FCC ID: 2A3SO-DCA013 Smart Pet Feeder

Put 4 AA batteries into the battery compartment, As a backup power source

*Please make sure there is no grain in the barrel before installing the battery

*The barrel can be installed upside down Attention This is an emergency power supply for power failure. If there is no such requirement, you can skip this step

Press the USB cable flatly into the bottom power cord slot

Place the main body on a level surface install the food bowl below the grain outlet

Take out the body of the smart feeder and insert the power cord into the power adapter socket at the bottom of the body to ensure that it is firmly inserted

Open the cover and add pet food Place desiccant evenly into the box behind the top

To download the app, press Prompt to add device, set mobile Feeding plan

Press the manual feed button three times,One portion of grain can be produced (about 10g-15g)

(1) IOS users can search for "Smart Life" in the APP Store to download.

(2) Android users can search for "Google Play" APP in the browser, search for "Dpet smart" in "Google Play"

and download and register.

*The equipment needs to be connected to the power supply first, and then the distribution network operation. APP download QR code

Power on the device: open the battery cover at the bottom of the machine, insert one end of the free USB cable into the USB hole at the bottom of the machine, and the other end into its own adapter or the socket with USB interface, and then connect the device to the power supply.

At present, the device supports two network configuration modes: Bluetooth network configuration and AP network configuration. You can choose one of the two. It is recommended that users use Bluetooth configuration network first. If Bluetooth configuration fails, you can switch to AP network configuration. Note that the network configuration The process needs to be completed within 3 minutes, and the timeout needs to be triggered to enter the distribution network again. 1

1. Put the device on the power and let it stand without long pressing the button to ensure that the indicatorlight is flashing slowly 2. Open the APP and mobile phone Bluetooth, click the "+" sign in the upper right corner of the APP homepage to enter the device list, and enter the device that pops up at the bottom of the APP to add;

3. Confirm that the device indicator is flashing slowly, and enter the wifi password as prompted by the APP to ensure that the phone is connected to a 2.4G wifi network;

4.After the network configuration is successful, the iris will be steady white, indicating that the device is connected to the network, and you can use the APP to remotely control the device.

2 1. Put the device on the power and let it stand, press and hold the button for 5 seconds, release it after a beep, and observe to confirm that the indicator light is blinking in a breathing mode 2. Open the APP, turn off the Bluetooth of the mobile phone, click the "+" sign in the upper right corner of the APP homepage to enter the device list, select the smart feeder and click to enter, then click the network configuration mode in the upper right corner to switch to "hotspot network configuration (compatible mode)";

3. Confirm that the device indicator light flashes in a breathing mode, and enter the wifi password as prompted by the APP to ensure that the phone is connected to a 2.4G wifi network. After the input is complete, enter the hotspot network configuration instruction page;

4. Select the network starting with SmartLife- in the network configuration list to connect. After the connection is successful, return to the APP to enter the network configuration progress page;

5. After the network configuration is successful, the iris will be steady white, indicating that the device is connected to the network, and you can use the APP to remotely control the device.

1

1.Please confirm whether the router password you entered is correct, and pay attention to the WiFi account or whether there are spaces and case problems before and after the password;

2. Please confirm that you are connected to a 2.4G band network. At present, the device does not support 5g band network, that is, the default network name is WiFi network with the word - 5g 3. Make sure that the encryption method in the wireless settings of the router is WPA2-PSK, the authentication type is AES, or both are set to automatic. The wireless mode cannot be 11n only;

4. If the router enables wireless MAC address filtering, you can try to remove the device from the router's MAC filtering list to ensure that the router does not prohibit the device from connecting to the Internet, or turn off MAC address filtering;

5.Make sure that the router has enabled the DHCP service. If it is not enabled, the IP address will be occupied.Among them, 3, 4, and 5 belong to the professional field and need to contact the router manufacturer for adjustment.

2 Please troubleshoot the router first, and then scan the WeChat QR code at the end of the manual to feedback the problem. Please provide the router brand and model when giving feedback.

White flashing:

Bluetooth standby network Orange:Food shortage The grain is lower than the height detected by the optical eye in the cabin White breath:

Hot spot to be distributed White light is on:

Already equipped Red:Block food Need to cut off the power and re-energize, then take, Out of the turntable to clean up the grain Flashing red Enter the production test mode, you need to cut off the power and re-power it to restore Off: The device has no power or battery mode, you need to remove the battery, only connect the USB cable, and plug the USB cable again

Product Name :Niaoyu Huaxiang Smart Feeder Product number :DCA013 Overall size(mm) :315*180*330 Suggested pet types :cats, small dogs Machine capacity :2.5L Pet food :do not support aliens, holes and pet food with a diameter greater than 10mm Power supply :5V 1A Communication method :Wi-Fi connection (2.4GHz) Communication distance :30m Warranty period :1 year

1. Please use it in an indoor environment, do not use it in direct sunlight such as a balcony. 2. Do not drop items other than pet dry food into the storage bucket, otherwise there is a risk of causing equipment abnormalities or causing pets to eat by mistake. 3. To prevent pets from falling, it is recommended to place the feeder in a corner or against a wall. 4. Please cover or store the power cord to prevent pets from biting the cord and causing dangerous situations such as electric shock. 5. Do not disassemble or modify the device by yourself. 6. This product does not support pet food with special shapes, holes and a diameter greater than 10mm. It is only suitable for dry pet food. Do not add wet food. 7. The shape and density of pet food grains will cause a certain deviation in the capacity of the grain bucket. 8. The number of grams of grain per serving varies due to different grain densities. 9.In the case of battery power supply, the standby time can be up to 8 days. Please install the battery in advance before traveling. 10.Do not directly push the turntable into the equipment, it will cause damage to the components, please watch the video. 11.To disassemble the turntable, put it into the hole by hand and pull it up. After the turntable is taken out, the inside can be wiped with a wet wipe, please do not wash with water Smart feeder turntable Installation introduction Turntable disassembly and machine Internal cleaning

1. The wifi password is incorrectly entered (the small eyes that can open the input page) 2. Connected to a 5G network (generally a router will release 2 frequency bands, 2.4G and 5G, check whether the wifi name has the word 5G, if it is connected to 2.4G, you need to contact the router manufacturer to turn off the 5G signal) 3. The connection line is not plugged in well or the connection line is damaged, you can check whether the light is displayed normally 4. Whether the status of the device indicator is correct (flashing quickly or breathing, if it is breathing, check whether the APP is switched to the hotspot distribution mode) 5. User operation problems, check whether the operation is in accordance with the network distribution process and ensure that the machine is close to the router Check whether the network status of the device to be configured is consistent with the APP's network configuration mode. The indicator corresponding to the Bluetooth configuration network flashes slowly, and the indicator corresponding to the AP network configuration flashes in a breathing manner. The Bluetooth configuration network needs to turn on Bluetooth, and the AP network needs to turn off Bluetooth

1.Check whether the turntable is installed properly 2.Check whether the food is stuck (picture or video, judge whether the indicator light is red) 3.APP can't control the output of grain, check whether the indicator light is always on, if it is flashing, it means the device has no network, and it is correct that no grain is output. 4. Pour out the grain, take out the turntable, trigger the grain to see if the motor does not turn, if it does not turn, the motor is abnormal, and the machine needs to be replaced 5. No food will be delivered under the battery condition. Please note that the device cannot interact with the APP under the battery condition, because there is no response after the APP control

1. Check the button: press the button 3 times and ask the user if he feels the button bounce, it may be that the button is malfunctioning 2. Check whether there is power: check whether the indicator light is on, whether it is flashing, steady, or other colors, it means that the device has power 3. Check whether the operation is correct: press the button 3 times within 5 seconds, don't be too eager, just use the normal speed button

1. Check whether the device has a network: check whether the indicator light is normal and always on, if it is, there is no problem when powering on, and you can perform step 2 troubleshooting 2. Check whether the motor is abnormal: put your ears close to the machine to see if you can hear the rotating sound, or pour out the grain, take out the turntable, operate the grain, and see if the motor rotates 3. Check if the turntable is installed

1. Check whether the turntable is installed 2. If several copies are issued, it may be an old machine. The feeding plan set before will also be executed. First delete all the feeding plans and reset them. 3. Grain delivery is non-stop. If the cause of the turntable is eliminated, it may be a machine problem. A 30-second video must be provided and returned to the factory after confirmation

No need to re-operate the distribution network, the module will automatically work

When successfully connected, find and click the icon in the on the device control page, click Sharing Device and input the phone number to send device sharing invitation

This is the infrared light emitted by the optical eye of the device is detected by the camera.Normal human eyes cant see

Will do if the feeding plan is previously set

Yes, it should be noted that you need to long press the 10 second button to unbind or operate to unbind at the app end (click the icon in the upper right corner of the control page to enter the secondary page, pull to the bottom and click unbind), and then carry out the distribution network operation

Yes, as long as there is a 2.4g network, there are currently 4 APP versions: China, Korea, Japan, and Taiwan. The adapter is also compatible with foreign voltages, and foreign voltages between 100-240V are applicable

7~8 days, can not interact with APP under battery condition

It is recommended to take out the turntable and wipe it with a wet wipe

Check whether theres food in the machine that covers the optical eye, if it does, the machine would define current mode as food shortage condition. Thats when the light is orange. When the food inside turns full and leaves the optical eye away, the light will switch to white as the machine condition is defined as common-operated.

There may be a problem with the button rebound of the device, and it must be returned to the factory after confirmation

Delete all plans first and reset

User operation problems, tell users not to rush when operating,Press 3 times within 5 seconds

It varies according to the density of the grain, about 2.5 kg. About one cat for half a month

Need to check whether it is during the energy saving period of the machine, from 11 pm to 7am

Yes. 5 times press on the main control button to shut the light.

Wechatmeifu0514 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. etween the radiator & your body. This equipment should be installed and operated with minimum distance 20cm

Name: Smart Pet Feeder FCC ID:2A380-DCAOI3 Model: DCA013, Wireless Type: Wi-Fi(2.4H2) Dimensions(LxWsH): 315x180x330(mm) Rated Current: DCSVIA Made In China Fe CP65 ES

shanghai Niaoyu Huaxiang Pet Co., Ltd Room 901, Block H, Xuhui Vanke Center Xuhui District Shanghai China Date: 2022/1/26 FCC ID: 2A3SO-DCA013 Model Number: DCA013 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, shanghai Niaoyu Huaxiang Pet Co., Ltd , declare that this EUT

(FCC ID: 2A3SO-DCA013) doesnt have Ad Hoc mode function on non-US/Canada frequencies. In addition. The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, Name/Title Company:

Address:

Phone:

Fax:

E-Mail:

Yonglai Wang/CEO shanghai Niaoyu Huaxiang Pet Co., Ltd Room 901, Block H, Xuhui Vanke Center Xuhui District Shanghai China 021-58338601 021-58338601 service@petsmarvel.com

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2022/1/26>

Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID 2A3SO-DCA013 Model name DCA013 For the product stated above, we request that the following information be held confidential;

Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title Yonglai Wang/CEO Company:

Address:

shanghai Niaoyu Huaxiang Pet Co., Ltd Room 901, Block H, Xuhui Vanke Center Xuhui District Shanghai China 021-58338601 021-58338601 service@petsmarvel.com Phone:

Fax:

E-Mail:

shanghai Niaoyu Huaxiang Pet Co., Ltd Room 901, Block H, Xuhui Vanke Center Xuhui District Shanghai China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

2022/1/26 We, shanghai Niaoyu Huaxiang Pet Co., Ltd the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2A3SO-DCA013 including the signing of all documents related to these matters. effect as acts of our own. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Yonglai Wang/CEO shanghai Niaoyu Huaxiang Pet Co., Ltd Room 901, Block H, Xuhui Vanke Center Xuhui District Shanghai China 021-58338601 021-58338601 service@petsmarvel.com Sincerely, Name/Title Company:

Address:

Phone:

Fax:

E-Mail: