W28 Ring Scanner Product Specification www.hycoiot.com W28 Series Product 2D Ring Scanner Product Specification Disclaimer All rights reserved. Disclaimer @ 2018 Shanghai Hyco Genyong Technology Co., Ltd. Please read through the manual carefully before using the product and operate it according to the manual. It is advised that you should keep this manual for future reference. Do not disassemble the device or remove the seal label from the device. Otherwise, Shanghai Hyco Genyong Technology Co., Ltd. does not assume responsibility for the warranty or replacement. All pictures in this manual are for reference only and actual product may differ. Regarding to the product modification and update, Shanghai Hyco Genyong Technology Co., Ltd. reserves the right to make changes to any software or product to improve reliability, function, or design at any time without notice. Besides, the information contained herein is subject to change without prior notice. 1 W28 Series Product 2D Ring Scanner Product Specification The products depicted in this manual may include software copyrighted by Shanghai Hyco Genyong Technology Co., Ltd. or a third party. The user, corporation or individual, shall not duplicate, in whole or in part, distribute, modify, decompile, disassemble, decode, reverse engineer, rent, transfer or sublicense such software without prior written consent from the copyright holders. This manual is copyrighted. No part of this publication may be reproduced or used in any form without written permission from Hyco. Please visit www.hycoiot.com or check the latest version of the specification sheet for the latest product information Version Information Version Date Remark V1.0 2019.12.21 V1.1 2020.01.02 V2.0 2020.7.20 Initial release Revise pictures specification inform Revise description and 2 W28 Series Product 2D Ring Scanner Product Specification Menu Overview .............................................................................................................................. 3 Product Features ............................................................................. !
Product advantage .......................................................................... !
Product demostration ...................................................................... !
How to wear ............................................................................................ !
How to charge ......................................................................................... !
Charge via W2X/SC100 cradle ....................................................... !
Charge via C20 charging station .................................................................................. 9 Replacing the ring strap .......................................................................... !
How to replace the ring strap .......................................................... !
Specifications .......................................................................................... !
Indicator light ........................................................................................... !
Vibration reminder ................................................................................... !
Scan distance specification .................................................................... !
Scan angle specification ......................................................................... !
Update scanner firmware........................................................................ !
Packing detail .......................................................................................... !
Battery Safety Guide .......................................................................................................... 21 Appendix ................................................................................................. !
Function setting barcode ................................................................. !
Common setting .................................................................................................. 23 Newline/Tab .............................................................................. !
Trigger mode setting ................................................................ !
Turn on/off identifiable symbology ........................................... !
Decode digits setting ................................................................ !
Preamble barcode output setting ........................................... !
supplemental barcode output setting .................................... !
FULL ASCII Switch .............................................................................................. 33 Bluetooth disconnect alarm setting .......................................... !
Automatic scan setting ........................................................................................ 34 3 W28 Series Product 2D Ring Scanner Product Specification Overview In addition to extract price information at the checkout counter in supermarkets, the purpose of scanning barcodes/2D codes/RFID in the express delivery, logistics, supply chain, food and drug tracing management, intelligent manufacturing and other fields is for responsibility division, which is intended to function as an electronic signature in each shift. Even though the traditional hand-held scanning machine and PDA meet the demand of responsibility division in data collecting, monitoring and tracing, they occupy one hand of the user during the whole scanning process, which negatively affects the operational efficiency. Thus, how to satisfy the need of full-scan tracing without disturbing efficiency has always been a common goal for all scientific and technological workers, as well as clients and customers. After 10 years of independent R&D, HYCO Technology has achieved the goal of handiness, comfort, and world leading Bluetooth connecting distance and reliability. Users could wear HYCO ring scanner on any finger on either hand (index finger is suggested). With a light touch on both sides of the scanner, they can complete fast scanning by aligning the crosshair cursor with the codes. Within a second, the data acquired will be sent to all kinds of devices and systems via Bluetooth. Product Features Extremely small & light: weighs only 20g with tireless long-time wearing experience Rugged quality: IP66; waterproof; crush resistance up to 3m Comfort wearing: substitutable ring straps made of sweat-proof materials to Ultra-low power consumption: world leading low power consuming technology, satisfy various sized fingers. over 8hrs battery life guaranteed. 2D code scanning: HYCOs original ultra-low power consuming 2D scanner. Supports recognitions of barcodes/2D codes on labels, craft paper, metal surfaces and screens. Stabilized Bluetooth communication: fast and stable Bluetooth data transmission;
50m communication distance in free space. Multiple protocols and communication ports: supports Bluetooth/USB/RS232 connection with any electronic devices such as smart watches, phones, laptops, PCs, POSs, IPCs, PLCs, etc. Product advantage Hands-free and efficient Omnidirectional scanning Reducing the labor intensity 4 W28 Series Product 2D Ring Scanner Product Specification Ultra-low power consumption and green Light, flexible, ease of use Reinforce brand identity with customers Recognize codes on multiple materials Rich accessories Product demonstration Ring Scanner Scan Window Left touch button Ring strap Front view Indicator Light Right touch button 5 W28 Series Product 2D Ring Scanner Product Specification Back view How to wear The wearing method of this product is shown in the picture 1 below. The product can be worn on the third joint of the index finger of the left or right hands to adapt to the tightness of the ring strap. If it feels too tight or too loose, you can replace the silicone ring strap with an appropriate size. (You can check the related content of "Replace the Ring strap" in this sheet) Touch the left or right touch button area with your thumb. The scanner emits light for barcode recognition. When the indicator light flashes green and the scanner vibrates, it means the scanning is successful. It can also be worn on other fingers, just tap the corresponding scanning area on the left and right sides. 6 W28 Series Product 2D Ring Scanner Product Specification Figure 1 How to charge Connect the charging cradle to the power source, and place the Scanner into the charging cradle as shown in Figure 2 (the scanning lens of the Scanner is upward), and then charging starts. The charging status indicator turns red to indicate that it is charging, and green to indicate that the battery is fully charged, and charging is complete. Note: Please make sure that the ring strap is pushed to the bottom of the scanner slot 7 W28 Series Product 2D Ring Scanner Product Specification In order to avoid triggering the light when taking out the Scanner from the charging cradle and directing the eyes to cause injury. Therefore, it is set that after the Scanner is charged, it needs to touch three times in a row to emit light normally. Charge via W2X/SC100 cradle W2X Charging Cradle (Bluetooth Receiver) Bluetooth Indicating LED Charging Indicating LED Figure 2 Charging Contact Point 8 W28 Series Product 2D Ring Scanner Product Specification Working Indicating LED:
Red Power-up Green In operation Charging & Bluetooth Indicating LED:
Red Charging and Bluetooth disconnection Blue Bluetooth connection, no charging or charging finished Purple Charging and Bluetooth connection Green Fully charged or no charging Charging thorugh C20 Charging Station C20 charging station Charging Indicator light Download C20 specification sheet throughhttp://www.hycoiot.com/C20.spec Picture 3 9 W28 Series Product 2D Ring Scanner Product Specification Replacing the ring strap This product is equipped with 1 silicone ring strap, and 5 different kinds of spare silicone ring straps to adapt to different finger sizes. You can contact HYCO Technology Customer Service Center to purchase additional ring straps as a spare. Figure 4 How to replace the ring strap You can complete the replacement as shown in Figure 5. When installing the ring strap, be sure to push the silicone ring strap to the end of the slot to avoid affecting the normal charging of the product. 10 W28 Series Product 2D Ring Scanner Product Specification Figure 5 ring strap havent push to the end of the slot and affects charging Figure 6 Specifications Physical characteristics Dimension Weight Material Use environment Ambient light 38.6mm*29.0mm*22.1mm ring strap not include 20gring strap not include Shell of scanner PC+ ABS Ring strap Silicone Rubber Indoor (artificial light): less than 4,842 lx Outdoor (daylight): less than 86,111 lx Working Temp.
-20 to 50 (-4 to 122) Storage Temp.
-40 to 70 (-40 to 158) humidity 0 to 95% relative humidity, non-condensing 11 W28 Series Product 2D Ring Scanner Product Specification Parameter fill-in light Aim Scan speed Scan angle White LED
"+" pattern 650nm laser diode 60 frames/sec Horizontal angle 32.5 , vertical angle 21.4 Image Sensor CMOS sensor, 1280*800 pixels Scan mode Matrix image scanning Motion tolerance At the best focal length, 13mil UPC with a movement speed of 400cm/s (157in/s) can be identified HYCO print contrast 20% HYCO reflection difference Decode Indicator Wireless barcodeCode39Code128Code93Code 11UPC/EANITF25GS1 DataBar IATA25CODEBAR 2D codesPDF417MicroPDF417Aztec Code, Data Matrix, QR Code, Micro QR Code, MaxiCode, Han Xin Code RGB LED indicator, vibration Ring Scanner : BT4.2 BLE W2X,SC100 charing cradle: USB 2.0With USB DONGLE function, it can be used as a Bluetooth adapter on the PC side;
Optional cradle charger with RS-232 or How to wear It is recommended to wear it on the left and Button method Capacitive touch on the left and right sides Ethernet interface. right index fingers 12 W28 Series Product 2D Ring Scanner Product Specification Ingress protection IP66 Within the applicable temperature range, it can withstand 12 drops from a height of 3 Anti-drop/roll-off meters to the concrete floor;
performance According to IEC 60068-2-32 standard, it can withstand more than 1,000 rolls (0.5 Antistatic ability 30 KV air static electricity, 25 KV contact Battery 3.7V, 200mAh lithium polymer battery meters) static electricity 8 hours temperature 25 full charged, vibration turned on, scanning depth of field at the best focus, periodic light recognition test, scanning once every 10 seconds, 0.5 seconds each time, can scan 6000+ times. Work time Standards Laser safety Comply with IEC60825-/EN60825-1 standard Electrical Safety UL 60950EN/IEC 60950 Comply with RoHS Environmental protection Electromagnetic/radio frequency interference FCC Part 15 Class BEN 55024/CISPR 22 AS 3548VCCI 13 W28 Series Product 2D Ring Scanner Product Specification International certification notice. CEFCC The technical specifications of this product are subject to change without Indicator status Description Red, green and blue Switch on Indicator light Short flashing green light Double flashing red light every 5 seconds The green light is on for 1 second The blue light is on for 1 second Short flashing yellow light The blue light keeps flashing and vibrates Successful scan Low power Bluetooth successful connect Bluetooth disconnect Function setting success Bluetooth disconnection prompt is turned on, and current Bluetooth is disconnected 14 W28 Series Product 2D Ring Scanner Product Specification Vibration reminder Vibration reminder function default turns on, this function can be turn on/off through scan below function code. Turn on vibration reminder Turn off vibration reminder Remind type Description Turn on the vibration function (default) 70 milliseconds. After turning on this function, if the barcode is correctly identified, it will vibrate. The vibration time is Turn off vibration Successfully scan the barcode without vibration 1 short vibration sent successfully The barcode is correctly recognized and the prompt is Continuous vibration 3 The Bluetooth is disconnected, and the barcode times information is not sent successfully 15 W28 Series Product 2D Ring Scanner Product Specification When scanning the bar code, the light-emitting surface should be perpendicular to the paper surface as a reference, within the range of the pitch deflection angle 65, and the tilt deflection angle 50, the scan line completely crosses the barcode area, and there is enough white space on Scan angle the left and right sides. 50 angle deflection 16 W28 Series Product 2D Ring Scanner Product Specification Figure 6 The scannable field of view of this product is a rectangular divergent area, with a horizontal field angle of 32.5 and a vertical field angle of 21.4. Scan Distance (this is previous to Scan Angle in the content) Barcode Barcode Near type/content density cm Farcm 17 W28 Series Product 2D Ring Scanner Product Specification Code128A UPCA 100%
123ABC 5mil 10mil 20mil 40mil 50mil 10mil 14mil 20mil 10mil 14mil 20mil 6 7.5 5.5 12 21 29 3.5 3 3 4 4 4 18.5 33.5 28.5 50 81 98 13.5 18 25 8.5 12 20 QR Code 63234604655469 Data Matrix 63234604655469 8 8 Note:
80%;
1. The average reflection difference (MRD) of the barcode is more than 2. The close distance of low density (unspecified) depends on the width of the barcode and the scanning angle;
3. Test environment temperature (25C), pitch=10, deflection=0, tilt=0, ambient light intensity: 3000lx5000lx;
4. The measurement distance is from the scanner window to the bar code surface 18 transferred;
updated. host computer;
W28 Series Product 2D Ring Scanner Product Specification Update scanner firmware This product supports two ways to update the firmware:
1. Use Android mobile devices (such as mobile phones, tablets, etc.) to update product firmware. Install the "HYCO" APK on the android device;
Open the APK and select the "software upgrade" function;
Follow the prompts to transfer the scanner firmware. When the scanner indicator flashes, it means that the upgrade firmware is being After the firmware transfer is completed, the scanner automatically installs the firmware and completes the restart. The red, green and blue indicator lights flash to indicate that the firmware has been successfully 2. Use C20 charging cabinet to update product firmware. Use the MICRO USB cable to connect the C20 charging cabinet to the Copy the ".hyc" file of the ring firmware program to the root directory of the C20 charging cabinet. When the host displays that it can be removed safely, disconnect the cable;
Use the scanner that needs to update the firmware, scan the
"Disconnect Bluetooth connection" barcode on the front of the C20 charging cabinet, the scanner will disconnect the Bluetooth connection with the original W2X charger or mobile terminal, and establish a connection with the C20 charging cabinet, scan When the gun indicator light flashes, it means the upgrade firmware is being transferred;
After a few minutes, the LED indicator flashes yellow, indicating that the firmware has been successfully updated. The software can be downloaded from the official website of Hycoiot:
19 W28 Series Product 2D Ring Scanner Product Specification www.hycoiot.com. Or contact Hao Chuang Technology Customer Support Center. Packing detail Product Qty Remark Ring Scanner W2X charging cradle SC100 charging cradle USB(5V) adapter DC-IN(5V) adapter USB cable RS232-USB cable 1 unit Ring scanner W2X charging stand: can be paired with scanning gun one to one SC100 charging stand: can be paired with two scanning guns at the same pick one of two time The default setting is USB HID mode, RS-232, Ethernet modes are optional USB charging adapter one of DC adapter pick two Optional accessories, used as RS232 serial port connection Connects cradle to computer or adapter Optional accessories, used as USB HID mode connection Connects cradle to computer Optional accessories, used as RS232 serial port connection pick one of two 20 W28 Series Product 2D Ring Scanner Product Specification Ring Strap 10 5 different size Certificate of conformity User manual 1 Certificate of conformity for the product 1 Product using guide If there is any non-compliance, please contact HYCO Technology Customer Support Center or call the customer service hotline 4006-305-758. Battery Safety Guide There should be no debris, combustibles, or chemicals in the charging area of the device. Be extremely careful when charging the device in a Please follow the battery usage, storage and charging specifications in non-commercial environment. the user guide. Improper use of batteries may cause fire, explosion or other hazards. When charging the battery of a mobile device, the temperature of the battery and charger must be between 0C and +40C (+32F to +104F). Do not use incompatible batteries and chargers. Using incompatible batteries or chargers may cause fire, explosion, leakage or other hazards. If you have any questions about the compatibility of the battery or charger, please contact Hao Chuang Technology Customer Support Center. If the device uses a USB port for charging, you should only connect the device to products that bear the USB-IF logo or have completed the USB-IF compliance program. Do not disassemble or open, squeeze, bend or twist, puncture or tear. 21 W28 Series Product 2D Ring Scanner Product Specification The heavy impact caused by any device using the battery falling on a hard surface may cause the battery to overheat. Do not short-circuit the battery, or use metal or other conductive objects to touch the battery terminals. Do not modify or transform the battery, insert foreign objects into the battery, immerse the battery in or contact with water or other liquids, or expose the battery to open flames, explosion sources, or other sources of danger. Do not place or store the equipment in or near areas that may be very hot, such as parked vehicles, radiators or other heat sources. Do not put the battery in a microwave oven or dryer. Children must use batteries under adult supervision. Please promptly dispose of used rechargeable batteries in accordance with local regulations. Do not throw the battery into fire. If the battery leaks, never let the liquid get on the skin or eyes. If it has been stained, rinse the contact area with plenty of water and seek If you suspect that the device or battery is damaged, please contact the medical attention supplier to arrange a test. 22 W28 Series Product 2D Ring Scanner Product Specification Appendix Function setting barcode Common Setting Equipment inform terminals Scan below barcode to get device inform when successful connect to Restore factory setting Scan below barcode to restore factory setting, The device will disconnect from the cradle, and the identifiable code system and Bluetooth name will be restored to the default factory settings. Restart Scan below barcode to restart device 23 W28 Series Product 2D Ring Scanner Product Specification Turn on/off vibration Scan below barcode to turn on/off vibration Turn on vibration Turn off vibration Add Enter/Tab After scan Add Enter barcode, it can automatically move to next line in the text field after each scanning. If user wants to close the function, scan Delete Enter barcode. Add Enter Delete Enter After scan "Add the tab" barcode, it can automatically move to next line in excel after each scanning. If user wants to close the function, scan "Delete the tab" barcode. 24 W28 Series Product 2D Ring Scanner Product Specification Add the Tab Delete the Tab Trigger mode setting Automatic interval scanning After scan "Automatic interval scanning" bar code, ring could automatically scan every 0.5 ~ 3 seconds without touching (2 seconds by default) Triggered continuous scanning Scan the barcode Triggered continuous scanning, ring could keep scanning when user keeps touching the ring. Manual Trigger Mode
"Manual Trigger Mode" is set by default, user needs to touch ring once to 25 W28 Series Product 2D Ring Scanner Product Specification scan once. User can switch to this model by scan below barcode. Turn on/off identifiable symbology Scanning the corresponding barcode can turn on/off the identification of different types of barcodes, and turn off unnecessary symbologies, which can reduce the error rate of barcodes and increase the scanning speed to a certain extent. Turn on/off EAN13 Turn on EAN13 Turn off EAN13 26 W28 Series Product 2D Ring Scanner Product Specification Turn on/off CODE39 Turn on CODE39 Turn on CODE39 Decode digits setting Limit the number of digits for identifying barcodes, and barcodes below the HYCO set digits/higher than the maximum set digits will not be recognized. The default length is 2 to 50 digits, the HYCO can be 1 digit, and the maximum Notes: when setting the digits of Code128 barcode, the maximum digits that can be set shall not be less than 7 digits, and the HYCO digits shall not be can be 99 digits. greater than 7 digits. Setting method:
Scan [Length Setting], select the maximum/HYCO digits of the code system to be set to set the bar code;
Scan the corresponding number in [Digital Barcode] to set the maximum/HYCO digits. (Scan tens and ones digits in order of 9 or more digits);
Scan [Confirm], confirm/cancel the length setting;
27 W28 Series Product 2D Ring Scanner Product Specification Scan [Restore factory setting] barcode switch back to default setting recognition 20 digits Sample Set Code39 code HYCO recognition 3 digits maximum HYCO CODE39 digit 3 confirm HYCO setting complete 28 maximum CODE39 Digit 2 W28 Series Product 2D Ring Scanner Product Specification digit 0 confirm Setting completed digit setting function code Code39 setting code Minimum CODE39 Minimum CODE128 29 Maximum CODE39 Code128 digit setting code W28 Series Product 2D Ring Scanner Product Specification Maximum CODE128 Digital barcode barcode Digital barcode 0 Digital barcode 1 Digital barcode 3 Digital barcode 4 30 Digital barcode 2 CODE128 W28 Series Product 2D Ring Scanner Product Specification Digital barcode 6 Digital barcode 8 Digital barcode 5 Digital barcode 7 Digital barcode 9 Confirm/cancel setting barcode Confirm length setting 31 5 7 W28 Series Product 2D Ring Scanner Product Specification Abolish length setting Preamble barcode output setting Turn on EAN13 Preamble barcode output Turn off EAN13 Preamble barcode output supplemental barcode output setting Turn on EAN13/EAN8 supplemental output Turn off EAN13/EAN8 supplemental output 32 W28 Series Product 2D Ring Scanner Product Specification Automatic EAN13/EAN8 supplemental output FULL ASCII Setting Turn on CODE39FULL ASCII Turn off CODE39FULL ASCII Bluetooth disconnect alarm setting barcode Turn on the Bluetooth disconnection alarm, which can continuously remind the operator when the Bluetooth connection has been disconnected, which is convenient for timely processing. Scan the barcode of [Turn on Bluetooth disconnect alarm] to turn on the alarm function;
Scan the barcode of [Turn off Bluetooth disconnect alarm] to turn off the alarm function;
Turn on Bluetooth disconnect alarm 33 EAN13/EAN8 W28 Series Product 2D Ring Scanner Product Specification Turn off Bluetooth disconnect alarm After turning on the Bluetooth disconnection alarm, when the Bluetooth is disconnected, the blue light of the ring flashes + vibrating prompt, which will continue this state; there are two ways to turn on or turn off the function:
Use the communication command, Scan the barcode for the specified setting. After the Bluetooth connection is successful, it prompts to terminate. Automatic Scan setting Scanning [interval scan time-increase] bar code, you can increase the light-off time after successful scanning [each time increase by 0.5 seconds, the longest does not exceed 2.5 seconds]
Scanning [interval scan time-decrease] bar code, can reduce the light-off time after scanning is successful [decrease by 0.5 seconds each time, the shortest is not less than 0.5 seconds]
Note: This time is available when the scan mode is automatic gap scan mode. interval scan time-increase interval scan time-decrease 34 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure statement. The device can be used in portable exposure condition without restriction W28 Series Product 2D Ring Scanner Product Specification Manufacturer's Name: Shanghai Hyco Genyong Technology Co., Ltd. Sample Description: Room 105, 1/F, Building B, No.999 of Huaxu Road, Qingpu District, Shanghai, China. Trade Mark: HYCO Model number: W28 Operating Temperature: 10 C to 40 C This device was tested for typical bodyworn operations. To comply with RF exposure requirements, a minimum separation distance of 5cm must be maintained between the users body and the handset, including the antenna. Thirdparty beltclips, holsters, and similar accessories used by this device should not contain any metallic components. Bodyworn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out. 1. CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS 2. The device complies with RF specifications when the device used at 5cm from your body This product can be used across EU member states CE NB RF specification:
Function Operation Frequency Outputpower BT 2402-2480MHz Max RF
(dBm) 5.81 Limit
(dBm) 20 This product can be used across EU member states websitewww.hycoiot.com Phone number4006-305-758 Hotline+86 15201965821 EmailSales@hycoiot.com District,Shanghai,PRC 35 AddressRoom 302, Building A, No.999 Huaxu road, Qingpu