Anchor Vista OmniLight Reference node for Real Time Location System User Manual rev0.1 l a u n a M r e s U r o h c n A Anchor Vista, reference node for real time location system. EN Sewio Networks, s.r.o, www.sewio.net, email:info@sewio.net 1 l a u n a M r e s U r o h c n A Technical Parameters Size Weight Power Supply Power Requirements Operating Conditions Warm-up Time Environment Placement UWB Antenna UWB Radiated Power CH5 6240 6739.2 MHz 74 x 74 x 25 mm 73 g PoE 802.3af 2.5 W
-20 - 60 C 20 85% humidity Immediate Household environment Retail Building / Offices Automotive, Industrial Machinery Indoor Only Omnidirectional
-41.3 dBm/MHz 2 Sewio Networks, s.r.o, www.sewio.net, email:info@sewio.net Power-Up Power Over Ethernet l a u n a M r e s U r o h c n A Please connect the Anchor to a network switch supporting PoE IEEE 802.3af standard and connect the Anchor with shielded Ethernet cable. Once the Anchor is connected to a stable power supply, the blue LED blinks several times, which indicates the anchor has been turned ON. Then the LED is turned OFF. Device Mounting Please follow the Vista OmniLight Assembly Guide. The device is shipped with a pre-mounted antenna. Never use Vista OmniLight without an antenna. Only the original antenna can be attached to the device. The antenna must be firmly connected to the anchor. Sewio Networks, s.r.o, www.sewio.net, email:info@sewio.net 3 l a u n a M r e s U r o h c n A Host to Anchor Connection Setting up and operating the Anchor is done exclusively via RTLS Studio software. RTLS Studio software is available through Sewio partner portal. For more information please follow the official documentation page available at https://docs.sewio.net. Sewio Networks, s.r.o, www.sewio.net, email:info@sewio.net 4 l a u n a M r e s U r o h c n A Regulatory Information For FCC compliance, the following conditions must be me:
All units must be exclusively used indoors. No devices may be installed at any outdoor locations. This device is designed to be operated with the supplied antenna. The use of any other antenna with this device is strictly prohibited and may result in the voiding of the FCC authorization for this equipments operation. It is strictly forbidden to use of any other antenna than the one Sewio Networks s.r.o has supplied. This device is compliant with FCC Rules, part 15. Its usage is subject to the two following conditions:
(1) this device may not be the cause of any harmful interference, and (2) this device shall accept any interference received, including interference that may interfere with its desired operation. This device is also in compliance with part 15.517 of the FCC Rules. This equipment may only be used indoors. Usage outdoors violates 47 U.S.C. 301 and the operator could be subject to serious legal penalties. This equipment is only to be installed and used at a 20 cm minimum distance between the radiator and a person. Any changes or modifications that have not been expressly agreed to by the Sewio Networks s.r.o could invalidate the user's authority to use the equipment DISCLAIMER The information contained within this document is subject to change without prior notice. Sewio Networks s.r.o accepts no responsibility for any Sewio Networks, s.r.o, www.sewio.net, email:info@sewio.net 5 inaccuracies or omissions and specifically rejects any losses, liabilities, or risks, personal or otherwise, sustained as a consequence, directly or otherwise, of the use or application of anything contained within this document. In order to obtain the latest documentation, contact Sewio Networks s.r.o. l a u n a M r e s U r o h c n A Sewio Networks, s.r.o, www.sewio.net, email:info@sewio.net 6