Step 2:
Step 3:
Then click next Click Health Manage-
ment from the bottom menu Click the scan icon to scan the QR code on the back of the pillbox one more Time. mBox smart pillbox Quick Guide Step 1 Scan the QR code on the back of the pillbox with WeChatTM, then follow the official account 1 2 Go back to the WeChat Step4:
official account, click others from the bottom menu; select WIFI Setup Input WIFI password Attention Open the pillbox, wait for The pillbox connects to the same WIFI your phone is using and only the middle LED light to turn 2.4GHz WIFI is supported. on, then close the pillbox If your phone is connected to 5GHz Repeat opening and clos-
ing the pillbox two more times till the LED start flashing 3 WIFI, the pillbox wont connect. You should switch your phones WIFI network to 2.4GHz WIFI first, then repeat Step3. 4 The setup is complete. Step5 Scan the bar-
code on the package for auto-setup Step6 Verify your cellphone number 5 6 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the users authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.