office.at@ses-imagotag.com I www.ses-imagotag.com 1 VUSION Engage Product Manual Read all documents and system instructions carefully to minimize the risk of injuring persons and to avoid damage to the system or damage to the environment. Always keep all documents and guidance accessible. If necessary, the content of this document will be updated. You can request the latest version of the document via pdm.hardware@ses-imagotag.com. About ESLs An electronic shelf label is a device that shows article data and price information on its display. In comparison to printed labels the information is automatically updated if price or article data changes. In this product specification the focus is set on the product family VUSION Engage. With its 4-color displays it is a new product range and the line-up has the display sizes 1.6, 2.4, 3.0, 4.4 and 8.2. General Key Features 2.4 GHz proprietary radio protocol Radio coverage: up to 25 meters Bi-directional communication 11 available communication channels Ultra-low power consumption Full graphical e-Ink display with paper-like readability New 4-color display technology Super wide viewing angle (nearly 180 degrees) Flexible mounting options available May be used in landscape and portrait mode Fast response time 128-bit AES encryption with secure key exchange Multiple pages support with preloading and fast page switching Integrated Passive NFC tag The installation instructions are intended for trained electricians who can exhibit the following qualifications:

Knowledge of the use of tools and work instructions. Knowledge of the usable conditions of the tool. Knowledge of the electrical safety instructions. Knowledge of the electrical building regulations. Knowledge of the relevant standards. Knowledge of the assembly schedule SES-imagotag GmbH I Kalsdorfer Strae 12 I A-8072 Fernitz-Mellach - AUSTRIA FB: FN350927w I HG : Graz I UID : ATU65936017 I WEEE : DE 65879240 T. +43 (0) 5 9460-400 I F. +43 (0) 5 9460-900 I E. office.at@ses-imagotag.com I www.ses-imagotag.com VUSION Engage Product Manual Overview about VUSION Engage labels First Design Coin Cell Caption Model Resolution DPI Display colors Usable pages Battery Type Operating Voltage Nominal capacity VUSION Engage 1.6 VUSION Engage 2.4 VUSION Engage 3.0 VUSION Engage 4.4 VUSION Engage 8.2 EDE2-0160-A EDE1-0240-A EDE2-0240-A EDE2-0300-A EDE1-0440-A EDE2-0820-A 168x168 196x168 400x168 512x368 144 144 144 144 b/w/r/y b/w/r/y b/w/r/y b/w/r/y 4 4 4 4 Pouch Cell Pouch Cell Pouch Cell Pouch Cell Pouch Cell 3V 3V 3V 3V 3V 1100mAh 1900mAh 1900mAh 1900mAh 4000mAh SES-imagotag GmbH I Kalsdorfer Strae 12 I A-8072 Fernitz-Mellach - AUSTRIA FB: FN350927w I HG : Graz I UID : ATU65936017 I WEEE : DE 65879240 T. +43 (0) 5 9460-400 I F. +43 (0) 5 9460-900 I E. office.at@ses-imagotag.com I www.ses-imagotag.com 3 VUSION Engage Product Manual General remarks The SES-imagotag VUSION Labels must be installed according to the mounting instructions of the producer. In rare cases it may occur that the usage of wireless appliances is restricted by the building owner (e.g. Airport or Hospital). Please contact the appropriate authorities before installing the SES-imagotag VUSION Labels. Environmental General E-Paper displays are moisture and UV sensitive. The absolute rating operating environments describes the boundary conditions for updating the display while the absolute rating storage environment (see Storage and warehousing) describes the boundary conditions for a display not updating. BWR R2.0 E5 BWRY Operating temperature 0 C to +40 C 0C - 40C Cleaning Instructions Clean the electronic label with the help of a damp cloth. Use only common household cleaners. Do not clean the label with alcohol, solvents and / or abrasive cleaning products. Note: Do not use liquid or aerosol cleaners and keep it away from water. Temperature and Humidity Conditions High humidity combined with low temperature are not recommended. Low temperature will reduce the battery lifetime. SES-imagotag GmbH I Kalsdorfer Strae 12 I A-8072 Fernitz-Mellach - AUSTRIA FB: FN350927w I HG : Graz I UID : ATU65936017 I WEEE : DE 65879240 T. +43 (0) 5 9460-400 I F. +43 (0) 5 9460-900 I E. office.at@ses-imagotag.com I www.ses-imagotag.com 4 VUSION Engage Product Manual Storage and warehousing While displays are rated to perform according to specification for the warranty period at the absolute specified operating environment, the better the storage condition, the better the E-

Paper displays will perform. Like other moisture and UV sensitive components, we recommend that our labels are stored in temperature and humidity-controlled environments, and whenever possible, under below defined Optimal Storage Conditions, away from sunlight, to optimize their performance. It is strongly recommended to observe the following points to ensure the best operation, functioning and battery lifetime:

Storage temperature and humidity BWR 2.0 E5 BWRY

-20 C to +50 C

-20 C to +50 C 40% - 70%

40% - 70%

Storage temperature Storage humidity Intended Use The VUSION electronic shelf label family is exclusively designed to connect to Access Points of the company SES-imagotag or acknowledged partners via radio. The device may only be used in areas where the environmental fulfill the requirements described in the chapter Environmental. Cleaning Instructions Clean the electronic label with the help of a damp cloth. Use only common household cleaners. Do not clean the label with alcohol, solvents and / or abrasive cleaning products. Note: Do not use liquid or aerosol cleaners and keep it away from water. SES-imagotag GmbH I Kalsdorfer Strae 12 I A-8072 Fernitz-Mellach - AUSTRIA FB: FN350927w I HG : Graz I UID : ATU65936017 I WEEE : DE 65879240 T. +43 (0) 5 9460-400 I F. +43 (0) 5 9460-900 I E. office.at@ses-imagotag.com I www.ses-imagotag.com VUSION Engage Product Manual Improper use SES-imagotag shall not be responsible for defects resulting:

from use or storage which is harmful to the proper working of the product (e.g. abnormal use, incorrect maintenance and/or storage) and/or non-compliance with the applicable product environment specifications from a use of the product which does not comply with the recommendations and specifications of SES-imagotag from use or installation which is not compliant with the applicable functional description, or any other technical specifications provided by SES-imagotag Please note the following handling instructions, non-compliance is considered improper use:

Never open or disassemble the electronic device, only the battery may be replaced by trained users. Dont use the electronic device if it is defective. If the screen is defective, the ESL shall be replaced. Unauthorized changes or modifications to the electronic device and their components without the consent of SES-imagotag are not allowed. Dont use the electronic device with spare parts and accessories which are not tested and approved by SES-imagotag. Do not use labels above the lifetime/usage information (Display updates, LED usage, etc.) which was committed by contracts or given per datasheet Do not use labels out of specification / datasheet, e.g., use in ESLs in freezer area which per datasheet are not designed for such environment Please handle the ESL carefully. Prevent damage by water and intrusion of liquids into the label. Direct contact to water shall be prevented. Don't drop the label to the floor. If an ESL is dropped, check whether the label is still working or has any visible damages. Apply as little pressure as possible when inserting the ESL into the rail or when moving in the rail. Apply pressure only on the edge of the screen and at the level of the battery compartment, not on the screen itself. If the ESL is equipped with Easylock, only remove the ESLs from the rail with the provided tool for this purpose. Strictly avoid direct contact with groceries. Do not use harsh detergents containing alcohol or abrasive additives to clean the ESL Don't heat, charge, or bend the battery. We assume no liability for stolen labels. Keep the product and its batteries away from children. Don't throw the batteries into the garbage. Give them to a recycling company or contact SES-imagotag for handling advice. Don't throw the electronic device into the garbage. Give them to a recycling company or contact SES-imagotag for handling advice. SES-imagotag GmbH I Kalsdorfer Strae 12 I A-8072 Fernitz-Mellach - AUSTRIA FB: FN350927w I HG : Graz I UID : ATU65936017 I WEEE : DE 65879240 T. +43 (0) 5 9460-400 I F. +43 (0) 5 9460-900 I E. office.at@ses-imagotag.com I www.ses-imagotag.com VUSION Engage Product Manual Preferably transport all ESLs upright like in the original packaging. Never transport loosely packed labels Contact SES-imagotag for more details. SES-imagotag GmbH I Kalsdorfer Strae 12 I A-8072 Fernitz-Mellach - AUSTRIA FB: FN350927w I HG : Graz I UID : ATU65936017 I WEEE : DE 65879240 T. +43 (0) 5 9460-400 I F. +43 (0) 5 9460-900 I E. office.at@ses-imagotag.com I www.ses-imagotag.com Certificates VUSION Engage Product Manual Hereby, SES-Imagotag GmbH declares that the radio equipment VUSION Engage 2.4

(EDE1-0240-A) and VUSION Engage 4.4 (EDE1-0440-A) is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://www.ses-imagotag.com/en/electronic-shelf-labels/doc-vusion-

labels/

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION TO USERS Changes or modifications not expressly approved by the party responsible for compliance could void the user`s authority to operate the equipment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lemetteur/recepteur exempt de licence contenu dans le present appareil estconforme aux CNR dInnovation, Sciences et Developpement economique Canadaapplicables aux appareils radio exempts de licence. Lexploitation est autoriseeaux deux conditions suivantes:

1) Lappareil ne doit pas produire de brouillage;

2) Lappareil doit accepter tout brouillage radioelectrique subi, meme si lebrouillage est susceptible den compromettre le fonctionnement. IC standards apply to the following products: : VUSION Engage 2.4 (EDE1-0240-A) and VUSION Engage 4.4 (EDE1-0440-A) SES-imagotag GmbH I Kalsdorfer Strae 12 I A-8072 Fernitz-Mellach - AUSTRIA FB: FN350927w I HG : Graz I UID : ATU65936017 I WEEE : DE 65879240 T. +43 (0) 5 9460-400 I F. +43 (0) 5 9460-900 I E. office.at@ses-imagotag.com I www.ses-imagotag.com

[ ses imagotag VUSION Engage 3.0 BWRY GU440

\ S/N: 06M30S03201-H030001197 bs Model: EDE2-0300-A a FCC ID: 2ACQM-EDE2-0300-A IC: 12154A-EDE20300A C Label ID: AD012345 oe sa0n00ay 201 19987 wOoco : FPN eso0cezery- < OSOSWS0 -WS Orrnd ANMGE 0 Se6uz NOISNA 6n)06c\."1ses

CONFIDENTIALITY REQUEST Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 January 26th, Fernitz TO WHOM IT MAY CONCERN Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, SES-imagotag GmbH (FRN: 0023782022) requests confidentiality for the following products:

FCC ID Number Product: Title/Model o Product Code: EDE2-0300-A/ FCC: 2ACQM-EDE2-0300-A For the product stated above, we request that the following information be held Long-Term confidential:

1. Circuit diagrams, BOM, and PCBs submitted as Equipment Authorization Electronic Filing attachment: folder: Hardware 2. Block diagram, Operational description submitted as Equipment Authorization For the product stated above, we request that the following information be held Short-Term confidential:

1. External photos 2. Test setup photos 3. Internal photos 4. Usermanual The above exhibits contain SES-imagotag GmbH trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our Smart Tagging System. This material is not customarily available to the general public and we request that it be withheld from public inspection. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Philipp Jauck, Head of IP Management & Regulatory Compliance SES-imagotag GmbH Kalsdorfer Strasse 12 8072 Fernitz-Mellach, Austria Mobil: +43 664 88252901 philipp.jauck@ses-imagotag.com www.ses-imagotag.com Page 1/1

Coverletter:

SES-Imagotag GmbH wants to get FCC-Certification for the following device:

EDE2-0300-A. The unit will get the following FCC-ID: 2ACQM-EDE2-0300-A List of documents:

Exhibit Exhibit 01 Exhibit 02 Thema File Label and placement Covered List label_and_placement.pdf TV_Covered_List_FCC_IC_20230201_signed.pdf US Agent for Service of Process Exhibit 03 External Photos

* Exhibit 04 Block Diagrams

* Exhibit 05 Schematic Diagrams Exhibit 06 Testreport Exhibit 07 Test Set-up Photos Exhibit 08 User Manual TV_US Agent for Service of Process_20230208_2x_signed.pdf photos_external.pdf RFRTx060D00A_BlockDiagram_v3.0.pdf RFRTx060D00A_Schematics_v3.0.pdf 2023-IN-AT-TICL-E-EX-000018-FG-004_signed_2x no photos.pdf photos_setup.pdf VUSION Engage_Certification_manual_EN_20230207.pdf photos_internal.pdf

see test report Exhibit 09 Exhibit 10 Exhibit 11

* Exhibit 12 Operational Description FCC Protocol Timing Specification.pdf Internal Photos Informations RF exposure Exhibit 13 Cover letter Operational Description VUSION_Engage_20230207.pdf This file Request for confidentiality Long Term - Short Term Confidentiality Request_FCC_EDE2-0300-

A_20230126_signed.pdf For the Exhibits marked with * SES-imagotag GmbH requested Long-Term Confidentiality and for exhibits marked with SES-imagotag GmbH requested Short-Term Confidentiality according to 47 CFR 0.457 and 0.459 of the FCC rules because these are sensitive parts owned by this company and include much of know-how or sensitive data, it will not be provided to the public. The labelling on some photos may be not the actual status. The correct labelling is shown on the label photo in Exhibit 1.

Covered List, 2.911(d)(5) Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 February 1, 2023 To whom it may concern, regarding the FCC 22-84 Report and Order and the Commissions Covered List https://www.fcc.gov/supplychain/coveredlist.1 SES-imagotag GmbH (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. SES-imagotag GmbH (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Philipp Jauck Head of IP Management & Regulatory Compliance Phone: +43 664 88252901 philipp.jauck@ses-imagotag.com www.ses-imagotag.com SES-imagotag GmbH Kalsdorfer Strasse 12 8072 Fernitz-Mellach Austria 1 The inclusion of producers or providers of equipment or services identified on this list should be read to include the subsidiaries and affiliates of such entities. SES-imagotag GmbH I Kalsdorfer Strae 12 I A-8072 Fernitz-Mellach - AUSTRIA CR: FN350927w I Commercial court: Graz I UID : ATU65936017 T. +43 (0) 5 94604-00 I E. office.at@ses-imagotag.com I www.ses-imagotag.com

U.S. Agent for Service of Process, 2.911(d)(7) Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern, February 8, 2023 As required by section US Code Title 47 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicants agent for service of process, regardless of whether the applicant is a domestic or foreign entity. We, SES-Imagotag Inc. accept the obligation to act as U.S. agent for service of process on behalf of the applicant. Adress:

SES-Imagotag Inc. 625 N. Michigan Ave., Suite 650 Chicago, IL 60611 United States Email: sales.na@ses-imagotag.com We, SES-imagotag GmbH consent to SES-Imagotag Inc. acting as our U.S. agent for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. SES-imagotag GmbH I Kalsdorfer Strae 12 I A-8072 Fernitz-Mellach - AUSTRIA CR: FN350927w I Commercial court: Graz I UID : ATU65936017 T. +43 (0) 5 94604-00 I E. office.at@ses-imagotag.com I www.ses-imagotag.com DocuSign Envelope ID: EE0D6C40-A92A-4B65-B3CB-00B6AA0288EB Sincerely, The U.S. Agent for Service of Process:

Philippe Bottine (CEO) SES-Imagotag Inc. 625 N. Michigan Ave., Suite 650 Chicago, IL 60611 United States The Applicant for Equipment Authorization:

Signature (can be electronically inserted) Philipp Jauck Head of IP Management & Regulatory Compliance Signature (can be electronically inserted) SES-imagotag GmbH Kalsdorfer Strasse 12 8072 Fernitz-Mellach Austria SES-imagotag GmbH I Kalsdorfer Strae 12 I A-8072 Fernitz-Mellach - AUSTRIA CR: FN350927w I Commercial court: Graz I UID : ATU65936017 T. +43 (0) 5 94604-00 I E. office.at@ses-imagotag.com I www.ses-imagotag.com DocuSign Envelope ID: EE0D6C40-A92A-4B65-B3CB-00B6AA0288EB