C20 Smart Charger User Manual C20 Smart Charger User Manual Shanghai HYCO Genyong Technology Co., Ltd. Disclaimer Please read all the contents of the manual carefully before using the products described in this manual to ensure the safe and effective use of the product. Please keep this manual in a safe place for future use. Do not disassemble the terminal by yourself or tear up the seal on the terminal. Otherwise, Shanghai HYCO Genyong Technology Co., Ltd. will not be responsible for the warranty or replacement of the terminal. The pictures in this manual are for reference only. If there are individual pictures that do not match the actual products, please refer to the actual products. For the improvement and update of this product, Shanghai HYCO Genyong Technology Co., Ltd. reserves the right to modify the documentation at any time without prior notice. All information contained in this manual is protected by copyright. Shanghai HYCO Genyong Technology Co., Ltd. reserves all rights. Without any written permission, no unit or individual may extract any form or part of this document in any form or copy or bundle and use with other products. The products described in this manual may include Shanghai HYCO Genyong Technology Co., Ltd. or third party copyrighted software. Unless authorized by the relevant right holder, no unit or individual may copy or distribute the above software in any form, e.g. modification, excerpt, decompilation, disassembly, decryption, reverse engineering, leasing, transfer, sublicense, and other infringement of software copyright. Shanghai HYCO Genyong Technology Co., Ltd. has the final right to interpret this statement. Websitehttp://www.hycoglobal.com C20 Smart Charger User Manual Appearance C20 charger Ring scanner charging groove Indicator light Micro USB charging port Barcode for disconnect bluetooth C20 Smart Charger User Manual User manual Ring scanner Indicator light C20 charger Barcode for disconnect bluetooth USB cable Ring scanner Charging Contact Push the ring strap to the bottom of the slot Ring strap C20 Smart Charger User Manual How to charge:
1. 2. 3. Connect the adapter with C20 charger, and connect the adapter to power. When it is not in charging, the indicator light on the charger keeps green. Put the ring scanner into the bottom of each charging slot with the scan window upward. Please note the power contacts between the ring and cradle must be touched, and the ring strap must be pushed to the end of slot. 4. When the indicator light turns red, it indicates the ring scanner is in charging. 5. When the indicator light turns green, it means charging finished. If you need to disconnect the ring scanner with the device connected before, please scan the barcode on the middle of the C20 charger. Components Item Quantity Usage Support 10 sets of ring scanners in one charging cycle Connection between power and charger To connect the power Factory certificate User manual Charger USB Cable 5V2A Adapter Certificate User manual One One One One One C20 Smart Charger User Manual Specifications L*W*HMM 266.5*151.4*36.7 WeightKG 1.02 Working temperature
-10C~50C Charging grooves 10 Pcs quantity Bluetooth BT4.2, BLE Charging port Micro USB Machine electrical Rated input voltage5V parameters Rated input current2A Charging indicator In charging: static red light Charging finished: static green Notice 1. Check the ground connection safety before using. 2. Do not spray any liquid onto the charger. 3. If the charger will not be used, please pull out the power adapter. C20 Smart Charger User Manual FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. C20 Smart Charger User Manual Manufacturer's Name: Shanghai Hyco Genyong Technology Co., Ltd. Sample Description: Smart Charger Trade Mark: HYCO Model number: C20 Operating Temperature: 10 C to 35 C This product is a fixed location. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the users body and the device, including the antenna. Use only the supplied or an approved antenna. This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out. 1. CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS 2. The device complies with RF specifications when the device used at 20cm from your body CE NB RF specification:
Function Operation Frequency Outputpower Max RF BLE This product can be used across EU member states 2402-2480MHz
(dBm) 6.11 Limit
(dBm) 20