FCC ID: SY4-B01015 Handheld GNSS Data Collector

ShangHai HuaCe Navigation Technology Ltd. 599 Gaojing Road,Building D, Shanghai, 201702, China HCE600 GNSS Data Controller User Guide Revision 1.0 19/08/2021 Shanghai HuaCe Navigation Technology Ltd. Introduction This user guide describes in detail how to install, configure and use the HCE600; the description of the operation process is clear and simple, so that users can easily, quickly and accurately get familiar of this controller. Experience requirements In order to be able to use HCE600 better, CHCNAV recommends to read this user guide carefully before using this product. If you are not familiar with the HCE600 principle, please contact support@chcnav.com for more details. Disclaimer Before using this product, please make sure you read the user guide carefully for better use of this product.CHCNAV will not be responsible for any damage caused by the operation without following the requirements of this document, or the misuse of this document without proper understanding of the requirements of this document;

however, we will strive to continuously improve the functions and performance of the product, improve the quality of service, and reserve the right to change, optimize and improve the content of the instruction manual, and regularly inform the content in the form of upgrade release. Please pay attention to the latest information released on our official website (www.chcnav.com). Your suggestions If you have questions, you can contact local supplier or send email to support@chcanv.com. Table of Contents Introduction ................................................................................................................... 2 Experience requirements ............................................................................................... 2 Disclaimer ....................................................................................................................... 2 Your suggestions ............................................................................................................ 2 Table of Contents ........................................................................................................... 3 1. Introduction ............................................................................................................... 4 1.1 Introduction ..................................................................................................... 4 1.3 Adapter Notes .................................................................................................. 5 2 Installation Guide ........................................................................................................ 5 2.1 Appearance ...................................................................................................... 5 2.2 Install Micro SD, SIM card ................................................................................ 6 2.3 Battery charging ............................................................................................... 6 2.4Button and function area display ...................................................................... 6 3 Telephone function ..................................................................................................... 8 3.1 Make a phone call ............................................................................................ 8 3.2 Address book .................................................................................................... 9 3.3 SMS and MMS ................................................................................................ 10 4 multimedia ................................................................................................................ 11 4.1 Camera ........................................................................................................... 11 4.2 Gallery ............................................................................................................ 12 4.3 Music .............................................................................................................. 13 5 Exception handling .................................................................................................... 13 5.1 Power on abnormal mode ............................................................................. 13 5.2 Handbook dead status ................................................................................... 14 Product Specifications .................................................................................................. 15 Equipment Remarks ..................................................................................................... 17 Affirm ........................................................................................................................... 18 1. Introduction 1.1 Introduction CHCNAV HCE600 is a high-performance intelligent handheld terminal developed by Shanghai Huace Navigation Technology LTD. The HCE600 incorporates powerful navigation features with improved sensitivity, helping to achieve more accurate and faster location services. Powered by Android 10.0 OS with 2.0GHz quad-core processor, it has a long battery life. 1.2 Battery Notes Do not allow the battery to sit idle for too long, either in product equipment or in storage. If the battery is 6 months old, check the state of charge or dispose of the battery properly. Lithium-ion batteries typically have a life of two to three years and 300 to 500 cycle charges. A full charge cycle is a complete charge, a complete discharge, and then a complete charge. Rechargeable lithium-ion batteries have a limited life span and gradually lose their ability to hold a charge. This amount of loss (aging) is unchangeable. When the battery loses capacity, the service life is reduced (run time). The lithium-ion battery continues to slowly (automatically) discharge when it is not being used or when it is idle. Check the battery charge status frequently, or refer to the instruction manual for information on how to charge the battery. Observe and record a battery that is unused and fully charged. Based on new battery run time, compared to a battery with longer run time. Battery runtime will vary depending on product configuration and application. Check the battery charge status regularly. The battery charge time increases significantly as the battery runtime drops below approximately 80% of the original runtime. If the battery is left idle or unused for a long period of time, you need to check if it still has a charge and if the battery has any charge left, do not try to charge it or use it. Should have gotten a new battery. Remove the battery and place it separately. Battery storage temperature from 5C to 20C (41F to 68F) Note: Replacing batteries with the wrong type poses a risk of explosion, so be sure to dispose of used batteries according to the instructions. 1.3 Adapter Notes Products are shipped without adapters, if consumers use power adapters to supply power, they should purchase power adapters that meet the requirements of the corresponding safety standards or power adapters that have obtained CCC certification 2 Installation Guide 2.1 Appearance 2.2 Install Micro SD, SIM card The locations of the card slots are as follows. SIM TF 2.3 Battery charging Charge the battery via the USB port using the original adapter, do not use other brand adapters to charge the device. 2.4 Button and function area display The HCE600 device is divided into 1 side button and 1 power button and 23 main buttons on the keys. Side button Main keypad Keyboard commands Keypad Instruction Locate button On right side of device, use for APP locating. Power button Turn on/off device Main keypad Standard function keypads APP button Quickly open customized app 3 Telephone function 3.1 Make a phone call Click

. Tap the number keys to enter the telephone number. Tap to dial. Tap to end the call. 3.2 Contacts Click Contacts to open the contacts list. Click to add the new contact. 3.3 SMS and MMS Click to open the message list. Click to type text message to input the content. Click to add photos, videos. You can turn on your camera and capture every moving moment at any time. Photographic interface. 2 5 4 4 Multimedia 4.1 Camera 1 3 1. Click to switch the photo mode. 2. Click to switch the flash mode. 3. Click to check photos or videos. 4. Click to take a photo. 5. Click Video to switch to video, click start recording. 4.2 Gallery Users can view photos and videos through the gallery. View pictures and video 1. In the pull-up menu, click

. 2. Select the folder of images to view. 3. Click on the image or video to view it full screen. Show slide 1. In the pull-up menu, click

. 2. Select the folder of images to view. 3. Click and select to broadcast the slideshow. Edit photos Delete image 1. In the pull-up menu, click

. 2. Select the folder of pictures you want to view. 3. Select a picture, touch the picture, click

, you can start editing the picture. 1. In the pull-up menu, click

. 2. Select the folder of pictures you want to view. 3. Select a picture, click

, and then click Delete to delete the picture. Share pictures and videos You can share pictures and videos via email, Bluetooth, and many other ways. 1. In the pull-up menu, click

. 2. Select the folder of pictures you want to view. 3. Select a picture, click

, and you can finish sharing the picture and video. 4.3 Music The controller has a built-in music player, so you can play your favorite songs whenever you want. Add music Before playing the music, users need to copy the music files to the controller, as following shows:

1. Copy via USB connection cable to a computer. 2. Download via the Internet. 3. Copy the music files to the controller via USB cable or bluetooth connection. Play music 1. In the pull-up menu, click

. 2. Click the Song button to select the song you want to play. 3. Go to the player interface and enjoy the music. 5 Trouble shooting 5.1 Abnormal power on If you encounter an abnormal boot situation, as shown below, the phenomenon is caused by triggering the Power button + number 1 + number 6 at the same time to enter Recovery mode, you can use the key on the keyboard to move to the Normal Boot option, press OK key to confirm the boot. After reboot you need to check whether the side buttons are back to normal. If the side buttons do not rebound properly, please contact your local supplier. If you accidentally enter Recovery Mode and select Fastboot Mode to reboot, as shown below. Just press and hold the power button for 11 seconds to force a reboot. If you accidentally enter Recovery Mode, you select Recovery Mode to reboot, as shown below. Just press and hold the power button for 11 seconds to force a reboot. 5.2 Hang up If you get stuck and jammed during system use and cannot perform touch screen operations, you can restart by long pressing the power button for 11 seconds. Product Specifications Size Weight Display screen Keypads Battery Storage Expansion Equipment parameters 224mm*80mm*15.4mm 340g 5.45", HD+ 1440 x 720 pixel resolution PowerNumeric Keypad Rechargeable Li-Polymer Battery 6240mAh Pistol bat. (rechargeable li-ion polymer, 3.7V, 5200 mAh) Micro-SD/TF (supports up to 128GB) Expansion Card Slot 1 Nano SIM card slot Sound frequency Microphone, speaker (1W), voice call support As the circumstances allow Sensors Screen brightness 13 megapixels, flash support, continuous snapshot mode Gravity Sensor, Gyroscope, Electronic Compass, Light and Proximity Sensor 500 nits maximum brightness (typical) Touchscreen Asahi Glass, multi-touch support, glove or wet hand operation Performance Parameters CPU MTK6762 2.0GHz Octa-core Operating System AndroidTM 10 Running memory 3GB Data transmission USB2.0 Type-C,OTG Storage 32GB Storage Expansion Support 128GB Micro-SD Working environment Operating temperature

-20~+50 Storage temperature

-55~+85 Ambient humidity 5% RH - 95% RH (no condensation) Drop height Drop height 1.5 m, 6 sides, 4 corners, 2 times each side, two cycles. Platen Waterproof and dustproof Rolling 1000 consecutive times 0.5m, stable operation even after 6 face contact surface rolls, meeting IEC rolling specifications. IP67 rating according to IEC 60529 (1m deep long stationary bucket, handpiece in water, distance from bottom of sample to water surface at least 1m, immersion time at least 30min.) immersed Static Protection CLASS 4 rating Air type: 15KV Contact type: 8KV WWAN wireless connection 2G: GSM850/GSM900/DCS1800/PCS1900 3G: CDMA EVDO: BC0 WCDMA: B1/B2/B4/B5/B8 TD-SCDMA: A/F(B34/B39) 4G: B1/B2/B3/B4/B5/B7/B8/B12/B17/B20/B28AB/B38/

B39/B40/B41 WLAN IEEE802.11 a/b/g/n/ac, (2.4G/5G) Bluetooth Bluetooth v5.0 NFC Backing Equipment Remarks Restrictions. BE FI LV RO AT EE IT PT BG FR LT SK HR DE LU SI CY GR MT ES CZ HU NL SE DK IE PL UK The European version of the device is limited to indoor use in European communities using frequencies from 5150MHz-5350MHz to reduce the potential for interference. Declaration Equipment declaration:

Ltd. hereby affirms that the radio equipment model HCE600 complies with the Directive 2014/53, EU, and the full text of the EU conformity declaration is available on the official website: https://www.chcnav.com/. 1) FCC 15.19 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2FCC 15.21 Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. 3) FCC 15.105 For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual:

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) information:

This Smart Phone meets the government's requirements for exposure to radio waves. The guide lines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement:

The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Smart handheld printer (FCC ID: SY4-B01015) has also been tested against this SAR limit. During product certification, the maximum SAR value reported according to this standard is less than 1.6W/kg when correctly worn on the vehicle body. This device was tested for typical body-worn operations with the back of the Smart Phone kept 0cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0cm separation distance between the user's body and the back of the Tablet PC. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. very high volume, prolonged listening to a mobile phone can damage your hearing.

FCC ID: SY4-B01015 Handheld GNSS Data Collector Model No.: HCE600 Size: 4.0cm *1.5cm Label Location

Shanghai Huace Navigation Technology Ltd. Building D, 599 Gaojing Road, Qingpu District, Shanghai, China Date: 2021-11-08 FCC ID: SY4-B01015 Software Operation Description We, Shanghai Huace Navigation Technology Ltd. hereby declare that requirements of Handheld GNSS Data Collector have been met and shown on the following question. SOFTWARE SECURITY DESCRIPTION General Description 1. Describe how any Software/firmware will be obtained by the factory, downloaded from the ODM website, and installed by the end user. Software is accessed through Web UI when computer is connected. software/firmware updates for elements than can affect the devices RF parameters will be obtained, downloaded, validated and installed. For software that is accessed through manufacturers website or devices management system, describe the different levels of security as appropriate. 2. Describe the RF parameters that are modified by any software/firmware without any hardware changes. Are these parameters in some way limited such that any other software/firmware changes will not allow the device to exceed the authorized RF characteristics?

3. Describe in detail the authentication protocols that are in place to ensure that the source of the RF-related software/firmware is valid. Describe in detail how the RF-related software is protected against modification. 4. Describe in detail any encryption methods used to support the use of legitimate RF-related software/firmware. The RF parameters cannot be modified by software. All these parameters will not exceed the authorized parameters. The firmware has been complied as binary file. It couldnt change the setting RF parameter through this binary file. It is read-only without change. No any authentication protocol is used. The RF Parameters is put in read-only partition of EUTs flash and are only installed in the factory. RF parameters including frequency of operation, power setting, modulation type, antenna types or country code setting will be locked in this partition. No encryption methods used. 5. For a device be configured as a master and client

(with active or passive that can This is a client device without Radar detection. Third-Party Access Control scanning), explain how the device ensures compliance for each mode? In particular if the device acts as master in some band of operation and client in another; how ensured operation?

in is each compliance of band 1. Explain if any third parties have the capability to operate a U.S.-sold device on any other regulatory domain, frequencies, or in any manner that may allow the device to operate in violation of the devices authorization if activated in the U.S. 2. Describe, if the device permits third-party software or firmware installation, what mechanisms are provided by the manufacturer to permit integration of such functions while ensuring that the RF parameters of the device cannot be operated outside its authorization for operation in the U.S. In the description include what controls and/or agreements are in place with providers of third-party functionality to ensure the devices underlying RF parameters are unchanged and how the manufacturer verifies the functionality. 3. For Certified Transmitter modular devices, describe how the module grantee ensures that host manufacturers fully comply with these software security requirements for U-NII devices. If the module is controlled through driver software loaded in the host, describe how the drivers are controlled and managed such that the modular transmitter RF parameters are not modified outside the grant of authorization. No any third parties have the capability to operate a US sold device on any other regulatory domain, frequencies, or in any manner that may allow the device to operate in violation of the devices authorization if activated in the U.S. The RF Parameters is put in read-only partition of EUTs flash and are only installed in the factory. RF parameters including frequency of operation, power setting, modulation type, antenna types or country code setting will be locked in this partition. User couldnt change channel for UI, so user has no way to break compliance on our device. SOFTWARE CONFIGURATION DESCRIPTION GUIDE For devices which have User Interfaces (UI) to configure the device in a manner that may impact the operational RF parameters, the following questions shall be answered by the applicant and the information included in the operational description. The description must address if the device supports any of the country code configurations or peer-peer mode communications discussed in KDB 594280 Publication D01. SOFTWARE CONFIGURATION DESCRIPTION USER CONFIGURATION GUIDE 1. Describe the user configurations permitted through the UI. If different levels of access are permitted for professional installers, system integrators or end-users, describe the differences. a. What parameters are viewable and configurable by different parties?

b. What parameters are accessible or modifiable by the professional installer or system integrators?

(1) Are the parameters in some way limited, so that the installers will not enter parameters that exceed those authorized?

(2) What controls exist that the user cannot operate the device outside its authorization in the U.S.?

Authorized channel, bandwidth, and modulation can be configured through the UI. There are no different levels of access. Authorized channel, bandwidth, and modulation. This is not professional install device. This is not professional install device. The RF Parameters is put in read-only partition of EUTs flash and are only installed in the factory. RF parameters including frequency of operation, power setting, modulation type, antenna types or country code setting will be locked in this partition. c. What parameters are accessible or modifiable by the end-user?

Authorized channel, bandwidth, and modulation.

(1) Are the parameters in some way limited, so that the user or installers will not enter parameters that exceed those authorized?

(2) What controls exist so that the user cannot operate the device outside its authorization in the U.S.?

This is not professional install device. The RF Parameters is put in read-only partition of EUTs flash and are only installed in the factory. RF parameters including frequency of e. What are the default parameters when the device is restarted?

Factory setting. operation, power setting, modulation type, antenna types or country code setting will be locked in this partition. Yes, the country code is set by factory. It cannot be changed in the UI. The country code cannot be changed in the UI. No, this device cannot be configured in both bridge and mesh mode. User couldnt change channel for UI, so user has no way to break compliance on our device. This device cannot be configured as different points. types of access d. Is the country code factory set?

Can it be changed in the UI?

(1) If it can be changed, what controls exist to ensure that the device can only operate within its authorization in the U.S.?

2. Can the radio be configured in bridge or mesh mode? If yes, an attestation may be required. Further information is available in KDB Publication 905462 D02. 3. For a device that can be configured as a master and client (with active or passive scanning), if this is user configurable, describe what controls exist, within the UI, to ensure compliance for each mode. If the device acts as a master in some bands and client in others, how is this configured to ensure compliance?

4. For a device that can be configured as different types of access points, such as point-to-point or point-to-multipoint, and use different types of antennas, describe what controls exist to ensure compliance with applicable limits and the proper antenna is used for each mode of operation. (See Section 15.407(a)) Signature:

Name Position Company Name Address Tel Fax Email 2021-11-08 Glenn Chu CERTIFICATION MANAGER Shanghai Huace Navigation Technology Ltd. Building D, 599 Gaojing Road, Qingpu District, Shanghai, China

+86-21-51508100

+86-21-64851208 sheng_chu@huacenav.com