BTE2-FD I USER'S MANUAL
@) lpecifications A Quick Look JL4.2 Specification:
Range: Up to 33 feet (10 meters) Bluetooth Bluetooth Battery Type: 55mAh, 3.7V, Polymer Charge Time: Approximately Play Time: Approximately 2 Hours 3 hours*
Lithium Ion Battery
*Applicable lower when volume is higher. at 50% of maximum volume. Results will be trademarks The Bluetooth are registered Bluetooth marks bySakar license. namesarethoseoftheirrespective word mark and logos owned by the SIG, Inc. and any use of such is under and trade International Other trademarks Power/Play/Pause/AnswerNoice LED Indicator Light Assistant
. Charging Port Microphone Last TrackNolume
ext TrackNolume
=l(( + @
_j
(red)= Charging 0 (off)= Charging Complete I
=QC+ @ -)JJ=
Important Safety Precautions Vivitar One Year Warranty BEFORE USING YOUR EARBUDS. This warranty covers the original consumer purchaser only and is not transferable. heat, flames or fire. carefully. dry environments, Do not manhandle your earbuds. as this can lead to static discharge to temperatures above 40 Q C. Keep out of direct What Is Not Covered by Warranty Damages or malfunctions from other than normal use, including accident. not resulting from defects in material or workmanship and damages or malfunctions but limited to, repair by unauthorized parties, tampering, modification or covers products or workmanship. This warranty material of one year. that fail to function properly UNDER NORMAL USAGE, due to defects in Your product will be repaired or replaced at no charge for parts or labor for a period yourself. Contact a qualified service center if To Obtain Warranty Call 1-800-592-9541 in the U.S. or visit our website Distributed International 195 Carter By:Sakar Service and Troubleshooting Information:
Drive,Edison,NJ 08817 at www.vivitar.com. Clean using a dry or slightly moist cloth. on any wet surfaces. to play with your earbuds without adult near water. to excessive 1. READ ALL INSTRUCTIONS 2. Do not use your earbuds 3. Do not place your earbuds 4. Do not allow children or the infirm supervision. 5. Do not expose your earbuds 6. Always press all buttons 7. Do not use in extremely during usage. 8. Do not expose your earbuds sunlight. 9. Do not attempt your earbuds 10. Do not drop, puncture 11. Your earbuds 12. Do not place near objects 13. Use only the supplied long periods 14. Use a soft cloth to clean your earbuds. detergents. of your earbuds 15. Please recycle of your municipality. Contact local recycling earbuds this product are in need of service. Make sure your earbuds information. are not intended that generate for further or dispose charging to repair cables. or expose your earbuds for commercial to excessive use. trauma. a strong magnetic Unplug this device when not in use for field. of time or during lightning storms. Never use any harsh chemicals or are dry before charging. properly based on the laws and rules and/or the manufacturer of your facilities along with the name and address must contact us for problem of an authorized product the and service procedures. Proof of service center, invoice, determination evidencing that the product is within the applicable in order to obtain the requested service. It is your responsibility to and send any defective products along with a dated copy of proof of purchase, a written service Warranty consumer purchaser in the form of a bill of sale or receipted period{s), To receive original purchase Warranty properly package of the problem, explanation not include any other items or accessories service center that are not covered MUST be presented and a valid return by warranty address to the authorized service at your expense. Any products received center by the authorized Do with the defective will be returned product. unrepaired. 2. Insert the USB charging USB plug into the charging earbuds. cable's port on your Micro the USB charging cable's standard 3. Insert USB plug into the USB port of a computer suitable USB charging adapter. 4. The LED indicator earbuds charging are charging is complete. light turns red while the then turns off once or Controlling Music FCC Statement Pairing Mode Red & Blue Flashing LED 1
=QC+ @
- )JJ=
Bluetooth ON 0 Paired Blue Slowly Flashing LED eooopo
=QC+ @
NEXT TRACK I I =QC+ @ - ))]=
LAST TRACK lHI I c ))]=
=QC+ @
1. Press and hold the power button to power on your earbuds. 2. The LED indicator flash red and blue to indicate earbuds are in pairing mode. that your lights will alternately 3. Go to the Bluetooth phone. Make sure that Bluetooth Connect to the device listed menu on your is turned on. settings as "wireless 4. The LED indicator indicate that your earbuds your phone. are paired with lights will flash blue to slowly earbuds."
Tap the Next Track Button to advance playlist. to the next track in a Tap the Last Track Button to return to the last track in a playlist. VOLUME+ 4+
VOLUME-4 Changes or modifications not expressly approved by t authority to operate the he party responsible for comp equipment. liance could void the u ser's This equipment co mplies with FCC R F radiation exposure limits set forth fo r an uncontrolled environment. This device complies with Part 15 of the FCC Rules. Operat this device ma including interference t 2) this hat may cause undesir ion is sub device must a y not cause harmful i nterference, and (
interference received, ccept any ed operation. ject to the following two conditions:
(1) ound to comply This equipment has been tested and f Part 15 of the FCC Rules. These limits are designed t interference in a r energy and, if not installed and used in accordance with the instructions, m radio communications. However installation. adiate radio frequency harmful interference to e that interference will not occur in ment generates, uses and can r igital device, pursuant to tection against harmful with the limits for a C
, there is no guarante lation. This equip esidential instal o provide reasonable pro a particular lass B d ay cause Charging M;cro USB lL_j n Plug USB Plug USB charging 1. The included cable has a Micro USB plug and a standard plug. IBluetooth Pairing USB
PRESS& HOLD 2-3 SEC
g Your Earbuds 1. Press and hold the power button power on or power off your earbuds. to 2.Press or pause a track. the PLAY/PAUSE button to play 3. Press the ANSWER button to answer or end a phone call. Press and hold the ANSWER button to reject a phone call. 4. Quickly twice to activate tap the VOICE ASSISTANT button Siri or Google Voice Assistant. ANSWERI"'
VOICE ASSISTANT 1@ 1 r r
=QC+ @ - ))]=
Press and hold the Volume + Button to increase the volume. Press and hold the Volume -Button to decrease the volume. If this equipment does cause harmful interf turning the equipment off following measures:
-Reorient
-Increase
-Connect the equipment between the equipment into an outlet on a circuit or relocate the separation and receiver different erence to radio or televisio the receiving antenna. from that to which the receiver is connected.
-Consult the dealer or an experienced radiofTV technician for help. n reception, which can be dete rmined by and on, the user is encouraged to try to correct the interference by one or more of the