K1 Kiosk User Manual Book Before using this product, please read carefully this instruction manual and keep it properly. Quick Install Guide Minimalist Setting Enable the smart commercial device, which only needs several steps 1 2 3 After turning on the complete machine power supply, the screen will be lit and you will enter the rst boot interface, and just simply operate according to the instructions. There are above two types of Internet surng modes available for the local machine to choose. Wi-Fi setting Click Setting button, then enable WLAN, enter WLAN search interface. Wait for its search and list the available WLAN hot spots;
Click WLAN to be connected and it is required to enter access password for connection if an encrypted network is selected. LAN setting After plugging in properly the network cable, click Setting button, click Wired Network, to choose Enable;
It is required to enter access password for connection if an encrypted network is connected. As for IP address, there are two options: to automatically obtain IP & to manually enter IP address. How to download/use App This Self-Checkout Kiosk is applicable for the cashier environment of commercial customers in various industries, such as Chinese & Western catering industry, high-end department stores, supermarkets, convenience stores, information sites, interactive multi-media, etc. The relevant App can enable the App market under the Internet mode, browse & download App to simply complete the installation. 2 3 4 1 1 Open the panel with key Plug the network cable into the network interface Plug the power line into the power supply module Turn on the complete machine power switch 2 3 4 noticeIf involved voltage conversion , please contact professional sta or Sunmi Please read the internal machine help App for more usage help Brief Introduction of Self-Checkout Kiosk Face camera Integrated touch display screen Protection cover on the mainboard Paper exit of the printer Bar code scanning port System on-o key Face camera Camera used to shoot human face. Bar code scanning port Used to scan the bar codes of the goods or mobile phones. Integrated touch display screen Touchable screen applied for customer usage. Paper exit of the printer Used to print receipts in the state of power-on. System on-o key In standby state, short press to boot, short press again to be in standby mode;
In service status, long press for 2 to 3 seconds, and you can choose to shut down or restart;
In the state of power-on, long press for 11 seconds, and power o to shut down the machine. Protection cover on the mainboard Inside the machine. And the mainboard external interfaces will be exposed after opening it, for example: USB port, TF card port, etc. Wired network interface Inside the machine. A wired network socket. Key for panel power supply interface On the power supply module. A complete machine power supply socket. Key for panel key hole Open the panel, and it is convenient to carry out the paper change operation & internal maintenance. Key for panel power switch On the power supply module. This switch controls the on-o of the complete machine power supply. Wired network interface Key for panel power supply interface Key for panel power switch Key for panel key hole Paper Loading Steps of the Printer of Self-Checkout Kiosk Three Types of Installation Methods Available for K1 Self-Checkout Kiosk 2 4 1 3 2 3 1 2 Open the host panel Open the host panel with key. Open the printer bin gate Toggle downward the printer driving lever and open the printer bin gate. 3 4 Install the printing paper Place inward 80 mm thermal sensitive paper and pull out a section outside the printer port. Close the bin gate and the panel Press both sides of the printer bin gate and close this gate. The printer will automatically cut paper in power on state. In power o state, it is necessary to manually tear o excessive paper;
Close the host panel. 1 1 2 3 Vertical type installation Wall mounting type installation Desktop type installation Installation Steps of wall mounting type complete machine 136 1096 196 1 Install the wall-mounted rack Drill holes according to the height described in the reference drawing. Firmly x the wall-mounted rack onto the wall surface. 2 Install the rear mounted pieces of the host Assemble the rear mounted pieces of the host onto the back side of the host. 3 Mount the host well Mount the host onto the wall-mounted rack. 4 Plug in of the cables Pass the power line & network cable through the cabinet opening, and plug in the plug at the host end. Installation Steps of Vertical Type Complete Machine Upright post Base plate Table bracket Left side stainless steel table Cross beam Right table 1 Install the upright post Install the upright post onto the base plate. 2 Install the left side table bracket Assemble the table support member onto the upright post. 3 Install the left side table Assemble the left side stainless steel table onto the table bracket. 4 Assemble the right side table & cross beam 5 Assemble the right side table Assemble two cross beams onto the right side table. Assemble the right side table onto the table bracket. Installation Steps of Desktop Type Complete Machine xed 1 Assemble the desktop bracket Assemble the desktop bracket into an assembly. 2 Install the bracket Hold the host screen downward, install the desktop bracket onto the host backboard. 6 Install the xed mounting elements 7 Mount the host onto the upright post Pass the power line & network cable through the cabinet opening, and plug in the plug at the host end. The camera height after installation is suggested to be 1620 mm above the ground. 3 Plug in the cable Pass the power line & network cable through the cabinet opening, and plug in the plug at the host end. Basic Parameters of Self-Checkout Kiosk Package Packing List of Self-Checkout Kiosk Host Operating system Android 7.1 Processor Storage Display screen Touch screen WIFI Bluetooth Face camera Printer Rockchip RK3288 Memory:2GB; store:16GB + TF card extension 21.5 TFT-LCD display screen, resolution: 1920*1080 Ten point touch control capacitive screen Single frequency 2.4G, support 802.11b/g/n Support Bluetooth 4.0 BLE and iBeacon Light camera with 3D structure Printing head with 80mm width, paper roll with 80mm diameter, with automatic cutter Bar code scanning Vertical type platform scanner for 2D image Horn Dual track, 3W each Power supply input 100-220V~3.5A 50/60Hz 200-240V~2.0A 50/60Hz Operational environment 0~4025%~90%
Storage environment
-20~5593% (40, non-condensing) Packing & Shipping Parameters of Complete Machines External Dimension External dimension Host: 36cm width 11cm depth 82cm height;
vertical type complete machine: 36cm width 11cm depth 82cm height host 1 set of wall mounted type racks 1(required in wall mounting) accessories box 1 piece of receipt paper 80 mm 60 mm 1 host power line 1(national standard) host network cable 1 antenna 1 hooks 2 host keys 2 mounting screws 9(Cross recessed pan head combination screw M5*14) power supply adapter 1 User Guide 1(including packing content, product certicate of compliance) Common Troubleshooting Symptom Solution How to do when crashed The printer doesnt work Complete machine weight Host only: 17.6 kg; vertical type complete machine: 64.8 kg The printing content is blank Packing dimension/weight
(including package) Host package: 47cm width 91cm length 21cm thickness, weight: 18.5 kg Vertical type package 1/3: 55cm width 57cm length 23.5 cm thickness, weight: 10 kg Vertical type package 2/3: 30cm width 138cm length 30 cm thickness, weight: 18 kg Vertical type package 3/3: 61.5cm width 64.5cm length 4 cm thickness, weight: 24 kg The vertical type base is divided into 3 pieces in packing for ease of transportation. Vague printing content Long press the power key for 11 seconds, enter power o shut down, short press to restart. Conrm that the paper storage cover is correctly closed;
Conrm whether there is paper sticking fault. Please check whether the paper roll has been reversed. Please check whether wrong thermal sensitive printing paper roll has been used. Please check whether the thermal head piece has been contaminated. If it has been contaminated, please use cotton swab dipped with absolute alcohol to carry out wiping. Please change the thermal paper with quality guaranteed, to avoid unclear printing caused by low paper quality. Name & Content Identication Table of This Products Toxic & Harmful Substance Toxic and harmful substances and elements Pb
(Hg)
(Cd)
(Cr(VII)
(PBB)
(PBDE) Name of parts Circuit board Shell
:It indicates that the content of toxic and harmful substances in all homogeneous materials of this part is below the limit specied in SJ/T11363-2006.
:It indicates that the content of toxic and harmful substances is higher than the limit specied in SJ/T11363-2006 in at least one homogeneous material of this part; however, the the reason why the toxic substance of that part exceeds the limit is that there is no applicable material to replace it currently. For products that have reached or passed the service years for environmental protection, they should be recycled according to Measures for Control and Management of Electronic Information Products and should not be thrown away at will. Manufacture Room 505 No.388 Song Hu Road Shanghai, China Points for Attention Safety warning Please plug the AC plug into the AC socket corresponding to the identication input on the power adapter of the accessory;
It is strictly forbidden to use it at a site with the existence of any potential explosive gas;
Non-professionals are not allowed to open the internal module at will, to avoid danger. This is a A grade product. In the living environment, this product may cause radio interference. In this case, the user maybe required to apply feasible measures against the interference. Points for attention about the power supply Please unplug the plug from the power supply AC socket to completely disconnect the power supply connection of the device;
The power supply socket should be installed near the device, and be easy to contact. Important Safety Instructions Avoid it to be installed or used during the thunder &
lightning period, otherwise there will be risk of being electrically shocked by it;
When you have discovered unusual odor, overheat or smog, please cut o the power supply at once!
The paper knife is relatively sharp, please dont touch it!
Suggestions Do not use it near the water or in the humid environment, to prevent the liquid from dropping into the terminal;
Do not use it in extreme cold or hot environment. For example: near the ignition source or lighted cigarette;
Do not drop, throw or bend it;
Try best to use it in clean and dust-free environ-
ment, to prevent small items from dropping into the terminal;
Do not use it nearby the medical devices when not allowed. Statement Our company will not be responsible for the results of the following actions Damage caused by usage & maintenance not under the conditions of this guidance note;
Our company will not be responsible for any damage or problem caused by any option or consumable (not the initial product or recognized product provided by our company). You have no right to make product modications or changes without the consent of our company;
Disclaimer Due to the product update, certain details of this document may be inconsistent with the product. Please refer to the material item. Our company owns the interpretative right of this document. We reserve the right to modify this user guide without giving advance notice. FCC Regulations:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct theinterference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.This equipment must be installed and operated in accordance with provid-
ed instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. BT/BLE Wi-Fi 802.11b Wi-Fi 802.11g Wi-Fi 802.11n Operation Frequency 2402MHz-2480MHz 2412MHz-2462MHz 2412MHz-2462MHz 2412MHz-2462MHz Transmitted 1.5 1.5dBm 18.5 1.5 dBm 18.5 1.5 dBm 17.5 1.5 dBm