CONGRATULATIONS!
Youve purchased the finest in natural lighting technology with your new product. PRODUCT REGISTRATION FORM Please complete the enclosed Product Registration Form and return it today by mail, or register online by going to:OttLite.com/warranty 1. Remove lamp from packaging placing lamp base (A) flat on a steady surface. 2. Connect the AC Adapter input (C) into the connector (H) in the rear-bottom of the lamp. 3. Plug the A/C adapter (B) into a standard household 120V AC outlet. Note: Only use with the supplied AC adapter to avoid damage or fire. 4. Turn the lamp ON & OFF using power switch (D) located in the front-upper side of base (A). Power switch (D) is a touch switch that controls the dimmer function for 3 levels of brightness. 5. To power LED settings, slightly touch the switch to achieve the following:
turn lamp ON to first lower-brightness; touch the switch once;
for medium-brightness; touch the switch twice;
or high-brightness; touch the switch three-times;
to turn lamp OFF; touch the switch four-times. 6. Wireless Charger (E) for Qi certified devices is on a separate stand next to the mirror. See Wireless Charging Instruction section for details. 7. To position the mirror simply rotate to desired position needed. Note: The mirror is double sided with a standard mirror on one side and a magnification mirror on the other. WIRELESS CHARGING INSTRUCTIONS:
Wireless charging requires the use of a Qi-Certified device. To determine if your device is Qi-Certified, please visit the Wireless Power Consortium website. To wireless charge a device, perform the following:
Place the device, which supports the Qi wireless charging standard, in the horizontal position on the charging stand. When the phone is centered on the Qi wireless charging emblem the blue indicator (F) will come on indicating charging. NOTE: If the BLUE light is blinking this indicates the device is not charging and needs to be properly centered. Monitor the battery status of your device to determine when charging is complete. CAUTION! DEVICE MAY BECOME WARM DURING CHARGING. THIS IS NORMAL AND PART OF THE PROCESS. CHARGING TIMES VARY BY DEVICE. SAFETY WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS 1. Never use with an extension cord unless the plug can be fully inserted into the receptacles in the extension cord. 2. Do not alter the plug. 3. The mirror head included with this unit cannot be replaced by the consumer. 4. INDOOR USE ONLY NOTE: The important safety instructions appearing in this instruction sheet are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution, and care must be used with any electrical product. CAUTION! IF THE EXTERNAL FLEXIBLE CABLE OR CORD OF THIS PRODUCT IS DAMAGED, IT SHALL BE EXCLUSIVELY REPLACED BY THE MANUFACTURER OR ITS SERVICE AGENT OR A SIMILAR QUALIFIED PERSON IN ORDER TO AVOID A HAZARD. INDOOR USE ONLY. CAUTION! THE LIGHT SOURCE OF THIS PRODUCT IS NOT REPLACEABLE;
WHEN THE LIGHT SOURCE REACHES ITS END OF LIFE THE WHOLE PRODUCT SHALL BE REPLACED. FCC PART 15 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. FCC/IC RF RADIATION EXPOSURE STATEMENT CAUTION:
To maintain compliance with the RF exposure guidelines, place the product at least 20cm from nearby persons. IC CANADA This device contains licence-exempt transmitter(s)/receiver that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1. Lappareil ne doit pas produire de brouillage;
2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. DCLARATION D'EXPOSITION AUX RADIATIONS FCC / IC RF ATTENTION:
Pour rester en conformit avec les consignes d'exposition aux RF, placez le produit au moins 20 cm des personnes proches - Caractres chinois traditionnels . CAN RSS-216/CNR-216 CAN ICES-005 (B)/NMB-005 (B) POWER ADAPTOR SPECIFICATION:
Input: AC 100-240V, 50/60 Hz, 1.4A Output: 13V DC, 1.8A with a male DC plug QI CHARGER SPECIFICATION:
Output: 5V, 1A or 5Watts THIS LAMP CONTAINS a 5V, 2.1A USB charging port located (J) at the rear of the base. USB port can charge items such as tablets, cellular phones, etc. The Qi symbol is a trademark of the Wireless Power Consortium