all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual | Users Manual | 1.22 MiB | July 05 2004 / June 05 2004 | |||
1 2 | RF Exposure Info | March 09 2004 / June 05 2004 | ||||||
1 2 | RF Exposure Info | March 09 2004 / June 05 2004 | ||||||
1 2 | Cover Letter(s) | July 05 2004 / June 05 2004 | ||||||
1 2 | External Photos | July 05 2004 / June 05 2004 | ||||||
1 2 | ID Label/Location Info | July 05 2004 / June 05 2004 | ||||||
1 2 | Internal Photos | July 05 2004 / June 05 2004 | ||||||
1 2 | Cover Letter(s) | July 05 2004 / June 05 2004 | ||||||
1 2 | RF Exposure Info | July 05 2004 / June 05 2004 | ||||||
1 2 | RF Exposure Info | July 05 2004 / June 05 2004 | ||||||
1 2 | RF Exposure Info | July 05 2004 / June 05 2004 | ||||||
1 2 | RF Exposure Info | July 05 2004 / June 05 2004 | ||||||
1 2 | RF Exposure Info | July 05 2004 / June 05 2004 | ||||||
1 2 | RF Exposure Info | July 05 2004 / June 05 2004 | ||||||
1 2 | Test Setup Photos | July 05 2004 / June 05 2004 | ||||||
1 2 | Test Report | July 05 2004 / June 05 2004 | ||||||
1 2 | Test Report | July 05 2004 / June 05 2004 | ||||||
1 2 | Test Report | July 05 2004 / June 05 2004 | ||||||
1 2 | Cover Letter(s) | July 05 2004 / June 05 2004 | ||||||
1 2 | Test Report | July 05 2004 / June 05 2004 | ||||||
1 2 | Test Report | July 05 2004 / June 05 2004 | ||||||
1 2 | Test Report | July 05 2004 / June 05 2004 |
1 2 | User Manual | Users Manual | 1.22 MiB | July 05 2004 / June 05 2004 |
Declaration of Conformity Hereby, Sharp Telecommunications of Europe Ltd, declares that this GX15 is in compliance with the essential require-
ments and other relevant provisions of Directive 1999/5/
EC. A copy of the original declaration of conformity can be found at the following Internet address:
http://www.sharp-mobile.com Introduction Congratulations and thank you for choosing the GX15. About This User Guide This user guide is carefully designed to help you learn about your phones features and operations quickly and effectively. NOTICE We strongly recommend that you keep separate permanent written records of all important data. Data may be lost or altered in virtually any electronic memory product under certain circumstances. Therefore, we assume no responsibility for data lost or otherwise rendered unusable, whether as a result of improper use, repairs, defects, battery replacement, use after the specified battery life has expired or any other cause. We assume no responsibility, directly or indirectly, for financial losses or claims from third parties resulting from the use of this product and any of its functions, such as stolen credit card numbers, the loss or alteration of stored data, etc. All company and/or product names are trademarks and/or registered trademarks of their respective holders. Screen layout illustrated in this user guide may differ from the actual one. The information described in this user guide is subject to change without notice. All the functions described in this user guide may not be supported in all networks. We assume no responsibility for downloaded contents, information, etc. from network. Occasionally, a few black or bright pixels may appear on the screen. Please note that this will not have any impact on any of the features or performance. Copyright According to copyright laws, the reproduction, alteration and use of material which is protected by copyright (music, pictures, etc.) is only permitted for personal or private use. If the user is not in possession of more extensive copyright or has not received the explicit permission from the copyright owner to reproduce, alter or use a copy which has been made or modified in this way, this is considered to be a violation of the copyright laws and gives the copyright owner the right to claim for damages. For this reason, avoid the illegal use of material which is protected by copyright. Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries. Introduction 1 Powered by JBlend Copyright 1997-
2004 Aplix Corporation. All rights reserved. JBlend and all JBlend-based trademarks and logos are trademarks or registered trademarks of Aplix Corporation in Japan and other countries. Powered by Mascot Capsule/Micro3D Edition Mascot Capsule is a registered trademark of HI Corpora-
tion 2002-2004 HI Corporation. All Rights Reserved. Licensed by Inter Digital Technology Corporation under one or more of the following United States Patents and/or their domestic or foreign counterparts and other patents pend-
ing, including U.S. Patents: 4,675,863: 4,779,262:
4,785,450 & 4,811,420. Licensed under U.S. Patent 4,558,302 and foreign counter-
parts. T9 Text Input is licensed under one or more of the following:
U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480, 5,945,928, and 6,011,554; Australian Pat. No. 727539; Canadian Pat. No. 1,331,057; United Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No. HK0940329; Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0 842 463 (96927260.8) DE/
DK, FI, FR, IT, NL,PT.ES,SE,GB; Republic of Korea Pat. Nos. KR201211B1 and KR226206B1; and additional patents are pending worldwide. 2 Introduction Bluetooth is a trademark of the Bluetooth SIG, Inc. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sharp is under license. Other trademarks and trade names are those of their respective owners. CP8 PATENT This product is licensed under the MPEG-4 Visual Patent Portfolio License for the personal and non-commercial use of a consumer to (i) encode video in compliance with the MPEG-4 Video Standard (MPEG-4 Video) and/or (ii) decode MPEG-4 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a licensed video provider. No license is granted or implied for any other use. Additional information may be obtained from MPEG LA. See http://www.mpegla.com. This product is licensed under the MPEG-4 Systems Patent Portfolio License for encoding in compliance with the MPEG-
4 Systems Standard, except that an additional license and payment of royalties are necessary for encoding in connection with (i) data stored or replicated in physical media which is paid for on a title by title basis and/or (ii) data which is paid for on a title by title basis and is transmitted to an end user for permanent storage and/or use. Such additional license may be obtained from MPEG LA, LLC. See http://
www.mpegla.com for additional details. A data synchronization function for synchronizing the Contacts List and schedule entries with Microsoft Outlook or Outlook Express on a PC. A schedule alarm for creating and sending schedule entries with alarm settings. Useful Functions and Services Your phone offers you the following features:
A built-in digital camera for taking pictures and video clips. A message function for reading and creating SMS messages. MMS (Multimedia Messaging Services) for personalising your phone in various ways. A WAP browser for accessing information on the mobile Internet. Java applications. You can also download various applications from Vodafone via the mobile Internet. A melody editing function for creating original ringtones using up to 32 voices. A voice recorder function for recording and playing back voice clips. A Bluetooth wireless technology interface for establishing contact and transmitting data with certain devices. You can transmit pictures, sounds, and video clips to OBEX-enabled phones. An infrared interface for data communication. You can transmit pictures, sounds, and video clips to OBEX-enabled phones. Introduction 3 Table of Contents Introduction ................................................. 1 Useful Functions and Services .....................3 Your Phone .................................................. 7 Optional Accessories ...................................7 Getting Started ............................................ 8 Inserting the SIM Card and the Battery .....10 Charging the Battery ..................................12 Turning Your Phone On and Off ...............13 Keypad Lock ..............................................14 Display Indicators ......................................15 Navigating Functions ................................ 17 Call Functions ............................................ 18 Making a Call .............................................18 Speed Dialling ............................................18 Redialling ...................................................19 Answering a Call .......................................19 Incall Menu ................................................20 Entering Characters .................................. 24 Changing the Input Languages ..................25 Changing the Input Method .......................25 Using Text Templates ................................26 4 Table of Contents Using the Menu ..........................................27 List of Menu Functions ..............................28 Contacts List .............................................29 Selecting the Storage Memory ...................29 Changing the List Displayed ......................29 Add New Contact ......................................30 Copying Contacts List Entries between SIM Card and Handset ...............................30 Finding a Name and Number .....................31 Dialling from the Contacts List ..................31 Editing Contacts List Entries .....................32 Deleting Contacts List Entries ...................32 Viewing Groups .........................................32 Memory Status ...........................................33 Speed Dial List ...........................................33 Sending a Contacts List Entry ....................34 Receiving a Contacts List Entry .................34 Camera .......................................................35 Take Picture ..............................................35 Record Video ............................................39 Messages .................................................. 43 Multimedia (MMS) ...................................43 Text (SMS) ................................................48 Cell Broadcasts ..........................................51 Vodafone live! ........................................... 53 Starting the WAP Browser .........................53 Navigating a WAP Page .............................54 My Items .................................................... 57 Pictures ......................................................57 Games & More ..........................................59 Sounds .......................................................60 Videos .......................................................62 Text Templates ..........................................63 Memory Status ..........................................64 Games & More .......................................... 65 Applications ..............................................65 Screensavers ..............................................66 More Games ..............................................67 Settings ......................................................67 Java Information ....................................69 Applications .............................................. 70 SIM Application ........................................70 Alarms .......................................................70 Calculator ................................................. 71 Voice Recorder ......................................... 72 Melody Editor ........................................... 73 Phone Help ............................................... 77 Calendar ....................................................78 Contacts ....................................................81 Call Log .................................................... 81 Speed Dial List ......................................... 82 My Numbers ............................................. 82 Call Timers ............................................... 82 Data Counter ............................................. 82 Call Costs .................................................. 83 Settings .....................................................84 Profiles ...................................................... 84 Setting the Display ................................... 88 Call Settings .............................................. 91 Date & Time ............................................. 94 Changing the Language ............................ 95 Connectivity ............................................. 95 Network .................................................... 98 Security ................................................... 100 Master Reset ........................................... 101 Table of Contents 5 Connecting GX15 to Your PC ................. 102 System Requirements ..............................102 GSM/GPRS Modem ................................102 Handset Manager .....................................103 Software Installation ................................103 Note ..........................................................103 Troubleshooting ...................................... 105 Safety Precautions and Conditions of Use ............................................................ 107 CONDITIONS OF USE ..........................107 ENVIRONMENT ....................................110 PRECAUTIONS CONCERNING VEHICLE USE ........................................110 SAR ..........................................................111 PRECAUTIONS FOR USE IN USA ......111 Index ......................................................... 114 6 Table of Contents Your Phone Please check the following carefully. Your phone should come complete with:
GSM 900/1800/1900 GPRS phone Rechargeable Li-ion battery AC charger CD-ROM User guide Quickstart guide Optional Accessories Li-ion Spare battery (XN-1BT30) Cigarette lighter charger (XN-1CL30) USB data cable (XN-1DC30) AC charger (XN-1QC30, XN-1QC31) Personal handsfree kit (XN-1ER20) The above accessories may not be available in all regions. For details, please contact your dealer. Your Phone 7 Getting Started 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1. Earpiece 2. Navigation Keys (Arrow Keys):
a b c d Moves cursor to select menu items, etc. Up/Down arrow keys: Displays Contacts List Left arrow key:
Right arrow key:
8 Getting Started entries in stand-by mode. Displays list of Applications in stand-by mode. Displays list of Saved Pictures in stand-by mode. 16 17 18 3. Centre Key:
4. Left Soft Key:
5. Send Key:
A D 19 20 21 22 Displays Main menu in stand-by mode and executes functions. Executes the function at the bottom left of the screen. Makes or accepts calls, views the call in stand-by mode. 6. Voice Mail Key:
G 7. * /Shift Key:
P 8. Display 9. Right Soft Key:
C 10.End/Power Key:
F 11.Keypad 12.# Key:
R Press and hold this key to connect to the Voice mail centre automatically.
(Depends on the SIM card.) Switches character case among four modes: Abc, ABC, 123 and abc. Executes the function at the bottom right of the screen. Used to access Vodafone live! by opening the browser in stand-by mode. Ends a call, turns power on/
off. Switches symbol screens. Press and hold this key on the text entry screen to shift text input method between multi-tap and T9 mode. Press and hold this key during stand-by to switch Profiles settings between Normal and Silent mode. 13.Side-Up/Side-Down Keys:
V W 14.External Connector:
15.Microphone 16.Infrared Port:
17.Camera Key:
Moves cursor to select menu items, adjusts earpiece volume, etc. Used to connect either the charger or USB data cable. Sends and receives data via infrared. Starts the digital camera in stand-by mode. Takes pictures or records videos in viewfinder mode. 18.Handsfree Kit Connector 19.RF Connector 20.Camera 21.Self-Portrait Mirror: For taking a self-portrait. 22.Battery Cover Getting Started 9 Inserting the SIM Card and the Battery 1. Slide off the battery cover (
). 1 2 3. Hold the battery so that the metal contacts of the battery are facing down, slide the guides on the top of the battery into the battery slots insert it
, and then
. 2 1 2. Slide the SIM card into the SIM holder. 4. Replace the battery cover and slide it as shown below. SIM card Note Make sure that only 3V SIM cards are used. Make sure that the standard accessory battery
(XN-1BT30) is used. 10 Getting Started Removing the SIM Card and the Battery 1. Make sure to turn off your phone and disconnect the charger and other accessories. Slide off the battery cover (
). 1 2 2. Pick up the battery using the protruding edge and remove the battery from the phone. 3. Hold down gently whilst sliding the SIM card out of the SIM holder
. 1 2 Battery Disposal The device is supported by a battery. In order to protect the environment, please read the following points concerning battery disposal:
Take the used battery to your local waste depot, dealer or customer service centre for recycling. Do not expose the used battery to an open flame, into water or dispose with the household waste. Getting Started 11 Charging the Battery You must charge the battery for at least 2 hours before using your phone for the first time. Using the Charger 1. Remove the cover of the external connector, and connect the charger to the external socket located at the bottom of the phone by pressing both sides indicated with arrows. Connect the charger to an AC outlet. Keep the cover in a safe place so as not to lose it. Note Charging time may vary depending on the state of the battery and other conditions. (See Battery on page 108.) To Disconnect the Charger Push and hold the side buttons of the charger, then disconnect the charger from the external socket of the phone. 2. When charging is complete, the battery indicator icon displays the full charge status. Unplug the charger from the AC outlet, then unplug the charger connector from the phone. Put the cover back. Note Do not use any non approved charger, this may damage your phone and invalidate any warranty, please see Battery on page 108 for details. When the phone is charging, the animated battery status icon (
displays the current status. Standard charging time: Approx. 2 hours.
) in the upper right of the screen 12 Getting Started To Charge Using the Cigarette Lighter Charger The optional cigarette lighter charger supplies power for charging from the cigarette lighter socket of a car. Battery Level Indicator The current battery level is displayed in the upper right hand side of the screen. Low Battery During Use When the battery is running low, an alarm will sound and the If you are using your phone and you hear the low battery alarm, attach your charger as soon as possible. The phone may not be able to continue normal operation if you continue to use it. The battery may only last approximately five minutes before the phone itself powers down during a call. is displayed on the screen. Battery Indicators Charge Level Sufficiently charged Partially charged Charging recommended Charging required Empty Turning Your Phone On and Off To turn the power on, press and hold F for approximately 2 seconds. The stand-by screen is displayed. To turn the power off, press and hold F for approximately 2 seconds. To Enter the PIN Code If activated you are asked to enter a PIN (Personal Identification Number) code after turning on your phone. 1. Enter your PIN code. 2. Press Note If your PIN code is entered incorrectly three times in
. a row, the SIM card is locked. See Enabling/
Disabling the PIN Code on page 100. Getting Started 13 Tip Emergency numbers (112, etc.) can be input and dialled regardless of the keypad lock. To lock the keypad automatically, see Auto Keypad Lock on page 100. To Copy Contacts List from the SIM Card When you insert the SIM card into your phone for the first time and start the Contacts List application, you are asked whether you wish to copy Contacts List entries on the SIM card. Follow the on-screen instructions, or you can do it later using the Contacts List menu as follows:
Contacts Contacts List [Options]
Advanced Copy All Entries 1. Select From SIM to Handset. Keypad Lock You can lock the keypad to prevent it from being pressed accidentally. Locking the Keypad 1. Press P, then [LockKeys] during stand-by. The soft and centre keys are not displayed. To unlock, press P, then [Yes]. 14 Getting Started Display Indicators Status indicators Left soft key Right soft key Centre key/Navigation keys Status Indicators 1.
2. 3. 4. 5. 6. 7.
(No display)/
8.
Strength of received signal / Service out of range GPRS enabled and within range flashes during GRPS transmission.
: Alerts [Text message / Multimedia message / WAP]
Current application [executed (colour) /
suspended (grey)]
Current profile [Normal / Meeting /
Activity / Car / Headset / Silent]
T9 text input method enabled
Current text input method [First letter upper case / Upper case / Lower case /
Numeric]
Diverts (p. 91) set to All Calls Getting Started 15
25. 26.
Schedule entry with reminder alarm
[enabled / disabled]
Keypad Lock (p. 14) enabled 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24.
Secured WAP page displayed Call incoming Call in progress Current WAP or MMS communication mode [CSD / GPRS]
Battery level Roaming outside network Ringer Volume (p. 84) set to Silent Vibration alert (p. 85) enabled USB data cable connected Infrared connection [enabled /
communicating]
Bluetooth wireless setting [enabled /
handsfree headset / handsfree car kit]
Data communication mode enabled Fax communication mode enabled Outbox contains unsent multimedia messages Voicemail message alert Daily alarm enabled 16 Getting Started to commit your Navigating Functions All applications are accessed from the Main menu. To open the Main menu, press the centre key (
) during stand-by. To launch applications, you will need to highlight menu items, and make selections. To select a menu item
(indicated in quotation marks), move the cursor using a, b, c and d, and press selection. In certain procedures, you will need to press one of the soft keys (indicated in square brackets), which are displayed at the bottom left and right of the screen. Press the corresponding soft key (A or C). To return to the previous screen, press the right soft key if it displays Back. To close the Main menu, press the right soft key if it displays Exit. Each section in this user guide starts with a list of items you will need to select in order (indicated in italics) before performing the procedures shown. Select each item to reveal the next set of items that you have to select. Open subsection items after opening those listed in the main section. Example:
Contacts Contacts List [Options]
Advanced Navigating Functions 17 Call Functions Making a Call 1. Enter the area code and the phone number you wish to dial and press D to dial. If you enter the wrong number, press [Clear] to delete the number to the left of the cursor. Emergency Calls 1. Enter 112 or 911 (international emergency number) using the keypad and press D to dial. Note Emergency calls may not be available on all mobile phone networks when certain network services and/
or phone features are in use. Contact your network operator for more information. This Emergency number can normally be used to make an emergency call in any country, with or without a SIM card inserted, if a GSM network is within range. International Calls 1. Press and hold P until a + (international dialling prefix) sign is displayed. 2. Enter the country code, followed by the area code
(without the leading zero) and the phone number, and press D to dial. Speed Dialling Up to 9 phone numbers from the Contacts List memory
(Handset and SIM) can be assigned to speed dials. You can call the numbers using the digit keys (H to O and Q). For details on setting the Speed Dial List, see Speed Dial List on page 33. 1. To dial a number using the speed dial, press and hold any of the digit keys (H to O and Q). The phone number stored in the Speed Dial List is dialled. 18 Call Functions Redialling You can redial numbers in the call log. Select from specific categories or All Calls. Specific category contains up to 10 numbers and the All Calls list contains up to 30. 1. Press D during stand-by. 2. Select the category from All Calls, Dialled Numbers, Missed Calls or Received Calls. To switch logs, press c or d. 3. Select the phone number you wish to call. 4. Press D to redial the call. Automatic Redialling This setting allows you to automatically redial the number if the first attempt was unsuccessful because the called party was busy. If you wish to stop redialling, press F or [End]. To Set the Auto Redial Function Settings Call Settings Auto Redial 1. Select On or Off. Note When you receive an incoming call, the Auto Redial function is interrupted. Automatic redialling is not available for fax and data calls. Answering a Call When an incoming call is detected, the phone rings. 1. Press D, or [Answer] to answer the call. Or press any key except F and [Busy] when the Any Key Answer function is enabled. Set the Any Key Answer function in the profile of each mode.
(p. 88) Tip When the Personal handsfree kit (option) is connected to the phone, you can answer calls by pressing the Answer button. If you have subscribed to the Calling Line Identification (CLI) service and the callers network sends the number, the callers number is displayed on the screen. If the callers name and number are stored in the Contacts List, the callers name and phone number are displayed on the screen. Call Functions 19 Incall Menu Your phone has additional functions available whilst a call is in progress. Adjusting the Earpiece Volume During a call, you can adjust the earpiece volume (and handsfree volume, if connected). 1. During a call, press the side-up or side-down key to display the Earpiece Volume screen. 2. Press the side-up key or a to increase the volume of the call or press the side-down key or b to decrease the volume. Five levels (level 1 to 5) are selectable. when the volume is set to the desired 3. Press level. The phone returns to the in-call screen automatically if left unoperated. If the number is a restricted number, the display shows Withheld. When receiving a call from the person whose picture is registered in the Contacts List, receiving display and the picture are displayed alternately. Rejecting an Incoming Call 1. Press F or press and hold the side-up or side-
down key whilst the phone is ringing to reject a call you do not wish to answer. Letting the Caller Know You are Unavailable 1. Press [Busy] whilst the phone is ringing to send a busy tone to the caller of an incoming call letting them know that you cannot answer the call. 20 Call Functions Putting a Call on Hold This function allows you to manage two calls at the same time. If you wish to make another call whilst you are talking to someone, you can put the current call on hold to call someone else. To Make Another Call during a Call 1. During a call, press [Options]. 2. Select Hold. The current call is put on hold. 3. To retrieve a call, press [Options] and select Retrieve. 4. Enter the phone number you wish to make another call to, then press D. Tip You can also make another call by entering the phone number during a call instead of steps 1 and 2. The current call is automatically put on hold. Call Waiting This service notifies you of another incoming call whilst you have a call in progress. 1. During a call, press [Options] and select Hold &
Answer to answer the second call. The first call is put on hold and you can now talk to the second caller. 2. Press [Options] and select Swap Calls to switch between the two calls. 3. Press [Options] and select Release Call to end the current call and return to the held call. Note You need to set Call Waiting to On if you use the Call Waiting service (p. 92). Call Waiting service may not be available on all networks. Contact your network operator for more information. If you do not wish to answer the second call, press
[Busy], or press [Options], and select Busy or Reject, in step 1. If Reject is selected, the call log of the second call is saved as a missed call. Call Functions 21 Note Conference call service may not be available on all networks. Contact your network operator for more information. You have more options for the Conference call in step 3:
To put all participants on hold, select Conference Hold All. To put all participants except the current call on hold, select Private. To end the call with all participants, select Release All. To disconnect from the conference call but still allow the other participants to continue talking together, select Transfer. To put the current call on hold and continue to have a conference call with the remaining participants, select Exclude. To reject adding more participants to the current party, select Reject, or you can send the busy tone by selecting Busy. Accessing SMS Menu During a Call 1. During a call, press [Options] and select Text. The following options are available: Create Message to make an SMS, or Inbox, Sent or Drafts to access these folders. For details on SMS, see Text (SMS) on page 48. Conference Call Conference call is a call with more than 2 participants. You may include up to 5 participants in a conference call. To Make a Conference Call To make a conference call, you must have one active call and one held call. 1. During a call, press [Options] and select Multiparty to answer the second call. 2. Select Conference All to join the conference call. 3. Press F to end the conference call. 22 Call Functions To Add New Participants to the Conference Call 1. Press [Options] and select Dial. 2. Enter the number you wish to include in the conference call and press D to dial. 3. Press [Options] and select Multiparty. 4. Select Conference All to join the conference call. If you wish to add other participants, repeat steps 1 to 4. To End the Call with a Conference Call Participant 1. During a conference call, highlight the person that you wish to disconnect from the conference call. 2. Press [Options] and select Release Call. To Have a Private Conversation with One of the Participants If you wish to have a private conversation with one of the participants, you may select the participant from the conference list and put the other participants on hold. 1. During a conference call, select the person that you wish to talk to. 2. Press [Options] and select Multiparty. 3. Select Private. 4. Once you have finished the private conversation, press [Options] and select Multiparty. 5. Select Conference All to return to the conference call. Muting the Microphone 1. During a call, press [Mute] to mute the microphone. To unmute the microphone, press [Unmute]. Call Functions 23 Entering Characters When entering characters to create Contacts List entries, text messages or multimedia messages, etc., press the corresponding keys. In multi-tap input method, press each key until the desired character is displayed. For example, press H once for the letter A or twice for the letter B. Table of Characters Pressing each key scrolls characters in the following order. The order varies depending on the language selected. English Mode
(apostrophe) @ :1 Upper Case Characters Lower Case Key Characters G . (full-stop) , (comma) - (hyphen) ? !
H ABC2 I DEF3 J GHI4 K JKL5 L MNO6 mno6 abc2 ghi4 def3 jkl5 24 Entering Characters 1 2 3 4 5 6 Upper Case Characters Lower Case Characters pqrs7 Key M PQRS7 N TUV8 O WXYZ9 wxyz9 Q (space)+ = < > $ % &0 P Switches character case among four modes:
tuv8 Numeric 7 8 9 0 Numeric R
Abc, ABC, 123 and abc.
(space)
G-O: Press and hold to enter 0 - 9 numbers. Q P:
R:
Press and hold to enter *. Press and hold to shift between multi-
tap and T9 mode. Changing the Input Languages You can change the input language on the text entry screen. 1. On the text entry screen, press [Options]. 2. Select Input Language. If Input Language is not displayed, select Text Options and then select Input Language. 3. Select the desired language. Changing the Input Method T9 Text Input T9 text input method is a shortcut to enter text easily and quickly. 1. On the text entry screen, press and hold R to enter T9 mode. 2. Press [Options]. 3. Select Input Method. If Input Method is not displayed, select Text Options and then select Input Method. 4. Select the input mode (Abc, ABC, abc, 123). 5. Press each key once for any letter you require on that key. To enter the word How, press J L O. 6. If the word shown isnt the one you want, press a or b until you highlight the correct one. to select the word. 7. Press Note If the correct word is not shown in step 6, enter the correct word again after switching to the multi-tap input method. Tip If you press Q instead of step 7, a space is inserted next to the selected word. Symbols and Punctuations 1. On the text entry screen, press [Options]. 2. Select Add Symbol. If Add Symbol is not displayed, select Text Options and then select Add Symbol. 3. Select the desired symbol. Entering Characters 25 1. On the text entry screen, move the cursor to the point you wish to insert the template. 2. Press [Options]. 3. Select Text Template. If Text Template is not displayed, select Text Options and then select Text Template. 4. Select the desired text template. The selected text template is inserted. My Dictionary You can create your own word list for T9 text input. 1. On the text entry screen in T9 mode, press
[Options]. 2. Select My Dictionary. If My Dictionary is not displayed, select Text Options and then select My Dictionary. 3. Select Add New Word and enter a new word. To edit a word in the list 1. On the text entry screen in T9 mode, press
[Options]. 2. Select My Dictionary. If My Dictionary is not displayed, select Text Options and then select My Dictionary. 3. Select the desired word. 4. Press [Options] and select Edit. 5. Modify the word. Using Text Templates You can use the sentences registered in Text Templates when entering characters. For details on creating the text template, see Adding Phrases to Text Templates on page 63. 26 Entering Characters Using the Menu Accessing Applications 1. Press during stand-by. The Main menu is displayed. 2. Navigate to required location. 3. Press to access function. Shortcut Keys You can shortcut to the specified menus by pressing and digit keys for the menus corresponding number on the Main menu. See the following table for reference. Shortcuts are listed in the headings of this manual. For example: M 9-6. Example: To Access Language Sub Menu Using Shortcut Keys Press O L. Note The shortcut keys work for the first three menu levels only. Using the Menu 27 List of Menu Functions Menu No./
Main Menu 1 Games & More 2 Vodafone live!
3 Applications 4 Messages Menu No./
Sub Menu1 1 Applications 2 Screensavers 3 More Games 4 Settings 5 Java Information 1 Vodafone live!
2 Games 3 Ringtones 4 Pictures 5 News 6 Sport 7 Find & Seek 8 Chat 9 Search 1 SIM Application*
2 Alarms 3 Calculator 4 Voice Recorder 5 Melody Editor 6 Phone Help 1 Create Message 2 Multimedia 3 Text 4 Media Album 5 Vodafone Mail 6 Messenger 7 Cell Broadcasts 8 Area Info 28 Using the Menu Menu No./
Main Menu 5 Camera 6 My Items 7 Calendar 8 Contacts 9 Settings Menu No./
Sub Menu1 1 Take Picture 2 Record Video 1 Pictures 2 Games & More 3 Sounds 4 Videos 5 Text Templates 6 Bookmarks 7 Memory Status 1 Contacts List 2 Add New Contact 3 Call Log 4 Speed Dial List 5 My Numbers 6 Call Timers 7 Data Counter 8 Call Costs 1 Profiles 2 Display 3 Sound 4 Call Settings 5 Date & Time 6 Language 7 Connectivity 8 Network 9 Security 0 Master Reset
* Depends on SIM card contents.
(M 8-1) Contacts List You can store the phone numbers and e-mail addresses of your friends, family and colleagues in the Contacts List. Your phone can store up to 640 phone numbers. In a Contacts List, you can store the following items. Items stored in the handset memory First Name Last Name Tel Private Tel Office Tel Mobile Private E-mail Private E-mail Business Address Note Tip There is no character limit for entering text into the above fields when using the internal memory. Items stored in the SIM memory Name:
The number of characters that can be stored differs depending on the SIM card you use. Using the infrared or Bluetooth wireless function, you can send the Contacts List entry to a PC to share the same entries. Selecting the Storage Memory Contacts Contacts List [Options]
Advanced Save New Contacts 1. Select Contacts location from Handset Memory, SIM Memory or Choose before Saving. Tip Choose before Saving prompts you to choose the memory every time you save a new entry. Changing the List Displayed Contacts Contacts List [Options]
Advanced Contacts Location 1. Select from Handset Memory, SIM Memory or Both. Phone number: Up to 40 digits Contacts List 29
(M 8-2) Add New Contact You can choose either the phone or SIM card memory locations to store the new entry. For switching locations, see Selecting the Storage Memory on page 29. The amount of phone numbers that you can store to the SIM card is dependent on its capacity. Contact your network operator for details. Contacts Add New Contact If you select the Choose before Saving option for the memory to be used, the selection is between To Handset and To SIM. 1. Select the field you wish to fill in, and enter the relevant information. 2. Press [Save] when finished. Tip To create an entry, at least one field must be filled. If you create a new entry on the SIM card, you need to enter a phone number. Adding a Thumbnail to Entries Contacts Contacts List 1. Highlight the desired entry. 2. Press [Options] and select Edit. 3. Select Picture. 30 Contacts List 4. Select the desired picture. 5. Press [Save] when finished. Note If you delete a picture in Saved Pictures, the corresponding thumbnail is also deleted. If the picture size exceeds 120 dots (W) or 160 dots
(H), specify the area you wish to display. Copying Contacts List Entries between SIM Card and Handset Contacts Contacts List [Options]
Advanced Copy All Entries 1. Select From SIM to Handset or From Handset to SIM. Note When you insert the SIM card into your phone for the first time and start the Contacts List application, the confirmation screen appears automatically, asking you if you wish to copy or not. The number of Contacts List entries to be copied varies depending on the SIM capacity. Copying a Single Entry from Handset to SIM Card Contacts Contacts List 1. Select the desired entry. 2. Highlight the desired phone number. 3. Press [Options] and select Copy to SIM. Finding a Name and Number Contacts Contacts List 1. Enter the first few letters of the name. Search results are displayed in alphabetical order. 2. Select the desired entry. Tip You can select the Contacts location from Handset Memory, SIM Memory or Both before searching. To view the details of the item such as address, highlight the desired item, press [Options]and select View. Dialling from the Contacts List Contacts Contacts List 1. Highlight the desired entry and press D. Tip You can also dial the desired phone number by pressing the digit key corresponding to the position the entry is on the list. If more than one phone number is registered for the entry, select the desired phone number after step 1 and press D. You can also dial from the details screen of the Contacts List. On the details screen, select the desired phone number and press D. If you select SIM Memory for the Contacts Location option in Contacts List menu (p. 29), only one phone number entry is displayed. Contacts List 31 Editing Contacts List Entries Contacts Contacts List [Options] Edit 1. Select the field you wish to edit, and modify the information. 2. Press [Save] when finished. Deleting Contacts List Entries Deleting All Contact Entries Contacts Contacts List [Options]
Advanced Delete All Entries 1. Enter your handset code. 2. Select Handset Entries or SIM Entries. The default handset code is 0000. For details on changing the handset code, see To Change Handset Code on page 101. Deleting a Contact Entry Contacts Contacts List 1. Highlight the desired entry. 2. Press [Options] and select Delete. Viewing Groups You can set group icons when storing Contacts entries so that you can easily find and edit them. Contacts Contacts List [Options]
Advanced Group View Groups 1. Select the desired group. appears next to the selected group. Select the group again to cancel, and the checkbox becomes unchecked. Tip Press [Options] and select Current Only to view only the selected group or Select All to view all groups. Group Call Different ringtones can be set for each group. When you purchase this phone, groups are set to off. If you do not set a group ringtone, the ringtone assigned in the Settings menu is used. Contacts Contacts List [Options]
Advanced Group Group Call 1. Select the desired group. 2. Select Switch On/Off. 3. Select On or Off. 4. Select Assign Ringtone. 32 Contacts List 5. Select Preset Sounds or My Sounds. 6. Select the desired ringtone. For details on selecting a ringtone, see Assigning Ringtone on page 85. 7. Select Vibration and select from On, Off or On & Link to Sound. For details on selecting a vibration, see Vibration on page 85. 8. Press [OK]. Assigning a Ringtone to Each Contacts List Entry A specified ringtone or vibration setting can be associated to a pre-registered entry. Contacts Contacts List 1. Select the desired entry. 2. Press [Options] and select Edit. 3. Press [Options] and select Ringtone. 4. Select Switch On/Off. 5. Select On or Off. 6. Select Assign Ringtone. 7. Select Preset Sounds or My Sounds. 8. Select the desired ringtone. For details on selecting a ringtone, see Assigning Ringtone on page 85. 9. Select Vibration and select from On, Off or On & Link to Sound. For details on selecting a vibration, Vibration on page 85. 10.Press [OK]. 11.Press [Save]. Memory Status This function helps you to check the number of entries stored in the Contacts List. Contacts Contacts List [Options]
Advanced Memory Status Speed Dial List You can set a maximum of 9 phone numbers in the Speed Dial List (p. 82). Contacts List 33 Receiving a Contacts List Entry When the phone receives a Contacts List entry, a confirmation message appears in the stand-by mode screen. 1. Press [Yes]. The received entry is registered in the Contacts List. Press [No] to reject. Tip For details on making Infrared or Bluetooth wireless settings, see Connectivity on page 95. Setting Contacts List Entries in the Speed Dial List Contacts Contacts List 1. Select the desired entry. 2. Highlight the desired phone number. 3. Press [Options] and select Add to Speed Dial. 4. Select the desired list number. Tip The nine digit keys correspond to list numbers. To view the speed dial list, see page 82. Sending a Contacts List Entry Contacts Contacts List 1. Highlight the desired entry. 2. Press [Options] and select Send Contact. 3. Select Via Bluetooth or Via Infrared. The phone starts searching for Bluetooth wireless technology enabled devices within 10 metres or an infrared-enabled device within 20 centimetres. The connection will be established and the entry will be sent. 34 Contacts List
(M 5) Camera Your phone has an integrated digital camera. This allows you to take and send pictures or video clips wherever you are. Take Picture Put the phone into the digital camera mode to take a picture. Pictures are saved in Saved Pictures in JPEG format in the following three picture sizes.
(M 5-1) L: 480 640 dots M: 240 320 dots S: 120 160 dots Taking Pictures Camera Take Picture The preview is displayed through the screen. 1. Press or the Camera key to take the picture. The shutter sounds and the still image of the taken picture is displayed. Press [Cancel] to retake a picture. 2. Press [Save]. Saving (file name) to My Items is displayed, then the picture is registered. 3. Press F to return to stand-by. Remaining shots indicator 123:
Indicates the remaining number of pictures that can be taken. Tip Pressing the Camera key during stand-by also activates digital camera mode. If you wish to send a picture by multimedia message before step 2. Then after taking the picture, press select Multimedia or MMS Postcard. (MMS Postcard service may not be available on all networks. Contact your network operator for more information.) Large MMS messages may cause the size of attached pictures to be reduced. Using the Full Screen The preview can be displayed on the full screen without the soft key area. Camera Take Picture [Options] Full Viewfinder 1. Select On or Off. Camera 35 Taking a Self-Portrait To take a self-portrait, hold the phone with the mirror facing you whilst holding the phone at least 40 cm away. Press Using the Zoom Function Press c or d to change the zooming ratio. Zooming ratio indicators or the Camera key to take the picture.
: Magnification. Note When Picture Size is set to S, the zoom function has 3 magnifications (1, 2, 4). When Picture Size is set to M, the zoom function has 2 magnifications (1, 2). Selecting the Picture Size Camera Take Picture [Options]
Picture Size 1. Select the desired picture size. Selecting the Picture Quality Camera Take Picture [Options]
Picture Quality 1. Select Normal or Fine. Picture quality indicators
: Fine
: Normal Selecting the Anti-flicker Mode Camera Take Picture [Options] Anti-
flicker 1. Select Mode1 or Mode2. Note Vertical stripes may occur on the picture due to the light source. Change the mode to rectify. The digital camera uses a C-MOS sensor. Although this camera has been manufactured to the highest specifications, some pictures may still appear too bright or too dark. If the phone has been left in a hot place for a long time before taking or registering a picture, the picture quality may be poor. 36 Camera In the Case of No Available Memory When the number of pictures that can be taken becomes 3 or less, the remaining shots indicator in the upper left of the screen turns red. (The number of pictures that can be taken is approximate.) Even if the number of pictures that can be taken becomes 0, you can continue to take and save pictures until the message, Memory full. Please delete some data! appears. After which, you can save the picture. Adjusting the Brightness of the Picture According to Lighting Conditions Press a or b to adjust the brightness of the picture. Picture brightness (exposure level) indicators
: (Bright Normal Dark) Once the phone has returned to the stand-by screen, the brightness settings return to default. Viewing the Taken Pictures Camera Take Picture [Options] My Pictures The list of pictures is displayed. 1. Select the file you wish to view. The selected picture is displayed. Tip Your pictures are given file names which are pictureNNN.jpg (NNN is a consecutive number). The file name (without an extension), date and size of your pictures are displayed in the list. Using the Timer (Delay Timer) Camera Take Picture [Options] Delay Timer 1. Select On or Off. or phone returns to digital camera mode. is displayed on the screen and the Camera 37 Camera Take Picture [Options]
Continuous Shot 1. Select Auto Shot or Manual Shot. Select Off to cancel. or the Camera key to start Continuous 2. Press Shot. Four pictures are taken in a row. Auto Shot:
Manual Shot: Pictures are taken one by one by or the Camera key. pressing The taken pictures are saved automatically. To stop Continuous Shot, press [Cancel]. Note When Picture Size is set to L or M, you cannot use the Continuous Shot. When you select a frame for taking pictures, you cannot use the Continuous Shot function. Delay timer cannot be used with the Manual Shot. 2. Press or the Camera key to start the delay timer. 10 seconds after the timer sounds, the shutter sounds, and the camera takes a picture. Note The countdown sounds whilst the delay timer is operating. If or the Camera key is pressed whilst the delay timer is operating, the picture is taken instantly. The zoom function with c or d, or brightness adjustment of the picture with a or b, is unavailable whilst the delay timer is operating. If you wish to stop taking pictures with the timer, press [Cancel] whilst the delay timer is operating. Continuous Shot Four pictures are taken in succession. Auto Shot and Manual Shot are available. Continuous Shot indicators
When pictures are taken in Continuous Shot mode, these indicators appear on the screen.
* When delay timer and Continuous Shot is functions are simultaneously set, displayed instead. 38 Camera Selecting a Frame You can select the frame from preset patterns. You can also select a frame in Saved Pictures. Camera Take Picture [Options] Add Frame 1. Select Preset Frame or My Pictures. 2. Select the desired frame. The selected frame is confirmed on the display. 3. Press Note When Picture Size is set to Lor M, you cannot use the Frame function. When you activate the Continuous Shot, you cannot use the Frame function. Only the images of PNG format can be selected as the frame if you select My Pictures in step 1. Selecting the Shutter Sound You can select the shutter sound from 3 preset patterns. Camera Take Picture [Options]
Shutter Sound 1. Select the desired shutter sound.
(M 5-2) Record Video Put the phone into the video camera mode to record a video. Video clips are saved in .3gp format in the following two modes:
Record time indicators
: Message sending mode enabled
: Extended video mode enabled Recording Video Clips Sound can be recorded with the video clip. Camera Record Video The preview is displayed through the screen. 1. Press or the Camera key to start recording the video clip. The sound for recording the video clip occurs. If you press or the Camera key again, or when the recording is completed, the sound for ending the video clip recording occurs and the display transits to step 2. To play back the shutter sound, press [Play]. Camera 39 Note If For Message is selected, the size of the video clip that can be recorded depends on the message size set in MMS settings (p. 47). Save and Send is not displayed after recording in extended video mode. This option is not applicable to some service providers. Please contact your service provider for more information. Selecting Video Quality Camera Record Video [Options] Video Quality 1. Select Normal or Fine. Video quality indicators
: Fine
: Normal 2. Select Save. Saving (file name) to My Items is displayed, then the video clip is registered. To preview a video clip before saving, select Preview. To send a video clip by multimedia message after recording the video clip, select Save and Send. To record a voice clip again, press [Cancel]. Remaining sets indicator 123
: Indicates the remaining sets of video clips that can be recorded. Using the Zoom Function Press c or d to change the zooming ratio. Zooming ratio indicators
: Magnification. Selecting the Recording Size Mode You can select the recording size mode. Camera Record Video [Options]
Record Size 1. Select Extended Video or For Message. 40 Camera To stop playback, press [Back]. Tip Your video clips are given file names such as videoNNN.3gp (NNN is a consecutive number). The file name (without an extension), date and size of your video clips are displayed in the list. If the video clip has been recorded with sound, the volume can be adjusted by pressing a or b, or the side-up or side-down key. The volume varies depending on the Multimedia Volume settings (p. 87). The volume is 0 when Multimedia Volume is set to Silent. In the Case of No Available Memory When the number of video clips that can be recorded becomes 3 or less, the remaining sets indicator in the upper left of the screen turns red. (The number of sets that can be recorded is approximate.) Even if the number of video clips that can be recorded becomes 0, you can continue to record and save video clips until the message, Memory full. Please delete some data! appears. After which, you can save the video clip. Adjusting the Brightness of the Video Clips According to Light Conditions Press a or b to adjust the brightness of the video clip. Picture brightness (exposure level) indicators
: (Bright Normal Dark) Once the phone has returned to the stand-by screen, the brightness settings return to default. Viewing Recorded Video Clips Camera Record Video [Options] My Videos The list of video clips is displayed. 1. Select the file you wish to view. 2. Press
. The selected video clip is played back. To pause playback, press To resume playback, press again. Camera 41 Using the Timer (Delay Timer) To Record a Video Clip with the Timer Camera Record Video [Options] Delay Timer 1. Select On or Off. is displayed on the screen and the phone returns to video camera mode. 2. Press or the Camera key to start the delay timer. 10 seconds after the timer sounds, the camera starts recording the video clip. Note The countdown sounds whilst the delay timer is operating. If or the Camera key is pressed whilst the delay timer is operating, the video clip is recorded instantly. The zoom function with c or d, or brightness adjustment of the video with a or b, is unavailable whilst the delay timer is operating. If you wish to stop recording video clips with the timer, press [Cancel] whilst the delay timer is operating. Recording Video Clips with Sound Camera Record Video [Options] Voice Record 1. Select On or Off. 42 Camera
(M 4) Messages Your phone allows you to send and receive text or multimedia and to receive WAP alerts.
(M 4-2) Multimedia (MMS) About Multimedia Messaging Multimedia Messaging Service (MMS) allows you to send and receive multimedia messages with graphical images, photographs, sound, animations or video clips attached. Note Some MMS functions may not always be available depending on your network. Contact your network operator for more information.
(M 4-2-1) Creating a New MMS A Multimedia Create Message 1. Enter the message. To use the text template, move the cursor to the point you wish to insert the template. Press
[Options] and select Text Options. Select Text Template and then select the desired template. 2. Enter the phone number or e-mail address of the recipient. 3. Select Send. After the message is sent, the message is moved to the Sent box. Note The current message size displayed whilst you are creating the message is an approximation. If a message cannot be sent for some reason, the message stays in the Outbox and on the stand-by screen. is displayed Tip You can use the phone number or e-mail address from the Contacts List. (p. 31) To save the message without sending, select Save to Drafts instead in step 3 . To enter the subject, select Subject in step 3 and enter it. This is optional. Up to 40 characters as the subject (and up to 20 characters (for To and Cc)) can be entered. However, these may be limited depending on your network. In this case, you may not be able to send MMS. Contact your network operator for more information. Messages 43 Turning the Slide Show Setting On or Off A Multimedia Settings Slide Show 1. Select On or Off. If You Select On You can create messages which have up to 10 slides. Each slide can contain one picture, one sound file and up to 1000 characters of text (up to the message total 30 Kbytes or 100 Kbytes limit). If you wish to add a slide to a single slide, press
[Options] and select Add Slide. If you wish to perform slide operations for multiple slides, press [Options] and select Slide Control. The slide control options available are:
Add:
Remove: To remove the active slide. Previous: To navigate to the previous slide. Next:
To navigate to the next slide. To add a new slide. Video clip data cannot be attached as slide data to the message. To add more recipients, select Add Contact in step 3. Select To or Cc and select the desired number of the recipient. Then enter the phone number or e-mail address. To Send a Message Template MMS Your phone provides message templates with an image and voice attachment that help you create easily. A Multimedia Create Message
[Options] Message Template A confirmation screen asking whether you wish to discard the current text is displayed. 1. Confirm by selecting [Yes] or [No]. 2. Select the desired template. 3. Enter the message. 4. Enter the phone number or e-mail address of the recipient. 5. Select Send. Note Selecting Message Template deletes messages or images you have entered or attached. To prevent deletion, select Message Template first, then enter messages. 44 Messages If You Select Off You can attach a maximum of 20 pictures, sounds or video clips and up to 2000 characters of text (up to the message total 30 Kbytes or 100 Kbytes limit). Inserting Attached Data You can send pictures, sounds and video clips saved in the handset memory attached to multimedia messages. When attaching video clips, Slide Show must be set to Off. A Multimedia Create Message 1. Press [Options] and select from Picture, Sound or Video. 2. Select the desired file name. The selected picture/sound/video clip is attached. When attaching is complete, press [Back] to return to the message creation screen. To add more files, press [Options] and select from Add Picture, Add Sound or Add Video. Then select the desired file. To remove the attached files, press [Options] and select Remove. Reading MMS Messages you receive are stored in the Inbox. Incoming Messages The MMS indicator (
receiving an incoming message. A Multimedia Inbox 1. Select the message you wish to view.
) will appear when you are The message is displayed. 2. Scroll the screen to read the message. 3. Press Tip The volume varies depending on the Multimedia when finished. Volume settings (p. 87). The volume is 0 when Multimedia Volume is set to Silent. Messages 45 on selecting Delivery Report, see Setting Up MMS. Setting Up MMS A Multimedia Settings 1. Select the item you wish to set up. Roam. Download (Immediate, Deferred):
Controls MMS download timing when roaming outside of your network. Delivery Rep. Allow (On, Off):
Enables or disables Delivery Report when receiving a message which applies to the Delivery Report function. Anonymous Reject (On, Off):
Rejects a messages from an unknown or empty address name or not. Auto Delete (Off, Inbox, Sent, Both):
Deletes the oldest message automatically, when the Inbox, Sent or Both (Inbox and Sent) is full. Storing the Phone Number or E-mail Address of a Sender in the Contacts List A Multimedia Inbox 1. Highlight the message from which you want to store the phone number or e-mail address. 2. Press [Options] and select Save Sender. For details on entering a name, see Add New Contact on page 30. is in the Inbox, the following can be done. Retrieving MMS When A Multimedia Inbox 1. Highlight the alert you wish to download. 2. Press [Options] and select Download. Tip You can press downloading. instead of steps 1 and 2 to start Confirming Arrival of Delivery Report A Multimedia Sent 1. Highlight the message of which you wish to confirm arrival of delivery report. 2. Press [Options] and select Delivery Report. This menu is available only for sent messages that have the Delivery Report set to On. For details 46 Messages Slide Show (On, Off):
Enables or disables Slide Show when sending a message. Message Size (30KB, 100KB):
Sets the maximum message size that can be sent. Advanced Priority:
Prioritises composed messages. Delivery Report:
Enables Delivery Report. Expiry Time:
Sets Expiry Time for a message to be stored in the Server. Sender Visibility:
Displays the information about the sender. Slide Interval:
Sets the slide display time when sending a message. 2. Change each item. Sending a Picture File with MMS Postcard Your phone allows you to send multimedia messages to a Vodafone specific postcard service centre that prints the picture and mail it to the recipients home address specified in the MMS message. (Your phone is initially provided with the address of a Vodafone specific Postcard service centre, and its address cannot be changed.) MMS Postcard service may not be available on all networks. Contact your network operator for more information. To Create a New MMS Postcard (M 4-2-2) A Multimedia MMS Postcard 1. Select a picture you wish to use for a postcard. 2. Enter your message. 3. Enter the following information for the recipient. See the note below for details. Name Additional Info House No. / Street Postcode County / City Country 4. Press [Options] and select Send. Messages 47
(M 4-3) Text (SMS) About Text Messaging The Short Message Service (SMS) allows you to send text messages of up to 1024 characters to other GSM users. To Use SMS with Your Phone Messages longer than 160 characters may be composed. During sending, the messages are split. If the receiver has a suitable phone the messages recombines during reception, if not your message appears as a number of separate 152 characters messages. You can send or receive SMS even if you are talking on the phone. You can also use Text Templates to help you compose SMS. Note The items Name, House No. / Street and Postcode are necessary to complete sending MMS postcards. Information for a recipient Name (mandatory):
Name of the recipient for a postcard up to 50 characters Additional Info (optional):
Additional information of the recipient up to 50 characters House No. / Street (mandatory):
Street and number up to 50 characters Postcode (mandatory):
Postal code up to 60 characters County / City (optional):
State, province, and region up to 50 characters Country (optional):
Country up to 20 characters The item Country may not be displayed, so you cannot send MMS Postcards overseas from your phone. Files in Animation GIF format cannot be used for the MMS Postcard service. The picture quality of MMS Postcard varies depending on the picture size. 48 Messages Creating and Sending a New SMS A Text Create Message 1. Enter your message.
(M 4-3-1) To use the text template, move the cursor to the point you wish to insert the template. Press
[Options] and select Text Template and then select the desired template. 2. Enter the phone number of the recipient. 3. Select Send. The phone begins the sending process and the SMS is sent. After the message has been sent, the message is added to the Sent box. To save the message in the Drafts box without sending it, select Save to Drafts. Note When you send a message of more than 160 characters, the confirmation message is displayed. Tip You can use the phone number from the Contacts List. (p. 31) To add more recipients, select Add Contact in step 3. Select an item number for adding the recipients phone number. Then enter the phone number. Reading SMS Incoming Messages The SMS indicator (
message arrives. 1. When you receive a SMS, press by.
) will appear when an incoming during stand-
2. Select the message you wish to view. The senders phone number and a part of the message are displayed. When the senders phone number is stored in the Contacts List, the senders name is displayed instead of the phone number. Massages that are marked with massages. If the Inbox, Sent box or Drafts box is full, massages. is displayed. Delete unnecessary denote unread 3. Scroll the screen to read the message. 4. Press F when finished. Messages 49 Message Lifetime This indicates the number of days and hours for which a message you send may remain undelivered to the message recipient. During this period, the message service centre will continually try to deliver the message to the recipient. A Text Settings Message Lifetime 1. Select the validity period. Message Format A Text Settings Message Format 1. Select the message format. Connection Type A Text Settings Connection Type 1. Select the connection type. Extracting Phone Numbers from the Received Messages and Making a Call You can make a call using the phone number embedded in the received SMS message. A Text Inbox 1. Select the message from which you wish to extract phone numbers. 2. Press [Options] and select Extract Numbers. Telephone numbers embedded in the message are displayed. 3. Highlight the phone number. 4. Press [Options] and select Make Call. To save this phone number in the Contacts List, select Save Number.
(M 4-3-5) Setting Up SMS To Set Up the Service Centre Address A Text Settings Message Centre 1. Enter the centre phone number. If you wish to enter a country code for a message to an international number, press and hold P until a
+ sign is displayed. 50 Messages Optimisation When set On (default), double-byte characters such as European characters with an accent are converted into single-byte characters and sent. When Off, double-byte characters are sent as displayed. Please note that you may be charged double for double-
byte characters sent in an SMS when Optimisation is set Off. A Text Settings Optimisation 1. Select On or Off. Cell Broadcasts You can receive Cell Broadcast messages or general messages such as weather forecasts and traffic reports. This information is broadcast to subscribers in certain network areas. This function may not be available on all mobile phone networks. Contact your network operator for more information. Enabling/Disabling Cell Broadcasts A Cell Broadcasts Switch On/Off 1. Select On or Off.
(M 4-7)
(M 4-7-1) Reading Cell Broadcast Messages 1. When you receive a Cell Broadcast message, press
(M 4-7-2)
. 2. Press a or b to scroll the screen to read the message.
(M 4-7-3) 3. Press F when finished. Setting Languages You can select your preferred language for the cell broadcast message display. F Cell Broadcasts Settings Language The language list is displayed. 1. Press a or b to highlight the language you wish to set, then press
. 2. Press F when finished. Messages 51 Subscribing to Cell Broadcasts Select the page of the cell broadcast message that you want. F Cell Broadcasts Settings Set Info Subjects Add/Remove 1. Select the desired page. 2. Press F. Tip If the desired page is not in the list that appears in step 1, select Create Subject before step 1, then enter the subject code to add a page. For details on the subject code, contact your service provider. 52 Messages Vodafone live!
Your phone is already configured to access Vodafone live! and the mobile internet*.
(M 2) Your phone is already setup to Vodafone site for WAP/
MMS Settings. Starting the WAP Browser 1. Press C during stand-by. To Exit the WAP Browser 1. Press F to exit the browser. Vodafone live! is a new mobile internet portal which is your gateway to a new world of information, games, music and services. Because your phone uses GPRS, a system that is much faster than previous ways of getting mobile information. Also, the connection is always on which means there is no need to wait for dialling up. You only have to pay for the data you send or receive, not how long youre connected.
* If you have problems getting connected, please phone Vodafone Customer Support. Your phone contains a WAP browser used for surfing on the Mobile Internet, where you can get a lot of useful information. Normally, pages are designed for a mobile phone. Vodafone live!
53 Navigating a WAP Page a b c d:
A:
C:
Move the highlights around in the screen. Executes the option displayed in the lower centre of the screen. Launches browser option menu. Selects an action displayed in the lower right corner of the screen. Used to access Vodafone live! by opening the browser. Q (press and hold):
Starts the Go to URL. G to O (press and hold):
F:
Starts the Bookmark (WAP). Exits the browser (short press). Turns off the phone. (press and hold) 54 Vodafone live!
Browser Menu When you are browsing, you can reach browsing options by pressing [Options]. Select:
Selects the link you wish to see. (Select is displayed only when the link is highlighted.) Home:
Goes to the homepage you set in the WAP Settings. Add bookmark:
Adds the site you are currently browsing to your list of bookmarks. View bookmarks:
Displays a list of bookmarks. Save items:
Saves pictures, sounds or video clips in the appropriate My Items folder. Go to URL:
Inputs the URL of the site you wish to go to. History:
Displays a history list. Forward:
Moves to the next URL in the history list. Bookmarks When you are browsing, press [Options] and select the appropriate option. To Add a Bookmark 1. Select Add bookmark. To Access Bookmarked Pages 1. Select View bookmarks. 2. Select the desired bookmark. To Edit Bookmarks 1. Select View bookmarks. 2. Select More. 3. Highlight a bookmark page you wish to edit. 4. Press [Options] and select Details. 5. Edit the title, then press b. 6. Edit the URL, then press b. 7. Select Save. Reload page:
Refreshes the contents of the WAP page. Advanced...:
Show URL:
Displays the URL of the site you are currently browsing. Save page:
Saves the page you are currently browsing to your list of Snap Shots. Snapshots:
Displays a list of Snap Shots. Alert inbox:
Displays a list of WAP push messages. You can receive push messages via WAP Services. This means that a service provider sends WAP content to your phone, without any set up. Settings:
Includes Downloads, etc. Security:
Sets the security. Clear...:
Clears history, cache, etc. Restart Browser:
Restarts the browser. Vodafone live!
55 To Delete Bookmarks 1. Select View bookmarks. 2. Select More. 3. Highlight a bookmark page you wish to delete. 4. Press [Options] and select Delete. 5. Press [Options] and select OK. Setting the Hotkeys to Web Page Bookmarks You can access Web pages quickly by pressing the shortcut keys (hotkeys). Follow the following to assign shortcuts. 1. Select View bookmarks. 2. Select More. 3. Highlight a bookmark page you wish to edit. 4. Press [Options] and select Hotkeys. The list of hotkeys is displayed. 5. Select the number to which you wish to assign hotkeys. The list of registered bookmarks is displayed. 6. Select the desired bookmark. 56 Vodafone live!
(M 6) My Items My Items contains several types of picture, sound and video clip data. Also included in My Items are frequently used text message phrases and accessed WAP pages (addresses) which you can use. You can also transmit picture, sound and video clip data via infrared or Bluetooth wireless technology to OBEX-
enabled phones. Pictures Pictures that are taken by a digital camera or images that are downloaded from mobile Internet sites can be managed.
(M 6-1) PNG format JPEG format
: GIF format
: BMP format
: WBMP format
: WPNG format Note The phone can store approximately 1.8 Mbytes of data across Pictures, Games & More, Sounds and Videos. Viewing Pictures My Items Pictures Saved Pictures 1. Select the file you wish to view. The selected picture is displayed. Using Images as Wallpaper My Items Pictures Saved Pictures The list of pictures is displayed. 1. Highlight the file you wish to use as wallpaper. 2. Press [Options] and select Set as Wallpaper. 3. Specify the area you wish to display using the navigation keys. My Items 57 Saving to Contacts List You can use this option only for pictures saved in the handset memory. My Items Pictures Saved Pictures 1. Highlight the file you wish to add to Contacts List. 2. Press [Options] and select Add to Contact. To overwrite, select Existing Contact and select the data you wish to save to. If the picture size exceeds 120 dots in width or 160 dots in height, specify the area you wish to display. To save as a new entry, select New Contact. For details on entering a name, see Add New Contact on page 30. Editing Pictures My Items Pictures Saved Pictures 1. Highlight the file you wish to edit. 2. Press [Options] and select Edit. 3. Select the desired option:
Rotate:
The picture is rotated 90 anticlockwise. Press [Rotate] again for another 90. Adjust Size: Select the desired option. Retouch:
Add Frame: Select the desired frame pattern. Select the retouching option. 58 My Items Add Stamps: Press [Stamps] and select the desired stamp pattern. Repeat this step to add more patterns. Note The size of pictures that you can rotate or add a frame to is 120 dots [W] 160 dots [H] or 160 dots
[W] 120 dots [H] maximum. The size of pictures that you can retouch is 26 dots
[W] 26 dots [H] minimum and 120 dots [W] 160 dots [H] or 160 dots [W] 120 dots [H] maximum. The size of pictures that you can add stamps to is 12 dots [W] 12 dots [H] minimum and 120 dots [W]
160 dots [H] or 160 dots [W] 120 dots [H]
maximum. Adjust Size may not be available depending on the original picture and copyright issued. Sending a Picture File My Items Pictures Saved Pictures 1. Highlight the file you wish to send. 2. Press [Options] and select Send. 3. Select As Multimedia or As Postcard. For details on creating a message, see Creating a New MMS on page 43. Note Pictures with a faint icon cannot be sent attached to a message. MMS Postcard service may not be available on all networks. Contact your network operator for more information. Tip For details on transmitting My Items data, see Sending My Items Data to OBEX-enabled Phones on page 63. Uploading Picture Files You can upload your pictures to the Media Album. This option may not be available on all networks. Contact your network operator for more information. My Items Pictures Saved Pictures 1. Highlight the file you wish to upload. 2. Press [Options] and select Send. 3. Select To Album. 4. Press [Yes]. Downloading Picture Files My Items Pictures More Pictures The picture file download site is displayed.
(M 6-1-3)
(M 6-2) Games & More Along with the preloaded application, downloaded applications are stored in Applications. Note Applications can store up to 50 applications. Using Applications Various kinds of Vodafone specific applications can be used in this phone. To use applications, download the applications via the mobile Internet. Some applications offer the ability to connect to a network either within a game or network based application. Note Applications may be both localised (no connectivity) and network based (using the mobile Internet to update information/play games). The network may charge you more for using network-based applications. Please contact your service provider for more information. My Items 59 Downloading Applications Confirmation Screen Before downloading the application you are asked to confirm what you are about to receive. After checking the information on the confirmation screen, the application can be downloaded. Note User authentication may be required before downloading the application on some information screens.
(M 6-2-1) Executing Applications My Items Games & More Applications Downloaded applications are sequentially displayed from the latest one. 1. Select the title of the application you wish to execute. The selected application is executed. When using network connection type applications, connection to the network can be selected. 2. To end the application, press F and select [End].
(M 6-2-2) More Games My Items Games & More More Games 1. Select the application you wish to download. After a WAP browser is displayed variously, the confirmation screen will appear after a whilst.
(M 6-3) 2. Press [Get] to start downloading. 3. Press [OK] when finished. Sounds The ringtones created using the Melody Editor and the AMR data recorded by Voice Recorder are managed in Saved Sounds. The default ringtones are not contained within Saved Sounds.
: SMAF format
: Original ringtone (composed in Melody Editor)
: Standard MIDI format
i Melody format
: WAVE format
: AMR format Tip SMAF (Synthetic music Mobile Application Format) is a format of music data for mobile phones. 60 My Items Playing Back Sound Files My Items Sounds Saved Sounds 1. Select the file you wish to play back. To stop playback, press
. Note This option may not be available in all regions. Using the Sound Files as Ringtone My Items Sounds Saved Sounds 1. Highlight the file you wish to use as ringtone. 2. Press [Options] and select Set as Ringtone. The selected sound is automatically used for the ringtone of the current Profiles. Note Files in AMR or WAVE format cannot be used for the ringtone. The volume varies depending on the Multimedia Volume settings (p. 87). The volume is 0 when Multimedia Volume is set to Silent. Sending a Sound File with MMS My Items Sounds Saved Sounds 1. Highlight the file you wish to send. 2. Press [Options] and select Send. 3. Select As Multimedia. If you select your original ringtone in step 1, perform the following. 4. Select the file format SMAF, MIDI or i Melody. For details on creating a message, see Creating a New MMS on page 43. Note Sounds with a faint icon cannot be sent attached to a message. Only the first part of the data is converted if you select i Melody in step 4. Uploading Sound Files You can upload your sounds to the Media Album. This option may not be available on all networks. Contact your network operator for more information. My Items Sounds Saved Sounds 1. Highlight the file you wish to upload. 2. Press [Options] and select Send. 3. Select To Album. If you select your original ringtone in step 1, perform the following. My Items 61 4. Select the file format SMAF, MIDI or i Melody.
(M 6-3-4) Downloading Sound Files My Items Sounds More Sounds The sound file download site is displayed. Videos Video clips that are recorded by a video camera or video clips that are downloaded from mobile Internet sites can be managed. Tip The volume varies depending on the Multimedia
(M 6-4) Volume settings (p. 87). The volume is 0 when Multimedia Volume is set to Silent. Playing Back Video Clip Files My Items Videos Saved Videos 1. Select the file you wish to play back. 2. Press
. To resume, press To stop playback, press [Back]. again. Sending a Video Clip File with MMS My Items Videos Saved Videos 1. Highlight the file you wish to send. 62 My Items 2. Press [Options] and select Send. 3. Select As Multimedia. For details on creating a message, see Creating a New MMS on page 43. Note Video clips with a faint icon cannot be sent attached to a message. Uploading Video Clip Files You can upload your video clips to the Media Album. This option may not be available on all networks. Contact your network operator for more information. My Items Videos Saved Videos 1. Highlight the file you wish to upload. 2. Press [Options] and select Send. 3. Select To Album. 4. Press [Yes].
(M 6-4-3) Downloading Video Clip Files My Items Videos More Videos The video clip file download site is displayed. Sending My Items Data to OBEX-enabled Phones Choose the appropriate menu. My Items Pictures Saved Pictures My Items Sounds Saved Sounds My Items Videos Saved Videos 1. Highlight the desired file. 2. Press [Options] and select Send. 3. Select Via Bluetooth or Via Infrared. The phone starts searching for Bluetooth wireless technology enabled devices within 10 metres, or an infrared-enabled device within 20 centimetres. When an infrared-enabled device is detected, the infrared connection is established and the entry is sent. When Bluetooth wireless technology enabled devices are detected, a list of enabled devices is displayed. 4. Select the desired Bluetooth wireless technology enabled device. The connection is established and the entry is sent. Receiving the My Items Data When the phone receives the My Items data, a confirmation message appears in the stand-by mode screen. 1. Press [Yes]. The received entry is registered in the corresponding My Items folder. Tip For details on Infrared or Bluetooth wireless
(M 6-5) settings, see Connectivity on page 95. Text Templates You can register up to 20 text templates for use in text messages and multimedia messages. 120 characters may be registered in any text template. Adding Phrases to Text Templates My Items Text Templates 1. Select the number you wish to register. 2. Enter the text and press
. Note You can send a maximum of 100 Kbyte data. My Items 63
. Editing Text Templates My Items Text Templates 1. Highlight the number you wish to edit. 2. Press [Options] and select Edit. 3. Enter new text and press Viewing Text Templates My Items Text Templates The list of Text Templates is displayed. 1. Highlight the number you wish to view. 2. Press [Options] and select View. Deleting Text Templates My Items Text Templates 1. Highlight the text template you wish to delete. 2. Press [Options] and select Delete. Memory Status This function helps you to check the memory status of My Item. Memory status covers Applications, Pictures, Sounds, and Videos. My Items Memory Status
(M 6-7) 64 My Items
(M 1) Games & More
(M 1-1) Applications The list of Java applications is displayed. Downloaded applications are displayed in order starting from the latest one. Executing Applications For details on executing applications, see Executing Applications on page 60. Setting Permission When using applications that access the network, you may need online security against data theft or tampering especially for monetary transactions. With this option, you can set the confirmation method when the Java application accesses the network. To Select the Function and Confirmation Method Games & More Applications 1. Highlight the desired Java application. 2. Press [Options] and select Permission. 3. Select Net Access to access billing data on the network. 4. Select the desired confirmation method. Always Connect: Allows the Java application access First Time:
Per Session:
Per Access:
without confirmation. Informs you when the Java application uses the function for the first time. If allow is selected, no more confirmations are made until you delete the application. Informs you when the Java application uses the function for the first time. If allow is selected, no more confirmations are made until the application finishes operation. Informs you every time the Java application uses the function regardless of whether or not you select allow or deny. Never Connect: Prevents the Java application from using the functions and no confirmation is made. Games & More 65
(M 1-2-3) Set Network Access You can set how and whether to connect to the network or not using the screensaver application. Games & More Screensavers Set Network Access 1. Select from Always Connect, Default Settings or Never Connect. Note Changes made to the above setting whilst the application is suspended are made effective by restarting the application. You may not be able to make the above settings depending on your network. To Reset Permissions You can reset all permissions you made Games & More Applications 1. Highlight the desired Java applications. 2. Press [Options] and select Reset Permissions. Screensavers You can download screensaver applications for the stand-by screen. Games & More Screensavers Switch On/Off 1. Select On or Off. Note If you select On and a screensaver application is
(M 1-2) not set, a list displaying available screensavers appears, asking you to make a selection.
(M 1-2-2) Setting the Screensaver Games & More Screensavers Set Application The downloaded screensaver applications are displayed. 1. Select the desired screensaver application. 66 Games & More
(M 1-2-4) Resume Time You can set the time period for the screensaver application to activate. Games & More Screensavers Resume Time 1. Enter the resume time in two digits using the digit key.
(M 1-3) More Games You can download applications. Games & More More Games The application download site is displayed. 1. Select the application you wish to download. After a WAP browser is displayed variously, the confirmation screen will appear after a whilst. 2. Press [Get] to start downloading. 3. Press [OK] when finished.
(M 1-4-1)
(M 1-4) Settings Calls & Alarms You can set the priority of incoming calls and alarms whilst an application is operating. Games & More Settings Calls & Alarms 1. Select Incoming Call or Alarm. 2. Select methods. Call Priority or Alarm Priority:
The application is suspended automatically, and you can receive a call, or the alarm will sound. After finishing the call or the alarm ends, the suspend icon
) is displayed letting know there is a suspended application. Call Notice or Alarm Notice:
The marquee (character scrolls) is displayed on the first line of the screen whilst the application continues. If you press D, the application is suspended, and you can receive a call. After finishing the call, the suspend icon (
know there is a suspended application.
) is displayed letting Games & More 67 To Set the Blinking Operation This setting enables the backlight to be controlled by the application. If set to Off, the backlight cannot be turned on from the application. Games & More Settings Backlight Blink 1. Select On or Off. Vibration When the vibrator is set in the application, you can choose whether the operation is enabled or disabled. When a SMAF file is specified in the application, you can operate the vibrator set in the SMAF file. Note SMAF (Synthetic music Mobile Application Format)
(M 1-4-4) is a music data format for mobile phones. Games & More Settings Vibration 1. Select from On, Off or On & Link to Sound. When you set On & Link to Sound, the sound of SMAF file in the application is synchronised with the vibrator.
(M 1-4-2) Sound Volume You can set the volume of the application such as sound effect to one of the five levels or silent. When Multimedia Volume (p. 87) is set to Silent, this setup has priority. Games & More Settings Sound Volume The current volume level is displayed. 1. Press a to increase the volume or press b to decrease the volume.
(M 1-4-3) Backlight Games & More Settings Backlight Switch On/Off 1. Select from Always On, Always Off or Normal Settings. Always On:
Lit whilst the application is operated. Unlit whilst the application is operated even if a key is pressed. Normal Settings: Works with the main backlight Always Off:
setting. (p. 89) 68 Games & More
(M 1-4-5) Reset To Reset All Items in Settings Menu Games & More Settings Set to Default 1. Enter your handset code. The default handset code is 0000. For details on changing the handset code, see To Change Handset Code on page 101. Java Information The information about the license belonging to Java can be displayed.
(M 1-5) Games & More 69 To Change the Vibration of Alarm Tone 7. Select Vibration. 8. Select On, Off or On & Link to Sound. To Change the Duration of Alarm Tone 9. Select Duration. 10.Enter the desired time (02-59). 11.Press [Back]. To Set the Repeating Option 12.Select Repeat Daily. 13.Select On. 14.Press [Save].
(M 3)
(M 3-1) Applications SIM Application You can refer to the information on the SIM. Contact your service provider for further details.
(M 3-2) Alarms Setting the Alarms The alarm function allows you to be alerted at a specified time. Note that the alarm may not function correctly if the clock has not been set. Applications Alarms 1. Select the blank setting. 2. Enter the desired time. To Change the Type of Alarm Tone 3. Select Set Alarm Tone. 4. Select Tone. 5. Select Preset Sounds or My Sounds. 6. Select the desired tone. For details on selecting a ringtone, see Assigning Ringtone on page 85. 70 Applications Editing the Alarm Setting Applications Alarms 1. Select the desired setting and edit it. Resetting an Alarm Setting Applications Alarms 1. Select the alarm you wish to reset. 2. Select Reset Alarm. Resetting All Alarm Settings Applications Alarms 1. Select Clear All.
(M 3-3) Calculator The calculator function performs the 4 arithmetic calculations using up to 12 digits. Applications Calculator Calculator The calculator is displayed on the display. Key operations for calculation are as follows. To enter a decimal point, press R. To clear the entered number or operand, press
[Clear]. To do the calculations, press To start a new calculation, press [Clear]. Applications 71
(M 3-4) Voice Recorder This allows you to record a voice clip of up to 60 seconds, which can be used to remind you of schedule entries or be sent within a multimedia message. The recorded voice clip is registered in Saved Sounds. Voice clips are saved in .amr format. Recording a Voice Clip Applications Voice Recorder 1. Press to start recording. To stop recording before the recording time is over, press
. 2. Select Save to save the voice clip. To play back the recorded voice clip, select Playback. To record a voice clip again, press [Cancel] . Note To change recorded size before recording, press
[Options] and select Record Size. Then select Extended Voice or For Message.
(M 3-3-2) Rate Conversion You can also use the calculator as a currency calculator to convert from/to a home currency using a conversion rate that you enter. To Set a Currency Conversion Rate Applications Calculator Exchange Rate 1. Select Foreign -> Domestic or Domestic ->
Foreign. 2. Enter the currency conversion rate. To delete all digits, press [Clear]. To Convert a Value Applications Calculator Calculator 1. Enter the value to be converted. 2. Press [Options] and select In Domestic or In Foreign. The result is displayed. If you select Exchange Rate in step 2, you can set a currency conversion rate. Note You cannot perform step 1 when an arithmetic symbol (+, , or ) is displayed. 72 Applications Tip The volume varies depending on the Multimedia Volume settings (p. 87). To adjust the volume, press a or b, or the side-up or side-down key. The volume is 0 when Multimedia Volume is set to Silent. You can also activate Voice Recorder by pressing
, then R during stand-by. to start recording. to stop recording. Sending Voice Clips Applications Voice Recorder 1. Press 2. Press 3. Select Save and Send. For details on creating a message, see Creating a New MMS on page 43. Note Save and Send is not displayed after recording in extended voice mode.
(M 3-5) Melody Editor You can create an original ringtone, or you can send a melody attached to a multimedia message. You can input up to 95 tones 32 voices, 190 tones 16 voices, or 380 tones 8 voices per melody. The original ringtone is registered in Saved Sounds. Creating Your Original Ringtone Applications Melody Editor Create New 1. Enter the title.
(M 3-5-1) Up to 24 characters can be entered. 2. Select a tempo. The music tempo is described below. Allegro (Fast):
Moderato (Normal):
Andante (Slow):
Adagio (Very Slow):
3. Select from 8 Chords, 16 Chords or 32 150 125 107 94 Chords. Applications 73 To specify the types of notes or rests, see page 75. 8. When you finish inputting, press [Options] and select Save. 9. Select Save to My Items. Note If the capacity or memory in Saved Sounds becomes insufficient, the message, Maximum capacity : 200 Not registered. or Not registered. Memory full. is displayed. The screen returns to step 9. Try again after deleting unnecessary data. Melodies consisting of too many short notes
(semiquavers and triplets) cannot be played back in step 8 and the following message is displayed: Can not play due to too many notes per sec. The screen returns to step 5. The message Can not save due to too many notes per sec. may also be displayed, and the screen returns to step 5. Reduce the number of melodies, replace short notes, cancel triplets, etc. to remedy. 4. Press the digit keys to specify the musical scale and rest. For details on specifying the sound level and rest, see To Specify the Musical Scale and Rest on page 75. 5. Press P or R to specify the types of musical notes or rest. For details on specifying the musical notes and rest, To Specify the Types of Notes and Rests on page 75. 6. Press d after inputting one note. Input the next note after the cursor moves to the right. 7. Repeat steps 5 and 7 to input notes. When entering notes, you can do the following:
Press Press [Options] and select:
to play back all input notes. Play before cursor to play back notes up to the cursor position. Select Part to select another chord. Set Tone to set or change the tone using different instruments. (p. 76) Set Strength sets the strength of the original ringtone. (p. 76) 74 Applications To Specify the Musical Scale and Rest Using the keys shown below, specify the musical scale and rest. To Specify the Types of Notes and Rests Press P or R repeatedly. P P P P Ti Fa La Sol Re Mi Do Rest G H I J K L M Q When you press the key shown above once, a crotchet is specified in the middle scale (no mark). When you press the same key repeatedly, the note will shift cycle through the available octave ranges. LL L L When you press a or b whilst a note is selected, the note will move one semitone higher or lower. When entering rest, crotchet rest is entered.
( ) P When you make a dotted note or a triplet, press O after selecting the target note. Note You cannot make a dotted semiquaver (semiquaver rest) or a dotted semibreve (semibreve rest). Three continuous notes are required for a triplet. To specify a tie, press N after selecting the target notes. An underscore (_) is displayed next to the note, and the note is tied with the next one. To enter the next note, press d to move the cursor to the right. Then, repeat the operation on the previous pages. Applications 75 To Set the Strength of the Original Ringtone The strength of the original ringtone can be set in 3 levels for each melody. When you purchase this phone, the strength of the original ringtone is set to Loud. 1. Press [Options] and select Set Strength in step 8 on page 74. 2. Select a strength of the tone. 3. Press
. Now you can create an original ringtone.
(M 3-5-2) Editing Original Ringtones Applications Melody Editor My Sounds 1. Highlight an original ringtone you wish to edit. 2. Press [Options] and select Edit Melody. 3. Edit the title. 4. Select a tempo and number of voices. If the cursor is positioned next to a note, you can repeat the note immediately left of the cursor when a or b is pressed. To Set the Tone The phone can play notes using different instruments. You can select from 128 basic tones (8 types of: Pianos, Chimes, Organs, Guitars, Basses, Strings 1, Strings 2, Brasses, Reeds, Flutes/Pipes, Synth Leads, Synth Pads, Synth Effects, Ethnics, Percussions, and Effects) and 61 extended tones (40 types of Drums FM and 21 types of Drums WT). 1. Press [Options] and select Set Tone in step 8 on page 74. 2. Press c or d to highlight a category of the tone. 3. Press a or b to highlight a tone. 4. Press
. Now you can create a melody. Tip You can play back the melody in the selected tone by pressing [Options] and select Play Current Part, or play back the syllable names in the selected tone by selecting Confirm Tones instead. 76 Applications 3. Move the cursor to the last note to highlight the area. 4. Press [Options] and select Paste. 5. Move the cursor to the point you wish to paste the notes.
(M 3-6) Phone Help You can view the help list and use it to guide you in the phones functions. Applications Phone Help 1. Highlight the desired function. 5. Edit the data. 6. When you finish editing, press [Options] and select Save. 7. Select Save to My Items. 8. Select Overwrite or New. Note When the number of voices is modified in step 5, the confirmation message may be displayed. When you press [Yes], a section of the melody may be deleted. Tip You can delete the melody after or before the cursor by pressing [Options] and selecting Del. after cursor or Del. before cursor. Copying and Pasting Notes You can copy and move a part of the melody to another position. Only original ringtones or editable melodies can be copied or moved. 1. In the Score input screen, press [Options] and select Copy or Cut. 2. Move the cursor to the first note to be copied or to be cut. Applications 77 To Set an All Day Event 1. Enter the subject, date and location. 2. Press [Save]. To Set an Anniversary 1. Select the anniversary option from Ann by date or Ann by day. 2. (For Ann by date) Enter the subject, date (month and day) and location.
(For Ann by day) Enter the subject, date (day of the week, week number and month) and location.
(M 7) Calendar Calendar allows you to easily schedule appointments or events, which are associated with the date and time. These entries can also be sent via infrared or Bluetooth wireless technology to a PC to share the same schedules. Creating a New Entry Calendar 1. Highlight the desired day to which you want to add an event. 2. Press [Options] and select New Entry. 3. Select from Appointment, All Day Event or Anniversary. To Set an Appointment 1. Enter the subject, start time and end time. 2. Select the reminder option. 3. Select and set Tone, Vibration or Duration. 4. Enter the location. 5. Press [Save]. 78 Calendar Sending a Schedule Entry Calendar 1. Select the day including schedule entries you wish to send. 2. Select Via Bluetooth or Via Infrared. The phone starts searching for Bluetooth wireless technology enabled devices within 10 metres, or an infrared-enabled device within 20 centimetres. When an infrared-enabled device is detected, the infrared connection is established and the entry is sent. When Bluetooth wireless technology enabled devices are detected, a list of enabled devices is displayed. 3. Select the desired Bluetooth wireless technology enabled device. The connection is established and the entry is sent. Tip You do not need to enter your passcode in step 3. For details on Infrared or Bluetooth wireless settings, see Connectivity on page 95. Viewing an Entry Calendar 1. Select the day you wish to view. The day view is displayed. To Search By Date 1. In the monthly or daily view, press [Options]. 2. Select Go to. 3. Select Today to display today or Enter date to enter the desired date. To Search By Subject 1. In the monthly or daily view, press [Options]. 2. Select Find. 3. Enter the desired text. To Change the Week Format 1. In the monthly view, press [Options]. 2. Select Week Format. 3. Select Monday-Sunday or Sunday-Saturday. Calendar 79 Deleting Entries 1. In the monthly or daily view, press [Options]. 2. Select Delete. 3. Select the desired option. This Appointment:(daily view only) All this Day:
Deletes the selected appointment. Deletes all entries for the selected day. All this Month: Deletes all entries for the selected Up to Last Month:
month. Deletes all entries from the last month to the selected month. All Schedules: Deletes all entries in this application. 80 Calendar
(M 8)
(M 8-3) Contacts Call Log The phone will record the last 10 missed calls, received calls and dialled numbers. Viewing Call Log Contacts Call Log 1. Select from All Calls, Dialled Numbers, Missed Calls, or Received Calls. The selected call log list is displayed. 2. Select the phone number you wish to view. If you wish to dial the number, press D. Call log 1 is the most recent. When you press b, call log 2 is displayed. Tip You can also confirm call logs by pressing D during stand-by mode. Sending Messages 1. In call log list, highlight the call log you wish to send a message to. The selected call log is displayed in detail. 2. Press [Options] and select Create Message. 3. Select Multimedia or Text. For details on creating a message, see Creating a New MMS on page 43 or Creating and Sending a New SMS on page 49. Deleting a Call Log 1. In call log list, press [Options] and select Delete. Contacts 81
(M 8-6) Call Timers This function lets you check the duration of your calls. Checking the Duration of the Last Call and All Calls Contacts Call Timers 1. Select Received Calls or Dialled Numbers. The duration of the last call or all calls is displayed.
(M 8-7) Data Counter You can confirm the amount of bytes that you used in the GPRS transmission. Contacts Data Counter 1. Select from Last Data or All Data. Resetting All Data Counter Contacts Data Counter Clear Counter
(M 8-4) Speed Dial List You can view and perform other operations for phone numbers registered in the Speed Dial List. Contacts Speed Dial List The names and phone numbers stored in the Speed Dial List are displayed in order.
(M 8-5) My Numbers You can check your own voice, data and fax phone numbers. Contacts My Numbers 1. Select the phone number you wish to check from Voice, Data or Fax. Note Data or Fax may not be displayed depending on the SIM card. 82 Contacts Setting the Charge Limit This function is useful if you wish to make sure you do not exceed a certain charge limit. Contacts Call Costs Max Cost Set Limit 1. Enter your PIN2 code. 2. Enter a value. To enter a decimal point, press R. Resetting All Call Costs Contacts Call Costs Clear Costs 1. Enter your PIN2 code.
(M 8-8) Call Costs This function lets you check the charges for your calls. Some networks do not support Charging Advice. Please check with your service provider for availability. Checking the Cost of the Last Call Contacts Call Costs Last Call The cost of the last call is displayed. Checking the Total Call Cost Contacts Call Costs All Calls The cost of all calls is displayed. Setting the Charge Rate Set the charge rate to calculate the call cost and set the maximum limit for call cost. Contacts Call Costs Costs Units Set Units 1. Enter your PIN2 code. 2. Enter a cost per unit. To enter a decimal point, press R. 3. Enter a currency unit (up to 3 characters). Contacts 83 3. Select the setting you wish to customise and change as desired. For details about settings, pages 84 to 88. 4. Press [Save] when finished. Resetting Profile Settings Settings Profiles 1. Highlight the profile you wish to reset. 2. Press [Options] and select Set to Default. 3. Enter your handset code. The default handset code is 0000. For details on changing the handset code, see To Change Handset Code on page 101. Ringer Volume You can adjust the ringer volume to one of 6 levels or a step tone. Settings Profiles 1. Highlight the profile you wish to customise. 2. Press [Options] and select Personalise.
(M 9)
(M 9-1) Settings Profiles Tone sound and vibration set can be customised for each profile according to your environment. There are 6 profiles including one user definable profile: Normal, Meeting, Activity, Car, Headset and Silent. Activating a Profile Settings Profiles 1. Select the desired profile. Note When a profile is set, the corresponding icon described on page 15 is displayed on the stand-by screen. Tip Press and hold R to switch Profiles settings between Normal and Silent mode during stand-by. Customising Profiles Settings Profiles 1. Highlight the profile you wish to customise. 2. Press [Options] and select Personalise. 84 Settings 3. Select Ringer Volume. The current volume level is displayed. 4. Press a to increase the ringer volume or press b
. to decrease the ringer volume and then press To select Step Tone, press a at level 5. To select Silent, press b at level 1. Assigning Ringtone You can select the ringtone from 28 tones including 5 patterns, 13 sound effects and 10 melodies. You can also select a sound in Saved Sounds as the default ringtone excluding the AMR or WAVE format. Settings Profiles 1. Highlight the profile you wish to customise. 2. Press [Options] and select Personalise. 3. Select Assign Ringtone. 4. Select Preset Sounds or My Sounds. 5. Select the ringtone you wish to use. To hear the demo play, press press again. To stop playing, 6. Press [Options] and select Assign. Note If you delete a ringtone that uses a sound in Saved Sounds, the default ringtone is set. Vibration When the vibrator option is set on, the phone will vibrate for incoming calls regardless of the ringer volume and tone settings. Settings Profiles 1. Highlight the profile you wish to customise. 2. Press [Options] and select Personalise. 3. Select Vibration. 4. Select from On, Off or On & Link to Sound. Tip When the On & Link to Sound option is selected in step 4, the vibrator synchronises with your selected melody to pulse in time with the melody. Please note that not all melodies support the On & Link to Sound option. Should you select such a melody, only the On option in step 4 will allow vibrator function. When you select On or On & Link to Sound in step 4, is displayed on the stand-by screen. Settings 85 Alerts You can personalise profiles for alerts including warning tone, message alert and low battery alert. Warning Tone Your phone emits the warning tone when an error occurs. Settings Profiles 1. Highlight the profile you wish to customise. 2. Press [Options] and select Personalise. 3. Select Alerts. 4. Select Warning tone. 5. Select Switch On/Off. 6. Select Volume and select from High, Middle or Low. 7. Select Tone and select Preset Sounds or My Sounds. 8. Select Duration and select the desired time. Message Alert When receiving messages, special ringtones can be set. Settings Profiles 1. Highlight the profile you wish to customise. 2. Press [Options] and select Personalise. 3. Select Alerts. 4. Select Message Alert. 5. Select from Multimedia, Text or WAP. 6. Select Volume and select the desired volume. 7. Select Sound and select Preset Sounds or My Sounds. 8. Select Vibration and select from On, Off or On & Link to Sound. 9. Select Duration and select the desired time. 86 Settings Keypad Tones When the keypad tone is set on, you will hear a confirmation tone each time you press any keys. Settings Profiles 1. Highlight the profile you wish to customise. 2. Press [Options] and select Personalise. 3. Select Keypad Tones. 4. Select Switch On/Off and select On. Select Off to cancel. 5. Select Volume and select from High, Middle or Low. 6. Select Tone and select from Preset Sounds, My Sounds or Default Tone. When selecting Default Tone, go to step 8. 7. Select the desired tone. For details on assigning the tone, see Assigning Ringtone on page 85. 8. Select Duration and select the desired time. Multimedia Volume You can adjust volume for Video Camera, Voice Recorder, Melody Editor, My Items, browser and multimedia messages. Settings Profiles 1. Highlight the profile you wish to customise. 2. Press [Options] and select Personalise. 3. Select Multimedia Volume. The current volume level is displayed. 4. Press a to increase the volume or press b to
. decrease the volume and then press To select Silent, press b at level 1. Power On Sound / Power Off Sound The phone can be set to emit a sound when it is switched on or off. You can define the volume, duration and the melody to be used for this task. Settings Profiles 1. Highlight the profile you wish to customise. 2. Press [Options] and select Personalise. 3. Select Power On Sound or Power Off Sound. 4. Select Volume and select the desired volume. 5. Select Sound and select Preset Sounds or My Sounds. 6. Select Duration and select the desired time. Settings 87
(M 9-2) Setting the Display You can change the settings of the screen. Wallpaper For the stand-by screen, 3 pictures are provided. Pictures taken with the digital camera or images downloaded from a WAP site can be used for wallpapers. Setting My Pictures Settings Display Wallpaper My Pictures 1. Select the desired picture. 2. After displaying the picture, press 3. Specify the area you wish to display using the
. navigation keys. Note Some pictures cannot be used because of their picture and data types. Echo Reduction This function is for reducing irritating echoes, especially when using the handsfree car kit. Settings Profiles 1. Highlight the profile you wish to customise. 2. Press [Options] and select Personalise. 3. Select Echo Reduction. 4. Select On or Off. Any Key Answer You can also answer a call by pressing any key except F or [Busy]. For details, see page 19. Settings Profiles 1. Select the profile you wish to customise. 2. Press [Options] and select Personalise. 3. Select Any Key Answer. 4. Select On or Off. 88 Settings Assigning the Pictures Pictures can be displayed when turning the power on or off, when receiving an incoming call, or when operating the alarm. Pictures taken by a digital camera or images downloaded from a WAP site can be used. To Set Built-in Pictures Settings Display Graphics 1. Select the desired situation to set the picture. 2. Select Preset Animation when you select Power On or Power Off in step 1. Select Pattern 1, Pattern 2 or Pattern 3 when you select Incoming Call or Alarm in step 1. To Set My Pictures Settings Display Graphics 1. Select the desired situation to set the picture 2. Select My Pictures. 3. Select the picture. 4. Specify the area you wish to display using the navigation keys. Note Some pictures cannot be used because of their picture and data types. Setting the Greeting Message You can set the message which will appear when the phone is turned on. Settings Display Greeting Message Switch On/Off 1. Select On to display the greeting message when the phone is turned on. Select Off for no message. 2. Select Edit Message and enter the message. Up to 16 characters can be stored as a message. For details on entering characters, see Entering Characters on page 24.
(M 9-2-4) Showing the Clock You can display the current date and/or time on the stand-by screen. Settings Display Show Clock 1. Select from Time Only, Date & Time or Off. Backlight You can turn the backlight of the screen on or off when you press the keypad or the optional cigarette lighter charger is connected to the phone. You can change time the backlight is on for, which will help conserve battery life. Settings 89 Tip When you purchase this phone, Backlight is set to 15 seconds. To Select the Backlight Time Out Settings Display Backlight Time Out 1. Select On or Off. To Turn On/Off the Backlight whilst Charging with the Cigarette Lighter Charger With this setting On, the phones backlight is on when the cigarette lighter charger is connected. Settings Display Backlight In Car 1. Select the desired time. Adjusting the Brightness of the Backlight You can adjust the brightness of the backlight of the screen from 4 levels. Settings Display Brightness 1. Adjust the brightness by pressing a (Light) and b
(Dark) for maximum clarity. 2. Press
. 90 Settings Setting the Display Saving This phones screen will automatically turn off after a given amount of time. You can change the time before the Display Saving will go into effect, which will help conserve battery life. Tip When you purchase this phone, Display Saving is set to 2 minutes. Settings Display Display Saving 1. Select the desired time. Note Display Saving does not work whilst you are calling, using WAP, or using an application. To cancel the Display Saving: The display saving continues until either a key is pressed or there is an incoming alert. The first key press only cancels this function. You must press another key in order to input any numerical or text value.
(M 9-2-8) Display Setting Reset The phone settings can be reset to their default settings. Settings Display Set to Default 1. Enter your handset code.
(M 9-4-1)
(M 9-4) Call Settings Set various types of functions and services. Diverts This service is used to divert incoming calls to your voice mail system or to another number depending on certain conditions in which you cannot answer a call. To Divert Calls Settings Call Settings Diverts 1. Select one of the following options. All Calls:
Diverts all voice calls without ringing. When Busy: Diverts incoming calls when you No Answer:
are on a call. Diverts incoming calls if you do not answer a call within a certain period of time. Not Reachable: Diverts incoming calls when your phone is out of network service or switched off. 2. Select On. 3. Enter a phone number to which you wish to divert calls or search for it in the Contacts List. (p. 31) 4. Press
. If you select No Answer in step 1:
5. Select the period of time from 6 levels (05 to 30 seconds). Note When a divert is set to All Calls, on the stand-by screen. is displayed Tip If you select By Service in step 2, you can select further divert options. To Check the Divert Status Settings Call Settings Diverts 1. Select the divert option you wish to check. 2. Select Status. You can check the status of the selected divert option. Settings 91
(M 9-4-2) Call Waiting If you wish to be able to receive another incoming call whilst you have a call in progress, you must activate the Call Waiting service. Settings Call Settings Call Waiting 1. Select On or Off. Note The Call Waiting service may not be available on all mobile phone networks. Contact your network operator for more information.
(M 9-4-3) Showing Your Phone Number This lets you control whether to show your phone number when calling another party or not. Some networks do not support this service. Please check with your service provider for availability. Settings Call Settings Show Your Number 1. Select On or Off. Note Some networks do not support this service. Please check with your service provider for availability.
(M 9-4-4) Restrict Calls This function lets you place restrictions on incoming and outgoing calls. To activate this option you will need the specified password, which is available from your service provider. Settings Call Settings Restrict Calls 1. Select from Outgoing Calls or Incoming Calls. Outgoing Calls:
Incoming Calls:
2. (For Outgoing Calls) Select Bar Foreign Calls or Bar All Outgoing Calls. Bar Foreign Calls:
Restricts outgoing calls. Restricts incoming calls. Restricts all outgoing international calls. Bar All Outgoing Calls:
Restricts all outgoing calls except emergency calls. Only Local & Home:
Restricts all outgoing international calls except to your home country.
(For Incoming Calls) Bar All Incoming Calls:
Restricts all incoming calls. 92 Settings Bar if Abroad:
Restricts all incoming calls when you are outside of the coverage from your registered network operator. 3. Select one of the following options. All Services:
Voice Calls:
Data:
Fax:
Messages:
All except msgs:
Restricts all services. Restricts all voice calls. Restricts all data calls. Restricts all fax calls. Restricts all messages. Restricts all services except messages. 4. Select On or Off. 5. Enter the network password. To Cancel Settings Settings Call Settings Restrict Calls 1. Select Outgoing Calls or Incoming Calls. 2. Select Cancel All. 3. Enter the network password. Fixed Dialling No. When the Fixed Dialling No. is enabled, you can only call predefined numbers. To Enable Fixed Dialling No. Settings Call Settings Restrict Calls Fixed Dialling No. 1. Enter your PIN2 code. 2. Select Switch On/Off. 3. Select On or Off. To Add a New Name Settings Call Settings Restrict Calls Fixed Dialling No. 1. Enter your PIN2 code. 2. Select Edit Dial List. 3. Press [Options] and select Add New Contact. 4. Add a name and a phone number. For details on adding a name and a phone number, see Add New Contact on page 30. 5. Press [Save]. Settings 93 Changing the Network Password Settings Call Settings Restrict Calls Change Password 1. Enter the old network password. 2. Enter a new network password. 3. Enter a new network password again. If you enter the incorrect password, you are asked to enter the password again. 4. Press Auto Redial (M 9-4-5) See Automatic Redialling on page 19. Minute Minder (M 9-4-6) Minute Minder function informs you of your talk time by sounding a tone after every minute. Settings Call Settings Minute Minder 1. Select On or Off. Call Setting Reset (M 9-4-7) The call settings can be reset to their default settings. Settings Call Settings Set to Default 1. Enter your handset code.
(M 9-5) Date & Time You need to set the correct time and date in order for your phones various time-based functions to work correctly. Settings Date & Time Set Date/Time 1. Enter the day, month, year and time using the digit keys. Tip When you enter the time in the 12-hour format, press P to switch between am and pm. The order in which the date and time is displayed is based on the format setting. Selecting the Time Format Settings Date & Time Time Format 1. Select 12 hour or 24 hour. Selecting the Date Format Settings Date & Time Date Format 1. Select from D.M.Y, M-D-Y, or Y/M/D. Setting the Daylight Saving Settings Date & Time Daylight Saving 1. Select On or Off. 94 Settings Setting the Time Zone Settings Date & Time Time Zone Change Zone 1. Press c or d to select the home city to set. Customising the Time Zone Settings Date & Time Time Zone Set Custom Zone 1. Enter the time-zone differences using the digit keys. Pressing P switches between and +.
(M 9-6) Changing the Language You can change the language that the phone uses to display messages. Settings Language 1. Select the desired language. Tip You can also change the input language on the text entry screen (p. 25). Note If you select Automatic in step 1, the language preset on the SIM card is selected. If the language preset on the SIM card is not supported, then the default language of the phone is selected.
(M 9-7) Connectivity By using this menu, you can connect your phone to a Bluetooth wireless technology enabled device via the connection, or to a PC via the Infrared connection or a USB cable. Using the Bluetooth Wireless Function
(M 9-7-1) To Turn On or Off Settings Connectivity Bluetooth Switch On/Off 1. Select On or Off. If the infrared setting has been activated, you will be asked whether you wish to deactivate it or not. Press
[ Yes]. The Bluetooth wireless setting is activated, and is displayed on the stand-by mode screen. Settings 95 To Activate a Device Settings Connectivity Bluetooth Paired Devices 1. Select the device you wish to activate. Tip You can save battery power by turning the Bluetooth wireless function off whilst it is not in use. Turn the Bluetooth wireless function off in To Turn On or Off on page 95 or in To Turn Off Automatically. During a call, you can divert voice call to the paired device. Press [Options] and select Enable Bluetooth. If you wish to disconnect the paired device, select Disable Bluetooth. To Rename a Device Settings Connectivity Bluetooth Paired Devices 1. Highlight the device you wish to rename. 2. Press [Options] and select Change Name. 3. Rename the device. To Search for Devices to be Paired For using the Bluetooth wireless function, you need to search for other Bluetooth wireless technology enabled devices to establish contact with your phone. Keep your phone within a distance of 10 metres before searching. Settings Connectivity Bluetooth Search for Devices The phone starts searching for devices within 10 metres. 1. Select the desired device for pairing. 2. Enter the device passcode. Note If the Bluetooth wireless function is off before searching, the phone turns the Bluetooth wireless function on automatically and starts searching. If the infrared function is active, the confirmation screen to deactivate the infrared function is displayed. Press [Yes] to deactivate. You can only select one device for pairing. To change the paired device, see Paired Devices. Paired Devices You can activate, rename, and delete the paired device in the list. 96 Settings To Clear a Device Name Settings Connectivity Bluetooth Paired Devices 1. Highlight the device you wish to clear. 2. Press [Options] and select Delete. Bluetooth Wireless Settings You can prevent other GX15 phones from recognising your phone, or turn the Bluetooth wireless function off automatically to save battery power. To Show or Hide Your Phone Settings Connectivity Bluetooth Bluetooth Settings Visibility 1. Select the desired visibility settings:
Show My Phone: Allows other devices to recognize your phone. Hide My Phone: Hides your phone from other devices. To Turn Off Automatically Settings Connectivity Bluetooth Bluetooth Settings Bluetooth Time Out 1. Select the desired time. Your phone turns the function off automatically for the specified time. Using the Infrared Function To Turn the Infrared Function On or Off (M 9-7-2) Settings Connectivity Infrared 1. Select On or Off. If the Bluetooth wireless function has been activated, you will be asked whether you wish to deactivate it or not. Press [Yes]. will appear on the screen. The infrared setting will return to off when no data is transmitted/received via infrared communication.
(M 9-7-3) PC Software By connecting your phone to a PC, you can transmit pictures, sounds, video clips, and Contacts List entries. Follow the procedure to select the connection method
(Bluetooth wireless, USB or Infrared connection). For details on getting the link software, see page 103. Settings Connectivity PC Software 1. Select the desired connection type from Data Cable, Infrared or Bluetooth. Settings 97 4. Enter a new network name. To Change the Position of a Network in the Preferred List Settings Network Select Network Set Preferred 1. Select the name of the network to change the position in the list. 2. Select Insert or Add to end. To Delete a Network from the Preferred List Settings Network Select Network Set Preferred 1. Select the name of the network you wish to delete. 2. Select Delete WAP/MMS Settings Note In normal operations, you do not need to change settings.
(M 9-8) Network Network Settings To Select a Network Automatically Each time the power is turned on, your phone always tries to connect to the preferred network. If your phone is not connected to the network, you can perform the following immediately to establish the preferred network connection. Settings Network Select Network Automatic To Set the Network Manually Settings Network Select Network Manual 1. Select the desired network. To Add a New Network Settings Network Select Network Add New Network If there is no entry, press If there is an entry, press steps. 1. Select Add. 2. Enter the country code. 3. Enter the network code. and go to step 2. and perform the following 98 Settings WAP Settings (*: Item to be set as mandatory) Profile Name*: WAP profile name (Unique name) IP Address*:
Homepage:
Port Number*:
Circuit Prompt (Enable or Disable):
IP address Homepage Security option (1024-65535) Circuit prompt Connection Type (GPRS Then CSD, GPRS or CSD):
GPRS Settings:
Bearer connection type Bearer connection type Access point name APN*:
Username: Username Password:
Password Linger Time: Linger time (0-99999 sec.) CSD Settings:
Bearer connection type ISDN or analogue Phone No.*: Access point number Line Type:
Username: Username Password:
Password Linger Time: Linger time (0-99999 sec.) MMS Settings (*: Item to be set as mandatory) Profile Name*: MMS profile name (Unique name) IP Address*:
IP address Relay Server URL*:MMS relay server Port Number*:
Connection Type (GPRS Then CSD, GPRS or CSD):
GPRS Settings:
Security option (1024-65535) Bearer connection type Bearer connection type Access point name APN*:
Username: Username Password:
Password Linger Time: Linger time (0-99999 sec.) CSD Settings:
Bearer connection type ISDN or analogue Phone No.*: Access point number Line Type:
Username: Username Password:
Password Linger Time: Linger time (0-99999 sec.) Settings 99 To Activate the WAP/MMS Profile Settings Network 1. Select from WAP Settings or MMS Settings. 2. Highlight the desired profile. 3. Press [Options] and select Activate. To Edit the WAP/MMS Profile Settings Network 1. Select from WAP Settings or MMS Settings. 2. Highlight the desired profile. 3. Press [Options] and select Edit. 4. Edit the desired item and select [Save]. To Copy the WAP/MMS Profile Settings Network 1. Select from WAP Settings or MMS Settings. 2. Highlight the desired profile. 3. Press [Options] and select Copy. 4. Edit the new profile name. To Delete the WAP/MMS Profile Settings Network 1. Select from WAP Settings or MMS Settings. 2. Highlight the desired profile. 100 Settings
(M 9-9-1) 3. Press [Options] and select Delete. Security
(M 9-9) Auto Keypad Lock By setting this option on, your phone will lock the keypad in 20 seconds automatically if no operation is performed. Settings Security Auto Keypad Lock 1. Select On or Off. Enabling/Disabling the PIN Code If the PIN code is enabled you are asked to enter the PIN code each time the phone is switched on. Your PIN code is stored on the SIM card and you should have been made aware of the code when you purchased the SIM card. Contact your service provider for further details. Settings Security PIN Entry 1. Select On to enable the PIN code.
(M 9-9-2) Select Off to disable it. 2. Enter your PIN code. Settings Security Handset Lock 1. Select On or Off. 2. Enter your handset code. To Change Handset Code Before you change the handset code, select On in step 1 in Handset Lock. The default handset code is 0000. Settings Security Handset Lock Change code 1. Enter the old handset code. 2. Enter a new handset code. 3. Enter the new handset code again. Master Reset All settings can be reset to their default settings. Settings Master Reset 1. Enter your handset code.
(M 9-0) Note If you enter the wrong PIN code three times in step 2, the SIM card will lock. To remove the lock, contact your service provider/SIM card vendor. To Change PIN Code This allows you to change the PIN code stored on the SIM card. Before you change the PIN code, select On in step 1 in Enabling/Disabling the PIN Code. Settings Security Change PIN 1. Enter the existing PIN code. 2. Enter new PIN code. 3. Enter the new PIN code again. Changing PIN2 Code (M 9-9-3) PIN2 code is used to protect certain functions in the phone such as Fixed Dialling No. and call cost limits. The following shows you how to change PIN2 code. Settings Security Change PIN2 1. Enter the existing PIN2 code. 2. Enter a new PIN2 code. 3. Enter the new PIN2 code again. Handset Lock The Handset Lock is an additional security feature which prevents unauthorised use of the phone or certain features.
(M 9-9-4) Settings 101 Connecting GX15 to Your PC You can use the following functions by connecting the GX15 to your PC using an infrared port, USB port* or Bluetooth wireless technology:
GSM/GPRS modem Handset Manager for GX15 Bluetooth wireless connection
* Requires an optional USB data cable XN-1DC30 for USB port connection. System Requirements Operating System: Windows 98*, Windows Me, Windows 2000**, Windows XP***
* Windows 98 Second Edition, Windows 98 Service Pack 1
** Service Pack 4
***Service Pack 1a Microsoft Outlook/Outlook Express Interface: Infrared port or USB port CD-ROM drive GSM/GPRS Modem You can use GX15 as a GSM/GPRS modem to access the Internet from your PC. Connect your phone to your PC via the Infrared connection or a USB cable and install the necessary software. For details, see Software Installation on page 103. Modem via the Infrared Connection To use the modem function via the Infrared connection, see Using the Infrared Function on page 97 and turn the modem function on. Modem via the USB Cable To use the modem function using a USB cable, use the cable mentioned above and see the instructions accompanying the cable. For details on software support, refer to the following site:
http://www.sharp-mobile.com Note Modem communication is not possible whilst communicating with the Handset Manager via the Infrared connection or USB cable. 102 Connecting GX15 to Your PC Handset Manager You can transmit the following items between your phone and your PC, and can use Contacts List entries on your PC. My Items entries Contacts List entries Short messages To use the Handset Manager function, see PC Software on page 97 and set your phone to Data Transfer mode. For details on software support, refer to the following site:
http://www.sharp-mobile.com Software Installation 1. Insert the supplied CD-ROM into your CD-ROM drive. The GX15 CD-ROM screen is displayed. If the GX15 CD-ROM screen is not displayed, double-click [Launcher.exe] in your CD-ROM. 2. Press the desired button. The installation starts. 3. Follow the on-screen instructions to complete installation. Note Infrared communication Infrared ports need to be aligned with each other. Infrared port Connecting GX15 to Your PC 103 Infrared ports need to be placed within 20 cm of each other and within a 30 angle. It is not recommended that you make or answer a call during data communication. The operation may be interrupted. GSM/GPRS modem It is not recommended that you make or answer calls when you are using GX15 as a GSM/GPRS modem. The operation may be interrupted. When transmitting data via infrared communication, you need to set the infrared setting to On. (p. 97) Handset Manager Some large files may not be able to be transmitted from the PC to the phone. When connecting your phone to a PC, you need to select the connection method for PC Software. (p. 97) The phone may not recognize the USB data cable if it is connected whilst an application (Camera, My Items, etc.) is running. Connect the USB data cable during stand-by. Applications (Camera, My Items, etc.) do not run when the phone is connected to the PC by IrDA or USB data cable. 104 Connecting GX15 to Your PC Troubleshooting Problem Solution The phone does not turn on. Make sure the battery is properly inserted and charged. Make sure you have entered the correct code (4 to 8 digits). Your SIM card/protected functions will become locked after 3 unsuccessful attempts. Contact your SIM provider if you do not have the correct PIN code. Enter PUK code (8 digits) provided by your service provider (if supported). If the attempt is successful, enter the new PIN code and confirm your phone is operational again. Otherwise contact your dealer. Adjust the backlight brightness for the main display. PIN code or PIN2 code is rejected. The SIM card becomes locked. The display is difficult to read. Problem Solution Phone functions do not work after the phone is turned on. Calls cannot be made or received. Check the radio signal strength indicator as you may be outside the service area. Check to see if any error message is displayed when you turn your phone on. If so, contact your dealer. Make sure the SIM card is correctly inserted. If the message SIM card error is displayed at start-up, you cannot use your SIM card or the SIM card is damaged. Contact your dealer or network service provider. Check your call barring, fixed dialling setting, remaining battery and call forwarding settings. Check if your phone is currently performing data communication using Infrared
(IrDA) or a data cable. Check the remaining balance if you are using a pre-paid SIM card. Troubleshooting 105 Problem Limited memory available. Call is terminated unexpectedly. No entries are displayed in the Contacts List Fax transmission failure Solution Delete any unnecessary data. Magnetised objects such as health necklaces placed near the phone may terminate the call. Keep your phone away from such objects. Confirm that the Contacts Location setting (Handset or SIM) and View Groups setting are made correctly. Before transmitting fax data, configure your fax software to use the software flow control. Use of the optional data cable is recommended for transmitting fax data. Problem Solution Call quality is poor. Cannot access network service. Cannot send or receive Text Message. Cannot connect to Multimedia Message service provider. Your current location may not provide good call quality (i.e., in a car or train). Move to a location where radio signal strength is greater. Check where your account has been registered and where the service is available. Make sure you are correctly subscribed for the Short Message Service, that the network supports this service, and that the centre number is set up correctly. If not, contact your network service provider. MMS settings and configuration may be missing or incorrect or the network does not support it. Check your service providers access point number. Contact your service provider to confirm the correct settings. 106 Troubleshooting Safety Precautions and Conditions of Use Your phone conforms to international regulations insofar as it is used under normal conditions and in accordance with the following instructions. CONDITIONS OF USE Electromagnetic waves Do not switch on your phone aboard an aircraft (as your phone may interfere with the aircrafts electronic systems). Current legislation forbids this use and legal action can be taken against the user. Do not switch on your phone in a hospital, except in designated areas. Use of your phones function may affect the performance of medical electronic units
(pacemakers, hearing aids, insulin pumps, etc.). When the phone function is on, do not bring it near medical equipment or into areas in which medical equipment is being used. If you have a hearing aid or a pacemaker, only use the phone on the opposite side of your body from where it is located. The phone should be kept at least 6 inches (15.24 cm) from a pacemaker ANYTIME the phone is switched on. Do not switch on your phone near gas or flammable substances. Observe the rules concerning the use of mobile phones at gasoline stations, chemical plants and at all sites where a risk of explosion exists. Caring for your phone Do not allow children to use your phone without supervision. Do not open or attempt to repair your phone yourself. The product can only be repaired by authorised service personnel. Do not drop your phone or subject it to severe impacts. Bending the body and pushing the display or keys with extreme force could damage the phone. Do not use solvents to clean your phone. Use only a soft, dry cloth. Do not carry your phone in your back pocket as it could break when you sit down. The display is made of glass and is particularly fragile. Avoid touching the external connector on the underside of the phone, since the delicate components within can be damaged by static electricity. Safety Precautions and Conditions of Use 107 Recommended temperature for using and storing batteries is approximately 20C. The batteries performance is limited in low temperatures, particularly below 0C and the phone may not work temporarily regardless of the amount of remaining battery power. Exposing the phone to extreme temperatures will shorten battery life. The battery can be charged and discharged hundreds of times but it will eventually wear out. When the operating time (talk-time and stand-by time) is noticeably shorter than normal, it is time to buy a new battery. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE, DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS See Battery Disposal on page 11. Battery Use your phone only with batteries, chargers and accessories recommended by the manufacturer. The manufacturer disclaims any liability for damage caused by the use of other chargers, batteries or accessories. Network configuration and phone usage will affect talk-time and stand-by time. Using the games or camera will hasten battery consumption. When the battery charging alert is displayed on the screen, charge the battery as soon as possible. If you continue using your phone ignoring the alert, the phone may cease to function, and all data and settings you have stored may be lost at any moment. Before removing the battery from the phone, make sure the phone is switched off. Replace and charge the new battery as soon as possible after removing the old one. Do not touch the battery terminals. Batteries can cause damage, injury or burns if a conductive material touches exposed terminals. When the battery is detached from the phone, use a cover made of non-
conductive material for keeping and carrying the battery safely. 108 Safety Precautions and Conditions of Use Aerial Care Do not touch the aerial unnecessarily, whilst using the mobile phone. If it is held, call quality may be hindered leading to shortened talk-time and stand-by time because the mobile phone may have to operate on a higher power level than is necessary. Use only the aerial supplied or one approved by Sharp for your mobile phone. Using unauthorised or modified aerials may damage the mobile phone. Moreover, since the mobile phone may violate the appropriate regulations, it may lose performance or exceed the limitation of SAR levels. To avoid impaired performance, do not damage the aerial of the mobile phone. Whilst talking directly to the microphone, please hold the mobile phone so that the aerial is upwards over your shoulder. To avoid interfering with blasting operations, please turn off the mobile phone in a blasting area or in a place where a turn off two-way radio sign is posted. Camera Operation Learn picture quality, file formats, etc. beforehand. The taken pictures can be saved in JPEG format. Be careful not to move your hand whilst taking pictures. If the phone moves whilst taking a picture, the picture can be blurred. When taking a picture, hold the phone firmly to prevent it from moving, or use the delay timer. Clean the lens cover before taking a picture. Fingerprints, oils, etc. on the lens cover hinder clear focusing. Wipe them off with a soft cloth before taking a picture. Others As with any electronic storage unit, data may be lost or corrupted under various circumstances. Before connecting the phone with a PC or a peripheral unit, read the operation manual for the other unit carefully. If the phones battery has been removed for some time, or the phone has been reset, the units clock and calendar may be reinitialised. The date and time should be updated in this case. Use only the specified handsfree kit (option). Some phones functions may not work when unauthorised handsfree kit is used. Safety Precautions and Conditions of Use 109 The manufacturer disclaims any liability for damage which may result as a consequence of improper use or use contrary to the instructions contained herein. ENVIRONMENT Keep your phone away from extreme heat. Do not leave it on the dashboard of a car or near a heater. Do not leave it in any place that is extremely damp or dusty. Since this product is not waterproof, do not use it or store it where fluids such as water can splash onto it. Raindrops, water spray, juice, coffee, steam, perspiration, etc. will also cause a malfunction. PRECAUTIONS CONCERNING VEHICLE USE It is the users responsibility to check the local laws governing the use of a mobile phone in vehicles. Pay full attention to driving. Pull off to the side of the road, park the car, and switch off the engine before making or answering a call. Use of your phones function may interfere with the vehicles electronic systems, such as the ABS anti-
lock brakes or the air-bag. To ensure no such problem occurs, please check with your dealer or car manufacturer before connecting your phone. Only allow qualified service maintenance personnel to install the vehicle accessories. 110 Safety Precautions and Conditions of Use SAR Your Sharp mobile phone has been designed, manufactured and tested so as not to exceed the limits for exposure to electromagnetic fields recommended by the Council of the European Union. These limits are part of comprehensive guidelines developed by independent scientific organisations. The guidelines include a substantial safety margin designed to assure the safety of the phone user and others and to take into account variations in age and health, individual sensitivities and environmental conditions. European standards provide for the amount of radio frequency electromagnetic energy absorbed by the body when using a mobile phone to be measured by reference to the Specific Absorption Rate (SAR). The SAR limit for the general public is currently 2 watts per kilogram averaged over 10 grams of body tissue. Your Sharp mobile phone SAR value is x.xxx watts per kilogram. This has been tested to ensure that this limit is not exceeded even when the phone is operating at its highest certified power. In use however your Sharp mobile phone may operate at less than full power because it is designed to use only sufficient power to communicate with the network. PRECAUTIONS FOR USE IN USA FCC Declaration of Conformity This mobile phone GX15 with PC/Data interface cable XN-1DC30 complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party:
SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430 TEL: 1-800-BE-SHARP Tested To Comply With FCC Standards FOR HOME OR OFFICE USE FCC Notice The phone may cause TV or radio interference if used in close proximity to receiving equipment. The FCC can require you to stop using the phone if such interference cannot be eliminated. Safety Precautions and Conditions of Use 111 Information To User This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient/Relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the users authority to operate the equipment. Exposure to Radio Waves THIS MODEL PHONE MEETS THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.* Tests for SAR are conducted using standard operating positions specified by the FCC with 112 Safety Precautions and Conditions of Use the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 0.352 W/kg and when worn on the body, as described in this user guide, is 0.544 W/kg. Body-worn Operation; This device was tested for typical body-worn operations with the back of the phone kept 1.5 cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 1.5 cm separation distance between the user's body and the back of the phone. The use of belt-clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID APYHRO00035. Additional information on Specific Absorption Rates
(SAR) can be found on the Cellular Telecommunications & Internet Association (CTIA) web-site at http://www.phonefacts.net.
* In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/
kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. Safety Precautions and Conditions of Use 113 Index A Accessories 7 Alarms 70 Any Key Answer 88 Auto Keypad Lock 100 B Battery 10 Bluetooth wireless function 95 C Calculator 71 Calendar 78 Call Costs 83 Call functions 18 Answering 19 Earpiece volume 20 Holding 21 Letting the caller know you are unavailable 20 Making 18 Making another call during a call 21 Muting 23 Putting on hold 21 Redialling 19 114 Index Rejecting 20 Speed dialling 18 Call Log 81 Call settings 91 Auto Redial 94 Call Waiting 92 Fixed Dialling No. 93 Minute Minder 94 Network password 94 Resetting 94 Restrict Calls 92 Show Your Number 92 Call Timers 82 Call Waiting 21, 92 Cell Broadcasts 51 Centre key 8 Centre key/Navigation keys 15 Conference Call 22 Contacts List 29 Changing the list 29 Creating 30 Dialling 31 Editing 32 Finding 31 Memory status 33 Receiving 34 Sending 34 D Date & Time 94 Digital camera 35 Display indicators 15 Display language 95 Display settings 88 Diverts 91 E Earpiece volume 20 Emergency calls 18 H Handset code 101 Handset Lock 101 I Infrared function 97 Infrared port 9 Input languages 25 Input method 25 International calls 18 J Java applications 65 K Keypad Lock 14 L Left soft key 8 M Master Reset 101 Melody Editor 73 Memory status 64 Menu and shortcut 27 Multimedia message 43 Confirming arrival of delivery report 46 Creating 43 Inserting attached data 45 Reading 45 Retrieving 46 Setting up 46 Storing the phone number or e-mail address of a sender in the Contacts List 46 Turning the slide show setting on or off 44 My Numbers (Voice/Data/Fax) 82 N Navigation keys 8 Network settings 98 Adding a new network 98 Changing the position of a network in the Preferred List 98 Deleting a network from the Preferred List 98 Selecting a network automatically 98 P PC connection 102 PC Software 97 Phone Help 77 Phone settings Assigning pictures 89 Brightness of backlight 90 Changing language 95 Display saving 90 Greeting message 89 Resetting 90 Picture file 57 PIN code 100 PIN2 code 101 Power on and off 13 Profiles Activating 84 Any Key Answer 88 Customising 84 Echo reduction 88 Keypad tones 87 Resetting 84 Ringer volume 84 Vibration 85 R Right soft key 9 S Screensavers 66 Security 100 Auto Keypad Lock 100 Changing handset code 101 Changing PIN code 101 Changing PIN2 code 101 Enabling/Disabling PIN code 100 Fixed Dialling No. 93 Handset Lock 101 Self-portrait mirror 36 SIM Application 70 SIM card 10 Sound file 60 Sound settings Message Alert 86 Power Off Sound 87 Index 115 Power On Sound 87 Warning Tone 86 Speed Dial List 82 T Text message 48 Creating 49 Extracting phone numbers 50 Reading 49 Setting up 50 Text template 63 Troubleshooting 105 V Video camera 39 Video clip file 62 Vodafone live! 53 Voice mail key 9 Voice Recorder 72 116 Index
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2004-05-06 | 1850.2 ~ 1909.8 | PCE - PCS Licensed Transmitter held to ear | Original Equipment |
2 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2004-05-06
|
||||
1 2 | Applicant's complete, legal business name |
Sharp Corporation
|
||||
1 2 | FCC Registration Number (FRN) |
0005810866
|
||||
1 2 | Physical Address |
1 Takumi-cho, Sakai-ku, Sakai City
|
||||
1 2 |
Osaka, N/A 590-8522
|
|||||
1 2 |
Japan
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
m******@ccsemc.com
|
||||
1 2 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
1 2 |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
app s | FCC ID | |||||
1 2 | Grantee Code |
APY
|
||||
1 2 | Equipment Product Code |
HRO00035
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
M**** N******
|
||||
1 2 | Title |
Deputy General Manager, Head of Q&E promotion Unit
|
||||
1 2 | Telephone Number |
+81-5********
|
||||
1 2 |
n******@sharp.co.jp
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | PCE - PCS Licensed Transmitter held to ear | ||||
1 2 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 1900MHz GSM Cellular Phone W/Bluetooth | ||||
1 2 | 1900MHz GSM Cellular Phone W/ Bluetooth | |||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Output listed is EIRP. This device contains 800/1800 MHz GSM functions that are not operational in U.S. Territories. This filing is only applicable for 1900 MHz GSM operations. This device was tested with a 1.5 cm device-to-body spacing gap and was not tested with any body-worn accessories made by Sharp or any other manufacturer. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device, including its antenna whether extended or retracted, and the user body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values with Bluetooth are: Head: 0.352 W/kg; Body-worn: 0.544 W/kg. | ||||
1 2 | Output power listed is conducted. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Japan Quality Assurance Org.
|
||||
1 2 | Name |
K******** N******
|
||||
1 2 | Telephone Number |
81-72********
|
||||
1 2 | Fax Number |
81-72********
|
||||
1 2 |
n******@jqa.jp
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 24E | 1850.20000000 | 1909.80000000 | 1.4130000 | 2.5000000000 ppm | 241KGXW | ||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CE | 2402.00000000 | 2480.00000000 | 0.0010000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC