36764 BHR5596GL 6934177761218 MJJGCJYD001QW Xiaomi Smart Laser Measure User Manual 1 70mm Read this manual carefully before use, and retain it for future reference. Product Overview Display Thank you for using Xiaomi Smart Laser Measure. 1 2 1 2 3 4 How to Use Turning on/o Turning on: When the laser measure is o, press and hold the power/measure button for at least 2 seconds to turn it on. The display will light up, which indicates the laser measure is ready to take a measurement. Turning o: When the laser measure is on, press and hold the power/measure button for 3 seconds to turn it o. If no operation is made to the laser measure within 180 seconds, it will automatically turn o. Measuring 5 6 Measuring Mode/
Laser Emitting Notication Previous Measuring Value Bluetooth Connection Status Battery Level Current Measuring Value Measurement Unit 1 2 3 4 5 6 1. Once the laser measure is turned on, press the power/measure button to continuously emit laser light for constant measurements. The display will show the measuring values in real-time. 2. Press the power/measure button again to stop emitting laser light and the display will show the nal measuring value. Once the laser measure is connected to the app, this measuring value will be synchronized to the measurement list in the app. 3. The laser measure is generally used indoors. It is not suitable for outdoor use because the sunlight interferes greatly with the laser light, and the measurement accuracy will decrease signicantly if you cannot see the red dot of the laser light clearly. Connecting with the Mi Home/Xiaomi Home App This product works with Mi Home/Xiaomi Home app*. Use the Mi Home/Xiaomi Home app to control your device. Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search for
"Mi Home/Xiaomi Home" in the app store to download and install it. 4. This laser measure has two measuring modes based on dierent original points of the measurement. When using the front-based mode, the measurement range doesn't include the length of this laser measure. When using the rear-based mode, the length of the laser measure, which is 80 mm, will be included in the measurement range. Open the Mi Home/Xiaomi Home app, tap the icon "+" in the upper right, and then follow the instructions to add your device.
* The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default. Switching mode The default mode for this laser measure is the rear-based mode " ", which means the original point of the measurement is the rear end of the laser measure. To switch to the front-based mode " ", double press the power/measure button. Each time the laser measure is turned on, it will be reset to the rear-based mode " ". Note:
The version of the app might have been updated, please follow the instructions based on the current app version. The Mi Home/Xiaomi Home app that the laser measure is connected to requires version 6.9.200 or later. Please update it if necessary. This laser measure comes with the Bluetooth function. When the laser measure is turned on, the Bluetooth will be automatically enabled, and the " " icon blinks. Once connected, the " " icon will remain lit. The Bluetooth will be automatically disabled if it is not connected for 180 seconds. Charging A type-C charging cable is provided. If the laser measure hasn't been used for an extended period, fully charge it before use. The laser measure cannot be used for measurement during charging. Resetting When the laser measure is on/o, press and hold the power/measure button for 7 seconds. The display will blink twice and the laser measure will be restored to the factory settings. Do not use any methods to disassemble or repair the laser measure on your own. Never illegally modify or change the laser emitting performance of the laser measure. Properly store the laser measure and keep it out of reach of children and unrelated people. Do not point the laser light at your eyes and other body parts or those of other people. Never aim the laser light at the surfaces of highly reective objects. Do not use the laser measure near aircraft or medical equipment, or use it in a ammable or explosive environment, because the electromagnetic radiation of this laser measure may interfere with other devices. Do not dispose of used batteries and unusable laser measures with household waste. Dispose of them per national or local laws and regulations. Warning Laser radiation Do not look directly into the laser light. Class 2 laser product Max. output of laser radiation < 1 mW 630680 nm wavelength IEC 60825-1: 2014; EN 60825-1: 2014 Switching unit The measurement units of this laser measure are meter (m) and foot (ft) with meter as the default unit. To switch the unit to foot, go to the product settings in the app. When switching the unit, make sure the laser measure is on and the Bluetooth is connected to the app. Warning!
Read the safety and operating instructions carefully before using the laser measure for the rst time. Read the safety and operating instructions carefully before use. Failure to use the laser measure in accordance with the instructions indicated by this user manual will lead to damage to the laser measure, decreased measurement accuracy, or injuries to users or other people. 8D17313E Care & Maintenance Do not store or use the laser measure for a long time in places where the temperature or humidity is high. When planning not to use the laser measure for a long time, store it in environments with normal ambient temperatures and humidity, and charge the laser measure every 6 months. Keep the surface of the laser measure clean. Dust can be wiped away from the surface with a soft, damp cloth, and do not use corrosive liquids to clean the laser measure. You can wipe the laser emitting lens and the laser reception lens clean in the same way as you wipe the optical devices. Federal Communications Commission Suppliers Declaration of Conformity This suppliers declaration of conformity is hereby for All products bearing this symbol are waste electrical and electronic equipment
(WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points. We Shanghai HOTO Technology Co., Ltd., hereby, declares that this equipment is in compliance with the applicable Directives and European Norms, and amendments. The full text of the EU declaration of conformity is available at the following internet address:
http://www.mi.com/global/service/support/declaration.html Product: Xiaomi Smart Laser Measure Model Number(s): MJJGCJYD001QW Brand/Trade: Xiaomi We declare that the above mentioned device has been tested and found in compliance with CFR 47 Part 15 Regulation. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Responsible Party U.S. Contact Information Company: TEKMOVIL LLC Address: 601 BRICKELL KEY DR #723 Miami, FL 33131 Country: U.S.A. Telephone No.: +1(312)282-5246 Internet contact information: kim.peterson@tekmovil.com Representative of Responsible Party for SDoC Company: Shanghai HOTO Technology Co., Ltd. Address: Building 45, No.50 Moganshan Road, Putuo District, Shanghai, China Country: China Telephone No.: 400-021-8696 FCC Warning:
Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. IC Warning:
RSS-Gen Issue 3 December 2010"&"CNR-Gen 3e ditionDcembre 2010:
English:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. French:
Le prsentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareildoit accepter tout brouillageradiolectriquesubi, mmesi le brouillageest susceptible d'encompromettre le fonctionnement. Refer to the following table for general errors you may encounter during use and methods to solve them. Error Cause Solution The battery level icon blinks. Couldn't measure and the display shows "-.---". Err01 Err02 The battery level is low. Charge the laser measure. The laser reective signal is too weak (such as when measuring black surfaces). The laser reective signal is too strong (such as when measuring highly reective surfaces). Out of measurement range. Measure a target with high reectivity or use the laser measure with a reective board. Measure a target with low reectivity or use the laser measure with a reective board. Use the laser measure within the measurement range. Move the laser measure too quickly when measuring. Slowly move the laser measure or keep it stable. Couldn't emit the laser light due to the low battery level. Charge the laser measure. Out of the operating temperature range. Use the laser measure within the specied temperature range.
-5 Model: MJJGCJYD001QW Measurement Range: 0.05*40 m Measurement Accuracy: (3 mm+510 D*
Minimum Displaying Unit: 0.001 m Measurement Unit: m/ft Laser Type: 630680 nm wavelength Lithium-ion Battery: 3.7 V 370 mAh Display Screen: 1.23-inch LCD screen Bluetooth Transmission Distance:
Approx. 8 m (without obstacles) Charging Specication: 5 V 1 A Operating Power: 0.7 W (Max.) Charging Time: Approx. 100 min Automatic Turn-o Time: 180 s Automatic Laser O Time: 180 s Operating Temperature: -10C to 50C Storage Temperature: -20C to 60C Storage Humidity: 20%80% RH Item Dimensions: 80 35 21 mm Net Weight: Approx. 60 g
*To measure the minimum value of the measurement range, use the front-based mode.
* "D" refers to the actual distance in an indoor environment with standard reective surfaces. The measuring values may be inaccurate if the laser measure is used in the following conditions: extremely strong sunlight, erratic uctuation of ambient temperature, weak reection eect of the target surface, and low battery level. In this case, you can use the laser measure with a reective board for a more accurate result. Besides, the following situations may also aect the measurement accuracy: object lenses or the laser tube are blocked; the measurement target is not clear, such as when measuring water surface, glass, or mirror; the laser light jitters during measurement and so on. CMIIT ID2021DP6853 Manufactured for: Xiaomi Communications Co., Ltd. Manufactured by: Shanghai HOTO Technology Co., Ltd.
(a Mi Ecosystem company) Address: Building 45, No.50 Moganshan Road, Putuo District, Shanghai, China For further information, please go to www.mi.com User Manual Version: V1.0 Troubleshooting Specications 2 3 4 5 6 7 8 9 10 11 12 13 14 70mm 5 1 2 3 4 5 Laser Emitting Lens Laser Reception Lens Display Power/Measure Button Type-C Charging Port 3 4 1 _ V1.5 20210924 105g 1. V1.1 2. V1.2 3. 8 V1.3 4.The Mi Home/Xiaomi Home app (version6.7.200 or later) is only compatible with iOS 10.0 or above. The Mi Home/Xiaomi Home app that the laser measure is connected to requires version 6.9.200 or later. Please update it if necessary. V1.4 5. V1.5