Build in just 3 minutes Programme in just 5 minutes Suitable for beginners Build in just 3 minutes Programme in just 5 minutes Suitable for beginners Controller Infrared Sensor 5 Gray Integration Sensor Touch Sensor x2 The piccture only for you reference The picture only for you reference Closed-loop Motor x3 Expression screen Build in just 3 minutes With over 600 structural components and integrat-
ed chassis, hundreds of unique and interesting robot projects can be built in just a short time. Programme in just 5 minutes The software offers four programming modes:
modular, Scratch, Python, and C-language, as well as three basic control modes: language, grav-
ity and virtual amepad. Suitable for beginners Edu-Cloud offers free tutorials so that users with-
out any foundation can access creativity training from the comfort of their home. Product Name: Whalesbot Block Robot Product Number: AI Module 1 Manufacturer: Shanghai Whalesbot Technology Co., Ltd. Address: 5th floor, Block A, No.2337 Gu Dai Road, Shanghai Tel: +86-021-33585660
6 97 2 1 34 3 3 0 03 9
Structural Parts
Electronic Devices Introduction
Controller Interface and status
Controller battery installation
1.5Double Bolt x35 2 Double Bolt x140 3 Double Bolt x35 50 Single Beam x18 2Double Step Bolt x4 1Double Step Bolt x8 Expression screen Touch sensor I/O 5 gray Integrated sensor: 5 I/O Inport:1/2/3/4 U-Shaped Beam x3 Motor Transfer Bracket x4 1Square Cotter x4 20 Beam x15 30 Beam x20 50 Beam x21 General Chassis x1 Controller 70 Beam White x12 Orange x8 110 Beam White x6 Orange x8 1264X6 Beam White x6 Blue x4 903X5 Beam White x10 Blue x6 5X7Square Beam x4 Infrared sensor USB download port Servo motor port Transmission Parts Closed-loop Motor 5 gray Integrated sensor ON/OFF Closed-loop Motor port: A/B/C/D
OFF=Shut down
White=Startup,Ready
White flashing=Running program
Yellow flashing=Download,Updating
Red flashing=Charging The Controller requires the use of 6 AA/LR6 batteries. AA alkaline batteries is recommended. To insert the batteries into the controller, press the plastic on the side to remove the battery cover. After installing 6 AA batteries, replace the battery cover.
Battery use precautions:
AA alkaline, carbon zinc and other types of batteries can be used.
Non-rechargeable batteries cannot be charged;
The battery should be placed with the correct polarity (+, -).
The power terminals must not be short-circuited;
The used battery should be taken out of the Controller.
Remove the batteries when not in use for a long time. Note: It is recommended not to use rechargeable batteries!
Note: if your battery is low, press the
"start" button after block status lights may still in red, and shine. Energy-saving practices
Please remove the battery when not in use.
Close the controller when not in use. Warning:
1.This product contains internal balls and small parts and is not suitable for use by children under 3 years old. 2.This product should be used under adult supervision. 3.Keep the product away from water. 20 Axle x6 30 Axle x4 40 Axle x14 50 Axle x6 60 Axle x4 80 Axle x6 12 Half High Bevel Gear x6 20 Half High Bevel Gear x4 Worm x2 20 Coupler x2 90Coupler x4 112.5Coupler x6 157.5Coupler x4 12Cone Gear x2 20Cone Gear x4 RackHole Beam x4 24Straight Tooth x2 A Universal Coupling x2 Caterpilla x60 Chain Wheel x6 6018 Tyre x2 Universal Wheel x1 0.5Pulley Axle Sleeve x30 Axle Sleeve x15 8Straight Tooth x2 16Straight Tooth x2 Decorating Parts 3X7Left Decorative Part Bluex3 3X5Left Decorative Part Bluex3 3X7Left Decorative Part Whitex2 3X5Left Decorative Part Whitex4 3X7Right Decorative Part Bluex3 33X5Right Decorative Part Bluex3 3X7Right Decorative Part Whitex2 3X5Right Decorative Part Whitex4 126Decorative Part Bluex6 126Decorative Part Whitex2 126Decorative Part Grayx1
Brick Status Light: OFF Brick Status Light: White Brick Status Light:Red flashing
Controller ON/OFF
Actuator
Sensor Power On: To turn on the controller, press and hold the power button. The controller status lights will become white and you will hear the audible greeting"Hello, I am a whalesbot!"
Running the program: To run the program in the boot state, press the power button on the controller. After running the program, the white lights on the controller will flash. Shut down: To turn off the controller, or run a program in the boot state, press and hold the start button. The controller will then enter the off state and the lights will turn off. Controller technical parameter Controller: 32-bit Cortex-M3 processor, clock frequency 72MHz, 512KB FlashROM, 64K RAM;
Storage: 32Mbit using mass storage chip, a variety of built-in audio, can be upgraded with software extensions more features;
Port: Provide 10 input and output interfaces, including 5 digital/ana-
log interfaces (AI, DO), 4 closed-loop motor control interfaces, with a single maximum current of 1.5A; 1 RS485 servo motor serial interface, with a maximum current of 6A; USB interface can support online commissioning mode to facilitate program commissioning;
Button: Set up a key to simplify user operation. Through this button, users are able to switch on and off the machine, run the program, deal with Bluetooth pairing and other functions. The built-in indicator light of the button displays various working states of the controller.
White Light: ON
Light off: Shut down 1. Closed-loop Motor Closed-loop Motor robot is the source of power used to perform various actions. Product picture 2. Emotional screen Emotional screen gives the robot a rich expression. Users are also free to play with custom emoticons. Product picture 3. Touch sensor Touch sensor may detect when a button is pressed when the sensor is released. Product picture 4. 5 gray Integrated sensor 5 gradation integrated sensor can detect the intensity of light entering the sensor surface of the device. Product picture Output shaft connection 6PIN Port Emotional screen 6PIN Port Installation Closed-loop Motor can be connected to any interface of controller A~D. Installation Emotional screen can be connected to any interface of controller 1~4. When installing the face up
(no connection hole facing up)
6PIN Port
6PIN Port Installation Touch sensor can be connected to any interface of controller 1~5. Installation 5 gray Integrated sensor can be connected to only interface of controller 5. Product picture Installation Infrared sensor can be connected to any interface of controller 1~5. 5. Infrared sensor Infrared sensors detect infrared light reflected from objects. It can also detect infrared light signals from remote infrared beacons.
6PIN Port 3X5Corner Decoration Bluex6 3X3Panel Decoration Bluex4 3X5Corner Decoration Whitex7 3X3Panel Decoration Orangex4 Facial Decoration x1
Programming software
Programming software
Sensor Actuator Controller Touch Sensor x2 Infrared Sensor x1 Closed-loop Motor x3 Emotional screen x2 Controller x1 Connecting line 5 Gray Integration Sensor x1 6PIN Connecting Line x8 Cable x1
1. WhalesBot APP WhalesBot APP is mainly aimed at children and teenagers. It provides assembly instructions, remote control, programming and other functions for AI Module 1 robot users. It is intended to cultivate children's creativity, hands-on skills and logical thinking ability. To optimize how you play with the AI Module 1, download the app now. Download WhalesBot App:
For ios, please search "WhalesBot" in App Store. For android, please search "WhalesBot" in Google Play. 2. WhalesBot Scratch WhalesBot Scratch software can implement mainstream programming, support bar chart programming and standard C programming. The flowchart module contains all functions, supporting subroutine functionality and other visual programming. Include motion, sensor
(detection), control, program, data, advanced and tour (7) function module; Based on new cross-platform technology, it's available for operating systems like Windows, Mac, and multi-threaded programming. Download links:
http://www.whalesbot.com NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help Changes or modifications not expressly approved by the party responsible for compli-
ance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the follow-
ing two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Bluetooth BLE5.0 Model No: NDB1793S02 FCC ID: 2ASTX- GC569198
5-2cm