all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
user manual | Users Manual | 179.54 KiB | ||||
1 2 3 | Internal Photos | |||||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Attestation Statements | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | External Photos | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 |
|
Test Report 2G+3G | Test Report | 2.01 MiB | ||||
1 2 3 |
|
Test Report 4G | Test Report | 503.69 KiB | ||||
1 2 3 |
|
Test Setup Photos PCB | Test Setup Photos | 406.72 KiB | ||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Setup Photos |
1 2 3 | user manual | Users Manual | 179.54 KiB |
Ind dustrial T uick entr Qu Tablet P ry manu PC ual o of comp ponent atically tensity htness e automa ent light in screen brig before e it. erence n and e slight object, ect as his manual b ease read th Ple and reserve his product using t Th is for refe his manual the specif function fic ay have the ct picture ma e physical o nce with the take the m material obj ndard. only, produc differen please the sta uction Introdu on functio hotosensitive Ph de etect ambie an nd adjust s ac ccordingly. Vo olume key enu key Me ap pplications ba ackground. when turne Po ower key utton long c ou press bu yo e short clic tur rned on; th xtinguish the e screen an ex ll. ccept the cal ac when Ho ome key&F Fingerprint an n application n is running g, click the enable e t thi key is to in to pplication ap t run n the ba ackground. Fingerprint t has unction, ntification fu ngerprint ide fin nlock. ins stead of pas ssword to un Sc canning key after unlo ocking, start y to quickly s ess this key pre 3 adjusting vo you can running in n ed off, can be ck can nd still olume. view the W Welcome to P PC o the indust trial Tablet anual will sh and jacke how you how w n et extensio This ma it t to use f function. S Standard co onfiguratio n Model Tablet Charger Centre USB line Manual Card slot Unit One One One One One One mponent in ntroduction T Tablets com mp 2. Pilot lam ot 4. Card slo gerprintop ptional rt 7. USB por uts key e 15. Flash lamp peaker rging area erface region eaker S antenna int ptional terface adset jack ont camera me key+Fing nu key urn key anning key hoto shortcu olume key ower key hotosensitiv ear camera canner ottom loudsp Wireless char xtended inte F induction pper loudsp xternal GPS 8, 22 are op 1. Hea 3. Fro 5. Hom 6.Men 8.Retu 9. Sca 10. Ph 11. Vo 12. Po 13. Ph 14. Re 16. Sc 17. Bo 18. W 19. Ex 20. HF 21. Up 22. Ex
*16, 1 1 2 t the built-in s Photo shortc P t time the key Combin and Vo key at time to g scanning fun cut key: pres y to start tak nation of lume key: p the same t get screens nction. ssing long ing photos. Power ke pressing tw time for lon hot. y o g n of Ja cket part s code scanne er rd slot ransceiver nsmitter I Introduction
(
(Optional) 1 1.1D/2Dbarc 2 2. Smart car 3 3. Infrared tr 4 4. Laser tran I Introduction
(
(Optional) 1D/2D s installs applicat gh the ode throug th he bar co canner. sc e tablet S Smart card s slot: after th ponding corresp e the in nstalls t software, a application through in nserting the e smart ca ard, the ritten. read and wr ca ard can be r ver:
cal transceiv In nfrared optic af after the te rminal is in nstalled ponding corresp w the with data a application, laser co ommunicati ized by p positioning c la aser. trans L Laser te erminal is orrespondin co co ommunicati p positioning c la aser. smitter: aft installed w ng applicatio on and can be reali er the with the on, data laser ized by and on can be reali n of Jacke et function s ter the table scanner: aft et co orrespondin g d e, it can rea tion software the 4 5 against in a Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable harmful protection interference residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance the instructions, may cause harmful radio interference communications. However, there that interference will not occur in a particular this equipment does cause harmful interference or television reception, which can be determined by turning the is no guarantee installation. radio with to to If 8 FCCRFExposureInformationand Statement Common Faults and Solutions 1. System hints can not applications Confirm whether it matches the install system Check memory capacity and do proper cleaning. to receive SMS and 2. Unable phone calls Close the call and SMS interception function Restart or restore factory settings 3. Unable to identify SIM card. Wipe the SIM card sheet metal with an eraser. Reinstall SIM card Replacement of new cards 4. Tablet crash Long press the power button for more than 10 seconds, after the screen is black, then press the 6 the separation the equipment and equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate receiving antenna. Increase the between receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult experienced technician for help. the dealer or an radio/TV power button for more than 4 seconds 5. Charging failure Confirm the connection status. When the battery is low, it does not display charging state. After charging ten minutes, please disconnect the charger first and the charger, the battery will be recharged. reinsert then for Be careful No disassembling equipment to prevent damage to equipment. Support standard Nano card. Cutting the card privately may damage the card or even damage the equipment. 7 9 not and viewed contain periodic This device meets the government's requirements forexposure to radio waves. The guidelines are based onstandards that were developed by scientificorganizations independent through thorough evaluation of scientific studies. The standards include a substantial safety margindesignedtoassurethesafetyof allpersonsregardlessofageorhealth. TheSARlimitofUSA(FCC)is1.6W/kg averaged.Device types: Industrial PDA
(FCC ID: 2ASDXS917) hasalso been tested against this SAR limit. SAR informationonthisandotherpadcan be on line at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search. This device was tested simulationtypical 0mm to body. To maintain compliance with FCC RF exposurerequirements,theuseofbelt clips, holsters and similar accessories should metallic componentsinitsassembly;theuseof accessories that do not satisfy these requirementsmaynotcomplywithFCC RFexposurerequirements,andshould beavoided. This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowingtwoconditions:
(1)Thisdevicemaynotcauseharmful interference,and(2)thisdevicemust acceptanyinterferencereceived, includinginterferencethatmaycause undesiredoperation. Anychangesormodificationstothis unitnotexpresslyapprovedbythe partyresponsibleforcompliancecould voidtheuser'sauthoritytooperatethe equipment.
1 2 3 | Test Report 2G+3G | Test Report | 2.01 MiB |
Model: S917 FCC Part 22H & 24E Measurement and Test Report For Shandong Senter Electronic Co., Ltd. No.18 Liuyishan Rd, New & Hi-Tech Area, Zibo, Shandong, China FCC ID: 2ASDXS917 FCC Rules:
FCC Part 22H, FCC Part 24E Product Description:
Industrial PDA Tested Model:
S917 Report No.:
STR18098197I-1 Sample Receipt Date:
2018-09-14 Tested Date:
2018-09-14 to 2019-01-07 Issued Date:
Tested By:
Reviewed By:
2019-01-07 Jason Su / Engineer Silin Chen / EMC Manager Approved & Authorized By:
Jandy So / PSQ Manager Prepared By:
Shenzhen SEM Test Technology Co., Ltd. Bao'an District, Shenzhen, P.R.C.518101 1/F, Building A, Hongwei Industrial Park, Liuxian 2nd Road, Tel.: +86-755-33663308 Fax.: +86-755-33663309 Website: www.semtest.com.cn Note: This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen SEM Test Technology Co., Ltd. Report No.: STR18098197I-1 Page 1 of 85 FCC Part 22H&24E Model: S917 TABLE OF CONTENTS 1. GENERAL INFORMATION ................................................................................................................................... 3 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ............................................................................... 3 1.2 TEST STANDARDS ................................................................................................................................................... 5 1.3 TEST METHODOLOGY ............................................................................................................................................. 5 1.4 TEST FACILITY ....................................................................................................................................................... 5 1.5 EUT SETUP AND TEST MODE ................................................................................................................................. 6 1.6 MEASUREMENT UNCERTAINTY .............................................................................................................................. 7 1.7 TEST EQUIPMENT LIST AND DETAILS ..................................................................................................................... 8 2. SUMMARY OF TEST RESULTS ......................................................................................................................... 10 3. RF EXPOSURE ....................................................................................................................................................... 11 3.1 STANDARD APPLICABLE ....................................................................................................................................... 11 3.2 TEST RESULT........................................................................................................................................................ 11 4. RF OUTPUT POWER ............................................................................................................................................ 12 4.1 STANDARD APPLICABLE ....................................................................................................................................... 12 4.2 TEST PROCEDURE ................................................................................................................................................. 12 4.3 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 12 5. PEAK-TO-AVERAGE RATIO (PAR) OF TRANSMITTER ............................................................................. 17 5.1 STANDARD APPLICABLE ....................................................................................................................................... 17 5.2 TEST PROCEDURE ................................................................................................................................................. 17 5.3 SUMMARY OF TEST RESULTS ............................................................................................................................... 17 6. EMISSION BANDWIDTH ..................................................................................................................................... 19 6.1 STANDARD APPLICABLE ....................................................................................................................................... 19 6.2 TEST PROCEDURE ................................................................................................................................................. 19 6.3 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 19 7. OUT OF BAND EMISSIONS AT ANTENNA TERMINAL ............................................................................... 34 7.1 STANDARD APPLICABLE ....................................................................................................................................... 34 7.2 TEST PROCEDURE ................................................................................................................................................. 34 7.3 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 34 8. SPURIOUS RADIATED EMISSIONS .................................................................................................................. 67 8.1 STANDARD APPLICABLE ....................................................................................................................................... 67 8.2 TEST PROCEDURE ................................................................................................................................................. 67 8.3 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 67 9. FREQUENCY STABILITY ................................................................................................................................... 78 9.1 STANDARD APPLICABLE ....................................................................................................................................... 78 9.2 TEST PROCEDURE ................................................................................................................................................. 78 9.3 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 78 10. MODULATION CHARACTERISTICS ............................................................................................................. 82 10.1 STANDARD APPLICABLE ..................................................................................................................................... 82 10.2 TEST PROCEDURE ............................................................................................................................................... 82 10.3 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................. 82 Report No.: STR18098197I-1 Page 2 of 85 FCC Part 22H&24E Model: S917 1. GENERAL INFORMATION 1.1 Product Description for Equipment Under Test (EUT) Client Information Applicant:
Shandong Senter Electronic Co., Ltd. Address of applicant:
No.18 Liuyishan Rd, New & Hi-Tech Area, Zibo, Shandong, China Manufacturer:
Shandong Senter Electronic Co., Ltd. Address of manufacturer:
No.18 Liuyishan Rd, New & Hi-Tech Area, Zibo, Shandong, General Description of EUT:
Product Name:
Brand Name:
Model No.:
Adding Model(s):
Rated Voltage:
Battery:
Adapter Model:
Software Version:
Hardware Version:
China Industrial PDA
/
S917 S917 V2, S917 V3, S917 V4, S917 V5, S917 V6, S917 V7, S917 V8, S917 V9 DC3.8V
/
Model: A138A-120150U-US2 Input:AC100-240V 50/60Hz,0.5A Output:DC5V2.5A/9V2A/12V1.5A
/
/
Note: The test data is gathered from a production sample, provided by the manufacturer. The appearance of others models listed in the report is different from main-test model S917, but the circuit and the electronic construction do not change, declared by the manufacturer. Report No.: STR18098197I-1 Page 3 of 85 FCC Part 22H&24E Model: S917 Technical Characteristics of EUT:
2G Support Networks:
Support Band:
Uplink Frequency:
Downlink Frequency:
Max RF Output Power:
Type of Emission:
Type of Modulation:
Type of Antenna:
Antenna Gain:
GSM, GPRS, EDGE GSM850/PCS1900 GSM/GPRS/EDGE 850: 824~849MHz GSM/GPRS/EDGE 1900: 1850~1910MHz GSM/GPRS/EDGE 850: 869~894MHz GSM/GPRS/EDGE 1900: 1930~1990MHz GSM850: 32.08dBm, GSM1900: 29.33dBm EDGE850: 26.53dBm, EDGE1900: 25.68dBm GSM850: 247KGXW, GSM1900: 249KGXW EDGE850: 246KG7W, EDGE1900: 245KG7W GMSK, 8PSK Integral Antenna GSM850: -1dBi; GSM1900: -1dBi GPRS/EDGE Class:
Class 12 3G Support Networks:
Support Band:
Uplink Frequency:
Downlink Frequency:
RF Output Power:
Type of Emission:
Type of Modulation:
Antenna Type:
Antenna Gain:
WCDMA, HSDPA, HSUPA WCDMA Band 2, WCDMA Band 5 WCDMA Band 2: 1850~1910MHz WCDMA Band 5: 824~849MHz WCDMA Band 2: 1930~1990MHz WCDMA Band 5: 869~894MHz WCDMA Band 2: 23.48dBm, WCDMA Band 5: 23.02dBm WCDMA Band 2: 4M16F9W WCDMA Band 5: 4M15F9W BPSK,QPSK Integral Antenna WCDMA Band 2: -1dBi, WCDMA Band 5: -1dBi Report No.: STR18098197I-1 Page 4 of 85 FCC Part 22H&24E Model: S917 1.2 Test Standards The tests were performed according to following standards:
FCC Rules Part 2: FREQUENCY ALLOCA-TIONS AND RADIO TREATY MAT-TERS; GENERAL RULES AND REG-ULATIONS FCC Rules Part 22: PRIVATE LAND MOBILE RADIO SERVICES. FCC Rules Part 24: PUBLIC MOBILE SERVICES TIA/EIA 603 E March 2016: Land Mobile FM or PM Communications Equipment Measurement and Performance Standards. ANSI C63.26-2015: American National Standard for Compliance Testing of Transmitters Used in Licensed Radio Services KDB 971168 D01 Power Meas License Digital Systems v03r01: MEASUREMENT GUIDANCE FOR CERTIFICATION OF LICENSED DIGITAL TRANSMITTERS Maintenance of compliance is the responsibility of the manufacturer. Any modification of the product, which result in lowering the emission, should be checked to ensure compliance has been maintained. 1.3 Test Methodology All measurements contained in this report were conducted with TIA/EIA 603 E/ KDB 971168/ ANSI C63.26 The equipment under test (EUT) was configured to measure its highest possible emission level. The test modes were adapted accordingly in reference to the Operating Instructions. 1.4 Test Facility FCC Registration No.: 125990 Shenzhen SEM Test Technology Co., Ltd. Laboratory has been recognized to perform compliance testing on equipment subject to the Commissions Declaration Of Conformity (DOC). The Designation Number is CN5010, and Test Firm Registration Number is 125990. Industry Canada (IC) Registration No.: 11464A The 3m Semi-anechoic chamber of Shenzhen SEM Test Technology Co., Ltd. has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 11464A. Report No.: STR18098197I-1 Page 5 of 85 FCC Part 22H&24E Model: S917 1.5 EUT Setup and Test Mode The EUT was operated in the engineering mode to fix the Tx frequency that was for the purpose of the measurements. All testing shall be performed under maximum output power condition, and to measure its highest possible emissions level, more detailed description as follows:
Test Mode List Test Mode TM1 TM2 TM3 TM4 TM5 TM6 TM7 TM8 TM9 TM10 TM11 TM12 Testing Configure Description GSM 850 GPRS 850 EDGE 850 GSM 1900 GPRS 1900 EDGE 1900 WCDMA Band 5 HSDPA Band 5 HSUPA Band 5 WCDMA Band 2 HSDPA Band 2 HSUPA Band 2 Remark Low, Middle, High Channels Low, Middle, High Channels Low, Middle, High Channels Low, Middle, High Channels Low, Middle, High Channels Low, Middle, High Channels Low, Middle, High Channels Low, Middle, High Channels Low, Middle, High Channels Low, Middle, High Channels Low, Middle, High Channels Low, Middle, High Channels Support Band Support Standard Channel Frequency(MHz) Channel Number GSM 850 GSM/GPRS/EDGE PCS 1900 GSM/GPRS/EDGE WCDMA Band 5 WCDMA/HSDPA/HSUPA WCDMA Band 2 WCDMA/HSDPA/HSUPA 824.2 836.6 848.8 1850.2 1880.0 1909.8 826.4 836.6 846.6 1852.4 1880.0 1907.6 128 190 251 512 661 810 4132 4183 4233 9262 9400 9538 Note: the transmitter has been tested on the communications mode of GSM, GPRS, EDGE, WCDMA, HSDPA, HSUPA compliance test and record the worst case. Test Conditions Temperature:
Relative humidity ATM Pressure:
22~25 C 50~55 %. 1019 mbar Report No.: STR18098197I-1 Page 6 of 85 FCC Part 22H&24E Model: S917 EUT Cable List and Details Cable Description Length (m) Shielded/Unshielded With / Without Ferrite USB Cable 1.5 Shielded Without Ferrite Special Cable List and Details Cable Description Length (m) Shielded/Unshielded With / Without Ferrite Earphone Cable 1.0 Unshielded Without Ferrite Auxiliary Equipment List and Details Description Manufacturer
/
/
Model
/
Serial Number
/
1.6 Measurement Uncertainty Measurement uncertainty Parameter RF Output Power Occupied Bandwidth Frequency Stability Transmitter Spurious Emissions Conditions Conducted Conducted Conducted Conducted Transmitter Spurious Emissions Radiated Uncertainty 0.42dB 1.5%
2.3%
0.42dB 30-200MHz 4.52dB 0.2-1GHz 5.56dB 1-6GHz 3.84dB 6-18GHz 3.92dB Report No.: STR18098197I-1 Page 7 of 85 FCC Part 22H&24E Communication Rohde &
SEMT-1075 Tester Schwarz Rohde &
Schwarz SEMT-1063 GSM Tester SEMT-1072 SEMT-1079 SEMT-1080 Spectrum Analyzer Spectrum Analyzer Signal Generator SEMT-1081 Vector Signal Generator SEMT-1031 SEMT-1007 Spectrum Analyzer EMI Test Receiver SEMT-1008 Amplifier SEMT-1043 Amplifier Rohde &
Schwarz Rohde &
Schwarz Agilent C&D Model: S917 1.7 Test Equipment List and Details No. Description Manufacturer Model Serial No. Cal Date Due. Date CMW500 148650 2018-05-22 2019-05-21 CMU200 114403 2018-05-22 2019-05-21 Agilent E4407B MY41440400 2018-05-22 2019-05-21 Agilent N9020A US47140102 2018-05-22 2019-05-21 Agilent 83752A 3610A01453 2018-05-22 2019-05-21 Agilent N5182A MY47070202 2018-05-22 2019-05-21 SEMT-1028 Power Divider Weinschel 1506A PM204 2018-05-22 2019-05-21 SEMT-1082 Power Divider RF-Lambda RFLT4W5M18G 14110400027 2018-05-22 2019-05-21 FSP30 836079/035 2018-05-22 2019-05-21 ESVB 8447F PAP-1G18 825471/005 2018-05-22 2019-05-21 3113A06717 2018-05-22 2019-05-21 2002 9773 2018-05-22 2019-05-21 2017-06-08 2020-06-07 SEMT-1069 Loop Antenna Schwarz beck FMZB 1516 SEMT-1068 Broadband Antenna Schwarz beck VULB9163 9163-333 2017-06-08 2020-06-07 SEMT-1042 Horn Antenna ETS 3117 00086197 2017-06-08 2020-06-07 SEMT-1121 Horn Antenna Schwarzbeck BBHA 9170 BBHA9170582 2017-06-08 2020-06-07 SEMT-1168 Pre-amplifier SEMT-1169 Pre-amplifier Spectrum Analyzer SEMT-1163 SEMT-1170 Direction Systems Inc. Direction Systems Inc. Rohde &
Schwarz DRG Horn A.H. Antenna SYSTEMS PAP-0126 14141-12838 2018-05-22 2019-05-21 PAP-2640 14145-14153 2018-05-22 2019-05-21 FSP40 100612 2018-05-22 2019-05-21 SAS-574 571 2018-03-19 2021-03-18 N9356B MY45450376 2018-05-22 2019-05-21 SEMT-1166 Power Limiter SEMT-1048 RF Limiter Agilent ATTEN AT-BSF-2400~2500 SEMT-1076 RF Switcher Top Precision RCS03-A2 SEMT-C001 SEMT-C002 SEMT-C003 SEMT-C004 Cable Cable Cable Cable Zheng DI LL142-07-07-10M(A) Zheng DI ZT40-2.92J-2.92J-6M Zheng DI ZT40-2.92J-2.92J-2.5M Zheng DI 2M0RFC
/
/
/
/
/
/
2018-05-22 2019-05-21 2018-05-22 2019-05-21 2018-03-19 2019-03-18 2018-03-19 2019-03-18 2018-03-19 2019-03-18 2018-03-19 2019-03-18 Report No.: STR18098197I-1 Page 8 of 85 FCC Part 22H&24E Model: S917 SEMT-C005 SEMT-C006 Cable Cable Zheng DI Zheng DI 1M0RFC 1M0RFC
/
/
2018-03-19 2019-03-18 2018-03-19 2019-03-18 Report No.: STR18098197I-1 Page 9 of 85 FCC Part 22H&24E Model: S917 2. SUMMARY OF TEST RESULTS FCC Rules 1.1307, 2.1093 22.913 (a), 24.232 (c) Description of Test Item RF Exposure RF Output Power Result Compliant Compliant 24.51 Peak-to-average Ratio (PAR) of Transmitter Compliant 22.917 (b), 24.238 (b) 22.917 (a), 24.238 (a) 22.917 (a), 24.238 (a) 22.917 (a), 24.238 (a) 22.355, 24.235 Emission Bandwidth Spurious Emissions at Antenna Terminal Spurious Radiation Emissions Out of Band Emissions Frequency Stability Compliant Compliant Compliant Compliant Compliant Report No.: STR18098197I-1 Page 10 of 85 FCC Part 22H&24E Model: S917 3. RF Exposure 3.1 Standard Applicable According to1.1307 and 2.1093, the portable transmitter must comply the RF exposure requirements. 3.2 Test Result This product complied with the requirement of the RF exposure, please see the SAR report. Report No.: STR18098197I-1 Page 11 of 85 FCC Part 22H&24E Model: S917 4. RF Output Power 4.1 Standard Applicable According to 22.913(a)(2), The ERP of mobile and portable stations transmitters and auxiliary test transmitters must not exceed 7 Watts. According to 24.232 (c), Mobile and portable stations are limited to 2 watts EIRP and the equipment must employ a means for limiting power to the minimum necessary for successful communications. 4.2 Test Procedure Conducted output power test method:
Radiated power test method:
1. The setup of EUT is according with per ANSI/TIA Standard 603E and ANSI C63.26 measurement procedure. 2. The measurement antenna was placed at a distance of 3 meters from the EUT. During the tests, the antenna height and polarization as well as EUT azimuth were varied in order to identify the maximum level of emissions from the EUT. The test was performed by placing the EUT on 3-orthogonal axis. 3. The frequency range up to tenth harmonic of the fundamental frequency was investigated. 4. Remove the EUT and replace it with substitution antenna. A signal generator was connected to the substitution antenna by a non-radiating cable. The absolute levels of the spurious emissions were measured by the substitution. 4.3 Summary of Test Results/Plots Report No.: STR18098197I-1 Page 12 of 85 FCC Part 22H&24E Model: S917 Max. Radiated Power Mode Channel Antenna Polar ERP (dBm) Limit (dBm) Result 128 GSM850 190 251 128 GPRS850 190 251 128 EGPRS850 190 251 V H V H V H V H V H V H V H V H V H 30.05 30.18 30.65 30.17 30.41 30.65 30.22 30.47 30.41 30.89 29.21 29.36 24.32 24.15 24.35 24.19 24.38 24.08
<38.45 Pass
<38.45 Pass
<38.45 Pass Report No.: STR18098197I-1 Page 13 of 85 FCC Part 22H&24E Model: S917 Mode Channel Antenna Polar EIRP (dBm) Limit (dBm) Result 512 PCS1900 661 810 512 GPRS1900 661 810 512 EGPRS1900 661 810 V H V H V H V H V H V H V H V H V H 28.32 28.53 28.12 28.54 28.39 28.15 28.31 28.45 28.39 28.14 28.36 28.58 23.65 23.48 23.85 23.30 23.05 23.41
<33.00 Pass
<33.00 Pass
<33.00 Pass Mode Channel Antenna Polar ERP Limit (dBm) Result V H V H V H 21.02 21.34 22.21 22.19 21.02 21.18
<38.45 Pass 4132 WCDMA Band V 4183 4233 Report No.: STR18098197I-1 Page 14 of 85 FCC Part 22H&24E Model: S917 Mode Channel Antenna Polar 9262 WCDMA Band II 9400 9538 V H V H V H EIRP 21.78 21.63 21.98 21.65 21.36 21.16 Limit (dBm) Result
<33.00 Pass Note: Pre-scan mode WCDMA/HSDPA/HSUPA find the worst case at WCDMA mode and recorded in the test report. Report No.: STR18098197I-1 Page 15 of 85 FCC Part 22H&24E Model: S917 Max. Conducted Power (Average power) Conducted Average power (dBm) Band GSM850 PCS1900 Channel 128 190 251 512 661 810 Frequency(MHz) 824.20 836.60 848.80 1850.20 1880.00 1909.80 GSM 31.97 32.05 31.92 29.21 29.33 29.09 GPRS(1Slot) 31.99 32.08 31.94 29.11 29.23 29.17 EGPRS(1Slot) 26.41 26.51 26.53 25.54 25.61 25.68 Conducted Average power (dBm) Band WCDMA Band V WCDMA Band II Channel 4132 4183 4233 9262 9400 9538 Frequency(MHz) 826.4 836.6 846.6 1852.4 1880.0 1907.6 RMC 12.2k 22.97 23.02 23.01 23.37 23.48 23.41 HSDPA Subtest-1 22.02 21.95 21.99 22.32 22.33 22.40 HSDPA Subtest-2 22.00 21.93 21.96 22.28 22.31 22.38 HSDPA Subtest-3 21.98 21.92 21.97 22.29 22.31 22.37 HSDPA Subtest-4 21.97 21.93 21.96 22.27 22.31 22.37 HSUPA Subtest-1 21.43 21.50 21.46 21.83 21.93 21.86 HSUPA Subtest-2 21.42 HSUPA Subtest-3 21.41 HSUPA Subtest-4 21.41 HSUPA Subtest-5 21.41 21.48 21.48 21.47 21.47 21.43 21.45 21.43 21.45 21.8 21.82 21.81 21.82 21.91 21.92 21.91 21.91 21.85 21.85 21.84 21.84 Report No.: STR18098197I-1 Page 16 of 85 FCC Part 22H&24E Model: S917 5. Peak-to-average Ratio (PAR) of Transmitter 5.1 Standard Applicable According to 24.232(d), Power measurements for transmissions by stations authorized under this section may be made either in accordance with a Commission-approved average power technique or in compliance with paragraph (e) of this section. In both instances, equipment employed must be authorized in accordance with the provisions of 24.51. In measuring transmissions in this band using an average power technique, the peak-to-average ratio (PAR) of the transmission may not exceed 13 dB. 5.2 Test Procedure According with KDB 971168 1. The signal analyzer s CCDF measurement profile is enabled 2. Frequency = carrier center frequency 3. Measurement BW > Emission bandwidth of signal 4. The signal analyzer was set to collect one million samples to generate the CCDF curve 5. The measurement interval was set depending on the type of signal analyzed. For continuous signals (>98% duty cycle), the measurement interval was set to 1ms. For burst transmissions, the spectrum analyzer is set to use an internal RF Burst trigger that is synced with an incoming pulse and the measurement interval is set to less than the duration of the on time of one burst to ensure that energy is only captured during a time in which the transmitter is operating at maximum power Test Configuration for the emission bandwidth testing:
5.3 Summary of Test Results PCS1900 Test Mode Channel Frequency (MHz) PAR (dB) Limit (dB) GSM GPRS(1 Slot) EDGE(1 Slot) 661 661 661 1850.2 1850.2 1850.2 6.28 5.97 7.03 13 13 13 Report No.: STR18098197I-1 Page 17 of 85 FCC Part 22H&24E Model: S917 WCDMA Band II Test Mode Channel Frequency (MHz) PAR (dB) Limit (dB) WCDMA 9262 9400 9538 1852.4 1880.0 1907.6 6.97 7.54 6.23 13 13 13 Note: Only the worst case was selected to record. Report No.: STR18098197I-1 Page 18 of 85 FCC Part 22H&24E Model: S917 6. Emission Bandwidth 6.1 Standard Applicable According to 22.917(b), The emission bandwidth is defined as the width of the signal between two points, one below the carrier center frequency and one above the carrier center frequency, outside of which all emissions are attenuated at least 26 dB below the transmitter power. According to 24.238(b), The emission bandwidth is defined as the width of the signal between two points, one below the carrier center frequency and one above the carrier center frequency, outside of which all emissions are attenuated at least 26 dB below the transmitter power. 6.2 Test Procedure The RF output terminal of the transmitter was connected to the input of the spectrum analyzer via a suitable attenuation. The RBW of the spectrum analyzer was set to 10kHz for GSM mode and 100kHz for WCDMA mode, VBW shall be at least 3 times the RBW, and the 26dB bandwidth was recorded. Test Configuration for the emission bandwidth testing:
6.3 Summary of Test Results/Plots Report No.: STR18098197I-1 Page 19 of 85 FCC Part 22H&24E Model: S917 99% Occupy bandwidth
-26dB bandwidth
(kHz) 247.0276 242.0091 246.1180 246.4954 244.3141 244.2893 242.0438 246.4642 245.8028 248.7170 243.0930 248.3851 247.6688 244.0905 244.9634 244.5205 243.9940 245.2684
(kHz) 322.074 322.715 320.961 318.276 319.609 314.555 316.449 313.120 317.676 322.445 313.009 318.000 317.018 315.614 318.779 313.701 315.349 312.171 EUT Mode Channel Frequency (MHz) 824.20 836.60 848.80 824.20 836.60 848.80 824.20 836.60 848.80 1850.20 1880.00 1909.80 1850.20 1880.00 1909.80 1850.20 1880.00 1909.80 GSM 850
(GMSK) GPRS850
(GMSK,1Slot) EGPRS850
(8PSK,1Slot) PCS1900
(GMSK) GPRS1900
(GMSK,1Slot) EGPRS1900
(8PSK,1Slot) 128 190 251 128 190 251 128 190 251 512 661 810 512 661 810 512 661 810 Report No.: STR18098197I-1 Page 20 of 85 FCC Part 22H&24E Model: S917 EUT Mode Channel Frequency (MHz) WCDMA Band V HSDPA HSUPA WCDMA Band II HSDPA HSUPA 4132 4183 4233 4132 4183 4233 4132 4183 4233 9262 9400 9538 9262 9400 9538 9262 9400 9538 826.40 836.60 846.60 826.40 836.60 846.60 826.40 836.60 846.60 1852.40 1880.00 1907.60 1852.40 1880.00 1907.60 1852.40 1880.00 1907.60 99% Occupy bandwidth
-26dB bandwidth
(kHz) 4147.1 4138.2 4140.3 4145.3 4149.2 4153.5 4148.1 4153.5 4133.6 4141.0 4138.4 4159.0 4159.6 4146.1 4142.6 4150.6 4132.5 4152.2
(kHz) 4719 4738 4731 4727 4716 4730 4727 4697 4679 4724 4711 4721 4765 4713 4742 4739 4722 4676 Report No.: STR18098197I-1 Page 21 of 85 FCC Part 22H&24E Model: S917 GSM850 Low Channel Middle Channel High Channel Report No.: STR18098197I-1 Page 22 of 85 FCC Part 22H&24E Model: S917 GPRS850 Low Channel Middle Channel High Channel Report No.: STR18098197I-1 Page 23 of 85 FCC Part 22H&24E Model: S917 EGPRS850 Low Channel Middle Channel High Channel Report No.: STR18098197I-1 Page 24 of 85 FCC Part 22H&24E Model: S917 PCS1900 Low Channel Middle Channel High Channel Report No.: STR18098197I-1 Page 25 of 85 FCC Part 22H&24E Model: S917 GPRS1900 Low Channel Middle Channel High Channel Report No.: STR18098197I-1 Page 26 of 85 FCC Part 22H&24E Model: S917 EGPRS1900 Low Channel Middle Channel High Channel Report No.: STR18098197I-1 Page 27 of 85 FCC Part 22H&24E Model: S917 WCDMA Band V Low Channel Middle Channel High Channel Report No.: STR18098197I-1 Page 28 of 85 FCC Part 22H&24E Model: S917 WCDMA Band V- HSDPA Low Channel Middle Channel High Channel Report No.: STR18098197I-1 Page 29 of 85 FCC Part 22H&24E Model: S917 WCDMA Band V- HSUPA Low Channel Middle Channel High Channel Report No.: STR18098197I-1 Page 30 of 85 FCC Part 22H&24E Model: S917 WCDMA Band II Low Channel Middle Channel High Channel Report No.: STR18098197I-1 Page 31 of 85 FCC Part 22H&24E Model: S917 WCDMA Band II- HSDPA Low Channel Middle Channel High Channel Report No.: STR18098197I-1 Page 32 of 85 FCC Part 22H&24E Model: S917 WCDMA Band II- HSUPA Low Channel Middle Channel High Channel Report No.: STR18098197I-1 Page 33 of 85 FCC Part 22H&24E Model: S917 7. Out of Band Emissions at Antenna Terminal 7.1 Standard Applicable According to 22.917(a), the power of any emissions outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log(P) dB. According to 24.238(a), the power of any emissions outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log(P) dB. 7.2 Test Procedure The RF output terminal of the transmitter was connected to the input of the spectrum analyzer via a suitable attenuation. The RBW of the spectrum analyzer was set to 100kHz and 1MHz for the scan frequency from 30MHz to 1GHz and the scan frequency from 1GHz to up to 10th harmonic. Test Configuration for the out of band emissions testing:
7.3 Summary of Test Results/Plots Note: Pre-scan mode WCDMA/HSDPA/HSUPA find the worst case at WCDMA mode and recorded in the test report. Please refer to the following test plots Report No.: STR18098197I-1 Page 34 of 85 FCC Part 22H&24E Model: S917 Low Channel GSM850 Report No.: STR18098197I-1 Page 35 of 85 FCC Part 22H&24E Model: S917 Middle Channel GSM850 Report No.: STR18098197I-1 Page 36 of 85 FCC Part 22H&24E Model: S917 High Channel GSM850 Report No.: STR18098197I-1 Page 37 of 85 FCC Part 22H&24E Model: S917 GSM850 Low Band Emission High Band Emission Report No.: STR18098197I-1 Page 38 of 85 FCC Part 22H&24E Model: S917 For Cellular Band GPRS Low Channel Report No.: STR18098197I-1 Page 39 of 85 FCC Part 22H&24E Model: S917 Middle Channel GPRS850 Report No.: STR18098197I-1 Page 40 of 85 FCC Part 22H&24E Model: S917 High Channel GPRS850 Report No.: STR18098197I-1 Page 41 of 85 FCC Part 22H&24E Model: S917 Low Band Emission High Band Emission GPRS850 Report No.: STR18098197I-1 Page 42 of 85 FCC Part 22H&24E Model: S917 EGPRS850 Low Channel Report No.: STR18098197I-1 Page 43 of 85 FCC Part 22H&24E Model: S917 Middle Channel EGPRS850 Report No.: STR18098197I-1 Page 44 of 85 FCC Part 22H&24E Model: S917 High Channel EGPRS850 7 Report No.: STR18098197I-1 Page 45 of 85 FCC Part 22H&24E Model: S917 EGPRS850 Low Band Emission High Band Emission Report No.: STR18098197I-1 Page 46 of 85 FCC Part 22H&24E Model: S917 PCS1900 Low Channel Report No.: STR18098197I-1 Page 47 of 85 FCC Part 22H&24E Model: S917 PCS1900 Middle Channel Report No.: STR18098197I-1 Page 48 of 85 FCC Part 22H&24E Model: S917 PCS1900 High Channel Report No.: STR18098197I-1 Page 49 of 85 FCC Part 22H&24E Model: S917 PCS1900 Low Band Emission High Band Emission Report No.: STR18098197I-1 Page 50 of 85 FCC Part 22H&24E Model: S917 GPRS1900 Low Channel Report No.: STR18098197I-1 Page 51 of 85 FCC Part 22H&24E Model: S917 GPRS1900 Middle Channel Report No.: STR18098197I-1 Page 52 of 85 FCC Part 22H&24E Model: S917 GPRS1900 High Channel Report No.: STR18098197I-1 Page 53 of 85 FCC Part 22H&24E Model: S917 Low Band Emission High Band Emission GPRS1900 Report No.: STR18098197I-1 Page 54 of 85 FCC Part 22H&24E Model: S917 EGPRS1900 Low Channel Report No.: STR18098197I-1 Page 55 of 85 FCC Part 22H&24E Model: S917 EGPRS1900 Middle Channel Report No.: STR18098197I-1 Page 56 of 85 FCC Part 22H&24E Model: S917 EGPRS1900 High Channel Report No.: STR18098197I-1 Page 57 of 85 FCC Part 22H&24E Model: S917 EGPRS1900 Low Band Emission High Band Emission Report No.: STR18098197I-1 Page 58 of 85 FCC Part 22H&24E Model: S917 Low Channel WCDMA Band V Report No.: STR18098197I-1 Page 59 of 85 FCC Part 22H&24E Model: S917 Middle Channel WCDMA Band V Report No.: STR18098197I-1 Page 60 of 85 FCC Part 22H&24E Model: S917 High Channel WCDMA Band V Report No.: STR18098197I-1 Page 61 of 85 FCC Part 22H&24E Model: S917 WCDMA Band V Low Band Emission High Band Emission Report No.: STR18098197I-1 Page 62 of 85 FCC Part 22H&24E Model: S917 WCDMA Band II Low Channel Report No.: STR18098197I-1 Page 63 of 85 FCC Part 22H&24E Model: S917 WCDMA Band II Middle Channel Report No.: STR18098197I-1 Page 64 of 85 FCC Part 22H&24E Model: S917 WCDMA Band II High Channel Report No.: STR18098197I-1 Page 65 of 85 FCC Part 22H&24E Model: S917 WCDMA Band II Low Band Emission High Band Emission Report No.: STR18098197I-1 Page 66 of 85 FCC Part 22H&24E Model: S917 8. Spurious Radiated Emissions 8.1 Standard Applicable According to 22.917(a), the power of any emissions outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log(P) dB. According to 24.238(a), the power of any emissions outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log(P) dB. 8.2 Test Procedure 1. The setup of EUT is according with per ANSI/TIA Standard 603E and ANSI C63.26 measurement procedure. 2. The measurement antenna was placed at a distance of 3 meters from the EUT. During the tests, the antenna height and polarization as well as EUT azimuth were varied in order to identify the maximum level of emissions from the EUT. The test was performed by placing the EUT on 3-orthogonal axis. 3. The frequency range up to tenth harmonic of the fundamental frequency was investigated. 4. Remove the EUT and replace it with substitution antenna. A signal generator was connected to the substitution antenna by a non-radiating cable. The absolute levels of the spurious emissions were measured by the substitution. Spurious attenuation limit in dB =43+10 Log10 (power out in Watts) 8.3 Summary of Test Results/Plots Note: this EUT was tested in 3 orthogonal positions and the worst case position data was reported. Report No.: STR18098197I-1 Page 67 of 85 FCC Part 22H&24E Model: S917 Spurious Emissions Below 1GHz For Cellular Band Test Channel GSM850 Polarity:
Horizontal No. Frequency Reading Correct Result Limit Margin Degree Height Remark 1 2 3
(MHz)
(dBm) dB
(dBm)
(dBm)
(dB)
(
)
(cm) 54.8348 91.4949
-78.52
-79.35 381.2487
-78.68
-0.28
-1.90 4.87
-78.80
-13.00
-65.80
-81.25
-13.00
-68.25
-73.81
-13.00
-60.81 221 99 328 100 100 100 peak peak peak Report No.: STR18098197I-1 Page 68 of 85 FCC Part 22H&24E Model: S917 For Cellular Band Test Channel GSM850 Polarity:
Vertical No. Frequency Reading Correct Result Limit Margin Degree Height Remark 1 2 3
(MHz)
(dBm) dB
(dBm)
(dBm)
(dB)
(
)
(cm) 53.3179 89.9047
-78.36
-79.52 331.3547
-78.19 0.02
-1.67 4.19
-78.34
-13.00
-65.34
-81.19
-13.00
-68.19
-74.00
-13.00
-61.00 325 92 114 100 100 100 peak peak peak Report No.: STR18098197I-1 Page 69 of 85 FCC Part 22H&24E Model: S917 For Cellular Band Test Channel GSM1900 Polarity:
Horizontal No. Frequency Reading Correct Result Limit Margin Degree Height Remark 1 2 3
(MHz)
(dBm) dB
(dBm)
(dBm)
(dB)
(
)
(cm) 39.8542
-78.22 112.1305
-78.31 462.3455
-78.19
-0.92
-2.48 5.78
-79.14
-13.00
-66.14
-80.79
-13.00
-67.79
-72.41
-13.00
-59.41 313 223 57 100 100 100 peak peak peak Report No.: STR18098197I-1 Page 70 of 85 FCC Part 22H&24E Model: S917 For Cellular Band Test Channel GSM1900 Polarity:
Vertical No. Frequency Reading Correct Result Limit Margin Degree Height Remark 1 2 3
(MHz)
(dBm) dB
(dBm)
(dBm)
(dB)
(
)
(cm) 46.1780 99.5281
-78.96
-79.01 495.9344
-78.85 0.00
-2.06 6.34
-78.96
-13.00
-65.96
-81.07
-13.00
-68.07
-72.51
-13.00
-59.51 186 340 62 100 100 100 peak peak peak Note: Margin= (Reading+ Correct)- Limit Report No.: STR18098197I-1 Page 71 of 85 FCC Part 22H&24E Model: S917 Test Channel band 5 Polarity:
Horizontal No. Frequency Reading Correct Result Limit Margin Degree Height Remark 1 2 3
(MHz)
(dBm) dB
(dBm)
(dBm)
(dB)
(
)
(cm) 47.3255 90.2205
-79.42
-79.48 312.1794
-78.79 0.10
-1.64 3.51
-79.32
-13.00
-66.32
-81.12
-13.00
-68.12
-75.28
-13.00
-62.28 205 290 89 100 100 100 peak peak peak Report No.: STR18098197I-1 Page 72 of 85 FCC Part 22H&24E Model: S917 Test Channel band 5 Polarity:
Vertical No. Frequency Reading Correct Result Limit Margin Degree Height Remark 1 2 3
(MHz)
(dBm) dB
(dBm)
(dBm)
(dB)
(
)
(cm) 51.4807 88.9639
-79.38
-78.42 372.0045
-77.84 0.21
-2.41 4.48
-79.17
-13.00
-66.17
-80.83
-13.00
-67.83
-73.36
-13.00
-60.36 275 135 66 100 100 100 peak peak peak Report No.: STR18098197I-1 Page 73 of 85 FCC Part 22H&24E Model: S917 Test Channel band 2 Polarity:
Horizontal No. Frequency Reading Correct Result Limit Margin Degree Height Remark 1 2 3
(MHz)
(dBm) dB
(dBm)
(dBm)
(dB)
(
)
(cm) 52.7600
-79.32 106.7587
-79.19 344.3855
-79.70 0.11
-1.75 4.68
-79.21
-13.00
-66.21
-80.94
-13.00
-67.94
-75.02
-13.00
-62.02 248 97 124 100 100 100 peak peak peak Report No.: STR18098197I-1 Page 74 of 85 FCC Part 22H&24E Model: S917 Test Channel band 2 Polarity:
Vertical No. Frequency Reading Correct Result Limit Margin Degree Height Remark 1 2 3
(MHz)
(dBm) dB
(dBm)
(dBm)
(dB)
(
)
(cm) 45.8553
-78.69 106.0126
-79.04 261.9753
-79.12
-0.02
-1.68 2.62
-78.71
-13.00
-65.71
-80.72
-13.00
-67.72
-76.50
-13.00
-63.50 347 94 340 100 100 100 peak peak peak Note: Margin= (Reading+ Correct)- Limit Report No.: STR18098197I-1 Page 75 of 85 FCC Part 22H&24E Model: S917 Spurious Emissions Above 1GHz For Cellular Band_GSM850 Mode Frequency Reading Correct
(MHz)
(dBm) dB Result
(dBm) Limit
(dBm) Margin
(dB) Polar H/V 1648.4 2472.6 1648.4 2472.6 1673.2 2509.8 1673.2 2509.8 1697.6 2546.4 1697.6 2546.4
-37.29
-44.06
-35.1
-43.93
-37.59
-41.28
-34.13
-43.56
-35.6
-43.21
-35.67
-43.19 Low Channel (824.2MHz) 4.94 8.46 4.94 8.46
-32.35
-35.6
-30.16
-35.47 Middle Channel (836.6MHz) 5.11 8.54 5.11 8.54 5.25 8.57 5.25 8.57
-32.48
-32.74
-29.02
-35.02 High Channel (848.8MHz)
-30.35
-34.64
-30.42
-34.62
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-19.35
-22.6
-17.16
-22.47
-19.48
-19.74
-16.02
-22.02
-17.35
-21.64
-17.42
-21.62 H H V V H H V V H H V V For PCS Band_GSM1900 Mode Frequency Reading Correct
(MHz)
(dBm) dB Result
(dBm) Limit
(dBm) Margin
(dB) Polar H/V 3700.4 5550.6 3700.4 5550.6 3760.0 5640.0 3760.0 5640.0 3819.6 5729.4 3819.6 5729.4
-39.95
-47.86
-42.42
-46.85
-42.35
-48.38
-40.12
-49.46
-41.22
-46.15
-39.15
-48.83 Low Channel (1850.2MHz) 10.54 13.37 10.54 13.37
-29.41
-34.49
-31.88
-33.48 Middle Channel (1880MHz) 10.64 13.54 10.64 13.54
-31.71
-34.84
-29.48
-35.92 High Channel (1909.8MHz) 10.74 13.71 10.74 13.71
-30.48
-32.44
-28.41
-35.12
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-16.41
-21.49
-18.88
-20.48
-18.71
-21.84
-16.48
-22.92
-17.48
-19.44
-15.41
-22.12 H H V V H H V V H H V V Report No.: STR18098197I-1 Page 76 of 85 FCC Part 22H&24E Model: S917 For WCDMA Band V Mode Frequency Reading Correct
(MHz)
(dBm) dB Result
(dBm) Limit
(dBm) Margin
(dB) Polar H/V 1652.8 2479.2 1652.8 2479.2 1672.8 2509.2 1672.8 2509.2 1693.2 2539.8 1693.2 2539.8
-35.88
-41.01
-36.36
-41.68
-35.71
-42.23
-37.74
-44.73
-37.22
-44.7
-36
-44.13 For WCDMA Band II Mode Low Channel (826.4MHz) 4.94 8.46 4.94 8.46
-30.94
-32.55
-31.42
-33.22 Middle Channel (836.6MHz) 5.11 8.54 5.11 8.54 5.25 8.57 5.25 8.57
-30.6
-33.69
-32.63
-36.19 High Channel (846.6MHz)
-31.97
-36.13
-30.75
-35.56
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-17.94
-19.55
-18.42
-20.22
-17.6
-20.69
-19.63
-23.19
-18.97
-23.13
-17.75
-22.56 H H V V H H V V H H V V Frequency Reading Correct
(MHz)
(dBm) dB Result
(dBm) Limit
(dBm) Margin
(dB) Polar H/V 3704.8 5557.2 3704.8 5557.2 3760.8 5640.0 3760.8 5640.0 3815.2 5722.8 3815.2 5722.8
-41.27
-48.5
-41.45
-48.93
-40.77
-48.71
-39.9
-47.96
-41.48
-46.45
-39.03
-46.21 Low Channel (1852.4MHz) 10.17 14.69 10.17 14.69
-31.1
-33.81
-31.28
-34.24 Middle Channel (1880MHz) 10.26 14.78 10.26 14.78
-30.51
-33.93
-29.64
-33.18 High Channel (1907.6MHz) 10.59 15.03 10.59 15.03
-30.89
-31.42
-28.44
-31.18
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-18.1
-20.81
-18.28
-21.24
-17.51
-20.93
-16.64
-20.18
-17.89
-18.42
-15.44
-18.18 H H V V H H V V H H V H Note: Result=Reading+ Correct, Margin= Result- Limit Note: Testing is carried out with frequency rang 9kHz to the tenth harmonics, other than listed in the table above are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. Report No.: STR18098197I-1 Page 77 of 85 FCC Part 22H&24E Model: S917 9. Frequency Stability 9.1 Standard Applicable According to 22.355, 24.235 the limit is 2.5ppm. 9.2 Test Procedure According to 2.1055, the following test procedure was performed. The Frequency Stability is measured directly with a Frequency Domain Analyzer. Frequency Deviation in ppm is calculated from the measured peak to peak value. The Carrier Frequency Stability over Power Supply Voltage and over Temperature is measured with a Frequency Domain Analyzer in histogram mode 9.3 Summary of Test Results/Plots Note: 1. Worst case at GSM850/PCS1900/WCDMA B2/B5 middle channel 2. Normal Voltage NV=DC3.8V; Low Voltage LV=DC3.6V;High Voltage HV=DC4.35V Report No.: STR18098197I-1 Page 78 of 85 FCC Part 22H&24E Model: S917 Frequency stability V.S. Temperature measurement Reference Frequency: GSM850 Middle channel=190 channel=836.6MHz Power supplied (Vdc) Temperature (C) Limit (ppm) Result Frequency error NV
-30
-20
-10 0 10 20 30 40 50 Hz 59 50 44 39 32 28 32 40 44 ppm 0.0705 0.0598 0.0526 0.0466 0.0383 0.0335 0.0383 0.0478 0.0526 2.50 Pass Reference Frequency: PCS1900 Middle channel=661 channel=1880MHz Power supplied (Vdc) Temperature (C) Limit (ppm) Result Frequency error
-30
-20
-10 0 10 20 30 40 50 Hz 62 46 35 32 27 22 27 33 41 ppm 0.0330 0.0245 0.0186 0.0170 0.0144 0.0117 0.0144 0.0176 0.0218 2.50 Pass NV Report No.: STR18098197I-1 Page 79 of 85 FCC Part 22H&24E Model: S917 Reference Frequency: WCDMA Band V Middle channel=4183 channel=836.6MHz Power supplied (Vdc) Temperature (C) Limit (ppm) Result Frequency error NV
-30
-20
-10 0 10 20 30 40 50 Hz 52 45 42 37 33 29 36 44 52 ppm 0.0622 0.0538 0.0502 0.0442 0.0394 0.0347 0.0430 0.0526 0.0622 2.50 Pass Reference Frequency: WCDMA Band II Middle channel=9400 channel=1880MHz Power supplied (Vdc) Temperature (C) Limit (ppm) Result Frequency error
-30
-20
-10 0 10 20 30 40 50 Hz 66 62 52 45 38 30 37 41 48 ppm 0.0351 0.0330 0.0277 0.0239 0.0202 0.0160 0.0197 0.0218 0.0255 2.50 Pass NV Report No.: STR18098197I-1 Page 80 of 85 FCC Part 22H&24E Model: S917 Frequency stability V.S. Voltage measurement Reference Frequency: GSM850 (GSM link) Middle channel=190 channel=836.6MHz Temperature (C) 25 Power supplied Frequency error
(Vdc) HV NV LV Hz 40 38 34 ppm 0.0478 0.0454 0.0406 Limit (ppm) Result 2.50 Pass Reference Frequency: PCS1900 (GSM link) Middle channel=661 channel=1880MHz Temperature (C) 25 Power supplied Frequency error
(Vdc) HV NV LV Hz 47 43 46 ppm 0.0250 0.0229 0.0245 Limit (ppm) Result 2.50 Pass Reference Frequency: WCDMA Band V Middle channel=4183 channel=836.6MHz Temperature (C) 25 Power supplied Frequency error
(Vdc) HV NV LV Hz 30 34 38 ppm 0.0359 0.0406 0.0454 Limit (ppm) Result 2.50 Pass Reference Frequency: WCDMA Band II Middle channel=9400 channel=1880MHz Temperature (C) 25 Power supplied Frequency error Hz 41 35 45 ppm 0.0218 0.0186 0.0239
(Vdc) HV NV LV Limit (ppm) Result 2.50 Pass Report No.: STR18098197I-1 Page 81 of 85 FCC Part 22H&24E Model: S917 10. Modulation characteristics 10.1 Standard Applicable According to 2.1047, Measurements required: Modulation characteristics is given below:
(a) Voice modulated communication equipment. A curve or equivalent data showing the frequency response of the audio modulating circuit over a range of 100 to 5000 Hz shall be submitted. For equipment required to have an audio low-pass filter, a curve showing the frequency response of the filter, or of all circuitry installed between the modulation limiter and the modulated stage shall be submitted.
(b) Equipment which employs modulation limiting. A curve or family of curves showing the percentage of modulation versus the modulation input voltage shall be supplied. The information submitted shall be sufficient to show modulation limiting capability throughout the range of modulating frequencies and input modulating signal levels employed.
(c) Single sideband and independent sideband radiotelephone transmitters which employ a device or circuit to limit peak envelope power. A curve showing the peak envelope power output versus the modulation input voltage shall be supplied. The modulating signals shall be the same in frequency as specified in paragraph (c) of 2.1049 for the occupied bandwidth tests.
(d) Other types of equipment. A curve or equivalent data which shows that the equipment will meet the modulation requirements of the rules under which the equipment is to be licensed. 10.2 Test Procedure According to ANSI C63.26-2015 section 5.3.2, the following test setup was performed. 10.3 Summary of Test Results/Plots Only the worst case was selected to record Report No.: STR18098197I-1 Page 82 of 85 FCC Part 22H&24E Model: S917 GSM850 Middle Channel-GMSK Middle Channel-8PSK Report No.: STR18098197I-1 Page 83 of 85 FCC Part 22H&24E Model: S917 GSM1900 Middle Channel-GMSK Middle Channel-8PSK Report No.: STR18098197I-1 Page 84 of 85 FCC Part 22H&24E Model: S917 WCDMA B5 WCDMA B2
***** END OF REPORT *****
Report No.: STR18098197I-1 Page 85 of 85 FCC Part 22H&24E
1 2 3 | Test Report 4G | Test Report | 503.69 KiB |
Model: S917 FCC Part 22H & 27 Measurement and Test Report For Shandong Senter Electronic Co., Ltd. No.18 Liuyishan Rd, New & Hi-Tech Area, Zibo, Shandong, China FCC ID: 2ASDXS917 FCC Rules:
FCC Part 22H, FCC Part 27 Product Description:
Industrial PDA Tested Model:
S917 Report No.:
STR18098197I-2 Sample Receipt Date:
2018-09-14 Tested Date:
2018-09-14 to 2019-01-07 Issued Date:
Tested By:
Reviewed By:
2019-01-07 Jason Su / Engineer Silin Chen / EMC Manager Approved & Authorized By:
Jandy So / PSQ Manager Prepared By:
Shenzhen SEM Test Technology Co., Ltd. Bao'an District, Shenzhen, P.R.C.518101 1/F, Building A, Hongwei Industrial Park, Liuxian 2nd Road, Tel.: +86-755-33663308 Fax.: +86-755-33663309 Website: www.semtest.com.cn Note: This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen SEM Test Technology Co., Ltd. REPORT NO.: STR18098197I-2 PAGE 1 OF 28 FCC PART 22&27 Model: S917 TABLE OF CONTENTS 1. GENERAL INFORMATION ................................................................................................................................... 3 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ............................................................................... 3 1.2 TEST STANDARDS ................................................................................................................................................... 5 1.3 TEST METHODOLOGY ............................................................................................................................................. 5 1.4 TEST FACILITY ....................................................................................................................................................... 5 1.5 EUT SETUP AND TEST MODE ................................................................................................................................. 6 1.6 MEASUREMENT UNCERTAINTY .............................................................................................................................. 7 1.7 TEST EQUIPMENT LIST AND DETAILS ..................................................................................................................... 7 2. SUMMARY OF TEST RESULTS ........................................................................................................................... 8 3. RF EXPOSURE ......................................................................................................................................................... 9 3.1 STANDARD APPLICABLE ......................................................................................................................................... 9 3.2 TEST RESULT.......................................................................................................................................................... 9 4. RF OUTPUT POWER ............................................................................................................................................ 10 4.1 STANDARD APPLICABLE ....................................................................................................................................... 10 4.2 TEST PROCEDURE ................................................................................................................................................. 10 4.3 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 10 5. PEAK-TO-AVERAGE RATIO (PAR) OF TRANSMITTER ............................................................................. 14 5.1 STANDARD APPLICABLE ....................................................................................................................................... 14 5.2 TEST PROCEDURE ................................................................................................................................................. 14 5.3 SUMMARY OF TEST RESULTS ............................................................................................................................... 14 6. EMISSION BANDWIDTH ..................................................................................................................................... 15 6.1 STANDARD APPLICABLE ....................................................................................................................................... 15 6.2 TEST PROCEDURE ................................................................................................................................................. 15 6.3 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 15 7. OUT OF BAND EMISSIONS AT ANTENNA TERMINAL ............................................................................... 16 7.1 STANDARD APPLICABLE ....................................................................................................................................... 16 7.2 TEST PROCEDURE ................................................................................................................................................. 16 7.3 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 16 8. SPURIOUS RADIATED EMISSIONS .................................................................................................................. 17 8.1 STANDARD APPLICABLE ....................................................................................................................................... 17 8.2 TEST PROCEDURE ................................................................................................................................................. 17 8.3 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 17 9. FREQUENCY STABILITY ................................................................................................................................... 28 9.1 STANDARD APPLICABLE ....................................................................................................................................... 28 9.2 TEST PROCEDURE ................................................................................................................................................. 28 9.3 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 28 REPORT NO.: STR18098197I-2 PAGE 2 OF 28 FCC PART 22&27 Model: S917 1. GENERAL INFORMATION 1.1 Product Description for Equipment Under Test (EUT) Client Information Applicant:
Shandong Senter Electronic Co., Ltd. Address of applicant:
No.18 Liuyishan Rd, New & Hi-Tech Area, Zibo, Shandong, China Manufacturer:
Shandong Senter Electronic Co., Ltd. Address of manufacturer:
No.18 Liuyishan Rd, New & Hi-Tech Area, Zibo, Shandong, General Description of EUT:
Product Name:
Brand Name:
Model No.:
Adding Model(s):
Hardware version:
Software version:
Rated Voltage:
Adapter Model:
China Industrial PDA
/
S917 S917 V2, S917 V3, S917 V4, S917 V5, S917 V6, S917 V7, S917 V8, S917 V9
/
/
DC3.8V Model: A138A-120150U-US2 Input:AC100-240V 50/60Hz,0.5A Output:DC5V2.5A/9V2A/12V1.5A Device Category:
Portable Device Note: The test data is gathered from a production sample, provided by the manufacturer. The appearance of others models listed in the report is different from main-test model S917, but the circuit and the electronic construction do not change, declared by the manufacturer. REPORT NO.: STR18098197I-2 PAGE 3 OF 28 FCC PART 22&27 Model: S917 Technical Characteristics of EUT: Main board 4G Support Networks:
Support Band:
FDD-LTE FDD-LTE Band 5,7, TDD-LTE Band 40 FDD-LTE Band 5: Tx: 824-849MHz, Uplink Frequency:
FDD-LTE Band 7: Tx: 2500-2570MHz, Downlink Frequency:
FDD-LTE Band 7: Rx: 2620-2690MHz, TDD-LTE Band 40: Rx: 2305-2315MHz&2350-2360MHz TDD-LTE Band 40: Tx: 2305-2315MHz&2350-2360MHz FDD-LTE Band 5: Rx: 869-894MHz, RF Output Power:
Type of Emission:
Type of Modulation:
Antenna Type:
Antenna Gain:
FDD-LTE Band 5: 22.16dBm FDD-LTE Band 7: 22.77dBm TDD-LTE Band 40: 22.39dBm FDD-LTE Band 5: 8M94G7D, 8M94W7D FDD-LTE Band 7: 17M9G7D, 17M9W7D TDD-LTE Band 40: 8M93G7D, 8M94W7D QPSK, 16QAM Integral Antenna FDD-LTE Band 5: -1dBi, FDD-LTE Band 7: -1dBi, TDD-LTE Band 40: -1dBi, REPORT NO.: STR18098197I-2 PAGE 4 OF 28 FCC PART 22&27 Model: S917 1.2 Test Standards The tests were performed according to following standards:
FCC Rules Part 2: FREQUENCY ALLOCA-TIONS AND RADIO TREATY MAT-TERS; GENERAL RULES AND REG-ULATIONS FCC Rules Part 22: PRIVATE LAND MOBILE RADIO SERVICES. FCC Rules Part 27: MISCELLANEOUS WIRELESS COMMUNICATIONS SERVICES TIA/EIA 603 E March 2016: Land Mobile FM or PM Communications Equipment Measurement and Performance Standards. ANSI C63.26-2015: American National Standard for Compliance Testing of Transmitters Used in Licensed Radio Services KDB 971168 D01 Power Meas License Digital Systems v03r01: MEASUREMENT GUIDANCE FOR CERTIFICATION OF LICENSED DIGITAL TRANSMITTERS Maintenance of compliance is the responsibility of the manufacturer. Any modification of the product, which result in lowering the emission, should be checked to ensure compliance has been maintained. 1.3 Test Methodology All measurements contained in this report were conducted with TIA/EIA 603 E/ KDB 971168/ ANSI C63.26 The equipment under test (EUT) was configured to measure its highest possible emission level. The test modes were adapted accordingly in reference to the Operating Instructions. 1.4 Test Facility FCC Registration No.: 125990 Shenzhen SEM Test Technology Co., Ltd. Laboratory has been recognized to perform compliance testing on equipment subject to the Commissions Declaration Of Conformity (DOC). The Designation Number is CN5010, and Test Firm Registration Number is 125990. Industry Canada (IC) Registration No.: 11464A The 3m Semi-anechoic chamber of Shenzhen SEM Test Technology Co., Ltd. has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 11464A. REPORT NO.: STR18098197I-2 PAGE 5 OF 28 FCC PART 22&27 Model: S917 1.5 EUT Setup and Test Mode The EUT was operated in the engineering mode to fix the Tx frequency that was for the purpose of the measurements. All testing shall be performed under maximum output power condition, and to measure its highest possible emissions level, more detailed description as follows:
Test Mode List Test Mode Description Remark TM1 TM2 TM3 Test Conditions FDD-LTE Band 5 FDD-LTE Band 7 TDD-LTE Band 40 Low, Middle, High Channels Low, Middle, High Channels Low, Middle, High Channels Temperature:
Relative humidity ATM Pressure:
EUT Cable List and Details 22~25 C 50~55 %. 1019 mbar Cable Description Length (m) Shielded/Unshielded With / Without Ferrite USB Cable 1.5 Shielded Without Ferrite Special Cable List and Details Cable Description Length (m) Shielded/Unshielded With / Without Ferrite Earphone Cable 1.0 Unshielded Without Ferrite Auxiliary Equipment List and Details Description Manufacturer
/
/
Model
/
Serial Number
/
REPORT NO.: STR18098197I-2 PAGE 6 OF 28 FCC PART 22&27 Model: S917 1.6 Measurement Uncertainty Measurement uncertainty Parameter RF Output Power Occupied Bandwidth Frequency Stability Transmitter Spurious Emissions Conditions Conducted Conducted Conducted Conducted Transmitter Spurious Emissions Radiated Uncertainty 0.42dB 1.5%
2.3%
0.42dB 30-200MHz 4.52dB 0.2-1GHz 5.56dB 1-6GHz 3.84dB 6-18GHz 3.92dB 1.7 Test Equipment List and Details No. Description Manufacturer Model Serial No. Cal Date Due. Date SEMT-1075 Communication Tester Rohde & Schwarz CMW500 148650 2018-05-22 2019-05-21 SEMT-1063 GSM Tester Rohde & Schwarz CMU200 114403 2018-05-22 2019-05-21 SEMT-1072 Spectrum Analyzer SEMT-1079 Spectrum Analyzer SEMT-1080 Signal Generator SEMT-1081 Vector Signal Generator Agilent Agilent Agilent E4407B MY41440400 2018-05-22 2019-05-21 N9020A US47140102 2018-05-22 2019-05-21 83752A 3610A01453 2018-05-22 2019-05-21 Agilent N5182A MY47070202 2018-05-22 2019-05-21 SEMT-1028 Power Divider Weinschel 1506A PM204 2018-05-22 2019-05-21 SEMT-1082 Power Divider RF-Lambda RFLT4W5M18G 14110400027 2018-05-22 2019-05-21 SEMT-1031 Spectrum Analyzer Rohde & Schwarz SEMT-1007 EMI Test Receiver Rohde & Schwarz SEMT-1008 Amplifier SEMT-1043 Amplifier Agilent C&D FSP30 ESVB 8447F PAP-1G18 SEMT-1069 Loop Antenna Schwarz beck FMZB 1516 836079/035 2018-05-22 2019-05-21 825471/005 2018-05-22 2019-05-21 3113A06717 2018-05-22 2019-05-21 2002 9773 2018-05-22 2019-05-21 2017-06-08 2020-06-07 SEMT-1068 Broadband Antenna Schwarz beck VULB9163 9163-333 2017-06-08 2020-06-07 SEMT-1042 Horn Antenna ETS 3117 00086197 2017-06-08 2020-06-07 SEMT-1121 Horn Antenna Schwarzbeck BBHA 9170 BBHA9170582 2017-06-08 2020-06-07 SEMT-1168 Pre-amplifier SEMT-1169 Pre-amplifier Direction Systems Inc. Direction Systems Inc. PAP-0126 14141-12838 2018-05-22 2019-05-21 PAP-2640 14145-14153 2018-05-22 2019-05-21 SEMT-1163 Spectrum Analyzer Rohde & Schwarz FSP40 100612 2018-05-22 2019-05-21 SEMT-1170 DRG Horn Antenna A.H. SYSTEMS SAS-574 571 2018-03-19 2021-03-18 REPORT NO.: STR18098197I-2 PAGE 7 OF 28 FCC PART 22&27 Model: S917 2. SUMMARY OF TEST RESULTS FCC Rules Description of Test Item 1.1307, 2.1093 22.913 (a), , 27.50(d) 27.50 22.917 (b), 27.53 22.917 (a),27.53(h) 22.917 (a),27.53(h) 22.917 (a),27.53(h) 22.355,27.54 RF Exposure RF Output Power Peak-to-average Ratio (PAR) of Transmitter Emission Bandwidth Result Compliant Compliant Compliant Compliant Spurious Emissions at Antenna Terminal Compliant Spurious Radiation Emissions Out of Band Emissions Frequency Stability Compliant Compliant Compliant REPORT NO.: STR18098197I-2 PAGE 8 OF 28 FCC PART 22&27 Model: S917 3. RF Exposure 3.1 Standard Applicable According to1.1307 and 2.1093, the portable transmitter must comply the RF exposure requirements. 3.2 Test Result This product complied with the requirement of the RF exposure, please see the SAR report. REPORT NO.: STR18098197I-2 PAGE 9 OF 28 FCC PART 22&27 Model: S917 4. RF Output Power 4.1 Standard Applicable According to 27.50(d)(4), Fixed, mobile, and portable (hand-held) stations operating in the 1710-1755 MHz band and mobile and portable stations operating in the 1695-1710 MHz and 1755-1780 MHz bands are limited to 1 watt EIRP. According to 27.50(c)(10), Portable stations (hand-held devices) in the 698-746 MHz band are limited to 3 watts ERP. 4.2 Test Procedure Conducted output power test method:
Radiated power test method:
1. The setup of EUT is according with per ANSI/TIA Standard 603E and ANSI C63.26 measurement procedure. 2. The measurement antenna was placed at a distance of 3 meters from the EUT. During the tests, the antenna height and polarization as well as EUT azimuth were varied in order to identify the maximum level of emissions from the EUT. The test was performed by placing the EUT on 3-orthogonal axis. 3. The frequency range up to tenth harmonic of the fundamental frequency was investigated. 4. Remove the EUT and replace it with substitution antenna. A signal generator was connected to the substitution antenna by a non-radiating cable. The absolute levels of the spurious emissions were measured by the substitution. 4.3 Summary of Test Results/Plots REPORT NO.: STR18098197I-2 PAGE 10 OF 28 FCC PART 22&27 Model: S917 Max. Radiated Power:
FDD-LTE Band 5 Modulation Channel E.r.p [dBm]
Channel Bandwidth: 1.4 MHz QPSK 16QAM LCH MCH HCH LCH MCH HCH 21.02 21.11 21.17 21.62 21.05 20.98 Modulation Channel E.r.p [dBm]
Channel Bandwidth: 3 MHz QPSK 16QAM LCH MCH HCH LCH MCH HCH 21.61 21.14 21.09 21.52 21.32 21.19 Modulation Channel E.r.p [dBm]
Channel Bandwidth: 5 MHz QPSK 16QAM LCH MCH HCH LCH MCH HCH 21.05 21.20 21.48 21.41 21.32 21.47 Modulation Channel E.r.p [dBm]
Channel Bandwidth: 10 MHz QPSK 16QAM LCH MCH HCH LCH MCH HCH 21.65 21.01 21.42 21.54 21.72 21.32 Verdict PASS PASS PASS PASS PASS PASS Verdict PASS PASS PASS PASS PASS PASS Verdict PASS PASS PASS PASS PASS PASS Verdict PASS PASS PASS PASS PASS PASS REPORT NO.: STR18098197I-2 PAGE 11 OF 28 FCC PART 22&27 Model: S917 FDD-LTE Band 7 Modulation Channel E.i.r.p [dBm]
Channel Bandwidth: 5 MHz QPSK 16QAM LCH MCH HCH LCH MCH HCH 20.72 20.86 20.93 20.47 20.62 20.58 Modulation Channel E.i.r.p [dBm]
Channel Bandwidth: 10 MHz QPSK 16QAM LCH MCH HCH LCH MCH HCH 21.14 21.05 21.17 21.09 21.22 21.17 Modulation Channel E.i.r.p [dBm]
Channel Bandwidth: 15 MHz QPSK 16QAM LCH MCH HCH LCH MCH HCH 20.82 20.78 20.65 20.73 21.11 21.08 Modulation Channel E.i.r.p [dBm]
Channel Bandwidth: 20 MHz QPSK 16QAM LCH MCH HCH LCH MCH HCH 20.75 20.62 20.73 20.69 20.71 20.58 Verdict PASS PASS PASS PASS PASS PASS Verdict PASS PASS PASS PASS PASS PASS Verdict PASS PASS PASS PASS PASS PASS Verdict PASS PASS PASS PASS PASS PASS REPORT NO.: STR18098197I-2 PAGE 12 OF 28 FCC PART 22&27 Model: S917 TDD-LTE Band 40 (2305-2315MHz) Channel Bandwidth: 5 MHz Modulation Channel E.i.r.p [dBm]
QPSK 16QAM LCH HCH LCH HCH 21.14 21.32 21.17 21.25 Modulation Channel E.i.r.p [dBm]
Channel Bandwidth: 10 MHz QPSK 16QAM MCH MCH TDD-LTE Band 40 (2350-2360MHz) 21.14 21.30 Modulation Channel E.i.r.p [dBm]
Channel Bandwidth: 5 MHz QPSK 16QAM LCH HCH LCH HCH 21.08 21.11 21.14 21.25 Channel Bandwidth: 10 MHz Modulation Channel E.i.r.p [dBm]
QPSK 16QAM MCH MCH 21.32 21.17 Max. Conducted Output Power Please refer to Appendix A: Average Power Output Data Test result: Pass Verdict PASS PASS PASS PASS Verdict PASS PASS Verdict PASS PASS PASS PASS Verdict PASS PASS REPORT NO.: STR18098197I-2 PAGE 13 OF 28 FCC PART 22&27 Model: S917 5. Peak-to-average Ratio (PAR) of Transmitter 5.1 Standard Applicable According to 27.50(B), the peak-to-average power ratio (PAPR) of the transmitter output power must not exceed 13 dB. The PAPR measurements should be made using either an instrument with complementary cumulative distribution function (CCDF) capabilities to determine that PAPR will not exceed 13 dB for more than 0.1 percent of the time or other Commission approved procedure. The measurement must be performed using a signal corresponding to the highest PAPR expected during periods of continuous transmission. 5.2 Test Procedure According with KDB 971168 1. The signal analyzer s CCDF measurement profile is enabled 2. Frequency = carrier center frequency 3. Measurement BW > Emission bandwidth of signal 4. The signal analyzer was set to collect one million samples to generate the CCDF curve 5. The measurement interval was set depending on the type of signal analyzed. For continuous signals (>98% duty cycle), the measurement interval was set to 1ms. For burst transmissions, the spectrum analyzer is set to use an internal RF Burst trigger that is synced with an incoming pulse and the measurement interval is set to less than the duration of the on time of one burst to ensure that energy is only captured during a time in which the transmitter is operating at maximum power Test Configuration for the emission bandwidth testing:
5.3 Summary of Test Results Please refer to Appendix B: Peak-to-Average Ratio Test result: Pass REPORT NO.: STR18098197I-2 PAGE 14 OF 28 FCC PART 22&27 Model: S917 6. Emission Bandwidth 6.1 Standard Applicable According to 22.917(b), The emission bandwidth is defined as the width of the signal between two points, one below the carrier center frequency and one above the carrier center frequency, outside of which all emissions are attenuated at least 26 dB below the transmitter power. According to 27.53, The emission bandwidth is defined as the width of the signal between two points, one below the carrier center frequency and one above the carrier center frequency, outside of which all emissions are attenuated at least 26 dB below the transmitter power. 6.2 Test Procedure According to 22.917(b), The emission bandwidth is defined as the width of the signal between two points, one below the carrier center frequency and one above the carrier center frequency, outside of which all emissions are attenuated at least 26 dB below the transmitter power. Test Configuration for the emission bandwidth testing:
6.3 Summary of Test Results/Plots Please refer to Appendix C: 26dB Bandwidth and Occupied Bandwidth Test result: Pass REPORT NO.: STR18098197I-2 PAGE 15 OF 28 FCC PART 22&27 Model: S917 7. Out of Band Emissions at Antenna Terminal 7.1 Standard Applicable According to 22.917(a), the power of any emissions outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log(P) dB. According to 27.53 (h), the power of any emission outside a licensee's frequency block shall be attenuated below the transmitter power (P) in watts by at least 43 + 10 log10 (P) dB. According to 27.53 (g) For operations in the 600 MHz band and the 698-746 MHz band, the power of any emission outside a licensee's frequency band(s) of operation shall be attenuated below the transmitter power (P) within the licensed band(s) of operation, measured in watts, by at least 43 + 10 log (P) dB. According to 27.53 (m)(4) For mobile digital stations, the attenuation factor shall be not less than 40 + 10 log (P) dB on all frequencies between the channel edge and 5 megahertz from the channel edge, 43 + 10 log (P) dB on all frequencies between 5 megahertz and X megahertz from the channel edge, and 55 + 10 log (P) dB on all frequencies more than X megahertz from the channel edge, where X is the greater of 6 megahertz or the actual emission bandwidth as defined in paragraph (m)(6) of this section. In addition, the attenuation factor shall not be less that 43 + 10 log (P) dB on all frequencies between 2490.5 MHz and 2496 MHz and 55 + 10 log (P) dB at or below 2490.5 MHz. 7.2 Test Procedure The RF output terminal of the transmitter was connected to the input of the spectrum analyzer via a suitable attenuation. The RBW of the spectrum analyzer was set to 100kHz and 1MHz for the scan frequency from 30MHz to 1GHz and the scan frequency from 1GHz to up to 10th harmonic. Test Configuration for the out of band emissions testing:
7.3 Summary of Test Results/Plots Please refer to Appendix D & E: Band Edge & Conducted Spurious Emission Test result: Pass REPORT NO.: STR18098197I-2 PAGE 16 OF 28 FCC PART 22&27 Model: S917 8. Spurious Radiated Emissions 8.1 Standard Applicable According to 22.917(a), the power of any emissions outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log(P) dB. According to 27.53 (h), the power of any emission outside a licensee's frequency block shall be attenuated below the transmitter power (P) in watts by at least 43 + 10 log10 (P) dB. According to 27.53 (g) the power of any emission outside a licensee's frequency band(s) of operation shall be attenuated below the transmitter power (P) within the licensed band(s) of operation, measured in watts, by at least 43 + 10 log (P) dB. 8.2 Test Procedure 1. The setup of EUT is according with per ANSI/TIA-603-D: 2010 and ANSI C63.4-2014 measurement procedure. 2. The measurement antenna was placed at a distance of 3 meters from the EUT. During the tests, the antenna height and polarization as well as EUT azimuth were varied in order to identify the maximum level of emissions from the EUT. The test was performed by placing the EUT on 3-orthogonal axis. 3. The frequency range up to tenth harmonic of the fundamental frequency was investigated. 4. Remove the EUT and replace it with substitution antenna. A signal generator was connected to the substitution antenna by a non-radiating cable. The absolute levels of the spurious emissions were measured by the substitution. Spurious attenuation limit in dB =43+10 Log10 (power out in Watts) 8.3 Summary of Test Results/Plots Note: 1. this EUT was tested in 3 orthogonal positions and the worst case position data was reported. 2. All test modes (different bandwidth and different modulation) are performed, but only the worst case is recorded in this report. REPORT NO.: STR18098197I-2 PAGE 17 OF 28 FCC PART 22&27 Model: S917 Spurious Emissions Below 1GHz Test Mode FDD_LTE Band 5 Polarity:
Horizontal No. Frequency Reading Correct Result Limit Margin Remark 1 2 3
(MHz) 44.9006 93.7685 313.2760
(dBm)
-78.90
-77.45
-78.40 dB
(dBm)
(dBm)
(dB)
-0.15
-2.35 3.53
-79.05
-13.00
-66.05
-79.80
-13.00
-66.80
-74.87
-13.00
-61.87 ERP ERP ERP REPORT NO.: STR18098197I-2 PAGE 18 OF 28 FCC PART 22&27 Model: S917 Test Mode FDD_LTE Band 5 Polarity:
Vertical No. Frequency Reading Correct Result Limit Margin Remark 1 2 3
(MHz) 48.1626 88.6525 265.6757
(dBm)
-78.98
-78.65
-78.67 dB
(dBm)
(dBm)
(dB) 0.15
-2.65 2.85
-78.83
-13.00
-65.83
-81.30
-13.00
-68.30
-75.82
-13.00
-62.82 ERP ERP ERP REPORT NO.: STR18098197I-2 PAGE 19 OF 28 FCC PART 22&27 Model: S917 Test Mode FDD_LTE Band 7 Polarity:
Horizontal No. Frequency Reading Correct Result Limit Margin Remark 1 2 3
(MHz) 49.0145 100.2286 425.0280
(dBm)
-79.33
-78.51
-77.76 dB
(dBm)
(dBm)
(dB) 0.17
-1.98 5.61
-79.16
-25.00
-54.16
-80.49
-25.00
-55.49
-72.15
-25.00
-47.15 ERP ERP ERP REPORT NO.: STR18098197I-2 PAGE 20 OF 28 FCC PART 22&27 Model: S917 Test Mode FDD_LTE Band 7 Polarity:
Vertical No. Frequency Reading Correct Result Limit Margin Remark 1 2 3
(MHz) 55.2207 91.8163 107.8877
(dBm)
-79.56
-78.46
-78.39 dB
(dBm)
(dBm)
(dB)
-0.38
-1.96
-1.86
-79.94
-25.00
-54.94
-80.42
-25.00
-55.42
-80.25
-25.00
-55.25 ERP ERP ERP REPORT NO.: STR18098197I-2 PAGE 21 OF 28 FCC PART 22&27 Model: S917 Test Mode TDD-LTE Band 40 Polarity:
Horizontal No. Frequency Reading Correct Result Limit Margin Remark 1 2 3
(MHz) 49.7068 106.3850 414.7223
(dBm)
-78.97
-78.00
-79.41 dB
(dBm)
(dBm)
(dB) 0.19
-1.71 5.39
-78.78
-13.00
-65.78
-79.71
-13.00
-66.71
-74.02
-13.00
-61.02 ERP ERP ERP REPORT NO.: STR18098197I-2 PAGE 22 OF 28 FCC PART 22&27 Model: S917 Test Mode TDD-LTE Band 40 Polarity:
Horizontal No. Frequency Reading Correct Result Limit Margin Remark 1 2 3
(MHz) 50.5860 89.2764 429.5228
(dBm)
-79.28
-78.82
-78.62 dB
(dBm)
(dBm)
(dB) 0.20
-2.16 5.74
-79.08
-13.00
-66.08
-80.98
-13.00
-67.98
-72.88
-13.00
-59.88 ERP ERP ERP REPORT NO.: STR18098197I-2 PAGE 23 OF 28 FCC PART 22&27 Model: S917 Test Mode TDD-LTE Band 40 Polarity:
Vertical No. Frequency Reading Correct Result Limit Margin Remark 1 2 3
(MHz) 90.2205 338.4001 566.6223
(dBm)
-78.74
-78.08
-78.12 dB
(dBm)
(dBm)
(dB)
-1.64
-80.38
-13.00
-67.38 4.44 7.47
-73.64
-13.00
-60.64
-70.65
-13.00
-57.65 ERP ERP ERP REPORT NO.: STR18098197I-2 PAGE 24 OF 28 FCC PART 22&27 Model: S917 Test Mode TDD-LTE Band 40 Polarity:
Vertical No. Frequency Reading Correct Result Limit Margin Remark 1 2 3
(MHz) 45.6948 91.1746 354.1831
(dBm)
-78.88
-78.56
-78.44 dB
(dBm)
(dBm)
(dB)
-0.05
-1.83 4.81
-78.93
-13.00
-65.93
-80.39
-13.00
-67.39
-73.63
-13.00
-60.63 ERP ERP ERP Note: Margin= (Reading+ Correct)- Limit REPORT NO.: STR18098197I-2 PAGE 25 OF 28 FCC PART 22&27 Model: S917 Spurious Emissions Above 1GHz For FDD_LTE Band 5 Mode Frequency Reading Correct
(MHz)
(dBm) dB Result
(dBm) Limit
(dBm) Margin
(dB) Polar H/V Low Channel (824.7MHz) 4.97 8.47 4.97 8.47
-30.43
-34.43
-30.95
-36.49 Middle Channel (836.5MHz) 5.11 8.54 5.11 8.54 5.25 8.57 5.25 8.57
-29.76
-32.73
-30.46
-35.41 High Channel (848.3MHz)
-30.24
-34.83
-32.35
-34.74
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-13
-17.43
-21.43
-17.95
-23.49
-16.76
-19.73
-17.46
-22.41
-17.24
-21.83
-19.35
-21.74 H H V V H H V V H H V V 1649.40 2474.10 1649.40 2474.10 1673.00 2509.50 1673.00 2509.50 1696.60 2544.90 1696.60 2544.90
-35.4
-42.9
-35.92
-44.96
-34.87
-41.27
-35.57
-43.95
-35.49
-43.4
-37.6
-43.31 For FDD_LTE Band 7 Mode Frequency Reading Correct
(MHz)
(dBm) dB Result
(dBm) Limit
(dBm) Margin
(dB) Polar H/V 5005.00 7507.50 5005.00 7507.50 5070.00 7605.00 5070.00 7605.00 5135.00 7702.50 5135.00 7702.50
-43.87
-43.84
-44.93
-44.11
-44.97
-43.76
-43.88
-44.09
-42.51
-43.46
-44.99
-44.87 Low Channel (2502.5MHz) 11.66 15.09 11.66 15.09
-32.21
-28.75
-33.27
-29.02 Middle Channel (2535MHz) 11.78 15.21 11.78 15.21
-33.19
-28.55
-32.1
-28.88 High Channel (2567.5MHz)
-30.62
-28.14
-33.1
-29.55 11.89 15.32 11.89 15.32
-25
-25
-25
-25
-25
-25
-25
-25
-25
-25
-25
-25
-7.21
-3.75
-8.27
-4.02
-8.19
-3.55
-7.1
-3.88
-5.62
-3.14
-8.1
-4.55 H H V V H H V V H H V V REPORT NO.: STR18098197I-2 PAGE 26 OF 28 FCC PART 22&27 Model: S917 For TDD-LTE Band 40 Mode (2305-2315MHZ) Frequency Reading Correct
(MHz)
(dBm) dB Result
(dBm) Limit
(dBm) Margin
(dB) Polar H/V 4615.00 6922.50 4615.00 6922.50 4625.00 6937.50 4625.00 6937.50
-38.05
-42.69
-37.1
-41.08
-38.6
-43.91
-38.88
-41.26 Low Channel (2307.5MHz) 9.18 12.51 9.18 12.51
-28.87
-30.18
-27.92
-28.57 High Channel (2312.5MHz) 9.32 13.05 9.32 13.05
-29.28
-30.86
-29.56
-28.21
-13
-13
-13
-13
-13
-13
-13
-13 For TDD-LTE Band 40 Mode (2350-2360MHZ)
-15.87
-17.18
-14.92
-15.57
-16.28
-17.86
-16.56
-15.21 H H V V H H V V Frequency Reading Correct
(MHz)
(dBm) dB Result
(dBm) Limit
(dBm) Margin
(dB) Polar H/V
-38.21
-44.52
-36.83
-42.35
-38.58
-41.72
-39.77
-43.72 Low Channel (2352.5MHz) 9.98 14.02 9.98 14.02
-28.23
-30.5
-26.85
-28.33 High Channel (2357.5MHz) 10.52 15.21 10.52 15.21
-28.06
-26.51
-29.25
-28.51
-13
-13
-13
-13
-13
-13
-13
-13
-15.23
-17.5
-13.85
-15.33
-15.06
-13.51
-16.25
-15.51 H H V V H H V V 4705.00 7057.50 4705.00 7057.50 4715.00 7072.50 4715.00 7072.50 Note: Result=Reading+ Correct, Margin= Result- Limit Note: Testing is carried out with frequency rang 9kHz to the tenth harmonics, other than listed in the table above are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. REPORT NO.: STR18098197I-2 PAGE 27 OF 28 FCC PART 22&27 Model: S917 9. Frequency Stability 9.1 Standard Applicable According to 22.355, 27.54 the limit is 2.5ppm. 9.2 Test Procedure According to 2.1055, the following test procedure was performed. The Frequency Stability is measured directly with a Frequency Domain Analyzer. Frequency Deviation in ppm is calculated from the measured peak to peak value. The Carrier Frequency Stability over Power Supply Voltage and over Temperature is measured with a Frequency Domain Analyzer in histogram mode 9.3 Summary of Test Results/Plots Note: 1.Normal Voltage NV=DC3.8V; Low Voltage LV=DC3.6V;High Voltage HV=DC4.35 Please refer to Appendix F: Frequency Stability Test result: Pass
***** END OF REPORT *****
REPORT NO.: STR18098197I-2 PAGE 28 OF 28 FCC PART 22&27
1 2 3 | Test Setup Photos PCB | Test Setup Photos | 406.72 KiB |
M Model: S917 EXHIBI T 4 - TES ST SETUP P PHOTO OGRAPH HS Emission Tes st Setup (Belo ow 30MHz) Radiation E Radiation E Emission Tes st Setup (30M MHz to 1GHz z) Report No.: S STR18098197 7I-1/2 FCC Part 2 22H&24E&277 M Model: S917 Radiation E Emission Tes st Setup (1GH Hz to 18GHz z) Radiation E Emission Tes st Setup (Abo ove 18GHz) Report No.: S STR18098197 7I-1/2 FCC Part 2 22H&24E&277 M Model: S917 Extreme C Condition T Test Setup Mobile Co ommunicat tion Test Se etup Report No.: S STR18098197 7I-1/2 FCC Part 2 22H&24E&277
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-02-15 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
2 | 824.2 ~ 848.8 | PCB - PCS Licensed Transmitter | ||
3 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2019-02-15
|
||||
1 2 3 | Applicant's complete, legal business name |
Shandong Senter Electronic Co., Ltd.
|
||||
1 2 3 | FCC Registration Number (FRN) |
0028170066
|
||||
1 2 3 | Physical Address |
No.18 Liuyishan Rd, New & Hi-Tech Area
|
||||
1 2 3 |
Zibo, Shandong, N/A
|
|||||
1 2 3 |
China
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 2 3 |
t******@timcoengr.com
|
|||||
1 2 3 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 3 |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
2ASDX
|
||||
1 2 3 | Equipment Product Code |
S917
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
J****** L****
|
||||
1 2 3 | Title |
Quality Manager
|
||||
1 2 3 | Telephone Number |
0533-********
|
||||
1 2 3 | Fax Number |
0533-********
|
||||
1 2 3 |
l******@senter.com.cn
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 3 | PCB - PCS Licensed Transmitter | |||||
1 2 3 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Industrial PDA | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Original Equipment | ||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Output Power listed is the maximum conducted output power. The highest reported SAR for body-worn accessory and simultaneous transmission exposure conditions are < 0.10 W/kg and 1.25 W/kg, respectively. This device supports 20 and 40 MHz bandwidth modes. | ||||
1 2 3 | Output Power is EIRP and ERP for above and below 1 GHz, respectively. The highest reported SAR for body-worn accessory and simultaneous transmission exposure conditions are 1.01 W/kg and 1.25 W/kg, respectively. This device supports LTE of 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 5 and 10 MHz bandwidth modes for FDD LTE Band 40; and LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for FDD LTE Band 5. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations. | |||||
1 2 3 | Output Power listed is conducted. | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
Shenzhen SEM Test Technology Co. Ltd
|
||||
1 2 3 | Name |
J**** S********
|
||||
1 2 3 | Telephone Number |
86 75******** Extension:
|
||||
1 2 3 | Fax Number |
86-75********
|
||||
1 2 3 |
j******@semtest.com.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412 | 2462 | 0.0679 | ||||||||||||||||||||||||||||||||||||
1 | 2 | 15C | 2402 | 2480 | 0.0005 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 22H | 824.2 | 848.8 | 1.2274 | 0.0705 ppm | 247KGXW | ||||||||||||||||||||||||||||||||||
2 | 2 | 24E | 1850.2 | 1909.8 | 0.7211 | 0.033 ppm | 249KGXW | ||||||||||||||||||||||||||||||||||
2 | 3 | 22H | 824.2 | 848.8 | 0.2742 | 0.0705 ppm | 246KG7W | ||||||||||||||||||||||||||||||||||
2 | 4 | 24E | 1850.2 | 1909.8 | 0.2427 | 0.033 ppm | 245KG7W | ||||||||||||||||||||||||||||||||||
2 | 5 | 22H | 826.4 | 846.6 | 0.1663 | 0.0622 ppm | 4M15F9W | ||||||||||||||||||||||||||||||||||
2 | 6 | 24E | 1852.4 | 1907.6 | 0.1578 | 0.0351 ppm | 4M16F9W | ||||||||||||||||||||||||||||||||||
2 | 7 | 22H | 829 | 844 | 0.1462 | 0.006 ppm | 8M94G7D | ||||||||||||||||||||||||||||||||||
2 | 8 | 22H | 829 | 844 | 0.1486 | 0.006 ppm | 8M94W7D | ||||||||||||||||||||||||||||||||||
2 | 9 | 27 | 2505 | 2565 | 0.1309 | 0.002 ppm | 8M94G7D | ||||||||||||||||||||||||||||||||||
2 | 1 | 27 | 2510 | 2560 | 0.1189 | 0.0018 ppm | 17M9G7D | ||||||||||||||||||||||||||||||||||
2 | 11 | 27 | 2505 | 2565 | 0.1324 | 0.002 ppm | 8M95W7D | ||||||||||||||||||||||||||||||||||
2 | 12 | 27 | 2510 | 2560 | 0.1178 | 0.0019 ppm | 17M9W7D | ||||||||||||||||||||||||||||||||||
2 | 13 | 27 | 2307.5 | 2312.5 | 0.1355 | 0.002 ppm | 4M48G7D | ||||||||||||||||||||||||||||||||||
2 | 14 | 27 | 2310 | 2310 | 0.13 | 0.0021 ppm | 8M93G7D | ||||||||||||||||||||||||||||||||||
2 | 15 | 27 | 2310 | 2310 | 0.1349 | 0.0021 ppm | 8M94W7D | ||||||||||||||||||||||||||||||||||
2 | 16 | 27 | 2355 | 2355 | 0.1355 | 0.0021 ppm | 8M93G7D | ||||||||||||||||||||||||||||||||||
2 | 17 | 27 | 2352.5 | 2357.5 | 0.1334 | 0.0021 ppm | 4M47W7D | ||||||||||||||||||||||||||||||||||
2 | 18 | 27 | 2355 | 2355 | 0.1309 | 0.0017 ppm | 8M93W7D | ||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0055000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC