LT700H RTK ANDROID TABLET User Guide Mapping & Geospatial | October 2019 Make your work more efficient Table of Content Table of Content Table of Content ............................................................................................................... 2 Preface ............................................................................................................................ 4 Copyright ........................................................................................................................... 4 Safety Warnings ................................................................................................................. 4 FCC Interference Statement .............................................................................................. 4 CE Interference Statement ................................................................................................ 5 1 Introduction .............................................................................................................. 6 1.1 Technical Assistance .................................................................................................... 6 1.2 Your Comments ........................................................................................................... 6 1.3 Safety Information ....................................................................................................... 6 1.4 Warning and Cautions ................................................................................................. 6 1.5 Use and Care ................................................................................................................ 7 2 Overview .................................................................................................................. 8 2.1 Features ....................................................................................................................... 8 2.2 Specifications ............................................................................................................... 9 2.3 Front View ................................................................................................................. 10 2.4 Back View ................................................................................................................... 12 2.5 Top ............................................................................................................................. 12 2.6 Bottom ....................................................................................................................... 13 2.7 Installation ................................................................................................................. 14 3 Basic Operation ....................................................................................................... 14 3.1 Insert SIM Card and Power On .................................................................................. 14 3.2 Language & Input ...................................................................................................... 16 3.3 Set Date & Time ......................................................................................................... 16 3.4 Display ....................................................................................................................... 17 3.5 Wi-Fi ........................................................................................................................... 19 3.6 Bluetooth ................................................................................................................... 20 3.7 USB Connection ......................................................................................................... 21 3.8 Use Camera ................................................................................................................ 22 3.9 Log in 4G .................................................................................................................... 23 3.10 Location ................................................................................................................... 24 3.10.1 Turn on The Location Service........................................................................ 24 3.10.2 Select the Constellation Combination .......................................................... 24 3.11 Checking the IMEI Number of The Device ............................................................... 25 3.12 Edit F1/F2 Function Key ........................................................................................... 26 CHCNAV LT700H GNSS USER GUIDE | 2019-10 P a g e | 2 Table of Content 4 Getting Start with LandStar 7 ................................................................................... 27 4.1 LandStar7 Installation ................................................................................................ 27 4.2 Connect the LT700H to internet ................................................................................ 28 4.3 Create a project ......................................................................................................... 28 4.4 Connect to the LT700H GNSS Module ....................................................................... 34 4.5 CORS / RTK Network Correction Login ...................................................................... 35 4.6 Survey ........................................................................................................................ 38 4.7 Sky Plot ...................................................................................................................... 40 CHCNAV LT700H GNSS USER GUIDE | 2019-10 P a g e | 3 Preface Preface Copyright Copyright 2019 Trademarks holders. CHCNAV | Shanghai Huace Navigation Technology Ltd. All rights reserved. The CHCNAV and CHC Navigation are trademark of Shanghai Huace Navigation Technology Limited. All other trademarks are the property of their respective owners. All product and brand names mentioned in this publication are trademarks of their respective Safety Warnings The Global Positioning System (GPS) is operated by the U.S. Government, which is solely responsible for the accuracy and maintenance of the GPS network. Accuracy can also be affected by poor satellite geometry and obstructions, like buildings and heavy canopy. FCC Interference Statement This equipment has been designed to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules in the Portable Mode. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. CHCNAV LT700H GNSS USER GUIDE | 2019-10 P a g e | 4 Preface CE Interference Statement Declaration of Conformity: Hereby, Shanghai Huace Navigation Technology Ltd. declares that this LT700H is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. A copy of the Declaration of conformity can be found at Shanghai Huace Navigation Technology Ltd. CHCNAV LT700H GNSS USER GUIDE | 2019-10 P a g e | 5 Introduction 1 Introduction Thank you for choosing CHCNAV LT700H GNSS RTK Tablet. This user guide will provide useful information about your receiver. It will also guide you through your first steps of using LT700H in the field. If you have a problem and cannot find the information you need in the product documentation, contact your local dealer from which you purchased the LT700H. Alternatively, please request technical support using the CHCNAV Website (www.chcnav.com) or CHCNAV technical support 1.1 Technical Assistance email (support@chcnav.com). 1.2 Your Comments 1.3 Safety Information requirements. 1.4 Warning and Cautions Your feedback about this Getting Started Guide will help us to improve it in a future revision. Please e-mail your comments to support@chcnav.com. This manual describes CHCNAV LT700H RTK Tablet. Before using the LT700H, please make sure that you have read and understood this Getting Started Guide, as well as the safety This device complies with Part 15 of the FCC Rules. The operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Absence of specific alerts does not mean that there are no safety risks involved. Make your work more efficient Introduction A Warning or Caution information is intended to minimize the risk of personal injury and/or damage to the equipment. WARNING - A Warning alerts you to a potential misused or wrong setting of the CAUTION - A Caution alerts you to a possible risk of serious injury to your person and/or equipment. damage to the equipment. 1.5 Use and Care The LT700H is designed to withstand the rough environment that typically occurs in the field. However, the LT700H is high-precision electronic equipment and should be treated with reasonable care. Make your work more efficient Overview LT700H is a high-end GNSS RTK tablet under Android 8.1 OS. Its dust and waterproof level is IP67 and it can survive 1.5 m fall onto concrete. With 8000 mAh Li-ion battery, it can continuously work up to 12 h. The LT700H tracks GPS + GLONASS + GALILEO + BEIDOU (for details refer to 3.10.2 Select the Constellation Combination.) 2 Overview 2.1 Features Operating System Item CPU RAM Flash Memory Memory Extend GNSS Accuracy Channel Cold Start Warm Start WIFI Cellular Modem Bluetooth USB Li-ion Battery Voltage Battery Life Charging Time Front Camera Back Camera Flashlight Specification Android 8.1 8-core 2.2 GHz 4 GB 64 GB 184 30 s 1s V4.1 Type C/OTG 8000mAh 3.8V Micro SD, up to 128G Support GPS, GLONASS, BDS and GALILEO 0.05 m HRMS with RTCM 3.2 corrections 802.11 a/b/g/n/ac TDLTE, TDSCDMA, EVDO, GSM, WCDMA 12 h (continuous work) 4.0 h (5V, 2A); 3.0h (9V/12V, 2A) 5 megapixels 16 megapixels Integrated Make your work more efficient Overview 2.2 Specifications Physical specifications Display Size: 8" IPS Glass touch screen Resolution: 1920 x 1200 Brightness: 450 cd/m2 Touch screen: Capacitive touch, 10 points touch screen, waterproof, gloves-supported Point touch pen: Mapping pen with high degree of accuracy Screen technology: IPS display panel Corning Gorilla Glass 3 Physical Dustproof and waterproof: IP67 Shock: Survives a 1.5 m drop onto concrete Humidity: 5% - 95% RH (without condensation) Dimension: 240 mm*151 mm* 32 mm (L*W*H) (including module) Weight: 675 g (with battery and module) Operating temperature: -20 C to +60 C Storage temperature: -30 C to +70 C Sensors NFC: Support G-sensor: Support Light sensor: Support Distance sensor: Support E-compass: Support Gyroscope: Support Make your work more efficient Overview Precision Helical GNSS Antenna Front Camera 2.3 Front View Volume Power Button Power On/Off Menu Return Homepage F1/F2 Function Power on: Press the button for 1-2 seconds, the Power Indicator will turn on and the boot screen will appear. The LT700H will enter the operating system after 30 seconds. Power off: Press the button for 1-2 seconds, the [SELECT] dialogue box will pop up, select
[Power off] to turn off the device. Make your work more efficient Overview Return: Press the button to go back to the last menu. Menu Button Homepage Click this button to bring out the start menu. Use the Homepage button to the main menu. F1/F2 Function Button This key is a shortcut key to the preset function or menu. USB Type C using a USB cable. Volume button These two buttons are used for increasing / decreasing the volume. This interface is used for battery charging and data transmission between LT700H and PC by Make your work more efficient 2.4 Back View Overview 2.5 Top GNSS Antenna Connector Make your work more efficient 2.6 Bottom Overview The tablet has a internal rechargeable Lithium-ion battery, charge the battery completely before using it for the first time. To charge the battery, please connect to the AC power via the USB cable and power adapter. WARNING - Charge the battery only in strict accordance with the instructions. Charging or using the battery in unauthorized equipment or in a wet environment can cause an electric short and damage to the tablet. Do not insert any object into the charging port, it can result in damage to the charging port. To prevent injury or damage:
Charge the battery only in CHC authorized equipment. Be sure to follow all instructions that are provided with the battery charger. Discontinue charging a battery that gives off extreme heat or a burning odor. The operation system has short circuit proof design, a pop-up warning will show up if its short-
circuited (as shown below), please unplug the charger and check the charging port, USB cable and power adapter. Please note: If no action is taken while the warning shows up, this would also result in damage Make your work more efficient USB Type-C Charging/Data Interface Basic Operation to the charging port. 2.7 Installation SIM Card Slot Micro-SD Card Please insert the SIM card and the MicroSD card in the direction of the diagram. 3 Basic Operation 3.1 Insert SIM Card and Power On Refer to 2.7 Installation to find the SIM card and TF card slot, and then insert the cards into slots correctly. Before powering on LT700H, please make sure to fully charge the battery. Then long press the power button to turn on LT700H and enter its home screen. Click to make a phone call. Click to access contacts information. Click to open a message. Click to open a browser. Make your work more efficient Basic Operation Click to go back to the previous menu. Click to return home screen. Click to see all the running apps and then you can close them by sliding them right or left. After powering on LT700H, click SettingsNetwork & InternetSIM cards to turn on the SIM cards. Make your work more efficient Basic Operation 3.2 Language & Input Click [Settings] [System]- [Language & input] [Language] to select language. If you have not found the language you want to choose, click [Add a language] to find the target language. 3.3 Set Date & Time Click [Settings] [System]- [Date & time] and enter [Date & time] interface. Make your work more efficient Basic Operation If you want to set date and time by yourself, please turn off the Automatic date & time first and then click Set date and Set time to start your settings. You can also customize your time zone and choose whether to use the 24-hour format in this interface. 3.4 Display Click [Settings] [Display] to enter Display interface. Click Advanced to view all the options. Make your work more efficient Basic Operation Brightness adjusting: Click Brightness level to adjust it according to your preference. Sleep: Click to optimize the inactivity time LT700H needs to close the screen. Font size: Click Font size to enter Font size interface and then Slide the green dot to change the font size. Make your work more efficient Basic Operation 3.5 Wi-Fi Click [Settings] [Network & Internet] [Wi-Fi] to switch on the button. Select Wi-Fi and type in its password to connect. After connecting Wi-Fi, the Network info can be checked. Make your work more efficient Basic Operation 3.6 Bluetooth Click [Settings] [Connected device] [Bluetooth] to turn on the Bluetooth. Find nearby devices and pair with it. Make your work more efficient Basic Operation 3.7 USB Connection For connection or data transmission between LT700H and PC, please use the USB data cable as shown below. Click [Settings] [System] [Developer options] [USB debugging] to make sure this function is switched on. After USB data cable connecting with PC, wait until the Allow USB debugging dialogue pops up, and then click OK. You can also use third party software to manage the documents and data stored in LT700H and install software like GNSS Tool into it. Make your work more efficient Basic Operation 3.8 Use Camera Make sure that the battery is charged and installed in the receiver. Click to select recording the video or panorama mode. Click to take a photo. Camera Settings Make your work more efficient Click to configure related parameters. Basic Operation 3.9 Log in 4G After inserting your SIM card, click [Settings] [Network & Internet] [Mobile Networks]
[Advanced] [Preferred network type] and select corresponding network type of your SIM card. Then turn on Mobile data and click Data usage to see data usage. Make your work more efficient Basic Operation 3.10 Location 3.10.1 Turn on The Location Service Click [Settings] [Security & Location] [Location] [On] to switch on location service. 3.10.2 Select the Constellation Combination On the [Location] panel, the choose [Location Mode], and the user can choose the constellation/constellations. Make your work more efficient Basic Operation For LT700H, there are six options:
ALL: The device will use all data to do the positioning. Note that this is the recommended setting to achieve optimal positioning performances. GPS+BDS+GALILEO: The device will use GPS, BDS and GALILEO data;
GPS+GLONASS+GALILEO: The device will use GPS, GLONASS and GALILEO data;
GPS+GALILEO: The device will use GPS, GALILEO data;
GPS: The device will use GPS data BDS: The device will use BDS signal only;
GLONASS: The device will use GLONASS signal only;
3.11 Checking the IMEI Number of The Device Turn the LT700H on and enter the dialing panel, tap *#06#, the IMEI numbers show up automatically. Make your work more efficient Basic Operation 3.12 Edit F1/F2 Function Key The F1/F2 Function Key can be edited to launch the APPs in the device. Enter the edit interface via [Settings] [System] [Gestures] [F1 F2 Function Key]. Check the APP for corresponding function key in [F1 Settings] / [F2 Settings]. Make your work more efficient Getting Start with LandStar 7 4 Getting Start with LandStar 7 4.1 LandStar7 Installation 1. Open Google Play store and search for LandStar 7 2. Click [Install] and the installation process start;
Make your work more efficient 3. Wait for the installing, and the APP installed shows up when the installation finished. Getting Start with LandStar 7 4.2 Connect the LT700H to internet Please select Wi-Fi or mobile network to enable Internet to allow a connection to your GNSS RTK Corrections Service provider. 4.3 Create a project
(1) Power on the LT700H: Long press the power button for 3-5 seconds.
(2) Launch the LandStar 7 software. Make your work more efficient Getting Start with LandStar 7
(3) Tap [Projects] - [Project] to create or open a project.
(4) Tap [New] to create a new project. Make your work more efficient Getting Start with LandStar 7
(5) Input the project name, author and the time zone of working region.
(6) Tap [Coordinate System] to choose the coordinate system of the project.
(7) Tap [Add] to add pre-define coordinate system in the list. Make your work more efficient Getting Start with LandStar 7
(8) Select the continent and region according to your working area.
(9) Select the proper coordinate system to use.
(10) Tap [Select] to confirm.
(11) Selected coordinate system is available in the pre-define list, tap [Select] to confirm. Make your work more efficient Getting Start with LandStar 7
(12) Check the parameters of the coordinate system and tap [Accept] to confirm. Make your work more efficient Getting Start with LandStar 7
(13) Tap [OK] to finish the project setting. Make your work more efficient Getting Start with LandStar 7 4.4 Connect to the LT700H GNSS Module
(1) Tap [Config] - [Connect].
(2) Select Manufacturer as [CHC], Device Type as [Local], Device Name as [LT700H], Connection Type as [Local]. Make your work more efficient
(3) When connected to the LT700H GNSS, the message Connected to receiver! appears. Getting Start with LandStar 7 4.5 CORS / RTK Network Correction Login
(1) Tap [Config] - [Work Mode] to create or accept a work mode. Make your work more efficient
(2) Tap [New] to create a new work mode. Getting Start with LandStar 7
(3) Select the work mode as [Auto Rover], datalink as [PDA Network], protocol as [Ntrip], type in the corresponding Ntrip [IP] and [Port]. Tap [Download] button to load the mountpoints source table.
(4) Input the username and password of your NTRIP account. Note: If the selected mountpoint does not contain the RTCM 1021 - 1027 messages, leave the related RTCM message setting buttons set to NO. Make your work more efficient
(5) Tap [Save]. Getting Start with LandStar 7
(6) Input the name of the new work mode and tap [OK]. Make your work more efficient
(7) Select the new work mode in the [Work Mode List] and tap [Accept]. Getting Start with LandStar 7
(8) Check the information of NTRIP account and change it as need. Tick on Correct, [Dont remind me next time] when there is nothing need to change.
(9) Click [Ok]. 4.6 Survey
(1) Wait until the software shows [RTD], [Float] or [Fix], which means the LT700H is using the Make your work more efficient Getting Start with LandStar 7 GNSS correction data from RTK Network.
(2) Tap the [Survey] - [Map] to start your work.
(3) Tap [Survey] icon to collect the points. Make your work more efficient Getting Start with LandStar 7 4.7 Sky Plot Click Sky Plot and see how many satellites (including GPS, GLONASS, BDS, GALILEO and SBAS) the device is currently tracking. Make your work more efficient CHC Navigation Building D, NO. 599 Gaojing Road, Qingpu District, 201702 Shanghai, China Tel: +86 21 542 60 273 | Fax: +86 21 649 50 963 Email: sales@chcnav.com | support@chcnav.com Skype:
chcnav_support Website: www.chcnav.com This document is intended for general information purposes only. It does not consider the readers specific circumstances and environmental constraints of use of GNSS Make your work more efficient 1) FCC 15.19 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2FCC 15.21 Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. 3) FCC 15.105 For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) information:
This Smart Phone meets the government's requirements for exposure to radio waves. The guide lines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Smart handheld printer (FCC ID: SY4-B01014 ) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification is 1.28W/kg when properly worn on the body. This device was tested for typical body-worn operations with the back of the Smart Phone kept 00mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 00cm separation distance between the user's body and the back of the Tablet PC. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. very high volume, prolonged listening to a mobile phone can damage your hearing.