FCC ID: 2AON8-R708 Pocket Router

BMC R708A User Manual Interface key Illustrate Power key Long press over 5 seconds to power on and long press to power off WPS Reset Press to active the WPS The Reset button is on the opposite side of the machine. If you forget Administrator password or Wireless network key, you can press the Reset key to restore factory default settings. Solid:booting up the device LED Indication Indicator Color Working Status Power LED Green Amber Blink:Charging Blue Amber Red SMS LED Blue Blue Solid:Battery High(100%-60%) or Charge Completed Solid:Battery Middle(60%-15%) Solid: Battery too low nearly shutdown(15%) Blink:NewSMS Solid: Regiester to LTE(not connect) Blink: Connected toLTE network Solid: Regiester to 3G(not connect) Blink: Connected to3G network Solid: Regiester to2G(not connect) Signal LED Green Purple Blink:

Turn on-0.5s Turn off-0.5s Red Blue Blink: Connected to2G network Solid:No Service/Device Error Solid:No Client Blink: Client is actived Blink: WPS is actived WiFi LED Installation Follow the diagram to install the SIM card and SD card Blink:

Turn on-0.2s Turn off-0.1s Tips: Always switch the device off and disconnect the charger before removing the 1. Remove the back cover and battery;

2. Insert the SIM card and SD card. Ensure that the contact area on the card is facing down and that the beveled corner on the card is facing the beveled corner on the 3. Align the battery contacts with the battery compartment connectors, and insert the battery. Replace the back cover lastly. battery. holder. Charge Your battery has been partially charged at the factory. If the device indicates a low charge, do the following:

1. Connect the charger to an outlet. then from the outlet. OneUsing charge adapter 2. Connect the USB charger plug to your devices USB port. 3. When the device indicates a full charge, disconnect the charger from the device, TwoUsing USB port BMC R708A Usage R708A support 4G/3G networks. Insert the SIM card, Wi-Fi devices and the computer can access the Internet through R708A, enjoy high-speed network services.Smart phones, tablet computers, game consoles and other Wi-Fi devices can be connected with the R708A Wi-Fi connection for Internet access. Computers & laptops etc. may be connected to the R708A via USB cable for Internet Access. R708A connects computer for the first time via a USB connection, you need to follow the prompts to install the driver Wi-Fi wireless Internet access In order for a WiFi device to establish a connection with the R708A for the first time, you will need to select the R708A SSID (WiFi name) & enter the relevant WiFi password, which you may find in the following ways:

Method one: on the nameplate view the default SSID and Wi-Fi passwords Method Two: Login management page view 1.Computer, open your browser, input http://192.168.0.1 and enter. The default Account is admin The default Password is admin Enter the Account and Password, login the administration pages 2.Enter the Wi-Fi menu, view the default SSID and Wi-Fi password The default SSID is R708A The default Wi-Fi Password is 87654321 Recommend that you start using R708A administration pages after setting a convenient landing memorizing SSID and a higher safety factor Wi-Fi passwords Install the driver and connecting the device USB Connection:Windows 7 for example 1. Keep R708A powering on,Plug the device into your computer,it will shows like the following pictures step by step. 2. Double-click the

, wait for the installation to complete 3. Check the network card is installed correctly,like the following pictures Or, Establish Wi-Fi connection:you must ensure that the computer equipped with a wireless network card. If the computer showed the presence of Wi-Fi connectivity, the wireless LAN is available. Otherwise, you need to check your wireless network card is working properly. 1. In the Wi-Fi list, select the SSID consistent with R708A Wi-Fi, click Connect 2. Enter the correct Wi-Fi password, click OK 3. Wait a moment, Wi-Fi connection is displayed next to the name, Wi-Fi connection is successful WebUI Home First part of the main display settings and network status information, such as IPaddress, SIM card status, type and quality of the network signal, whether it is roaming, with or without a new message, and traffic statistics,and system uptime,and so on. Wizard You can quickly change the LAN configuration, set the APN , and change the SSID \

password through the wizard function. WAN 1.Connection Dialing Mode:

page. Select the Auto Mode, after you turn on R708A without additional operations, the device will automatically connect to the network; select the Manual Mode, you need to manually connect to the network after opening the R708A management 2.APN Setting: You can customize the network configuration or manually add the new APN and set default APN. 3.4G/3G Modem There are four types of networks can be choose: Auto is 4G/3G, LTE Only is using only 4G, WCDMA Only is using only 3G. 4.PIN Open your PIN, if you reboot the device, you need to login management page,and the page will prompted to enter the correct PIN code, you can use the SIM card. PIN

/ PUK code supplied with the SIM card provided by your carrier, please consult your carrier. 4. PLMN 1.LAN We can change IP address in this page. 2.DHCP Public Land Mobile Network have two mode, one is automatic,the other is manual.You can search the current network manually and register. DHCP Mode: Select the server mode, the device can be done using a DHCP server;

choose None, which is off the server function. Start / End IP address: Changing DHCP assigned IP and IP segments. Lease Time: Each is assigned a time to use the IP LeasedHosts: the R708A each wireless device list and USB device can view the Host name, MAC Address, IP Address, information about the Remaining Time. SMS When using SIM card to access network, you could also send text messages at the time. You can send, receive, reply , forward, and save test messages. You can send 10 text messages at the same time,SMS number intervals with a semicolon. Also you can setting the storage location of messages, and so on. We can operating the SMS in this page. Wi-Fi 1.Basic We can setting the wifi configuration in this page, like B/G/N mode, Channel, R708A supports two kinds of WPS authentication, PBC and PIN. Default is PBC SSID,WIFI KEY and so on. 2.WPS authentication. WPS PBC authentication:

If your WiFi Enabled ,device supports WPS (WiFi Protected Setup) and you have forgotten or do not wish to enter your password to connect to your R708A, you may use the following available procedures for quick access to WiFi. Open the WPS:

WPS can be opened by two methods. The fist method is , Entering the management interface page, press the Apply button , open the WPS. It will lasting 120 seconds. Like the following picture. Using WPS to connecting the R708A (Computer for example):

You can press the WPS button on the wireless card if your wireless card also supports WPS authentication. Waitting for a moment , It will be prompted to connect successfully. Or Select the SSID of the device and connect. then you can see connecting process The second method is, Select the SSID of the device and connect Press the WPS button on theR708A, activate the WPS. It will lasting 120 seconds. then you can see connecting process. WPS PIN authentication:

The connection to the R708A is achieved by inputting the relevant PIN key into the enrollee PIN text box, which you may find in the wireless network card. When you applied, It will lasting 120 seconds. The premise is that the wireless network card or the clients must support WPS PIN authentication. Like the following pictures. 3. MAC Filter Deny list Stations: If you add the computers or wireless devices MAC address into the list, it can prohibiting the computers or wireless devices connect to the R708A.The computes or wireless devices MAC address which are not in the list can able to connect to R708A. Allow list Stations: Opposite with Deny list Stations. It only allows the devices in the list to connect to the R708A, other wireless devices are unable to connect to the Disable: It means close the function of the MAC Address Filter. R708A 4.Station List Showthe information of wireless devices which are connected to the R708A. Security 1. Firewall Firewall configuration: You can Disable or Enable the Firewall function. Also you can setting the matching packets ipv6/ipv4 rule to receive or reject. You can add the rule in the list and click apply confirm it. 2. NAT The R708A supports NAT/IPSEC VPN Pass Through/PPTP VPN Pass Through/L2TP VPN Pass Through/Webserver WWAN Access. When some hosts inside the private network have already allocated the local IP address, that is, only the private address used in the private network, but now they want to communicate with the host on the Internet (no need to encrypt), we can use the NAT method. 3. DMZ Receive all the data from external network interface forwarded toDMZ IP address Enable DMZ: If an application has trouble working from behind the router, you can expose one computer to the Internet and run the application on that computer. Note: Placing a computer in the DMZ may expose that computer to a variety of security risks. Use of this option is only recommended as a last resort. DMZ Address: Specify the IP address of the computer on the LAN that you want to have unrestricted Internet communication. System 1. About IMEI, baseband version. 2.Configuration R708A displays some basic information, such as device name, firmware version, Restore the factory settings, All the personal configuration will be deleted, all configuration pages will be restored to the factory defaults. 3.Firmware Upgrade The page allows you to upgrade the firmware. It have two mode. Remote Server:

When you power on the device , if you insert the SIM card and register the internet .it can automatic check whether there is a new version, if there is a new version was detected, can be directly upgrade. Manual:

You can download updates to the local computer, and then choose to download in the page of upgrade file to upgrade. 4.Password Modify the login password for administrator interface. Also you can setting the time to logout the UI automatically. 5.Date and Time You can synchronize the time with the host , you can also select the time zone 6.Language You can change the UI language in this page. 5.Power saving You can change the time of sleep mode or deep sleep mode. In this page you also Sleep mode: System will enter into the sleep mode, when there is no Wi-Fi client connected to Deep sleep mode: System will enter into deep sleep mode, when there is no Internet access can Disable the Power saving function. this device. and no Wi-Fi client connected to this device. 8.Reboot Safety Warning Caution:RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Specific Absorption Rate (SAR) information:

This Portable computer meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Smart phone has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the phone kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain an 0 mm separation distance between the user's body and the back of the phone. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

LABEL AND LOCATION

(Size: L4.0cm x 2.0cm) Label Location _____________________________________________________________________________________________________

Shanghai BroadMobi Communication Technology Co., Ltd. Agent Authorization Company: Shanghai BroadMobi Communication Technology Co., Ltd. Address: 15F, Building 9, No.99 Tianzhou Rd., Xuhui District, Shanghai, P.R. China Product Name: Pocket Router Trade Mark: Broadmobi Model Number(s): R708, R708A, R708C FCC ID: 2AON8-R708 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2020-11-25 Name:

tao jiang Title:

manager Company: Shanghai BroadMobi Communication Technology Co., Ltd.

Shanghai BroadMobi Communication Technology Co., Ltd. 15F, Building 9, No.99 Tianzhou Rd., Xuhui District, Shanghai, P.R. China Series Models Description Date: 2020/11/25 Dear Sir/Madam, We, Shanghai BroadMobi Communication Technology Co., Ltd. Hereby declares the following statement for EU/US/MIC certificate, PCB board, Schematic, Hardware version, Software version, structure and internal photos are same except for the models name; named differently due to marketing purposes. Product name:

Pocket Router Model no.:

R708, R708A, R708C Sincerely yours Name / Title: tao jiang / manager Company: Shanghai BroadMobi Communication Technology Co., Ltd. Address: 15F, Building 9, No.99 Tianzhou Rd., Xuhui District, Shanghai, P.R. China Phone: 8621-60913308-815 Fax: 8621-60913308-815 E-Mail: jiangtao@broadmobi.com

Shanghai BroadMobi Communication Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2020-11-25 Subject; Request for Confidentiality FCC ID: 2AON8-R708 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description BOM Tune up Software Security Requirements External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name / Title: tao jiang / manager Company: Shanghai BroadMobi Communication Technology Co., Ltd. Address: 15F, Building 9, No.99 Tianzhou Rd., Xuhui District, Shanghai, P.R. China Phone: 8621-60913308-815 Fax: 8621-60913308-815 E-Mail: jiangtao@broadmobi.com

Shanghai BroadMobi Communication Technology Co., Ltd. WIFI Channel 12 and 13 Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for FCC ID: 2AON8-R708 Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However, all the operated channels cant be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note:

1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo-

location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following:

Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code

(MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-

case basis Other suitable geo-location data based on IP addresses or other reliable source. Name / Title: tao jiang / manager Signature:

Phone: 8621-60913308-815 Email: jiangtao@broadmobi.com Date: 2020-11-25 Page 1 of 1 Rev.2.0