FCC ID: 2AORE-FP1 Flydigi Direwolf Gaming Controller

Direwolf Gaming Controller User Manual When the product is shipped, the English version of the user manual will be displayed in the form of an online document, which can be viewed by scanning the QR code on the right above the code. Controller FCC ID: 2AORE-FP1 Dongle FCC ID: 2AORE-R2 Connection - Use on the computer Wireless dongle connection 1 Plug the dongle into the USB port of the computer 2 Set the controller back switch to 3 Click the , the controller will automatically connect, At this time, the light is always white 4 If the light is blue, press and hold the + X key at the same time Until the light turns white, press and hold until the light in ash , unplug the dongle and reinsert it to complete the pairing Wired connection Turn the controller back switch to , connect the PC and contoller through the USB cable, the light will stay in white Connection successful cz Connection - Use on Switch 1 Click the controller icon on the Switch Enter [Change Grip/Order]

2 Set the controller back switch to xx 3 Press and hold the for 3 seconds until the light in blue ash, the controller will be auto paired, and the light will stay in blue 4 For daily use, set the back switch to xx, click the , the controller will autoconnect A B B A X Y Y X SELECT START

Home Capture Switch cz Connection - Use on Android devices 1 Set the back switch to 2 Press and hold the for 3 seconds until the light in blue ash, the controller will enters the pairing mode 3 Turn on the device Bluetooth and connect to Flydigi Direwolf. The light will stay in blue 4 For daily use, set the back switch to click , the controller will auto connect Connection - Use on iOS devices Set the back switch to , Turn on the device Bluetooth and connect to Xbox Wireless Controller. The light will stay in blue Specifications Mode Platform light Connection method PC White USB Dongle System requirements Win 7 and above PC/Android Blue Wired/Bluetooth Wired: Win 7 and above Bluetooth: Android 10 and above Switch Blue Bluetooth Switch iOS Blue Bluetooth iOS 14 and above Radio frequency: Wireless, Bluetooth 5.0 Use distance: less than 10 meters Battery information: rechargeable lithium-ion battery, battery capacity 450mAh, charging time 3 hours, Charging voltage 5V, charging current 350mA Working current: the current is less than 40mA during use, and the current is less than 20A during standby Product weight: 175 g Temperature range: 5

~ 45 use and storage cz Appearance Hybrid D-Pad FN Home USB Port 2 Additional Remappable Back Buttons 1 Handle mode gear Other accessories (multi-mode) USB-C cable/USB wireless Dongle 1 Handle mode gear for multimode only Flydigi space station, Set your own customization Visit Flydigi ocial website www.ydigi.com download "Flydigi Space Station", you can customize buttons, macros, somatosensory, Trigger and other functions. Flydigi space station Button mapping Button can be mapped as the controller button, mouse and keyboard button Macro definition You can set up continuous transmission, record joystick and key data, simplify tedious operation Q&A Somatosensory mapping The somatosensory can be mapped to mouse movement, and the shooting game is extremely accurate Trigger adjustment Adjustable trigger stroke/dead zone to meet multi-scene control needs Q: The controller cannot be paired with the Dongle or Bluetooth device?

A: Please make sure the controller back switch position is correct, long press the for 3 seconds, the light in ashes, and the handle enters the pairing mode, unplug the Dongle and reinsert it, cancel the paired device on the Bluetooth settings page, and reconnect. QHow to upgrade the handle rmware?

A: Install Flydigi Space Station on your computer, or install the Flydigi Game Center App on your mobile phone, according to the software Guide to rmware upgrade"

Name and Concentration of Toxic or Hazardous Substances and Elements Toxic or Hazardous Substances and Elements Pb Hg Cd Cr PBB PBDE Part Name PCBA Outer casing Packaging Wires Polymer battery Silicone Metal, adhesive tape and small structural parts This table is based on the regulations of SJ/T 11364-2014 indicates that the concentration of the toxic or hazardous substance in all homogeneous materials in this part is below the limitrequirement in GB/T 26572-2011 indicates that the concentration of the toxic or hazardous substance in at least one homogeneous material of this part exceeds the limit requirement in GB/T 26572-2011 The environmentally-friendly use period of this product is 10 years based on normal operating conditions. Federal Communications Commission (FCC) Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction Federal Communication Commission (FCC) Radiation Exposure Statement Power is so low that no RF exposure calculation is needed. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/ TV technician for help.

39.60 ARR HFA Flydigi Direwolf Gaming Controller Model: Direwolf Input: 5V= 450mA CMIIT ID: xxxxxxxx FCC ID: 2AORE-FP1 bis CSS FRRARAS) Made in China Beh OG NL81220100001

24.15 20.95

C5266091_X10_Ed.2 Shanghai Flydigi Electronics Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 9/27/2022 Subject: Request for Confidentiality FCC ID: 2AORE-FP1 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No No No NOTE 1 NOTE 1 No No Short-Term Confidentiality NOTE 2 No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. 1/1 C5266091_X10_Ed.2 Sincerely, Signature:

Name: Xiang Gao Title: Quality supervisor 1/1

C5266091_X8_Ed.1 Shanghai Flydigi Electronics Technology Co., Ltd. Letter of Authorization Company: Shanghai Flydigi Electronics Technology Co., Ltd. Address: Rm1108, No.258 Guoxia Rd, Yangpu District, Shanghai Product Name: Flydigi Direwolf Gaming Controller Model Number: DireWolf FCC Identifier: 2AORE-FP1 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Xiang Gao Date: 9/27/2022 Title: Quality supervisor Signature of applicant:

1/1