Product Parameters Support Profile: AVRCP.TS. 1.6.0, A2DP.TS.1.3.1.HFP.TS.1.7.0, SPP.TS. 1.2.1 Working Distance Range: 10m Frequency Range: 2.402GHz-2.480GHz Battery Specifications: 3.7V, 400mAh, Built-in rechargeable lithium battery Charging Voltage: DC4.2 - 5.5V Charging Time: about 2 hours Battery life: about 15 hours Standby Time: about 50 hours Function Description Power on: Long press" ", the device starts, enters the Bluetooth mode automatically and the LED indicator flashes blue and green. Power off: Long press" ", the device turns off,and LED is off (prompt "power off ") Mode Pairing Operation of Wireless Mode:
a.First-time Pairing:
Headset boots into "Bluetooth Mode" automatically with the voice prompting "Bluetooth Mode" and LED indicator flashing blue and green. Without records of last connected smart device, headset automatically enters pairing mode within 3 seconds. Please turn on Bluetooth searching function of smart device, and connect the device named "B-06"
without password required. When paired successfully, headset prompts 'Connected ,
and its LED light turns blue. b.Re-pairing:
Turn off the connected smart device's Bluetooth function, headset prompts Disconnected
LED indicator turns blue and green and flashes each other. If headset can't search and pair with the last connected smart device within 3 seconds, the headset will automatically re-enter the pairing mode. Please turn on Bluetooth function of another smart device, and connect the device named "B-06" without password required. When paired successfully, headset prompts Connected , and its LED indicator turns blue.
Button Operation 1)Answer Calls: Short press when call's coming. 2)Hang up phone calls: Short press after answer. 3)Reject Calls: Short press for 2 seconds . 4)Redial the last outgoing number: Double-click
. LED Status Charge Status Power on Status Power off Status Pairing Status Standby Status Connected Status Bluetooth Mode LED turns red. When fully charged, the indicator light goes out LED indicator light rapidly alternating flashes Green and Blue LED indicator light turns on Blue LED Indicator light turns off LED indicator light turns on Blue LED indicator light turns on Blue In Bluetooth mode, LED indicator light keeps flashing Blue Short press: Play/Pause Music Answer/Hangup Calls Button Description Long press: ON/OFF Long press: next song Short press: add the volume Long press: previous song Short press: reduce volume Headset is automatically paired with the last connected device in 5 seconds after boot. to save power. c.Follow-up Pairing:
TF SD Card Playback Mode:
1)When inserting the SD Card to headset, headset automatically enters into the TF card mode, and the headset prompts "Music". 2)If SD card is inserted, press the "M" key to switch between the TF card mode and the Note 1)Battery indication on iphone and most Android Phone. 2)If the Bluetooth headset is not paired after entering pairing mode, turn off the headset 3)Do not do anything else while searching for Bluetooth, in case the program goes wrong. 4)Please choose an appropriate volume when using to prevent damage to your ears. 5)When the volume of the headset reaches the maximum, the headset will prompt a
"beep" warning sound. Mode switch key: Press the M key to switch between TF Card Mode and
Bluetooth mode.
Bluetooth Mode (TF Card mode works only after TF card is inserted)
3)TF card only supports WAV and Mp3 formats. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition, compliance with exposure requirements.