3COiiii!E reader TCE7110 Fe W X 3core logo are registered 2019 3core technologies.Inc. trademarks of 3core technologies.Inc. Copyright@
Installation 3C ii!E 3core technologies.Inc. N0.7 175. Wanhuangdu Road. Shanghai. Jingan District. 021-62533302(Fax) 021-62533841 PR China 34 32, Wiegand
(US) Model: TCE7110 Reader utput:Wiegand 26, Wiegand
(GB) Power requirement:
12V DC Ilormalcurrent consumpti n:30mA Activated current c nsumption:
50mA Read range: 20 60mm (0.8 2.4 (typically) 131F)
-15to+ 555F t Operating temperature:
humidity:
ndensing Relative n 90% max perating n c Size: 122x8424mm HxWxD IP Rating:
IP 67 Component 3CORE reader Installation Manual 4mm40mm machine screw 3.5mm X 40mm self-tapping machine screw Amount 2 2 Line color Definition Wiegand1 White BEEP Blue WiegandO Green LED Gray
+12V Red GND Black
*Installation extension RS232, RS485, USB and UART. module suppoSimrtand utputof extendednction:
n m the function the function Optional dule Expansi conversion RS232, f Wiegand/UART t 2601 OEXB supports RS485 and RS422 f Wiegand/UART t conversion USB 2601 OEXB supports Configurati ncard including Wiegand changethe card setting, Configuration card may be used t to reader with output
(default as Wiegand32) utput(limited and keyboard accepts nself test, de).The reader, keyb operation setting after p ardm wer of configuration card. When the p nreader wer c card, it stops accepting non configuration n operation nfigurati this case, it is necessary makerec nfigurati meaning power t down and reader and power nagain reads the first nof reader, t of the card. In
(CNTCE7110
.263234 12V 30mA 50mA 20-60mm
(0.8 2.4 15'C55C(5131F)
<90% max 12284x24mmHxWxD IP67 3CORE 4nn40mm 3.5nn40mm 1 1 2 2 1 BEEP O LED
+12V GND 32,85:USB, UARTll<J 26010EXBWiegand/UARTRS232, RS485, RS422 26011EXBWiegand/UARTUSB WiegandWieg and32 FCC WARNING STATEMENT Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.