1. INCLUDED PARTS aSs>
aS a) Quadcopter X1 Transmitter X4 Screwdriver x1 USB Charging Blade A/B X2 wire X1 Battery X1__Instruction manual X1 3. Battery charging guide Connect the battery to the charging cable and plug the USB end into a USB port to charge the battery. Turn the power on. The red indicator will on when the battery is charging. The red indicator will be off once charging complete. Charging time is about 60-80 minutes, flight time is more than 5 minutes. 4. OPERATION INSTRUCTIONS 4.1 Booting System
@Pull left and right joysticks to inside comer then loose them. tThe blades will rotate in low speed. Then pull throttle joystick to fly up at the suitable height and loose joystick. Now drone will be locked and fly at this heigh. Also could be fly by press the button on controller leftside near power switch, controller with a beep, then drone fly up h and keep at the suitable height 6. OPERATING AND CONTROL 5.1 Speed Shift The key at top left corner is for speed shift by pressing the key.
@ Low Speed: press the speed shift key with a sound of beep.
@) Middle Speed: press the shift kev at the low speed with two beens. 5.3 Trimming Press down the key at top right corner with twice beeps into the fine-tuning mode. If the quadcopter skewings forwards, It shall be adjusted by pulling backwards the right rod on the transmitter, with the red indicator on the controller flashing in red and the back LED indicators flashing. If the quadcopter skewings backwards, It shall be adjusted by pushing forwards the right rod on the transmitter, with the red indicator on the controller flashing in red and the back LED indicators flashing. If the quadcopter skewings leftwards, It shall be adjusted by pulling rightwards the right rod on the transmitter, with the red indicator on the controller flashing in red and the back LED indicators flashing. If the quadcopter skewings rightwards, It shall be adjusted by pulling leftwards the right rod on the transmitter, with the red indicator on the controller flashing in red and the back LED indicators flashing.
* *After tuning, press down the key at the top right corner on the controller, with a beep, to quit tuning mode. Or keep the right rod still to quit. 6.3 Forward flip Press down the right lever , with a beep,push the lever forward, the quadcopter will flip one circle forward. 6.4 Backward flip Press down the right lever , with a beep,pull the lever backward, the quadcopter will flip one circle backward.
* *& Low Battery Alarm When all the four indicators flash at the same time, it is a signal of low battery. The flips function will be closed automatically. 2.1 Install Batteries of transmitter
@ Insert the battery into the battery compartment of the quadcopter, Power on the quadcopter
(the four LED indicators will flash). Put the quadcopter on a flat surface.
@ Switch power on, and the controller will beep twice and the indicators flash. The indicators on the quadcopter will flash as well.
@ High Speed: press the shift key at middle speed with three beeps. 5.2 Operation 7. HEADLESS MODE 7.1 Headless Mode Shift Low/middle/ For the beginners,the acceleration shall be very slow, otherwise it may cause damage out Press down the right lever, with a beep, into flip mode. Start-up/Setting: Upon pairing the controller with the | Orienting high seed phot press ions Stet @ Push the left rod completely forward and the controller will beep one time. The indicator on of control. Cee A eae bein acta oo sv quadcopter, Place the quadcopter staying on the ground Ong Press FEMININ Headless the controller and two indicators on the quadcopter will flash. Pull the left rod completely to RoniWerrs abie:the quad copier wit plorwares; or hovering in the air,ensure the head of the quadcopter ety jee the bottom and the controller beep once again. The indicator on the controller and the four Turn Right backwards, leftwards or rightwards accordingly. 9 a P in the same direction with the head of the controller. Press down the left rod into the headless mode, with b Indicator II lighti i id the LED In order to get better playing, pls keep a 1.2m height and ascend , this will be easy 3 esr a _ Of Seige ae Sn rete en e indicators diagonally. to keep the height after flips. indicators on the quadcopter will turn on. The two are now paired. 7 mode) f (\N Ascend /descend/ [i Forward/backward Left/right Turn Left / Turn right te) } Cis sideward fly Press down+
Press down into i } WS} / Direction 360 flip Headless mode Spy \ SE WW 1 e Intelligent Hovering one key take off ol -
t L | Turn Left *Quit: Press down the left rod again to quit the headless e Headless mode one key eeyancing \S a a x/ mode,with a beep, Indicator II turns off, and all four LED e One key flip y 9 ee Indicator 1 Indicator 2 Push the left lever (accelerator)up and Push the left lever (accelerator)leftward 6.1 Leftward fli indicators keep lighting PR: Power switch down, The quadcopter will ascends and and rightward,the quadcopter will turn left * ettward tip e One key spiral stunt descends accordingly. and turn right accordingly. 3 e One key balance recovery system 2.2 Install Batteries ees coun ie right h | | | |
m aloe : lever , with a beep, pus!
SMES ROT CCSMEES Bee CeCe LVS e Steady Hovering |
e New Control Mode with , a (Setting height &
Trimming Camera Version) 6-Axis Gyro System 2.4GHz 5Channel 360Flips tT Fowards the lever leftward, the quadcopter will flip one circle leftward.
@ After signal matching, put drone at the horizontal plane than pull the direction joystick clockwise one circle, the four LED lights on drone will light on and keep flashing . The gyroscope will restart and auto scan for location. WD 6.2 Rightward flip
** Before fly, please make sure finish calibration at the i : Left Right i horizontal plane then start fly slow and steady. dy Backwards cer vardty) Datvera ty Press down the right lever ,
** when drone crash during fly time and fly not correct with a beep,push the lever i eruiis batieiy compere Putin 4 pes AAA batteries with Put on the cover and get it direction, please also do calibration as this way. Push the right lever (swerving rudder) , Push the right lever (swerving rudder) rightward, the quadcopter uae with a screw driver. correct directions. fastened with screws, the quadcopter will go forward and leftward and rightward, the quadcopter will flip one circle rightward. backward accordingly. will go leftward and rightward accordingly. Please read the Instruction Manual carefully before using. Please keep it for your further reference. 9. INSTALL BLADES The head of quadcopter will be the heading direction. Keep the quadcopter in the air and press down the left rod to exit the headless mode. How to restart Di... AID abell kh Operation a
{t oS Turn the headless mode: keep the head pointing to the head of the controller, then press down the left rod. Now the quadcopter points the heading way. 7.3 One key return In headless mode, press down the Return button on the transmitter.The quadcopter will automatically return.If the quadcopter off course,when return. Please control the right lever fixed route.
* Press down the return button the quadcopter stop return.
%* Push the right lever*forward" let the quadcopter stop return. 7.4 Stunt fly operate During fly time, long press the top left corner button, controller with a beep, drone enter high speed spinning top rotation mode , then change to high i ie ee a bo ee eee ee ee ee ee ee oa to Location A/B on body. Or the quadcopter may have problems. Install blades:
Hold the head to aim at the motor axis and press down to lock. Be careful not to damage or deform the blades. 10. TROUBLE SHOOTING Warning : Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. ee Wook See the diagram. In Headless Mode, with diagonal indicators flashing, no matter which direction the head ( the blue LED light) faces, pull down the right rod and the quadcopter will fly back; on the contrary, push forth, it will fly away from the player. 7.2 Direction Calibration When the quadcopter flies deflected from crash, it may need recalibration by placing it on the plane ground,keeping the head pointing to the head of SPSS SELIG PVLeE control the throttle. ja REE SMSC Uys IEGow Long press the button at top left corner, controller with a beep then drone stop high speed rotarion, per long press drone do high speed rotation one time. 8. FLIGHT ENVIRONMENT:
Problem The quadcopter did not respond Reason 1. Singal matching failed. 2. Quadcopter or transmitter low voltage Solution
. Re-matching again. 2. Replace the transmitter batteries 3. Re-charge to quadcopter Failed flips Unable to take off 1. Improper operation 2. Quadcopter LED flashes 1. The blade is assembled wrong. 2. Blade impact deformation 3. Quadcopter LED flashes
. Checking the instruction manual again
. The battery of quadcopter is power off. Charging again. 1. Righting blades or replacing blades. 2: Righting blades or replacement blades . 3. The low-voltage protection, re-charge to quadcopter The quadcopter Shake 1. Blade impact deformation 2. gyroscope deviation 41. Righting blades or replacing blades. 2. Read the calibration part and do again. TIOWEVET, LETS lo TO BUGIGILES Uldat HILCHICreneCe Wil THO OOM Hid Palliculal installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Mme controver, ana press Gown the tuning Dutton. The controller will beep and the indicator will flash. Turn the right rod a round clockwise. Four of the red indicators on the quadcopter shall light on from flashing, and then keep flash. The controller indicator will light on from flashing. The direction calibrated. Do not operate the quadcopter in the bad conditions as mentioned for advoiding accident or unexpected demages. The quadcopter response delay or interrupt signal The quadcopter can not hover Transmitter low voltage 1. Quadcopter is not placed on a horizontal surface when singal matching. 2. Fine-tune of transmitter is not reset yet. Replacing the transmitter battery 1, Re-matching again. 2. The tramsmitter should be reset