FCC ID: 2AORE-WASP2 Flydigi WASP 2 One-handed Gamepad

Flydigi LB Joystick B A Logo

(LED indicator) Power switch LT Lock M

(No M button in standard edition) Utool Cable

(to activate Android devices) Charging Port

(Charging LED indicator) User Guide STEP1: Download Flydigi Game Center Scan the QR code to download and install Flydigi Game Center App Store Google Play STEP 2 Connect to device via Bluetooth In Flydigi Game Center > Gamepad, tap Connect and follow the instructions displayed to connect the gamepad. GamePad Disconnected Flydigi Device Only Connect The paired gamepad will automatically reconnect when it is turned on, as long as your device is within the specified range and the Bluetooth is on. If you wish to pair the gamepad with another device, you must first turn off Bluetooth on the current device, then go to Flydigi Game Center and tap Connect Gamepad. STEP 3 Activate button mapping

(Android users only) iOS users please skip toSTEP 4 Follow the activation instructions in Flydigi Game Center - Key Mapping to enable USB debugging and complete the activation. STEP 4 Install the gamepad 1. Press the lock button to pop up the handle. 2. Press on the handle until your device is secured. Pull out the Utool cable from Wasp 2, plug it into the charging port of your device, then turn on the gamepad. If your device has Micro-USB only, you needto purchase an additional Type-C to Micro USB adapter.

*

Allow USB debugging?

The computers RSA key ngerprint is:

C7:BB:CC:19:26:38:24:97:09:C6:BE:98:EA:5B:16:D7. Always allow this computer to debug. Cancel OK If your device prompts you to authorize USB debugging, tap OK. Once activation is successful, the indicator light will stop blinking and stay in blue. You can then unplug the Utool cable. STEP 5 Start game Accessories Installation Instructions This part is only applicable to Elite version. For a better gaming experience, please launch the game inFlydigi Game Center. M Follow the steps in the diagram to insert the buckle of the M button into the holder at the back of the gamepad and the M button will be automatically placed in the correct position. Joystick For all users across Android and IOS:

Please tap Gamepad > Add Game to add a game downloaded from App Store or Google Play, then open the game to start. Follow the steps in the diagram to apply a force perpendicular to the gamepad to remove or install the joystick. Basic Operations and LED indicator Status Turn on/off device Switch the power button to the left. Switch the power button to the right. Bluetooth Pairing Power on the device for the first time. Normal Mode Reconnect Gamepad works properly after the pairing is completed. Paired devices automatically reconnect when powered on. LED indicator blinks and gamepad powers on. LED indicator blinks and gamepad powers off. LED indicator blinks in blue and gamepad enters the pairing mode. LED indicator stays in blue when device is connected. LED indicator stays in blue when device is connected. Low Battery Remaining power is within 20% to 10%. LED indicator blinks in green slowly. Remaining power is less than 10%. LED indicator blinks in green quickly. Charging USB charging port is connected to a power source. LED indicator stays in red. Charging is completed. LED indicator turns off. Calibrate joystick Press and hold the Logo and LB buttons for 3 seconds when device is on. LED indicator blinks in green twice after the calibration is completed. Specification iOS Android iPhone 5s and above with iOS 9.3 and above. Android devices with Android 6.0 and above & Bluetooth 4.0, thickness of less than 10.5 mm and width of less than 86 mm. 2402-2480MHz

<10 m 83.25*82*36mm 280mAh 1.5-2 hours Working current <4 mA; Standby current <0.2 mA Supported Devices Wireless frequency Bluetooth range Dimensions Battery capacity Charging time Working current Charging current Battery life Storage temperature Operating temperature Weight Conducted Peak Output Power Charging voltage: 5V; charging current < 280 mA80h 80 hours

-20C to +80C 0C to +40C Approx. 90g Approx. 90g Approx. 90g 1. 1dBm 1.71dBm Name and Concentration of Toxic or Hazardous Substances and Elements Toxic or Hazardous Substances and Elements Pb Hg Cd Cr PBB PBDE Part Name PCBA Outer casing Packaging Wires Polymer battery Silicone Metal, adhesive tape and small structural parts This table is based on the regulations of SJ/T 11364-2014 indicates that the concentration of the toxic or hazardous substance in all homogeneous materials in this part is below the limit requirement in GB/T 26572-2011 indicates that the concentration of the toxic or hazardous substance in at least one homogeneous material of this part exceeds the limit requirement in GB/T 26572-2011 The environmentally-friendly use period of this product is 10 years based on normal operating conditions. Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. RF warning for Portable device:

The device has been evaluated to meet general RF exposure requirment. The device can be used in portable exposure condition without restriction.

Pisbeea WASP 2 FCC ID: 2AORE-WASP2 Input: 50=== 280mA Shanghai Flydigi Electronics Technology Co., Ltd. aes Made in China nL mm NDEXXXXXXXXXX WASP 2 FCC ID: 2AORE-WASP2 Input: 5.0V== 280mA Shanghai Flydigi Electronics Technology Co., Ltd. aes Made in Chiha NDEXXXXXXXXXX

Company: Shanghai Flydigi Electronics Technology Co., Ltd. Add: Rm1108, No.258 Guoxia Rd, Yangpu District, Shanghai, China 200000 Tel: 13822102451 Fax: +86 21-60527310 Email: huangsq@flydigi.com FCC Authorization Date: 2019-05-07 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We, Shanghai Flydigi Electronics Technology Co., Ltd., Hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp. on our behalf shall have the same effect as our own action. We, Shanghai Flydigi Electronics Technology Co., Ltd., hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature:

Typed or Printed Name: Shuiqing Huang Title: International Trade Manger QA-FR-170-B

Company: Shanghai Flydigi Electronics Technology Co., Ltd. Add: Rm1108, No.258 Guoxia Rd, Yangpu District, Shanghai, China 200000 Tel: 13822102451 Fax: +86 21-60527310 Email: huangsq@flydigi.com FCC Confidential Authorization Date: 2019-05-07 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AORE-WASP2 To: whom it may concern, In accordance with Sections 0.457 and 0.459 of the Commissions Rules, Shanghai Flydigi Electronics Technology Co., Ltd. hereby requests long-term confidential treatment of information accompanying this application as outlined below:

Block Diagram Schematics Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature:

Typed or Printed Name: Shuiqing Huang Title: International Trade Manger