FCC ID: 2A229MSDTST Movement Sensor Device

USER MANUAL Title:

SWH - Movement Sensor Device - Installation and configuration Manual Summary:

Installation and configuration Manual of Movement Sensor Device 1/(7) Prod. #

Doc. #

Rev:

Date:

Author:

Review:

010103 03 A 16/03/2022 SMV TITLE SWH - Movement Sensor Device - Installation and configuration Manual. SUMMARY Installation and configuration Manual of Movement Sensor Device. PURPOSE OF THIS DOCUMENT This document describes the user manual to perform the installation and configuration of the Movement Sensor Device. HISTORY OF THE DOCUMENT Rev. A Author SMV Date 16/03/2022 Description User manual to install and configure Movement Sensor Device SGS - IOT COMPETENCE CENTER This document and information contained in it are confidential and are the property of Socit Gnrale de Surveillance (SGS). They may not in any way be disclosed, copied, or used by anyone except as expressly authorized by SGS. The document should always be kept in a secure place and should be destroyed or returned to SGS when it is no longer needed. Prod. #

010103 Doc. #

03 Rev A SWH - Movement Sensor Device - Installation and configuration Manual 2/(7) Date 16/03/2022 Author SMV INDEX TITLE .................................................................................................................................................................................... 1 SUMMARY........................................................................................................................................................................... 1 PURPOSE OF THIS DOCUMENT ........................................................................................................................................... 1 HISTORY OF THE DOCUMENT ............................................................................................................................................. 1 INDEX .................................................................................................................................................................................. 2 PRODUCT INTRODUCTION .......................................................................................................................................... 3 1 1.1 MAIN FEATURES .................................................................................................................................................... 3 1.2 LORAWAN SENSOR ................................................................................................................................................ 3 2 QUICK START GUIDE ................................................................................................................................................... 3 INSTALLATION ....................................................................................................................................................... 4 2.1 2.2 CONFIGURATION ................................................................................................................................................... 4 LORAWAN SENSOR INSTALLATION ............................................................................................................................. 4 3.1 PACKING LIST ......................................................................................................................................................... 4 LORAWAN SENSOR CONFIGURATION ........................................................................................................................ 4 4.1 DEFAULT CONFIGURATION ................................................................................................................................... 4 3 4 4.2 DOWNLINK COMMANDS TO CHANGE THE CONFIGURATION ............................................................................... 5 5 SAFETY PRECAUTIONS ................................................................................................................................................ 7 SGS - IOT COMPETENCE CENTER This document and information contained in it are confidential and are the property of Socit Gnrale de Surveillance (SGS). They may not in any way be disclosed, copied, or used by anyone except as expressly authorized by SGS. The document should always be kept in a secure place and should be destroyed or returned to SGS when it is no longer needed. Prod. #

010103 Doc. #

03 Rev A SWH - Movement Sensor Device - Installation and configuration Manual 3/(7) Date 16/03/2022 Author SMV 1 PRODUCT INTRODUCTION Movement Sensor Device is a device designed to measure parameters that detect possible movement in the grain and generates an alarm. The device consists of a board with an accelerometer that transmits data via LoRaWAN technology. The main purpose of the device is to obtain these acceleration values when the device moves. The whole device is shown in following figure:

1.1 MAIN FEATURES The Movement Sensor Device has the following features:

Compliance with LoRaWAN technology Frequency band: EU 868 / US 915 / AS 923 / AU 915 / KR 920 / IN 865 / RU 864 Replace AA batteries 1.5V/Lithium 3.0V/3.6V Environment resistance: IP65 Case dimensions: TBD. 1.2 LORAWAN SENSOR The following picture shows an overview of the movement sensor device. 1. Reed Sensor 2. Battery 2 QUICK START GUIDE The main steps are listed for quick use. Please refer to the following sections for more details. SGS - IOT COMPETENCE CENTER This document and information contained in it are confidential and are the property of Socit Gnrale de Surveillance (SGS). They may not in any way be disclosed, copied, or used by anyone except as expressly authorized by SGS. The document should always be kept in a secure place and should be destroyed or returned to SGS when it is no longer needed. Prod. #

010103 Doc. #

03 Rev A SWH - Movement Sensor Device - Installation and configuration Manual 4/(7) Date 16/03/2022 Author SMV 2.1 INSTALLATION To carry out the installation of the device, perform the following steps. 1. Checklist Unpack the package, check the part list to ensure nothing is missing. 2. Activate the device By default, the device is deactivated. To activate it, pass the magnet for 3 seconds in the reed area (one beep per second will be generated). When it is connected to the LoRa gateway, the device will emit a long beep and will send the first frame. 3. Check the device is connected and sending data You can check the status of the device by passing the magnet for one second, after that:

If it beeps 3 times, it will indicate that it is working and will send a frame. If it beeps 5 times, it is deactivated. 2.2 CONFIGURATION The device is already configured so it is not need it to carry out the configuration. 3 LORAWAN SENSOR INSTALLATION In this section, the installation process of the device is explained. Before installing, please check the part list to ensure nothing is missing. 3.1 PACKING LIST a. Case 1 b. Case 2 c. Magnet 4 LORAWAN SENSOR CONFIGURATION In this section, the configuration of the device is explained. 4.1 DEFAULT CONFIGURATION By default, the device is deactivated. To activate it, pass the magnet for 3 seconds in the reed area (one beep per second will be generated). When it is connected to the LoRa gateway, the device will emit a long beep and will send the first frame. From that moment on, the device will only send data in the following situations:

another one when it finishes moving within a 5 second window. To deactivate the device, the magnet must be passed for 5 seconds, after this, the device will send a deactivation frame and will go to sleep. If the time set to perform a keep alive arrives, indicating that the device is still working. If the magnet is passed over the reed for 3 consecutive seconds. If the device moves and the accelerometer alarm is triggered, sending a message when it starts to move and SGS - IOT COMPETENCE CENTER This document and information contained in it are confidential and are the property of Socit Gnrale de Surveillance (SGS). They may not in any way be disclosed, copied, or used by anyone except as expressly authorized by SGS. The document should always be kept in a secure place and should be destroyed or returned to SGS when it is no longer needed. Prod. #

010103 Doc. #

03 Rev A SWH - Movement Sensor Device - Installation and configuration Manual 5/(7) Date 16/03/2022 Author SMV 4.2 DOWNLINK COMMANDS TO CHANGE THE CONFIGURATION It is possible to change the configuration of the device through the LoRa gateway via downlink frames. You can check if the downlink has been correctly sent because the led will light up blue. The following are the different payloads for the GCM v3 device:

1. Time Update (Little Endian) To change the date and time of the device send a 4 byte frame with desired value in UNIX Timestamp on Port 4. Example:

Fri Oct 15 2021 06:45:14 GMT+0000 1634280314 6169237A 7A 23 69 61 2. Change transmission windows (Little endian) To change the times at which the device sends data send a 2 byte frame with desired value in minutes (UTC Time) on Port 5. Example:

Sending at 00:00 / 12:00 0 / 720 (Minutes) 0 / 2D0 (Big Endian) 00 00 / D0 02 (Little Endian) 3. Change region To change the region in which the device must operate, send 1 byte on Port 6. REGION_AS923 00 REGION_AU915 01 REGION_EU868 05 REGION_KR920 06 REGION_IN865 07 REGION_US915 08 REGION_RU864 09 4. Change keys To modify ABP or OTAA keys send 1 byte with activation mode 01 or 02 respectively and then 16+16 bytes according to the table on Port 7. 5. Change JoinEUI To modify JoinEUI send 8 bytes with the new value on Port 8. SGS - IOT COMPETENCE CENTER This document and information contained in it are confidential and are the property of Socit Gnrale de Surveillance (SGS). They may not in any way be disclosed, copied, or used by anyone except as expressly authorized by SGS. The document should always be kept in a secure place and should be destroyed or returned to SGS when it is no longer needed. SWH - Movement Sensor Device - Installation and configuration Manual 6/(7) Date 16/03/2022 Author SMV Prod. #

010103 Doc. #

03 Rev A 6. Change ACK To disable or enable the ACK send by the gateway screen you have to send 1 byte (00 / 01) respectively on Port 9. 7. Test To show the downlink message via UART send the x bytes on Port 10. 8. Accelerometer configuration To configure the accelerometer you have to send 4 bytes (according to the table) on Port 11. 9. Accelerometer RAW configuration To configure the registers of the accelerometer you have to send blocks of 2 bytes (according to the table) on Port 12. Example:

- Default configuration: 20 27 21 01 22 40 23 00 24 08 25 00 30 7F 32 1A 33 01

- ODR to 5276 Hz: 20 97 21 01 22 40 23 00 24 08 25 00 30 7F 32 1A 33 01 SGS - IOT COMPETENCE CENTER This document and information contained in it are confidential and are the property of Socit Gnrale de Surveillance (SGS). They may not in any way be disclosed, copied, or used by anyone except as expressly authorized by SGS. The document should always be kept in a secure place and should be destroyed or returned to SGS when it is no longer needed. Prod. #

010103 Doc. #

03 Rev A SWH - Movement Sensor Device - Installation and configuration Manual 7/(7) Date 16/03/2022 Author SMV 5 SAFETY PRECAUTIONS Follow the next safety instructions:

Never submerge the device in any liquid. Keep the device in a dry place and away from any liquids that might spill. Do not let the electronic parts come into contact with any steel elements, to avoid injuries and burns. The gateway must not be modeled in any way. Do not place the gateway where the temperature is below/above operating range. Do not place the gateway close to objects with naked flames, heat source (oven or sunlight), cold source, liquid and extreme temperature changes. Do not power on the gateway or connect it to another electrical device when installing. Check lightning and water protection when used outdoors. Do not connect or power the equipment using cables that have been damaged. Do not clean the gateway with detergents or solvents such as benzene or alcohol. To clean the device, wipe with a soft moistened cloth. Use another soft, dry cloth to wipe dry. FCC Information:

Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment This device complies with Part 15 of the FCC Rules. Its operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. SGS - IOT COMPETENCE CENTER This document and information contained in it are confidential and are the property of Socit Gnrale de Surveillance (SGS). They may not in any way be disclosed, copied, or used by anyone except as expressly authorized by SGS. The document should always be kept in a secure place and should be destroyed or returned to SGS when it is no longer needed.

Model: Movement Sensor Device v1.0 Serial Number: 102-0903-022-000005 LORA 00-80-E1-15-00-16-93-11 FCC ID: 2A229MSDTST Power Supply: Battery 3.6 Vdc 4 FCC Information This device complies subject to the fi

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation he FCC Rules, Its operation is

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name SGS ACTIVOS S.L. Address Grantee Code FCC ID Trespaderne, 29, 28042 Madrid, Madrid, Spain 2A229 2A229MSDTST Authorized Contact Name ALEKSANDAR MITREVSKI Contact Email Contact Phone aleksandar.mitrevski@sgs.com

+34679039748 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

a) b) c) d) e) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

(1)

(2)

(3) labeling the equipment with the exact FCC ID as specified in this application, compliance statement labeling pursuant to the applicable rules, compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Date:25/05/2022 Print Name:

Aleksandar Mitrevski Title:

IoT Project Delivery Manager

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID 2A229MSDTST To whom it may concern:

Date: 25/05/2022 We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with SGS Activos S.L. This authorization is valid until further written notice from the applicant. Name (Printed): Aleksandar Mitrevsi Title: IoT Project Delivery Manager Signature:

On behalf of Company: SGS ACTIVOS S.L. Telephone: +34 687 20 71 92

To:

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: SGS Activos S.L. Trespaderne, 29, 28042 Madrid, Madrid, Spain Confidentiality Request regarding application for FCC ID 2A229MSDTST Regarding:

LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature:

Printed Name (on file with the FCC associated with the Grantee Code): Aleksandar Mitrevski Title: IoT Project Delivery Manager Company Name: SGS Activos S.L.