FCC ID: 2ACQM-EDF3-0260-B VUSION Sway 2.6

VUSION - Electronic Shelf Labels Read all documents and system instructions carefully to minimize the risk of injuring persons and to avoid damage to the system or damage to the environment. Always keep all documents and guidance accessible. If necessary, the content of this document will be updated. You can request the latest version of the document via office.at@ses-imagotag.com. Register at the https://portal.imagotag.com to get access to the latest software and documentation. An electronic shelf label is a device that shows article data and price information on its display. In comparison to printed labels the information is automatically updated if price or article data changes. The SES-imagotag electronic shelf label family offers high-quality display options, operating with a replaceable battery, thus working without any external power supply. The SES-imagotag VUSION (2.4GHz) electronic shelf label family can change all pixels to black, white or red/yellow. The current line-up has display sizes from 1.6 inch to 12.2 inch. They may be used in landscape and portrait mode and can be configured in terms of radio, theft protection, display protection and LED flash. General Key Features 2.4 GHz proprietary radio protocol Radio coverage: up to 25 meters Bi-directional communication 11 available communication channels Ultra-low power consumption Customer-replaceable battery Full graphical e-Ink display with paper-like readability e-ink displays are available (Black/White, Black/White/Red, Black/White/Yellow) Different configurations available (theft protection, display protection, LED flash) Label versions for deep-freezing environments Super wide viewing angle (nearly 180 degrees) Flexible mounting options available May be used in landscape and portrait mode Fast response time 128-bit AES encryption with secure key exchange Multiple pages support with preloading and fast page switching Integrated Passive NFC tag The installation instructions are intended for trained electricians who can exhibit the following qualifications:

Knowledge of the use of tools and work instructions. Knowledge of the usable conditions of the tool. Knowledge of the electrical safety instructions. Knowledge of the electrical building regulations. Knowledge of the relevant standards. Knowledge of the assembly schedule. SES-imagotag GmbH I Kalsdorfer Strae 12 I A-8072 Fernitz-Mellach - AUSTRIA CR: FN350927w I Commercial court: Graz I UID : ATU65936017 T. +43 (0) 5 94604-00 I E. office.at@ses-imagotag.com I www.ses-imagotag.com The power supply are cell-button batteries. The following table will give you a short overview about all kinds of labels and their batteries. Caption Model Display Resolution Active Display Area

(mm) Display colors Usable pages Battery Type Operati ng Voltage Nominal capacity Wake up

(seco nds) Battery lifetime 5 years with N updates per day VUSION 1.6 VUSION 2.2 VUSION 2.2 F VUSION 2.6 VUSION 2.6 F VUSION 2.7 VUSION 2.9 VUSION 2.9 F VUSION 3.7 VUSION 4.2 VUSION 4.5 VUSION 5.9 VUSION 6.0 VUSION 7.4 VUSION 9.7 EDG2-0160-A EDG3-0160-A EDG2-0220-A EDG3-0220-A EDG3-0220-B EDG2-0220-A EDG2-0260-A EDG3-0260-A EDG2-0260-A EDG2-0270-A EDG2-0270-B EDG3-0290-A EDG3-0290-A EDG2-0370-A EDG2-0420-A EDG2-0420-B EDG2-0450-A EDG2-0590-A EDG3-0590-A EDG4-0590-A EDG3-0600-A EDG2-0740-A EDG3-0740-A EDG2-0970-A EDG3-0970-A EDG4-0970-A 152x152 27.5 x 27.5 212x104 48.6 x 23.8 212x104 296x152 48.6 x 23.8 60.1 x 30.7 296x152 264x176 60.1 x 30.7 57.3 x 38.2 b/w/r b/w/y b/w/r b/w/y b/w b/w/r b/w/y b/w b/w/r 384 x 168 384 x 168 416x240 400x300 480x176 720x256 67,6 x 29,6 67,6 x 29,6 81.54 x 47.04 84.8 x 63.6 b/w/r b/w b/w/r b/w/r b/w/y b/w/r b/w/y 138.96 x 49.40 b/w/r 104.2 x 38.2 600x448 480x800 114.9 x 85.8 97 x 161.6 960x672 201.60 141.12 b/w/r b/w/r b/w/y b/w/r x SES-imagotag GmbH I Kalsdorfer Strae 12 I A-8072 Fernitz-Mellach - AUSTRIA CR: FN350927w I Commercial court: Graz I UID : ATU65936017 T. +43 (0) 5 94604-00 I E. office.at@ses-imagotag.com I www.ses-imagotag.com 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 1xCR2450 3V 550 mAh 30 2xCR2450 3V 1100 mAh 15 2xCR2450 3V 2xCR2450 3V 1100 mAh 30 1100 mAh 15 2xCR2450 3V 2xCR2450 3V 1100 mAh 30 1100 mAh 15 2xCR2450 3V 2xCR2450 3V 3xCR2450 3V 3xCR2450 3V 1100 mAh 15 1100 mAh 15 1650 mAh 15 1650 mAh 15 3xCR2450 3V 1650 mAh 15 5xCR2450 3V 2750 mAh 15 3xCR2450 3V 4xCR2450 3V 1650 mAh 15 2200 mAh 15 8xCR2450 3V 4400 mAh 15 1 2 1 2 1 2 2 1 2 2 2 2 2 2 2 VUSION 12.2 VUSION Sway 2.6 VUSION Sway 2.6 EDG2-1220-A EDG3-1220-A EDF3-0260-A 768x960 296 x 152 b/w/r 190.08 x 237.6 b/w/y b/w/r 60.0 x 31.0 6 4 6xCR2450 3V 3300 mAh 15 1 1CR2450 3V 550 mAh

EDF3-0260-B 296 x 152 60.0 x 31.0 b/w/r 4 1CR2450 3V 550 mAh

VUSION DYN 2.3 LCG3-0230-A 256x128 51.7 x 25.4 b/w 4 2xCR2450 3V 1100 mAh

Note: battery lifetime can vary depending on the operating conditions of the labels (temperature, radio usage etc). Up to 3 years with 1 update per day Up to 3 years with 1 update per day 5 years Page 3 General remarks The SES-imagotag VUSION Labels must be installed according to the mounting instructions of the producer. In rare cases it may occur that the usage of wireless appliances is restricted by the building owner (e.g. Airport or Hospital). Please contact the appropriate authorities before installing the SES-imagotag VUSION Labels. Environmental General E-Paper displays are moisture and UV sensitive. The absolute rating operating environments describes the boundary conditions for updating the display while the absolute rating storage environment (see Storage and warehousing) describes the boundary conditions for a display not updating. Operating temperature Operating temperature for maximum lifetime Operating humidity

(non condensing) BW 0 C to +45 C BW (Freezer)

-25 C to +10 C BWR R1.2 10 C to +40 C BWR R2.0 0 C to +40 C BWY Y1.2 10 C to +40 C 21 C 21 C 21 C 21 C 21 C 30% - 80%

30% - 80%

35% - 70%

35% - 70%

40% - 60%

Cleaning Instructions Clean the electronic label with the help of a damp cloth. Use only common household cleaners. Do not clean the label with alcohol, solvents and / or abrasive cleaning products. Note: Do not use liquid or aerosol cleaners and keep it away from water. Temperature and Humidity Conditions High humidity combined with low temperature are not recommended. Low temperature will reduce the battery lifetime. Storage and warehousing While displays are rated to perform according to specification for the warranty period at the absolute specified operating environment, the better the storage condition, the better the E-Paper displays will perform. Like other moisture and UV sensitive components, we recommend that our labels are stored in temperature and humidity-controlled environments, and whenever possible, under below defined Optimal Storage Conditions, away from sunlight, to optimize their performance. It is strongly recommended to observe the following points to ensure the best operation, functioning and battery lifetime:

Storage temperature and humidity BW

-20 C to +50 C 30% - 80%

Storage temperature Storage humidity BW (Wide temp/Freezer)

-20 C to +50 C 30% - 80%

BWR

-20 C to +50 C 40% - 70%

SES-imagotag GmbH I Kalsdorfer Strae 12 I A-8072 Fernitz-Mellach - AUSTRIA CR: FN350927w I Commercial court: Graz I UID : ATU65936017 T. +43 (0) 5 94604-00 I E. office.at@ses-imagotag.com I www.ses-imagotag.com Optimal storage temperature 0 C to +30 C 0 C to +30 C 0 C to +30 C Optimal storage humidity

(non-condensing) 40% - 60%

40% - 60%

40% - 60%

Do not operate any ESL Infrastructure (e.g. SES-imagotag AP-2010 or MAP 2014T/Lancom L-151E, ... ) in warehouse storing labels or where the radio coverage will activate stored labels. o The label will permanently try to connect to the access point, leading to less usable battery lifetime. The maximum storage time of labels should not exceed 0.5-1 year If these listed limits are not complied, the specified battery lifetime can vary, and display quality can be influenced negatively. LCD Display (LCG3-0230-A) VUSION 2.3 DYN has LCD display. Operating temperature: 0 C to 50 C Intended Use The VUSION electronic shelf label family is exclusively designed to connect to Access Points of the company SES-imagotag or acknowledged partners via radio. The device may only be used in areas where the environmental fulfill the requirements described in the chapter Environmental. Improper use The SES-imagotag is not responsible and does not assume liability for damage or injury to persons, property, environment and the VUSION electronic shelf label family itself caused by improper installation or improper handling. The operator assumes liability for any damage that results from improper use. The following usage is not allowed:

Don't drop VUSION Family Labels. Keep VUSION Family Labels away from water. Dont use the VUSION Labels with defective parts. Dont use the VUSION Labels with spare parts and accessories which are not examined and approved by SES-imagotag. Unauthorized changes or modifications to the VUSION Labels and their components without the consent of SES-imagotag are strictly forbidden. The SES-imagotag VUSION Labels do not contain parts, except batteries, that are allowed to be maintained by the user. The SES-imagotag VUSION Labels must NOT be dismantled. For necessary maintenance or repair works always contact the manufacturer. Don't throw VUSION Labels into the dustbin. Deposit VUSION Labels at a reprocessing company. Contact SES-imagotag for more details about the removal process. Page 5 Please do not use any liquid or spray cleaners directly on the surface of the VUSION Labels. SES-imagotag takes no responsibility for stolen VUSION Labels without encryption. KEEP BATTERIES OUT OF REACH OF CHILDREN Swallowing batteries may lead to serious injury in as little as 2 hours or death, due to chemical burns and potential perforation of the esophagus. If you suspect your child has swallowed or inserted a button battery immediately call local Poisons Information Authority, with contact information available online. Don't heat, recharge or bend the battery. Examine devices and make sure the battery compartment is correctly secured, e.g. that the screw or other mechanical fastener is tightened. Do not use if the compartment is not secure. Dispose used button batteries immediately and safely. Empty batteries can still cause harm. Tell others about the risk associated with button batteries and how to keep their children safe. To learn how to use battery door opener check out the video tutorial https://vimeo.com/173469013/01c9f17b10 Certificates Hereby, SES-Imagotag GmbH declares that the radio equipment VUSION 1.6"

(EDG2-0160-A, EDG3-0160-A), VUSION 2.2" (EDG2-0220-A, EDG3-0220-A, EDG3-

0220-B), VUSION 2.2" F (EDG2-0220-A), VUSION 2.6" (EDG2-0260-A, EDG3-0260-

A), VUSION 2.6" F (EDG2-0260-A), VUSION 2.7" (EDG2-0270-A, EDG2-0270-B), VUSION 2.9" (EDG3-0290-A), VUSION 2.9" F (EDG3-0290-A), VUSION 3.7" (EDG2-

0370-A), VUSION 4.2" (EDG2-0420-A, EDG2-0420-B), VUSION 4.5" (EDG2-0450-A), VUSION 5.9" (EDG2-0590-A, EDG3-0590-A), VUSION 6.0" (EDG3-0600-A), VUSION 7.4" (EDG2-0740-A), VUSION 9.7" (EDG2-0970-A, EDG3-0970-A), VUSION 12.2"

(EDG2-1220-A, EDG3-1220-A), VUSION Sway 2.6 (EDF3-0260-A), VUSION 2.3 DYN

(LCG3-0230-A) is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity internet address:

https://www.ses-imagotag.com/wp-

content/uploads/2019/11/DoC_VUSION_V2.pdf is available at the following This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION TO USERS Changes or modifications not expressly approved by the party responsible for compliance could void the user`s authority to operate the equipment. Page 6 FCC rules apply to the following products: VUSION 1.6" (EDG2-0160-A, EDG3-0160-

A), VUSION 2.2" (EDG2-0220-A, EDG3-0220-A, EDG3-0220-B), VUSION 2.2" F (EDG2-

0220-A), VUSION 2.6" (EDG2-0260-A, EDG3-0260-A), VUSION 2.6" F (EDG2-0260-

A), VUSION 2.7" (EDG2-0270-A, EDG2-0270-B), VUSION 2.9" (EDG3-0290-A), VUSION 2.9" F (EDG3-0290-A), VUSION 3.7" (EDG2-0370-A), VUSION 4.2" (EDG2-

0420-A, EDG2-0420-B), VUSION 4.5" (EDG2-0450-A), VUSION 5.9" (EDG2-0590-A, EDG3-0590-A), VUSION 6.0" (EDG3-0600-A), VUSION 7.4" (EDG2-0740-A), VUSION 9.7" (EDG2-0970-A, EDG3-0970-A), VUSION 12.2" (EDG2-1220-A, EDG3-1220-A), VUSION Sway 2.6 (EDF3-0260-A), VUSION 2.3 DYN (LCG3-0230-A) This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lemetteur/recepteur exempt de licence contenu dans le present appareil estconforme aux CNR dInnovation, Sciences et Developpement economique Canadaapplicables aux appareils radio exempts de licence. Lexploitation est autoriseeaux deux conditions suivantes:

1) Lappareil ne doit pas produire de brouillage;

2) Lappareil doit accepter tout brouillage radioelectrique subi, meme si lebrouillage est susceptible den compromettre le fonctionnement. IC standards apply to the following products: : VUSION 1.6" (EDG2-0160-A, EDG3-

0160-A), VUSION 2.2" (EDG2-0220-A, EDG3-0220-A, EDG3-0220-B), VUSION 2.2" F

(EDG2-0220-A), VUSION 2.6" (EDG2-0260-A, EDG3-0260-A), VUSION 2.6" F (EDG2-

0260-A), VUSION 2.7" (EDG2-0270-A, EDG2-0270-B), VUSION 2.9" (EDG3-0290-A), VUSION 2.9" F (EDG3-0290-A), VUSION 3.7" (EDG2-0370-A), VUSION 4.2" (EDG2-

0420-A, EDG2-0420-B), VUSION 4.5" (EDG2-0450-A), VUSION 5.9" (EDG2-0590-A, EDG3-0590-A), VUSION 6.0" (EDG3-0600-A), VUSION 7.4" (EDG2-0740-A), VUSION 9.7" (EDG2-0970-A, EDG3-0970-A), VUSION 12.2" (EDG2-1220-A, EDG3-1220-A), VUSION Sway 2.6 (EDF3-0260-A), VUSION 2.3 DYN (LCG3-0230-A) NCC rules apply to the following products: VUSION 1.6" (EDG2-0160-A), VUSION 2.2" (EDG2-0220-A, EDG3-0220-B), VUSION 2.2" F (EDG2-0220-A), VUSION 2.6"

(EDG2-0260-A, EDG3-0260-A), VUSION 2.6" F (EDG2-0260-A), VUSION 4.2"

(EDG2-0420-A), VUSION 4.2" (EDG2-0420-B), VUSION 4.5" (EDG2-0450-A), VUSION 7.4" (EDG2-0740-A), VUSION 9.7" (EDG2-0970-A, EDG3-0970-A), VUSION 12.2" (EDG2-1220-A) Page 7 Japan This device is granted pursuant to the Japanese Radio Law under the grant ID n :

201-180158 (Model: EDG2-0160-A) 219-210021 (Model: EDG3-0160-A) 201-180162 (Model: EDG2-0220-A) 219-210003 (Model: EDG3-0220-B) 201-180029 (Model: EDG2-0260-A) 219-210005 (Model: EDG3-0260-A) 201-180159 (Model: EDG2-0420-A) 020-200028 (Model: EDG2-0420-B) 201-190006 (Model: EDG2-0450-A) 201-180160 (Model: EDG2-0740-A) 219-210006 (Model: EDG2-0970-A) 219-210009 (Model: EDG3-0970-A) 201-180711 (Model: EDG2-1220-A) 219-210018 (Model: EDG3-1220-A) This device should not be modified (otherwise the granted designation number will become invalid)

201-180158 (Model: EDG2-0160-A) 219-210021 (Model: EDG3-0160-A) 201-180162 (Model: EDG2-0220-A) 219-210003 (Model: EDG3-0220-B) 201-180029 (Model: EDG2-0260-A) 219-210005 (Model: EDG3-0260-A) 201-180159 (Model: EDG2-0420-A) 020-200028 (Model: EDG2-0420-B) 201-190006 (Model: EDG2-0450-A) 201-180160 (Model: EDG2-0740-A) 219-210006 (Model: EDG2-0970-A) 219-210009 (Model: EDG3-0970-A) 201-180711 (Model: EDG2-1220-A) 219-210018 (Model: EDG3-1220-A) Singapore Valid for : VUSION 1.6 (EDG2-0160-A), VUSION 2.2 (EDG2-0220-A, EDG3-0220-B), VUSION 2.6

(EDG2-0260-A, EDG3-0260-A), VUSION 4.2 (EDG2-0420-A, EDG2-0420-B), VUSION 7.4 (EDG2-

0740-A) Complies with IMDA Standards DA106041 Page 8 Mexico Valid for : VUSION 1.6 (EDG2-0160-A, EDG3-0160-A), VUSION 2.2 (EDG2-0220-A, EDG3-0220-

B), VUSION 2.6 (EDG2-0260-A, EDG3-0260-A), VUSION 4.2 (EDG2-0420-B), VUSION 7.4

(EDG2-0740-A) La operacin de este equipo est sujeta a las siguientes dos condiciones:

(1) es posible que este equipo o dispositivo no cause interferencia perjudicial y

(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. Page 9

Appendix 2 Photodocumentation Description: Rear view Division:

Industry & Energy Test report reference:

2022-IN-AT-TICL-E-EX-

000299-FG-004 Page: 2 of 10 Date: 16.09.2022 V T

t a

. v u

o t f n i

t a

. v u t

. w w w DN- FM-INE-EMV-ALL-Anl2_en Rev00

CONFIDENTIALITY REQUEST Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 September 05th, 2022 TO WHOM IT MAY CONCERN Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, SES-imagotag GmbH (FRN: 0023782022) requests confidentiality for the following products:

FCC ID Number Product: Title/Model o Product Code: EDF3-0260-B / FCC: 2ACQM-EDF3-0260-B For the product stated above, we request that the following information be held Long-Term confidential:

1. Circuit diagrams, BOM, and PCBs submitted as Equipment Authorization Electronic Filing attachment: folder: Hardware 2. Block diagram, Operational description submitted as Equipment Authorization For the product stated above, we request that the following information be held Short-Term confidential:

1. External photos 2. Test setup photos 3. Internal photos 4. Usermanual The above exhibits contain SES-imagotag GmbH trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our Smart Tagging System. This material is not customarily available to the general public and we request that it be withheld from public inspection. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Philipp Jauck, Head of IP Management & Regulatory Compliance SES-imagotag GmbH Kalsdorfer Strasse 12 8072 Fernitz-Mellach, Austria Mobil: +43 664 88252901 philipp.jauck@ses-imagotag.com www.ses-imagotag.com Page 1/1

Coverletter:

SES-Imagotag GmbH wants to get FCC-Certification for the following device:

EDF3-0260-B. The unit will get the following FCC-ID: 2ACQM-EDF3-0260-B Regarding the URGENT CLARIFICATION - FCC Area of Concern-Antenna Gain Information from 2022-08-26:

Field strength measurements are applicable for this device. Antenna construction information is provided as operational description exhibit. List of documents:

Thema Label and placement Not needed Exhibit Exhibit 01 Exhibit 02 Exhibit 03 External Photos

* Exhibit 04 Block Diagrams

* Exhibit 05 Schematic Diagrams Exhibit 06 Testreport Exhibit 07 Test Set-up Photos Exhibit 08 User Manual Exhibit 09 Exhibit 10 Exhibit 11

* Exhibit 12 Operational Description Internal Photos Informations RF exposure File label_and_placement.pdf

photos_external.pdf RFRTx057A0Ax_BlockDiagram_v1.0.pdf RFRTx057A0AA_Schematics_v1.0.pdf 2022-IN-AT-TICL-E-EX-000299-FG-

004_signed_noPhotos.pdf photos_setup.pdf VUSION_Certification_manual_EN_20220905.pdf photos_internal.pdf

see test report Operational Description VUSION_20220905.pdf Transmission Protocol FCC Protocol Timing Specification.pdf Antenna information for Urgent Clarification Cover letter Exhibit 13 Antenna construction information.pdf This file Request for confidentiality Long Term - Short Term Confidentiality Request_FCC_EDF3-0260-

B_20220905_signed.pdf For the Exhibits marked with * SES-imagotag GmbH requested Long-Term Confidentiality and for exhibits marked with SES-imagotag GmbH requested Short-Term Confidentiality according to 47 CFR 0.457 and 0.459 of the FCC rules because these are sensitive parts owned by this company and include much of know-how or sensitive data, it will not be provided to the public. The labelling on some photos may be not the actual status. The correct labelling is shown on the label photo in Exhibit 1.