XINWU-U601 Instructions Quick Use Guide:
Putting A and B headsets into charging box to charge, and pressing multi-functional key till the blue LED have flashed for three times 2. configurat TMS: Pressing both A and B headsets multi-functional the red and blue LEDs flash alternately, then double-cl multi-functional quickly, the headsets TWS successfully p. itself when the red LED has flashed for six times, during it, you may see the red and blue LEDs flash alternately, ignore it, after about 5-10s, both headsets flash blue light, it shows the configuration is success, back them into the base to charge 3. Clear out the Bluetooth list on the phone 4. Use the headset according to the quick use guide True Wireless Stereo Touch contro &
left ear Subsequent use BQB:
Pressing A and B headsets 2.5 seconds till the blue Led flash(dont start Bluetooths tect up at the same time) product standar Bluetooth Controle Play suspend Touch the pattern support A2DP dec received distance:
On the line Only have the hosts voice working frequency Transmit Power: |
Answer When call is coming, click the multi-functional key Support for simple Audio decoding m Adjust Method: G SNR(Signal to Noi When callis coming, keep pressing the degree of distortio multi-functional key till the call is rejiected input voltage: DC Hang up When calling, click the multi-functional key Battews capacity:
phone's battery display iphone and MI can display the headsetsbattery Four power indicator light ging box TOUCH CONTROL right ear hnology meets the national standards rd:
er: CSR64110 V4.2 version oding
: Within 10 meters 2.402GHz~2.480GHz CLASS2, MAX4dbm
> pairing ode: SBC 3FSK, TT/4 DQPSK,8DPSK ise Ratio): >75dB mn: <1%
>5+0.25V 3.7V/50mAh Charging Before using,please charge the pedestal ft PIN charger into AC socket, and insert the ch the USB port of the base, then the charge lan rise which displays the power of the base (one 25% charge) Charging time of the base Time of charging takes about an hour The base supports charge while outing (You base and the base can charge the earphone a The base charges the earphone Before you use the headset for the first tim the battery of the earphone fully. Put the ear bases charging port;
Charging time Time of charging the battery about an hour Charging indication The red LED is bright and the red LED will go out when the headset the blue LED will be bright operating voltage: 3.7V (3.3-4.2V) charging time: <2H Microphones sensitivity: -42+3DB low battery alarm: 3.3V Speaker Specification: 320+15%
time for play music continuously: 22.5H Standby connection time: 2100H operating current: $25mA (louder voice ma static current: S5uA Matching name:U601 Matching code: 0000 (Lower than version Z This device complies with part 15 of the FCC Rules. Operation is subject This device may not cause harmful interference, and (2) this device must including interference that may cause undesired operation.Changes or mx the party responsible for compliance could void the user's authority to op ully. Insert the AC largers outlet into mp in the base will
= lamp stands for
| the battery normally 1 can charge the at the same time) ne, please charge phone into the y normally takes when charging, t is full and then akes greater current) 2.1) to the following two conditions:(1) accept any interference received, dications not expressly approved by verate the equipment. Operation Functions:
Define the host: Pressing any one bluetooth headset(such as left channel headset)(dont loosen when the blue lamp is bright and press the headset for around 5s) till red and blue lights flash alternately, then turn on the bluetooth of your phone and search equipment Air-TWS, choose and connect, the headset enters into standby mode after successful pairing, and the blue LED will flashes every 8 seconds:
Define the attached machine : Go on pressing the other Bluetooth headset(such as right channel headset)(loosen as soon as the light flash)till starting up, the right ear will return to the left channel automatically, the right ear enters into standby mode after successful connecting, and the blue LED will flashes every 8s;
When the attached machine don t connect with the host(the red LED flash slowly after the attached machine starts up), it may be caused by the following reasons :
&@xINwWu https://www.instagram.com/xinwu_headphones/
https://www-facebook.com/2018xinwu/
sf https://twitter.com/Newp: